BowenBot

From RepRap
Revision as of 20:09, 8 February 2011 by Buzz (talk | contribs) (removed unused template trash)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This page is a development stub. Please enhance this page by adding information, cad files, nice big images, and well structured data!

Crystal Clear action run.png
BowenBot

Release status: unknown

No image available.png
Description
documenting a generic tool/artpiece
License
Author
Contributors
Based-on
[[]]
Categories
CAD Models
External Link


Description

If anyone is interested this device [www.dwbowen.com] uses ABS 3.5" plastic discs connected to 4 inch nylon webbing. The conveyor is advanced by a 1 rpm AC gearhead motor. The webbing is stretched using a tensioning device and it seems to stay put during printing... at least enough for my purposes. The total length of the conveyor for this device is roughly 20'. I have also successfully used a 40' version.

Each time the device does a new print it centers itself. Before it begins printing the onion plant it puts down a 2" x 2" raft of ABS. This helps the prints stick to the discs as they get taller. Hope this helps. -Bowen - http://dev.forums.reprap.org/read.php?171,36933 - , quoted by --Sebastien Bailard 08:02, 24 February 2010 (UTC)