https://reprap.org/mediawiki/api.php?action=feedcontributions&user=Senyor&feedformat=atomRepRap - User contributions [en]2024-03-29T12:02:09ZUser contributionsMediaWiki 1.30.0https://reprap.org/mediawiki/index.php?title=%D0%A3%D1%81%D1%82%D0%B0%D0%BD%D0%BE%D0%B2%D0%BA%D0%B0_%D0%9F%D0%9E_RepRap_%D0%BD%D0%B0_%D0%BA%D0%BE%D0%BC%D0%BF%D1%8C%D1%8E%D1%82%D0%B5%D1%80%D0%B5&diff=14009Установка ПО RepRap на компьютере2010-03-26T17:34:51Z<p>Senyor: /* Download */</p>
<hr />
<div>{{Template:Mendel Documentation Header Ru}}<br />
{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}}<br />
<br />
{|-<br />
[[Image:material-select.png|600px|right]]<br />
|<br />
{{Alternative Toolchain Notice|software|install}}<br />
<br />
<br />
__TOC__<br />
|}<br />
<br style="clear:both;"/><br />
<br />
==Предустановка==<br />
<br />
ПО RepRap совместимо с 32-битными версиями Linux и Microsoft Windows. Мы работаем над добавлением совместимости с Mac и 64-битными версиями Linux и Windows.<br />
<br />
Вам также понадобится установить виртуальную машину Java. Если у Вас она еще не установлена, возьмите её здесь: <br />
<br />
* [http://java.com/ http://java.com/]<br />
<br />
Программное обеспечение для компьютера под Windows с установленной Java версии 6 все еще содежит ошибки, поэтому если у Вас возникнут проблемы с Java 6 и ПО, попробуйте деинсталлировать Java 6 и установить последнюю версию Java 5 отсюда:<br />
<br />
* [http://java.sun.com/products/archive/ http://java.sun.com/products/archive/]<br />
<br />
Вам также понадобится загрузить и установить среду разработки Arduino, чтобы собрать прошивку микроконтроллера для Вашей машины RepRap. Она доступна здесь:<br />
<br />
* [http://arduino.cc/ http://arduino.cc/]<br />
<br />
Вам понадобится загрузить и установить дополнения Sanguino к Arduino. Возьмите их здесь:<br />
<br />
* [http://sanguino.cc/ http://sanguino.cc/]<br />
<br />
И, напоследок в этом разделе, Вы можете ознакомиться с программным обеспечением, полезным для работы с RepRap. Список находится здесь:<br />
<br />
* [[Полезные пакеты ПО]]<br />
<br />
==Загрузка==<br />
<br />
Загрузите дистрибутив RepRap с сайта Sourceforge:<br />
<br />
[http://sourceforge.net/projects/reprap/ http://sourceforge.net/projects/reprap/]<br />
<br />
Имеется множество файлов и архивов проекта, доступные для загрузки, однако, основной пакет (размером приблизительно 65 Мб) имеет имя вида reprap-nnnnnn-ггггммдд.zip. <br />
Где nnnnnn - это номер текущей версии машины RepRap, а ггггммдд - это дата выпуска. Это единственный файл, который Вам необходим.<br />
<br />
==Linux Installation==<br />
<br />
You can install and use RepRap in your own file-space under Linux. <br />
<br />
===In your own space===<br />
<br />
Unzip the downloaded file:<br />
<br />
<pre><br />
$ unzip reprap-nnnnnn-yyyymmdd.zip<br />
</pre><br />
<br />
This will create a directory called reprap-nnnnnn-yyyymmdd (with the name of the current RepRap machine and the distribution date substituted, clearly). To run the RepRap software simply move to that directory and run the file named reprap:<br />
<br />
<pre><br />
$ cd reprap-nnnnnn-yyyymmdd<br />
$ ./reprap<br />
</pre><br />
<br />
===Installing for all users===<br />
<br />
If you want RepRap to be available system-wide to all users, you will need to log in as the superuser to install it.<br />
<br />
Assume you downloaded reprap-nnnnnn-yyyymmdd.zip into the directory /xxx/yyy. Move to the directory /usr/local, then unpack it:<br />
<br />
<pre><br />
# cd /usr/local<br />
# unzip /xxx/yyy/reprap-nnnnnn-yyyymmdd.zip<br />
</pre><br />
<br />
Then move to the /usr/local/bin directory and create a short shell script called reprap using your favourite text editor (gedit in the example).<br />
<br />
<pre><br />
# cd /usr/local/bin<br />
# gedit reprap<br />
</pre><br />
<br />
Copy and paste these three lines into the script, then save it:<br />
<br />
<pre><br />
#!/bin/sh<br />
cd /usr/local/reprap-nnnnnn-yyyymmdd<br />
./reprap<br />
</pre><br />
<br />
(Don't forget to replace the nnnnnn and the yyyymmdd with the right strings for your distribution file.)<br />
<br />
Finally, set execute permission on the file:<br />
<br />
<pre><br />
# chmod 755 reprap<br />
</pre><br />
<br />
Any user will now be able to run the software just by typing the command "reprap".<br />
<br />
There is a RepRap teardrop symbol in the file /usr/local/reprap-nnnnnn-yyyymmdd/reprap-icon.png which people can use if they add the program to their desktop or task-bar as a clickable executable. The program is /usr/local/bin/reprap .<br />
<br />
If you want to save space, you can now delete the distribution .zip file:<br />
<br />
<pre><br />
# rm /xxx/yyy/reprap-nnnnnn-yyyymmdd.zip<br />
</pre><br />
<br />
==Linux AMD64==<br />
<br />
The reprap software comes with rxtx and java3d binaries needed for 32bit arcitectures so getting the reprap software working on amd64 either means installing 32bit version of java or installing native 64bit versions of the libraries. For the latter option here is how you can set it up.<br />
<br />
For java3d its a simple these can simply be installed using<br />
sudo apt-get install libjava3d-jni<br />
For rxtx you can download binaries for the latest stable version [http://rxtx.qbang.org/pub/rxtx/rxtx-2.1-7-bins-r2.zip here] expand the zip using<br />
unzip Downloads/rxtx-2.1-7-bins-r2.zip<br />
copy the 64 bit binary to /usr/lib<br />
sudo cp rxtx-2.1-7-bins-r2/Linux/x86_64-unknown-linux-gnu/librxtxSerial.so /usr/lib<br />
Now all that has to be done is to soft link these libs to where the reprap software expects them to be<br />
cd reprap-mendel-20100105<br />
rm libj3dcore-ogl.so<br />
rm librxtxSerial.so<br />
ln -s /usr/lib/jni/libj3dcore-ogl.so<br />
ln -s /usr/lib/librxtxSerial.so<br />
<br />
[[User:GilesBathgate|GilesBathgate]] 10:50, 16 January 2010 (UTC)<br />
<br />
==Windows Installation==<br />
<br />
You will need administrator privileges to do this.<br />
<br />
Create a new folder:<br />
<br />
<pre><br />
C:\Program Files\Reprap<br />
</pre><br />
<br />
Unpack the ZIP file anywhere you like on your system. It will create a folder called reprap-nnnnnn-yyyymmdd where nnnnnn is the name of the current RepRap machine and yyyymmdd is the date of the release. Move all the files in that folder into C:\Program Files\Reprap. <br />
<br />
You can then delete the reprap-nnnnnn-yyyymmdd if you like, and the ZIP file.<br />
<br />
In C:\Program Files\Reprap there is a .BAT file called reprap.bat. Running that will launch the RepRap host software. You can copy that .BAT file to your desktop or elsewhere to give you a clickable executable.<br />
<br />
==Source Code==<br />
===Distribution Contents===<br />
<br />
Information on the files in the RepRap distribution are available at [[RepRap Distribution Files]].<br />
<br />
===Getting the latest sources===<br />
<br />
All the files for RepRap are kept in a [http://en.wikipedia.org/wiki/Subversion_(software) Subversion repository] on [http://en.wikipedia.org/wiki/SourceForge Sourceforge].<br />
<br />
You can use your web browser to [http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/ inspect and download individual files here].<br />
<br />
If you want to get the latest versions of files you can check them out of the repository. But take care - these files will be development versions that may have bugs.<br />
<br />
The simplest way to obtain the files is probably to use [http://en.wikipedia.org/wiki/Eclipse_(software) the Eclipse software development environment], which is used by all the RepRap hardware and software developers.<br />
<br />
Do the following:<br />
<br />
# Download and install [http://www.eclipse.org/ Eclipse from this link],<br />
# Download and install [http://subclipse.tigris.org/ Subclipse (that is, Subversion for Eclipse) from this link], and<br />
# Run Eclipse.<br />
<br />
In Eclipse go to the menu: '''<tt>Window -> Open Perspective -> Other...</tt>''' and you will get a menu containing (among other things) '''<tt>SVN Repository Exploring</tt>'''. Select that and click on OK. It should open a window called SVN Repository. Right mouse click in that window and select '''<tt>New -> Repository location</tt>'''. <br />
<br />
Copy and paste the RepRap repository URL: '''<tt>https://reprap.svn.sourceforge.net/svnroot/reprap/</tt>''' as the location.<br />
<br />
Open the repository (the little arrow at its left) and go down to '''<tt>trunk</tt>'''. Right-mouse-click on '''<tt>mendel</tt>''', and select '''<tt>Checkout...</tt>'''. This will give you all the mechanical and electronic design files, and the microcontroller firmware sources.<br />
<br />
Next go down to '''<tt>reprap</tt>''' and check out '''<tt>host</tt>''' (this is the Java software for the host computer).<br />
<br />
Note that you are downloading a lot of information (about 60M), so these will take quite a while on a slow connection.<br />
<br />
Now go back to the Java view in Eclipse (two little arrows: '''<tt>>></tt>''' top right) and you should have all the project's files.<br />
<br />
You can update any file or a whole folder full of files from the repository at any time by right-clicking on it and going to '''<tt>team -> update...</tt>'''<br />
<br />
To work with the Java source code you will need the system-dependent libraries that RepRap uses. Those are in the directory '''<tt>Reprap/lib/system-dependent/</tt>'''. You will need to copy (or create links to) the .so files (Linux) or the .dll files (Windows) in there to the place in the Java system where these are stored.<br />
<br />
==Alternatives==<br />
<br />
Alternative software packages are available to generate G Code and drive the Rep Rap. More information on these can be found on the [[Alternative Software]] page.<br />
<br />
<br />
[[Category:Программное обеспечение]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=%D0%A3%D1%81%D1%82%D0%B0%D0%BD%D0%BE%D0%B2%D0%BA%D0%B0_%D0%9F%D0%9E_RepRap_%D0%BD%D0%B0_%D0%BA%D0%BE%D0%BC%D0%BF%D1%8C%D1%8E%D1%82%D0%B5%D1%80%D0%B5&diff=14008Установка ПО RepRap на компьютере2010-03-26T17:28:51Z<p>Senyor: /* Prerequisites */</p>
<hr />
<div>{{Template:Mendel Documentation Header Ru}}<br />
{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}}<br />
<br />
{|-<br />
[[Image:material-select.png|600px|right]]<br />
|<br />
{{Alternative Toolchain Notice|software|install}}<br />
<br />
<br />
__TOC__<br />
|}<br />
<br style="clear:both;"/><br />
<br />
==Предустановка==<br />
<br />
ПО RepRap совместимо с 32-битными версиями Linux и Microsoft Windows. Мы работаем над добавлением совместимости с Mac и 64-битными версиями Linux и Windows.<br />
<br />
Вам также понадобится установить виртуальную машину Java. Если у Вас она еще не установлена, возьмите её здесь: <br />
<br />
* [http://java.com/ http://java.com/]<br />
<br />
Программное обеспечение для компьютера под Windows с установленной Java версии 6 все еще содежит ошибки, поэтому если у Вас возникнут проблемы с Java 6 и ПО, попробуйте деинсталлировать Java 6 и установить последнюю версию Java 5 отсюда:<br />
<br />
* [http://java.sun.com/products/archive/ http://java.sun.com/products/archive/]<br />
<br />
Вам также понадобится загрузить и установить среду разработки Arduino, чтобы собрать прошивку микроконтроллера для Вашей машины RepRap. Она доступна здесь:<br />
<br />
* [http://arduino.cc/ http://arduino.cc/]<br />
<br />
Вам понадобится загрузить и установить дополнения Sanguino к Arduino. Возьмите их здесь:<br />
<br />
* [http://sanguino.cc/ http://sanguino.cc/]<br />
<br />
И, напоследок в этом разделе, Вы можете ознакомиться с программным обеспечением, полезным для работы с RepRap. Список находится здесь:<br />
<br />
* [[Полезные пакеты ПО]]<br />
<br />
==Download==<br />
<br />
Download the RepRap distribution from Sourceforge:<br />
<br />
[http://sourceforge.net/projects/reprap/ http://sourceforge.net/projects/reprap/]<br />
<br />
There are a number of files and packages from the project available there, but the main download (which is about 65 MB) will have a name like reprap-nnnnnn-yyyymmdd.zip. This is the one file you want. It is the main Sourceforge download for RepRap; nnnnnn is the name of the current RepRap machine and yyyymmdd is the date of the release. <br />
<br />
==Linux Installation==<br />
<br />
You can install and use RepRap in your own file-space under Linux. <br />
<br />
===In your own space===<br />
<br />
Unzip the downloaded file:<br />
<br />
<pre><br />
$ unzip reprap-nnnnnn-yyyymmdd.zip<br />
</pre><br />
<br />
This will create a directory called reprap-nnnnnn-yyyymmdd (with the name of the current RepRap machine and the distribution date substituted, clearly). To run the RepRap software simply move to that directory and run the file named reprap:<br />
<br />
<pre><br />
$ cd reprap-nnnnnn-yyyymmdd<br />
$ ./reprap<br />
</pre><br />
<br />
===Installing for all users===<br />
<br />
If you want RepRap to be available system-wide to all users, you will need to log in as the superuser to install it.<br />
<br />
Assume you downloaded reprap-nnnnnn-yyyymmdd.zip into the directory /xxx/yyy. Move to the directory /usr/local, then unpack it:<br />
<br />
<pre><br />
# cd /usr/local<br />
# unzip /xxx/yyy/reprap-nnnnnn-yyyymmdd.zip<br />
</pre><br />
<br />
Then move to the /usr/local/bin directory and create a short shell script called reprap using your favourite text editor (gedit in the example).<br />
<br />
<pre><br />
# cd /usr/local/bin<br />
# gedit reprap<br />
</pre><br />
<br />
Copy and paste these three lines into the script, then save it:<br />
<br />
<pre><br />
#!/bin/sh<br />
cd /usr/local/reprap-nnnnnn-yyyymmdd<br />
./reprap<br />
</pre><br />
<br />
(Don't forget to replace the nnnnnn and the yyyymmdd with the right strings for your distribution file.)<br />
<br />
Finally, set execute permission on the file:<br />
<br />
<pre><br />
# chmod 755 reprap<br />
</pre><br />
<br />
Any user will now be able to run the software just by typing the command "reprap".<br />
<br />
There is a RepRap teardrop symbol in the file /usr/local/reprap-nnnnnn-yyyymmdd/reprap-icon.png which people can use if they add the program to their desktop or task-bar as a clickable executable. The program is /usr/local/bin/reprap .<br />
<br />
If you want to save space, you can now delete the distribution .zip file:<br />
<br />
<pre><br />
# rm /xxx/yyy/reprap-nnnnnn-yyyymmdd.zip<br />
</pre><br />
<br />
==Linux AMD64==<br />
<br />
The reprap software comes with rxtx and java3d binaries needed for 32bit arcitectures so getting the reprap software working on amd64 either means installing 32bit version of java or installing native 64bit versions of the libraries. For the latter option here is how you can set it up.<br />
<br />
For java3d its a simple these can simply be installed using<br />
sudo apt-get install libjava3d-jni<br />
For rxtx you can download binaries for the latest stable version [http://rxtx.qbang.org/pub/rxtx/rxtx-2.1-7-bins-r2.zip here] expand the zip using<br />
unzip Downloads/rxtx-2.1-7-bins-r2.zip<br />
copy the 64 bit binary to /usr/lib<br />
sudo cp rxtx-2.1-7-bins-r2/Linux/x86_64-unknown-linux-gnu/librxtxSerial.so /usr/lib<br />
Now all that has to be done is to soft link these libs to where the reprap software expects them to be<br />
cd reprap-mendel-20100105<br />
rm libj3dcore-ogl.so<br />
rm librxtxSerial.so<br />
ln -s /usr/lib/jni/libj3dcore-ogl.so<br />
ln -s /usr/lib/librxtxSerial.so<br />
<br />
[[User:GilesBathgate|GilesBathgate]] 10:50, 16 January 2010 (UTC)<br />
<br />
==Windows Installation==<br />
<br />
You will need administrator privileges to do this.<br />
<br />
Create a new folder:<br />
<br />
<pre><br />
C:\Program Files\Reprap<br />
</pre><br />
<br />
Unpack the ZIP file anywhere you like on your system. It will create a folder called reprap-nnnnnn-yyyymmdd where nnnnnn is the name of the current RepRap machine and yyyymmdd is the date of the release. Move all the files in that folder into C:\Program Files\Reprap. <br />
<br />
You can then delete the reprap-nnnnnn-yyyymmdd if you like, and the ZIP file.<br />
<br />
In C:\Program Files\Reprap there is a .BAT file called reprap.bat. Running that will launch the RepRap host software. You can copy that .BAT file to your desktop or elsewhere to give you a clickable executable.<br />
<br />
==Source Code==<br />
===Distribution Contents===<br />
<br />
Information on the files in the RepRap distribution are available at [[RepRap Distribution Files]].<br />
<br />
===Getting the latest sources===<br />
<br />
All the files for RepRap are kept in a [http://en.wikipedia.org/wiki/Subversion_(software) Subversion repository] on [http://en.wikipedia.org/wiki/SourceForge Sourceforge].<br />
<br />
You can use your web browser to [http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/ inspect and download individual files here].<br />
<br />
If you want to get the latest versions of files you can check them out of the repository. But take care - these files will be development versions that may have bugs.<br />
<br />
The simplest way to obtain the files is probably to use [http://en.wikipedia.org/wiki/Eclipse_(software) the Eclipse software development environment], which is used by all the RepRap hardware and software developers.<br />
<br />
Do the following:<br />
<br />
# Download and install [http://www.eclipse.org/ Eclipse from this link],<br />
# Download and install [http://subclipse.tigris.org/ Subclipse (that is, Subversion for Eclipse) from this link], and<br />
# Run Eclipse.<br />
<br />
In Eclipse go to the menu: '''<tt>Window -> Open Perspective -> Other...</tt>''' and you will get a menu containing (among other things) '''<tt>SVN Repository Exploring</tt>'''. Select that and click on OK. It should open a window called SVN Repository. Right mouse click in that window and select '''<tt>New -> Repository location</tt>'''. <br />
<br />
Copy and paste the RepRap repository URL: '''<tt>https://reprap.svn.sourceforge.net/svnroot/reprap/</tt>''' as the location.<br />
<br />
Open the repository (the little arrow at its left) and go down to '''<tt>trunk</tt>'''. Right-mouse-click on '''<tt>mendel</tt>''', and select '''<tt>Checkout...</tt>'''. This will give you all the mechanical and electronic design files, and the microcontroller firmware sources.<br />
<br />
Next go down to '''<tt>reprap</tt>''' and check out '''<tt>host</tt>''' (this is the Java software for the host computer).<br />
<br />
Note that you are downloading a lot of information (about 60M), so these will take quite a while on a slow connection.<br />
<br />
Now go back to the Java view in Eclipse (two little arrows: '''<tt>>></tt>''' top right) and you should have all the project's files.<br />
<br />
You can update any file or a whole folder full of files from the repository at any time by right-clicking on it and going to '''<tt>team -> update...</tt>'''<br />
<br />
To work with the Java source code you will need the system-dependent libraries that RepRap uses. Those are in the directory '''<tt>Reprap/lib/system-dependent/</tt>'''. You will need to copy (or create links to) the .so files (Linux) or the .dll files (Windows) in there to the place in the Java system where these are stored.<br />
<br />
==Alternatives==<br />
<br />
Alternative software packages are available to generate G Code and drive the Rep Rap. More information on these can be found on the [[Alternative Software]] page.<br />
<br />
<br />
[[Category:Программное обеспечение]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=%D0%9D%D0%B0%D1%81%D1%82%D1%80%D0%BE%D0%B9%D0%BA%D0%B8_%D0%9F%D0%9E&diff=13956Настройки ПО2010-03-24T19:54:13Z<p>Senyor: Created page with '{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}} …'</p>
<hr />
<div>{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}}<br />
<br />
To get your hardware working properly you may have to tweak your software's parameters. To do this, run the RepRap software and click the purple Preferences button.<br />
<br />
When you run the RepRap software it creates you a local copy of the distribution preferences file that you can edit, whilst preserving the original. In this way you can have your own versions of the many parameters for the machine. These will be preserved when you download new versions of the software. But you can move to the default versions at any time.<br />
<br />
This page lists the preferences, and describes what they mean and do. It is divided into two sections: The first contains the general preference values for the entire machine, and Extruder Preferences contains the values specific to an extruder (of which there may be several, of course).<br />
<br />
The values after each entry are the standard ones for [[RepRap Version II Mendel]].<br />
<br />
You will see that some parameters are described as "Legacy". These are mainly those needed for the PIC-microcontroller RepRap and not the Arduino/Sanguino-controlled one, or are otherwise no longer used.<br />
<br />
Except for really obvious cases, parameter names have their dimensions in brackets on the end of their names.<br />
<br />
When you download a new version of the software you will probably want to find out if any new preferences have been added, or old ones deleted. That is to say you will want to find the differences between your preferences file and the distribution one. If you turn debugging on (click the [[Mendel_User_Manual:_Host_Software#Preferences|preferences button]] in the host software and set Debug "true" without the quotes to do this) then the software will report any differences between the distribution file and yours when it runs.<br />
<br />
__TOC__<br />
<br />
=General Preferences=<br />
<br />
=== AxisCount=3 ===<br />
<br />
The number of Cartesian axes in the machine. String theory aside, we live in three dimensions... <br />
<br />
=== BackColourB(0..1)=0.9, BackColourG(0..1)=0.9, BackColourR(0..1)=0.9 ===<br />
<br />
The RGB values of the background in the graphics window. <br />
<br />
=== BackFactor=2.0 ===<br />
<br />
A viewcone parameter needed for Java 3D, q.v.<br />
<br />
=== BaudRate=19200 ===<br />
<br />
The communications speed between the host computer and the RepRap microcontroller. <br />
<br />
=== BoundFactor=3.0 ===<br />
<br />
A viewcone parameter needed for Java 3D, q.v. <br />
<br />
=== CommsDebug=false ===<br />
<br />
Setting this true will cause each message to and from the RepRap machine also to be written to System.out. <br />
<br />
=== Debug=false ===<br />
<br />
Setting this true will cause each action the host makes the RepRap do to be written to System.out. <br />
<br />
=== DisplaySimulation=false ===<br />
<br />
This is normally set and reset by the "Display Paths" button on the RepRap control window, and so should not be hand-edited. Setting this true will cause a new window to be opened in which each segment laid down by the RepRap machine is represented as a line, so you can see the build happening on the computer's screen as each slice is being processed.<br />
<br />
=== DumpX(mm)=130, DumpY(mm)=5 ===<br />
<br />
The position at which the extrude head can be run for a time to purge itself. See Extruder0_Purge below.<br />
<br />
=== FastSpeed(-1..255)=240 ===<br />
<br />
Legacy. The fastest rate that the PIC XY steppers can be stepped.<br />
<br />
=== FinishX(mm)=10, FinishY(mm)=190 ===<br />
<br />
The position to which the machine will move at the end of a build.<br />
<br />
=== FiveD=true ===<br />
<br />
This only has an effect on G-Code generation. When this is false, the software generates G-codes to control the X, Y, and Z movement of the machine and separate codes to control the extruders.<br />
<br />
When this is true, the software generates G-codes that treat the extrusion as just another dimension. That is to say, it generates code like this:<br />
<br />
<tt>G1 X23.9 Y39.0 Z0.2526 E66.5 F3000.0 ;print segment</tt><br />
<br />
<tt>G1 X23.9 Y39.7 Z0.2526 E67.2 F3000.0 ;print segment</tt><br />
<br />
So, for example, the second line is saying move 0.7mm in Y from where you last were and extrude 0.7mm of filament while doing so, all at 3000 mm/minute. <br />
<br />
=== FoundationLayers=-1 ===<br />
<br />
The number of layers of material to put down under the object being built before building proper starts. Set this to -1 to suppress the laying down of foundations. <br />
<br />
=== FrontFactor=0.001 ===<br />
<br />
A viewcone parameter needed for Java 3D, q.v. <br />
<br />
=== GCodeUseSerial=false ===<br />
<br />
This is normally controlled automatically, and shouldn't be changed by the user. Setting this true causes the code to send G-codes direct to the RepRap machine (as opposed to writing them to a file) from communications port Port (see below). <br />
<br />
=== IdleZAxis=true ===<br />
<br />
Legacy. Causes the PIC to turn off the current to the Z-axis stepper when there is no vertical movement. <br />
<br />
=== InterLayerCooling=true ===<br />
<br />
Setting this true causes RepRap to turn on the cooling fan between layers to freeze/set the build material being used. See Extruder0_CoolingPeriod(s) below. It also has the effect of causing the machine to re-zero itself in X and Y between each layer. This is a good idea, so - if you don't want cooling, still set this true but set the cooling period very short (e.g. 0.1 second).<br />
<br />
=== MachineColourB(0..1)=0.3, MachineColourG(0..1)=0.4, MachineColourR(0..1)=0.3 ===<br />
<br />
The colour of the RepRap build bed in the graphics window. <br />
<br />
=== MaxXYAcceleration(mm/mininute/minute)=1200000 ===<br />
<br />
This is the maximum rate at which the machine can accelerate horizontally (i.e. in X and Y). As G Codes are in mm/minute, this is in the rather eccentric unit of mm/minute<sup>2</sup>. If you want to run at constant speed, or you have RepRap firmware that does not support accelerations, setting this negative will turn off XY accelerations for the whole machine (regardless of the similar values for the extruders - see below).<br />
<br />
When this is positive, the software generates G-codes that treat the feedrate as just another dimension. That is to say, it generates code like this:<br />
<br />
<tt>G1 X23.9 Y39.0 Z0.2526 E66.5 F1500.0 ;print segment</tt><br />
<br />
<tt>G1 X23.9 Y39.7 Z0.2526 E67.2 F3000.0 ;print segment</tt><br />
<br />
So, for example, the second line is saying move 0.7mm in Y from where you last were, extrude 0.7mm of filament during the move, and accelerate from 1500.0 mm/minute to 3000.0 mm/minute while doing so. To make a movement at constant speed, simply set the feedrate first:<br />
<br />
<tt>G1 F1500.0 ;set feedrate</tt><br />
<br />
<tt>G1 X23.9 Y39.7 Z0.2526 E67.2;print segment</tt><br />
<br />
This would do exactly the same movement and extrusion, but at a constant feedrate of 1500 mm/minute. <br />
<br />
=== MaxZAcceleration(mm/mininute/minute)=3000 ===<br />
<br />
This is the maximum rate at which the machine can accelerate vertically (i.e. in Z). As G Codes are in mm/minute, this is in the rather eccentric unit of mm/minute<sup>2</sup>. If you want to run at constant speed, or you have RepRap firmware that does not support accelerations, setting this negative will turn off Z accelerations for the whole machine. <br />
<br />
=== MaximumFeedrateX(mm/minute)=3000 ===<br />
<br />
The fastest speed that the X axis can be driven at without stalling or missing steps. <br />
<br />
=== MaximumFeedrateY(mm/minute)=3000 ===<br />
<br />
The fastest speed that the Y axis can be driven at without stalling or missing steps. <br />
<br />
=== MaximumFeedrateZ(mm/minute)=50 ===<br />
<br />
The fastest speed that the Z axis can be driven at without stalling or missing steps. Note, if you're experimenting, that moving up against gravity is harder than moving down, which will lead to a slower value. Use that. <br />
<br />
=== MouseTranslationFactor=50 ===<br />
<br />
A scaling factor for mouse movements in 3D in the graphics window. <br />
<br />
=== MouseZoomFactor=50 ===<br />
<br />
A scaling factor for mouse movements in 3D in the graphics window. <br />
<br />
=== MovementSpeedZ(0..255)=240 ===<br />
<br />
Legacy. The speed to move the Z axis on the PIC controlled machine. <br />
<br />
=== NumberOfExtruders=3 ===<br />
<br />
How many extruders are in use. Note that you can use the same extruder more than once. That is to say you can copy all the parameters of Extruder0 (say), call them Extruder1, and edit them to get different behavior (leaving the address the same - see below). Then you can flip between the two when you load objects to build. <br />
<br />
=== PathOptimise=false ===<br />
<br />
This takes more time over computing the movement of the RepRap machine when generating GCode files so that when the movements are actually executed in the machine they run faster. In particular, it attempts to reduce in-air movements. If you just want to print a one-off of something, set this false. If you're going to print the same file lots of times, set it true.<br />
<br />
