File:Clamp plate trapSideview.JPG

From RepRap
Revision as of 18:56, 12 April 2013 by Mbilyk (talk | contribs) (Connect the clamp the plate and nut trap.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Original file ‎(4,000 × 3,000 pixels, file size: 1.93 MB, MIME type: image/jpeg)

Connect the clamp the plate and nut trap.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current18:56, 12 April 2013Thumbnail for version as of 18:56, 12 April 20134,000 × 3,000 (1.93 MB)Mbilyk (talk | contribs)Connect the clamp the plate and nut trap.
  • You cannot overwrite this file.

The following page links to this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Camera manufacturerCanon
Camera modelCanon PowerShot ELPH 300HS
Exposure time1/60 sec (0.016666666666667)
F Numberf/2.7
ISO speed rating640
Date and time of data generation08:13, 26 February 2013
Lens focal length4.3 mm
OrientationNormal
Horizontal resolution180 dpi
Vertical resolution180 dpi
File change date and time08:13, 26 February 2013
Y and C positioningCo-sited
Exif version2.3
Date and time of digitizing08:13, 26 February 2013
Meaning of each component
  1. Y
  2. Cb
  3. Cr
  4. does not exist
Image compression mode3
APEX shutter speed5.90625
APEX aperture2.875
APEX exposure bias0
Maximum land aperture2.875 APEX (f/2.71)
Metering modePattern
FlashFlash did not fire, auto mode
Rating (out of 5)0
Retrieved from "https://reprap.org/mediawiki/index.php?title=File:Clamp_plate_trapSideview.JPG&oldid=88593"