Budaschnozzle

From RepRap
Revision as of 14:44, 7 September 2011 by Steven-AlephObjects (talk | contribs) (Created page with '{{Development |image = DSC_0477.JPG |status = Working |name = BudaSchnozzle |description = Truly free/libre hot end |license = GPLv3 |author = Aleph Objects, Inc. |categories = […')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Crystal Clear action run.png
BudaSchnozzle

Release status: Working

DSC 0477.JPG
Description
Truly free/libre hot end
License
GPLv3
Author
Contributors
Based-on
[[]]
Categories
CAD Models
External Link



Intro

DSC 0477.JPG

Features

  • Aluminum Block Resistor Hotend
  • Easily assembled and torn down with no glue or ceramic
  • Wire Strain Relief
  • Includes machined aluminum and steel parts, and laser cut wooden parts

Specs

  • Size: (H,W,L) 55mm, 40mm, 40mm
  • Aluminum block resistor
  • Aluminum and copper heatsink
  • PEEK GF30 insulator
  • PTFE inner sleeve
  • Laser cut hard wood plates
  • Machined stainless steel back-up plate

Special Notes

  • A custom created thermal table has been created for the Honeywell 135-104LAG-J01 thermistor for use with the Buddhaschnozzle. The thermal table will be added to Sprinter firmware shortly [hint, hint]