File:OpenXY bracket rev1.STL

From RepRap
Revision as of 01:43, 11 December 2012 by Bbv5002 (talk | contribs) (This is an STL version of the OpenXY bracket that is used by the OHM to secure the carriage to the rails and allow it to ride smoothly.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
OpenXY_bracket_rev1.STL ‎(file size: 28 KB, MIME type: unknown/unknown)
Warning: This file type may contain malicious code. By executing it, your system may be compromised.

This is an STL version of the OpenXY bracket that is used by the OHM to secure the carriage to the rails and allow it to ride smoothly.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeDimensionsUserComment
current01:43, 11 December 2012 (28 KB)Bbv5002 (talk | contribs)This is an STL version of the OpenXY bracket that is used by the OHM to secure the carriage to the rails and allow it to ride smoothly.
  • You cannot overwrite this file.

The following page links to this file:

Retrieved from "https://reprap.org/mediawiki/index.php?title=File:OpenXY_bracket_rev1.STL&oldid=74641"