=== Port(name)=/dev/ttyUSB0 ===<br />
<br />
The port on the host computer that is connected to the RepRap machine. On Linux machines this will be something like /dev/ttyUSB0, on Windows it will be something like COM5.<br />
<br />
=== RadiusFactor=0.7 ===<br />
<br />
Another Java 3D parameter. This sets the size of the world that you're looking at. <br />
<br />
=== RememberWindowPosition=false ===<br />
<br />
When set true, forces the system to put the RepRap window back where it was and the same size after you've folded it away. <br />
<br />
=== RepRap_Machine=GCodeRepRap ===<br />
<br />
The type of RepRap machine attached to the host computer. This decides the encoding of the information sent from the host. Valid types are: GCodeRepRap, SNAPRepRap, and Simulator. <br />
<br />
=== SelectedColourB(0..1)=0.2, SelectedColourG(0..1)=0.2, SelectedColourR(0..1)=0.6 ===<br />
<br />
When you load an object to be printed onto the picture of the RepRap build area, then select it with the mouse so you can slide it about, this decides what colour it will change to to indicate that you have selected it. <br />
<br />
=== Shield=true ===<br />
<br />
When set true, this causes a wiper shield to be built alongside the parts being laid down. If the write head returns to the origin between layers, then this shield tends to remove any dribble from the nozzle before the nozzle starts laying down the part itself. Allow a blank space of 6mm in X and Y between the origin and the southwest corner of the object(s) being built for the shield to be constructed in.<br />
<br />
=== SlowXYFeedrate(mm/minute)=1500.0 ===<br />
<br />
When accelerating in X and Y, this decides what speed the machine can do as a standing start. That is to say, at this speed the steppers won't lose steps if they just start running. Thus it is also the speed at which the machine goes round a right-angled corner, for example (as that stops X and starts Y, or vice versa). <br />
<br />
=== SlowZFeedrate(mm/minute)=5.0 ===<br />
<br />
When accelerating in Z, this decides what speed the machine can do as a standing start. That is to say, at this speed the steppers won't lose steps if they just start running.<br />
<br />
=== Subtractive=false ===<br />
<br />
Set this true if you have a cutting head, rather than an extruder, in your RepRap. Experimental... <br />
<br />
=== UnselectedColourB(0..1)=0.3, UnselectedColourG(0..1)=0.3, UnselectedColourR(0..1)=0.3 ===<br />
<br />
The default colour of an object to be built when it's not selected. This is overridden by Extruder0_ColourB/G/R (see below). <br />
<br />
=== WorkingLocation=reprap-wv.stl ===<br />
<br />
The file containing the stl for the model of the RepRap build base that appears in the graphics window. <br />
<br />
=== WorkingOffsetX(mm)=-17.3, WorkingOffsetY(mm)=-24.85, WorkingOffsetZ(mm)=-2 ===<br />
<br />
The position of the bottom left hand corner of WorkingLocation (see above) relative to (0, 0, 0). <br />
<br />
=== WorkingX(mm)=300, WorkingY(mm)=300, WorkingZ(mm)=300 ===<br />
<br />
The lengths of movement in the three directions. There is a bug in the code that handles these, so they are set to a nominal 300mm each at the moment. <br />
<br />
=== WorldName=RepRap-World ===<br />
<br />
An internal label that is used as the root of the Java 3D graphics object tree. <br />
<br />
=== XAxisAddress=2 ===<br />
<br />
Legacy. The address of the X-axis stepper controller for the PIC. <br />
<br />
=== XAxisScale(steps/mm)=7.99735 ===<br />
<br />
Legacy. The number of X stepper-motor steps needed to move 1 mm for the PIC. A good way to set this is to get the machine to build a long thin brick 100 mm long and a few mm deep and high. Then measure the object with accurate vernier calipers (giving length L, say) and change this value accordingly: XAxisScale<sub>new</sub> = XAxisScale<sub>old</sub>.L/100. <br />
<br />
=== XAxisTorque(%)=100 ===<br />
<br />
Legacy. The power to sent to the X-stepper coils. This is now controlled by a potentiometer on the stepper controller board. <br />
<br />
=== XYReZeroInterval(mm)=-1 ===<br />
<br />
Repeatedly stop building and re-zero the X and Y axes against the opto endstops after this distance of movement. Set this negative to suppress this behaviour. See also InterLayerCooling above.<br />
<br />
=== YAxisAddress=3 ===<br />
<br />
Legacy. The address of the Y-axis stepper controller for the PIC. <br />
<br />
=== YAxisScale(steps/mm)=7.99735 ===<br />
<br />
Legacy. The number of Y stepper-motor steps needed to move 1 mm in the PIC. See XAxisScale above for how to set this. <br />
<br />
=== YAxisTorque(%)=100 ===<br />
<br />
Legacy. The power to sent to the Y-stepper coils. This is now controlled by a potentiometer on the stepper controller board. <br />
<br />
=== ZAxisAddress=4 ===<br />
<br />
Legacy. The address of the Z-axis stepper controller in the PIC. <br />
<br />
=== ZAxisScale(steps/mm)=320 ===<br />
<br />
Legacy. The number of Z stepper-motor steps needed to move 1 mm in the PIC. Look up the pitch of the threads in the corner of your RepRap machine (the standard ones, M8, have a pitch of 1.25 mm), then divide the number of steps your Z stepper takes for one revolution by that value. <br />
<br />
=== ZAxisTorque(%)=100 ===<br />
<br />
Legacy. The power to sent to the Z-stepper coils. This is now controlled by a potentiometer on the stepper controller board. <br />
<br />
<br />
<br />
<br />
<br />
<br />
= Extruder Preferences =<br />
<br />
=== Extruder0_Address=0 ===<br />
<br />
The address of the extruder. These addresses are used by the RepRap firmware to decide what physical device the host is talking to.<br />
<br />
=== Extruder0_AngleSpeedFactor(0..1)=0.5 ===<br />
<br />
Legacy. Go faster round angles/changes of direction in the path according to this: relative speed = 1 - 0.5*(1 + cos(angle))*AngleSpeedFactor. <br />
<br />
=== Extruder0_AngleSpeedLength(mm)=-1 ===<br />
<br />
Legacy. The distance either side of a change of direction to speed up for. Set this negative to suppress this behaviour. <br />
<br />
=== Extruder0_ArcCompensationFactor(0..)=8 ===<br />
<br />
When the extruder moves in an arc, too much material is laid down on the inside, and not enough on the outside. See [http://reprap.org/bin/view/Main/ArcCompensation this page] for an explanation of what this does. <br />
<br />
=== Extruder0_ArcShortSides(0..)=1 ===<br />
<br />
When the extruder moves in an arc, too much material is laid down on the inside, and not enough on the outside. See this page for an explanation of what this does. <br />
<br />
=== Extruder0_Beta(K)=550.0 ===<br />
<br />
Legacy. The beta value of the thermistor used to measure the temperature of the extruder in the PIC. For a non-PIC controllers set this to 550.0 regardless of what thermistor you actually use. <br />
<br />
=== Extruder0_Capacitor(F)=0.000003 ===<br />
<br />
Legacy. The capacitor value in the PIC controller used to time the resistance of the thermistor. For a non-PIC controller set this to 0.000003 regardless of what thermistor you actually use. <br />
<br />
=== Extruder0_ColourB(0..1)=0.6, Extruder0_ColourG(0..1)=0.3, Extruder0_ColourR(0..1)=0.3 ===<br />
<br />
The colour of objects made by the material in this extruder in the graphics window. <br />
<br />
=== Extruder0_CoolingPeriod(s)=0.1 ===<br />
<br />
The time to turn the cooling fan on between layers. Set this negative to suppress cooling between layers. See InterLayerCooling above.<br />
<br />
=== Extruder0_EvenHatchDirection(degrees)=45 ===<br />
<br />
The angle in degrees to use to infill even-numbered layers. <br />
<br />
=== Extruder0_ExtrudeRatio(0..)=1 ===<br />
<br />
If you are using the 4D firmware, this decides how much extrudate actually to lay down for a given movement. Thus if you set this to 0.7 and the head moves 100mm, then 70mm of extrudate will be deposited in that move. You can use this to control how fat or thin the extrudate trail is, though the machine should be set up so that this factor is 1.0. <br />
<br />
=== Extruder0_ExtrusionBroadWidth(mm)=2.0 ===<br />
<br />
The gap between the infill zig-zag pattern used to fill the interior of an object when coarse infill is being used. Set this negative to suppress coarse infill. <br />
<br />
=== Extruder0_ExtrusionDelayForLayer(ms)=600 ===<br />
<br />
For the first use of the extruder in a layer the time delay between turning on the extruder motor and starting to move the extruder to lay down material. See also ValveDelayForLayer (below). <br />
<br />
=== Extruder0_ExtrusionDelayForPolygon(ms)=500 ===<br />
<br />
For the second and all subsequent use of the extruder in a layer the time delay between turning on the extruder motor and starting to move the extruder to lay down material. See also ValveDelayForPolygon (below). <br />
<br />
=== Extruder0_ExtrusionFoundationWidth(mm)=2 ===<br />
<br />
The gap between the infill zig-zag pattern used to fill the interior of the foundations (if any). <br />
<br />
=== Extruder0_ExtrusionHeight(mm)=0.3 ===<br />
<br />
The depth of each layer. This value should be the same for all extruders in the machine at any one time. <br />
<br />
=== Extruder0_ExtrusionInfillWidth(mm)=0.6 ===<br />
<br />
The gap between the infill zig-zag pattern used to fill the interior of an object when fine infill is being used. <br />
<br />
=== Extruder0_ExtrusionLastFoundationWidth(mm)=2 ===<br />
<br />
The gap between the infill zig-zag pattern used to fill the interior of the last layer of the foundations (if any). <br />
<br />
=== Extruder0_ExtrusionOverRun(mm)=-1 ===<br />
<br />
The distance before the end of a sequence of infill or outline depositions to turn off the extruder motor. See also ValveOverRun (below). Set this negative to keep running to the end. <br />
<br />
=== Extruder0_ExtrusionPWM(0..1)=-1 ===<br />
<br />
This controls the current to the extruder stepper motor, and hence its power. It sets the PWM ratio for the drive electronics. A value of 1 gives maximum current (be very careful not to burn out motors and control electronics with high values). A value of 0 disables the motor. If you set this to -1 (the default) then the motor uses the extruder's on-board potentiometer to set its current. Once again, be careful of turning this up too high (clockwise).<br />
<br />
=== Extruder0_ExtrusionSize(mm)=0.7 ===<br />
<br />
The width of the filament laid down by the extruder. <br />
<br />
=== Extruder0_ExtrusionSpeed(mm/minute)=3000 ===<br />
<br />
This sets the rate at which the extrudate exits the nozzle in millimeters per minute when the extruder is running in thin air (i.e. not building, or running the delay at the start of a layer or polygon - see above). <br />
<br />
Legacy. On PIC-based extruders it sets the PWM signal to send the extruder motor, as a fraction of 255. See also Extruder0_t0 (below). <br />
<br />
In either case, if there is no motor in use, set this negative. <br />
<br />
Legacy. On earlier extruders it sets the PWM signal to send the extruder motor, as a fraction of 255. See also Extruder0_t0 (below). <br />
<br />
=== Extruder0_ExtrusionTemp(C)=190 ===<br />
<br />
The temperature to run the extruder at. 190<sup>o</sup>C is a good temperature for polylactic acid. For ABS use 240<sup>o</sup>C.<br />
<br />
=== Extruder0_FastEFeedrate(mm/minute)=8000.0 ===<br />
<br />
When the extruder reverses to retracts its filament (and moves forward from a retraction) there is almost no resistance to the filament's movement, so it can move fast. This is the speed to use for these. See also Extruder0_Reverse(ms).<br />
<br />
=== Extruder0_FastXYFeedrate(mm/minute)=3000.0 ===<br />
<br />
The fastest that this extruder can plot. This is the speed that the system will accelerate writing up to when accelerations are enabled. The system takes the minimum of this vale and the equivalent value for the machine overall when extruding. <br />
<br />
=== Extruder0_InFillMaterialType(name)=PLA-infill ===<br />
<br />
The name of the extruder material to use for infill. This is commonly the same actual extruder used for the outline shell, but this separate logical extruder allows you to set different parameters for infill and outline. Or you can outline in one material and infill with another, of course. <br />
<br />
=== Extruder0_IncrementedStart=false ===<br />
<br />
Legacy. When plotting a layer, start each polygon one edge further round on successive layers. This stops all the start points lining up for a vertically-sided object and can improve quality. See also RandomStart below. This parameter is ignored from software revision 3201, when the starting of outline from within solid was implemented.<br />
<br />
=== Extruder0_InfillOverlap(mm)=0.2 ===<br />
<br />
The amount to make the infill and outline overlap. This causes the two to weld together. You can set it negative and make a gap instead. <br />
<br />
=== Extruder0_InfillSpeed(0..1)=1 ===<br />
<br />
The fraction of the fastest extruder XY speed to do the infill at. See also FastXYFeedrate (above). <br />
<br />
=== Extruder0_LowerFineLayers(0...)=2 ===<br />
<br />
Give this many layers at the bottom of the object fine infill. <br />
<br />
=== Extruder0_MaterialType(name)=PLA ===<br />
<br />
The name of the material in use. <br />
<br />
=== Extruder0_MaxAcceleration(mm/minute/minute)=1200000.0 ===<br />
<br />
The fastest acceleration that this extruder can handle. Set this negative if the extruder must write at a constant speed. The system takes the minimum of this vale and the equivalent value for the machine overall when extruding. <br />
<br />
=== Extruder0_MaxSpeed(0..255)=255 ===<br />
<br />
Legacy. The maximum value of Extruder0_ExtrusionSpeed (see above) for the PIC. If you have an extruder motor with a rated voltage below 12v this allows you to protect it. For 12v motors, just set this to 255. <br />
<br />
=== Extruder0_MinimumZClearance(mm)=-1 ===<br />
<br />
When moving over the build bed while not laying down material, don't move below this height. If you set this negative, then the head stays at the same level all the time for each layer. That's to say it doesn't lift for fast no-print moves. For some materials (ABS and PLA, for example) this can give a quicker and better result. For others (polycaprolactone, for example) it makes a mess... <br />
<br />
=== Extruder0_NozzleClearTime(s)=10 ===<br />
<br />
Legacy. When nozzle wiping, run the extruder for this time between layers to get it working again. No longer used. See "Shield" above. <br />
<br />
=== Extruder0_NozzleWaitTime(s)=0 ===<br />
<br />
Legacy. After clearing, wait for this time before doing anything else. No longer used. See "Shield" above. <br />
<br />
=== Extruder0_NozzleWipeDatumX(mm)=22.4 ===<br />
<br />
Legacy. The X coordinate to move to at the start of the nozzle-wipe sequence. No longer used. See "Shield" above. <br />
<br />
=== Extruder0_NozzleWipeDatumY(mm)=4 ===<br />
<br />
Legacy. The Y coordinate to move to at the start of the nozzle-wipe sequence. No longer used. See "Shield" above. <br />
<br />
=== Extruder0_NozzleWipeEnabled=false ===<br />
<br />
Legacy. Set false to suppress nozzle wiping. No longer used. See "Shield" above. <br />
<br />
=== Extruder0_NozzleWipeFreq=1 ===<br />
<br />
Legacy. How many times to wipe the nozzle. No longer used. See "Shield" above. <br />
<br />
=== Extruder0_NozzleWipeStrokeX(mm)=0 ===<br />
<br />
Legacy. How far to move in X to wipe the nozzle. No longer used. See "Shield" above. <br />
<br />
=== Extruder0_NozzleWipeStrokeY(mm)=10 ===<br />
<br />
Legacy. How far to move in Y to wipe the nozzle. No longer used. See "Shield" above. <br />
<br />
=== Extruder0_NumberOfShells(0..N)=1 ===<br />
<br />
Normally (when this is 1) RepRap puts one outline round each layer before infilling it. You can create multiple outlines (or none) by changing this value.<br />
<br />
=== Extruder0_OddHatchDirection(degrees)=-45 ===<br />
<br />
The angle in degrees to use to infill odd-numbered layers. <br />
<br />
=== Extruder0_OffsetX(mm)=0, Extruder0_OffsetY(mm)=0, Extruder0_OffsetZ(mm)=0 ===<br />
<br />
The offset of the extruder from (0, 0, 0) when the extruder is parked in X and Y. This is used to get multiple extruders in registration. <br />
<br />
=== Extruder0_OutlineSpeed(0..1)=0.9 ===<br />
<br />
The fraction of the fastest extruder XY speed to do the outline at. See also FastXYFeedrate (above). <br />
<br />
=== Extruder0_PauseBetweenSegments=false ===<br />
<br />
If true, wait for the user to mouse-click between each straight line segment being laid down. Very much for debugging. <br />
<br />
=== Extruder0_Purge(ms)=10000 ===<br />
<br />
The time to run the extruder to purge it. This happens at the dump location (see above).<br />
<br />
=== Extruder0_RandomStart=false ===<br />
<br />
Legacy. When plotting a layer, start each polygon at a random vertex on successive layers. This stops all the start points lining up for a vertically-sided object and can improve quality. See also IncrementedStart above. This parameter is ignored from software revision 3201, when the starting of outline from within solid was implemented.<br />
<br />
=== Extruder0_Reverse(ms)=400 ===<br />
<br />
The time to reverse the extruder motor when it is turned off, drawing the extrudate back into it and reducing dribble. <br />
<br />
=== Extruder0_Rz(ohms)=4837 ===<br />
<br />
Legacy. The resistance of the thermistor used to measure the temperature of the extruder at 0oC for the PIC. For a non-PIC controller set this to 4837 regardless of what thermistor you actually use. <br />
<br />
=== Extruder0_SeparationFraction(0..1)=0.8 ===<br />
<br />
When building foundations, make the level of the last foundation layer this fraction of a layer thickness above the previous one. This leaves a slightly bigger gap under the part being built, making it easier to separate the two. <br />
<br />
=== Extruder0_SeparationSpeed(mm/minute)=3000 ===<br />
<br />
The rate to extrude from the nozzle to make a layer that will more easily separate from the one below. Typically this is slower than the ordinary extrude speed, giving a thinner filament. <br />
<br />
=== Extruder0_ShortLength(mm)=-1 ===<br />
<br />
Legacy. For line segments this long or shorter speed up according to ShortSpeed (below). Set negative to suppress this behaviour. <br />
<br />
=== Extruder0_ShortSpeed(0..1)=1 ===<br />
<br />
Legacy. For line segments under ShortLength (above) lay down at this fraction of the fastest extruder XY speed. <br />
<br />
=== Extruder0_SlowXYFeedrate(mm/minute)=1500.0 ===<br />
<br />
The speed that the machine can do a standing start from when using this extruder. That is, turning on the X and/or Y steppers at this speed will not lose steps. <br />
<br />
=== Extruder0_SupportMaterialType(name)=PLA-support ===<br />
<br />
Not yet supported (though the code's in there commented out awaiting debugging...)<br />
<br />
The name of the material to use to support overhangs made from this material. You can set this the same as the material itself, then it will use the material to support itself. But - even if you want this - you will probably want different parameters (such as infill width) for the support build. To do this just copy all the material extruder's parameters, changing the extruder number and material name. You will then have two logical extruders driving the same physical extruder and can set their parameters as differently as you like.<br />
<br />
If you don't want support material to be used at all under overhangs for this material, set Extruder0_SupportMaterialType(name)=null. <br />
<br />
=== Extruder0_UpperFineLayers(0...)=2 ===<br />
<br />
Give this many layers at the top of the object fine infill. <br />
<br />
=== Extruder0_ValveDelayForLayer(ms)=200 ===<br />
<br />
For extruders with valves. For the first use of the extruder in a layer the time delay between opening the extruder valve and starting to move the extruder to lay down material. See also ExtrusionDelayForLayer (above). <br />
<br />
=== Extruder0_ValveDelayForPolygon(ms)=200 ===<br />
<br />
For the second and all subsequent use of the extruder in a layer the time delay between opening the extruder valve and starting to move the extruder to lay down material. See also ExtrusionDelayForPolygon (above). <br />
<br />
=== Extruder0_ValveOverRun(mm)=-1 ===<br />
<br />
The distance before the end of a sequence of infill or outline depositions to close the extruder valve. See also ExtrusionOverRun (above). Set this negative to run to the end. <br />
<br />
=== Extruder0_ValvePulseTime(ms)=-500 ===<br />
<br />
The time to pulse the valve to open or close it. Set this negative if no valve is in use. <br />
<br />
=== Extruder0_hb(C)=20 ===<br />
<br />
Legacy. The base temperature for PIC extruder heater power settings. This is usually room temperature. This is not used in the Arduino. <br />
<br />
=== Extruder0_hm(C/pwr)=0.86 ===<br />
<br />
Legacy. The equilibrium temperature of the extruder for one PWM increment (out of 255) driving the heater. This is not used in the Arduino. <br />
<br />
=== Extruder0_t0(0..255)=0 ===<br />
<br />
Legacy. The PWM value below which the extruder motor will not turn. See ExtrusionSpeed (above).<br />
<br />
<br />
[[Category:Software]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D1%8D%D0%BA%D1%81%D0%BF%D0%BB%D1%83%D0%B0%D1%82%D0%B0%D1%86%D0%B8%D0%B8&diff=13955RepRap II "Мендель" Инструкция по эксплуатации2010-03-24T19:53:45Z<p>Senyor: /* Форматы Файлов */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
== Общее ==<br />
* [[Сборка/Настройка/С чего начать|Включение RepRap]]<br />
<br />
== Механика ==<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Экструдер|Инструкция по экструдеру]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Координатный робот|Инструкция по координатному роботу]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Электроника|Инструкция по электронике]]<br />
<br />
==ПО и прошивка==<br />
{{notice|Расположенные ниже ссылки на страницы, возможно, содержат дубликаты тем и метериалов. Мы будем благодарны Вам за их корретировку.}}<br />
* [[Сборка/Способы_Настройки|Настройка Вашего RepRap]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Прошивка микроконтроллера|Инструкция по прошивке микроконтроллера]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Программное обеспечение|Как печатать изделия]]<br />
* [[Инструкция по эксплуатации: Программное обеспечение|Инструкция по программному обеспечению]]<br />
<br />
=== Форматы Файлов ===<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": RepRapG-Код|G-Код RepRap]] - Данный раздел описывает все G-коды, используемые для коммуникации компьютера с контроллером RepRap.<br />
* [[Настройки ПО|Описание файла настроек ПО]]<br />
* [http://reprap.org/bin/view/Main/MultipleMaterialsFiles Формат файла RFO (на англ.)] - Сохранение и загрузка множества объектов в сборочную базу RepRap.<br />
<br />
Задает все пераметры, сохранённые в ПО на компьютере для генерации G-кода, отправляемого на RepRap.<br />
<br />
[[Category:Инструкция по эксплуатации RepRap II "Мендель"]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D1%8D%D0%BA%D1%81%D0%BF%D0%BB%D1%83%D0%B0%D1%82%D0%B0%D1%86%D0%B8%D0%B8&diff=13954RepRap II "Мендель" Инструкция по эксплуатации2010-03-24T19:52:51Z<p>Senyor: /* Форматы Файлов */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
== Общее ==<br />
* [[Сборка/Настройка/С чего начать|Включение RepRap]]<br />
<br />
== Механика ==<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Экструдер|Инструкция по экструдеру]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Координатный робот|Инструкция по координатному роботу]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Электроника|Инструкция по электронике]]<br />
<br />
==ПО и прошивка==<br />
{{notice|Расположенные ниже ссылки на страницы, возможно, содержат дубликаты тем и метериалов. Мы будем благодарны Вам за их корретировку.}}<br />
* [[Сборка/Способы_Настройки|Настройка Вашего RepRap]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Прошивка микроконтроллера|Инструкция по прошивке микроконтроллера]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Программное обеспечение|Как печатать изделия]]<br />
* [[Инструкция по эксплуатации: Программное обеспечение|Инструкция по программному обеспечению]]<br />
<br />
=== Форматы Файлов ===<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": RepRapG-Код|G-Код RepRap]] - Данный раздел описывает все G-коды, используемые для коммуникации компьютера с контроллером RepRap.<br />
* [[Java ПО настройки|Описание файла настроек ПО]]<br />
* [http://reprap.org/bin/view/Main/MultipleMaterialsFiles Формат файла RFO (на англ.)] - Сохранение и загрузка множества объектов в сборочную базу RepRap.<br />
<br />
Задает все пераметры, сохранённые в ПО на компьютере для генерации G-кода, отправляемого на RepRap.<br />
<br />
[[Category:Инструкция по эксплуатации RepRap II "Мендель"]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D1%8D%D0%BA%D1%81%D0%BF%D0%BB%D1%83%D0%B0%D1%82%D0%B0%D1%86%D0%B8%D0%B8_RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22:_RepRapG-%D0%9A%D0%BE%D0%B4&diff=13953Инструкция по эксплуатации RepRap II "Мендель": RepRapG-Код2010-03-24T19:52:24Z<p>Senyor: Created page with '{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}} …'</p>
<hr />
<div>{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}}<br />
<br />
== Introduction ==<br />
<br />
This page describes the G Codes that the RepRap firmware uses and how they work.<br />
<br />
The list of what can be done is extensible. But check this page first, and add your extension here first '''before''' you implement it.<br />
<br />
A typical piece of GCode as sent to a RepRap machine might look like this:<br />
<br />
<pre><br />
N3 T0 *86<br />
N4 G92 E0 *102<br />
N5 G28 *13<br />
N6 G1 F1500.0 *117<br />
N7 G1 X2.0 Y2.0 F3000.0 *71<br />
N8 G1 X3.0 Y3.0 *39<br />
</pre><br />
<br />
The meaning of all those symbols and numbers (and more) is explained below.<br />
<br />
== RepRap G Code Fields ==<br />
<br />
This section explains the letter-preceded fields. The numbers in the fields are represented by nnn. Numbers can be integers, or can contain a decimal point, depending on context. For example an X coordinate can be integer (X175) or fractional (X17.62), whereas trying to select extruder number 2.76 would make no sense.<br />
<br />
{| class="wikitable"<br />
|-<br />
! Letter<br />
! Meaning<br />
|-<br />
| Gnnn<br />
| Standard GCode command, such as move to a point<br />
|-<br />
| Mnnn<br />
| RepRap-defined command, such as turn on a cooling fan<br />
|-<br />
| Tnnn<br />
| Select tool nnn. In RepRap, tools are extruders<br />
|-<br />
| Snnn<br />
| Command parameter, such as the voltage to send to a motor<br />
|-<br />
| Pnnn<br />
| Command parameter, such as a time in milliseconds<br />
|-<br />
| Xnnn<br />
| An X coordinate, usually to move to<br />
|-<br />
| Ynnn<br />
| A Y coordinate, usually to move to<br />
|-<br />
| Znnn<br />
| A Z coordinate, usually to move to<br />
|-<br />
| Innn<br />
| Parameter - not currently used<br />
|-<br />
| Jnnn<br />
| Parameter - not currently used<br />
|-<br />
| Fnnn<br />
| Feedrate in mm per minute.<br />
|-<br />
| Rnnn<br />
| Parameter - not currently used<br />
|-<br />
| Qnnn<br />
| Parameter - not currently used<br />
|-<br />
| Ennn<br />
| Length of extrudate in mm. This is exactly like X, Y and Z, but for the length of filament to extrude.<br />
|-<br />
| Nnnn<br />
| Line number. Used to request repeat transmission in the case of communications errors.<br />
|-<br />
| *nnn<br />
| Checksum. Used to check for communications errors.<br />
|-<br />
|}<br />
<br />
== Individual commands ==<br />
<br />
=== Checking ===<br />
<br />
==== N and * ====<br />
<br />
Example: N123 [...G Code in here...] *71<br />
<br />
These are the line number and the checksum. The RepRap firmware checks the checksum against a locally-computed value and, if they differ, requests a repeat transmission of the line of the given number.<br />
<br />
You can leave both of these out - RepRap will still work, but it won't do checking. You have to have both or neither though.<br />
<br />
The checksum, cs, for a GCode, cmd, (including its line number) is computed as follows:<br />
<br />
<pre><br />
int cs = 0;<br />
for(int i = 0; i < cmd.length(); i++)<br />
cs = cs ^ cmd.charAt(i);<br />
cs &= 0xff; // Defensive programming...<br />
</pre><br />
<br />
and the value is appended as a decimal integer to the command after the * character.<br />
<br />
The RepRap firmware expects line numbers to increase by 1 each line, and if that doesn't happen it is flagged as an error. But you can reset the count using M110 (see below).<br />
<br />
=== Buffered G Commands ===<br />
<br />
