https://reprap.org/mediawiki/api.php?action=feedcontributions&user=Pablog&feedformat=atom
RepRap - User contributions [en]
2024-03-28T09:46:15Z
User contributions
MediaWiki 1.30.0
https://reprap.org/mediawiki/index.php?title=Clone_wars:_Printrbot&diff=102656
Clone wars: Printrbot
2013-08-20T00:24:44Z
<p>Pablog: fix some links</p>
<hr />
<div>[[File:PrintrBot_Logo.png|right|200px]]<br />
<br />
== Piezas imprimibles ==<br />
<br />
Todas las piezas se han diseñado con '''Google's SketchUP'''. Los ficheros están disponibles en [http://www.thingiverse.com/thing:16990 la página de Thingiverse]<br />
<br />
=== Estructura completa ===<br />
<br />
* (*) La columna Original hace referencia a la primera versión colgada por Brook (creador de la Printrbot) en Thingiverse de forma abierta.<br />
* (**) La columna V2 hace referencia a mejoras en las piezas originales colgada por Brook (creador de la Printrbot) en Thingiverse de forma abierta.<br />
* (***) La columna Métrica hace referencia a la adaptación de las piezas a medidas métricas realizadas por César A. Fdez.<br />
<br />
{| class="wikitable" <br />
! Imagen !! Original(STL)* !! V2(STL)** !! Métrica(STL)*** !! Cantidad !! Tiempo impresión!! Comentarios<br />
|- align="center"<br />
| [[File:Pb-base.png|100px]]<br />
| [http://svn.iearobotics.com/printrbot/STL/01-pb-Base-x1.stl Base]<br />
| [http://svn.iearobotics.com/printrbot/STL/01-pb-Base-x1_v2.stl Base] <br />
| [http://svn.iearobotics.com/printrbot/STL/01-pbm-Base-x1.stl Base]<br />
| 2<br />
| 1 h 33 min<br />
| Bases de la Printrbot<br />
<br />
|- align="center"<br />
| [[File:Pb_X_Motor.png|100px]]<br />
| [http://svn.iearobotics.com/printrbot/STL/02-pb-X-Motor-x1.stl X-Motor]<br />
| ------------- <br />
| -------------<br />
| 1<br />
| 1h 38min<br />
| Enganche para el motor del eje x<br />
<br />
|- align="center"<br />
| [[File:pbm_X_Motor-v2.png|100px]]<br />
| -------------<br />
| [http://svn.iearobotics.com/printrbot/STL/02-pb-X-Motor-x1_v2.stl X-Motor]<br />
| [http://svn.iearobotics.com/printrbot/STL/02-pbm-X-Motor-x1_v2.stl X-Motor]<br />
| 1<br />
| 1h 38min<br />
| Enganche para el motor del eje x<br />
<br />
|- align="center"<br />
| [[File:Pb_X_idler.png|100px]]<br />
| [http://svn.iearobotics.com/printrbot/STL/03-pb-X-Idler-x1.stl X Idler]<br />
| ------------- <br />
| [http://svn.iearobotics.com/printrbot/STL/03-pbm-X-Idler-x1.stl X Idler]<br />
| 1<br />
| 1 h 18 min<br />
| Extremo del eje x<br />
<br />
|- align="center"<br />
| [[File:Pb_X_carriage.png|100px]]<br />
| [http://svn.iearobotics.com/printrbot/STL/04-pb-X-Carriage-x1.stl X Carriage]<br />
| [http://svn.iearobotics.com/printrbot/STL/04-pb-V2-X-Carriage-x1.stl X-Carriage] <br />
| [http://svn.iearobotics.com/printrbot/STL/04-pbm-X-Carriage-x1_v2.stl X Carriage] <br />
| 1<br />
| 1h 9min<br />
| Carro del eje X<br />
<br />
|- align="center"<br />
| [[File:Pb_Xtruder_mount.png|100px]]<br />
| [http://svn.iearobotics.com/printrbot/STL/05-pb-Xtruder-Mount-x1.stl Xtruder Mount]<br />
| ------------- <br />
| ------------- <br />
| 1<br />
| 42 min<br />
| Soporte para el extrusor<br />
<br />
|- align="center"<br />
| [[File:pbm_Xtruder_mount-v2.png|100px]]<br />
| ------------- <br />
| [http://svn.iearobotics.com/printrbot/STL/05-pb-Xtruder-Mount-x1_v2.stl Xtruder Mount]<br />
| [http://svn.iearobotics.com/printrbot/STL/05-pbm-Xtruder-Mount-x1_v2.stl Xtruder Mount]<br />
| 1<br />
| 42 min<br />
| Soporte para el extrusor<br />
<br />
|- align="center"<br />
| [[File:Y_barEnd.png|100px]]<br />
| [http://svn.iearobotics.com/printrbot/STL/06-pb-Y-BarEnd-x4.stl Y Bar End]<br />
| ------------- <br />
| [http://svn.iearobotics.com/printrbot/STL/06-pbm-Y-BarEnd-x4.stl Y Bar End]<br />
| 4<br />
| 24 min<br />
| Extremos para las barras del eje Y<br />
<br />
|- align="center"<br />
| [[File:Pb-y-end-endstop.png|100px]]<br />
| xxxx<br />
| [http://svn.iearobotics.com/printrbot/STL/06-pb_V2_y_BarEnd-x1.stl Y Bar End End-Stop]<br />
| xxx<br />
| 1<br />
| xx<br />
| Extremo para las barras del eje Y. Taladro para tornillo para dar en el final de carrera<br />
<br />
<br />
|- align="center"<br />
| [[File:Y-bearing_guide.png|100px]]<br />
| [http://svn.iearobotics.com/printrbot/STL/07-pb-Y-Bearing-Guide-x1.stl Bearing Guide]<br />
| ------------- <br />
| [http://svn.iearobotics.com/printrbot/STL/07-pbm-Y-Bearing-Guide-x1.stl Bearing Guide]<br />
| 1<br />
| 13 min<br />
| Guia para los rodamientos del eje Y<br />
<br />
|- align="center"<br />
| [[File:BeltClip.png|100px]]<br />
| [http://svn.iearobotics.com/printrbot/STL/08-pb-BeltClip-x2.stl Belt Clip]<br />
| ------------- <br />
| [http://svn.iearobotics.com/printrbot/STL/08-pbm-BeltClip-x2.stl Belt Clip]<br />
| 2<br />
| 21 min<br />
| Pinza de correa<br />
<br />
|- align="center"<br />
| [[File:Y idler.png|100px]]<br />
| xxxxxx<br />
| xxxxxx<br />
| [http://svn.iearobotics.com/printrbot/STL/Y_idler.stl Y idler]<br />
| 1<br />
| xxxx <br />
| Soporte para rodamientos Eje Y<br />
<br />
|- align="center"<br />
| [[File:Pb-z-endstop.png|100px]]<br />
| xxxxxx<br />
| [http://svn.iearobotics.com/printrbot/STL/11-pb-V2-z-endstop.stl Z-endstop]<br />
| xxxx<br />
| 1<br />
| xxxx <br />
| Adaptador para el final de carrera del eje z<br />
<br />
|}<br />
<br />
=== Otras piezas necesarias de la Prusa 2 ===<br />
<br />
{| class="wikitable" <br />
! Imagen !! Pieza (STL) !! Cantidad !! Tiempo impresión!! Comentarios<br />
|- align="center"<br />
| [[File:PI2-coupling.png|100px]]<br />
| [http://asrob.uc3m.es/svn/ASROBrepo/3DP/Clon-wars/Prusa-iteration-2/Parts-stl/15-coupling-x2.stl coupling]<br />
| 2<br />
| 24 min<br />
| Acoplamiento<br />
|- align="center"<br />
| [[File:PI2-pulley.png|100px]]<br />
| [http://asrob.uc3m.es/svn/ASROBrepo/3DP/Clon-wars/Prusa-iteration-2/Parts-stl/06-pulley-x2.stl pulley]<br />
| 2<br />
| 14 min<br />
| Polea para los motores x,y<br />
|- align="center"<br />
| [[File:Bearing-guide.png|100px]]<br />
| [http://asrob.uc3m.es/svn/ASROBrepo/3DP/Clon-wars/Prusa-iteration-2/Parts-stl/09-bearing-guide-x3.stl Bearing guide]<br />
| 1<br />
| 8 min<br />
| Guía de rodamiento<br />
|}<br />
<br />
=== Extrusor: Greg's extruder ===<br />
<br />
{| class="wikitable" <br />
! Imagen !! Pieza (STL) !! Cantidad !! Tiempo impresión!! Comentarios<br />
|- align="center"<br />
| [[File:Wade-body.png|100px]]<br />
| [http://asrob.uc3m.es/svn/ASROBrepo/3DP/Clon-wars/Prusa-iteration-2/Parts-stl/17-wade_body-x1.stl wade_body-x1.stl]<br />
| 1<br />
| 1h y 30 min<br />
| Pieza principal del extrusor<br />
|- align="center"<br />
| [[File:Wade-idler.png|100px]]<br />
| [http://asrob.uc3m.es/svn/ASROBrepo/3DP/Clon-wars/Prusa-iteration-2/Parts-stl/18-wade-idler-x1.stl wade idler]<br />
| 1<br />
| 23 min<br />
| Pieza lateral atornillada al cuerpo del extrusor <br />
|- align="center"<br />
| [[File:Wade-big-gear.png|100px]]<br />
| [http://asrob.uc3m.es/svn/ASROBrepo/3DP/Clon-wars/Prusa-iteration-2/Parts-stl/19-wade-big.stl wade-big.stl]<br />
| 1<br />
| 37 min<br />
| Engranaje grande<br />
|- align="center"<br />
| [[File:Wade-small-gear.png|100px]]<br />
| [http://asrob.uc3m.es/svn/ASROBrepo/3DP/Clon-wars/Prusa-iteration-2/Parts-stl/20-wade-small.stl wade-small.stl]<br />
| 1<br />
| 14 min<br />
| Engranaje pequeño<br />
|}<br />
<br />
=== Extrusor: Jonaskuehling Greg's Wade Reloaded ===<br />
<br />
* [http://www.thingiverse.com/thing:18379 Extrusor en thingiverse]: Fotos, instrucciones, fuentes...<br />
<br />
{| class="wikitable" <br />
! Imagen !! Pieza (STL) !! Cantidad !! Tiempo impresión!! Comentarios<br />
|- align="center"<br />
| [[File:Jonas-body.png|100px]]<br />
| [http://asrob.uc3m.es/svn/ASROBrepo/3DP/Clon-wars/Extruder/Jonaskuehling/stl/jonaskuehling_gregs-wade-v3_arcol_jhead.stl jonaskuehling_gregs-wade-v3_arcol_jhead]<br />
| 1<br />
| 2h 3 min<br />
| Piezas del cuerpo del extrusor. STL para los extrusores Jhead, Arcol y Budas<br />
|- align="center"<br />
| [[File:Jonas-big-gear.png|100px]]<br />
| [http://asrob.uc3m.es/svn/ASROBrepo/3DP/Clon-wars/Extruder/Jonaskuehling/stl/biggearmod_fixed.stl biggearmod_fixed.stl]<br />
| 1<br />
| 1h 4 min<br />
| Engranaje grande<br />
|- align="center"<br />
| [[File:Jonas-small-gear.png|100px]]<br />
| [http://asrob.uc3m.es/svn/ASROBrepo/3DP/Clon-wars/Extruder/Jonaskuehling/stl/smallgearmod_fixed.stl smallgearmod_fixed.stl]<br />
| 1<br />
| 17 min<br />
| Engranaje pequeño<br />
|- align="center"<br />
|}<br />
<br />
=== Fotos ===<br />
<br />
* Juego de piezas de referencia:<br />
{| class="wikitable"<br />
|- <br />
| [[File:DSC04508.JPG|thumb|400px|Las piezas de una Printrbot, impresas por R2 (''Click para ampliar'') ]]<br />
|}<br />
<br />
== Vitaminas ==<br />
<br />
En el ámbito de las impresoras auto-replicantes (repraps) se denominan vitaminas a todas aquellas partes que '''NO SON IMPRIMIBLES''' y que hay que comprarlas.<br />
Recomendación: '''para los tornillos, tuercas y arandelas, es mejor comprar dos o tres más de cada uno'''. es muy frustrante cuando necesitas un tornillo y no lo tienes por haber comprado cantidades exactas...<br />
<br />
{| class="wikitable" <br />
|- align="center"<br />
! Imagen !!Pieza !! Cantidad !! Precio unidad !! Precio total !! Tiendas !! Comentarios<br />
<br />
|- align="center"<br />
| [[File:Varilla-roscada-r1.jpg|100px]]<br />
| Varilla roscada M8 1m largo<br />
| 2<br />
| 0.80€<br />
| 4.8€<br />
| Ferretería<br />
| Las varillas hay que cortarlas posteriormente<br />
<br />
|- align="center"<br />
| <br />
| Perno M8 70mm de cabeza hexagonal<br />
| 1<br />
| --<br />
| --<br />
| Ferretería<br />
| <br />
<br />
|- align="center"<br />
| <br />
| Tornillos M3 8mm<br />
| 8<br />
| --<br />
| --<br />
| Ferretería<br />
| <br />
<br />
|- align="center"<br />
| <br />
| Tornillos M3 10mm<br />
| 8<br />
| --<br />
| --<br />
| Ferretería<br />
| <br />
<br />
|- align="center"<br />
| <br />
| Tornillos M3 15mm<br />
| 2<br />
| --<br />
| --<br />
| Ferretería<br />
| <br />
<br />
|- align="center"<br />
| <br />
| Tornillos M3 20mm<br />
| 12<br />
| --<br />
| --<br />
| Ferretería<br />
| <br />
<br />
|- align="center"<br />
| <br />
| Tornillos M3 25mm<br />
| 5<br />
| --<br />
| --<br />
| Ferretería<br />
| <br />
<br />
|- align="center"<br />
| <br />
| Tornillos M3 30mm<br />
| 1<br />
| --<br />
| --<br />
| Ferretería<br />
| <br />
<br />
|- align="center"<br />
| <br />
| Tornillos M3 35mm<br />
| 4<br />
| --<br />
| --<br />
| Ferretería<br />
| <br />
<br />
|- align="center"<br />
| <br />
| Tornillos M3 40mm<br />
| 1<br />
| --<br />
| --<br />
| Ferretería<br />
| <br />
<br />
|- align="center"<br />
| <br />
| Tornillos M3 45mm<br />
| 2<br />
| --<br />
| --<br />
| Ferretería<br />
| Estos son para fijar el fusor de RepRapWorld v5 al cuerpo del extrusor<br />
<br />
|- align="center"<br />
| <br />
| Arandelas M3<br />
| 20<br />
| --<br />
| --<br />
| Ferretería<br />
| <br />
<br />
|- align="center"<br />
| <br />
| Tuercas M3<br />
| 29<br />
| --<br />
| --<br />
| Ferretería<br />
| <br />
<br />
|- align="center"<br />
| <br />
| Arandelas M4<br />
| 4<br />
| --<br />
| --<br />
| Ferretería<br />
| Las piezas de M4 son para el mecanismo con muelles del extrusor. He probado con M3 pero no queda tan sólido como con M4...<br />
<br />
|- align="center"<br />
| <br />
| Tornillos M4<br />
| 2<br />
| --<br />
| --<br />
| Ferretería<br />
| <br />
<br />
|- align="center"<br />
| <br />
| Tuercas M4 tipo palomilla<br />
| 2<br />
| --<br />
| --<br />
| Ferretería<br />
| <br />
<br />
|- align="center"<br />
| [[File:Tuerca-M8.jpg|100px]]<br />
| Tuercas M8<br />
| 28<br />
| --<br />
| --<br />
| Ferretería<br />
| <br />
<br />
|- align="center"<br />
| [[File:Arandelas-M8.jpg|100px]]<br />
| Arandelas M8 normales<br />
| 12<br />
| --<br />
| --<br />
| Ferretería<br />
| <br />
<br />
|- align="center"<br />
| [[File:2011-04-12-arandela-M8x30-metal.jpg|100px]]<br />
| Arandelas M8x30<br />
| 2<br />
| --<br />
| --<br />
| [http://es.rs-online.com/web/6667775.html RS]<br />
| También se pueden omitir poniendo guías imprimibles de correa T2.5 en el rodamiento<br />
<br />
|- align="center"<br />
| [[File:DSC04769.JPG|100px]]<br />
| Varillas lisas M8 de acero inoxidable (1m de largo)<br />
| 3<br />
| --<br />
| --<br />
|<br />
* [http://www.novoinox.com/varilla-maciza-redonda/2356-varilla-maciza-8mm-aisi-304l-2b-mate.html Novoinox]: 3.66€ el metro (también las cortan)<br />
| Si se compran por metros, hay que cortarlas posteriormente. Hay proveedores que las venden ya cortadas<br />
<br />
|- align="center"<br />
| [[File:2011-04-11-rodamiento.jpg|100px]]<br />
| Rodamientos 608 zz blindados<br />
| 6<br />
| --<br />
| --<br />
| <br />
* Rodamientos O.M.3 (Alcobendas): 2€ unidad<br />
* [http://es.rs-online.com/web/p/products/6190036/ RS]: 1.9€ unidad<br />
* Decathlon: Pack de 8 a unos 8€<br />
* [http://xyzprinters.com/metals/57-608zz-bearing.html xyzprinters]: 1€<br />
| Son los mismos que se usan en los patines en línea. Se necesinta: 2 para el eje Y, 1 para el x, 3 para el extrusor<br />
<br />
|- align="center"<br />
| [[File:Timing belt.jpg|100px]]<br />
| Correas T2.5 abiertas, 5mm de ancho, 1m de longitud<br />
| 2<br />
| --<br />
| --<br />
| <br />
* [http://xyzprinters.com/belts/157-prusa-t25-optimized-belt-kit.html xyzprinters]: 22€<br />
* [https://shop.grrf.de/timing-belt-kit-t25-p-381.html GRRF]: 20€<br />
* [http://reprapworld.com/?products_details&products_id=175&cPath=1595_1611 RRW]: 9€<br />
| Las correas T5 también son válidas. Son las que se usaban en la Prusa 1, pero con las T2.5 se tiene mayor precisión <br />
<br />
|- align="center"<br />
| [[File:T5-pulley.jpg|100px]]<br />
| Poleas T2.5 metálicas o de SLS<br />
| 2<br />
| --<br />
| --<br />
| <br />
* [http://xyzprinters.com/metals/172-t5-pulley.html xyzprinters]: 9.30€ la unidad<br />
* [https://shop.grrf.de/alu-pully-t25-p-382.html GRRF]: 9€ la unidad<br />
* [http://www.reprapbcn.com/catalog/index.php/sls-parts/sls-t2-5-pulley.html Reprapbcn]: 2€ unidad (SLS)<br />
| También se pueden imprimir, pero tiene que ser con una boquilla de 0.35mm<br />
<br />
|- align="center"<br />
| [[File:Rodamiento_Lineal_LM8UU_.jpg|100px]]<br />
| Rodamiento lineal LM8UU<br />
| 12<br />
| 1,19€<br />
| 14,28€<br />
| [http://reprapworld.com/?products_details&products_id=151&cPath=1595_1596 ReprapWorld]<br />
| <br />
<br />
|- align="center"<br />
| <br />
| Bridas de Nylon 50 ud.<br />
| 1<br />
| --<br />
| 5€<br />
| Ferretería<br />
| <br />
<br />
|- align="center"<br />
| <br />
