3DR

From RepRap
Revision as of 21:17, 3 January 2016 by DavidCary (talk | contribs) (mention another variant: the 3DR Simple Delta Printer)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Crystal Clear action run.png
3DR

Release status: working

Logo-3DR.jpg
Description
filament mixing delta printer.
License
ShareAlike Creative Commons V3 (CC-BY-SA 3.0)
Author
Contributors
Based-on
Categories
CAD Models
External Link


All information of this page was taken from RichRap's Github. All attribution goes to him (aka Richard Horne).

Description

3DR is a RepRap Delta printer. Designed by Richard Horne (Aka RichRap)

The design is highly inspired by the fantastic Rostock, Kossell and Tantillus 3D printers.

It's been performing well since May 2013 – but should be considered a work in progress.

The files here are provided for you to print, build, experiment and evolve the design how you choose, please share your experiences and modifications and do let me know if you build one.

Thank you for downloading, please be aware and abide by the license all these files for the RichRap 3DR Delta printer are covered by - Attribution - ShareAlike Creative Commons V3 (CC BY-SA 3.0) - http://creativecommons.org/licenses/by-sa/3.0/

This License is not greatly restrictive at all, so please don't forget to attribute my work and acknowledge the work by others that this is built on.

Many people and projects have provided inspiration for this printer design. I would like to thank everyone working on RepRap projects the world over. Special thanks to -

Johann C. Rocholl for all the great work on Delta printers and firmware.

Sublime for the fantastic Tantillus printer using Spectra fishing line as the drive component and the various other great parts and designs used in the construction of this Printer.

I hope this work has been of some use to you, if you wish to say hello or donate towards further developments please see my Blog here - www.richrap.blogspot.com

Many thanks - Richard Horne (RichRap)

My website - http://www.richrap.com

Catch me on Twitter @RichRap3D

Watch me on YouTube - http://www.youtube.com/user/RichRap2011

Please see www.reprap.org for information about the RepRap Project. Please visit the RepRap forum - http://forums.reprap.org/

Many thanks,

Rich.


Instructions

Assembly guides, sourcing and pictorial information will become available on http://www.richrap.com/ and http://www.richrap.blogspot.com/

Variants

  • The 3DR Simple Delta Printer [FIXME: make a separate page?]
    • JohnSL designed the 3DR Simple Delta Printer based on the 3DR design, using vitamins from a (Cartesian) Printrbot Simple and a few printed parts.
    • The '3DR "Simple" Delta Printer' RepRap discussion forum[1]-[2]
    • 'Building the 3DR "Simple" Delta Printer' blog posts[3]