The RepRap firmware stores these commands in a ring buffer internally for execution. This means that there is no (appreciable) delay while a command is acknowledged and the next transmitted. In turn, this means that sequences of line segments can be plotted without a dwell between one and the next. As soon as one of these buffered commands is received it is acknowledged and stored locally. If the local buffer is full, then the acknowledgment is delayed until space for storage in the buffer is available. This is how flow control is achieved.<br />
<br />
==== G0 ====<br />
<br />
Example: G0 X12<br />
<br />
Rapid move. In this case move rapidly to X = 12 mm. In fact, the RepRap firmware uses exactly the same code for rapid as it uses for controlled moves (see G1 below), as - for the RepRap machine - this is just as efficient as not doing so. (The distinction comes from some old machine tools that used to move faster if the axes were not driven in a straight line. For them G0 allowed any movement in space to get to the destination as fast as possible.)<br />
<br />
==== G1 ====<br />
<br />
Example: G1 X90.6 Y13.8 E22.4<br />
<br />
Controlled move. Go in a straight line from the current (X, Y) point to the point (90.6, 13.8), extruding material as the move happens from the current extruded length to a length of 22.4 mm.<br />
<br />
RepRap does subtle things with feedrates. Thus:<br />
<br />
<pre><br />
G1 F1500<br />
G1 X90.6 Y13.8 E22.4<br />
</pre> <br />
<br />
Will set a feedrate of 1500 mm/minute, then do the move described above at that feedrate. But<br />
<br />
<pre><br />
G1 F1500<br />
G1 X90.6 Y13.8 E22.4 F3000<br />
</pre><br />
<br />
Will set a feedrate of 1500 mm/minute, then do the move described above accelerating to a feedrate of 3000 mm/minute as it does so. The extrusion will accelerate along with the X, Y movement so everything stays synchronized.<br />
<br />
RepRap thus treats feedrate as simply another variable (like X, Y, Z, and E) to be linearly interpolated. This gives complete control over accelerations and decelerations in a way that ensures that everything moves together and the right volume of material is extruded at all points.<br />
<br />
The first example shows how to get a constant-speed movement. The second how to accelerate or decelerate. Thus<br />
<br />
<pre><br />
G1 F1500<br />
G1 X90.6 Y13.8 E22.4 F3000<br />
G1 X80 Y20 E36 F1500<br />
</pre><br />
<br />
Will do the first movement accelerating as before, and the second decelerating from 3000 mm/minute back to 1500 mm/minute.<br />
<br />
To reverse the extruder by a given amount (for example to reduce its internal pressure while it does an in-air movement so that it doesn't dribble) simply use G1 to send an E value that is less than the currently extruded length.<br />
<br />
==== G28 ====<br />
<br />
Example: G28<br />
<br />
Move to the origin. This causes the RepRap machine to move back to its X, Y and Z zero endstops. It does so accelerating, so as to get there fast. But when it arrives it backs off by 1 mm in each direction slowly, then moves back slowly to the stop. This ensures more accurate positioning. <br />
<br />
If you add coordinates, then just the axes with coordinates specified will be zeroed. Thus <br />
<br />
G28 X0 Y72.3<br />
<br />
will zero the X and Y axes, but not Z. The actual coordinate values are ignored.<br />
<br />
=== Unbuffered G commands ===<br />
<br />
The following commands are not buffered. When one is received it is stored, but it is not acknowledged to the host until the buffer is exhausted and then the command has been executed. Thus the host will pause at one of these commands until it has been done. Short pauses between these commands and any that might follow them do not affect the performance of the machine.<br />
<br />
==== G4 ====<br />
<br />
Example: G4 P200<br />
<br />
Dwell, or delay. In this case sit still doing nothing for 200 milliseconds. During delays the state of the machine (for example the temperatures of its extruders) will still be preserved and controlled.<br />
<br />
==== G20 ====<br />
<br />
Example: G20<br />
<br />
Units from now on are in inches.<br />
<br />
==== G21 ====<br />
<br />
Example: G21<br />
<br />
Units from now on are in millimeters. (This is the RepRap default.)<br />
<br />
==== G90 ====<br />
<br />
Example: G90<br />
<br />
All coordinates from now on are absolute relative to the origin of the machine. (This is the RepRap default.)<br />
<br />
==== G91 ====<br />
<br />
Example: G91<br />
<br />
All coordinates from now on are relative to the last position.<br />
<br />
<br />
==== G92 ====<br />
<br />
Example: G92 X10 E90<br />
<br />
Set the current position to the values specified. This would set the machine's X coordinate to 10, and the extrude coordinate to 90.<br />
<br />
=== Unbuffered M and T commands ===<br />
<br />
==== M104 ====<br />
<br />
Example: M104 S190<br />
<br />
Set the temperature of the current extruder to 190<sup>o</sup>C and return control to the host immediately (''i.e.'' before that temperature has been reached by the extruder). See also M109.<br />
<br />
==== M105 ====<br />
<br />
Example: M105<br />
<br />
Request the temperature of the current extruder in degrees Celsius. The temperature is returned to the host computer.<br />
<br />
==== M106 ====<br />
<br />
Example: M106<br />
<br />
Turn on the cooling fan (if any).<br />
<br />
==== M107 ====<br />
<br />
Example: M107<br />
<br />
Turn off the cooling fan (if any).<br />
<br />
==== M109 ====<br />
<br />
Example: M109 S190<br />
<br />
Set the temperature of the current extruder to 190<sup>o</sup>C and wait for it to reach that value before sending an acknowledgment to the host. In fact the RepRap firmware waits a while after the temperature has been reached for the extruder to stabilise - typically about 40 seconds. This can be changed by a parameter in the firmware configuration file when the firmware is compiled. See also M104.<br />
<br />
==== M110 ====<br />
<br />
Example: N123 M110<br />
<br />
Set the current line number to 123. Thus the expected next line after this command will be 124.<br />
<br />
==== M111 ====<br />
<br />
Example: M111 S6<br />
<br />
Set the level of debugging information transmitted back to the host to level 6. The level is the OR of three bits:<br />
<br />
<Pre><br />
#define DEBUG_ECHO (1<<0)<br />
#define DEBUG_INFO (1<<1)<br />
#define DEBUG_ERRORS (1<<2)<br />
</pre><br />
<br />
Thus 6 means send information and errors, but don't echo commands. (This is the RepRap default.)<br />
<br />
==== M112 ====<br />
<br />
Example: M112<br />
<br />
Reserved for Immediate Stop. Not yet implemented.<br />
<br />
<br />
==== M113 ====<br />
<br />
Example: M113<br />
<br />
Set the PWM for the currently-selected extruder. On its own this command <br />
sets RepRap to use the on-board potentiometer on the extruder controller board to set the PWM for the currently-selected extruder's stepper power. With an S field:<br />
<br />
M113 S0.7<br />
<br />
it causes the PWM to be set to the S value (70% in this instance). M113 S0 turns the extruder off, until an M113 command other than M113 S0 is sent.<br />
<br />
==== M114 ====<br />
<br />
Example: M114<br />
<br />
This causes the RepRap machine to report its current X, Y, Z and E coordinates to the host.<br />
<br />
==== M126 ====<br />
<br />
Example: M126 P500<br />
<br />
Open the extruder's valve (if it has one) and wait 500 milliseconds for it to do so.<br />
<br />
==== M127 ====<br />
<br />
Example: M127 P400<br />
<br />
Close the extruder's valve (if it has one) and wait 400 milliseconds for it to do so.<br />
<br />
==== T ====<br />
<br />
Example: T1<br />
<br />
Select extruder number 1 to build with. Extruder numbering starts at 0.</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D1%8D%D0%BA%D1%81%D0%BF%D0%BB%D1%83%D0%B0%D1%82%D0%B0%D1%86%D0%B8%D0%B8&diff=13952RepRap II "Мендель" Инструкция по эксплуатации2010-03-24T19:51:56Z<p>Senyor: /* Форматы Файлов */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
== Общее ==<br />
* [[Сборка/Настройка/С чего начать|Включение RepRap]]<br />
<br />
== Механика ==<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Экструдер|Инструкция по экструдеру]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Координатный робот|Инструкция по координатному роботу]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Электроника|Инструкция по электронике]]<br />
<br />
==ПО и прошивка==<br />
{{notice|Расположенные ниже ссылки на страницы, возможно, содержат дубликаты тем и метериалов. Мы будем благодарны Вам за их корретировку.}}<br />
* [[Сборка/Способы_Настройки|Настройка Вашего RepRap]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Прошивка микроконтроллера|Инструкция по прошивке микроконтроллера]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Программное обеспечение|Как печатать изделия]]<br />
* [[Инструкция по эксплуатации: Программное обеспечение|Инструкция по программному обеспечению]]<br />
<br />
=== Форматы Файлов ===<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": RepRapG-Код|G-Код RepRap]] - Данный раздел описывает все G-коды, используемые для коммуникации компьютера с контроллером RepRap.<br />
* [[Java ПО настройки|Описание Файла настроек ПО]]<br />
* [http://reprap.org/bin/view/Main/MultipleMaterialsFiles Формат файла RFO (на англ.)] - Сохранение и загрузка множества объектов в сборочную базу RepRap.<br />
<br />
Задает все пераметры, сохранённые в ПО на компьютере для генерации G-кода, отправляемого на RepRap.<br />
<br />
[[Category:Инструкция по эксплуатации RepRap II "Мендель"]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D1%8D%D0%BA%D1%81%D0%BF%D0%BB%D1%83%D0%B0%D1%82%D0%B0%D1%86%D0%B8%D0%B8:_%D0%9F%D1%80%D0%BE%D0%B3%D1%80%D0%B0%D0%BC%D0%BC%D0%BD%D0%BE%D0%B5_%D0%BE%D0%B1%D0%B5%D1%81%D0%BF%D0%B5%D1%87%D0%B5%D0%BD%D0%B8%D0%B5&diff=13951Инструкция по эксплуатации: Программное обеспечение2010-03-24T19:51:18Z<p>Senyor: Created page with '{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}} …'</p>
<hr />
<div>{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}}<br />
<br />
{{TWikiPort|DriverSoftware}}<br />
<br />
<br />
{{Alternative Toolchain Notice|software|use}}<br />
<br />
<br />
__TOC__<br />
<br />
==Troubleshooting==<br />
*If you are having trouble with any of the axis' make sure you check your Cartesian-bot for mechanical problems (friction, alignment) and check to see if your [[Electronics_Hints|Electronics]] are working properly.<br />
<br />
==Setting Host Port Preferences when using Windows==<br />
<br />
To find out which COM port the USB or serial port is using, go to the Windows Control Panel (Start -> Control Panel) and then the Hardware Manager (System -> Hardware -> Device Manager). Scroll down to Ports (COM & LPT) and expand the tree by clicking on the plus sign. There you should see something to the effect of a Communications Port (COM1) and USB Device (COM5). It may not be COM5 on your machine it all depends on how Windows addressed it when you installed the drivers<br />
<br />
Then use search to find the reprap.properties file. Right click and edit. Search for Port(name) and change to match your com number. This must be in caps without spaces. Mine for example is Port(name)=COM4.<br />
<br />
Save the changes.<br />
<br />
==Setting Host Port Preferences when using Ubuntu Linux==<br />
<br />
Copied from [[http://forums.reprap.org/read.php?12,4546 RepRap fourm]]<br />
<br />
The procedure for using the USB adapter from the BOM wasn't in the wiki - nor was it immediately obvious, so, here goes.<br />
<br />
<br />
If you are using the usb -> RS232 adapter, the serial drivers may need to be installed for the device to work properly. After plugging in the device, first check the hardware messages to see the device was detected:<br />
<br />
dmesg<br />
<br />
Torward the end of the messages, you should see this:<br />
<br />
usb 1-1: new full speed USB device using uhci_and address 2<br />
usb 1-1: configuration #1 chosen from 1 choice<br />
<br />
Now, we need to figure out the device vendor number and product number to tell the usbserial driver. For this we can use lsusb. The easiest way to find the information is to first unplug the device, then run lsusb:<br />
<br />
lsusb<br />
<br />
<br />
You will see a summary list of your USB devices on the system, I only have one:<br />
<br />
Bus 001 Device 001: ID 0000:0000<br />
<br />
Now, plug the device back in, and run lsusb again:<br />
<br />
lsusb<br />
<br />
Which returns the summary list again, but now showing the new USB device:<br />
<br />
Bus 001 Device 002: ID 4348:5523<br />
Bus 001 Device 001: ID 0000:0000<br />
<br />
<br />
Now, we can load up the driver for this device:<br />
<br />
sudo modprobe usbserial vendor=0x4348 product=0x5523<br />
<br />
Finally, check dmesg again to ensure it loaded properly.<br />
<br />
dmesg<br />
<br />
Near the end, you should see something like:<br />
<br />
usbserial_generic 1-1:1.0: generic converter detected<br />
usb 1-1: generic converter now attached to ttyUSB0<br />
usbcore: registered new interface driver usbserial_generic<br />
<br />
Congratulations, your link is up - in this example, the device can be used on /dev/ttyUSB0. As much fun as you had doing this, there is some chance you want to do this automatically in the future. Just add this line:<br />
<br />
usbserial vendor=0x4348 product=0x5523<br />
<br />
to /etc/modules with the vendor and product numbers you found. Now, you should have no problem using this device for RepRap like a normal serial port. Huzzah! grinning smiley<br />
<br />
<br />
<br />
<br />
==package org.jdesktop.layout does not exist==<br />
This apparently means Ant or Eclipse or whatever environment you are building from can't find Netbeans. <br />
<br />
To get Ant to work I did the following:<br />
<br />
find / -iname '*swing-layout*jar' 2>/dev/null<br />
<br />
This spits back the location of the netbeans package. For me it was "~/projects/reprap/Reprap/lib/swing-layout-1.0.3.jar".<br />
<br />
Next I opened up ~/projects/reprap/Reprap/build.xml<br />
I then edited the javac element to contain the netbeans package in the classpath:<br />
<br />
<javac source="1.5" target="1.5" destdir="bin"><br />
<src path="src"/><br />
<classpath><br />
<path refid="project.classpath"/><br />
<path location="lib/swing-layout-1.0.3.jar"/><br />
</classpath><br />
</javac><br />
<br />
I'm not sure this is the best way, but it got things working for me.<br />
<br />
<br />
==Using reprap software on ubuntu karmic amd64==<br />
<br />
To install reprap on AMD64 [[Installing RepRap on your computer#Linux AMD64|See Here]]<br />
<br />
<br />
[[Category:Software]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D1%8D%D0%BA%D1%81%D0%BF%D0%BB%D1%83%D0%B0%D1%82%D0%B0%D1%86%D0%B8%D0%B8_RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22:_%D0%9F%D1%80%D0%BE%D0%B3%D1%80%D0%B0%D0%BC%D0%BC%D0%BD%D0%BE%D0%B5_%D0%BE%D0%B1%D0%B5%D1%81%D0%BF%D0%B5%D1%87%D0%B5%D0%BD%D0%B8%D0%B5&diff=13950Инструкция по эксплуатации RepRap II "Мендель": Программное обеспечение2010-03-24T19:50:27Z<p>Senyor: Created page with '{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}} …'</p>
<hr />
<div>{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}}<br />
<br />
== Introduction ==<br />
<br />
[[Image:opening.png|right|600px]]<br />
<br />
This page describes the host-computer software that allows you to load parts to be printed and that generates files from them to be sent to a RepRap machine.<br />
<br />
The host software works in two steps:<br />
<br />
# Load parts to be printed, and generate RepRap G-Code instructions from them, saving those G-Codes in a file.<br />
# Load up a resulting G-Code file and send it to a RepRap machine to print it.<br />
<br />
Both steps are described on this page.<br />
<br />
When you run the RepRap Java software it opens these two windows. The one on the left is a console that allows you to set up objects to be printed, to print them, and also to control the RepRap machine interactively. The one on the right is a plan view of the base of the machine onto which you can load STL files of the parts that you want to make, and then position them where you want the machine to make them.<br />
<br />
<br clear="all"><br />
<br />
== Loading things to print, then saving them as G-Codes ==<br />
<br />
[[Image:load-object.png|right|600px]]<br />
<br />
Typically you start by clicking on the blue "Load STL" button. This will put up a file-selector window, which you can use to find and select the STL file that represents the thing that you want to build.<br />
<br />
The thing will be loaded at the origin (bottom left). A pop-up window (shown) will appear for you to select how many copies of the thing to make, and what extruder to use to make them. Select the extruder you want for the surface of the object. (Relating infill and support extruders to surface extruders is described below.) <br />
<br />
You can rotate the view of the RepRap machine's base in the right-hand window with the left mouse button. The middle button zooms the view, and the right button slides it sideways or up and down.<br />
<br />
<br clear="all"><br />
<br />
[[Image:position-object.png|right|400px]]<br />
<br />
Normally you will not want to build the part right at the origin. If you point at the part with the mouse and left-click, it will change colour, indicating that it has been selected. You can then slide it about the base with the right mouse button to the position you want to build it in. The grid squares on the green base have 20 mm sides. You can rotate the selected object in 90<sup>o</sup> clicks about the X and Y coordinate axes by <ctrl> X, <ctrl> Y; <ctrl> Z rotates in 45<sup>o</sup> increments around Z. The last is to allow you to align an object at 45<sup>o</sup> and set up the infill (see even hatch direction and odd hatch direction) to cross hatch in the X and Y directions. This produces the same result as aligning the object with the coordinate axes, but reduces the energy used by the RepRap machine (most of the time, only one axis is being driven, rather than both). It also runs quieter. If your STL file was in inches you can scale the selected object to millimeters by multiplying by 25.4 with <ctrl> I. To delete the selected object use the <DELETE> key.<br />
<br />
To release the selected object, left-mouse-click on any other part of the green base. You will then be able to use the mouse to zoom, rotate and slide everything as one again.<br />
<br />
<br clear="all"><br />
<br />
=== Printing more than one thing at once ===<br />
<br />
You can load several STL files to build at once, either of different objects, or multiple copies of the same object. Just click on the blue "Load STL" button again, then position them in different places. Leave a gap of about 5mm between different objects to be built.<br />
<br />
If you have several STL files loaded in a pattern that you may want to use again, you can save the whole lot by selecting the "Save RFO" button. RFO files are a standard RepRap file format ([http://reprap.org/bin/view/Main/MultipleMaterialsFiles described here]) for saving collections of objects positioned on the machine's build base.<br />
<br />
You can also load one or more RFO files with the "Load RFO" button, select individual parts in them, move them about, or delete them, add extra STL files, and then save the lot as an RFO file again.<br />
<br />
=== Printing things made from more than one material ===<br />
[[Image:two-materials.png|right|600px]]<br />
<br />
This picture shows two interlocking but separate shapes designed in [http://artofillusion.org Art of Illusion]. If you position them both so the base (blue) shape is at the origin and the other part is in the correct relative position, and then save both as separate STL files, you can load them into the RepRap host software preserving the correct positions relative to each other, and build them from different (or the same) material. In this case, the dove-tail would cause the materials to interlock.<br />
<br />
<br clear="all"><br />
<br />
[[Image:dove.png|right|400px]]<br />
<br />
First load the STL of the shape that is the base or reference object. Choose the material to make it from, then select it (so it changes colour) but leave it at the origin where it was loaded.<br />
<br />
Then load the second STL for the second shape and choose its material. It will be positioned in the correct (''i.e.'' designed) position relative to the first, and they will both be locked together in this relative positioning. <br />
<br />
<br clear="all"><br />
<br />
[[Image:dove-tail.png|right|400px]]<br />
<br />
If you select the base shape, you can then move the composite object about the build base as one thing to the position where you want to build it.<br />
<br />
If you save one or more of these combined objects as an RFO file, they will be re-loaded in the correct orientation and position when you subsequently read that file in.<br />
<br />
This facility depends on the CAD system that was used to design the objects recording the X, Y and Z coordinates of the objects that you design actually at the place in the CAD system's coordinate system where you designed them when it writes them as STL files. Beware - not all CAD systems do this.<br />
<br />
<br clear="all"><br />
<br />
=== Infill and support ===<br />
<br />
You will see that there are a number of tabs on the console labelled Extruder_n. The RepRap host software is capable of dealing with multiple physical extruders depositing multiple materials. In addition, one physical material may have several logical extruders associated with it. These logical extruders can have different parameters associated with them, so that, for example, one might be used to extrude material-A finely for the surfaces of a part to be printed, another might be used to extrude material-A coarsely for quick solid infill of the part, and a third might extrude material-A in a deliberately weak pattern to form a support for overhangs that can easily be broken away. Alternatively, you can outline in material-A, infill in material-B and support with material-C.<br />
<br />
You can change all the many parameters of each extruder by clicking on "Preferences".<br />
<br />
In the preferences for each extruder are fields containing the names of two other extruders: InFillMaterialType(name) and SupportMaterialType(name). These are the extruders to use to build infill pattens and support patterns respectively for the material for the extruder that names them. See [[Java_Software_Preferences_File|the description of preferences]] for full details. To turn infill or support off for a particular material, change the appropriate field to say "null" (without the quotes).<br />
<br />
=== Sending the G-Codes to a file ===<br />
<br />
When you are happy with the layout, select the "Send GCodes to file" option, and then select "Print". This will put up another file-selector window to allow you to specify the G-Code file that you want to save the results in.<br />
<br />
If you wish, before selecting "Print" you can select "Display paths". This will open a graphics window that will show the paths that the machine will follow to make each Z-slice of the objects being printed.<br />
<br />
You can also select "Pause at end of layer". This pauses the generation of output at the end of each layer to allow you to inspect the slice pattern. Continue/Cancel buttons will be displayed as each layer is about to be written to allow you to continue or to cancel the whole process.<br />
<br />
When the GCode file has been written, exit the program with the "Exit" button.<br />
<br />
To print your GCode file that you just generated on your RepRap machine, see the next section.<br />
<br />
== The control console tabs ==<br />
<br />
If you are going to control your RepRap machine interactively, or get it to print a pre-computed G-Code file, plug the RepRap machine's USB cable into the computer before starting this host software.<br />
<br />
=== The Print tab ===<br />
<br />
[[Image:print.png|right]]<br />
<br />
Here is a list of all the buttons and options on the "Print" tab, and what they do.<br />
<br />
==== Load GCode ====<br />
<br />
To activate this, you will have to select "Print on GCode RepRap" (see below).<br />
<br />
If you have created a GCode file (as above, or from elsewhere) this allows you to load it for actual printing on the machine. You will be shown a file selector window to choose your GCode file. When you have specified this, just hit "Print".<br />
<br />
==== Load STL ====<br />
<br />
This lets you select STL files to load onto the RepRap's base for printing, as described above.<br />
<br />
==== Load RFO and Save RFO ====<br />
<br />
These allow the loading, printing, and saving of several multiple-material objects all in one go. (See above.)<br />
<br />
==== Print on GCode RepRap ====<br />
<br />
Select this to put the program in its mode where it sends a pre-computed G-Code file to the RepRap machine to print it. When you select this, the STL and RFO buttons will be greyed-out, as they are not active in this mode.<br />
<br />
==== Send GCodes to file ====<br />
<br />
Select this to put the program in its mode where it takes STLs or RFOs that you have loaded, slices them, and saves the commands to the RepRap machine needed to build them as G-Codes. When you select this, the GCode button will be greyed-out, as it is not active in this mode.<br />
<br />
==== Pause at end of layer ====<br />
<br />
Selecting this check-box will cause the software to pause at the end of each layer it makes from loaded STL or RFO files. At the start of the next layer a small window is displayed to allow you to instruct the software to continue (you can also cancel the build at such points).<br />
<br />
This button has no effect when building an object from a GCode file. This is because in general there is no way to tell from the contents of such a file where one layer ends and the next begins. But see the "Pause" button below.<br />
<br />
==== Display paths ====<br />
<br />
This opens a small graphics window in which the pattern of each layer is displayed as it is computed and saved to a G-Code file. <br />
<br />
==== Preferences ====<br />
<br />
Selecting this will open a tabbed window that will allow you to edit all the many parameters that control the operation of the RepRap machine. These parameters are [[Java_Software_Preferences_File|described here]].<br />
<br />
==== Print ====<br />
<br />
If you have loaded STL files this causes them to be converted to a G Code file and saved. If you have loaded a GCode file, this causes it to be printed on the RepRap machine.<br />
<br />
==== Pause ====<br />
<br />
When the RepRap machine is building something, this causes the machine to pause. The pause doesn't happen instantly as the control signals sent to the machine are held in a short buffer, and the pause button can have no effect until the buffer is exhausted.<br />
<br />
The "Pause" button becomes a "Resume" button once the machine has paused.<br />
<br />
==== Stop! ====<br />
<br />
At the moment this does the same as "Pause" above. We are working on getting it to stop the RepRap machine instantly.<br />
<br />
==== Exit ====<br />
<br />
This exits the program.<br />
<br />
==== Progress indicators ====<br />
<br />
At the bottom of the tab are the name of the file being printed, and a set of build-progress indicators. These give an estimate of the time the build will take, when it will end, and a layer count. There is also a progress bar.<br />
<br />
=== The XYZ tab ===<br />
<br />
[[Image:xyz.png|right]]<br />
<br />
The XYZ tab allows you to move your RepRap machine around directly for testing, experimenting, and servicing.<br />
<br />
The three numbers down the left are for you to type coordinates in as a target to go to. Selecting "Go" will then cause the RepRap machine to move to that position.<br />
<br />
The arrow keys nudge the axes by the distance specified in the "Nudge size" box at the bottom.<br />
<br />
The "Home" buttons cause the corresponding axis to drive to its low-value endstop position and to zero its coordinate. There is also a "Home all" button that homes all three axes at once.<br />
<br />
The "Sto" buttons store the current coordinate in the field on the right, and the "Rcl" button recalls that coordinate to become the target for a subsequent click of the "Go" button. This is particularly useful if you are in mid-build and have paused the RepRap machine. You can store the position where the machine paused ("Sto all") then move it about to do things like cleaning the extruder. Finally put it back where it paused ("Rcl all" followed by "Go") then resume the build.<br />
<br />
The "Axis speeds" are (I hope) self-explanatory. Note that these only control the axis speeds for the buttons in this tab. When you are saving G-Codes or using them to build an object, the software will use the speeds you set in the preferences file, and ignore the values in these boxes.<br />
<br />
If you check the "Plot using extruder" box and subsequently click "Go", the machine will plot the line using the selected extruder rather than just moving.<br />