| Lubricante industrial<br />
| 1<br />
| --<br />
| 8€<br />
| Ferretería<br />
| <br />
<br />
|- align="center"<br />
| <br />
| Masilla refractaria (resistente hasta 1200ºC)<br />
| 1<br />
| --<br />
| 6€<br />
| Ferretería<br />
| <br />
<br />
|- align="center"<br />
| <br />
| Pinza de papel pequeña (2cm)<br />
| 6<br />
| --<br />
| 1€<br />
| Ferretería/Papelería<br />
| <br />
<br />
|- align="center"<br />
| <br />
| Cinta adhesiva de Kapton (33M) 20cm<br />
| 1<br />
| --<br />
| 26€<br />
| [http://www.ebay.com/sch/sis.html?_kw=1+High+Temperature+Resistant+Kapton+Tape+200mm Disponible en eBay]<br />
| <br />
<br />
|- align="center"<br />
| <br />
| Tablero de MDF 5mm 25x32cm <br />
| 1<br />
| --<br />
| --<br />
| Ferretería/Almacén maderas y tableros<br />
| <br />
<br />
|- align="center"<br />
| <br />
| Muelle pequeño (20x5mm), vale con que deslize en los tornillos M4<br />
| 2<br />
| --<br />
| --<br />
| Puede que tengan alguno válido en una ferretería<br />
| <br />
<br />
|- align="center"<br />
| [[File:Motor-pap.png|100px]]<br />
| Motores paso a paso Nema 17<br />
| 5<br />
| --<br />
| --<br />
| <br />
* [http://xyzprinters.com/electronics/89-stepper-motor.html xyzprinters]: 16€ la unidad<br />
* [http://reprapworld.com/?products_details&products_id=94&cPath=1614 RRW]: 12.5€ la unidad (x5)<br />
| 1 para el eje x, 1 para el eje y, 2 para el eje z, 1 para el extrusor<br />
<br />
|}<br />
<br />
<br />
=== Varillas roscadas ===<br />
<br />
{| class="wikitable"<br />
|-<br />
|[[File:2011-04-09-varillas-cortadas-3.jpg|200px|Varillas roscadas]]<br />
|<br />
Se necesitan '''6 varillas''', de los siguientes tamaños:<br />
* 4 x 320mm para la base<br />
* 2 x 250mm para el eje Z (Nota: a mayor longitud, mayor volumen de impresión)<br />
<br />
Nota: estas longitudes son las usadas por Carlos García Saura para un volumen de trabajo de 20x20x21 cm.<br />
<br />
Si queremos adoptar las medidas originales, las longitudes serían las siguientes:<br />
* 4 x 280mm para la base<br />
* 2 x 240mm para el eje Z (Nota: a mayor longitud, mayor volumen de impresión)<br />
<br />
Nota: estas longitudes son adaptadas a partir de las usadas por Carlos García Saura para un volumen de trabajo de 16x16x20 cm.<br />
<br />
Además, se necesita un trozo de unos 40mm de lo que sobre, para montar el rodamiento del eje X.<br />
|}<br />
<br />
=== Varillas Lisas ===<br />
<br />
{| class="wikitable"<br />
|-<br />
|[[File:DSC04768.JPG|200px|Varillas lisas de 420, 406 y 350 mm]]<br />
|<br />
Se necesitan '''6 varillas''', de los siguientes tamaños:<br />
* 2 x 330mm para el eje X (Nota: procurad que ambas barras sean sensiblemente iguales)<br />
* 2 x 310mm para el eje Y<br />
* 2 x 350mm para el eje Z (Nota: a mayor longitud, mayor volumen de impresión)<br />
<br />
Nota: estas longitudes son las usadas por Carlos García Saura para un volumen de trabajo de 20x20x21 cm.<br />
<br />
Si queremos adoptar las medidas originales, las longitudes serían las siguientes:<br />
* 2 x 290mm para el eje X<br />
* 2 x 270mm para el eje Y<br />
* 2 x 340mm para el eje Z (Nota: a mayor longitud, mayor volumen de impresión)<br />
<br />
Nota: estas longitudes son adaptadas a partir de las usadas por Carlos García Saura para un volumen de trabajo de 16x16x20 cm.<br />
<br />
Además, se necesita un trozo de 20mm de lo que sobre, para montar el rodamiento que aprieta el plástico en el extrusor.<br />
|}<br />
<br />
== Instrucciones ==<br />
<br />
'''Arduteka''' está desarrollando una serie de tutoriales en Español donde aparecen todos los materiales necesarios, y donde van ubicados cada uno.<br />
* [http://www.arduteka.com/2012/11/como-hacerte-una-impresora-3d-printrbot/ Como construir una PrintrBot desde cero by ARDUTEKA]<br />
<br />
Existen una serie de vídeos de montaje que ha realizado Brook sobre el montaje de la Printrbot<br />
<br />
* [http://www.youtube.com/playlist?list=PLDEB12F986EC83054&feature=plcp Lista de reproducción de Youtube], por Brook Drumm<br />
<br />
Esta lista de reproducción de vídeo dura unas 2 horas y media.<br />
<br />
Una buena alternativa es seguir el tutorial que '''Carlos garcía''' está realizando sobre el montaje de la versión métrica:<br />
<br />
* [http://carlosgs.es/node/Building-a-Printrbot-3D-Printer-Part-1-Overview Building a Printrbot 3D Printer Part 1 Overview]<br />
<br />
En la página de Printrbot han publicado un material muy interesante para ayudar en el montaje y puesta en marcha de la impresora:<br />
<br />
* [http://printrbot.com/wp-content/uploads/2012/04/Printrbot-Getting-Started-Guide2.pdf Getting Started Guide]<br />
* [http://printrbot.com/wp-content/uploads/2012/04/1004-01-REV-D-PRINTRBOT-ASM.pdf Printrbot Assembly Diagrams]<br />
* [http://printrbot.com/wp-content/uploads/2012/04/1026-02-Rev-A-EXTRUDER-ASSEMBLY-WO-MOUNT.pdf Extruder Assembly Diagrams]<br />
<br />
El Software empleado es el siguiente:<br />
<br />
* [http://koti.kapsi.fi/~kliment/printrun/ Pronterface para Mac o Windows]<br />
* [http://slic3r.org/ Slic3r]<br />
<br />
== Repositorio ==<br />
* [http://svn.iearobotics.com/printrbot/ http://svn.iearobotics.com/printrbot/]<br />
<br />
== Autores ==<br />
* Cesar Augusto Fernández<br />
* [http://www.iearobotics.com/wiki/index.php?title=Juan_Gonzalez:Main Juan González Gómez]<br />
* [http://carlosgs.es/ Carlos García Saura]<br />
<br />
== Enlaces ==<br />
<br />
* [http://www.printrbottalk.com/forum/ Foros de printrbot]<br />
* [http://www.printrbottalk.com/wiki/index.php?title=Main_Page wiki de printrbot], creado por la comunidad<br />
* [http://printrbot.com/ Printrbot], página oficial<br />
* [http://reprap.org/wiki/Printrbot Printrbot], en la wiki de Reprap<br />
* [http://www.thingiverse.com/thing:16990 Printrbot en thingiverse]<br />
* [http://www.flickr.com/photos/printrbot/sets/72157628821699187/ Fotos del montaje]<br />
{| class="wikitable"<br />
|-<br />
|<br />
[[File:Clone-Wars-logo.png|border|100px|link=Proyecto Clone Wars]]<br />
| [[Proyecto Clone Wars]]<br />
|}<br />
<br />
<br />
[[Category:Clone wars/es]]</div>
Pablog
https://reprap.org/mediawiki/index.php?title=Proyecto_Clone_Wars&diff=74039
Proyecto Clone Wars
2012-12-06T14:27:59Z
<p>Pablog: /* Enlaces */</p>
<hr />
<div>[[File:Clone-Wars-logo.png|thumb|250px]]<br />
<br />
== Introducción ==<br />
<br />
"''oh! Máquinas haciendo máquinas''"-- C3PO<br />
<br />
<br />
* Objetivo: [http://www.reprap.org/wiki/Proyecto_Clone_Wars "imprimir" impresoras 3D], aprender a construirlas, ayudar a otros e intercambiar información y experiencias.<br />
<br />
* '''¡Quiero construir mi impresora 3D! ¿Qué hago?'''<br />
<br />
# Apúntate a la [http://groups.google.com/group/asrob-uc3m-impresoras-3d lista de correo] (Es abierta, cualquiera se puede apuntar o dar de baja cuando quiera)<br />
# Envía un mensaje de presentación, para saber que eres nuevo. No olvides decirnos tu nombre y de dónde eres<br />
# Créate una cuenta en la wiki de Reprap. ''Con fines estadísticos e identificativos la nomenclatura de los nombres de usuarios para la cuenta del wiki de RepRap es la siguiente: Letra inicial de tu nombre en mayúscula, seguido de tu primer nombre en minúscula y finalizar el nombre con '''CW''' (de CloneWars) Ejemplo: '''Vicente Prusa''' quiere darse de alta en la wiki. Dará en el alta como nombre de usuario: '''VprusaCW'''''<br />
# Pon un nombre a tu impresora 3D (clon), busca un logo e inscribe tu clon en la '''categoría de Solicitante'''. En cuanto realices las primeras compras o recibas las piezas impresas ingresarás en la Academia Jedi :-)<br />
<br />
* '''¿Qué modelo de impresora me recomendáis construir?'''<br />
:Te recomendamos que montes la '''[[Clone wars: Prusa Iteración 2|Prusa Iteración 2]] o la [[:Air_2|Air 2]]''', ambas son semejantes, la diferencia es que el marco de la Air2 es de metracrilato y la de la Prusa i2 es de varillas roscadas. La Prusa i2 está muy bien documentada y muy probada, recientemente se han construido muchas Air2 y están dando muy buen resultado. También hay varios clones del tipo '''printrbot''', aunque la documentación todavía no está completa (aunque lo estará en breve). Sin embargo, si eres aventurero, echa un vistazo a la página de '''Clone Wars Labs''', donde estamos experimentando con los nuevos modelos (Prusa3, Rockstock, Prusa Mold...)<br />
<br />
* '''¿Qué presupuesto necesito?'''. Puedes echar un vistazo al [http://www.reprap.org/wiki/Clone_wars:_Prusa_Mendel_original#Presupuesto presupuesto elaborado por Marco Esteban], que hizo para la construcción de la Prusa 1. Este modelo ya está obsoleto, pero te puede servir de orientación. Típicamente el coste está en torno a los '''450€ - 500€''' (aunque lo puedes bajar considerablemente). También puedes visitar las páginas de los clones terminados, donde encontrarás información muy útil. <br />
<br />
* '''¿Cómo consigo las piezas?'''<br />
** Si tienes acceso a una impresora 3D, las puedes imprimir tú mismo. Las Universidades, asociaciones de robótica e Institutos empiezan a tenerlas. <br />
** Si NO tienes acceso a ninguna puedes utilizar nuestro [[Clone Wars Bank|Banco de piezas]]. Apúntate como [[Clone_Wars_Bank#Solicitantes_de_piezas|solicitante de piezas]] para que otro clon te "apadrine" y te imprima las piezas. Pero Recuerda: este apadrinamiento es voluntario. Ningún clon está obligado a imprimírtelas. Intenta contactar a través de la lista con algún clon.<br />
** La tercera opción es que se las compres a alguno de los clones, tiendas o por ebay. En el [[Bazar Jedi|ACCESO AL BAZAR JEDI]] podrás encontrar más información. Para financiarse su impresora, muchos clones están vendiendo juegos de piezas. Tu también podrás hacer lo mismo cuando la tengas montada y funcionando ;-)<br />
<br />
* '''¿Cómo empiezo?'''<br />
:Puedes empezar leyendo estos documentos (en inglés)<br />
:* [http://reprapbook.appspot.com/ Reprapbook]: Introducción a las impresoras 3D open-source Reprap<br />
:* [http://garyhodgson.com/reprap/prusa-mendel-visual-instructions/ Instrucciones visuales de construcción de la Prusa]. Guía de construcción con muchas fotos. Podrás ver de un tirón todos los pasos a seguir. Sin embargo ten en cuenta que son de la '''Prusa 1''' (que está obsoleta)<br />
:Y por si no sabes algún término, puedes buscar en nuestro '''[[Clone_wars:_Glosario|glosario]]'''.<br />
<br />
* '''¿Dónde compro el resto del material?'''<br />
:Hemos apuntado en la wiki un [[http://www.reprap.org/wiki/Proyecto_Clone_Wars#Tiendas listado de las tiendas]]. Puedes buscar en ellas. También te recomendamos que eches un vistazo a las páginas de los clones terminados (categoría Jedi o superior). Muchos están poniendo información sobre lo que se han gastado y dónde han comprado el material.<br />
<br />
* '''¡Estoy convencido! ¡Quiero construirme una Prusa 2!'''<br />
:¡Estupendo! Echa un vistazo a '''[http://www.iearobotics.com/wiki/index.php?title=Guia_de_montaje_de_la_Prusa_2 estos video-tutoriales en Castellano]''', y no te pierdas '''[https://plus.google.com/u/0/photos/104606827981899055492/albums/5765370304405365281 este álbum de fotos]'''! El listado de materiales lo tenemos [[Clone wars: Prusa Iteración 2|en esta página de la wiki]].<br />
<br />
== Lista de Correo ==<br />
<br />
{| class="wikitable"<br />
|- <br />
| [http://groups.google.com/group/asrob-uc3m-impresoras-3d Lista de correo del grupo de Impresoras 3D]. Es el grupo google que usaremos para comunicarnos<br />
|}<br />
<br />
== Mapa del Imperio de los Clones ==<br />
<br />
{| class="wikitable"<br />
|- <br />
| [[File:Clon-wars-map.png|200px|Acceso directo al mapa|link=http://maps.google.com/maps/ms?msid=212249552587451398586.0004b8d56644866cdfb9c&msa=0&ll=40.413496,-3.713379&spn=13.022942,28.520508]]<br />
|<br />
* ¿Quieres conocer '''cuántos clones hay cerca de donde vives''' o ver '''la extensión del imperio de clones'''? Consulta el [[Mapa Imperio Clones| mapa del Imperio de los Clones]].<br />
* ¿Quieres que todos sepan '''dónde se encuentra el clon que has construido o que estás construyendo'''? En el [[Mapa Imperio Clones| mapa del Imperio de los Clones]] puedes añadir la localización y estado de tu clon.<br />
|}<br />
<br />
== Banco de piezas ==<br />
<br />
{| class="wikitable"<br />
|- <br />
| [[File:Clone-wars-bank-logo.png|link=Clone Wars Bank]]<br />
| [[Clone Wars Bank|ACCESO AL BANCO]]<br />
|}<br />
<br />
¿Quieres montarte tu clon pero '''necesitas que te impriman las piezas'''?. Usa el [[Clone Wars Bank|Banco de piezas]]<br />
<br />
* Apúntate como solicitante<br />
* Anúncialo en la lista. Algún clon te "apadrinará" y te las imprimirá<br />
* Una vez montada tu impresora, deberás imprimir un juego completo y bien devolverlo al clon original (modalidad Préstamo) o bien imprimírselas a otro clon que tu elijas (Modalidad Donación Clone wars)<br />
<br />
== El Bazar Jedi ==<br />
<br />
Además de las donaciones, algunos clones ponen a la venta juegos de piezas para financiarse sus impresoras (o sus frikadas varias).<br />
* '''¿Te quieres construir un Clon?''' Busca las ofertas en el Bazar Jedi<br />
* '''¿Te has construido un clon?''' Pon tus ofertas en el Bazar Jedi<br />
<br />
{| class="wikitable"<br />
|- <br />
| [[File:WattosShop.jpg|thumb|250px]]<br />
| [[Bazar Jedi|ACCESO AL BAZAR JEDI]]<br />
|}<br />
<br />
== El Imperio Clone wars ==<br />
<br />
=== Árbol genealógico ===<br />
Todo clon tiene un origen...<br />
<p id="mainPage.title" style="background:#eeeeee; color:#cf7606; padding: 0.4em; font-weight: bold; font-size: 120%;">Cantidad de Repstrap hasta el momento: 15 </p><br />
<p id="mainPage.title" style="background:#eeeeee; color:#cf7606; padding: 0.4em; font-weight: bold; font-size: 120%;">Cantidad de clones producidos hasta el momento: 80 </p><br />
<p id="mainPage.title" style="background:#eeeeee; color:#cf3606; padding: 0.4em; font-weight: bold; font-size: 120%;">Cantidad total de Impresoras 3D: 95 </p><br />
{| class="wikitable"<br />
|- <br />
| [[File:2012-12-06-clone-wars-genealogy-80-clones.png|800px|Todo clon tiene un origen... (click para agrandar)]]<br />
|-----<br />
|<br />
* El fichero vectorial (SVG) está en [https://github.com/Obijuan/Clone-wars/tree/master/genealogy el repositorio] <br />
* [https://github.com/Obijuan/Clone-wars/raw/master/genealogy/png/2012-12-06-clone-wars-genealogy-80-clones.png PNG en alta resolución]<br />
|}<br />
<br />
=== Cronología ===<br />
<br />
{| class="wikitable"<br />
|- <br />
| [[File:clonwars_timeline.png|200px|Acceso a la cronología|link=http://www.b-o-t.cc]]<br />
|<br />
