File:Half-roundWasherBearing-half-washer bearings installed.jpg

From RepRap
Revision as of 06:57, 17 March 2010 by VikOlliver (talk | contribs) (Half-washer bearings installed in the extruder.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Half-roundWasherBearing-half-washer_bearings_installed.jpg ‎(530 × 260 pixels, file size: 28 KB, MIME type: image/jpeg)

Half-washer bearings installed in the extruder.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current01:44, 5 January 2006Thumbnail for version as of 01:44, 5 January 2006530 × 260 (28 KB)VikOlliver (talk | contribs)Half-washer bearings installed in the extruder.
  • You cannot overwrite this file.

The following page links to this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Camera manufacturerSONY
Camera modelCYBERSHOT
Exposure time1/80 sec (0.0125)
F Numberf/2.3
ISO speed rating120
Date and time of data generation15:35, 5 January 2006
Lens focal length15.8 mm
OrientationNormal
Horizontal resolution72 dpi
Vertical resolution72 dpi
File change date and time15:35, 5 January 2006
Y and C positioningCo-sited
Exposure ProgramNormal program
Exif version2.1
Date and time of digitizing15:35, 5 January 2006
Image compression mode2
APEX exposure bias0
Maximum land aperture2 APEX (f/2)
Metering modeCenter weighted average
Light sourceUnknown
FlashFlash did not fire
Color spacesRGB
Retrieved from "https://reprap.org/mediawiki/index.php?title=File:Half-roundWasherBearing-half-washer_bearings_installed.jpg&oldid=9064"