<br />
<br />
=== The Extruder tabs ===<br />
<br />
[[Image:extrude.png|right]]<br />
<br />
The extruder tabs allow you direct control over the RepRap machine's extruders. ("Feedstock remaining" isn't implemented yet.) The tabs are divided into three sub-panels:<br />
<br />
==== Temperature ====<br />
<br />
This displays the current temperature of the extruder at the top. This temperature is updated every five seconds or so at all times when the RepRap machine is not transmitting a G-Code file to the machine to build.<br />
<br />
The target temperature allows you to set what temperature you want. Note that the temperature that initially appears in this box is the default one for the extruder (defined in the preferences file) and that changing the value in this box does not change the default; also, that default is what will be used for builds (as with speeds above). To change the default, select "Preferences" in the "Print" tab.<br />
<br />
Selecting the "Switch heat on" button will turn the extruder's heater on and you should see the temperature start to rise. The same button toggles the heater off. There is a progress bar for the temperature as it increases, and also a coloured panel that goes from blue to red as the extruder passes from a temperature that you can touch to one that you can't...<br />
<br />
Selecting the "Ramp" button will cause the extruder's heater to ramp up to the target temperature at a rate set by the "Ramp rate" box. This is useful for such things as curing fire-cement round a newly-constructed extruder by warming it up very slowly.<br />
<br />
Checking the "Cooling" box will turn the extruder's cooling fan on.<br />
<br />
==== Extrude ====<br />
<br />
Selecting the "Extrude" button will turn on the extruder's feed motor (if it has one) for a few seconds at a rate set by the speed box. The rate will be in millimeters of extrudate per minute. Once again, the initial speed is the one in the preferences file, and it is that preferences value that will be used for any actual build, not any number that you put in this box. The box just controls the speed on the "Extrude" button.<br />
<br />
Checking the "Reverse" box causes the motor to turn backwards.<br />
<br />
The "Close valve" button toggles the extruder's valve open and closed (if it has a valve).<br />
<br />
==== Maintenance ====<br />
<br />
These buttons are, I think, self-explanatory.<br />
<br />
== Alternatives ==<br />
<br />
There are alternative ways to run your RepRap than the one described on this page. Most notably these are the [http://fabmetheus.blogspot.com/2009/11/overview.html Skeinforge program], which is a tool chain that takes 3D objects and turns them into GCode files for sending to a RepRap, and [http://code.google.com/p/replicatorg/ ReplicatorG], which is a program for taking GCode files and printing the objects they represent on a RepRap machine.<br />
<br />
For minimalist transmission of Gcode files to a RepRap using Linux/Unix machines from the command line, there are [http://github.com/Ralith/reprap-utils/tree gcdump, and gcgen] to create Gcode commands for simple RepRap control. These are available as C source or pre-compiled binaries and work well on the OLPC.<br />
<br />
[[Category:Software]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D1%8D%D0%BA%D1%81%D0%BF%D0%BB%D1%83%D0%B0%D1%82%D0%B0%D1%86%D0%B8%D0%B8_RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22:_%D0%9F%D1%80%D0%BE%D1%88%D0%B8%D0%B2%D0%BA%D0%B0_%D0%BC%D0%B8%D0%BA%D1%80%D0%BE%D0%BA%D0%BE%D0%BD%D1%82%D1%80%D0%BE%D0%BB%D0%BB%D0%B5%D1%80%D0%B0&diff=13949Инструкция по эксплуатации RepRap II "Мендель": Прошивка микроконтроллера2010-03-24T19:49:48Z<p>Senyor: Created page with '{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}} …'</p>
<hr />
<div>{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}}<br />
<br />
== Testing the extruder board ==<br />
<br />
This page seems to have been disappearing into the depths of the wiki,<br />
[http://www.reprap.org/bin/view/Main/Extruder_Controller_2_2 Extruder V2.2]<br />
<br />
At the bottom of the page is some sample code to test out your board.<br />
<br />
[[Category:Software]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=%D0%A1%D0%B1%D0%BE%D1%80%D0%BA%D0%B0/%D0%A1%D0%BF%D0%BE%D1%81%D0%BE%D0%B1%D1%8B_%D0%9D%D0%B0%D1%81%D1%82%D1%80%D0%BE%D0%B9%D0%BA%D0%B8&diff=13948Сборка/Способы Настройки2010-03-24T19:49:07Z<p>Senyor: Created page with '{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}} …'</p>
<hr />
<div>{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}}<br />
<br />
== Configuration ==<br />
OK, you've built your RepRap - from a kit, or from scratch. But, before you go off building STL files, there's a bit of work to be done.<br />
Your machine has to be configured. Looking at the preferences files, there are *hundreds* of numbers. <br />
'''DON'T PANIC'''<br />
Most of the numbers are fine at the defaults - until you're more experienced. However, there are some key settings that really need to be correct. <br />
<br />
== Configuration Files ==<br />
Where are they?<br />
If you're using the 'official' java host software and the SNAP arduino firmware, they will be available through the 'Preferences' button. <br />
(For programmers, on linux they are stored in the text file ~/.reprap/reprap.properties)<br />
<br />
<br />
=== SNAP firmware ===<br />
The thermistor/thermocouple settings are stored in the arduino software.<br />
<br />
=== GCode firmware ===<br />
This is the recommended firmware. After you opened the GCode firmware with the Arduino software, you'll see the tabs 'parameters.h' and 'pins.h'. Those are the main configuration files.<br />
<br />
If you are using Sanguino or Arduino Mega, uncomment this line in parameters.h: <br />
<br />
// #define SANGUINO <br />
<br />
When you edit pin configurations, be sure that you are in the right section (eg. #ifdef SANGUINO)<br />
<br />
If any setting is changed in the firmware, it has to be re-compiled, and re-uploaded to the Arduino/Sanguino.<br />
<br />
Note that the same parameters (e.g. steps per mmm) in the host software will be ignored.<br />
While using GCode firmware, other settings will be in the host software, or the Skeinforge preferences.<br />
<br />
== Bug in GCode firmware 1.4 using DC motors ==<br />
If you are using DC motors you have to fix a bug in the firmware. <br />
<br />
* In pins.h you have: <br />
<br />
#define EXTRUDER_0_STEP_ENABLE_PIN (byte)-1<br />
<br />
Since byte is unsigned (and later compared to (byte) < 0), this will have no effect. Change this to:<br />
#define EXTRUDER_0_STEP_ENABLE_PIN (int)-1<br />
<br />
* in extruder.h<br />
// The pins we control<br />
byte motor_dir_pin, motor_speed_pin, heater_pin, fan_pin, temp_pin, valve_dir_pin, valve_en_pin step_en_pin;<br />
to<br />
// The pins we control<br />
byte motor_dir_pin, motor_speed_pin, heater_pin, fan_pin, temp_pin, valve_dir_pin, valve_en_pin;<br />
int step_en_pin;<br />
then<br />
extruder(byte md_pin, byte ms_pin, byte h_pin, byte f_pin, byte t_pin, byte vd_pin, byte ve_pin, byte se_pin);<br />
<br />
to<br />
extruder(byte md_pin, byte ms_pin, byte h_pin, byte f_pin, byte t_pin, byte vd_pin, byte ve_pin, int se_pin);<br />
<br />
* in extruder (.pde)<br />
extruder::extruder(byte md_pin, byte ms_pin, byte h_pin, byte f_pin, byte t_pin, byte vd_pin, byte ve_pin, byte se_pin)<br />
<br />
to<br />
<br />
extruder::extruder(byte md_pin, byte ms_pin, byte h_pin, byte f_pin, byte t_pin, byte vd_pin, byte ve_pin, int se_pin)<br />
<br />
that should be it (is there any bug tracker for the software btw?). <br />
<br />
<br />
== Configuration Methods ==<br />
<br />
* [[Builders/Config/Config_Axes]] Measuring and configuring the x, y and z axes <br />
* [[Builders/Config/Config_Extruder]] Measuring and configuring the extruder</div>Senyorhttps://reprap.org/mediawiki/index.php?title=%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D1%8D%D0%BA%D1%81%D0%BF%D0%BB%D1%83%D0%B0%D1%82%D0%B0%D1%86%D0%B8%D0%B8_RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22:_%D0%AD%D0%BA%D1%81%D1%82%D1%80%D1%83%D0%B4%D0%B5%D1%80&diff=13947Инструкция по эксплуатации RepRap II "Мендель": Экструдер2010-03-24T19:48:10Z<p>Senyor: Created page with '{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}} …'</p>
<hr />
<div>{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}}<br />
<br />
Getting a reliable extruder to work can be a bit problematic. Sometimes it blocks and needs cleaning. Also the optimum temperature varies with the type of plastic and an incorrect temperature gives problems. This page lists some typical problems and solutions.<br />
<br />
=Extruder jams with melted filament at the end of the brass barrel, starts to flow backwards=<br />
Try and increase the temperature of the extruder heater. If the temperature is too low, not all the plastic can melt and only the plastic touching the barrel gets enough hot to melt and do a back flow.<br />
<br />
Read more here:<br />
* [http://casainho-emcrepstrap.blogspot.com/2010/03/extruder-backflow-problemsolution-and.html Casainho blog message about extruder backflow problem/solution]<br />
* [http://spoolhead.blogspot.com/2010/02/extruders-pt-1-backflow-and-bench.html Extruders Pt. 1: Backflow and Bench Experiments]<br />
<br />
=Final printed piece have a kind of displacement on XY axis, and when I see extruder going against ooze, then it gets that XY displacement=<br />
Try to build the [[Spring_extruder]], it automatically flexes when it goes against ooze or something blocking its path, and then it returns to where it should be. Alternatively, try increasing the current going through the steppers so it needs more force in order to slip.<br />
<br />
=The stepper motor stalls and can't move the filament=<br />
You might try increasing the gap between the splined shaft and the tension wheel. Particularly with hard plastics like PLA, you can get problems if you try and push it though too small a hole. If the extruder design allows, using a spring to allow for varying filament sizes can work well.<br />
<br />
=It takes a long time after the extruder motor stops before the flow of molten plastic stops=<br />
Its possible the temperature is too low, so the excessively viscous plastic takes too long to escape through the nozzle. Try increasing the temperature, or you can experiment with reversing the stepper instead of merely stopping it. [LINK NEEDED]<br />
<br />
=The temperature reading fluctuates by more than a few degrees, or the viscosity of the plastic appears to vary greatly=<br />
It may well be that the thermistor/thermocouple isn't well attached to the nozzle. Check the body of the sensor is actually touching the metal of the nozzle, and as near as possible to the tip. Its also possible that the high currents in the heater/stepper wires are inducing a current in the sensor wires, messing with the readings. Experiment with moving the sensor wires further away to see if it helps. Finally, its possible the voltage across the thermocouple amp is changing, particularly if you're powering it off the same PSU as the steppers/heaters. The 5V from a usb port is far more stable, try powering the circuit from there if you can.<br />
<br />
=Printed objects show brown/beige discolouration.=<br />
The temperature is probably too high, try reducing it. If the discolouration only occurs sometimes, especially when the extruder isn't doing much, it probably means that your temperature sensor isn't well attached to the tip of the nozzle. It can help to put a bit of insulation around the barrel to keep the temperature a little more even if this is the case.<br />
<br />
=The stepper shaft grinds through the filament instead of gripping it.=<br />
Try moving the tension wheel closer to the stepper shaft, or slowing down the motor. If this happens only from time to time, it may be that your filament isn't even enough, which can be remedied by adding springs to the tension wheel to compensate. It may also be that whatever method you're using to add friction to the shaft (splines, teeth, gears) isn't good enough. Cutting a worm thread with a lathe appears to be the most reliable method if you have the tools, but there are some alternatives here [[Pinch_wheel_variations]].<br />
<br />
=Links=<br />
This are links to blog messages, forum messages, etc. WARNING: not all things written may be correct:<br />
* [http://spoolhead.blogspot.com/2010/02/extruders-pt-1-backflow-and-bench.html Extruders Pt. 1: Backflow and Bench Experiments]<br />
* [http://spoolhead.blogspot.com/2010/02/extruders-pt-2-add-oil.html Extruders Pt. 2: Add oil]<br />
* [[Pinch_wheel_variations]]<br />
<br />
[[Category:Extruders]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=%D0%A1%D0%B1%D0%BE%D1%80%D0%BA%D0%B0/%D0%9D%D0%B0%D1%81%D1%82%D1%80%D0%BE%D0%B9%D0%BA%D0%B0/%D0%A1_%D1%87%D0%B5%D0%B3%D0%BE_%D0%BD%D0%B0%D1%87%D0%B0%D1%82%D1%8C&diff=13946Сборка/Настройка/С чего начать2010-03-24T19:47:16Z<p>Senyor: Created page with '{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}} …'</p>
<hr />
<div>{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}}<br />
<br />
== Getting Started ==<br />
You've built the electronics, and all the LEDs light up. You've assembled your kit/finished your home build.<br />
You've plugged your electronics into the completed mechanics, and wired the electronics to the Arduino/Sanguino using the wiring diagram (note the pin numbers)<br />
<br />
Now you need to turn it on an test stuff.<br />
<br />
NOTE: Keep your hand on the 'Emergency stop' - this is the RepRap power supply plug or switch. Make sure you can turn it off easily.<br />
IF ANYTHING GOES WRONG turn it off. Turn it off first, then work out what's wrong after.<br />
<br />
STEP 1: Do a pre-flight check. Look round all the RepRap joints and mechanisms, looking for anything broken or out of place. Give the electronics a once-over, looking for loose wires, cables in the wrong place. Move the x and y axis by hand, and check over the z-belt. Check that your endstops line up with the endstop flags.<br />
<br />
Turn the host PC on and plug in the Arduino. Upload the SNAP or GCode firmware. (Shut down the arduino software before starting the host software)<br />
<br />
Turn on the RepRap.<br />
<br />
The LEDs should come on. You might get a 'click' as the steppers power up and move slightly. Nothing else should move.<br />
<br />
Load up the host software. Click on the xyz tab.<br />
<br />
Jog the X axis 1mm. It should move a very short distance. Jog it back 1mm.<br />
<br />
Jog the Y axis 1mm back and forth.<br />
<br />
Check that your extruder head is *well* off the platform. Jog the Z axis 1mm up and down.<br />
<br />
Assuming all has gone well: if not, stop, diagnose the problem (check leads, mechanics, voltages), repeat test until working<br />
<br />
Repeat X,Y and Z tests with 10mm or 20mm steps. Don't worry if it moves a bit more than 10mm, that config comes later.<br />
<br />
Be careful with the Z axis - don't run it into the extruder (too far up) or into the bottom (too far down). Check the belt/chain is smooth and works properly.<br />
<br />
Check your Z Axis endstop. make sure the distance between your flag and endstop is LESS than the distance between your extruder nozzle and your platform. Once you press HOME, the platform will move up until the endstop is triggered. If your extruder is in the way, it might be broken off or damaged.<br />
<br />
<br />
<br />
If the endstop fails, or the flag misses the gap in the endstop, you have to turn the power off before it crashes into the end and makes horrible grinding noises.<br />
* Test 1 - direction. Carefully press X-axis HOME button keeping your hand on the Emergency stop. Note the direction, and POWER OFF. Hopefully, your extruder head moved towards the endstop. If your head moves away from the endstop, turn the power off, edit the arduino settings for x-axis direction, and re-upload. Re-test.<br />
* Test 2 - Endstop. Carefully press X-axis HOME button keeping your hand on the Emergency stop, and block the endstop using a screwdriver/bit of card/something. The axis should stop immediately. If not, POWER OFF and find out why. <br />
* Test 3 - Turn the POWER OFF and move the x-axis by hand to check the flag lines up with, and goes into, the endstop. (If you leave the power on, the stepper motor stops you moving the axis)<br />
* Test 4 - HOME. Press X-axis HOME button keeping your hand on the Emergency stop, and watch the axis move to the endstop and stop. <br />
If your head moved to the end and stopped - great!<br />
<br />
Repeat for the Y axis, and then *Carefully* for the Z-Axis. There's more to go wrong with the z-axis, several different belts/chains/screwthreads, so be careful.<br />
<br />
You should now have a working cartesian robot.</div>Senyorhttps://reprap.org/mediawiki/index.php?title=%D0%9C%D0%BE%D0%BD%D1%82%D0%B0%D0%B6_%D0%BF%D1%80%D0%BE%D0%B2%D0%BE%D0%B4%D0%BE%D0%B2&diff=13945Монтаж проводов2010-03-24T19:45:57Z<p>Senyor: </p>
<hr />
<div>{{Template:Mendel Documentation Header Ru}}<br />
{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}}<br />
<br />
=Introduction=<br />
<br />
This page describes how to wire up RepRap Version II "Mendel". Before you wire the machine up, [[Testing_RepRap_Electronics|test the circuit boards individually as described on this page.]]<br />
<br />
[[Image:wiring-diagram.png|900px]]<br />
<br />
This is the overall Mendel wiring diagram; click the image for a full-resolution version. The wiring diagram is stored as an [[http://cadsoft.de/ Eagle]] schematic in your download at mendel/electronice/mendel-wiring-diagram.sch. The latest version is in the [[http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/mendel/electronics/mendel-wiring-diagram.sch?view=log RepRap subversion repository here]], but that may be an unstable version in development. In the diagram above multi-way connections are shown as thick lines with a number next to them. The number is the number of wires in the connection. Numbers in brackets are the lengths of the wires in centimeters. Thin wires are single wires.<br />
<br />
One Mendel will need:<br />
<br />
* A RepRap Motherboard,<br />
* A Mendel USB and power connector,<br />
* 3 RepRap Stepper drivers,<br />
* 3 RepRap Opto Endstops, and<br />
* As many RepRap extruder controllers as you have extruders.<br />
<br />
For details on the individual printed circuit boards and how to build or adapt them, [[Circuit_board_construction |follow this link]].<br />
<br />
The power wiring is not shown on the diagram for clarity, but it is very simple. The 12 volts from the [[Mendel USB and power connector]] is connected in parallel to the three stepper driver boards and to all the extruder controller boards. The Motherboard does not need to be connected to Mendel's internal power connectors. It is powered by the USB connection from the computer. <br />
<br />
The extruders are connected in parallel to the RS485 and to the SDA and SCL ports on the Motherboard. The system only has four connectors for these on the Motherboard, but you can chain these together up to any reasonable number (in theory it should be possible to drive 64 extruders at once...).<br />
<br />
=Wiring Video=<br />
<br />
The following video shows the runs of all the wires:<br />
<br />
<videoflash type="vimeo">8397407|640|480</videoflash><br />
<br />
=Power Cabling=<br />
<br />
Start by wiring up the 12-volt power cables. You'll need 1.1 m of twin wires.<br />
<br />
The standard RepRap 12v power connector is a [http://en.wikipedia.org/wiki/XLR_connector 3-pin XLR connector]. <br />
<br />
[[Image:XLR-connector.png|300px]]<br />
<br />
The picture immediately above is looking into the socket (female) and at the pins (male). Pin 1 is the ground (negative) connection and pin 2 is +12v connection. Pin 3 is not used. Mendel has a panel-mounted male plug connector.<br />
<br />
Use wires of different colours that are capable of taking 8 amps. If your wires are not twisted or paired you can easily twist them up yourself by putting one end of the pair in a vice, the other end in a hand twist-drill chuck, and winding. Do all the wire at once, then cut it.<br />
<br />
[[Image:chock-block.jpg|500px|right]]<br />
Attach a four-way "chocolate-block" connector beside the XLR power input. You may need to drill a couple of extra 3mm holes in the stepper-plate, depending on the hole-gaps in your connector.<br />
<br style="clear:both;"/><br />
<br />
[[Image:Xlr-power-mendel-plug.jpg|500px|right]]<br />
Solder two short wires to the XLR power connector as shown. Measure them to the two central connections in the chocolate-block. Then untwist them, put heatshrink on the terminals, and twist them up again. Make two small U-shaped pieces of wire to attach the two central chocolate-block connectors to the two outside ones. Put all the wires in the block, but don't tighten the screws yet.<br />
<br style="clear:both;"/><br />
<br />
==Stepper Cabling==<br />
<br />
[[Image:stepper-power.jpg|500px|right]]<br />
Chain the stepper driver boards' power connections together back to the chocolate-block.<br />
<br style="clear:both;"/><br />
<br />
==Extruder Cabling==<br />
<br />
[[Image:extruder-power-taped.jpg|500px|right]]<br />
Run wires up the leg to the extruder board as shown.<br />
<br style="clear:both;"/><br />
<br />
==Finishing the power wiring and testing==<br />
<br />
Tighten all the screw connectors. Tug each wire with long-nosed pliers to make sure it is securely connected.<br />
<br />
Use a continuity tester to make sure that: <br />
<br />
# The power is getting to each board,<br />
# The two power lines are not shorted, and<br />
# '''The polarity on each board is correct'''.<br />
<br />
=Stepper wiring=<br />
<br />
[[Image:idc-vice.jpg|400px|right]]<br />
<br />
When making up ribbon cables for the stepper control boards us 10-way insulation-displacement connectors (IDCs) on the ribbon cables. A pair of these should be the same way round. That is to say, when you put the cable flat on the bench, the projecting tabs on the IDC connectors that key with the sockets on the boards should both point the same way.<br />
<br />
It is simple to put an IDC connector on a ribbon cable using an ordinary vice. You don't need a special tool. Push the cable through the connector so that it projects about 2 mm clear on the other side. Check that it is square and not at an angle. Push it together loosely by hand, then place it between the jaws of a vice. Tighten the vice gently to make the connection. Finally trim the 2mm projecting wires with a sharp blade making sure that you don't leave wire threads shorting.<br />
<br />
The wires between the X stepper motor and its control board are quite long. You may need to solder extensions onto the steppper. Cut the stepper wires off at a length of about 50 mm, bare the ends, and put lengths of heat-shrink on them. Bare the ends of some 4-way ribbon cable and twist them onto the stepper wires. This will be neatest if you overlap them from opposing directions, though that will make twisting harder. Solder them, then put the heat-shrink on to insulate the connections.<br />
<br />
<br clear="all"><br />
<br />
=Optoswitch wiring=<br />
<br />
[[Image:stepper-5v.jpg|400px|right]]<br />
It is important to check the polarity of the opto-switch wiring. The connectors are marked GND, SIG and VCC. Using a meter check that the GND connection is connected to the 0v wire on the power chocolate block. The VCC connection should go to the 5-volt output of the 7805 regulator chip on the stepper controller board for the opto-switch. That is the pin by the letter D with the green dot in the picture.<br />
<br />
The opto-switch plugs in at A. VCC is the pin at the top in this picture, the signal pin is in the middle, and GND is at the bottom.<br />
<br />
<br clear="all"><br />
<br />
=USB wiring=<br />
<br />
The green (RTS) side of the [[Mendel_USB_and_power_connector|USB<->TTL cable]] goes to the top of the Motherboard to the pin labeled GRN, and the black (GND) side goes to the bottom labeled BLK.<br />
[[Category:Electronics]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=Mendel_mechanical_construction/ru&diff=13944Mendel mechanical construction/ru2010-03-24T19:45:23Z<p>Senyor: </p>
<hr />
<div>{{Template:Mendel Documentation Header Ru|Изготовление и сборка механики}}<br />
{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}}<br />
<br />
[[Image:Mendel GA axes designation.JPEG|350px|right|General assembly of Mendel]]<br />
These pages will show you how to build the mechanical structure of RepRap Version II "Mendel". Check out the [[Mendel Overview|overview]] to get a fast introduction to Mendel's design. The [[Mendel assembly data sheet]] has been designed to provide all the procurement and assembly data you need, and can be relied upon if you prefer not to follow instructions. However, it's recommended that you do assembly in the order of the list below.<br />
<br />
# [[Mendel Overview|Overview]] <br />
# [[Mendel solid model files|Mendel solid model files]]<br />
# [[Mendel materials procurement|Procurement]]<br />
# [[Mendel materials preparation|Preparation of materials]] <br />
# [[Mendel assembly notes|Assembly notes]] <br />
# [[Mendel extruder|Extruder]] <br />
# [[Mendel X-axis|X-axis]] <br />
# [[Mendel Z-axis|Z-axis]] <br />
# [[Mendel Y-axis|Y-axis]] <br />
# [[Mendel circuit boards|Circuit board attachment]] <br />
# [[Mendel frame|Frame]] <br />
# [[Mendel squaring axes|Squaring the axes]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=%D0%9F%D1%80%D0%BE%D1%88%D0%B8%D0%B2%D0%BA%D0%B0_%D0%BC%D0%B8%D0%BA%D1%80%D0%BE%D0%BA%D0%BE%D0%BD%D1%82%D1%80%D0%BE%D0%BB%D0%BB%D0%B5%D1%80%D0%B0&diff=13943Прошивка микроконтроллера2010-03-24T19:45:00Z<p>Senyor: </p>
<hr />
<div>{{Template:Mendel Documentation Header Ru}}<br />
{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}}<br />
<br />
{|<br />
[[Image:motherboard-programming.jpg|500px|right]]<br />
|RepRap has a Motherboard that is the overall controller of the machine. Each extruder has a subsidiary controller. The motherboard and extruder controllers have to be programmed. This page tells you how to do that.<br />
<br />
{{Alternative Toolchain Notice|firmware|install}}<br />
<br />
Both the motherboard and the extruder controllers need to have a bootloader installed before you can upload programs to them. This only needs to be done once, and, if you bought ready-made boards, the bootloader will already have been installed in them. But if you made the boards yourself you will have to do that. [[Burning_the_Sanguino_Bootloader|Bootloader-installing instructions are here]].<br />
<br />
__TOC__<br />
|}<br />
<br />
==Before you start==<br />
===Setting up Arduino Software for Sanguino===<br />
<br />
Before you can download into your Sanguino motherboard, you need to have the Arduino environment set up to be able to recognize the different Atmel 644p processor.<br />
<br />
Download and install [http://arduino.cc/en/Main/Software Arduino software], then download the core information from Zach's [http://code.google.com/p/sanguino/downloads/list Sanguino site].<br />
<br />
In the downloaded core files you will need to copy the folders to their respective locations.<br />
<br />
* copy sanguino-software-1.x/cores/sanguino to arduino/hardware/cores/sanguino<br />
* copy sanguino-software-1.x/bootloaders/atmega644p to arduino/hardware/bootloaders/atmega644p<br />
* copy all the folders in sanguino-software-1.x/libraries/ to arduino/hardware/libraries/ overwriting the existing libraries.<br />
<br />
Next you need to edit the boards.txt file to add the Sanguino to the available boards.<br />
It can be found in arduino/hardware/boards.txt <br />
<br />
Restart the Arduino environment and you can now download your firnware to the Sanguino.<br />
<br />
The full set of instructions are also available from [http://sanguino.cc/softwareforwindows here.]<br />
<br />
==Programming the Motherboard==<br />
===Compiling===<br />
<br />
The C++ program to be loaded into the Motherboard is in the directory ''mendel/firmware/FiveD_GCode/FiveD_GCode_Interpreter'' of the download. The latest version is [http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/mendel/firmware/FiveD_GCode/FiveD_GCode_Interpreter/ here in the RepRap Subversion repository], but take care with that - it may be an unstable development version.<br />
<br />
In your download directory there is a distribution configuration file called ''configuration.h.dist''. Copy that file to a new file called ''configuration.h''. The reason for this copying is that, when you download a new version of RepRap, you may not want to over-write your personal configuration file.<br />
<br />
Run the [http://arduino.cc Arduino Development Environment] and load up the sketchbook ''mendel/firmware/FiveD_GCode/FiveD_GCode_Interpreter/FiveD_GCode_Interpreter.pde''. Your new ''configuration.h'' file should appear as one of the tabs.<br />