* El proyecto CloneWars tiene ya un tamaño importante. Hemos creado [http://www.b-o-t.cc esta cronología] para mostrar de otra forma todos los acontecimientos que han ido recogiéndose y que sin duda se producirán en adelante.<br />
|}<br />
<br />
== Generación 0: Las impresoras progenitoras ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
|- <br />
| [[File:Madre-gen0-r1.jpg|150px|link=Makerbot Thing-o-matic: MADRE]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">MADRE</font>'''<br />
* '''Localización''': Universidad Carlos III de Madrid<br />
* '''Modelo''': [http://store.makerbot.com/makerbot-thing-o-matic.html Thing-o-Matic] de la empresa Makerbot<br />
* '''Nacimiento''': 16/Mayo/2011<br />
* '''Propiedad de''': [http://asrob.uc3m.es/index.php/Main_Page Asociación de Robótica de la UC3M]<br />
* '''Hijos''': [[Clone wars:Impresora Death Star|Death Star]], [[Clone wars:Impresora Maese Artorius|Maese Artorius]], [[Clone wars:Impresora Mardan|Mardan]], [[Clone wars:Impresora Sonny|Sonny]], [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]], [[Clone_wars:Impresora_Wendy|Wendy]]<br />
* '''[http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:MADRE MAS INFORMACIÓN]'''<br />
|<br />
<center> [[File:Mother 98098.png|200px]] </center><br />
|--------<br />
| [[File:PADRE-1.jpg|160px|link=Makerbot Thing-o-matic: PADRE]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">PADRE</font>''' (a.k.a UC3-PO)<br />
* '''Localización''': Universidad Carlos III de Madrid<br />
* '''Modelo''': [http://store.makerbot.com/makerbot-thing-o-matic.html Thing-o-Matic] de la empresa Makerbot<br />
* '''Nacimiento''': 8/Oct/2011 (Impresión de la primera pieza)<br />
* '''Propiedad de''': [http://www.uc3m.es/portal/page/portal/dpto_ing_sistemas_automatica Departamento de Ingeniería de Sistemas y Automática]<br />
* '''Hijos''': [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]], [[Clone_wars:Impresora_Wendy|Wendy]], [[Clone wars: Impresora Dédadlo|Dédalo]]<br />
* '''[http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:PADRE MAS INFORMACIÓN]'''<br />
|<br />
<center> [[File:Darth-vader-star-wars-doormat.jpg|170px]] </center><br />
<center>"Yo soy tu padre..."</center><br />
|----------------<br />
| [[File:R1-50.jpg|160px|link=http://www.iearobotics.com/wiki/index.php?title=Makerbot_Cupcake:_R1]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">R1</font>''' (<font color="#00FF00">R.I.P</font>)<br />
* '''Localización''': Madrid<br />
* '''Modelo''': [http://wiki.makerbot.com/cupcake Cupcake], de Makerbot Industries (Número 8 del mundo)<br />
* '''Nacimiento''': 19/Mayo/2009<br />
* '''Propiedad de''': <br />
** [http://www.iearobotics.com/wiki/index.php?title=Juan_Gonzalez:Main Juan González-Gómez] (Obijuan)<br />
** [http://www.iearobotics.com/wiki/index.php?title=Andr%C3%A9s_Prieto-Moreno Andrés Prieto-Moreno]<br />
* '''Hijos''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel:_R2D2 R2D2]<br />
<br />
* '''[http://www.iearobotics.com/wiki/index.php?title=Makerbot_Cupcake:_R1 MAS INFORMACIÓN]'''<br />
|<br />
<center> [[File:R1-series.jpg |90px]] </center> <br><br />
<center>[http://starwars.wikia.com/wiki/R1-series_astromech_droid Serie R1]</center><br />
|----------------<br />
| [[File:MAF1.jpeg|160px]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">MAF-1</font>''' <br />
* '''Localización''': Madrid y "El Bierzo"<br />
* '''Modelo''': [http://www.makergear.com/blogs/frontpage/3323752-the-makergear-mosaic-3d-printer Mosaic], de Makergear<br />
* '''Nacimiento''': 22/Abril/2012 <br />
* '''Propiedad de''': <br />
**[http://madebyfrutos.es/ Miguel Angel de Frutos] <br />
* '''Hijos''': [[Clone wars: Impresora Rewok|Rewok]]<br />
* '''[[MakerGear Mosaic 1: MAF-1|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:StormtrooperMoonwalkWallpaper.jpg |250px]] </center> <br><br />
|----------------<br />
| [[File:Clon0-Demiurgo-6489.jpg|160px]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">Demiurgo</font>''' <br />
* '''Localización''': Madrid<br />
* '''Modelo''': [http://store.makerbot.com/makerbot-thing-o-matic.html Thing-o-Matic] de la empresa Makerbot<br />
* '''Nacimiento''': 15/Enero/2012<br />
* '''Propiedad de''': Jon Goitia<br />
* '''Hijos''': [[Impresora: la cosa|La Cosa]], [[Impresora:_unicorn|Unicorn]]<br />
* '''[[Impresora Progenitora: Demiurgo|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Lion-faced deity.jpg|200px]] </center> <br><br />
|----------------<br />
| [[File:IMG_0472.jpg|200px]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">3DGDAF</font>''' <br />
* '''Modelo''': [http://store.makerbot.com/replicator-404.html Replicator], de la empresa Makerbot<br />
* '''Nacimiento''': 22/06/2012 - Impresión de la primera pieza el 26/06/2012<br />
* '''Propiedad de''': [http://www.uc3m.es/portal/page/portal/grupos_investigacion/grupo_displays_aplicaciones_fotonicas Grupo de Displays y Aplicaciones Fotónicas de la UC3M]<br />
* '''Localización''': UC3M, Madrid<br />
* '''MAS INFORMACIÓN'''<br />
|<br />
<center> [[File:Logo 3D-GDAF.jpg|170px]] </center><br />
|----------------<br />
| [[File:Robcib-maker.jpg|200px|link=http://www.iearobotics.com/wiki/index.php?title=MakerBot_Thing-o-Matic:_Robcib-Maker]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">UPM-MAKER</font>''' <br />
* '''Modelo''': [http://store.makerbot.com/makerbot-thing-o-matic.html Thing-o-Matic] de la empresa Makerbot<br />
* '''Nacimiento''': 11/2011 <br />
* '''Propiedad de''': [http://www.robcib.etsii.upm.es/ RobCib]. Grupo de Robótica y Cibernética, UPM.<br />
* '''Localización''': ETSII-UPM, Madrid<br />
* '''[http://www.iearobotics.com/wiki/index.php?title=MakerBot_Thing-o-Matic:_Robcib-Maker MAS INFORMACIÓN]'''<br />
|<br />
<center> [[File:robcib.jpg|170px]] </center><br />
|----------------<br />
| [[File:Clon0-CADesigns.png|200px|link=]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">CADesigns</font>''' <br />
* '''Modelo''': Derivación thik-o-matic (modificaciones a sistema métrico)<br />
* '''Nacimiento''': Marzo 2011<br />
* '''Propiedad de''': Carlos Monreal<br />
* '''Localización''': Zaragoza<br />
* '''MAS INFORMACIÓN'''<br />
|<br />
<center> [[File:Cadesign-logo.png|170px]] </center><br />
|--------<br />
| [[File:Cupcake-madalena.jpg|200px]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">Madalena</font>'''<br />
* '''Modelo''': [http://wiki.makerbot.com/cupcake Cupcake], de Makerbot Industries (nº 2542)<br />
* '''Nacimiento''': 12/Mar/2011 (Impresión de la primera pieza)<br />
* '''Propiedad de''': [http://canarnova.blogspot.com/ Canarnova - Grupo de creación e innovación tecnológica de Canarias]<br />
* '''Localización''': Tenerife, Canarias<br />
* '''MÁS INFORMACIÓN'''<br />
|<br />
<center> [[File:Cupcake_mint.jpg|170px]] </center><br />
|------------- <br />
| <center>[[File:Clone0-Xan.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Xan</font>'''<br />
*'''Lugar''': Cancún (México)<br />
*'''Familia''': [http://reprap.org/wiki/Printrbot#Laser-cut_Printrbots Printrbot Plus]<br />
*'''Autor''': Alejandro Martín<br />
* '''Nacimiento''': 23/Sep/2012<br />
* '''MÁS INFORMACIÓN'''<br />
| <center>[[File:Xan-logo.png|150px]]</center> <br />
|------------- <br />
| <center>[[File:Clon0-Plumabot-M.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Plumabot-M</font>'''<br />
*'''Localización''': Madrid<br />
*'''Modelo''': Replicator I<br />
*'''Lugar''': IES Juan de la Cierva, Madrid<br />
* '''Nacimiento''': 4/Junio/2012<br />
*'''Propiedad de''': IES Juan de la Cierva<br />
* '''MÁS INFORMACIÓN'''<br />
| <center>[[File:Plumabot-logo.png|150px]]</center> <br />
|------------- <br />
| <center>[[File:Clone0-pris.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Pris</font>'''<br />
*'''Lugar''': Madrid<br />
*'''Autor''': Jose Hevia<br />
*'''Familia''': Printrbot+ LC<br />
*'''Nacimiento''': 20/Julio/2012<br />
*'''MÁS INFORMACIÓN'''<br />
| <center>[[File:Pris2.jpg|200px]]</center> <br />
|------------- <br />
| <center>[[File:Clon0-Micro tr.png|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Micro</font>'''<br />
*'''Lugar''': Madrid<br />
*'''Autor''': [http://carlosgs.es/ Carlos García Saura]<br />
*'''Familia''': [http://printrbot.com/shop/printrbot-jr/ Printrbot jr.]<br />
*'''Nacimiento''': 23/Octubre/2012<br />
*'''MÁS INFORMACIÓN'''<br />
| <center>[[File:Micro-logo.png|200px]]</center> <br />
|------------- <br />
| <center>[[File:Clon0-HORI.png|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">HORI</font>'''<br />
*'''Lugar''': Madrid<br />
*'''Propietario''': [http://www-bsac.eecs.berkeley.edu/~mccoy/ Chris D. McCoy] <br />
*'''Operador actual ''': [http://madebyfrutos.wordpress.com/ Miguel Ángel de Frutos], en [http://aerobotclubderobticadeaeronuticos.blogspot.com.es/ Aerobot Club de Robótica] <br />
*'''Familia''': [http://store.makerbot.com/replicator.html/ Replicator I], de Makerbot<br />
*'''Nacimiento''': 10/Julio/2012<br />
*'''[[HORI |MAS INFORMACIÓN]]'''<br />
| <center>[[File:2383_logo_2011-09-28_logo_v4.jpg|150px]]</center> <br />
|}<br />
<br />
== Los Clones ==<br />
<br />
=== Máster de la orden Jedi ===<br />
* '''Descripción''': Clones que hayan parido '''TRES o más clones''' totalmente operativos (Jedi)<br />
<br />
{| class="wikitable" style="width:100%"<br />
<br />
|---------<br />
| <center>[[File:Clon-29-Gandalf-the-transparent.png|200px]]</center> <br />
|<br />
* '''Clon #29''': '''<font color="#0000FF">Gandalf the transparent</font>'''<br />
* '''Lugar''': Universidad Carlos III de Madrid<br />
* '''Familia''': [[Prusa_Air_2|Prusa Air 2]]<br />
* '''Generación''': 1<br />
* '''Autor''': [http://iearobotics.com/alberto/doku.php Alberto Valero]<br />
* '''Impresoras Progenitoras''': [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:PADRE PADRE] y [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:MADRE MADRE]<br />
* '''Descendencia''': [[Impresora: la cosa|La Cosa]], [[Impresora:_unicorn|Unicorn]], Black Widow, T.I.A., 3Dbcc<br />
<br />
* '''Nacimiento''': 20/Jun/2012<br />
* '''[[Clone wars: Impresora Gandalf the transparent|MÁS INFORMACIÓN]]'''<br />
|<center> [[File:Logo-gandalf-transparent2.png|150px]]</center><br />
|-----------<br />
| <center>[[File:Prusa-r2d2-clon.jpg|200px|link=http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel:_R2D2]]</center><br />
|<br />
* '''Clon #1''': '''<font color="#0000FF">R2D2</font>''' (<font color="#00FF00">R.I.P</font>)<br />
* '''Luegar''': Madrid<br />
* '''Familia''': [[Prusa Mendel (iteration 1)|Prusa Mendel]] original<br />
* '''Generación''': 1<br />
* '''Autores''':<br />
** [http://www.iearobotics.com/wiki/index.php?title=Juan_Gonzalez:Main Juan González-Gómez] (Obijuan)<br />
** [http://www.iearobotics.com/wiki/index.php?title=Andr%C3%A9s_Prieto-Moreno Andrés Prieto-Moreno]<br />
* '''Nacimiento''': 24/Dic/2011<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Makerbot_Cupcake:_R1 R1]<br />
* '''Descendencia''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteración_2:_R3 R3], [[Clone wars: Impresora Uterus|Úterus]], [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_Han Han], [[Clone wars:Impresora X Wing|X-wing]]<br />
* '''[http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel:_R2D2 MAS INFORMACIÓN]'''<br />
|<br />
<center> [[File:R2d2.jpg|150px|link=http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel:_R2D2]]</center><br />
<center>[http://starwars.wikia.com/wiki/R2-series_astromech_droid Serie R2]</center><br />
|-----------<br />
| <center>[[File:R3-1.jpg|200px]]</center> <br />
|<br />
* '''Clon #13''': '''<font color="#0000FF">R3</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': [[Prusa Mendel (iteration 2)|Prusa Mendel Iteración 2]]<br />
* '''Generación: 2<br />
* '''Autor''': [http://www.iearobotics.com/wiki/index.php?title=Juan_Gonzalez:Main Juan González Gómez] (Obijuan)<br />
* '''Impresora progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel:_R2D2 R2D2]<br />
* '''Descendencia''': [[Clone_wars:_Impresora_SHODAN|Shodan]], [[Clone wars:Impresora Prusa-popoulus|Prusa-Popoulus]], [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R2-reloaded R2-RELOADED]<br />
* '''Nacimiento''': 01/Abril/2012<br />
* '''[http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R3 MÁS INFORMACIÓN]'''<br />
|<br />
<center> [[File:R3.jpg|120px]]</center><br />
|---------------<br />
| <center>[[File:Clon-Deathstar 2012-01-07 1-r2.jpg|200px|link=Clone wars:Impresora Death Star]]</center><br />
|<br />
* '''Clon #2''': '''<font color="#0000FF">Death Star</font>'''<br />
* '''Lugar''': MADRID<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original<br />
* '''Generación''': 1<br />
* '''Autor''': Fernando Salceda Álvarez (klonando)<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:MADRE MADRE]<br />
* '''Descendencia''': [[Clone_wars:_The_Clone_UA|The Clone UA]], [[Clone_wars:_TIEFighter|TIE Fighter]], [[Clone_Wars:_Tron|Tron]]<br />
* '''Nacimiento''': 06/Enero/2012<br />
* '''[[Clone_wars:Impresora_Death_Star|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Deathstar.png|150px|link=Clone wars:Impresora Death Star]]</center><br />
|----------------<br />
| <center>[[File:Jedi manuela.jpg|220px|]]</center><br />
|<br />
* '''Clon #10''': '''<font color="#0000FF">Manuela</font>'''<br />
* '''Lugar''': Valladolid<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original modificada con piezas V2 <br />
* '''Generación''': 1<br />
* '''Autor''': Jose Luis del Olmo (Macnetic)<br />
* '''Impresora Progenitora''': Desconocida<br />
* '''Descendencia''': [[Clone Wars: Impresora Pepa|Pepa]], [[Clone wars:Impresora Daneel 3-law|Daneel 3-law]], C3PO, Michaelmas, Alcar<br />
* '''Nacimiento''': 02/Marzo/2012<br />
* '''[[Clone wars:Impresora Manuela|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Macnetic.png|200px]]</center><br />
|-----<br />
| <center>[[File:Clon-32-guaifi.jpg|200px]]</center> <br />
|<br />
* '''Clon #32''': '''<font color="#0000FF">Guaifi</font>'''<br />
* '''Lugar''': A Coruña<br />
* '''Familia''': [[Prusa Mendel (iteration 2)]], con mejoras de piezas<br />
* '''Generación''': 2 <br />
* '''Autor''': Fidel Fraga Fernández (@guaifi)<br />
* '''Impresora Progenitora''': [[Clone wars: Impresora Ociorum|Ociroum/Bricolabs]]<br />
* '''Descendencia''': Abe, Matrix, Laura Palmer<br />
* '''Nacimiento''': 10/Jun/2012<br />
* [http://fidelfraga.eu/content/impresora-3d MÁS INFORMACIÓN]<br />
: <br />
|<center> [[File:Guaifi-logo-temp.png|200px]]</center><br />
|-----------<br />
<br />
| <center>[[File:J52-r1.jpg|200px|]]</center><br />
|<br />
