Amar's plastic processing system

From RepRap
Revision as of 07:45, 11 September 2013 by Abb()minat()r (talk | contribs) (Created page with "{{Development |status = Development |name = plastic processing system |description = 3D printer & filament extruder |license = |author = Abb()minat()r |reprap = ultimaker ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Crystal Clear action run.png
plastic processing system

Release status: Development

No image available.png
Description
3D printer & filament extruder
License
Author
Contributors
Based-on
Categories
CAD Models
External Link


Introduction

the objective of this project is to make a 3D printer and a filament extruder this will be accomplished using parts obtained locally and cheaply


3D Printer

The 3d printer will be similar to the ultimaker using the strong points of its design

progress pics


Filament Extruder

this will melt raw plastic pellets and turn them into feedstock(filament) to be used by the printer

the extruder will be made by improving upon the previous plastic extruders that have been or are being made but the design will be affected by availability of parts


progress pics