<br />
Click on that tab and read through the file. It is extensively commented and gives instructions on what to do to configure the firmware for your particular RepRap setup. When you have edited it, select ''File->Save''.<br />
<br />
In the Arduino Development Environment select ''Tools->Board->Sanguino'' then select ''Sketch->Verify/Compile''.<br />
<br />
The program should compile without errors.<br />
<br />
===Uploading===<br />
<br />
Plug the [[Mendel USB and power connector|USB<->serial cable you made up on this page]] into the six-pin connector on the left edge of the Motherboard as shown. Make sure you get it the right way round. The RTS connection (which you should have coloured green) goes to the top end of the Motherboard connector labeled "GRN". The ground connection (coloured black) goes at the bottom, labeled "BLK".<br />
<br />
Check that you have a jumper fitted on the 2-pin connector by C8 on the Motherboard just to the right of the 6-pin connector you're using. It is this jumper that allows the board to be programmed.<br />
<br />
Plug a USB cable into the USB-B socket, but don't connect the other end to your computer yet.<br />
<br />
Check the list of connections at ''Tools->Serial Port'' and note them. Then plug in the USB cable and check the list again - a new entry should have appeared (on Linux it will be something like ''/dev/ttyUSB0'', and on Windows it will be something like ''COM5''). Select that new entry if it hasn't automatically been selected by the Arduino software - it is the USB interface that you just plugged in.<br />
<br />
Incidentally - the Power LED on the Motherboard should now be alight. The Motherboard is USB powered.<br />
<br />
Select ''Upload to I/O Board'' (the little square box with the right -> arrow). After a few seconds the debug LED on the Motherboard should flicker - this is the program being loaded into the board.<br />
<br />
After a few more seconds the Arduino Development Environment should say ''Done uploading'' and the debug LED should settle down to a regular pulse at about 2 Hz. That is the RepRap program running on the Motherboard.<br />
<br />
If the upload doesn't work, unplug the USB cable, wait a couple of seconds, and plug it back in. Then (with your non-mouse hand) hold down the Motherboard's RESET button. Hover the mouse over the ''Upload to I/O Board'' box, release the RESET, then almost immediately click the mouse.<br />
<br />
To see how to test the programmed Motherboard, follow [[Testing_RepRap_Electronics#Testing_the_Motherboard |this link]].<br />
<br />
==Programming an Extruder Controller==<br />
<br />
[[Image:extruder-programming.jpg|500px|right]]<br />
<br />
The procedure for this is very similar to that for programming the Motherboard.<br />
<br />
===Compiling===<br />
<br />
The C++ program to be loaded into Extruder Controllers is in the directory ''mendel/firmware/FiveD_GCode/Extruder'' of the download. The latest version is [http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/mendel/firmware/FiveD_GCode/Extruder/ here in the RepRap Subversion repository], but take care with that - it may be an unstable development version.<br />
<br />
In your download directory there is a distribution configuration file called ''configuration.h.dist''. Copy that file to a new file called ''configuration.h''. The reason for this copying is that, when you download a new version of RepRap, you may not want to over-write your personal configuration file.<br />
<br />
Run the [http://arduino.cc Arduino Development Environment] and load up the sketchbook ''mendel/firmware/FiveD_GCode/Extruder/Extruder.pde''. Your new ''configuration.h'' file should appear as one of the tabs.<br />
<br />
Click on that tab and read through the file. It is quite short. The comments give instructions on what to do to configure the firmware for your particular extruder setup. When you have edited it, select ''File->Save''.<br />
<br />
If you are using a thermistor as an extruder temperature sensor you should also look at the file ''temperature.h''. Select the table that corresponds to your thermistor. If you are using a thermistor for which there is not a standard table that is not a problem. There's a Python program to generate tables for any thermistor. The program is in your RepRap files at ''mendel/firmware/createTemperatureLookup.py''. [http://dev.www.reprap.org/bin/view/Main/Thermistor See this page for details].<br />
<br />
In the Arduino Development Environment select ''Tools->Board->Arduino Diecimila or Duemilanove w/ ATmega 168'' then select ''Sketch->Verify/Compile''.<br />
<br />
The program should compile without errors.<br />
<br />
===Uploading===<br />
<br />
Plug the [[Mendel USB and power connector|USB<->serial cable you made up on this page]] into the six-pin connector on the left edge of the Extruder Controller as shown. Make sure you get it the right way round. The RTS connection (which you should have coloured green) goes to the bottom end of the Extruder Controller connector labeled "GRN/RTS". The ground connection (coloured black) goes at the top, labeled "BLK/GND".<br />
<br />
Plug a USB cable into the USB-B socket, but don't connect the other end to your computer yet.<br />
<br />
Check the list of connections at ''Tools->Serial Port'' and note them. Then plug in the USB cable and check the list again - a new entry should have appeared (on Linux it will be something like ''/dev/ttyUSB0'', and on Windows it will be something like ''COM5''). Select that new entry if it hasn't automatically been selected by the Arduino software - it is the USB interface that you just plugged in.<br />
<br />
Incidentally - the Power LED on the Extruder Controller should now be alight. The Extruder Controller is USB-powered for programming, and self-powered when it is running from its 12 volt supply. You may find that some of the other LEDs light as well - this is fine.<br />
<br />
Select ''Upload to I/O Board'' (the little square box with the right -> arrow). After a few seconds the debug LED on the Extruder Controller should flicker - this is the program being loaded into the board.<br />
<br />
After a few more seconds the Arduino Development Environment should say ''Done uploading'' and the debug LED should go out.<br />
<br />
If the upload doesn't work, unplug the USB cable, wait a couple of seconds, and plug it back in. Then (with your non-mouse hand) hold down the Extruder Controller's RESET button. Hover the mouse over the ''Upload to I/O Board'' box, release the RESET, then almost immediately click the mouse.<br />
<br />
To see how to test a programmed extruder controller, follow [[Testing_RepRap_Electronics#Testing_an_Extruder_Controller |this link]].<br />
<br />
==See also==<br />
<br />
See also the [http://www.reprap.org/bin/view/Main/Generation3Firmware Generation 3 Firmware] page.</div>Senyorhttps://reprap.org/mediawiki/index.php?title=%D0%A3%D1%81%D1%82%D0%B0%D0%BD%D0%BE%D0%B2%D0%BA%D0%B0_%D0%9F%D0%9E_RepRap_%D0%BD%D0%B0_%D0%BA%D0%BE%D0%BC%D0%BF%D1%8C%D1%8E%D1%82%D0%B5%D1%80%D0%B5&diff=13942Установка ПО RepRap на компьютере2010-03-24T19:44:02Z<p>Senyor: </p>
<hr />
<div>{{Template:Mendel Documentation Header Ru}}<br />
{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}}<br />
<br />
{|-<br />
[[Image:material-select.png|600px|right]]<br />
|<br />
{{Alternative Toolchain Notice|software|install}}<br />
<br />
<br />
__TOC__<br />
|}<br />
<br style="clear:both;"/><br />
<br />
==Prerequisites==<br />
<br />
The RepRap software currently runs under 32-bit Linux or Microsoft Windows. We are working on adding Mac and 64-bit versions.<br />
<br />
You will need Java on your computer. If you don't have it already, get it here: <br />
<br />
* [http://java.com/ http://java.com/]<br />
<br />
The Host software is still a little buggy on Windows with Java 6 installed, if you encounter any problems with Java 6 and the software, try uninstalling Java 6 and install the latest Java 5 runtime from:<br />
<br />
* [http://java.sun.com/products/archive/ http://java.sun.com/products/archive/]<br />
<br />
You will also need to download and install the Arduino development environment to build the firmware for your RepRap machine. That is available here:<br />
<br />
* [http://arduino.cc/ http://arduino.cc/]<br />
<br />
You will need to download and install the Sanguino add-ons for Arduino. Get them here:<br />
<br />
* [http://sanguino.cc/ http://sanguino.cc/]<br />
<br />
Finally in this section, you may care to take a look at software that is useful for RepRap, but not required to run it. There's a list here:<br />
<br />
* [[Useful Software Packages]]<br />
<br />
==Download==<br />
<br />
Download the RepRap distribution from Sourceforge:<br />
<br />
[http://sourceforge.net/projects/reprap/ http://sourceforge.net/projects/reprap/]<br />
<br />
There are a number of files and packages from the project available there, but the main download (which is about 65 MB) will have a name like reprap-nnnnnn-yyyymmdd.zip. This is the one file you want. It is the main Sourceforge download for RepRap; nnnnnn is the name of the current RepRap machine and yyyymmdd is the date of the release. <br />
<br />
==Linux Installation==<br />
<br />
You can install and use RepRap in your own file-space under Linux. <br />
<br />
===In your own space===<br />
<br />
Unzip the downloaded file:<br />
<br />
<pre><br />
$ unzip reprap-nnnnnn-yyyymmdd.zip<br />
</pre><br />
<br />
This will create a directory called reprap-nnnnnn-yyyymmdd (with the name of the current RepRap machine and the distribution date substituted, clearly). To run the RepRap software simply move to that directory and run the file named reprap:<br />
<br />
<pre><br />
$ cd reprap-nnnnnn-yyyymmdd<br />
$ ./reprap<br />
</pre><br />
<br />
===Installing for all users===<br />
<br />
If you want RepRap to be available system-wide to all users, you will need to log in as the superuser to install it.<br />
<br />
Assume you downloaded reprap-nnnnnn-yyyymmdd.zip into the directory /xxx/yyy. Move to the directory /usr/local, then unpack it:<br />
<br />
<pre><br />
# cd /usr/local<br />
# unzip /xxx/yyy/reprap-nnnnnn-yyyymmdd.zip<br />
</pre><br />
<br />
Then move to the /usr/local/bin directory and create a short shell script called reprap using your favourite text editor (gedit in the example).<br />
<br />
<pre><br />
# cd /usr/local/bin<br />
# gedit reprap<br />
</pre><br />
<br />
Copy and paste these three lines into the script, then save it:<br />
<br />
<pre><br />
#!/bin/sh<br />
cd /usr/local/reprap-nnnnnn-yyyymmdd<br />
./reprap<br />
</pre><br />
<br />
(Don't forget to replace the nnnnnn and the yyyymmdd with the right strings for your distribution file.)<br />
<br />
Finally, set execute permission on the file:<br />
<br />
<pre><br />
# chmod 755 reprap<br />
</pre><br />
<br />
Any user will now be able to run the software just by typing the command "reprap".<br />
<br />
There is a RepRap teardrop symbol in the file /usr/local/reprap-nnnnnn-yyyymmdd/reprap-icon.png which people can use if they add the program to their desktop or task-bar as a clickable executable. The program is /usr/local/bin/reprap .<br />
<br />
If you want to save space, you can now delete the distribution .zip file:<br />
<br />
<pre><br />
# rm /xxx/yyy/reprap-nnnnnn-yyyymmdd.zip<br />
</pre><br />
<br />
==Linux AMD64==<br />
<br />
The reprap software comes with rxtx and java3d binaries needed for 32bit arcitectures so getting the reprap software working on amd64 either means installing 32bit version of java or installing native 64bit versions of the libraries. For the latter option here is how you can set it up.<br />
<br />
For java3d its a simple these can simply be installed using<br />
sudo apt-get install libjava3d-jni<br />
For rxtx you can download binaries for the latest stable version [http://rxtx.qbang.org/pub/rxtx/rxtx-2.1-7-bins-r2.zip here] expand the zip using<br />
unzip Downloads/rxtx-2.1-7-bins-r2.zip<br />
copy the 64 bit binary to /usr/lib<br />
sudo cp rxtx-2.1-7-bins-r2/Linux/x86_64-unknown-linux-gnu/librxtxSerial.so /usr/lib<br />
Now all that has to be done is to soft link these libs to where the reprap software expects them to be<br />
cd reprap-mendel-20100105<br />
rm libj3dcore-ogl.so<br />
rm librxtxSerial.so<br />
ln -s /usr/lib/jni/libj3dcore-ogl.so<br />
ln -s /usr/lib/librxtxSerial.so<br />
<br />
[[User:GilesBathgate|GilesBathgate]] 10:50, 16 January 2010 (UTC)<br />
<br />
==Windows Installation==<br />
<br />
You will need administrator privileges to do this.<br />
<br />
Create a new folder:<br />
<br />
<pre><br />
C:\Program Files\Reprap<br />
</pre><br />
<br />
Unpack the ZIP file anywhere you like on your system. It will create a folder called reprap-nnnnnn-yyyymmdd where nnnnnn is the name of the current RepRap machine and yyyymmdd is the date of the release. Move all the files in that folder into C:\Program Files\Reprap. <br />
<br />
You can then delete the reprap-nnnnnn-yyyymmdd if you like, and the ZIP file.<br />
<br />
In C:\Program Files\Reprap there is a .BAT file called reprap.bat. Running that will launch the RepRap host software. You can copy that .BAT file to your desktop or elsewhere to give you a clickable executable.<br />
<br />
==Source Code==<br />
===Distribution Contents===<br />
<br />
Information on the files in the RepRap distribution are available at [[RepRap Distribution Files]].<br />
<br />
===Getting the latest sources===<br />
<br />
All the files for RepRap are kept in a [http://en.wikipedia.org/wiki/Subversion_(software) Subversion repository] on [http://en.wikipedia.org/wiki/SourceForge Sourceforge].<br />
<br />
You can use your web browser to [http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/ inspect and download individual files here].<br />
<br />
If you want to get the latest versions of files you can check them out of the repository. But take care - these files will be development versions that may have bugs.<br />
<br />
The simplest way to obtain the files is probably to use [http://en.wikipedia.org/wiki/Eclipse_(software) the Eclipse software development environment], which is used by all the RepRap hardware and software developers.<br />
<br />
Do the following:<br />
<br />
# Download and install [http://www.eclipse.org/ Eclipse from this link],<br />
# Download and install [http://subclipse.tigris.org/ Subclipse (that is, Subversion for Eclipse) from this link], and<br />
# Run Eclipse.<br />
<br />
In Eclipse go to the menu: '''<tt>Window -> Open Perspective -> Other...</tt>''' and you will get a menu containing (among other things) '''<tt>SVN Repository Exploring</tt>'''. Select that and click on OK. It should open a window called SVN Repository. Right mouse click in that window and select '''<tt>New -> Repository location</tt>'''. <br />
<br />
Copy and paste the RepRap repository URL: '''<tt>https://reprap.svn.sourceforge.net/svnroot/reprap/</tt>''' as the location.<br />
<br />
Open the repository (the little arrow at its left) and go down to '''<tt>trunk</tt>'''. Right-mouse-click on '''<tt>mendel</tt>''', and select '''<tt>Checkout...</tt>'''. This will give you all the mechanical and electronic design files, and the microcontroller firmware sources.<br />
<br />
Next go down to '''<tt>reprap</tt>''' and check out '''<tt>host</tt>''' (this is the Java software for the host computer).<br />
<br />
Note that you are downloading a lot of information (about 60M), so these will take quite a while on a slow connection.<br />
<br />
Now go back to the Java view in Eclipse (two little arrows: '''<tt>>></tt>''' top right) and you should have all the project's files.<br />
<br />
You can update any file or a whole folder full of files from the repository at any time by right-clicking on it and going to '''<tt>team -> update...</tt>'''<br />
<br />
To work with the Java source code you will need the system-dependent libraries that RepRap uses. Those are in the directory '''<tt>Reprap/lib/system-dependent/</tt>'''. You will need to copy (or create links to) the .so files (Linux) or the .dll files (Windows) in there to the place in the Java system where these are stored.<br />
<br />
==Alternatives==<br />
<br />
Alternative software packages are available to generate G Code and drive the Rep Rap. More information on these can be found on the [[Alternative Software]] page.<br />
<br />
<br />
[[Category:Программное обеспечение]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=%D0%9A%D0%BE%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%B8%D1%80%D0%BE%D0%B2%D0%B0%D0%BD%D0%B8%D0%B5_%D1%8D%D0%BB%D0%B5%D0%BA%D1%82%D1%80%D0%B8%D1%87%D0%B5%D1%81%D0%BA%D0%BE%D0%B9_%D1%87%D0%B0%D1%81%D1%82%D0%B8&diff=13941Конструирование электрической части2010-03-24T19:43:26Z<p>Senyor: </p>
<hr />
<div>{{Template:Mendel Documentation Header Ru}}<br />
{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}}<br />
<br />
[[Image:motherboard.jpg|thumb|300px|Motherboard]]<br />
<br />
These pages describe the standard RepRap electronics. You may also care to check out [[Pololu_Electronics|these provisional alternative designs]].<br />
<br />
If you buy the printed circuit boards for Mendel ready-made from [http://makerbot.com MakerBot Industries] you will get versions intended for their [http://store.makerbot.com/cupcake-cnc/cupcake-cnc-basic.html CupCake machine]. These can be used as they stand, but by making a few small changes to them (pliers, forceps, a small screwdriver, and a soldering iron are all that are needed) you can make the Mendel wiring a lot neater. Details of how to do these <br />
<br />
* [[PCB adaptions for Mendel |PCB adaptions for Mendel are here]].<br />
<br />
If you get kit boards or buy the bare PCBs and then get your own components to populate them you can build them for Mendel from the start, of course. Here are the instructions for building the kit boards yourself. One Mendel will need:<br />
<br />
* 1 [http://dev.www.reprap.org/bin/view/Main/Motherboard_1_2 RepRap Motherboard] (''mendel/electronics/motherboard'', [http://store.makerbot.com/electronics/pcbs/motherboard-v1-2.html buy PCB online]),<br />
* 1 [[Mendel USB and power connector]] (no Eagle design - it's a simple piece of stripboard),<br />
* 3 [http://dev.www.reprap.org/bin/view/Main/Stepper_Motor_Driver_2_3 RepRap Stepper drivers] (''mendel/electronics/stepper-motor-driver'', [http://store.makerbot.com/electronics/pcbs/stepper-motor-driver-v2-3-pcb.html buy PCB online]),<br />
* 3 [http://dev.www.reprap.org/bin/view/Main/OptoEndstop_2_1 RepRap Opto Endstops] (''mendel/electronics/opto-endstop'', [http://store.makerbot.com/electronics/pcbs/opto-endstop-v2-1.html buy PCB online]), and<br />
* As many [http://dev.www.reprap.org/bin/view/Main/Extruder_Controller_2_2 RepRap extruder controllers] as you have extruders (''mendel/electronics/extruder-controller'', [http://store.makerbot.com/electronics/pcbs/extruder-controller-v2-2-pcb.html buy PCB online]).<br />
<br />
The locations in your download that you made to [[Installing_RepRap_on_your_computer|install RepRap on your computer]] of the [http://www.cadsoft.de Eagle] design files for these circuit boards is given in brackets after the links.<br />
<br />
There is a [[Testing RepRap Electronics]] page at that link with details of how to test each board.<br />
<br />
<hr><br />
<br />
You may care also to see the experimental [[Pololu Electronics]] page.<br />
<hr><br />
<br />
Back to [[How to make RepRap Version II Mendel]].</div>Senyorhttps://reprap.org/mediawiki/index.php?title=%D0%9A%D0%BE%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%B8%D1%80%D0%BE%D0%B2%D0%B0%D0%BD%D0%B8%D0%B5_%D1%8D%D0%BB%D0%B5%D0%BA%D1%82%D1%80%D0%B8%D1%87%D0%B5%D1%81%D0%BA%D0%BE%D0%B9_%D1%87%D0%B0%D1%81%D1%82%D0%B8&diff=13940Конструирование электрической части2010-03-24T19:43:15Z<p>Senyor: </p>
<hr />
<div>{{Template:Mendel Documentation Header Ru}}<br />
<br />
{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}}<br />
<br />
[[Image:motherboard.jpg|thumb|300px|Motherboard]]<br />
<br />
These pages describe the standard RepRap electronics. You may also care to check out [[Pololu_Electronics|these provisional alternative designs]].<br />
<br />
If you buy the printed circuit boards for Mendel ready-made from [http://makerbot.com MakerBot Industries] you will get versions intended for their [http://store.makerbot.com/cupcake-cnc/cupcake-cnc-basic.html CupCake machine]. These can be used as they stand, but by making a few small changes to them (pliers, forceps, a small screwdriver, and a soldering iron are all that are needed) you can make the Mendel wiring a lot neater. Details of how to do these <br />
<br />
* [[PCB adaptions for Mendel |PCB adaptions for Mendel are here]].<br />
<br />
If you get kit boards or buy the bare PCBs and then get your own components to populate them you can build them for Mendel from the start, of course. Here are the instructions for building the kit boards yourself. One Mendel will need:<br />
<br />
* 1 [http://dev.www.reprap.org/bin/view/Main/Motherboard_1_2 RepRap Motherboard] (''mendel/electronics/motherboard'', [http://store.makerbot.com/electronics/pcbs/motherboard-v1-2.html buy PCB online]),<br />
* 1 [[Mendel USB and power connector]] (no Eagle design - it's a simple piece of stripboard),<br />
* 3 [http://dev.www.reprap.org/bin/view/Main/Stepper_Motor_Driver_2_3 RepRap Stepper drivers] (''mendel/electronics/stepper-motor-driver'', [http://store.makerbot.com/electronics/pcbs/stepper-motor-driver-v2-3-pcb.html buy PCB online]),<br />
* 3 [http://dev.www.reprap.org/bin/view/Main/OptoEndstop_2_1 RepRap Opto Endstops] (''mendel/electronics/opto-endstop'', [http://store.makerbot.com/electronics/pcbs/opto-endstop-v2-1.html buy PCB online]), and<br />
* As many [http://dev.www.reprap.org/bin/view/Main/Extruder_Controller_2_2 RepRap extruder controllers] as you have extruders (''mendel/electronics/extruder-controller'', [http://store.makerbot.com/electronics/pcbs/extruder-controller-v2-2-pcb.html buy PCB online]).<br />
<br />
The locations in your download that you made to [[Installing_RepRap_on_your_computer|install RepRap on your computer]] of the [http://www.cadsoft.de Eagle] design files for these circuit boards is given in brackets after the links.<br />
<br />
There is a [[Testing RepRap Electronics]] page at that link with details of how to test each board.<br />
<br />
<hr><br />
<br />
You may care also to see the experimental [[Pololu Electronics]] page.<br />
<hr><br />
<br />
Back to [[How to make RepRap Version II Mendel]].</div>Senyorhttps://reprap.org/mediawiki/index.php?title=%D0%9A%D0%BE%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%B8%D1%80%D0%BE%D0%B2%D0%B0%D0%BD%D0%B8%D0%B5_%D1%8D%D0%BB%D0%B5%D0%BA%D1%82%D1%80%D0%B8%D1%87%D0%B5%D1%81%D0%BA%D0%BE%D0%B9_%D1%87%D0%B0%D1%81%D1%82%D0%B8&diff=13939Конструирование электрической части2010-03-24T19:42:31Z<p>Senyor: </p>
<hr />
<div>{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}}<br />
<br />
<br />
{{Template:Mendel Documentation Header Ru}}<br />
<br />
[[Image:motherboard.jpg|thumb|300px|Motherboard]]<br />
<br />
These pages describe the standard RepRap electronics. You may also care to check out [[Pololu_Electronics|these provisional alternative designs]].<br />
<br />
If you buy the printed circuit boards for Mendel ready-made from [http://makerbot.com MakerBot Industries] you will get versions intended for their [http://store.makerbot.com/cupcake-cnc/cupcake-cnc-basic.html CupCake machine]. These can be used as they stand, but by making a few small changes to them (pliers, forceps, a small screwdriver, and a soldering iron are all that are needed) you can make the Mendel wiring a lot neater. Details of how to do these <br />
<br />
* [[PCB adaptions for Mendel |PCB adaptions for Mendel are here]].<br />
<br />
If you get kit boards or buy the bare PCBs and then get your own components to populate them you can build them for Mendel from the start, of course. Here are the instructions for building the kit boards yourself. One Mendel will need:<br />
<br />
* 1 [http://dev.www.reprap.org/bin/view/Main/Motherboard_1_2 RepRap Motherboard] (''mendel/electronics/motherboard'', [http://store.makerbot.com/electronics/pcbs/motherboard-v1-2.html buy PCB online]),<br />
* 1 [[Mendel USB and power connector]] (no Eagle design - it's a simple piece of stripboard),<br />
* 3 [http://dev.www.reprap.org/bin/view/Main/Stepper_Motor_Driver_2_3 RepRap Stepper drivers] (''mendel/electronics/stepper-motor-driver'', [http://store.makerbot.com/electronics/pcbs/stepper-motor-driver-v2-3-pcb.html buy PCB online]),<br />
* 3 [http://dev.www.reprap.org/bin/view/Main/OptoEndstop_2_1 RepRap Opto Endstops] (''mendel/electronics/opto-endstop'', [http://store.makerbot.com/electronics/pcbs/opto-endstop-v2-1.html buy PCB online]), and<br />
* As many [http://dev.www.reprap.org/bin/view/Main/Extruder_Controller_2_2 RepRap extruder controllers] as you have extruders (''mendel/electronics/extruder-controller'', [http://store.makerbot.com/electronics/pcbs/extruder-controller-v2-2-pcb.html buy PCB online]).<br />
<br />
The locations in your download that you made to [[Installing_RepRap_on_your_computer|install RepRap on your computer]] of the [http://www.cadsoft.de Eagle] design files for these circuit boards is given in brackets after the links.<br />
<br />
There is a [[Testing RepRap Electronics]] page at that link with details of how to test each board.<br />
<br />
<hr><br />
<br />
You may care also to see the experimental [[Pololu Electronics]] page.<br />
<hr><br />
<br />
Back to [[How to make RepRap Version II Mendel]].</div>Senyorhttps://reprap.org/mediawiki/index.php?title=%D0%A3%D1%81%D1%82%D0%B0%D0%BD%D0%BE%D0%B2%D0%BA%D0%B0_%D0%9F%D0%9E_RepRap_%D0%BD%D0%B0_%D0%BA%D0%BE%D0%BC%D0%BF%D1%8C%D1%8E%D1%82%D0%B5%D1%80%D0%B5&diff=13938Установка ПО RepRap на компьютере2010-03-24T19:41:58Z<p>Senyor: </p>
<hr />
<div>{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}}<br />
<br />
{{Template:Mendel Documentation Header Ru}}<br />
<br />
{|-<br />
[[Image:material-select.png|600px|right]]<br />
|<br />
{{Alternative Toolchain Notice|software|install}}<br />
<br />
<br />
__TOC__<br />
|}<br />
<br style="clear:both;"/><br />
<br />
==Prerequisites==<br />
<br />
The RepRap software currently runs under 32-bit Linux or Microsoft Windows. We are working on adding Mac and 64-bit versions.<br />
<br />
You will need Java on your computer. If you don't have it already, get it here: <br />
<br />
* [http://java.com/ http://java.com/]<br />
<br />
The Host software is still a little buggy on Windows with Java 6 installed, if you encounter any problems with Java 6 and the software, try uninstalling Java 6 and install the latest Java 5 runtime from:<br />
<br />
* [http://java.sun.com/products/archive/ http://java.sun.com/products/archive/]<br />
<br />
You will also need to download and install the Arduino development environment to build the firmware for your RepRap machine. That is available here:<br />
<br />
* [http://arduino.cc/ http://arduino.cc/]<br />
<br />
You will need to download and install the Sanguino add-ons for Arduino. Get them here:<br />
<br />
* [http://sanguino.cc/ http://sanguino.cc/]<br />
<br />
Finally in this section, you may care to take a look at software that is useful for RepRap, but not required to run it. There's a list here:<br />
<br />
* [[Useful Software Packages]]<br />
<br />
==Download==<br />
<br />
Download the RepRap distribution from Sourceforge:<br />
<br />
[http://sourceforge.net/projects/reprap/ http://sourceforge.net/projects/reprap/]<br />
<br />
There are a number of files and packages from the project available there, but the main download (which is about 65 MB) will have a name like reprap-nnnnnn-yyyymmdd.zip. This is the one file you want. It is the main Sourceforge download for RepRap; nnnnnn is the name of the current RepRap machine and yyyymmdd is the date of the release. <br />
<br />
==Linux Installation==<br />
<br />
You can install and use RepRap in your own file-space under Linux. <br />
<br />
===In your own space===<br />
<br />
Unzip the downloaded file:<br />
<br />
<pre><br />
$ unzip reprap-nnnnnn-yyyymmdd.zip<br />
</pre><br />
<br />
This will create a directory called reprap-nnnnnn-yyyymmdd (with the name of the current RepRap machine and the distribution date substituted, clearly). To run the RepRap software simply move to that directory and run the file named reprap:<br />
<br />
<pre><br />
$ cd reprap-nnnnnn-yyyymmdd<br />
$ ./reprap<br />
</pre><br />
<br />
===Installing for all users===<br />
<br />
If you want RepRap to be available system-wide to all users, you will need to log in as the superuser to install it.<br />
<br />
Assume you downloaded reprap-nnnnnn-yyyymmdd.zip into the directory /xxx/yyy. Move to the directory /usr/local, then unpack it:<br />
<br />
<pre><br />
# cd /usr/local<br />
# unzip /xxx/yyy/reprap-nnnnnn-yyyymmdd.zip<br />
</pre><br />
<br />
Then move to the /usr/local/bin directory and create a short shell script called reprap using your favourite text editor (gedit in the example).<br />
