BIQ stand alone Sanguinololu or Ramps mounting

From RepRap
Revision as of 01:04, 4 December 2011 by Bodgeit (talk | contribs)
Jump to: navigation, search
Crystal Clear action run.png
stand alone Sanguinololu or Ramps mounting

Release status: working

SanguinololuRamps mounting.jpg
designed Specificaly for the stand alone Sanguinololu or Ramps mounting.
CAD Models
External Link

SanguinololuRamps mounting.jpg


Stand Alone RepRap controller mount board for Sanguinololu or Ramps PCBs with mounting for a standard 50mm cooling fan.

SanguinololuRamps mounting2.jpg

Stuff needed to build

4mm MDF 1 x Fix It Block

3 x 4mm 20mm long Screws

3 x 4mm nuts

4 x Brass Pcb Stand Offs

4 x 3mm 6mm long Screws


Print the PDF file Media:Example.ogg or the DXF file Media:Example.ogg

Then glue with glue stick to MDF.

Drill holes centers are marked.

3 Fix It Block holes 4mm or 5/32"

4 Fan mounting holes 5mm or 3/16"

Prusa / Mendel holes slots 3mm or 1/8"

8 PCB stand offs 2.5mm or 3/32"

Fan hole is 50mm or 2"

Cut out the slots

Cut out the finshed parts