Comparison of Firmware

From RepRap
Revision as of 20:05, 7 July 2011 by Bubbapizza (talk | contribs) (Created page with 'This page provides a table with a comparison of features for all the different firmwares. It's *extremely* out of date. {|border="1" cellpadding="5" cellspacing="0" class="wik…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This page provides a table with a comparison of features for all the different firmwares. It's *extremely* out of date.


Firmware Author(s) Compatible electronics dc motor extruder? stepper extruder? extruder speed control? movement speed control? RepRap-style acceleration Start-stop ramping thermocouples? heated build platforms? Documentation Download
RepRap FiveD GCode Interpreter RepRap.org Gen 3, Pololu (more?) true true true true false true true install guide stable, dev
Sprinter - "Tonokip" firmware, aka "tesla" firmware (hydra-mmm derivative, discontinued), currently aka Sprinter (formerly Klimentkip/caruKlip) (active, with print from SD support and acceleration) tonok, tesla893, Kliment, caru, others arduino mega, most atmega chips? false true true true false true, constant or exponential acceleration experimental true No documentation stable(Kliment, caru), dev(tesla893)
Gen2OnABoard FiveD Gcode Interpreter Nick McCoy Gen2OnABoard true true true false src
MakerBot MakerBot.com Gen 3 (more?) true true true manual dev
Teacup Firmware Triffid_Hunter, Traumflug, jakepoz, others most (all?) boards with atmega168 or bigger, incl. gen3, RAMPS, etc (present, untested) true true true true true true true web & wiki src
Grbl Simen Svale Skogsrud Arduino Grbl page src