<br />
<pre><br />
# cd /usr/local/bin<br />
# gedit reprap<br />
</pre><br />
<br />
Copy and paste these three lines into the script, then save it:<br />
<br />
<pre><br />
#!/bin/sh<br />
cd /usr/local/reprap-nnnnnn-yyyymmdd<br />
./reprap<br />
</pre><br />
<br />
(Don't forget to replace the nnnnnn and the yyyymmdd with the right strings for your distribution file.)<br />
<br />
Finally, set execute permission on the file:<br />
<br />
<pre><br />
# chmod 755 reprap<br />
</pre><br />
<br />
Any user will now be able to run the software just by typing the command "reprap".<br />
<br />
There is a RepRap teardrop symbol in the file /usr/local/reprap-nnnnnn-yyyymmdd/reprap-icon.png which people can use if they add the program to their desktop or task-bar as a clickable executable. The program is /usr/local/bin/reprap .<br />
<br />
If you want to save space, you can now delete the distribution .zip file:<br />
<br />
<pre><br />
# rm /xxx/yyy/reprap-nnnnnn-yyyymmdd.zip<br />
</pre><br />
<br />
==Linux AMD64==<br />
<br />
The reprap software comes with rxtx and java3d binaries needed for 32bit arcitectures so getting the reprap software working on amd64 either means installing 32bit version of java or installing native 64bit versions of the libraries. For the latter option here is how you can set it up.<br />
<br />
For java3d its a simple these can simply be installed using<br />
sudo apt-get install libjava3d-jni<br />
For rxtx you can download binaries for the latest stable version [http://rxtx.qbang.org/pub/rxtx/rxtx-2.1-7-bins-r2.zip here] expand the zip using<br />
unzip Downloads/rxtx-2.1-7-bins-r2.zip<br />
copy the 64 bit binary to /usr/lib<br />
sudo cp rxtx-2.1-7-bins-r2/Linux/x86_64-unknown-linux-gnu/librxtxSerial.so /usr/lib<br />
Now all that has to be done is to soft link these libs to where the reprap software expects them to be<br />
cd reprap-mendel-20100105<br />
rm libj3dcore-ogl.so<br />
rm librxtxSerial.so<br />
ln -s /usr/lib/jni/libj3dcore-ogl.so<br />
ln -s /usr/lib/librxtxSerial.so<br />
<br />
[[User:GilesBathgate|GilesBathgate]] 10:50, 16 January 2010 (UTC)<br />
<br />
==Windows Installation==<br />
<br />
You will need administrator privileges to do this.<br />
<br />
Create a new folder:<br />
<br />
<pre><br />
C:\Program Files\Reprap<br />
</pre><br />
<br />
Unpack the ZIP file anywhere you like on your system. It will create a folder called reprap-nnnnnn-yyyymmdd where nnnnnn is the name of the current RepRap machine and yyyymmdd is the date of the release. Move all the files in that folder into C:\Program Files\Reprap. <br />
<br />
You can then delete the reprap-nnnnnn-yyyymmdd if you like, and the ZIP file.<br />
<br />
In C:\Program Files\Reprap there is a .BAT file called reprap.bat. Running that will launch the RepRap host software. You can copy that .BAT file to your desktop or elsewhere to give you a clickable executable.<br />
<br />
==Source Code==<br />
===Distribution Contents===<br />
<br />
Information on the files in the RepRap distribution are available at [[RepRap Distribution Files]].<br />
<br />
===Getting the latest sources===<br />
<br />
All the files for RepRap are kept in a [http://en.wikipedia.org/wiki/Subversion_(software) Subversion repository] on [http://en.wikipedia.org/wiki/SourceForge Sourceforge].<br />
<br />
You can use your web browser to [http://reprap.svn.sourceforge.net/viewvc/reprap/trunk/ inspect and download individual files here].<br />
<br />
If you want to get the latest versions of files you can check them out of the repository. But take care - these files will be development versions that may have bugs.<br />
<br />
The simplest way to obtain the files is probably to use [http://en.wikipedia.org/wiki/Eclipse_(software) the Eclipse software development environment], which is used by all the RepRap hardware and software developers.<br />
<br />
Do the following:<br />
<br />
# Download and install [http://www.eclipse.org/ Eclipse from this link],<br />
# Download and install [http://subclipse.tigris.org/ Subclipse (that is, Subversion for Eclipse) from this link], and<br />
# Run Eclipse.<br />
<br />
In Eclipse go to the menu: '''<tt>Window -> Open Perspective -> Other...</tt>''' and you will get a menu containing (among other things) '''<tt>SVN Repository Exploring</tt>'''. Select that and click on OK. It should open a window called SVN Repository. Right mouse click in that window and select '''<tt>New -> Repository location</tt>'''. <br />
<br />
Copy and paste the RepRap repository URL: '''<tt>https://reprap.svn.sourceforge.net/svnroot/reprap/</tt>''' as the location.<br />
<br />
Open the repository (the little arrow at its left) and go down to '''<tt>trunk</tt>'''. Right-mouse-click on '''<tt>mendel</tt>''', and select '''<tt>Checkout...</tt>'''. This will give you all the mechanical and electronic design files, and the microcontroller firmware sources.<br />
<br />
Next go down to '''<tt>reprap</tt>''' and check out '''<tt>host</tt>''' (this is the Java software for the host computer).<br />
<br />
Note that you are downloading a lot of information (about 60M), so these will take quite a while on a slow connection.<br />
<br />
Now go back to the Java view in Eclipse (two little arrows: '''<tt>>></tt>''' top right) and you should have all the project's files.<br />
<br />
You can update any file or a whole folder full of files from the repository at any time by right-clicking on it and going to '''<tt>team -> update...</tt>'''<br />
<br />
To work with the Java source code you will need the system-dependent libraries that RepRap uses. Those are in the directory '''<tt>Reprap/lib/system-dependent/</tt>'''. You will need to copy (or create links to) the .so files (Linux) or the .dll files (Windows) in there to the place in the Java system where these are stored.<br />
<br />
==Alternatives==<br />
<br />
Alternative software packages are available to generate G Code and drive the Rep Rap. More information on these can be found on the [[Alternative Software]] page.<br />
<br />
<br />
[[Category:Программное обеспечение]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D0%BF%D0%BE%D0%BA%D1%83%D0%BF%D0%BA%D0%B5&diff=13937RepRap II "Мендель" Инструкция по покупке2010-03-24T19:41:23Z<p>Senyor: /* Электрические */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
Документация по созданию RepRap II "Мендель" доступна каждому (открыта и предоставляется безвозмездно), поэтому нельзя однозначно сказать, где машину можно приобрести. Поэтому существует множество вариантов. Поскольку машина все время улучшается, цены на изготовление снижаются. Далее в списке Вы можете найти места, где приобрести отдельные части и/или наборы для изготовления "Менделя".<br />
<br />
Список доступных в настоящее время компонентов "Менделя" и поставщиков доступен [[Mendel_assembly_data_sheet |по этой ссылке]]. <br />
<br />
'''Заметка:''' Не обязательно приобретать набор, многие [[:Category:Mendel RepStrap|RepStrap'ы]] Вы можете купить или изготовить из уже имеющихся у Вас в наличии инструментов и материалов.<br />
<br />
==Форум Продаж==<br />
<br />
Мы поддерживаем форум [http://dev.forums.reprap.org/index.php?93 Форум "Продается/Разыскивается" (на англ.)], на котором люди, имеющие наборы компонентов RepRap могут могут размещать объявления о продаже. А те, кто хочет приобрести, размещают запросы на покупку. ''Caveat emptor'' - мы пытаемся оградить Вас от влияния мошенников, однако форум открыт для всех желающих. Не пересылайте деньги, пока Вы не удостоверитесь в благонадежности адресата.<br />
<br />
==Полностью собранные наборы RapRap II "Мендель"==<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
==Mendel Parts Kits==<br />
===Полные наборы===<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
===Электронные и механические наборы/запчасти===<br />
* [http://makerbot.com/ Makerbot] - продажа полностью собранных/наборов запчастей/наборов печатных плат для третьего поколения электроники RepRap и пластиковых частей.<br />
* [http://www.bitsfrombytes.com/ Bits from Bytes] - продажа пластиковой проволоки и альтернативной (не стандарта RepRap) электроники.<br />
* [http://www.reprapsource.com/ RepRap Source] - продажа пластиковой проволоки, печатных плат прошлых поколений и механических частей.<br />
* [http://www.iprint3d.org/ iPrint3D] - продажа третьего поколения электроники RepRap.<br />
<br />
* [http://parts.reprap.org/ RepRap Parts Lister] - генерация списка для заказа в двух различных магазинах. В настоящее время ограничено третьим поколением электроники RepRap.<br />
<br />
===Пластиковые запчасти, изготовленные на RepRap===<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
==Поставщики отдельных комплектующих "Менделя"==<br />
<br />
*[[Поставщики/Шаговые Двигатели]]<br />
<br />
===Электрические===<br />
* [http://www.digikey.com/ digikey США] - '''(Интернет-магазин)'''<br />
* [http://www.digikey.ca/ digikey Канада] - '''Канада (Интернет-магазин)'''<br />
* [http://mouser.com Mouser (рус./англ.)] - '''Интернет-магазин'''<br />
<br />
===Механичесике===<br />
* [http://www.mcmaster.com/ McMaster-Carr] - '''осуществляет поставки только на территории США (Интернет-магазин)''' - здесь есть все не воспроизводимые с помощью RepRap механические комплектующие для "Менделя".<br />
* [http://www.fastenal.com/web/home.ex Fastenal] - '''Канада и США (магазин/Интернет-магазин)''' - поставляет все не воспроизводимые с помощью RepRap механические комплектующие, за исключением ремней двигателей.<br />
* [http://www.sdp-si.com/web/html/products.htm SDP/SI] - '''Канада (Интернет-магазин)''' - поставляет все не воспроизводимые с помощью RepRap механические комплектующие (возможно, не все), всключая ремни двигателей.<br />
<br />
==Поставщики расходных материалов для печати==<br />
Для ознакомления с поставщиками ABS/PLA/и т.д. смотрите [[Материалы Печати|Поставщики расходных материалов для печати]]<br />
<br />
==Форум для тех, кто продает/хочет купить RepRap==<br />
* Комплектующие RepRap также возможно приобрести по адресу [http://forums.reprap.org/list.php?94 RepRap For-Sale Forum (на англ.)]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D0%BF%D0%BE%D0%BA%D1%83%D0%BF%D0%BA%D0%B5&diff=13936RepRap II "Мендель" Инструкция по покупке2010-03-24T19:40:57Z<p>Senyor: /* Электрические */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
Документация по созданию RepRap II "Мендель" доступна каждому (открыта и предоставляется безвозмездно), поэтому нельзя однозначно сказать, где машину можно приобрести. Поэтому существует множество вариантов. Поскольку машина все время улучшается, цены на изготовление снижаются. Далее в списке Вы можете найти места, где приобрести отдельные части и/или наборы для изготовления "Менделя".<br />
<br />
Список доступных в настоящее время компонентов "Менделя" и поставщиков доступен [[Mendel_assembly_data_sheet |по этой ссылке]]. <br />
<br />
'''Заметка:''' Не обязательно приобретать набор, многие [[:Category:Mendel RepStrap|RepStrap'ы]] Вы можете купить или изготовить из уже имеющихся у Вас в наличии инструментов и материалов.<br />
<br />
==Форум Продаж==<br />
<br />
Мы поддерживаем форум [http://dev.forums.reprap.org/index.php?93 Форум "Продается/Разыскивается" (на англ.)], на котором люди, имеющие наборы компонентов RepRap могут могут размещать объявления о продаже. А те, кто хочет приобрести, размещают запросы на покупку. ''Caveat emptor'' - мы пытаемся оградить Вас от влияния мошенников, однако форум открыт для всех желающих. Не пересылайте деньги, пока Вы не удостоверитесь в благонадежности адресата.<br />
<br />
==Полностью собранные наборы RapRap II "Мендель"==<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
==Mendel Parts Kits==<br />
===Полные наборы===<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
===Электронные и механические наборы/запчасти===<br />
* [http://makerbot.com/ Makerbot] - продажа полностью собранных/наборов запчастей/наборов печатных плат для третьего поколения электроники RepRap и пластиковых частей.<br />
* [http://www.bitsfrombytes.com/ Bits from Bytes] - продажа пластиковой проволоки и альтернативной (не стандарта RepRap) электроники.<br />
* [http://www.reprapsource.com/ RepRap Source] - продажа пластиковой проволоки, печатных плат прошлых поколений и механических частей.<br />
* [http://www.iprint3d.org/ iPrint3D] - продажа третьего поколения электроники RepRap.<br />
<br />
* [http://parts.reprap.org/ RepRap Parts Lister] - генерация списка для заказа в двух различных магазинах. В настоящее время ограничено третьим поколением электроники RepRap.<br />
<br />
===Пластиковые запчасти, изготовленные на RepRap===<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
==Поставщики отдельных комплектующих "Менделя"==<br />
<br />
*[[Поставщики/Шаговые Двигатели]]<br />
<br />
===Электрические===<br />
* [http://www.digikey.com/ digikey US] - '''(Интернет-магазин)'''<br />
* [http://www.digikey.ca/ digikey Canada] - '''Канада (Интернет-магазин)'''<br />
* [http://mouser.com Mouser (рус./англ.)] - '''Интернет-магазин'''<br />
<br />
===Механичесике===<br />
* [http://www.mcmaster.com/ McMaster-Carr] - '''осуществляет поставки только на территории США (Интернет-магазин)''' - здесь есть все не воспроизводимые с помощью RepRap механические комплектующие для "Менделя".<br />
* [http://www.fastenal.com/web/home.ex Fastenal] - '''Канада и США (магазин/Интернет-магазин)''' - поставляет все не воспроизводимые с помощью RepRap механические комплектующие, за исключением ремней двигателей.<br />
* [http://www.sdp-si.com/web/html/products.htm SDP/SI] - '''Канада (Интернет-магазин)''' - поставляет все не воспроизводимые с помощью RepRap механические комплектующие (возможно, не все), всключая ремни двигателей.<br />
<br />
==Поставщики расходных материалов для печати==<br />
Для ознакомления с поставщиками ABS/PLA/и т.д. смотрите [[Материалы Печати|Поставщики расходных материалов для печати]]<br />
<br />
==Форум для тех, кто продает/хочет купить RepRap==<br />
* Комплектующие RepRap также возможно приобрести по адресу [http://forums.reprap.org/list.php?94 RepRap For-Sale Forum (на англ.)]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=%D0%9C%D0%B0%D1%82%D0%B5%D1%80%D0%B8%D0%B0%D0%BB%D1%8B_%D0%9F%D0%B5%D1%87%D0%B0%D1%82%D0%B8&diff=13935Материалы Печати2010-03-24T19:40:01Z<p>Senyor: Created page with '{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}} …'</p>
<hr />
<div>{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}}<br />
=Filament=<br />
<br />
Below is a table listing suppliers of filament. Costs are only approximate and are likely to change. Always check before ordering, and if you can, update this page. Please keep the tables in alphabetical order. If there are any missing fields in the table, please feel free to update.<br />
<br />
==3mm diameter filament==<br />
<br />
{|class="sortable"<br />
|+ ''3mm dia filament''<br />
|-<br />
! Vendor (with link) !! Shipping location !! Material(s) !! Approximate costs !! Additional notes<br />
|-<br />
| [http://www.bitsfrombytes.com/index.php?keyword=spool&Search=Search&Itemid=1&option=com_virtuemart&page=shop.browse BitsFromBytes] || From UK || [[ABS]], [[HDPE]], [[LDPE]], [[PLA]], [[PP]], [[uPVC]] || Varies but usually £40-45 in 1kg or 2kg rolls depending on material || None<br />
|-<br />
| [http://store.makerbot.com/plastic.html Makerbot] || From US || [[ABS]], [[PLA]] || USD $50-80 / 5lb || None<br />
|-<br />
| [http://www.makergear.com/products/filament MakerGear] || From US || [[ABS]], [[PLA]] || USD $15 / 1lb (sold in 1lb lots)|| None<br />
|-<br />
| [http://reprapsource.com/en/shop/list/198 RepRapSource] || From Germany || [[ABS]] || 99€ / 5kg || None<br />
|-<br />
| [https://kd85.com/makerbot.html Wim-kd85.com] || From Belgium (EU) || [[ABS]], [[PLA]] || 35€ to 75 / 5kg rolls depending on the material || None<br />
|-<br />
| [http://ultimachine.com/category/catalog/print-materials UltiMachine] || From US || [[PLA]]|| USD $45-60 || None<br />
|-<br />
| [[VikOlliver]] || From NZ || [[PLA]] ||NZD $25 per 100 metre (0.9kg) roll, NZD $20 shipping per roll to Europe/US || Contact vik [at] diamondage.co.nz<br />
|-<br />
| [http://www.plasticweldingrod.com/ New Image Plastics] || From US || [[ABS]], [[PVC]], [[HDPE]], working on [[PLA]] || ABS USD 8 per lb, min 10lb order || phone 330-854-3010<br />
|}</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D0%BF%D0%BE%D0%BA%D1%83%D0%BF%D0%BA%D0%B5&diff=13934RepRap II "Мендель" Инструкция по покупке2010-03-24T19:38:54Z<p>Senyor: /* Форум Продаж */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
Документация по созданию RepRap II "Мендель" доступна каждому (открыта и предоставляется безвозмездно), поэтому нельзя однозначно сказать, где машину можно приобрести. Поэтому существует множество вариантов. Поскольку машина все время улучшается, цены на изготовление снижаются. Далее в списке Вы можете найти места, где приобрести отдельные части и/или наборы для изготовления "Менделя".<br />
<br />
Список доступных в настоящее время компонентов "Менделя" и поставщиков доступен [[Mendel_assembly_data_sheet |по этой ссылке]]. <br />
<br />
'''Заметка:''' Не обязательно приобретать набор, многие [[:Category:Mendel RepStrap|RepStrap'ы]] Вы можете купить или изготовить из уже имеющихся у Вас в наличии инструментов и материалов.<br />
<br />
==Форум Продаж==<br />
<br />
Мы поддерживаем форум [http://dev.forums.reprap.org/index.php?93 Форум "Продается/Разыскивается" (на англ.)], на котором люди, имеющие наборы компонентов RepRap могут могут размещать объявления о продаже. А те, кто хочет приобрести, размещают запросы на покупку. ''Caveat emptor'' - мы пытаемся оградить Вас от влияния мошенников, однако форум открыт для всех желающих. Не пересылайте деньги, пока Вы не удостоверитесь в благонадежности адресата.<br />
<br />
==Полностью собранные наборы RapRap II "Мендель"==<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
==Mendel Parts Kits==<br />
===Полные наборы===<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
===Электронные и механические наборы/запчасти===<br />
* [http://makerbot.com/ Makerbot] - продажа полностью собранных/наборов запчастей/наборов печатных плат для третьего поколения электроники RepRap и пластиковых частей.<br />
* [http://www.bitsfrombytes.com/ Bits from Bytes] - продажа пластиковой проволоки и альтернативной (не стандарта RepRap) электроники.<br />
* [http://www.reprapsource.com/ RepRap Source] - продажа пластиковой проволоки, печатных плат прошлых поколений и механических частей.<br />
* [http://www.iprint3d.org/ iPrint3D] - продажа третьего поколения электроники RepRap.<br />
<br />
* [http://parts.reprap.org/ RepRap Parts Lister] - генерация списка для заказа в двух различных магазинах. В настоящее время ограничено третьим поколением электроники RepRap.<br />
<br />
===Пластиковые запчасти, изготовленные на RepRap===<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
==Поставщики отдельных комплектующих "Менделя"==<br />
<br />
*[[Поставщики/Шаговые Двигатели]]<br />
<br />
===Электрические===<br />
* [http://www.digikey.com/ digikey US] - '''(Интернет-магазин)'''<br />
* [http://www.digikey.ca/ digikey Canada] - '''Канада (Интернет-магазин)'''<br />
* [http://mouser.com Mouser] - '''Интернет-магазин''' (русский/английский)<br />
<br />
===Механичесике===<br />
* [http://www.mcmaster.com/ McMaster-Carr] - '''осуществляет поставки только на территории США (Интернет-магазин)''' - здесь есть все не воспроизводимые с помощью RepRap механические комплектующие для "Менделя".<br />
* [http://www.fastenal.com/web/home.ex Fastenal] - '''Канада и США (магазин/Интернет-магазин)''' - поставляет все не воспроизводимые с помощью RepRap механические комплектующие, за исключением ремней двигателей.<br />
* [http://www.sdp-si.com/web/html/products.htm SDP/SI] - '''Канада (Интернет-магазин)''' - поставляет все не воспроизводимые с помощью RepRap механические комплектующие (возможно, не все), всключая ремни двигателей.<br />
<br />
==Поставщики расходных материалов для печати==<br />
Для ознакомления с поставщиками ABS/PLA/и т.д. смотрите [[Материалы Печати|Поставщики расходных материалов для печати]]<br />
<br />
==Форум для тех, кто продает/хочет купить RepRap==<br />
* Комплектующие RepRap также возможно приобрести по адресу [http://forums.reprap.org/list.php?94 RepRap For-Sale Forum (на англ.)]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=%D0%9F%D0%BE%D1%81%D1%82%D0%B0%D0%B2%D1%89%D0%B8%D0%BA%D0%B8/%D0%A8%D0%B0%D0%B3%D0%BE%D0%B2%D1%8B%D0%B5_%D0%94%D0%B2%D0%B8%D0%B3%D0%B0%D1%82%D0%B5%D0%BB%D0%B8&diff=13933Поставщики/Шаговые Двигатели2010-03-24T19:37:38Z<p>Senyor: Created page with '{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}} …'</p>
<hr />
<div>{{notice|Это не законченный перевод статьи. Пожалуйста, сделайте свой вклад в перевод документации.}}<br />
If going for the smaller NEMA 14 motors, aim for the high torque option. You need approximately 1400 g.cm of holding torque or more to be safe. NEMA 14s are neater, lighter and smaller, but can be hard to get hold of. NEMA 17s are quite easy to get in the specification that Mendel needs, but are bulkier and less neat. NEMA 14s are running near the edge of their envelope: they will get warm. NEMA 17s are well inside what they can do, and will run cool.<br />
<br />
Below is a list of possible suppliers and motors. Please add to it. If you have built a Mendel successfully with a given motor, remember to put '''Yes''' in the tested field.<br />
{| class="wikitable sortable" border="1"<br />
|+ ''Stepper Motors''<br />
|-<br />
| Vendor (with link) || Shipping location || Manufacturer || Model # || Datasheet || NEMA (Size) || Torque || Shaft || Tested || Additional notes<br />
|-<br />
| [http://www.motioncontrolproducts.com/ Motion Control Products] || Unknown || Unknown || FL35ST36-1004B || [http://reprap.org/mediawiki/images/a/af/NEMA14-high-torque.pdf FL35ST36-1004B Datasheet] || 14 || . || . || Yes || Used in mendel prototype<br />
|-<br />
| [http://www.active-robots.com/ Active Robots] || UK || Wantai/Phidget (?) || [http://www.phidgets.com/products.php?category=23&product_id=3301 Phidget 3301] || [http://www.phidgets.com/documentation/Phidgets/3301Datasheet.pdf 3301 Datasheet] || 14 || ?? || 4.9mm || Yes || None<br />
|-<br />
| [http://www.slidesandballscrews.com/sy42sth471684b-p-255.html?cPath=45_80&osCsid=7ce942c7d5e8e750e51932c54d3f9c8b Zapp Automation] || Unknown || Unknown || SY42STH47-1684B || [http://www.slidesandballscrews.com/pdf/steppermotors/SY42STH47-1684B.pdf SY42STH47-1684B Datasheet] || 17 || . || . || Yes || None<br />
|-<br />
| [http://www.interinar.com/step-motors.html Interinar Electronics, LLC] || US || Oriental Motors || [http://www.interinar.com/vexta-px243m-01aa.html Vexta PX243M-01AA] || [http://www.interinar.com/public_docs/PX243M-01AA.pdf PX243M-01AA Datasheet] || 17 || . || . || Unknown || Not strong enough for direct drive extruder, Uses Imperial #4-40 TPI mounting holes instead of M3 metric, Link seems dead 24/Mar/2010<br />
|-<br />
| [http://www.alltronics.com/cgi-bin/category.cgi?category=55 Alltronics.com] || US || Lin Engineering || [http://www.alltronics.com/cgi-bin/item/28M035/search/Lin-Engineering-4218L-01-10-bipolar-stepper-motor 4218L-01-10] || [http://www.alltronics.com/mas_assets/acrobat/28M035.pdf 4218L-01-10 Datasheet] || 17 || ~53 Ncm || 3/16 inch = 4.7625 mm (Round) || Unknown || None<br />
|-<br />
| [http://www.alltronics.com/cgi-bin/category.cgi?category=55 Alltronics.com] || US || Lin Engineering || [http://www.alltronics.com/cgi-bin/item/24M014/search/Lin-Engineering-Nema-17-1.8deg-24V-2A-bipolar-stepper-motor 4218L-01-11] || [http://www.alltronics.com/mas_assets/acrobat/24M014.pdf 4218L-01-11 Datasheet] || 17 (?) || ~53 Ncm || ~5 mm = 0.1968 inches (D-Shape) || Yes || None<br />
|-<br />
| [http://www.phidgets.com/products.php?category=23 Phidgets.com] || US || Wantai/Phidgets(?) || [http://www.phidgets.com/products.php?category=23&product_id=3303 Wantai 42BYGHW811] || [http://www.phidgets.com/documentation/Phidgets/3303Datasheet.pdf 3303 Datasheet] || 17 || . || 4.9mm || Unknown || None<br />
|-<br />
| [http://www.robotgear.com.au Robot Gear] || AU || Mercury Motor || SM-42BYG011-25 || [http://www.robotgear.com.au/Cache/Files/Files/118_Stepper%20Motor%20Datasheet%20SM-42BYG011-25.pdf SM-42BYG011 Datasheet] || 17 || . || 5mm || No || None<br />
|}</div>Senyorhttps://reprap.org/mediawiki/index.php?title=Category:RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%A0%D0%B0%D0%B7%D1%80%D0%B0%D0%B1%D0%BE%D1%82%D0%BA%D0%B0&diff=13932Category:RepRap II "Мендель" Разработка2010-03-24T19:34:25Z<p>Senyor: </p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
Эта категория содержит все разделы, имеющие отношение к [[RepRap II "Мендель"]].<br />
<br />
RepRap также зависит от разработок пользователей, поэтому обязательно добавляйте Ваши усовершенствования сюда! <br />
<br />
Множество усовершенствований "Менделя" можно посмотреть здесь [http://www.thingiverse.com/tag:mendel Thingiverse (на англ.)].<br />
[[Category:Разработка]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=Category:RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%A0%D0%B0%D0%B7%D1%80%D0%B0%D0%B1%D0%BE%D1%82%D0%BA%D0%B0&diff=13931Category:RepRap II "Мендель" Разработка2010-03-24T19:32:23Z<p>Senyor: </p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
Эта категория содержит все разделы, имеющие отношение к [[RepRap II "Мендель"]].<br />
<br />
RepRap также зависит от разработок пользователей, поэтому обязательно добавляйте Ваши усовершенствования сюда! <br />
<br />
Множество усовершенствований "Менделя" можно посмотреть здесь [http://www.thingiverse.com/tag:Thingiverse (на англ.)].<br />
[[Category:Разработка]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D1%8D%D0%BA%D1%81%D0%BF%D0%BB%D1%83%D0%B0%D1%82%D0%B0%D1%86%D0%B8%D0%B8&diff=13930RepRap II "Мендель" Инструкция по эксплуатации2010-03-24T19:27:42Z<p>Senyor: /* ПО и прошивка */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
== Общее ==<br />
* [[Сборка/Настройка/С чего начать|Включение RepRap]]<br />
<br />
== Механика ==<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Экструдер|Инструкция по экструдеру]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Координатный робот|Инструкция по координатному роботу]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Электроника|Инструкция по электронике]]<br />
<br />
==ПО и прошивка==<br />
{{notice|Расположенные ниже ссылки на страницы, возможно, содержат дубликаты тем и метериалов. Мы будем благодарны Вам за их корретировку.}}<br />
* [[Сборка/Способы_Настройки|Настройка Вашего RepRap]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Прошивка микроконтроллера|Инструкция по прошивке микроконтроллера]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Программное обеспечение|Как печатать изделия]]<br />
* [[Инструкция по эксплуатации: Программное обеспечение|Инструкция по программному обеспечению]]<br />
<br />
=== Форматы Файлов ===<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": RepRapG-Код|RepRap G-Код]] - Данный раздел описывает все G-коды, используемые для коммуникации компьютера с контроллером RepRap.<br />
* [[Java ПО настройки|Описание Файла настроек ПО]]<br />
* [http://reprap.org/bin/view/Main/MultipleMaterialsFiles Формат файла RFO (на англ.)] - Сохранение и загрузка множества объектов в сборочную базу RepRap.<br />
<br />
Задает все пераметры, сохранённые в ПО на компьютере для генерации G-кода, отправляемого на RepRap.<br />
<br />
[[Category:Инструкция по эксплуатации RepRap II "Мендель"]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D1%8D%D0%BA%D1%81%D0%BF%D0%BB%D1%83%D0%B0%D1%82%D0%B0%D1%86%D0%B8%D0%B8&diff=13929RepRap II "Мендель" Инструкция по эксплуатации2010-03-24T19:27:17Z<p>Senyor: /* Форматы Файлов */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
== Общее ==<br />
* [[Сборка/Настройка/С чего начать|Включение RepRap]]<br />
<br />
== Механика ==<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Экструдер|Инструкция по экструдеру]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Координатный робот|Инструкция по координатному роботу]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Электроника|Инструкция по электронике]]<br />
<br />
==ПО и прошивка==<br />
{{notice|Расположенные ниже ссылки на страницы, возможно, содержат дубликаты тем и метериалов. Мы будем благодарны Вам за их корретировку.}}<br />
* [[Сборка/Способы_Настройки|Настройка Вашего RepRap]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Прошивка микроконтроллера|Инструкция по прошивке микроконтроллера]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Программное обеспечение|Как печатать изделия]]<br />
* [[Инструкция по эксплуатации: Программное обеспечение|Инструкция по программному обеспечению]]<br />
<br />
=== Форматы Файлов ===<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": RepRapG-Код|RepRap G-Код]] - Данный раздел описывает все G-коды, используемые для коммуникации компьютера с контроллером RepRap.<br />
* [[Java ПО настройки|Описание Файла настроек ПО]]<br />
