BIQ Stepcon

From RepRap
Revision as of 11:57, 19 December 2011 by Glenn (talk | contribs) (catchg Category:BIQ electronics)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Crystal Clear action run.png
StepCon

Release status: experimental

BIQ-StepCon.jpg
Description
Revision 0.1
License
unknown
Author
Contributors
Based-on
[[]]
Categories
CAD Models
Eagle
External Link


Introduction

With many RepRap Controller now using the Stepstick or Pololu stepper driver boards. And many RepRappers with the OLD style of stepper controllers using the 10way IDC connector this PCB breaks the dependency on these smaller stepper controllers. Making it possible to Drive old style RepRap boards or large high current Stepper controllers for a CNC machine.

It is just a simple connection interface board allowing for RepRap controllers to be more versatile for Bigger machines.