* '''Clon #9''': '''<font color="#0000FF">Johnny 5</font>'''<br />
* '''Lugar''': Alicante<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original modificada con piezas de la V2<br />
* '''Generación''': 1<br />
* '''Autor''': [http://www.mbrobotics.es/MbRobotics/Main.html Miguel Angel Berna Alberola]<br />
* '''Impresora Progenitora''': Desconocida<br />
* '''Descendencia:''' EVE, WALL-E, Kneesaa, Conguito 3D, Nexus 6, Wedge, Prusita (Prusi)<br />
* Nacimiento: '''25/Febrero/2012'''<br />
* '''[http://www.mbrobotics.es/Wiki/index.php?title=JOHNNY5 MAS INFORMACIÓN]'''<br />
|<br />
<center> [[File:J5.jpg|200px]]</center><br />
|-----------<br />
| <center>[[File:Clone-39-Daneel 3-law jedi.png|200px]]</center><br />
|<br />
*'''Clon #39''': '''<font color="#0000FF">Daneel 3-law</font>'''<br />
*'''Lugar''': Universidad de Zaragoza<br />
*'''Familia''': Prusa Iteracion 2<br />
*'''Generación''': 2<br />
*'''Impresora Progenitora''': [[Clone wars:Impresora Manuela|Manuela]]<br />
*'''Autores''': <br />
** Alejandro Suárez<br />
** Javier Briz<br />
*'''Nacimiento''': 11/Agosto/2012<br />
*'''[[Clone wars:Impresora Daneel 3-law|MÁS INFORMACIÓN]]'''<br />
: <br />
| <center>[[File:Logo_pulsar.png|200px]]</center><br />
|-----------<br />
<br />
| <center>[[File:Clon-30-xwing.jpg|250px]]</center> <br />
|<br />
* '''Clon #30''': '''<font color="#0000FF">X-Wing</font>'''<br />
* '''Lugar''': Universidad de Málaga<br />
* '''Familia''': [http://asrob.uc3m.es/index.php/Clone_wars:_Prusa_Iteraci%C3%B3n_2 Prusa Mendel Iteration 2]<br />
* '''Generación''': 2 <br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel:_R2D2 R2D2]<br />
* '''Autor''': [http://blog.reclone3d.com Exergy123]<br />
* '''Descendencia:''': Y-Wing,Restaun3d,LAAT<br />
* '''Nacimiento''': 26/Jun/2012<br />
* '''[[Clone wars:Impresora X Wing|MÁS INFORMACIÓN]]'''<br />
: <br />
|<center> [[File:Xwing_RS3.jpg|150px]]</center><br />
|----------<br />
|}<br />
<br />
=== Consejero Jedi Supremo ===<br />
* '''Descripción''': Clones que hayan parido '''DOS clones''' totalmente operativos (Jedi)<br />
* '''Para subir de categoría''': Parir otro clon más<br />
{| class="wikitable" style="width:100%"<br />
|-------------<br />
| <center>[[File:Clon-mardan.jpg|200px|link=Clone wars:Impresora Mardan]]</center><br />
|<br />
* '''Clon #4''': '''<font color="#0000FF">Mardan</font>'''<br />
* '''Luegar''': Universidad Carlos III de Madrid<br />
* '''Familia''': [[Prusa_Mendel_(iteration_1)]]<br />
* '''Generación''': 1<br />
* '''Autor''': Marco Esteban Illescas<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:MADRE MADRE]<br />
* '''Descendencia''': Marvin, Howarto<br />
* Nacimiento: '''19/Enero/2012'''<br />
* '''[[Clone wars:Impresora Mardan|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Potato.jpg|150px|link=Clone wars:Impresora Mardan]]</center><br />
|--------------<br />
<br />
|}<br />
<br />
=== Consejero Jedi: Miembro del consejo jedi ===<br />
<br />
* '''Descripción''': Clones que hayan parido '''un clon''' totalmente operativo (Jedi). Por tanto, son clones con descendencia<br />
* '''Para subir de categoría''': Parir otro clon más<br />
{| class="wikitable" style="width:100%"<br />
|---------<br />
| <center>[[File:Misan1-r1.png|200px]]</center> <br />
|<br />
* '''Clon #19''': '''<font color="#0000FF">Black Misan</font>'''<br />
* '''Lugar''': Valencia <br />
* '''Familia''': Prusa mendel original <br />
* '''Generación''': 1<br />
* '''Autor''': Miguel Sánchez<br />
* '''Impresora Progenitora''': Piezas compradas RepRap-fab.org (Stoffel15)<br />
* '''Descendencia''': Blue Misan (y parte de Ukraine)<br />
* '''Nacimiento''': 23/Octubre/2011 <br />
* '''[[Clone Wars: Impresora Black Misan|MÁS INFORMACIÓN]]<br />
|<center> [[File:Photo.jpg|150px]]</center><br />
|----------<br />
| <center>[[File:Misan2-r3.png|200px]]</center> <br />
|<br />
* '''Clon #20''': '''<font color="#0000FF">Blue Misan</font>'''<br />
* '''Lugar''': Valencia <br />
* '''Familia''': Prusa iteración 2<br />
* '''Generación''': 2<br />
* '''Autor''': Miguel Sánchez<br />
* '''Impresora Progenitora''': [[Clone Wars: Impresora Black Misan|Black Misan]]<br />
* '''Descendencia''': Ukraine<br />
* '''Nacimiento''': 15/Marzo/2012<br />
* '''[[Clone Wars: Impresora Blue Misan|MÁS INFORMACIÓN]]<br />
|<center> [[File:Photo.jpg|150px]]</center><br />
|----------<br />
| <center>[[File:Clon halcon milenario.png|200px|link=Clone wars:Impresora Halcón Milenario]]</center><br />
|<br />
* '''Clon #5''': '''<font color="#0000FF">Halcón Milenario</font>'''<br />
* '''Lugar''': Universidad Autónoma de Madrid<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original, con rodamientos lineales<br />
* '''Generación''': 1<br />
* '''Autores''': <br />
** Carlos García Saura<br />
** Miembros del [http://www.uam.es/crm Club de Robótica y Mecatrónica de la UAM]<br />
* '''Impresora Progenitora''': Desconocida<br />
* '''Descendencia''': Lucy<br />
* '''Nacimiento''': 27/Enero/2012<br />
* '''[[Clone wars:Impresora Halcón Milenario|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Milleniumfalcon2.jpg|200px|link=Clone wars:Impresora Halcón Milenario]]</center><br />
|-----------<br />
| <center>[[File:IMG 1310.jpg|200px|link=http://asrob.uc3m.es/index.php/Clone_wars:_Impresora_Ociorum]]</center> <br />
| <br />
* '''Clon #15''': '''<font color="#0000FF">Ociorum/Bricolabs</font>'''<br />
* '''Lugar''': Coruña (Galicia)<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 1<br />
* '''Autores''':<br />
** Alejandro Taracido ([http://twitter.com/#!/TCRobotics @TCRobotics )] [http://tcrobotics.blogspot.com/2011/05/orugasrobot-arduinoorugaspan.html Blog TCRobotics] <br />
** Fidel Fraga ([http://twitter.com/#!/guaifi @guaifi )]<br />
** Quico Prol ([http://twitter.com/#!/quicoprol @quicoprol )]<br />
** Xulio Coira ([http://twitter.com/#!/xulioc @xulioc )]<br />
* '''Impresora Progenitora''': Holandesa ebay<br />
* '''Nacimiento''': 13/Abril/2012<br />
* [http://www.ociorum.org Asociación Ociorum]<br />
* [[Clone wars: Impresora_Ociorum|MÁS INFORMACIÓN]]<br />
| <center> [[File:Ociorum.jpeg|200px]]</center><br />
|--------------<br />
| <center>[[File:Clon-maese-artorius.jpg|200px|link=http://asrob.uc3m.es/index.php/Clone_wars:Impresora_Maese_Artorius]]</center><br />
|<br />
* '''Clon #3''': '''<font color="#0000FF">Maese Artorius</font>'''<br />
* '''Luegar''': Universidad Carlos III de Madrid<br />
* '''Familia''': [[Prusa_Mendel]] original<br />
* '''Generación''': 1<br />
* '''Autor''': Arturo Vera García<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:MADRE MADRE]<br />
* '''Descendencia''': jP<br />
* Nacimiento: '''19/Enero/2012'''<br />
* '''[[Clone_wars:Impresora_Maese_Artorius|MAS INFORMACIÓN]]'''<br />
| <center> [[File:86509-50249-mace-windu_large.jpg|150px|link=Clone wars:Impresora Maese Artorius]]</center><br />
|--------<br />
| <center>[[File:Clon-17-uterus.jpg|280px]]</center> <br />
|<br />
* '''Clon #17''': '''<font color="#0000FF">Úterus</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa iteración 2<br />
* '''Generación''': 2<br />
* Autor: Juan Manuel Amuedo González (Coleóptero)<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel:_R2D2 R2]<br />
* '''Descendencia''': [[Clone wars: Arduteka|Geek-X-truder]]<br />
* '''Nacimiento''': 05/Mayo/2012<br />
* [[Clone wars: Impresora Uterus|MÁS INFORMACIÓN]]<br />
|<br />
<center> [[File:SuperUterus-big-475x382.png|140px]]</center><br />
|-------------<br />
| <center>[[File:Potato-r1.png|200px]]</center> <br />
|<br />
* '''Clon #16''': '''<font color="#0000FF">Potato</font>'''<br />
* '''Lugar''': Universidad Carlos III de Madrid<br />
* '''Familia''': Prusa iteración 2<br />
* '''Generación''': 1<br />
* Autores: [https://plus.google.com/108347194424547002289/about Santiago López]<br />
* '''Impresora Progenitora''': Holandesa ebay<br />
* '''Nacimiento''': 15/Abril/2012<br />
* '''[[Clone wars: Impresora Potato|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Mrpotato.jpg|140px]]</center><br />
<br />
<br />
|-----------<br />
| <center>[[File:2012-02-07-paclemaker.jpg|200px|link=Clone wars:Impresora PacleMAKER]]</center> <br />
|<br />
* '''Clon #7''': '''<font color="#0000FF">PacleMAKER</font>''' <br />
* '''Lugar''': Universidad Politécnica de Madrid<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original<br />
* '''Generación''': 1<br />
* '''Universidad Politécnica de Madrid'''<br />
* '''Autor''': Pablo Clemente<br />
* '''Impresora Progenitora''': Thing-o-matic de la UPM<br />
* Nacimiento: '''7/Febrero/2012'''<br />
* '''[[Clone wars:Impresora PacleMAKER|MÁS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:PacleMaker-logo.png|200px|link=Clone wars:Impresora PacleMAKER]]</center><br />
|-----------<br />
| <center>[[File:Clone-23-The Clone UA Jedi.jpg|200px]]</center> <br />
|<br />
* '''Clon #23''': '''<font color="#0000FF">The Clon UA</font>'''<br />
* '''Lugar''': Universidad de Alicante <br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 2<br />
* Autor: Diego Viejo<br />
* '''Impresora Progenitora''': [[Clone wars:Impresora Death Star|Deathstar]]<br />
* '''Nacimiento''': 23/Mayo/2012<br />
* '''Descendencia''': [[Clone_wars:_Impresora_Dolly|Dolly]]<br />
* '''[[Clone_wars:_The_Clone_UA|MÁS INFORMACIÓN]]'''<br />
|<center> [[File:Clone_UA_logo.png|150px]]</center><br />
|---------<br />
| <center>[[File:Clon-46-3D-Prisa.jpg|150px]]</center><br />
|<br />
* '''Clon #46''': '''3D Prisa'''<br />
* '''Lugar''': Madrid<br />
* '''Tipo''': [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Generación''': 1<br />
* '''Autor''': Fernando Remiro<br />
* '''Impresora progenitora''': Plumabot_M<br />
* '''Descendencia''': Arturo<br />
<br />
* '''Nacimiento''': 6/9/2012 (acabada)<br />
* [[Clone wars: Impresora 3D-Prisa|MÁS INFORMACIÓN]]<br />
|<center>[[File:Remiro-1.jpg|150px]]</center> <br />
|---------<br />
| <center>[[File:Clon-53-Michaelmas.jpg|220px|]]</center><br />
|<br />
* '''Clon #53''': '''<font color="#0000FF">Michaelmas</font>'''<br />
* '''Lugar''': Valladolid<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2] <br />
* '''Generación''': 2<br />
* '''Autor''': Jose Luis del Olmo (Macnetic)<br />
* '''Impresora Progenitora''': Manuela<br />
* '''Descendencia''': VirPrusa<br />
* Nacimiento: '''05/Octubre/2012'''<br />
* '''[[Clone wars:Impresora Michaelmas|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Macnetic.png|200px]]</center><br />
|---------<br />
<br />
<br />
| <center>[[File:Clon-44-Othon.jpg|200px]]</center> <br />
|<br />
* '''Clon #44''': '''<font color="#0000FF">Othon</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa 2<br />
* '''Generación''': 2<br />
* '''Autor''': Álvaro Ollero AKA Damrod AKA Fuintur<br />
* '''Nacimiento''': 22/07/2012 (primera pieza impresa)<br />
* '''Impresora progenitora''': [http://reprap.org/wiki/Clone_wars:Impresora_PacleMAKER PacleMAKER]<br />
* '''Descendencia''': [http://reprap.org/wiki/Clone_Wars:_Roi Roi]<br />
* [http://reprap.org/wiki/Clone_Wars:_Othon '''MÁS INFORMACIÓN''']<br />
: <br />
|<br />
<center> [[File:Othon.jpg|150px]]</center><br />
|--------------<br />
|}<br />
<br />
=== Jedi Masters ===<br />
<br />
* '''Descripción''': Clones totalmente operativos, que han impreso al menos 1 juego de piezas para construir otro clon.<br />
* '''Para subir de categoría''': Tener descendencia. Se debe parir un clon completo (totalmente operativo)<br />
<br />
{| class="wikitable" style="width:100%"<br />
|----------<br />
| <center>[[File:Clone-26-Rewok.png|200px]]</center> <br />
|<br />
* '''Clon #26''': '''<font color="#0000FF">Rewok</font>'''<br />
* '''Lugar''': Ourense<br />
* '''Familia''': Printrbot<br />
* '''Generación''': 1<br />
* '''Autor''': Carlos Curras (Aisflou)<br />
* '''Impresora Progenitora''': [[MakerGear Mosaic 1: MAF-1|MAF-1]]<br />
* '''Nacimiento''': 13/Jun/2012<br />
* '''[[Clone wars: Impresora Rewok|MÁS INFORMACIÓN]]'''<br />
|<center> [[File:Rewok.jpg|150px]]</center><br />
|-----------<br />
| <center>[[File:Clon-41-Geek-X-truder.jpg|150px]]</center> <br />
|<br />
*'''Clon #41''': '''<font color="#0000FF">Geek-X-truder</font>'''<br />
* '''Tipo''': Printrbot<br />
* '''Generación''': 3<br />
* '''Impresora progenitora''': [[Clone wars:_Impresora_Uterus|Uterus]]<br />
* '''Descendencia''': Aitor, SanValero, Papá quiero un robot, Ignacio<br />
* '''Autor''': Pablo Murillo - Arduteka<br />
* '''Zaragoza'''<br />
* '''Nacimiento''': 26/Agosto/2012<br />
* '''[[Clone_wars:Impresora Geek-X-truder|MÁS INFORMACIÓN]]'''<br />
: <br />
|<br />
<center> [[File:Logo_iArtek_Arduteka_copia_small.gif|150px]]</center><br />
|---------<br />
| <center>[[File:Clon-42-R2-Reloaded.jpg|200px]]</center> <br />
|<br />
*'''Clon #42''': '''<font color="#0000FF">R2-RELOADED</font>'''<br />
* '''Tipo''': Prusa 2<br />
* '''Generación''': 3<br />
* '''Impresora progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R3 R3]<br />
* '''Autor''': [http://www.iearobotics.com/wiki/index.php?title=Juan_Gonzalez:Main Juan Gonzalez Gomez] (Obijuan)<br />
* '''Lugar''': Universidad Politécnica de Madrid<br />
* '''Nacimiento''': 28/Agosto/2012<br />
* [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R2-reloaded '''MÁS INFORMACIÓN''']<br />
: <br />
|<br />
<center> [[File:R2-reloaded.png|150px]]</center><br />
|-------------<br />
| <center>[[File:Clone-52-carbonite.png|200px|Carbonite Team]]</center> <br />
|<br />
* '''Clon #52''': '''<font color="#0000FF">Carbonite</font>'''<br />
* '''Lugar''': Alcalá de Henares - Madrid<br />
* [http://www.complubot.org Asociación de Robótica Educativa Complubot]<br />
*'''Familia''':[[Clone wars: Prusa Mold|Prusa Mold]]<br />
* Autores: <br />
** Nerea de la Riva<br />
** Iván Gallego<br />
** Eduardo Gallego (el que compra las cosas)<br />
*'''Nacimiento''': 25 de septiembre de 2012<br />
* [[Clone wars: Impresora Carbonite|MÁS INFORMACIÓN]]<br />
|<br />
<center> [[File:Avatar_complubot.png|150px|link=http://www.complubot.org]]</center><br />
|------------- <br />
| <center>[[File:matrix_printer.png|200px]]</center> <br />
|<br />
* '''Clon #48''': [[Clone Wars: Matrix|'''Matrix''']]<br />
* Lugar: Vilalba (Lugo)<br />
* Tipo: PrintrBot v2<br />
* '''Generación''': 3<br />
* Autor: Diego Prado ([http://twitter.com/diego_p_g @diego_p_g])<br />
* Impresoras progenitoras: [[Clone wars: Impresora Ociorum|'''Ociroum/Bricolabs''']], [http://fidelfraga.eu/content/impresora-3d '''Guaifi''']<br />
* Conjuntos de piezas impresas: 1<br />
* Nacimiento: 30 de Agosto de 2012 <br />
|<br />
<center> [[File:matrix.jpg|200px]]</center><br />