* [http://reprap.org/bin/view/Main/MultipleMaterialsFiles Формат файла RFO] - Сохранение и загрузка множества объектов в сборочную базу RepRap.<br />
<br />
Задает все пераметры, сохранённые в ПО на компьютере для генерации G-кода, отправляемого на RepRap.<br />
<br />
[[Category:Инструкция по эксплуатации RepRap II "Мендель"]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D1%8D%D0%BA%D1%81%D0%BF%D0%BB%D1%83%D0%B0%D1%82%D0%B0%D1%86%D0%B8%D0%B8&diff=13928RepRap II "Мендель" Инструкция по эксплуатации2010-03-24T19:22:02Z<p>Senyor: /* ПО и прошивка */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
== Общее ==<br />
* [[Сборка/Настройка/С чего начать|Включение RepRap]]<br />
<br />
== Механика ==<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Экструдер|Инструкция по экструдеру]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Координатный робот|Инструкция по координатному роботу]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Электроника|Инструкция по электронике]]<br />
<br />
==ПО и прошивка==<br />
{{notice|Расположенные ниже ссылки на страницы, возможно, содержат дубликаты тем и метериалов. Мы будем благодарны Вам за их корретировку.}}<br />
* [[Сборка/Способы_Настройки|Настройка Вашего RepRap]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Прошивка микроконтроллера|Инструкция по прошивке микроконтроллера]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Программное обеспечение|Как печатать изделия]]<br />
* [[Инструкция по эксплуатации: Программное обеспечение|Инструкция по программному обеспечению]]<br />
<br />
=== Форматы Файлов ===<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": RepRapG-Код|RepRap G-Код]] - Данный раздел описывает все G-коды, используемые для коммуникации компьютера с контроллером RepRap.<br />
* [[Java ПО настройки|Описание Файла настроек ПО]]<br />
* [http://reprap.org/bin/view/Main/MultipleMaterialsFiles| Формат файла RFO] - Saving and loading multiple objects on RepRap's build base.<br />
<br />
This defines all the parameters stored in the Java program that runs of the host computer to generate G Code files or send them to the RepRap machine.<br />
<br />
[[Category:Mendel User Manual]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D1%8D%D0%BA%D1%81%D0%BF%D0%BB%D1%83%D0%B0%D1%82%D0%B0%D1%86%D0%B8%D0%B8&diff=13927RepRap II "Мендель" Инструкция по эксплуатации2010-03-24T19:14:51Z<p>Senyor: /* Общее */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
== Общее ==<br />
* [[Сборка/Настройка/С чего начать|Включение RepRap]]<br />
<br />
== Механика ==<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Экструдер|Инструкция по экструдеру]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Координатный робот|Инструкция по координатному роботу]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Электроника|Инструкция по электронике]]<br />
<br />
==ПО и прошивка==<br />
{{notice|Расположенные ниже ссылки на страницы, возможно, содержат дубликаты тем и метериалов. Мы будем благодарны Вам за их корретировку.}}<br />
* [[Сборка/Способы_Настройки|Настройка Вашего RepRap]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Firmware Software|Firmware Help]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Host Software|How to print parts]]<br />
* [[Инструкция по эксплуатации: Host Software|Host Software Help]]<br />
<br />
=== Files and Formats ===<br />
* [[Mendel User Manual: RepRapGCodes|RepRap G Codes]] - This defines all the G Codes used to communicate from the host computer to the RepRap machine.<br />
* [[Java Software Preferences File]]<br />
* [http://reprap.org/bin/view/Main/MultipleMaterialsFiles| RFO file format] - Saving and loading multiple objects on RepRap's build base.<br />
<br />
This defines all the parameters stored in the Java program that runs of the host computer to generate G Code files or send them to the RepRap machine.<br />
<br />
[[Category:Mendel User Manual]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D1%8D%D0%BA%D1%81%D0%BF%D0%BB%D1%83%D0%B0%D1%82%D0%B0%D1%86%D0%B8%D0%B8&diff=13926RepRap II "Мендель" Инструкция по эксплуатации2010-03-24T19:14:33Z<p>Senyor: /* ПО и прошивка */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
== Общее ==<br />
* [[Сборка/Конфигурация/С чего начать|Включение RepRap]]<br />
<br />
== Механика ==<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Экструдер|Инструкция по экструдеру]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Координатный робот|Инструкция по координатному роботу]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Электроника|Инструкция по электронике]]<br />
<br />
==ПО и прошивка==<br />
{{notice|Расположенные ниже ссылки на страницы, возможно, содержат дубликаты тем и метериалов. Мы будем благодарны Вам за их корретировку.}}<br />
* [[Сборка/Способы_Настройки|Настройка Вашего RepRap]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Firmware Software|Firmware Help]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Host Software|How to print parts]]<br />
* [[Инструкция по эксплуатации: Host Software|Host Software Help]]<br />
<br />
=== Files and Formats ===<br />
* [[Mendel User Manual: RepRapGCodes|RepRap G Codes]] - This defines all the G Codes used to communicate from the host computer to the RepRap machine.<br />
* [[Java Software Preferences File]]<br />
* [http://reprap.org/bin/view/Main/MultipleMaterialsFiles| RFO file format] - Saving and loading multiple objects on RepRap's build base.<br />
<br />
This defines all the parameters stored in the Java program that runs of the host computer to generate G Code files or send them to the RepRap machine.<br />
<br />
[[Category:Mendel User Manual]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D1%8D%D0%BA%D1%81%D0%BF%D0%BB%D1%83%D0%B0%D1%82%D0%B0%D1%86%D0%B8%D0%B8&diff=13925RepRap II "Мендель" Инструкция по эксплуатации2010-03-24T19:13:26Z<p>Senyor: /* Software and Firmware */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
== Общее ==<br />
* [[Сборка/Конфигурация/С чего начать|Включение RepRap]]<br />
<br />
== Механика ==<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Экструдер|Инструкция по экструдеру]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Координатный робот|Инструкция по координатному роботу]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Электроника|Инструкция по электронике]]<br />
<br />
==ПО и прошивка==<br />
{{notice|Расположенные ниже ссылки на страницы, возможно, содержат дубликаты тем и метериалов. Мы будем благодарны Вам за их корретировку.}}<br />
* [[Сборка/Способы_Настройки|Настройка Вашего RepRap]]<br />
* [[Mendel User Manual: Firmware Software|Firmware Help]]<br />
* [[Mendel User Manual: Host Software|How to print parts]]<br />
* [[User Manual: Host Software|Host Software Help]]<br />
<br />
=== Files and Formats ===<br />
* [[Mendel User Manual: RepRapGCodes|RepRap G Codes]] - This defines all the G Codes used to communicate from the host computer to the RepRap machine.<br />
* [[Java Software Preferences File]]<br />
* [http://reprap.org/bin/view/Main/MultipleMaterialsFiles| RFO file format] - Saving and loading multiple objects on RepRap's build base.<br />
<br />
This defines all the parameters stored in the Java program that runs of the host computer to generate G Code files or send them to the RepRap machine.<br />
<br />
[[Category:Mendel User Manual]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D1%8D%D0%BA%D1%81%D0%BF%D0%BB%D1%83%D0%B0%D1%82%D0%B0%D1%86%D0%B8%D0%B8&diff=13924RepRap II "Мендель" Инструкция по эксплуатации2010-03-24T19:09:17Z<p>Senyor: /* Mechanical */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
== Общее ==<br />
* [[Сборка/Конфигурация/С чего начать|Включение RepRap]]<br />
<br />
== Механика ==<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Экструдер|Инструкция по экструдеру]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Координатный робот|Инструкция по координатному роботу]]<br />
* [[Инструкция по эксплуатации RepRap II "Мендель": Электроника|Инструкция по электронике]]<br />
<br />
==Software and Firmware==<br />
{{notice|The pages linked here unfortunately contain some duplication of material and topics. Please help us to clean this up.}}<br />
* [[Builders/Config_Methods|Configuring your RepRap]]<br />
* [[Mendel User Manual: Firmware Software|Firmware Help]]<br />
* [[Mendel User Manual: Host Software|How to print parts]]<br />
* [[User Manual: Host Software|Host Software Help]]<br />
<br />
=== Files and Formats ===<br />
* [[Mendel User Manual: RepRapGCodes|RepRap G Codes]] - This defines all the G Codes used to communicate from the host computer to the RepRap machine.<br />
* [[Java Software Preferences File]]<br />
* [http://reprap.org/bin/view/Main/MultipleMaterialsFiles| RFO file format] - Saving and loading multiple objects on RepRap's build base.<br />
<br />
This defines all the parameters stored in the Java program that runs of the host computer to generate G Code files or send them to the RepRap machine.<br />
<br />
[[Category:Mendel User Manual]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D1%8D%D0%BA%D1%81%D0%BF%D0%BB%D1%83%D0%B0%D1%82%D0%B0%D1%86%D0%B8%D0%B8&diff=13923RepRap II "Мендель" Инструкция по эксплуатации2010-03-24T19:03:52Z<p>Senyor: /* General */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
== Общее ==<br />
* [[Сборка/Конфигурация/С чего начать|Включение RepRap]]<br />
<br />
== Mechanical ==<br />
* [[Mendel User Manual: Extruder|Extruder Help]]<br />
* [[Mendel User Manual: Cartesian Bot|Cartesian Bot Help]]<br />
* [[Mendel User Manual: Electronics|Electronics Help]]<br />
<br />
==Software and Firmware==<br />
{{notice|The pages linked here unfortunately contain some duplication of material and topics. Please help us to clean this up.}}<br />
* [[Builders/Config_Methods|Configuring your RepRap]]<br />
* [[Mendel User Manual: Firmware Software|Firmware Help]]<br />
* [[Mendel User Manual: Host Software|How to print parts]]<br />
* [[User Manual: Host Software|Host Software Help]]<br />
<br />
=== Files and Formats ===<br />
* [[Mendel User Manual: RepRapGCodes|RepRap G Codes]] - This defines all the G Codes used to communicate from the host computer to the RepRap machine.<br />
* [[Java Software Preferences File]]<br />
* [http://reprap.org/bin/view/Main/MultipleMaterialsFiles| RFO file format] - Saving and loading multiple objects on RepRap's build base.<br />
<br />
This defines all the parameters stored in the Java program that runs of the host computer to generate G Code files or send them to the RepRap machine.<br />
<br />
[[Category:Mendel User Manual]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D0%BF%D0%BE%D0%BA%D1%83%D0%BF%D0%BA%D0%B5&diff=13922RepRap II "Мендель" Инструкция по покупке2010-03-24T19:01:27Z<p>Senyor: /* For-Sale Forum */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
Документация по созданию RepRap II "Мендель" доступна каждому (открыта и предоставляется безвозмездно), поэтому нельзя однозначно сказать, где машину можно приобрести. Поэтому существует множество вариантов. Поскольку машина все время улучшается, цены на изготовление снижаются. Далее в списке Вы можете найти места, где приобрести отдельные части и/или наборы для изготовления "Менделя".<br />
<br />
Список доступных в настоящее время компонентов "Менделя" и поставщиков доступен [[Mendel_assembly_data_sheet |по этой ссылке]]. <br />
<br />
'''Заметка:''' Не обязательно приобретать набор, многие [[:Category:Mendel RepStrap|RepStrap'ы]] Вы можете купить или изготовить из уже имеющихся у Вас в наличии инструментов и материалов.<br />
<br />
==Форум Продаж==<br />
<br />
Мы поддерживаем форум [http://dev.forums.reprap.org/index.php?93 Форум "Продается/Разыскивается"] (на англ.), на котором люди, имеющие наборы компонентов RepRap могут могут размещать объявления о продаже. А те, кто хочет приобрести, размещают запросы на покупку. ''Caveat emptor'' - мы пытаемся оградить Вас от влияния мошенников, однако форум открыт для всех желающих. Не пересылайте деньги, пока Вы не удостоверитесь в благонадежности адресата.<br />
<br />
==Полностью собранные наборы RapRap II "Мендель"==<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
==Mendel Parts Kits==<br />
===Полные наборы===<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
===Электронные и механические наборы/запчасти===<br />
* [http://makerbot.com/ Makerbot] - продажа полностью собранных/наборов запчастей/наборов печатных плат для третьего поколения электроники RepRap и пластиковых частей.<br />
* [http://www.bitsfrombytes.com/ Bits from Bytes] - продажа пластиковой проволоки и альтернативной (не стандарта RepRap) электроники.<br />
* [http://www.reprapsource.com/ RepRap Source] - продажа пластиковой проволоки, печатных плат прошлых поколений и механических частей.<br />
* [http://www.iprint3d.org/ iPrint3D] - продажа третьего поколения электроники RepRap.<br />
<br />
* [http://parts.reprap.org/ RepRap Parts Lister] - генерация списка для заказа в двух различных магазинах. В настоящее время ограничено третьим поколением электроники RepRap.<br />
<br />
===Пластиковые запчасти, изготовленные на RepRap===<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
==Поставщики отдельных комплектующих "Менделя"==<br />
<br />
*[[Поставщики/Шаговые Двигатели]]<br />
<br />
===Электрические===<br />
* [http://www.digikey.com/ digikey US] - '''(Интернет-магазин)'''<br />
* [http://www.digikey.ca/ digikey Canada] - '''Канада (Интернет-магазин)'''<br />
* [http://mouser.com Mouser] - '''Интернет-магазин''' (русский/английский)<br />
<br />
===Механичесике===<br />
* [http://www.mcmaster.com/ McMaster-Carr] - '''осуществляет поставки только на территории США (Интернет-магазин)''' - здесь есть все не воспроизводимые с помощью RepRap механические комплектующие для "Менделя".<br />
* [http://www.fastenal.com/web/home.ex Fastenal] - '''Канада и США (магазин/Интернет-магазин)''' - поставляет все не воспроизводимые с помощью RepRap механические комплектующие, за исключением ремней двигателей.<br />
* [http://www.sdp-si.com/web/html/products.htm SDP/SI] - '''Канада (Интернет-магазин)''' - поставляет все не воспроизводимые с помощью RepRap механические комплектующие (возможно, не все), всключая ремни двигателей.<br />
<br />
==Поставщики расходных материалов для печати==<br />
Для ознакомления с поставщиками ABS/PLA/и т.д. смотрите [[Материалы Печати|Поставщики расходных материалов для печати]]<br />
<br />
==Форум для тех, кто продает/хочет купить RepRap==<br />
* Комплектующие RepRap также возможно приобрести по адресу [http://forums.reprap.org/list.php?94 RepRap For-Sale Forum (на англ.)]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D0%BF%D0%BE%D0%BA%D1%83%D0%BF%D0%BA%D0%B5&diff=13921RepRap II "Мендель" Инструкция по покупке2010-03-24T18:58:53Z<p>Senyor: /* Printing Materials Suppliers */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
Документация по созданию RepRap II "Мендель" доступна каждому (открыта и предоставляется безвозмездно), поэтому нельзя однозначно сказать, где машину можно приобрести. Поэтому существует множество вариантов. Поскольку машина все время улучшается, цены на изготовление снижаются. Далее в списке Вы можете найти места, где приобрести отдельные части и/или наборы для изготовления "Менделя".<br />
<br />
Список доступных в настоящее время компонентов "Менделя" и поставщиков доступен [[Mendel_assembly_data_sheet |по этой ссылке]]. <br />
<br />
'''Заметка:''' Не обязательно приобретать набор, многие [[:Category:Mendel RepStrap|RepStrap'ы]] Вы можете купить или изготовить из уже имеющихся у Вас в наличии инструментов и материалов.<br />
<br />
==Форум Продаж==<br />
<br />
Мы поддерживаем форум [http://dev.forums.reprap.org/index.php?93 Форум "Продается/Разыскивается"] (на англ.), на котором люди, имеющие наборы компонентов RepRap могут могут размещать объявления о продаже. А те, кто хочет приобрести, размещают запросы на покупку. ''Caveat emptor'' - мы пытаемся оградить Вас от влияния мошенников, однако форум открыт для всех желающих. Не пересылайте деньги, пока Вы не удостоверитесь в благонадежности адресата.<br />
<br />
==Полностью собранные наборы RapRap II "Мендель"==<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
==Mendel Parts Kits==<br />
===Полные наборы===<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
===Электронные и механические наборы/запчасти===<br />
* [http://makerbot.com/ Makerbot] - продажа полностью собранных/наборов запчастей/наборов печатных плат для третьего поколения электроники RepRap и пластиковых частей.<br />
* [http://www.bitsfrombytes.com/ Bits from Bytes] - продажа пластиковой проволоки и альтернативной (не стандарта RepRap) электроники.<br />
* [http://www.reprapsource.com/ RepRap Source] - продажа пластиковой проволоки, печатных плат прошлых поколений и механических частей.<br />
* [http://www.iprint3d.org/ iPrint3D] - продажа третьего поколения электроники RepRap.<br />
<br />
* [http://parts.reprap.org/ RepRap Parts Lister] - генерация списка для заказа в двух различных магазинах. В настоящее время ограничено третьим поколением электроники RepRap.<br />
<br />
===Пластиковые запчасти, изготовленные на RepRap===<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
==Поставщики отдельных комплектующих "Менделя"==<br />
<br />
*[[Поставщики/Шаговые Двигатели]]<br />
<br />
===Электрические===<br />
* [http://www.digikey.com/ digikey US] - '''(Интернет-магазин)'''<br />
* [http://www.digikey.ca/ digikey Canada] - '''Канада (Интернет-магазин)'''<br />
* [http://mouser.com Mouser] - '''Интернет-магазин''' (русский/английский)<br />
<br />
===Механичесике===<br />
* [http://www.mcmaster.com/ McMaster-Carr] - '''осуществляет поставки только на территории США (Интернет-магазин)''' - здесь есть все не воспроизводимые с помощью RepRap механические комплектующие для "Менделя".<br />
* [http://www.fastenal.com/web/home.ex Fastenal] - '''Канада и США (магазин/Интернет-магазин)''' - поставляет все не воспроизводимые с помощью RepRap механические комплектующие, за исключением ремней двигателей.<br />
* [http://www.sdp-si.com/web/html/products.htm SDP/SI] - '''Канада (Интернет-магазин)''' - поставляет все не воспроизводимые с помощью RepRap механические комплектующие (возможно, не все), всключая ремни двигателей.<br />
<br />
==Поставщики расходных материалов для печати==<br />
Для ознакомления с поставщиками ABS/PLA/и т.д. смотрите [[Материалы Печати|Поставщики расходных материалов для печати]]<br />
<br />
==For-Sale Forum==<br />
* RepRap parts are also listed for sale on the [http://forums.reprap.org/list.php?94 RepRap For-Sale Forum]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D0%BF%D0%BE%D0%BA%D1%83%D0%BF%D0%BA%D0%B5&diff=13920RepRap II "Мендель" Инструкция по покупке2010-03-24T18:55:58Z<p>Senyor: /* Электрические */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
Документация по созданию RepRap II "Мендель" доступна каждому (открыта и предоставляется безвозмездно), поэтому нельзя однозначно сказать, где машину можно приобрести. Поэтому существует множество вариантов. Поскольку машина все время улучшается, цены на изготовление снижаются. Далее в списке Вы можете найти места, где приобрести отдельные части и/или наборы для изготовления "Менделя".<br />
<br />
Список доступных в настоящее время компонентов "Менделя" и поставщиков доступен [[Mendel_assembly_data_sheet |по этой ссылке]]. <br />
<br />
'''Заметка:''' Не обязательно приобретать набор, многие [[:Category:Mendel RepStrap|RepStrap'ы]] Вы можете купить или изготовить из уже имеющихся у Вас в наличии инструментов и материалов.<br />
<br />
==Форум Продаж==<br />
<br />
Мы поддерживаем форум [http://dev.forums.reprap.org/index.php?93 Форум "Продается/Разыскивается"] (на англ.), на котором люди, имеющие наборы компонентов RepRap могут могут размещать объявления о продаже. А те, кто хочет приобрести, размещают запросы на покупку. ''Caveat emptor'' - мы пытаемся оградить Вас от влияния мошенников, однако форум открыт для всех желающих. Не пересылайте деньги, пока Вы не удостоверитесь в благонадежности адресата.<br />
<br />
==Полностью собранные наборы RapRap II "Мендель"==<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
==Mendel Parts Kits==<br />
===Полные наборы===<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
===Электронные и механические наборы/запчасти===<br />
* [http://makerbot.com/ Makerbot] - продажа полностью собранных/наборов запчастей/наборов печатных плат для третьего поколения электроники RepRap и пластиковых частей.<br />
* [http://www.bitsfrombytes.com/ Bits from Bytes] - продажа пластиковой проволоки и альтернативной (не стандарта RepRap) электроники.<br />
* [http://www.reprapsource.com/ RepRap Source] - продажа пластиковой проволоки, печатных плат прошлых поколений и механических частей.<br />
* [http://www.iprint3d.org/ iPrint3D] - продажа третьего поколения электроники RepRap.<br />
<br />
* [http://parts.reprap.org/ RepRap Parts Lister] - генерация списка для заказа в двух различных магазинах. В настоящее время ограничено третьим поколением электроники RepRap.<br />
<br />
===Пластиковые запчасти, изготовленные на RepRap===<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
==Поставщики отдельных комплектующих "Менделя"==<br />
<br />
*[[Поставщики/Шаговые Двигатели]]<br />
<br />
===Электрические===<br />
* [http://www.digikey.com/ digikey US] - '''(Интернет-магазин)'''<br />
* [http://www.digikey.ca/ digikey Canada] - '''Канада (Интернет-магазин)'''<br />
* [http://mouser.com Mouser] - '''Интернет-магазин''' (русский/английский)<br />
<br />
===Механичесике===<br />
* [http://www.mcmaster.com/ McMaster-Carr] - '''осуществляет поставки только на территории США (Интернет-магазин)''' - здесь есть все не воспроизводимые с помощью RepRap механические комплектующие для "Менделя".<br />
* [http://www.fastenal.com/web/home.ex Fastenal] - '''Канада и США (магазин/Интернет-магазин)''' - поставляет все не воспроизводимые с помощью RepRap механические комплектующие, за исключением ремней двигателей.<br />
* [http://www.sdp-si.com/web/html/products.htm SDP/SI] - '''Канада (Интернет-магазин)''' - поставляет все не воспроизводимые с помощью RepRap механические комплектующие (возможно, не все), всключая ремни двигателей.<br />
<br />
==Printing Materials Suppliers==<br />
For ABS/PLA/Etc. suppliers see [[Printing Material Suppliers]]<br />
<br />
==For-Sale Forum==<br />
* RepRap parts are also listed for sale on the [http://forums.reprap.org/list.php?94 RepRap For-Sale Forum]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D0%BF%D0%BE%D0%BA%D1%83%D0%BF%D0%BA%D0%B5&diff=13919RepRap II "Мендель" Инструкция по покупке2010-03-24T18:55:19Z<p>Senyor: /* Non-kit Mendel Parts Suppliers */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
Документация по созданию RepRap II "Мендель" доступна каждому (открыта и предоставляется безвозмездно), поэтому нельзя однозначно сказать, где машину можно приобрести. Поэтому существует множество вариантов. Поскольку машина все время улучшается, цены на изготовление снижаются. Далее в списке Вы можете найти места, где приобрести отдельные части и/или наборы для изготовления "Менделя".<br />
<br />
Список доступных в настоящее время компонентов "Менделя" и поставщиков доступен [[Mendel_assembly_data_sheet |по этой ссылке]]. <br />
<br />
'''Заметка:''' Не обязательно приобретать набор, многие [[:Category:Mendel RepStrap|RepStrap'ы]] Вы можете купить или изготовить из уже имеющихся у Вас в наличии инструментов и материалов.<br />
<br />
==Форум Продаж==<br />
<br />
Мы поддерживаем форум [http://dev.forums.reprap.org/index.php?93 Форум "Продается/Разыскивается"] (на англ.), на котором люди, имеющие наборы компонентов RepRap могут могут размещать объявления о продаже. А те, кто хочет приобрести, размещают запросы на покупку. ''Caveat emptor'' - мы пытаемся оградить Вас от влияния мошенников, однако форум открыт для всех желающих. Не пересылайте деньги, пока Вы не удостоверитесь в благонадежности адресата.<br />
<br />
==Полностью собранные наборы RapRap II "Мендель"==<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
==Mendel Parts Kits==<br />
===Полные наборы===<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
===Электронные и механические наборы/запчасти===<br />
* [http://makerbot.com/ Makerbot] - продажа полностью собранных/наборов запчастей/наборов печатных плат для третьего поколения электроники RepRap и пластиковых частей.<br />
* [http://www.bitsfrombytes.com/ Bits from Bytes] - продажа пластиковой проволоки и альтернативной (не стандарта RepRap) электроники.<br />
* [http://www.reprapsource.com/ RepRap Source] - продажа пластиковой проволоки, печатных плат прошлых поколений и механических частей.<br />
* [http://www.iprint3d.org/ iPrint3D] - продажа третьего поколения электроники RepRap.<br />
<br />
* [http://parts.reprap.org/ RepRap Parts Lister] - генерация списка для заказа в двух различных магазинах. В настоящее время ограничено третьим поколением электроники RepRap.<br />
<br />
===Пластиковые запчасти, изготовленные на RepRap===<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
==Поставщики отдельных комплектующих "Менделя"==<br />
<br />
*[[Поставщики/Шаговые Двигатели]]<br />
<br />
===Электрические===<br />
* [http://www.digikey.com/ digikey US] - '''(Интернет-магазин)'''<br />
* [http://www.digikey.ca/ digikey Canada] - '''Канада (Интернет-магазин)'''<br />
* [http://mouser.com Mouser] - '''Интернет-магазин'''<br />
<br />
===Механичесике===<br />
* [http://www.mcmaster.com/ McMaster-Carr] - '''осуществляет поставки только на территории США (Интернет-магазин)''' - здесь есть все не воспроизводимые с помощью RepRap механические комплектующие для "Менделя".<br />
* [http://www.fastenal.com/web/home.ex Fastenal] - '''Канада и США (магазин/Интернет-магазин)''' - поставляет все не воспроизводимые с помощью RepRap механические комплектующие, за исключением ремней двигателей.<br />
* [http://www.sdp-si.com/web/html/products.htm SDP/SI] - '''Канада (Интернет-магазин)''' - поставляет все не воспроизводимые с помощью RepRap механические комплектующие (возможно, не все), всключая ремни двигателей.<br />
<br />
==Printing Materials Suppliers==<br />
For ABS/PLA/Etc. suppliers see [[Printing Material Suppliers]]<br />
<br />
==For-Sale Forum==<br />
* RepRap parts are also listed for sale on the [http://forums.reprap.org/list.php?94 RepRap For-Sale Forum]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D0%BF%D0%BE%D0%BA%D1%83%D0%BF%D0%BA%D0%B5&diff=13918RepRap II "Мендель" Инструкция по покупке2010-03-24T18:46:55Z<p>Senyor: /* Reprapped Parts Kits */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
Документация по созданию RepRap II "Мендель" доступна каждому (открыта и предоставляется безвозмездно), поэтому нельзя однозначно сказать, где машину можно приобрести. Поэтому существует множество вариантов. Поскольку машина все время улучшается, цены на изготовление снижаются. Далее в списке Вы можете найти места, где приобрести отдельные части и/или наборы для изготовления "Менделя".<br />
<br />
Список доступных в настоящее время компонентов "Менделя" и поставщиков доступен [[Mendel_assembly_data_sheet |по этой ссылке]]. <br />
<br />
'''Заметка:''' Не обязательно приобретать набор, многие [[:Category:Mendel RepStrap|RepStrap'ы]] Вы можете купить или изготовить из уже имеющихся у Вас в наличии инструментов и материалов.<br />
<br />
==Форум Продаж==<br />
<br />
Мы поддерживаем форум [http://dev.forums.reprap.org/index.php?93 Форум "Продается/Разыскивается"] (на англ.), на котором люди, имеющие наборы компонентов RepRap могут могут размещать объявления о продаже. А те, кто хочет приобрести, размещают запросы на покупку. ''Caveat emptor'' - мы пытаемся оградить Вас от влияния мошенников, однако форум открыт для всех желающих. Не пересылайте деньги, пока Вы не удостоверитесь в благонадежности адресата.<br />
<br />
==Полностью собранные наборы RapRap II "Мендель"==<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
==Mendel Parts Kits==<br />
===Полные наборы===<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
===Электронные и механические наборы/запчасти===<br />
* [http://makerbot.com/ Makerbot] - продажа полностью собранных/наборов запчастей/наборов печатных плат для третьего поколения электроники RepRap и пластиковых частей.<br />
* [http://www.bitsfrombytes.com/ Bits from Bytes] - продажа пластиковой проволоки и альтернативной (не стандарта RepRap) электроники.<br />
* [http://www.reprapsource.com/ RepRap Source] - продажа пластиковой проволоки, печатных плат прошлых поколений и механических частей.<br />
* [http://www.iprint3d.org/ iPrint3D] - продажа третьего поколения электроники RepRap.<br />
<br />
* [http://parts.reprap.org/ RepRap Parts Lister] - генерация списка для заказа в двух различных магазинах. В настоящее время ограничено третьим поколением электроники RepRap.<br />
<br />
===Пластиковые запчасти, изготовленные на RepRap===<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
==Non-kit Mendel Parts Suppliers==<br />
<br />
*[[Suppliers/Stepping Motors]]<br />
<br />
===Electrical===<br />
* [http://www.digikey.com/ digikey US] - '''(online)'''<br />
