File:3d printer frontside.jpg

From RepRap
Revision as of 03:17, 26 February 2009 by Laserman (talk | contribs) (3D-Printer Frontside)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
3d_printer_frontside.jpg ‎(600 × 450 pixels, file size: 103 KB, MIME type: image/jpeg)

3D-Printer Frontside

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current03:17, 26 February 2009Thumbnail for version as of 03:17, 26 February 2009600 × 450 (103 KB)Laserman (talk | contribs)3D-Printer Frontside
  • You cannot overwrite this file.

The following page links to this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Camera manufacturerCanon
Camera modelCanon PowerShot A570 IS
Exposure time1/60 sec (0.016666666666667)
F Numberf/2.6
ISO speed rating200
Date and time of data generation08:34, 26 February 2009
Lens focal length5.8 mm
OrientationRotated 90° CCW
Horizontal resolution180 dpi
Vertical resolution180 dpi
File change date and time08:34, 26 February 2009
Y and C positioningCentered
Exif version2.2
Date and time of digitizing08:34, 26 February 2009
Meaning of each component
  1. Y
  2. Cb
  3. Cr
  4. does not exist
Image compression mode5
APEX shutter speed5.90625
APEX aperture2.75
APEX exposure bias0
Maximum land aperture2.75 APEX (f/2.59)
Metering modePattern
FlashFlash fired, auto mode, red-eye reduction mode
Retrieved from "https://reprap.org/mediawiki/index.php?title=File:3d_printer_frontside.jpg&oldid=1710"