|---------<br />
| <center>[[File:Clon-55-Y-Wing.jpg|220px]]</center><br />
|<br />
* '''Clon #55''': '''<font color="#0000FF">Y-Wing</font>'''<br />
* '''Lugar''': Universidad de Málaga<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 3<br />
* '''Autor''': Exergy123(Reclone3d.com)<br />
* '''Impresora Progenitora''': X-Wing<br />
* Nacimiento: '''13/Octubre/2012''' a las 20:00<br />
* [MÁS INFORMACIÓN]<br />
| <center>[[File:Y-Wing.jpg|200px]]</center><br />
|---------<br />
| <center>[[File:Clon-71-Liperap.jpg|250px]]</center> <br />
|<br />
* '''Clon #71 ''': <font color="#0000FF">LipeRap</font><br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': Prusa Iteracion 2<br />
* '''Autor''': Pedro Clemente<br />
* '''Impresora progenitora''': Cadesign<br />
* '''Nacimiento''': 22/Oct/2012<br />
|<center>[[File:Liperap-logo.png|250px]]</center> <br />
|-------------<br />
|}<br />
<br />
=== Jedis ===<br />
<br />
* '''Descripción''': Clones terminados, que hayan impreso al menos una pieza<br />
* '''Para subir de categoría''': Imprimir un juego de piezas completo para montar otro clon<br />
<br />
{| class="wikitable" style="width:100%"<br />
|-<br />
|----------<br />
| <center>[[File:Clon GLaDOS.jpg|200px|link=Clone wars:Impresora GLaDOS]]</center> <br />
|<br />
* '''Clon #6''': '''[http://en.wikipedia.org/wiki/GLaDOS GLaDOS]'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': [http://reprap.org/wiki/RepStrap Repstrap]<br />
* '''Generación''': 1<br />
* '''Autor''': Miguel Ángel Herranz<br />
* Nacimiento: '''02/Feb/2012'''<br />
* [[Clone wars:Impresora GLaDOS|MÁS INFORMACIÓN]]<br />
|<br />
<center> [[File:Glados.png|150px|link=Clone wars:Impresora GLaDOS]]</center><br />
|----------<br />
| <center>[[File:Clon-Sonny-1.png|220px|link=Clone wars:Impresora Sonny]]</center><br />
|<br />
* '''Clon #8''': '''<font color="#0000FF">Sonny</font>'''<br />
* '''Luegar''': Universidad Carlos III de Madrid<br />
* '''Familia''': [[Prusa_Mendel_(iteration_1)]] original modificada con piezas V2<br />
* '''Generación''': 1.5<br />
* '''Tipo de aguja''': 0.35 mm<br />
* '''Universidad Carlos III de Madrid'''<br />
* '''Autor''': [http://sites.google.com/site/danielgomezlendinez/ Daniel Gómez]<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:MADRE MADRE]<br />
* Nacimiento: '''7/Febrero/2012'''<br />
* [[Clone wars:Impresora Sonny|MÁS INFORMACIÓN]]<br />
| <center> [[File:Sonny-yo-robot1.png|200px]]</center><br />
|----------<br />
| <center>[[File:Clon debugger 01-r1.jpg|220px|]]</center><br />
|<br />
* '''Clon #11''': '''<font color="#0000FF">Debugger</font>'''<br />
* '''Lugar''': <br />
* '''Familia''': <br />
* '''Generación''': 1<br />
* '''Autor''':<br />
* '''Impresora Progenitora''': Desconocida<br />
* Nacimiento: '''28/Feb/2012 '''<br />
* [[Clone wars:Impresora Debugger|MÁS INFORMACIÓN]]<br />
|<br />
<center> [[File:obsonet_v1b.jpg|150px]]</center><br />
|----------<br />
| <center>[[File:Fenix-bot final 03.JPG|200px|]]</center><br />
|<br />
* '''Clon #12''': '''<font color="#0000FF">Fenix-bot</font>'''<br />
* '''Lugar''': Burgos<br />
* '''Familia''': <br />
* '''Generación''': 1<br />
* '''Autor''': Raúl Barral<br />
* '''Impresora Progenitora''': Desconocida<br />
* Nacimiento: '''11/Marzo/2012'''<br />
* [[Clone wars:Impresora Fenix-bot|MÁS INFORMACIÓN]]<br />
|<br />
<center> [[File:phoenixcolorsmallvs1.jpg|150px]]</center><br />
|-------<br />
| <center>[[File:ATAT.jpg|220px]]</center><br />
|<br />
* '''Clon #14''': '''<font color="#0000FF">AT-AT</font>'''<br />
* '''Lugar''': <br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original<br />
* '''Generación''': 1<br />
* '''Autor''': Xavier Tamarit<br />
* '''Impresora Progenitora''': Desconocida<br />
* Nacimiento: '''12/Abril/2012'''<br />
* [[Clone_wars:Impresora AT-AT|MÁS INFORMACIÓN]]<br />
| <center>[[File:At-at 23949NEG-2.jpg|200px]]</center><br />
|---------<br />
| <center>[[File:Clon-18-han.png|200px]]</center> <br />
|<br />
* '''Clon #18''': '''<font color="#0000FF">Han</font>'''<br />
* '''Lugar''': Santa Bárbara (California, USA)<br />
* '''Familia''': Prusa iteración 2<br />
* '''Generación''': 2<br />
* Autor: [http://www.iearobotics.com/wiki/index.php?title=Andr%C3%A9s_Prieto-Moreno Andrés Prieto-Moreno Torres]<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel:_R2D2 R2]<br />
* '''Nacimiento''': 06/Mayo/2012 <br />
* [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_Han MAS INFORMACIÓN]<br />
|<center> [[File:Han solo.jpg|150px]]</center><br />
|-------------<br />
| <center>[[File:Ukraine-r1.png|200px]]</center> <br />
|<br />
* '''Clon #21''': '''<font color="#0000FF">Ukraine</font>'''<br />
* '''Lugar''': Valencia <br />
* '''Familia''': Printrbot<br />
* '''Generación''': 3<br />
* Autor: Miguel Sánchez<br />
* '''Impresora Progenitora''': Black Misan & Blue Misan<br />
* '''Nacimiento''': 8/Abril/2012<br />
* [[Clone_wars:Impresora Ukraine|MÁS INFORMACIÓN]]<br />
|<center> [[File:Photo.jpg|150px]]</center><br />
|-------------<br />
| <center>[[File:Clon-22-Grifo-r1.jpg|200px]]</center> <br />
|<br />
* '''Clon #22''': '''<font color="#0000FF">Grifo</font>'''<br />
* '''Lugar''': Zamora <br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 1<br />
* Autores: <br />
** Abraham Alvaro Jimenez<br />
** Nerea Alvaro Santos (Mi Hija)<br />
* '''Impresora Progenitora''': Desconocida<br />
* '''Nacimiento''': 18/Mayo/2012<br />
* '''[[Clone_wars:Impresora Grifo|MÁS INFORMACIÓN]]<br />
|<center> [[File:grifo.jpg|150px]]</center><br />
|-----------------<br />
| <center>[[File:Impresora Lucy 2 Junio 2012.jpg|200px|]]</center><br />
|<br />
* '''Clon #24''': '''<font color="#0000FF">Lucy</font>'''<br />
* '''Lugar''': Universidad Autónoma de Madrid<br />
* '''Familia''': [http://www.iearobotics.com/wiki/index.php?title=Clone_wars:_Printrbot Printrbot]<br />
* '''Generación''': 2<br />
* '''Autor''': Carlos García Saura<br />
* '''Impresora Progenitora''': [[Clone wars:Impresora Halcón Milenario|Halcón Milenario]]<br />
* '''Nacimiento''': 01/Jun/2012<br />
* '''[[Clone wars:Impresora Lucy|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Lucy.jpg|100px|]]</center><br />
|-----------<br />
| <center>[[File:Clon-25-Tiefighter.jpg|150px]]</center> <br />
|<br />
* '''Clon #25''': '''<font color="#0000FF">TIE Fighter</font>'''<br />
* TIE Fighters Squadron (Mother Ship: DeathStar)<br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa Mendel Iteracion 2<br />
* '''Generación''': 2<br />
* '''Autor''': Fernando Salceda (klonando)<br />
* '''Impresora Progenitora''': [[Clone wars:Impresora Death Star|Deathstar]]<br />
* '''Nacimiento''': 11/Jun/2012<br />
* [[Clone wars:_TIEFighter|MÁS INFORMACIÓN]]<br />
|<center> [[File:tiefighter.jpg|150px]]</center><br />
<br />
<br />
<br />
|-----------<br />
| <center>[[File:Clon-27-SHODAN.png|200px]]</center> <br />
|<br />
* '''Clon #27''': '''<font color="#0000FF">SHODAN</font>'''<br />
* '''Lugar''': Universidad Politécnica de Madrid<br />
* '''Familia''': [[Prusa_Mendel_%28iteration_2%29|Prusa Iteración 2]]<br />
* '''Generación''': 3<br />
* '''Autor''': Jaime García (elgambitero)<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R3 R3]<br />
* '''Nacimiento''': 17/Jun/2012<br />
* [[Clone wars: Impresora SHODAN|MÁS INFORMACIÓN]]<br />
|<center> [[File:SHODAN.jpeg|150px]]</center><br />
<br />
|-----------<br />
| <center>[[File:Clon-28-Dedalo.jpg|200px]]</center> <br />
|<br />
* '''Clon #28''': '''<font color="#0000FF">Dédalo</font>'''<br />
* '''Lugar''': Universidad Carlos III de Madrid<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 1<br />
* '''Autor''': David Estévez (aka [http://www.thingiverse.com/DEF DEF])<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:PADRE PADRE]<br />
* '''Nacimiento''': 19/Jun/2012<br />
* [[Clone wars: Impresora Dédadlo|MÁS INFORMACIÓN]]<br />
|<center> [[File:daedalus_profile.jpg|150px]]</center><br />
<br />
<br />
|-----------<br />
| <center>[[File:Clon-31-Prusa-popoulus.jpg|200px]]</center> <br />
|<br />
* '''Clon #31''': '''<font color="#0000FF">Prusa-Popoulus</font>'''<br />
* Lugar: Grecia<br />
* Familia: Prusa Mendel Iteration 2<br />
* Generación: 3<br />
* Impresora Progenitora: [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R3 R3]<br />
* Autor: Stathis Fotiadis<br />
* '''Nacimiento''': 30/Jun/2012<br />
* [[Clone wars:Impresora Prusa-popoulus|MÁS INFORMACIÓN]]<br />
: <br />
|<center> [[File:Prusa-popoulus-logo.jpg|150px]]</center><br />
|-----------<br />
| <center>[[File:Clon-33-P1.png|200px]]</center> <br />
|<br />
* '''Clon #33''': '''<font color="#0000FF">P1</font>'''<br />
* Lugar: Universidad Politécnica de Madrid<br />
* Familia: Printrbot original<br />
* Generación: 2<br />
* Impresora Progenitora: Granja de PrintrBot HQ<br />
* Autor: [http://www.iearobotics.com/wiki/index.php?title=Juan_Gonzalez:Main Juan González-Gómez] (Obijuan)<br />
* '''Nacimiento''': 11/Jul/2012<br />
* [http://www.iearobotics.com/wiki/index.php?title=Printerbot:_P1 MAS INFORMACION]<br />
: <br />
|<center> [[File:P1.png|150px]]</center><br />
|-----------<br />
| <center>[[File:Clon-34-Marvin.png|200px]]</center> <br />
|<br />
* '''Clon #34''': '''<font color="#0000FF">Marvin</font>'''<br />
* Lugar: Universidad Carlos III de Madrid<br />
* Familia: Prusa Aire 2<br />
* Generación: 2<br />
* Impresora Progenitora: [[Clone wars:Impresora Mardan|Mardan]]<br />
* Autor: Martin Fodstad Stoelen<br />
* '''Nacimiento''': 12/Jul/2012<br />
* [[Proyecto:MAS INFORMACION|MAS INFORMACION]]<br />
: <br />
|<center> [[File:marvin.jpg|150px]]</center><br />
|--------------------<br />
| <center>[[File:Clon-35-jP.jpg|200px]]</center> <br />
|<br />
* '''Clon #35''': '''<font color="#0000FF">jπ;</font>'''<br />
* Lugar: Universidad Carlos III de Madrid<br />
* Familia: Prusa Aire 2<br />
* Generación: 2<br />
* Impresora Progenitora: [[Clone wars:Impresora Maese Artorius|Maese Artorius]]<br />
* Autor: Itziar Lima Ramos y Juan Pablo Rodríguez García <br />
* '''Nacimiento''': 15/Jul/2012<br />
* [[Proyecto:MAS INFORMACION|MAS INFORMACION]]<br />
: <br />
|<center> [[File:Jpi.jpg|150px]]</center><br />
|--------------------<br />
| <center>[[File:Clon-36-Pepa.jpg|200px]]</center><br />
|<br />
*'''Clon #36''': '''<font color="#0000FF">Pepa</font>'''<br />
* Tipo: Prusa Iteracion 2<br />
* Progenitora: [http://asrob.uc3m.es/index.php/Clone_wars:Impresora_Manuela Manuela]<br />
* Autor: Jose Ignacio Alonso<br />
* Lugar:Valladolid<br />
* '''Nacimiento''': 28/Jul/2012<br />
* [[Clone Wars: Impresora Pepa|MÁS INFORMACIÓN]]<br />
: <br />
|<br />
<center> [[File:cubo-moneda.jpg|200px]]</center><br />
|--------------------<br />
| <center>[[File:Clon37-wendy.jpg|200px]]</center><br />
|<br />
*'''Clon #37''': '''<font color="#0000FF">Wendy</font>'''<br />
* Tipo: Prusa Air 2<br />
* Progenitora: Padre y Madre<br />
* Autor: Nieves Cubo (Nicuma)<br />
* Lugar: Universidad Carlos III de Madrid<br />
* '''Nacimiento''': 03/Agosto/2012<br />
* [[Clone wars:Impresora Wendy|MAS INFORMACIÓN]]<br />
: <br />
|<br />
<center> [[File:Wendy printer.jpg]]</center><br />
|--------------------<br />
| <center>[[File:Abe.jpg|200px]]</center><br />
|<br />
*'''Clon #38''': '''<font color="#0000FF">Abe</font>'''<br />
*''' Tipo''': Prusa Iteracion 2<br />
*'''Progenitora''': [http://fidelfraga.eu/content/impresora-3d Guaifi]<br />
*'''Autor''': Javier Rebollo (Jarec)<br />
*'''Lugar''': Alcala de Guadaira (Sevilla)<br />
* '''Nacimiento''': 11/Agosto/2012<br />
: <br />
|<br />
<center> [[File:Abe's.png|200px]]</center><br />
|--------------------<br />
| <center>[[File:Clon-40-gallia-canarnova.jpg|150px]]</center><br />
|<br />
*'''Clon #40''': '''<font color="#0000FF">Gallia</font>'''<br />
*''' Tipo''': Prusa Iteracion 2<br />
*'''Progenitora''': Madalena<br />
*'''Autor''': Enrique Zanardi<br />
*'''Lugar''': Tenerife<br />
* '''Nacimiento''': 25/Agosto/2012<br />
: <br />
|<br />
<center> [[File:Gallia-logo.jpg|200px]]</center><br />
|---------<br />
| <center>[[File:Clon-43-Tron.jpg|200px]]</center> <br />
|<br />
* '''Clon #43''': [[Clone_Wars:_Tron|'''Tron''']]<br />
* Lugar: Madrid<br />
* Tipo: Prusa iteration 2<br />
* Autor: Ramon Rivas, Edgar Salas y Guillermo Welch (G.W.C.).<br />
* '''Impresora progenitora''': [[Clone wars:Impresora Death Star|Death Star]]<br />
* Nacimiento: 4 de Septiembre de 2012<br />
* [[Clone wars:_Tron|MÁS INFORMACIÓN]]<br />
|<br />
<center> [[File:TronLogo.png|200px]]</center><br />
|-----------<br />
| <center>[[File:Clon-45-PrusaHowarto.jpg|200px]]</center> <br />
|<br />
* '''Clon #45''': '''<font color="#0000FF">Arquímedes</font>'''<br />
* '''Lugar''': Ibiza<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 3<br />
* '''Autor''': Diego Lao (Howarto)<br />
* '''Impresora Progenitora''': [[Clone wars:Impresora Mardan|Mardan]]<br />
* '''Nacimiento''': 6/9/2012 (acabada)<br />
* [[Clone wars: Impresora Por ahora sin nombre|MÁS INFORMACIÓN]]<br />
|<center> [[File:HowartoAvatar.png|150px]]</center><br />
|---------<br />
| <center>[[File:Clone-49-R5D5.jpg|200px|link=Clone_Wars:_R5D5]]</center> <br />
|<br />
* '''Clon #49''': [[Clone Wars: R5D5|'''R5D5''']]<br />
* '''Lugar''': Vitoria-Gasteiz<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Generación''': 1<br />
* '''Autor''': Raul Jimenez.<br />
* '''Impresora progenitora''': Desconocida.<br />
* '''Nacimiento''': 11/Septiembre/2012<br />
* [[Clone wars:RepRap Prusa2 R5D5|MÁS INFORMACIÓN]]<br />
|<br />
<center> [[File:711 4.jpg|150px]]</center><br />
|---------<br />
|<center>[[File:Clon-50-C3po.jpg|200px]]</center> <br />
|<br />
* '''Clon #50''': [[Clone_Wars:_C3PO|'''C3PO''']]<br />
* Lugar: '''Madrid'''<br />
* Tipo: Hibrido PrintrBot-Larabot<br />
* Autor: Alvaro Lara<br />
* Impresora progenitora: Manuela<br />
* Nacimiento: 17 de Septiembre de 2012 <br />
|<br />
<center> [[File:C3po doblado.jpg|200px]]</center><br />
|---------<br />
|<center>[[File:Clon-51-MayPrintr.jpg|200px]]</center> <br />
|<br />
* '''Clon #51''': [[Clone wars:Impresora_MayPrinter|'''MayPrinter''']]<br />
* Lugar: Algeciras (Cádiz)<br />
* Tipo: [http://www.iearobotics.com/wiki/index.php?title=Clone_wars:_Printrbot Printrbot]<br />
* '''Generación''': 2<br />
* Autor: Mariano Dapía ([http://twitter.com/iPadNanito @iPadNanito])<br />
* Impresora progenitora: [[Clone wars:Impresora Potato|'''Potato''']]<br />
* Nacimiento: 12 de Septiembre de 2012 <br />
|<br />
<center> [[File:InvadersMay.png|200px]]</center><br />
|--------------<br />
| <center>[[File:Clon-54-eve.png|200px]]</center><br />
|<br />