* [http://www.digikey.ca/ digikey Canada] - '''Canada (online)'''<br />
* [http://mouser.com Mouser] - '''online'''<br />
<br />
===Mechanical===<br />
* [http://www.mcmaster.com/ McMaster-Carr] - '''ships to US addresses only (online)''' - one stop supplier for all the non-RR mechanical parts of Mendel.<br />
* [http://www.fastenal.com/web/home.ex Fastenal] - '''Canada and US (stores/online)''' - supplies all non-RR mechanical parts except for the drive belts.<br />
* [http://www.sdp-si.com/web/html/products.htm SDP/SI] - '''Canada (online)''' - supplies non-RR mechanical parts including drive belts (unknown if they supply all non-RR parts or not).<br />
<br />
==Printing Materials Suppliers==<br />
For ABS/PLA/Etc. suppliers see [[Printing Material Suppliers]]<br />
<br />
==For-Sale Forum==<br />
* RepRap parts are also listed for sale on the [http://forums.reprap.org/list.php?94 RepRap For-Sale Forum]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D0%BF%D0%BE%D0%BA%D1%83%D0%BF%D0%BA%D0%B5&diff=13917RepRap II "Мендель" Инструкция по покупке2010-03-24T18:45:35Z<p>Senyor: /* Electrical and mechanical kits and parts */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
Документация по созданию RepRap II "Мендель" доступна каждому (открыта и предоставляется безвозмездно), поэтому нельзя однозначно сказать, где машину можно приобрести. Поэтому существует множество вариантов. Поскольку машина все время улучшается, цены на изготовление снижаются. Далее в списке Вы можете найти места, где приобрести отдельные части и/или наборы для изготовления "Менделя".<br />
<br />
Список доступных в настоящее время компонентов "Менделя" и поставщиков доступен [[Mendel_assembly_data_sheet |по этой ссылке]]. <br />
<br />
'''Заметка:''' Не обязательно приобретать набор, многие [[:Category:Mendel RepStrap|RepStrap'ы]] Вы можете купить или изготовить из уже имеющихся у Вас в наличии инструментов и материалов.<br />
<br />
==Форум Продаж==<br />
<br />
Мы поддерживаем форум [http://dev.forums.reprap.org/index.php?93 Форум "Продается/Разыскивается"] (на англ.), на котором люди, имеющие наборы компонентов RepRap могут могут размещать объявления о продаже. А те, кто хочет приобрести, размещают запросы на покупку. ''Caveat emptor'' - мы пытаемся оградить Вас от влияния мошенников, однако форум открыт для всех желающих. Не пересылайте деньги, пока Вы не удостоверитесь в благонадежности адресата.<br />
<br />
==Полностью собранные наборы RapRap II "Мендель"==<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
==Mendel Parts Kits==<br />
===Полные наборы===<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
===Электронные и механические наборы/запчасти===<br />
* [http://makerbot.com/ Makerbot] - продажа полностью собранных/наборов запчастей/наборов печатных плат для третьего поколения электроники RepRap и пластиковых частей.<br />
* [http://www.bitsfrombytes.com/ Bits from Bytes] - продажа пластиковой проволоки и альтернативной (не стандарта RepRap) электроники.<br />
* [http://www.reprapsource.com/ RepRap Source] - продажа пластиковой проволоки, печатных плат прошлых поколений и механических частей.<br />
* [http://www.iprint3d.org/ iPrint3D] - продажа третьего поколения электроники RepRap.<br />
<br />
* [http://parts.reprap.org/ RepRap Parts Lister] - генерация списка для заказа в двух различных магазинах. В настоящее время ограничено третьим поколением электроники RepRap.<br />
<br />
===Reprapped Parts Kits===<br />
* No mendel kits are for sale yet but when they become available please list them here.<br />
<br />
==Non-kit Mendel Parts Suppliers==<br />
<br />
*[[Suppliers/Stepping Motors]]<br />
<br />
===Electrical===<br />
* [http://www.digikey.com/ digikey US] - '''(online)'''<br />
* [http://www.digikey.ca/ digikey Canada] - '''Canada (online)'''<br />
* [http://mouser.com Mouser] - '''online'''<br />
<br />
===Mechanical===<br />
* [http://www.mcmaster.com/ McMaster-Carr] - '''ships to US addresses only (online)''' - one stop supplier for all the non-RR mechanical parts of Mendel.<br />
* [http://www.fastenal.com/web/home.ex Fastenal] - '''Canada and US (stores/online)''' - supplies all non-RR mechanical parts except for the drive belts.<br />
* [http://www.sdp-si.com/web/html/products.htm SDP/SI] - '''Canada (online)''' - supplies non-RR mechanical parts including drive belts (unknown if they supply all non-RR parts or not).<br />
<br />
==Printing Materials Suppliers==<br />
For ABS/PLA/Etc. suppliers see [[Printing Material Suppliers]]<br />
<br />
==For-Sale Forum==<br />
* RepRap parts are also listed for sale on the [http://forums.reprap.org/list.php?94 RepRap For-Sale Forum]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D0%BF%D0%BE%D0%BA%D1%83%D0%BF%D0%BA%D0%B5&diff=13916RepRap II "Мендель" Инструкция по покупке2010-03-24T18:38:25Z<p>Senyor: /* Full Kits */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
Документация по созданию RepRap II "Мендель" доступна каждому (открыта и предоставляется безвозмездно), поэтому нельзя однозначно сказать, где машину можно приобрести. Поэтому существует множество вариантов. Поскольку машина все время улучшается, цены на изготовление снижаются. Далее в списке Вы можете найти места, где приобрести отдельные части и/или наборы для изготовления "Менделя".<br />
<br />
Список доступных в настоящее время компонентов "Менделя" и поставщиков доступен [[Mendel_assembly_data_sheet |по этой ссылке]]. <br />
<br />
'''Заметка:''' Не обязательно приобретать набор, многие [[:Category:Mendel RepStrap|RepStrap'ы]] Вы можете купить или изготовить из уже имеющихся у Вас в наличии инструментов и материалов.<br />
<br />
==Форум Продаж==<br />
<br />
Мы поддерживаем форум [http://dev.forums.reprap.org/index.php?93 Форум "Продается/Разыскивается"] (на англ.), на котором люди, имеющие наборы компонентов RepRap могут могут размещать объявления о продаже. А те, кто хочет приобрести, размещают запросы на покупку. ''Caveat emptor'' - мы пытаемся оградить Вас от влияния мошенников, однако форум открыт для всех желающих. Не пересылайте деньги, пока Вы не удостоверитесь в благонадежности адресата.<br />
<br />
==Полностью собранные наборы RapRap II "Мендель"==<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
==Mendel Parts Kits==<br />
===Полные наборы===<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
===Electrical and mechanical kits and parts===<br />
* [http://makerbot.com/ Makerbot] - seller of fully assembled/parts kits/pcb-only kits for RepRap Generation 3 electronics and plastruder parts.<br />
* [http://www.bitsfrombytes.com/ Bits from Bytes] - seller of plastic filament and alternative (non RepRap standard) electronics.<br />
* [http://www.reprapsource.com/ RepRap Source] - seller of plastic filament, older generation PCBs, and mechanical parts.<br />
* [http://www.iprint3d.org/ iPrint3D] - seller of RepRap Generation 3 electronics<br />
<br />
* [http://parts.reprap.org/ RepRap Parts Lister] - generates shopping lists for a couple different stores. Currently limited to the Gen 3 electronics.<br />
<br />
===Reprapped Parts Kits===<br />
* No mendel kits are for sale yet but when they become available please list them here.<br />
<br />
==Non-kit Mendel Parts Suppliers==<br />
<br />
*[[Suppliers/Stepping Motors]]<br />
<br />
===Electrical===<br />
* [http://www.digikey.com/ digikey US] - '''(online)'''<br />
* [http://www.digikey.ca/ digikey Canada] - '''Canada (online)'''<br />
* [http://mouser.com Mouser] - '''online'''<br />
<br />
===Mechanical===<br />
* [http://www.mcmaster.com/ McMaster-Carr] - '''ships to US addresses only (online)''' - one stop supplier for all the non-RR mechanical parts of Mendel.<br />
* [http://www.fastenal.com/web/home.ex Fastenal] - '''Canada and US (stores/online)''' - supplies all non-RR mechanical parts except for the drive belts.<br />
* [http://www.sdp-si.com/web/html/products.htm SDP/SI] - '''Canada (online)''' - supplies non-RR mechanical parts including drive belts (unknown if they supply all non-RR parts or not).<br />
<br />
==Printing Materials Suppliers==<br />
For ABS/PLA/Etc. suppliers see [[Printing Material Suppliers]]<br />
<br />
==For-Sale Forum==<br />
* RepRap parts are also listed for sale on the [http://forums.reprap.org/list.php?94 RepRap For-Sale Forum]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D0%BF%D0%BE%D0%BA%D1%83%D0%BF%D0%BA%D0%B5&diff=13915RepRap II "Мендель" Инструкция по покупке2010-03-24T18:37:31Z<p>Senyor: /* Fully Assembled Mendel Kits */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
Документация по созданию RepRap II "Мендель" доступна каждому (открыта и предоставляется безвозмездно), поэтому нельзя однозначно сказать, где машину можно приобрести. Поэтому существует множество вариантов. Поскольку машина все время улучшается, цены на изготовление снижаются. Далее в списке Вы можете найти места, где приобрести отдельные части и/или наборы для изготовления "Менделя".<br />
<br />
Список доступных в настоящее время компонентов "Менделя" и поставщиков доступен [[Mendel_assembly_data_sheet |по этой ссылке]]. <br />
<br />
'''Заметка:''' Не обязательно приобретать набор, многие [[:Category:Mendel RepStrap|RepStrap'ы]] Вы можете купить или изготовить из уже имеющихся у Вас в наличии инструментов и материалов.<br />
<br />
==Форум Продаж==<br />
<br />
Мы поддерживаем форум [http://dev.forums.reprap.org/index.php?93 Форум "Продается/Разыскивается"] (на англ.), на котором люди, имеющие наборы компонентов RepRap могут могут размещать объявления о продаже. А те, кто хочет приобрести, размещают запросы на покупку. ''Caveat emptor'' - мы пытаемся оградить Вас от влияния мошенников, однако форум открыт для всех желающих. Не пересылайте деньги, пока Вы не удостоверитесь в благонадежности адресата.<br />
<br />
==Полностью собранные наборы RapRap II "Мендель"==<br />
* В данный момент наборы отсутствуют, однако перечислите, пожалуйста, их здесь, когда они появятся.<br />
<br />
==Mendel Parts Kits==<br />
===Full Kits===<br />
* No mendel kits are for sale yet but when they become available please list them here.<br />
===Electrical and mechanical kits and parts===<br />
* [http://makerbot.com/ Makerbot] - seller of fully assembled/parts kits/pcb-only kits for RepRap Generation 3 electronics and plastruder parts.<br />
* [http://www.bitsfrombytes.com/ Bits from Bytes] - seller of plastic filament and alternative (non RepRap standard) electronics.<br />
* [http://www.reprapsource.com/ RepRap Source] - seller of plastic filament, older generation PCBs, and mechanical parts.<br />
* [http://www.iprint3d.org/ iPrint3D] - seller of RepRap Generation 3 electronics<br />
<br />
* [http://parts.reprap.org/ RepRap Parts Lister] - generates shopping lists for a couple different stores. Currently limited to the Gen 3 electronics.<br />
<br />
===Reprapped Parts Kits===<br />
* No mendel kits are for sale yet but when they become available please list them here.<br />
<br />
==Non-kit Mendel Parts Suppliers==<br />
<br />
*[[Suppliers/Stepping Motors]]<br />
<br />
===Electrical===<br />
* [http://www.digikey.com/ digikey US] - '''(online)'''<br />
* [http://www.digikey.ca/ digikey Canada] - '''Canada (online)'''<br />
* [http://mouser.com Mouser] - '''online'''<br />
<br />
===Mechanical===<br />
* [http://www.mcmaster.com/ McMaster-Carr] - '''ships to US addresses only (online)''' - one stop supplier for all the non-RR mechanical parts of Mendel.<br />
* [http://www.fastenal.com/web/home.ex Fastenal] - '''Canada and US (stores/online)''' - supplies all non-RR mechanical parts except for the drive belts.<br />
* [http://www.sdp-si.com/web/html/products.htm SDP/SI] - '''Canada (online)''' - supplies non-RR mechanical parts including drive belts (unknown if they supply all non-RR parts or not).<br />
<br />
==Printing Materials Suppliers==<br />
For ABS/PLA/Etc. suppliers see [[Printing Material Suppliers]]<br />
<br />
==For-Sale Forum==<br />
* RepRap parts are also listed for sale on the [http://forums.reprap.org/list.php?94 RepRap For-Sale Forum]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D0%BF%D0%BE%D0%BA%D1%83%D0%BF%D0%BA%D0%B5&diff=13433RepRap II "Мендель" Инструкция по покупке2010-03-17T20:41:52Z<p>Senyor: /* Форум Продаж */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
Документация по созданию RepRap II "Мендель" доступна каждому (открыта и предоставляется безвозмездно), поэтому нельзя однозначно сказать, где машину можно приобрести. Поэтому существует множество вариантов. Поскольку машина все время улучшается, цены на изготовление снижаются. Далее в списке Вы можете найти места, где приобрести отдельные части и/или наборы для изготовления "Менделя".<br />
<br />
Список доступных в настоящее время компонентов "Менделя" и поставщиков доступен [[Mendel_assembly_data_sheet |по этой ссылке]]. <br />
<br />
'''Заметка:''' Не обязательно приобретать набор, многие [[:Category:Mendel RepStrap|RepStrap'ы]] Вы можете купить или изготовить из уже имеющихся у Вас в наличии инструментов и материалов.<br />
<br />
==Форум Продаж==<br />
<br />
Мы поддерживаем форум [http://dev.forums.reprap.org/index.php?93 Форум "Продается/Разыскивается"] (на англ.), на котором люди, имеющие наборы компонентов RepRap могут могут размещать объявления о продаже. А те, кто хочет приобрести, размещают запросы на покупку. ''Caveat emptor'' - мы пытаемся оградить Вас от влияния мошенников, однако форум открыт для всех желающих. Не пересылайте деньги, пока Вы не удостоверитесь в благонадежности адресата.<br />
<br />
==Fully Assembled Mendel Kits==<br />
* No mendel kits are for sale yet but when they become available please list them here.<br />
<br />
==Mendel Parts Kits==<br />
===Full Kits===<br />
* No mendel kits are for sale yet but when they become available please list them here.<br />
===Electrical and mechanical kits and parts===<br />
* [http://makerbot.com/ Makerbot] - seller of fully assembled/parts kits/pcb-only kits for RepRap Generation 3 electronics and plastruder parts.<br />
* [http://www.bitsfrombytes.com/ Bits from Bytes] - seller of plastic filament and alternative (non RepRap standard) electronics.<br />
* [http://www.reprapsource.com/ RepRap Source] - seller of plastic filament, older generation PCBs, and mechanical parts.<br />
* [http://www.iprint3d.org/ iPrint3D] - seller of RepRap Generation 3 electronics<br />
<br />
* [http://parts.reprap.org/ RepRap Parts Lister] - generates shopping lists for a couple different stores. Currently limited to the Gen 3 electronics.<br />
<br />
===Reprapped Parts Kits===<br />
* No mendel kits are for sale yet but when they become available please list them here.<br />
<br />
==Non-kit Mendel Parts Suppliers==<br />
<br />
*[[Suppliers/Stepping Motors]]<br />
<br />
===Electrical===<br />
* [http://www.digikey.com/ digikey US] - '''(online)'''<br />
* [http://www.digikey.ca/ digikey Canada] - '''Canada (online)'''<br />
* [http://mouser.com Mouser] - '''online'''<br />
<br />
===Mechanical===<br />
* [http://www.mcmaster.com/ McMaster-Carr] - '''ships to US addresses only (online)''' - one stop supplier for all the non-RR mechanical parts of Mendel.<br />
* [http://www.fastenal.com/web/home.ex Fastenal] - '''Canada and US (stores/online)''' - supplies all non-RR mechanical parts except for the drive belts.<br />
* [http://www.sdp-si.com/web/html/products.htm SDP/SI] - '''Canada (online)''' - supplies non-RR mechanical parts including drive belts (unknown if they supply all non-RR parts or not).<br />
<br />
==Printing Materials Suppliers==<br />
For ABS/PLA/Etc. suppliers see [[Printing Material Suppliers]]<br />
<br />
==For-Sale Forum==<br />
* RepRap parts are also listed for sale on the [http://forums.reprap.org/list.php?94 RepRap For-Sale Forum]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D0%BF%D0%BE%D0%BA%D1%83%D0%BF%D0%BA%D0%B5&diff=13432RepRap II "Мендель" Инструкция по покупке2010-03-17T20:40:31Z<p>Senyor: /* For Sale Forum */</p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
Документация по созданию RepRap II "Мендель" доступна каждому (открыта и предоставляется безвозмездно), поэтому нельзя однозначно сказать, где машину можно приобрести. Поэтому существует множество вариантов. Поскольку машина все время улучшается, цены на изготовление снижаются. Далее в списке Вы можете найти места, где приобрести отдельные части и/или наборы для изготовления "Менделя".<br />
<br />
Список доступных в настоящее время компонентов "Менделя" и поставщиков доступен [[Mendel_assembly_data_sheet |по этой ссылке]]. <br />
<br />
'''Заметка:''' Не обязательно приобретать набор, многие [[:Category:Mendel RepStrap|RepStrap'ы]] Вы можете купить или изготовить из уже имеющихся у Вас в наличии инструментов и материалов.<br />
<br />
==Форум Продаж==<br />
<br />
Мы поддерживаем форум [http://dev.forums.reprap.org/index.php?93 For Sale/Wanted Forum] (на англ.), на котором люди, имеющие наборы компонентов RepRap могут могут размещать объявления о продаже. А те, кто хочет приобрести, размещают запросы на покупку. ''Caveat emptor'' - мы пытаемся оградить Вас от влияния мошенников, однако форум открыт для всех желающих. Не пересылайте деньги, пока Вы не удостоверитесь в благонадежности адресата.<br />
<br />
==Fully Assembled Mendel Kits==<br />
* No mendel kits are for sale yet but when they become available please list them here.<br />
<br />
==Mendel Parts Kits==<br />
===Full Kits===<br />
* No mendel kits are for sale yet but when they become available please list them here.<br />
===Electrical and mechanical kits and parts===<br />
* [http://makerbot.com/ Makerbot] - seller of fully assembled/parts kits/pcb-only kits for RepRap Generation 3 electronics and plastruder parts.<br />
* [http://www.bitsfrombytes.com/ Bits from Bytes] - seller of plastic filament and alternative (non RepRap standard) electronics.<br />
* [http://www.reprapsource.com/ RepRap Source] - seller of plastic filament, older generation PCBs, and mechanical parts.<br />
* [http://www.iprint3d.org/ iPrint3D] - seller of RepRap Generation 3 electronics<br />
<br />
* [http://parts.reprap.org/ RepRap Parts Lister] - generates shopping lists for a couple different stores. Currently limited to the Gen 3 electronics.<br />
<br />
===Reprapped Parts Kits===<br />
* No mendel kits are for sale yet but when they become available please list them here.<br />
<br />
==Non-kit Mendel Parts Suppliers==<br />
<br />
*[[Suppliers/Stepping Motors]]<br />
<br />
===Electrical===<br />
* [http://www.digikey.com/ digikey US] - '''(online)'''<br />
* [http://www.digikey.ca/ digikey Canada] - '''Canada (online)'''<br />
* [http://mouser.com Mouser] - '''online'''<br />
<br />
===Mechanical===<br />
* [http://www.mcmaster.com/ McMaster-Carr] - '''ships to US addresses only (online)''' - one stop supplier for all the non-RR mechanical parts of Mendel.<br />
* [http://www.fastenal.com/web/home.ex Fastenal] - '''Canada and US (stores/online)''' - supplies all non-RR mechanical parts except for the drive belts.<br />
* [http://www.sdp-si.com/web/html/products.htm SDP/SI] - '''Canada (online)''' - supplies non-RR mechanical parts including drive belts (unknown if they supply all non-RR parts or not).<br />
<br />
==Printing Materials Suppliers==<br />
For ABS/PLA/Etc. suppliers see [[Printing Material Suppliers]]<br />
<br />
==For-Sale Forum==<br />
* RepRap parts are also listed for sale on the [http://forums.reprap.org/list.php?94 RepRap For-Sale Forum]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D0%BF%D0%BE%D0%BA%D1%83%D0%BF%D0%BA%D0%B5&diff=13431RepRap II "Мендель" Инструкция по покупке2010-03-17T20:30:42Z<p>Senyor: </p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
<br />
Документация по созданию RepRap II "Мендель" доступна каждому (открыта и предоставляется безвозмездно), поэтому нельзя однозначно сказать, где машину можно приобрести. Поэтому существует множество вариантов. Поскольку машина все время улучшается, цены на изготовление снижаются. Далее в списке Вы можете найти места, где приобрести отдельные части и/или наборы для изготовления "Менделя".<br />
<br />
Список доступных в настоящее время компонентов "Менделя" и поставщиков доступен [[Mendel_assembly_data_sheet |по этой ссылке]]. <br />
<br />
'''Заметка:''' Не обязательно приобретать набор, многие [[:Category:Mendel RepStrap|RepStrap'ы]] Вы можете купить или изготовить из уже имеющихся у Вас в наличии инструментов и материалов.<br />
<br />
==For Sale Forum==<br />
<br />
We run a [http://dev.forums.reprap.org/index.php?93 For Sale/Wanted Forum] where people who have sets of RepRap parts for sale can advertise the fact and others can post requests to buy. ''Caveat emptor'' - we try to keep complete rogues and con artists off this forum, but it is open to the entire planet. Don't send money unless you're confident that you know what you're doing.<br />
<br />
==Fully Assembled Mendel Kits==<br />
* No mendel kits are for sale yet but when they become available please list them here.<br />
<br />
==Mendel Parts Kits==<br />
===Full Kits===<br />
* No mendel kits are for sale yet but when they become available please list them here.<br />
===Electrical and mechanical kits and parts===<br />
* [http://makerbot.com/ Makerbot] - seller of fully assembled/parts kits/pcb-only kits for RepRap Generation 3 electronics and plastruder parts.<br />
* [http://www.bitsfrombytes.com/ Bits from Bytes] - seller of plastic filament and alternative (non RepRap standard) electronics.<br />
* [http://www.reprapsource.com/ RepRap Source] - seller of plastic filament, older generation PCBs, and mechanical parts.<br />
* [http://www.iprint3d.org/ iPrint3D] - seller of RepRap Generation 3 electronics<br />
<br />
* [http://parts.reprap.org/ RepRap Parts Lister] - generates shopping lists for a couple different stores. Currently limited to the Gen 3 electronics.<br />
<br />
===Reprapped Parts Kits===<br />
* No mendel kits are for sale yet but when they become available please list them here.<br />
<br />
==Non-kit Mendel Parts Suppliers==<br />
<br />
*[[Suppliers/Stepping Motors]]<br />
<br />
===Electrical===<br />
* [http://www.digikey.com/ digikey US] - '''(online)'''<br />
* [http://www.digikey.ca/ digikey Canada] - '''Canada (online)'''<br />
* [http://mouser.com Mouser] - '''online'''<br />
<br />
===Mechanical===<br />
* [http://www.mcmaster.com/ McMaster-Carr] - '''ships to US addresses only (online)''' - one stop supplier for all the non-RR mechanical parts of Mendel.<br />
* [http://www.fastenal.com/web/home.ex Fastenal] - '''Canada and US (stores/online)''' - supplies all non-RR mechanical parts except for the drive belts.<br />
* [http://www.sdp-si.com/web/html/products.htm SDP/SI] - '''Canada (online)''' - supplies non-RR mechanical parts including drive belts (unknown if they supply all non-RR parts or not).<br />
<br />
==Printing Materials Suppliers==<br />
For ABS/PLA/Etc. suppliers see [[Printing Material Suppliers]]<br />
<br />
==For-Sale Forum==<br />
* RepRap parts are also listed for sale on the [http://forums.reprap.org/list.php?94 RepRap For-Sale Forum]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=RepRap_II_%22%D0%9C%D0%B5%D0%BD%D0%B4%D0%B5%D0%BB%D1%8C%22_%D0%98%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BA%D1%86%D0%B8%D1%8F_%D0%BF%D0%BE_%D0%BF%D0%BE%D0%BA%D1%83%D0%BF%D0%BA%D0%B5&diff=13430RepRap II "Мендель" Инструкция по покупке2010-03-17T20:29:54Z<p>Senyor: </p>
<hr />
<div>{{RepRapNavigationRu|name=RepRap II "Мендель"}}<br />
{{merge|Canada/Suppliers}}<br />
<br />
Документация по созданию RepRap II "Мендель" доступна каждому (открыта и предоставляется безвозмездно), поэтому нельзя однозначно сказать, где машину можно приобрести. Поэтому существует множество вариантов. Поскольку машина все время улучшается, цены на изготовление снижаются. Далее в списке Вы можете найти места, где приобрести отдельные части и/или наборы для изготовления "Менделя".<br />
<br />
Список доступных в настоящее время компонентов "Менделя" и поставщиков доступен [[Mendel_assembly_data_sheet |по этой ссылке]]. <br />
<br />
'''Заметка:''' Не обязательно приобретать набор, многие [[:Category:Mendel RepStrap|RepStrap'ы]] Вы можете купить или изготовить из уже имеющихся у Вас в наличии инструментов и материалов.<br />
<br />
==For Sale Forum==<br />
<br />
We run a [http://dev.forums.reprap.org/index.php?93 For Sale/Wanted Forum] where people who have sets of RepRap parts for sale can advertise the fact and others can post requests to buy. ''Caveat emptor'' - we try to keep complete rogues and con artists off this forum, but it is open to the entire planet. Don't send money unless you're confident that you know what you're doing.<br />
<br />
==Fully Assembled Mendel Kits==<br />
* No mendel kits are for sale yet but when they become available please list them here.<br />
<br />
==Mendel Parts Kits==<br />
===Full Kits===<br />
* No mendel kits are for sale yet but when they become available please list them here.<br />
===Electrical and mechanical kits and parts===<br />
* [http://makerbot.com/ Makerbot] - seller of fully assembled/parts kits/pcb-only kits for RepRap Generation 3 electronics and plastruder parts.<br />
* [http://www.bitsfrombytes.com/ Bits from Bytes] - seller of plastic filament and alternative (non RepRap standard) electronics.<br />
* [http://www.reprapsource.com/ RepRap Source] - seller of plastic filament, older generation PCBs, and mechanical parts.<br />
* [http://www.iprint3d.org/ iPrint3D] - seller of RepRap Generation 3 electronics<br />
<br />
* [http://parts.reprap.org/ RepRap Parts Lister] - generates shopping lists for a couple different stores. Currently limited to the Gen 3 electronics.<br />
<br />
===Reprapped Parts Kits===<br />
* No mendel kits are for sale yet but when they become available please list them here.<br />
<br />
==Non-kit Mendel Parts Suppliers==<br />
<br />
*[[Suppliers/Stepping Motors]]<br />
<br />
===Electrical===<br />
* [http://www.digikey.com/ digikey US] - '''(online)'''<br />
* [http://www.digikey.ca/ digikey Canada] - '''Canada (online)'''<br />
* [http://mouser.com Mouser] - '''online'''<br />
<br />
===Mechanical===<br />
* [http://www.mcmaster.com/ McMaster-Carr] - '''ships to US addresses only (online)''' - one stop supplier for all the non-RR mechanical parts of Mendel.<br />
* [http://www.fastenal.com/web/home.ex Fastenal] - '''Canada and US (stores/online)''' - supplies all non-RR mechanical parts except for the drive belts.<br />
* [http://www.sdp-si.com/web/html/products.htm SDP/SI] - '''Canada (online)''' - supplies non-RR mechanical parts including drive belts (unknown if they supply all non-RR parts or not).<br />
<br />
==Printing Materials Suppliers==<br />
For ABS/PLA/Etc. suppliers see [[Printing Material Suppliers]]<br />
<br />
==For-Sale Forum==<br />
* RepRap parts are also listed for sale on the [http://forums.reprap.org/list.php?94 RepRap For-Sale Forum]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=Mendel_mechanical_construction/ru&diff=7882Mendel mechanical construction/ru2010-03-16T18:17:59Z<p>Senyor: </p>
<hr />
<div>{{Template:Mendel Documentation Header Ru|Изготовление и сборка механики}}<br />
<br />
[[Image:Mendel GA axes designation.JPEG|350px|right|General assembly of Mendel]]<br />
These pages will show you how to build the mechanical structure of RepRap Version II "Mendel". Check out the [[Mendel Overview|overview]] to get a fast introduction to Mendel's design. The [[Mendel assembly data sheet]] has been designed to provide all the procurement and assembly data you need, and can be relied upon if you prefer not to follow instructions. However, it's recommended that you do assembly in the order of the list below.<br />
<br />
# [[Mendel Overview|Overview]] <br />
# [[Mendel solid model files|Mendel solid model files]]<br />
# [[Mendel materials procurement|Procurement]]<br />
# [[Mendel materials preparation|Preparation of materials]] <br />
# [[Mendel assembly notes|Assembly notes]] <br />
# [[Mendel extruder|Extruder]] <br />
# [[Mendel X-axis|X-axis]] <br />
# [[Mendel Z-axis|Z-axis]] <br />
# [[Mendel Y-axis|Y-axis]] <br />
# [[Mendel circuit boards|Circuit board attachment]] <br />
# [[Mendel frame|Frame]] <br />
# [[Mendel squaring axes|Squaring the axes]]</div>Senyorhttps://reprap.org/mediawiki/index.php?title=Template:Build_Documentation_Header_Ru&diff=7881Template:Build Documentation Header Ru2010-03-16T18:15:56Z<p>Senyor: </p>
<hr />
<div>{{notice2|Разработка документации [[{{{1}}}]]<br />
|<div>{{{2}}}</div><br />
<div>{{{{{3}}}/{{{4|}}}}}</div><br />
}}<br />
<br/><noinclude><br />
==Примеры==<br />
===Страница верхнего уровня===<br />
====Вики-разметка====<br />
<pre>{{Mendel Documentation Header Ru}}</pre><br />
====Результат====<br />
{{Mendel Documentation Header Ru}}<br />
===Страница второго уровня===<br />
====Вики-разметка====<br />
'''''TODO''''' <pre>{{Mendel Documentation Header Ru|Mechanical Construction}}</pre><br />
====Result====<br />
{{Mendel Documentation Header Ru|Изготовление и сборка механики}}<br />
<br />
[[Category:Template:Build Documentation Header Ru]]<br />
</noinclude></div>Senyor