Auzze's One Piece Hot End

From RepRap
Revision as of 05:59, 14 June 2013 by Traumflug (talk | contribs) (Clean up. Apparently abandoned, will ask Auzze wether this is real.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This is a place to document my one piece Hot End.

Crystal Clear action run.png
Example Development

Release status: unknown

No image available.png
Description
documenting a generic tool/artpiece
License
Author
Contributors
Based-on
Categories
CAD Models
External Link


This is 600 pixels wide, and on the left.

Bill of Materials/Parts List

  • 16mm x 16mm x 60mm Alum rod
  • 16mm x 40 mm PTFE rod
  • 4mm OD x 2mm ID x 60mm PTFE tube (see note 1)
  • 8K6 5% wire wound resister
  • Thermistor or 100K Themocoupler
Retrieved from "https://reprap.org/mediawiki/index.php?title=Auzze%27s_One_Piece_Hot_End&oldid=95840"