* '''Clon #54''': '''<font color="#0000FF">EVE (Nº6)</font>'''<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 2<br />
* '''Autor''': [http://www.mbrobotics.es/MbRobotics/Main.html Miguel Angel Berna Alberola]<br />
* '''Impresora Progenitora''': [http://www.mbrobotics.es/Wiki/index.php?title=JOHNNY5 JOHNNY5] <br />
* '''Electrónica''': [http://reprap.org/wiki/Sanguinololu Sanguinololu]<br />
* '''Firmware''': [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Extrusor''': [http://reprap.org/wiki/Wade%27s_Geared_Extruder Wade's extruder] (plástico de 3mm)<br />
* '''Hot-End''': [http://reprap.org/wiki/J_Head_Nozzle J-Head Mk IV-B]<br />
* Nacimiento: '''09/Octubre/2012'''<br />
| <center>[[File:Eve.png|200px]]</center><br />
|--------------<br />
| <center>[[File:Clone-56-la-cosa.jpg|220px]]</center><br />
|<br />
* '''Clon #56''': '''<font color="#0000FF">La cosa</font>'''<br />
* '''Lugar''': Universidad Carlos III de Madrid<br />
* '''Familia''': Prusa Air 2<br />
* '''Generación''': 2<br />
* '''Autor''': Jorge Rodríguez Marín<br />
* '''Impresora Progenitora''': [[Impresora Progenitora: Demiurgo|Demiurgo]] y [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]]<br />
* '''Nacimiento''': '''30/Septiembre/2012''' a las 12:00<br />
* [[Impresora: la cosa|MÁS INFORMACIÓN]]<br />
| <center>[[File:La-Cosa.png]]</center><br />
|--------------<br />
| <center>[[File:Clone-57-Unicorn.jpg|220px]]</center><br />
|<br />
* '''Clon #57''': '''<font color="#0000FF">Unicorn</font>'''<br />
* '''Lugar''': Universidad Carlos III de Madrid<br />
* '''Familia''': Prusa Air 2<br />
* '''Generación''': 2<br />
* '''Autor''': [http://roboticslab.uc3m.es/roboticslab/persona.php?id_pers=72 Juan G. Victores]<br />
* '''Impresora Progenitora''': [[Impresora Progenitora: Demiurgo|Demiurgo]] y [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]]<br />
* '''Nacimiento''': '''20/Octubre/2012''' a las 23:00<br />
* [[Impresora: unicorn|MÁS INFORMACIÓN]]<br />
| <center>[[File:Clone-57-Unicorn-logo.png|180px]]</center><br />
|--------------<br />
| <center>[[File:Kneesaa.jpg|220px]]</center><br />
|<br />
* '''Clon #58''': '''<font color="#0000FF">Kneesaa</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 2<br />
* '''Autor''': Roberto Cancela (Maxit)<br />
* '''Impresora Progenitora''': [http://www.mbrobotics.es/Wiki/index.php?title=JOHNNY5 JOHNNY5]<br />
* '''Nacimiento''': '''25/Octubre/2012''' a las 16:00<br />
* [MÁS INFORMACIÓN]<br />
| <center>[[File:Kneesa-avatar.jpg|180px]]</center><br />
|--------------<br />
| <center>[[File:Clon-59-JJmachine.png|220px]]</center><br />
|<br />
* '''Clon #59''': '''<font color="#0000FF">JJMachine</font>'''<br />
* '''Lugar''': Málaga<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 2<br />
* '''Autor''': JgemezCW y Jimmmenez<br />
* '''Impresora Progenitora''': Daneel 3-law<br />
* '''Nacimiento''': '''20/Octubre/2012''' a las 12:00<br />
* [MÁS INFORMACIÓN]<br />
| <center> [[File:JJlogo.png|180px]] </center><br />
|--------<br />
| <center>[[File:Dolly_18_Todo_Montado.JPG|220px]]</center><br />
|<br />
* '''Clon #60''': '''<font color="#0000FF">Dolly</font>'''<br />
* '''Lugar''': Alicante<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 3<br />
* '''Autores''': J. Sevila, S. Ors<br />
* '''Impresora progenitora''': The Clon UA<br />
* '''Nacimiento''': '''29/Octubre/2012''' a las 21:00<br />
* '''Electrónica''': [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware''': [https://github.com/ErikZalm/Marlin Marlin]<br />
* '''Extrusor''': Jonaskuehling (plástico de 3mm)<br />
* '''Hot-End''': [http://reprap.org/wiki/J_Head_Nozzle#Mk_IV J Head Nozzle Mk IV]<br />
* [[Clone_wars:_Impresora_Dolly|MÁS INFORMACIÓN]]<br />
| <center>[[File:DollyLogo_clean2.png|180px]]</center><br />
|--------<br />
| <center>[[File:Clon-61-conguito3d.jpg|220px]]</center><br />
|<br />
* '''Clon #61''': '''<font color="#0000FF">Conguito3D</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 2<br />
* '''Autores''': DDREAM<br />
* '''Impresora progenitora''': [http://www.mbrobotics.es/Wiki/index.php?title=JOHNNY5 JOHNNY5]<br />
* '''Nacimiento''': 25/Oct/2012<br />
* [[Clone wars: Impresora Conguito3D|MÁS INFORMACIÓN]]<br />
| <center>[[File:Conguito3D-logo.png|180px]]</center><br />
|--------<br />
| <center>[[File:Clone-62-Hefesto.jpg|220px]]</center><br />
|<br />
* '''Clon #62''': '''<font color="#0000FF">Hefesto</font>'''<br />
* '''Lugar''': Madrid (UC3M)<br />
* '''Familia''': Prusa Air 2<br />
* '''Generación''': 2<br />
* '''Autores''': Fernando Cerezal (y los miembros de Clone Wars)<br />
* '''Impresora progenitora''': [[Impresora Progenitora: Demiurgo|Demiurgo]] y [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]]<br />
* '''Nacimiento''': '''31/Octubre/2012''' a la 1:30<br />
* [[Clone wars: Impresora Hefesto|MÁS INFORMACIÓN]]<br />
| <center>[[File:logoHefesto.jpg|180px]]</center><br />
|---------<br />
| <center>[[File:Laura.jpg|200px]]</center> <br />
|<br />
* '''Clon #63''': '''<font color="#0000FF">Laura Palmer</font>'''<br />
* '''Lugar''': Vicus Spacorum<br />
* '''Familia''': Prusa iteration 2 con mejoras de piezas<br />
* '''Generación''': 3<br />
* '''Autor''': Alfredo Prado [https://twitter.com/radikalbytes @radikalbytes] [http://www.radikalbytes.com radikalbytes.com]<br />
* '''Impresora progenitora''': Guaifi<br />
* '''Nacimiento''': 12 Octubre de 2012<br />
* [[Clone wars: Impresora Laura Palmer|MÁS INFORMACIÓN]]<br />
|<br />
<center> [[File:IMAG0343.JPG|200px]]</center><br />
|----------<br />
| <center>[[File:Clon-64-Ironhide.jpg|200px|]]</center> <br />
|<br />
* '''Clon #64 ''': Irohide<br />
* '''Lugar''': Badajoz<br />
* '''Familia''': Prusa Mendel<br />
* '''Generación''': <br />
* '''Autor''': Ismael De Migel Cantero<br />
* '''Impresora progenitora''': Daneel-3-law<br />
* Nacimiento: '''26/10/2012'''<br />
* [http://imc9.blogspot.com.es/p/impresora-3d.html MÁS INFORMACIÓN]<br />
|<br />
<center>[[File:Ironhide.jpg|200px|]]</center> <br />
|<br />
|----------<br />
| <center>[[File:Orange_Juice.jpg|200px]]</center> <br />
|<br />
* '''Clon #65 ''': <font color="#0000FF">Orange Juice</font><br />
* '''Lugar''': Barcelona<br />
* '''Familia''': Prusa Iteracion 2 con extras:Estabilizador Z y LCD<br />
* '''Autor''': David F.<br />
* '''Impresora progenitora''': Desconocida<br />
* Nacimiento: '''2/11/2012'''<br />
|<br />
<center>[[File:Freshorange.jpg|100px]]</center> <br />
|----------<br />
| <center>[[File:Clon-66-Nexus-6.jpg|250px]]</center> <br />
|<br />
* '''Clon #66 ''': <font color="#0000FF">Nexus 6</font><br />
* '''Lugar''': A Coruña<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Autor''': Milo Barral<br />
* '''Impresora progenitora''': Johnny 5<br />
* '''Nacimiento''': 03/11/2012<br />
|<br />
<center>[[File:Nexus-6-Replicants.jpg|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon-67-T-800.jpg|200px]]</center> <br />
|<br />
* '''Clon #67 ''': <font color="#0000FF">T-800</font><br />
* '''Lugar''': UC3M<br />
* '''Familia''': Prusa Air-2<br />
* '''Autor''': Antonio Castro Gómez<br />
* '''Impresora progenitora''': [[Impresora Progenitora: Demiurgo|Demiurgo]] y [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]]<br />
* '''Nacimiento''': 29/10/2012<br />
|<br />
<center>[[File:Terminator4.jpg|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon-68-Lolita.jpg|200px]]</center> <br />
|<br />
* '''Clon #68 ''': <font color="#0000FF">Lolita</font><br />
* '''Lugar''': UC3M<br />
* '''Familia''': Prusa Air-2<br />
* '''Autores''': David Cabrera Rodríguez y Patricia Alba Talaverano<br />
* '''Impresora progenitora''': [[Impresora Progenitora: Demiurgo|Demiurgo]] y [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]]<br />
* '''Nacimiento''': 04/11/2012<br />
|<br />
<center>[[File:Lolita-logo.png|200px]]</center> <br />
|----------<br />
| <center>[[File:ReciClon.jpg|250px]]</center> <br />
|<br />
* '''Clon #69 ''': <font color="#0000FF">ReciClon</font><br />
* '''Lugar''': Sevilla<br />
* '''Familia''': Prusa Iteracion 2<br />
* '''Autor''': Antonio Escudero<br />
* '''Impresora progenitora''': Mardan<br />
* '''Nacimiento''': 05/11/2012<br />
|<br />
<center>[[File:recicle.jpg|250px]]</center> <br />
|----------<br />
| <center>[[File:Clone-70-restaun3D.jpg|250px]]</center> <br />
|<br />
* '''Clon #70 ''': <font color="#0000FF">Restaun3D</font><br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': Prusa Iteracion 2<br />
* '''Autor''': Roberto Estaun Gil<br />
* '''Impresora progenitora''': x-wing<br />
* '''Nacimiento''': 09/Nov/2012<br />
|<br />
<center>[[File:Cjuan01.jpg|250px]]</center> <br />
|----------<br />
| <center>[[File:Clon-72-terpsicore.jpg|250px]]</center> <br />
|<br />
* '''Clon #72''': <font color="#0000FF">Terpsícore (<font color="#00FF00">R.I.P</font>)</font><br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': [http://reprap.org/wiki/RepRapPro_Huxley/es RepRapPro Huxley]<br />
* '''Autor''': algspd (Javier Briz)<br />
* '''Impresora progenitora''': Daneel 3-law<br />
* '''Nacimiento''': 11/Nov/2012<br />
* [[Clone_wars:Impresora_Terpsicore|Mas información]]<br />
| | <center>[[File:logo_impresora_terpsicore.jpeg|150px]]</center> <br />
|-------------<br />
| <center>[[File:Clon-73-bender-doblador-rodriguez.jpg|200px]]</center> <br />
|<br />
* '''Clon #73''': <font color="#0000FF">Bender Doblador Rodríguez</font><br />
* '''Lugar''': Santa Cruz de Tenerife<br />
* '''Familia''': Printrbot<br />
* '''Autor''': Julián García Roger<br />
* '''Impresora progenitora''': Desconocida<br />
* '''Nacimiento''': 10/Nov/2012<br />
* [[Clone_wars:Impresora_Bender_doblador_rodríguez|Mas información]]<br />
| | <center>[[File:Bender Baby.jpg|150px]]</center> <br />
|-------------<br />
| <center>[[File:Clon-74-LAAT.jpg|200px]]</center> <br />
|<br />
* '''Clon #74''': <font color="#0000FF">LAAT</font><br />
* '''Lugar''': Mislata ( Valencia )<br />
* '''Familia''': Prusa Iteration 2<br />
* '''Autor''': Jorge Balaguer y Antonio Carbonell ( [ http:\\blog.2nand.com 2nand ] )<br />
* '''Impresora progenitora''': X-Wing<br />
* '''Nacimiento''': 20-11-2012<br />
* [[Clone Wars:Impresora LAAT|Mas información]]<br />
| | <center>[[ File: laat2.jpg | 150px]]</center> <br />
|-------------<br />
| <center>[[File:Clon-75-bumblebee.png|200px]]</center> <br />
|<br />
* '''Clon #75''': <font color="#0000FF">Bumblebee</font><br />
* '''Lugar''': Mollet del Vallès (Barcelona)<br />
* '''Familia''': Printrbot v2<br />
* '''Autores''': Ariadna Trueba y Juan Pedro López<br />
* '''Impresora progenitora''': X-Wing<br />
* '''Nacimiento''': 22-11-2012<br />
* [[Clone Wars:Impresora Bumblebee|MÁS INFORMACIÓN]]<br />
| | <center>[[File:Bumblebee-logo.png | 200px]]</center> <br />
|-------------<br />
| <center>[[File:Clone-76-Arturo.jpg|200px]]</center> <br />
|<br />
* '''Clon #76''': <font color="#0000FF">Arturo</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Autor''': Daniel Vallejo Hernando<br />
* '''Impresora progenitora''': 3D-Prisa<br />
* '''Nacimiento''': 20/Nov/2012<br />
* [[Clone Wars:Impresora Arturo|MÁS INFORMACIÓN]]<br />
| | <center>[[File:Clon-76-arturo-logo.png | 150px]]</center> <br />
|-------------<br />
| <center>[[File:Clone-77-alcar.jpg|200px]]</center> <br />
|<br />
* '''Clon #77''': <font color="#0000FF">Alcar</font><br />
* '''Lugar''': Barcelona<br />
* '''Familia''': <br />
* '''Autor''': Jose Sanchez Sanchez<br />
* '''Impresora progenitora''': Manuela<br />
* '''Nacimiento''': 25/Nov/2012<br />
* [[MÁS INFORMACIÓN]]<br />
| | <center>[[File:Alcar-logo.png | 200px]]</center> <br />
|-------------<br />
| <center>[[File:Clon-78-Kubrick.jpg|200px]]</center> <br />
|<br />
* '''Clon #78''': <font color="#0000FF">Kubrick</font><br />
* '''Lugar''': Buenos Aires, Argentina<br />
* '''Familia''': Printrbot V2<br />
* '''Autor''': Javier Marquevichi<br />
* '''Impresora progenitora''': Úterus<br />
* '''Nacimiento''': 20/Nov/2012<br />
* [[Clone Wars: Impresora Kubrick|MÁS INFORMACIÓN]]<br />
| | <center>[[File:Kubrick-logo.png | 200px]]</center> <br />
|-------------<br />
| <center>[[File:Clon-79-SpongeBot.jpg|200px]]</center> <br />
|<br />
* '''Clon #79''': <font color="#0000FF">SpongeBot</font><br />
* '''Lugar''': A coruña<br />
* '''Familia''': Prusa iteración 2<br />
* '''Autor''': Alejandro Taracido (TCRobotics)<br />
* '''Impresora progenitora''': Matrix<br />
* '''Nacimiento''': 27/Nov/2012<br />
* [[MÁS INFORMACIÓN]]<br />
| | <center>[[File:Spongebot-logo.png| 150px]]</center> <br />
|-------------<br />
| <center>[[File:Clone-80-VirPrusa.jpg|200px]]</center> <br />
|<br />
* '''Clon #80''': <font color="#0000FF">VirPrusa</font><br />
* '''Lugar''': Dos Hermanas, Sevilla <br />
* '''Familia''': Prusa i2<br />
* '''Autor''': Francisco Montero<br />
* '''Impresora progenitora''': Michaelmas<br />
* '''Nacimiento''': 29/Nov/2012<br />
* [[Clone Wars: Impresora VirPrusa|MÁS INFORMACIÓN]]<br />
| | <center>[[File:VirPrusa-logo-defecto.png | 200px]]</center><br />
|-------------<br />
| <center></center> <br />
|<br />
* '''Clon #81''': <font color="#0000FF">Neutronium</font><br />
* '''Lugar''': DLabs Zaragoza<br />
* '''Familia''': Prusa Iteracion 2<br />
* '''Autor''': Degenerated Labs<br />
* '''Impresora progenitora''': [[Clone_wars:Impresora_Daneel_3-law|Daneel 3-LAW]]<br />
* '''Nacimiento''': 6/Oct/2012<br />
| | <center></center><br />
|-------------<br />
| <center></center> <br />
|<br />
* '''Clon #82''': <font color="#0000FF">ODo-Matic</font><br />
* '''Lugar''': Albacete<br />
* '''Familia''': Prusa Air 2<br />
* '''Autor''': Ricardo Monsalve<br />
* '''Impresora progenitora''': leapy<br />
* '''Nacimiento''': 2/Dic/2012<br />
| | <center></center><br />
|-------------<br />
| <center>[[File:Droide.jpg|120px]]</center> <br />
|<br />
* '''Clon #83''': <font color="#0000FF">Droide de Protocolo</font><br />
* '''Lugar''': [http://www.aerobot.org.es AEROBOT Club de Robótica], ETS Ingenieros Aeronáuticos, UPM<br />
* '''Familia''': Prusa 2<br />
* '''Responsable''': [http://madebyfrutos.wordpress.com/ Miguel Ángel de Frutos]<br />
* '''Impresora progenitora''': R2D2<br />
* '''Nacimiento''': 3/Dic/2012<br />
| | <center>[[File:Logo_Aerobot.png|150px]]</center><br />
|-------------<br />
| <center></center> <br />
|<br />
* '''Clon #84''': <font color="#0000FF">i3-misan (temporal)</font><br />
* '''Lugar''': <br />
* '''Familia''': Prusa i3<br />
* '''Autor''': Miguel Sánchez (Misan)<br />
* '''Impresora progenitora''': <br />
* '''Nacimiento''': <br />
| | <center></center><br />
|-------------<br />
| <center></center> <br />
