BIQ Opto Endstop

From RepRap
Revision as of 01:37, 4 December 2011 by Bodgeit (talk | contribs)
Jump to: navigation, search
Crystal Clear action run.png
BIQ Opto Endstop

Release status: experimental

BIQOptoEndstop.jpg
Description
Revision 0.1
License
CC BY-NC-SA 3.0
Author
Contributors
Based-on
[[]]
Categories
CAD Models
Eagle
External Link


BIQOptoendstop.jpg

Introduction

A small low cost PCB < £1.00 for 3 bare PCBS

Low cost components.

Three circuit build configurations.

RepRap compatible Opto Endstop using an Opto End stop with a 0.5mm beam slightly smaller than the HB102 beam with of 0.8mm. The opening of the interrupter is 5mm allowing for a 3mm black perspex interrupter tag designed for use on Huxley Seedling but can be used on All RepRaps.

To be updated with files and pictures once the first PCBs arrive.

BIQOptoendstop2.jpg.jpg BIQOptoendstop3.jpg.jpg