|<br />
* '''Clon #85''': <font color="#0000FF">Maniotas</font><br />
* '''Lugar''': Vigo<br />
* '''Familia''': Prusa i2<br />
* '''Autor''': Pablo Martínez & Rita López <br />
* '''Impresora progenitora''': R2-Reloaded<br />
* '''Nacimiento''': 3/Dic/2012<br />
| | <center></center><br />
|-------------<br />
| <center></center> <br />
|<br />
* '''Clon #86''': <font color="#0000FF">Machado</font><br />
* '''Lugar''': <br />
* '''Familia''': <br />
* '''Autor''': <br />
* '''Impresora progenitora''': <br />
* '''Nacimiento''': 4/Dic/2012<br />
| | <center></center><br />
|--------------<br />
| <center>[[File:Roi.jpg|200px]]</center> <br />
|<br />
* '''Clon #87''': '''<font color="#0000FF">Roi</font>'''<br />
* '''Lugar''': CAR (Arganda del Rey, Madrid)<br />
* '''Familia''': Prusa 2 con alguna pieza metálica mecanizada<br />
* '''Generación''': 3<br />
* '''Autor''': Juan Carlos Liébana (CAPI)<br />
* '''Nacimiento''': 4/Dic/2012<br />
* '''Impresora progenitora''': [http://reprap.org/wiki/Clone_Wars:_Othon Othon]<br />
* [[Clone_Wars:_Roi|'''MÁS INFORMACIÓN''']]<br />
|<br />
<center> [[File:|200px]]</center><br />
|----------<br />
| <center>[[200px]]</center> <br />
|<br />
* '''Clon #88''': '''<font color="#0000FF">Leapy</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa Air 2<br />
* '''Generación''': 1<br />
* '''Autor''': LeapTo3D<br />
* '''Nacimiento''': 6/Oct/2012<br />
* '''Impresora progenitora''': <br />
* [[Clone Wars: Leapy|'''MÁS INFORMACIÓN''']]<br />
|<br />
<center> [[File:|200px]]</center><br />
|----------<br />
|}<br />
<br />
== Clones virtuales ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
|- <br />
| <center>[[File:Prusa2-blender-ren1.png|200px|link=http://www.iearobotics.com/wiki/index.php?title=Prusa2_Blender]]</center><br />
|<br />
* '''Nombre''': '''<font color="#0000FF">Prusa2 Blender</font>'''<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] (iteración 2)<br />
* '''Herramienta de diseño''': Blender 2.5<br />
* '''Nacimiento''': 20/Agosto/2012<br />
* [http://www.iearobotics.com/wiki/index.php?title=Prusa2_Blender MÁS INFORMACIÓN]<br />
| <center>[[File:Blender logo.png|200px]] </center><br />
|---- <br />
| <center>[[File:Prusai3 Render David.png|250px|link=http://www.reprap.org/wiki/Clone_Wars:_Prusa3_Pulpo]]</center><br />
|<br />
* '''Nombre''': '''<font color="#0000FF">Prusa3 Pulpo</font>'''<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] (iteración 3)<br />
* '''Herramienta de diseño''': AutoCAD y Blender 2.5<br />
* '''Nacimiento''': 5/Noviembre/2012<br />
* [http://www.reprap.org/wiki/Clone_Wars:_Prusa3_Pulpo MÁS INFORMACIÓN]<br />
| <center>[[File:Tron&co.jpg|200px]] </center><br />
|}<br />
----<br />
<br />
== Clones en la academia Jedi ==<br />
<br />
En la academia Jedi se encuentran '''todos los clones en construcción'''. Una vez que imprimen su primera pieza alcanzan la categoría de Jedi y salen de la Academia<br />
<br />
{| class="wikitable"<br />
|- <br />
| [[File:Clone-wars-jedi-academy.png|150px|link=Clone wars: Academia Jedi]]<br />
| [[Clone wars: Academia Jedi/es|ACCESO A LA ACADEMIA JEDI]]<br />
|}<br />
<br />
== Clones en Carbonita ==<br />
Clones sin actividad durante bastante tiempo. Posiblemente hayan abandonado el proyecto<br />
<br />
{| class="wikitable"<br />
|- <br />
| [[File:Han-solo-carbonita.jpg|150px|link=Clone wars: Clones en Carbonita]]<br />
| [[Clone wars: Clones en Carbonita| CLONES EN CARBONITA]]<br />
|}<br />
<br />
==Hot-ends==<br />
<br />
Hot-ends desarrollados por la comunidad de Clone Wars:<br />
<br />
{| class="wikitable" style="width:100%"<br />
|- <br />
| <center>[[File:shivav03.jpg|250px|link=http://www.reprap.org/wiki/Shiva_Hot-End]]</center><br />
|<br />
* '''Nombre''': '''<font color="#0000FF">Shiva</font>'''<br />
* '''Version''': v0.3 (Estable)<br />
* '''Autor''': Exergy123<br />
* '''Basado en''': J-Head MK-IV y Parcan v1<br />
* '''Nacimiento''': 27/Noviembre/2012<br />
* [http://www.reprap.org/wiki/Shiva_Hot-End MÁS INFORMACIÓN]<br />
| <center>[[File:shiva_logo.jpg|200px]] </center><br />
|---- <br />
| <center>[[File:???.png|250px|link=http://www.reprap.org/wiki/Clone_Wars:_Prusa3_Pulpo]]</center><br />
|<br />
* '''Nombre''': '''<font color="#0000FF">SPBudas</font>'''<br />
* '''Autor''': <br />
* '''Basado en''': Budas<br />
* '''Nacimiento''': <br />
* [http://www.reprap.org/wiki/Clone_Wars MÁS INFORMACIÓN]<br />
| <center>[[File:logo_no.jpg|200px]] </center><br />
|}<br />
<br />
== Modelos de impresoras para construir ==<br />
=== Mećanica ===<br />
{| class="wikitable" <br />
|---------<br />
| <center>[[File:Logo-prusa I2.png|200px|link=Clone wars: Prusa Iteración 2]]</center><br />
| '''<font color="#0000FF">Prusa Iteration 2</font>'''<br />
* [[File:Icono ok.png]] Validada<br />
* Número de clones: '''11'''<br />
* [[Clone wars: Prusa Iteración 2|INSTRUCCIONES]]<br />
|<br />
* '''Piezas imprimibles''': 51<br />
* '''Tiempo de impresión''': 21 horas<br />
* '''Area de impresión''': 20x20x15 cm<br />
|---------<br />
| <center>[[File:Prusa-mold-logo2.png|200px|link=Clone wars: Prusa Mold]]</center><br />
| '''<font color="#0000FF">Prusa Mold</font>'''<br />
* [[File:Obras.jpg|30px]] En construcción<br />
* Número de clones: 0<br />
* [[Clone wars: Prusa Mold|INSTRUCCIONES]]<br />
|<br />
* Es una Prusa Iteración 2 hecha a partir de '''moldes de silicona'''<br />
|---------<br />
| <center>[[File:Printrbot-logo.png|150px|link=Clone wars: Printrbot]]</center><br />
| '''<font color="#0000FF">Printrbot V1</font>'''<br />
* [[File:Obras.jpg|30px]] En construcción<br />
* Número de clones: '''3'''<br />
* [[Clone wars: Printrbot|INSTRUCCIONES]]<br />
|<br />
* '''Piezas imprimibles''': 23<br />
* '''Tiempo de impresión''': 14 horas<br />
* '''Area de impresión''': 12.7x12.7x12.7 cm<br />
|------------<br />
| <center>[[File:PrintrbotV2-logo.png|150px|link=Clone wars: Printrbot]]</center><br />
| '''<font color="#0000FF">Printrbot V2</font>'''<br />
* [[File:Obras.jpg|30px]] En construcción<br />
* Número de clones: '''3'''<br />
* [[Clone wars: Printrbot v2|INSTRUCCIONES]]<br />
|<br />
* '''Piezas imprimibles''': 23<br />
* '''Tiempo de impresión''': 14 horas<br />
* '''Area de impresión''': 12.7x12.7x12.7 cm<br />
|------------<br />
| <center>[[File:Logo-prusa I3.png.jpg|200px|link=Clone_wars: Prusa iteración 3]]</center><br />
| '''<font color="#0000FF">Prusa iteración 3</font>'''<br />
* [[File:Obras.jpg|30px]] En construcción<br />
* Número de clones: 0<br />
* [[Clone_wars: Prusa iteración 3| INSTRUCCIONES]]<br />
|<br />
* '''Piezas imprimibles''': <br />
* '''Tiempo de impresión''': <br />
* '''Area de impresión''': 20x20x20 cm<br />
|------------<br />
| <center>[[File:rockstock_2.png|200px|link=Clone_wars: Rostock]]</center><br />
| '''<font color="#0000FF">Rostock</font>'''<br />
* [[File:Obras.jpg|30px]] En construcción<br />
* Número de clones: 0<br />
* [[Clone_wars: Rostock| INSTRUCCIONES]]<br />
|<br />
* '''Piezas imprimibles''': <br />
* '''Tiempo de impresión''': <br />
* '''Area de impresión''': 20x20x40 cm<br />
|}<br />
<br />
* [http://reprap.org/wiki/Wallace RepRap Wallace]. Variante de printrbot<br />
* [http://www.thingiverse.com/thing:15599 Galileo en Thingiverse]. [http://reprap.org/wiki/Galileo Galileo en Reprap]<br />
* [http://www.thingiverse.com/thing:15611 Alu Reprap]<br />
* [http://www.thingiverse.com/thing:16076 Aluminium Mendel]<br />
* [http://www.thingiverse.com/thing:16216 Quantum ORD]. ([http://www.buildlog.net/blog/2012/01/the-quantum-ord-bot/ Más información])<br />
* [http://reprap.org/wiki/Tantillus Tantillus] Una impresora super pequeña y transportable.<br />
<br />
=== Electrónica ===<br />
* [[File:Icono ok.png]] [http://reprap.org/wiki/RAMPS_1.2 RAMPS 1.2] + [http://arduino.cc/en/Main/ArduinoBoardMega2560 Arduino Mega 2560]<br />
** Buenas instrucciones para soldar la placa: [http://printthat.wordpress.com/2011/02/11/reprap-ramps-build/ en este enlace]<br />
** [http://reprap.org/mediawiki/images/6/60/Rampswire12.svg Esquema de conexionado]<br />
* [[File:Icono ok.png]] [http://reprap.org/wiki/RAMPS_1.3 RAMPS 1.3] + [http://arduino.cc/en/Main/ArduinoBoardMega2560 Arduino Mega 2560]<br />
* [[File:Icono ok.png]][http://reprap.org/wiki/Sanguinololu Sanguinololu]<br />
* [[File:Icono ok.png]][http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4] + [http://arduino.cc/en/Main/ArduinoBoardMega2560 Arduino Mega 2560]<br />
* [[File:Icono ok.png]][http://reprap.org/wiki/Generation_7_Electronics Gen7]<br />
* Base caliente: <br />
** [http://reprap.org/wiki/PCB_Heatbed Instrucciones de montaje]<br />
** [http://josefprusa.cz/pcb-heatbed-final-mounting-and-wiring-solutio Más información]<br />
<br />
=== Firmware ===<br />
<br />
* [[File:Icono ok.png]] [https://github.com/kliment/Sprinter Sprinter]<br />
* [[File:Icono ok.png]] [https://github.com/ErikZalm/Marlin Marlin]<br />
* [https://github.com/repetier/Repetier-Firmware Repetier]<br />
* [http://reprap.org/wiki/Teacup_Firmware Teacup]<br />
<br />
=== Software ===<br />
* [[File:Icono ok.png]] [https://github.com/kliment/Printrun Pronterface]<br />
* [[File:Icono ok.png]] [http://replicat.org/ ReplicatorG]<br />
* [[File:Icono ok.png]] [https://github.com/timschmidt/repsnapper Repsnapper] ([http://reprap.org/wiki/RepSnapper_Manual:Introduction Manual]) La version de Windows solo hace slicing de momento, no tiene todas las funciones.<br />
* [[File:Icono ok.png]] [http://fabmetheus.crsndoo.com/files/41_reprap_python_beanshell.zip Skeinforge 41] ([http://fabmetheus.crsndoo.com/ Página de descarga])<br />
* [[File:Icono ok.png]] [http://slic3r.org/ slic3r] ([http://richrap.blogspot.com/2012/01/slic3r-is-nicer-part-1-settings-and.html Tutorial], en Inglés)<br />
* [http://daid.github.com/Cura/ Cura]<br />
* [https://github.com/repetier/Repetier-Host/wiki Repetier-Host]<br />
* [http://www.arduteka.com/2012/12/software-cura-para-impresion-3d-sprinter-vs-marlin Tutorial de '''ARDUTEKA''' sobre CURA, Marlin y Sprinter!!]<br />
* Todos estos programas y más en la [[Clone Wars Distro]]!<br />
<br />
== Clon wars Legacy ==<br />
<br />
Impresoras que hemos documentando y construido pero que ya están obsoletas. Se ponen en esta sección por motivos históricos<br />
<br />
{| class="wikitable" <br />
|---------<br />
| <center>[[File:PrusaMendel.png|200px|link=Clone wars: Prusa Mendel original]]</center><br />
| '''<font color="#0000FF">Prusa Mendel original</font>'''<br />
* Número de clones: '''17'''<br />
* [[Clone wars: Prusa Mendel original|INSTRUCCIONES]]<br />
|<br />
* '''Piezas imprimibles''': 49<br />
* '''Tiempo de impresión''': 19 horas (aproximado)<br />
* '''Area de impresión''': 20x20x15 cm<br />
* Este fue el primer modelo de impresora que construimos en Clon wars<br />
|---------<br />
|}<br />
<br />
== Instrucciones ==<br />
<br />
=== Eje plano de los motores ===<br />
Los motores paso a paso suelen venir con un eje redondeado. Para que las poleas queden bien ajustadas y no resbalen sobre el eje, conviene aplanar una de las caras<br />
* [https://www.youtube.com/watch?v=DBnKPEnt9a4 vídeo explicativo] (inglés).<br />
* Pieza para hacerlo fácilmente: [http://www.thingiverse.com/thing:15133 Soporte para motor]<br />
<br />
=== Calibración ===<br />
* [http://asrob.uc3m.es/index.php?title=Prusa_Mendel:_Skeinforge Guía de calibración para las Prusas]<br />
<br />
=== Calibración Skeinforge ===<br />
* [[Calibracion_Skeinforge_CW|Guía de calibración de Skeinforge]]<br />
* [http://thefutureis3d.com/node/193 Vídeo tutoriales Skeinforge ] (Inglés)<br />
<br />
=== Introducción a Cura ===<br />
*[[Introducción_a_Cura|Introducción a Cura]]<br />
<br />
=== Base de cristal ===<br />
Sobre la base caliente se sitúa opcionalmente un cristal ([http://www.reprap.org/wiki/File:Halcon_Milenario_19_z_base_vidrio.jpg Clon Halcón Milenario]). La base caliente es un PCB (un placa de circuito impreso) que se curva. Para que la aguja se mueva siempre sobre una base totalmente rígida, se puede colocar una base de cristal.<br />
* [http://www.youtube.com/watch?v=X9rGvW3ZjZQ Vídeo de Prusa] explicando cómo lo prepara<br />
* [http://dx.com/pet-heat-resistant-high-temperature-adhesive-tape-24mm-33m-20-250-c-21361 Cinta que usa en el vídeo]<br />
<br />
* Dimensiones del cristal: 210x210mm Grosor de 5mm (o menos). Chaflán de 15mm de lado en las esquinas.<br />
<br />
* '''OTRA OPCIÓN''': Utilizar [http://www.ikea.com/es/es/catalog/products/60074007/?query=60074007 Estos espejos de IKEA]! [http://www.youtube.com/watch?v=9SVnLpBq0x0 Vídeo de una Prusa imprimiendo en un Espejo de IKEA]. Precio: 1.50€ la Unidad!!<br />
<br />
== Documentación ==<br />
* [http://mendelmax.com/tikiwiki/tiki-index.php?page=Choosing+Belts+and+Pulleys&highlight=choosing%20belts Poleas y Correas]. Artículo muy bueno sobre las correas y poleas que conviene utilizar para las impresoras 3D (en inglés)<br />
* [http://blog.reclone3d.com/2012/07/prusa-2-guia-de-solucion-de-problemas/ Guía de solución de problemas]. Pequeña guía sobre fallos comunes en las primeras horas de impresión.<br />
* [http://git-scm.com/book/en Libro sobre Git], para aprender a manejar el repositorio de Clone wars<br />
* [http://reprap.org/wiki/The_incomplete_reprap_beginner%27s_guide/es Guia de Principiantes de RepRap] Aun se esta traduciendo, pero es una muy buena ayuda si estas empezando.<br />
* [http://www.reprap.org/wiki/Clone_wars:_Glosario Glosario] de terminos con explicaciones muy bueno. Recomendable su lectura si estas empezando.<br />
== Multimedia ==<br />
<br />
{| class="wikitable" style="text-align:center" border="0"<br />
! align="center" colspan="3" | [[Clon_wars:_Album_de_Fotos | Ver Álbum de Fotos completo]]<br />
|- align="center"<br />
| [[File:DSC04024.JPG|200px|link=Clon_wars:_Album_de_Fotos]]<br>'''31/Dic/2011''': Piezas impresas <br> por el Clon R2D2<br />
| [[File:R2D2-cubo-1.jpg|200px|link=Clon_wars:_Album_de_Fotos]]<br>'''24/Dic/2011''': El clon R2D2 ha <br> impreso su primera pieza<br />
| [[File:DSC03885.JPG|200px|link=Clon_wars:_Album_de_Fotos]]<br>'''16/Dic/2011''': Tercera reunión <br> de Clone Wars<br />
|}<br />
<br />
<br />
{| class="wikitable" style="text-align:center" <br />
! align="center" colspan="3" border="0" | [[Clone wars: Album de Videos| Ver Álbum de Vídeos completo]]<br />
|- <br />
|| <videoflash>tDHL7AZm_y8|300|250</videoflash><br />
|| <videoflash>oC_1Tjw196Y|300|250</videoflash><br />
|-<br />
|| '''24/Dic/2011''': Clon R2D2. <br> Primera impresión del Clon R2D2<br />
|| '''20/Dic/2011''': Clon R2D2. <br> Probando el extrusor<br />
<br />
|}<br />
<br />
== Tiendas ==<br />
Sección donde se listan por orden alfabético las tiendas donde es posible encontrar componetes para tu impresora 3d:<br />
=== On-line España ===<br />
* [http://store.bcndynamics.com/ BCNDynamics] (España)<br />
* [http://filamentoabs.com/ FilamentoABS] (España). Envíos gratis a Madrid<br />
* [http://leapto3d.com/ LeapTo3D] (España) - Kits completos con TODO incluido. Recogida gratuita en Madrid.<br />
* [http://printallthethings.com Printallthethings] (España) PLA del bueno en tu casa al día siguiente.<br />
* [http://shop.reclone3d.com/es/ Reclone3D] (España)Envíos GRATIS a toda España<br />
* [http://www.reprapbcn.com/catalog/ Reprapbcn] (España)<br />
* [http://menextech.com/prestashop/index.php/prestashop/index.php MeNexTech] (España)<br />
* [http://es.rs-online.com/web/ RS Amidata] (España) El punto de recogida está en [http://es.rs-online.com/web/generalDisplay.html?id=aboutRS&file=tc Getafe]!! Yo he ido una vez, pides cualquier cosa desde la web (no hay pedido mínimo) y en 2 horas puedes pasarte a recogerlo sin pagar envíos.<br />
<br />
=== On-line ===<br />
* [http://www.mendel-parts.com/ Mendel parts] (Holanda)<br />
* [http://www.xyzprinters.com/ http://www.xyzprinters.com/] (Holanda)<br />
* [http://shop.arcol.hu/ arcol.hu] (Hungría) <br />
* [https://shop.grrf.de/ German RepRap fundation] (Alemania)<br />
* [http://reprapsource.com/ reprapsource.com]<br />
* [http://reprapworld.com/ Reprap world] (Holanda)<br />
* [http://www.hotends.com/ hotends]<br />
* [http://www.orbi-tech.de/index_english.htm Orbi-tech]. Plástico (Alemania)<br />
* [http://reprap-3d-printer.com/ Reprap-3D-printer] (Francia)<br />
* [http://www.makergear.com/ Makergear] (EEUU)<br />
* [http://www.lulzbot.com/en/ Lulzbot] (EEUU)<br />
* [http://gala-automation.com/ Gala automation] (EEUU)<br />
* [http://techpaladin.com/ techpaladin] (EEUU)<br />
* [http://www.centralreprap.com/prestashop/ CentralReprap]<br />
* [http://ultimachine.com/ Ultimachine] (EEUU)<br />
* [http://www.goodluckbuy.com/ http://www.goodluckbuy.com/]. Tienda en china donde venden motores, varillas roscadas...<br />
* [http://www.futurlec.com/ Futurlec] Electrónica en general<br />
* [http://www.taydaelectronics.com/ Tayda Electronics] Electrónica en general<br />
* [http://www.dealextreme.com/ Dealextreme] Tienda china con prácticamente cualquier cosa. (contrasta precios antes de comprar)<br />
* [http://www.bitsbox.co.uk/ BitsBox] Componentes electrónicos, algunos especialmente baratos. Envía por ~3€<br />
* [http://www.emakershop.com/ eMAKERshop] Tienda online que vende productos de varios vendedores externos, como un portal de venta.<br />
* [http://www.zappautomation.co.uk/index.php?language=ES Zappautomation] Tienda con todo tipo de productos para CNCs (UK)<br />
* [http://makemendel.com/ Makemendel]<br />
* [http://www.reprap.cc/ Reprap Austria] Tienda de todo tipo de material para Reprap tambien en ebay: [http://www.ebay.es/sch/reprapper/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686 reprapper]<br />
<br />
=== Físicas ===<br />
* [[Clone_wars:_Tiendas_en_barcelona|Barcelona]]<br />
* [[Clone_wars:_Tiendas_en_madrid|Madrid]]<br />
* [[Clone_wars:_Tiendas_en_zaragoza|Zaragoza]]<br />
* [[Clone_wars:_Tiendas_en_galicia|Galicia]]<br />
* [[Clone_wars:_Tiendas_en_castellon|Castellón]]<br />
<br />
=== Lista negra de tiendas ===<br />
Tiendas con las que hemos tenido malas experiencias:<br />
* [http://redwizard3d.com/ Rewizard3D] (UK). El tío que lo lleva, Darren Sim, es un impresentable. Tras 2 meses de espera para las piezas de R3, todavía no las tengo, no me ha devuelto el dinero tampoco y no responde a mis correos. '''¡NO COMPRAR AQUÍ!'''<br />
* [http://myworld.ebay.es/drumas09/ drumas09] (UK). Este vendedor no envía los pedidos. Pedro tuvo un problema con este vendedor.<br />
<br />
== Servicios de Corte ==<br />
<br />
'''Cortenfrio'''<br />
*Empresa de corte en frio ubicada en Zaragoza.<br />
*[http://cortenfrio.com/index.htm Cortenfrio]<br />
<br />
'''Laserebro'''<br />
*Son un grupo de empresas con muchas sedes, tienes una cerca de casa seguro :D mira en el mapa de localizacion, en su web, en el apartado: Grupo Láser Ebro.<br />
*[http://www.laserebro.com/frame1.htm Laserebro]<br />
<br />
'''Naivan'''<br />
*Empresa de corte por Laser y otros servicios en Vitoria.<br />
*[http://www.naivan.com/ Naivan]<br />
*Email para enviar los planos de corte: naivan@naivan.com (enviar en dxf o pdf acotado)<br />
*Teléfono:945 259 857<br />
<br />
== Noticias ==<br />
<br />
* '''03/Dic/2012''': Primera entrega de piezas impresas por HORI a Carlos Manuel Navio para el LEEM<br />
:{| class="wikitable"<br />
|- <br />
| [[File:HoriCarlosdeManuel.jpg|200px| (''Click para ampliar'') ]]<br />
|}<br />
<br />
* '''24/Nov/2012''': Novena donación de R2-Reloaded: Para Diego del campo, de madrid. Hace la entrega la mujer de Obijuan en su nombre :-)<br />
:{| class="wikitable"<br />
|- <br />
| [[File:20121130 132648.jpg|200px| (''Click para ampliar'') ]]<br />
|}<br />
<br />
* '''24/Nov/2012''': Octava donación de R2-Reloaded: Para Nuria Almodóvar, de madrid<br />
:{| class="wikitable"<br />
|- <br />
| [[File:DSC01843.JPG|200px| (''Click para ampliar'') ]]<br />
|}<br />
<br />
* '''21/Nov/2012''': Migración de la wiki COMPLETADA. Anteriormente estaba alojada en [http://asrob.uc3m.es/index.php/Proyecto:_Clone_wars la wiki de asrob]<br />
<br />
* '''17/Nov/2012''': <br />
** Clone wars en la [http://oshwdem.wordpress.com/ OSHWDEM] en Coruña<br />
** Donaciones de piezas de Úterus y R2-Reloaded en la OSHWDEM, para Eladio Fernandez y Santiago Prego<br />
:{| class="wikitable"<br />
|- <br />
| [[File:Donacion-uterus-r2-reloaded-oshwdem2012.jpg|200px| (''Click para ampliar'') ]]<br />
|}<br />
<br />
* '''31/Oct/2012''': Alfonso López (Locar, Murcia) ha recibido las piezas (cuarta donación de R2-Reloaded)<br />
:{| class="wikitable"<br />
|- <br />
| [[File:Donacion-alfonso-lopez.jpg|200px| (''Click para ampliar'') ]]<br />
|}<br />
<br />
* '''30/Oct/2012''': Quinta donación de R2-Reloaded: para Fernando Remiro<br />
:{| class="wikitable"<br />
|- <br />
| [[File:DSC01756.JPG|200px| (''Click para ampliar'') ]]<br />
|}<br />
<br />
* '''26/Oct/2012''': Tercera donación de R2-Reloaded: Para Pablo Martínez<br />
:{| class="wikitable"<br />
|- <br />
| [[File:Donacion-r2-reloaded-pablo-song.jpg|200px| (''Click para ampliar'') ]]<br />
|}<br />
<br />
* '''21/Oct/2012''' Primera donación de piezas de 3D Prisa a Juguetrónica. 3D Prisa asciente a Jedi Máster<br />
:{| class="wikitable"<br />
|- <br />
| [[File:Donacion-3D-prisa-1.jpg|200px| (''Click para ampliar'') ]]<br />
|}<br />
<br />
* '''18/oct/2012''': Segunda donación de piezas de R2-Reloaded. Para christian Mendoza<br />
:{| class="wikitable"<br />
|- <br />
| [[File:20121021 005620.jpg|200px| (''Click para ampliar'') ]]<br />
|}<br />
<br />
* '''13/Oct/2012''': Pablo clemente, Cole y Obijuan estuvieron en la Vilanet party: [https://plus.google.com/u/0/photos/109138697406392447933/albums/5799112397064370385 Fotos]<br />
* '''13/Oct/2012''': Y-Wing ya es Jedi!X-Wing se convierte en Consejero Jedi.<br />
* '''11/Oct/2012''': Donación de piezas de una Prusa 2: De R2-Reloaded a AETEL<br />
:{| class="wikitable"<br />
|- <br />
| [[File:DSC01690.JPG|200px| (''Click para ampliar'') ]]<br />
|}<br />
* '''01/Oct/2012''': Se anuncia la [[Campaña de donación de piezas. Octubre 2012|campaña de donación de Octubre]]!<br />
* '''25/Sep/2012''': Finalización de la OSHWCon 2012. Comienza la migración a la nueva página de RepRap.<br />
* '''21/Sep/2012''': Comienza la OSHWCON, en la que el proyecto Clone Wars esta presente con varias impresoras.<br />
* '''18/Sep/2012''': Matrix ya es Jedi! ''' Ya hay 50 Clones!!!'''<br />
* '''17/Sep/2012''': C3PO ya es Jedi! --> Manuela asciende a la máxima categoría: Máster de la Orden Jedi!<br />
* '''13/Sep/2012''': 3D Prisa(Fernando Remiro) ya es Jedi!<br />
* '''12/Sep/2012''': May ya es Jedi!<br />
* '''11/Sep/2012''': R5D5 ya es Jedi!<br />
* '''07/Sep/2012''': Othon ya es Jedi!<br />
* '''06/Sep/2012''': Sin Nombre(Howarto) ya es Jedi!<br />
<br />
<br />
{| class="bluetable" style="width:100%"<br />
|- style="background:#8da7d6;"<br />
! '''[[Clone_wars:_Evolucion|NOTICIAS ANTERIORES]]'''<br />
|}<br />
<br />
== Repositorio ==<br />
* Repositorio github: [https://github.com/Obijuan/Clone-wars https://github.com/Obijuan/Clone-wars]<br />
<br />
== Enlaces ==<br />
<br />
* [http://reprapbook.appspot.com/ Building your own 3D printer!]<br />
* [http://asrob.uc3m.es/index.php/Proyecto:_Clone_wars Wiki antigua]<br />
<br />
== Distribución Linux Clone Wars ==<br />
<br />
* [[Clone Wars Distro|Clone Wars Distro. Distribución basada en Ubuntu 12.04]]<br />
<br />
== Los viajes de Clone Wars ==<br />
<br />
* [[Clone Wars: Viajes CloneWars|Las visitas de CloneWars]]<br />
<br />
[[Category:Clone wars/es| Clone Wars ]]</div>
Pablog
https://reprap.org/mediawiki/index.php?title=Printrbot&diff=74038
Printrbot
2012-12-06T14:27:20Z
<p>Pablog: /* Project Goal */</p>
<hr />
<div>{{Development<br />
<!--Header--><br />
|name = Printrbot<br />
|status = working<br />
<!--Image--><br />
|image = Printrbot.jpg<br />
<!--General--><br />
|description = the simplest, cheapest, RepRap 3D printer in the world.<br />
|license = [[Wikipedia:Share-alike|CC-BY-SA]]<br />
|author = abdrumm<br />
|reprap = ???<br />
|categories = {{tag|Printrbot}}<br />
|cadModel = [http://www.thingiverse.com/thing:16990 THE Printrbot: thing:16990]<br />
|url = http://printrbot.com/<br />
<br />
}}<br />
<br />
'''Printrbot''' is the simplest, cheapest, RepRap 3D printer in the world. There are also laser cut versions - the printrbot LC (laser cut), and the Printrbot+ (Plus).<br />
<br />
Happy Printing,<br />
Brook Drumm<br />
<br />
== Project Goal ==<br />
<br />
The overall goal is not to win the [[Gada Prize]] - although I would be proud :), rather, the goal is to offer a printer that kids can put together and operate. My dream is to provide every school with a Printrbot... and that every Printrbot will produce offspring that produces offspring (...etc....) until every home and school has a 3D printer.<br />
<br />
== Overview ==<br />
<br />
'''One 3D Printer Per Home''' is a huge goal. In reality, only some students will even WANT a 3D printer, so that lowers the bar significantly. My short-term goal is to provide Printrbot 3D printers to any school interested-- AT LOW COST, so that the students '''who want them''' can use the school Prinrbot to print the parts to make a Printrbot.... just add electronics, stepper motors, smooth and threaded rod. Through our "Print It Forward" program, we will ask each school to print, assemble and donate a Printrbot to 3 other schools. Although everyone is welcome to source their own parts, Printrbot.com will offer discounts to make this feasible. By relying on schools and Printrbot owners to print 3 other sets of parts to construct a Printrbot, we hope to spread the RepRap love far and wide!<br />
<br />
== Project Description==<br />
<br />
Printrbot is a reality. This is a real 3D printer that prints TODAY. I have designed this printer myself, only using other people's work for optional items. <br />
<br />
The non-original parts used are:<br />
*Your choice of extruder<br />
*2x belt pulleys<br />
*2x Z-couplers<br />
<br />
===Three Designs: Printrbot Original, -Junior and -Senior=== <br />
*The Printrbot is the original design that has a medium sized printbed, and aims at the sweet-spot between practicality and price.<br />
**[http://www.thingiverse.com/thing:16990 Thingiverse: Printrbot], all printable parts<br />
*The Printrbot Junior is the ultra-small, ultra-cheap version that pushes the boundaries of size, cost and simplicity for a 3D printer, to lower the barriers to entry for 3D printing at home. <br />
*The Printrbot Senior (Gada Edition) will be the special version built specifically for the Gada Prize. While I am grateful that the Gada prize is pushing the technology forward, I believe that 3D printers that have lesser specifications (than the Gada Prize rules dictate) will still be greatly useful for families everywhere. <br />
<br />
Note: according to the official [http://humanityplus.org/wp-content/uploads/2011/02/HumanityRepRapGrandPersonalManufacturingPrize.pdf Gada Prize Rules] - I formally am using the "no derivatives for the Gada Prize” clause. I believe the approach I am using is unique and original to my design.<br />
<br />
'''UPDATE: 11-13-2012... the Printrbot jr.'''<br />
The Printrbot Kickstarter completely consumed my life for the last year. Transitioning to a viable business and juggling competing priorities has also been a challenge. I have been completely absent from updates and such. My absence from this wiki, the forums, irc, etc, does not reflect on my passion for RepRap. I have recently finished my Printrbot jr. design in laser cut wood. It is quite small, but grew a bit to make it sturdy, practical and include a folding hinge to collapse it down enough to fit in a backpack and carry on a plane -which I do every time I fly. I have even used my printer on the plane at 36000 feet! Since the Jr has been well received, I am excited about considering the design final and converting this design to an absolute minimal plastic version that is even smaller. Both designs, the laser cut AND the RepRap jr. will be completely open source. The idea is to make the jr reprap version the smallest and cheapest to build. Minimalism and simplicity will be key. While I won't be able to scale this design to 12" x 12", I have broken the $200 cost barrier. barely. The Ubis hotend and Printrboard combo we designed is still the most efficient setup out there to my knowledge at 2.5-3.5 amps (peak) at 12 volts amounts to 30-42 Watts. Admittedly, that leaves very little room for a heated build platform.<br />
<br />
'''Printrbot RepRap jr'''<br />
<ul><li>Printrboard electronics</li><br />
<li>Ubis hotend </li><br />
<li>100x100x100 build volume</li><br />
<li>beams instead of rods</li><br />
<li>608 bearings instead of linear bearings</li><br />
<li>rack and pinion instead of belts (perhaps wishful thinking)</li><br />
</ul><br />
<br />
More to come.<br />
-Brook<br />
<br />
== Laser-cut Printrbots ==<br />
The original Printrbot design was created with plastic RP components in mind, but since the project's inception, the creators have moved on to a newer, laser-cut design, presumably optimized for mass manufacture.<br />
Three models now exist, all based upon the laser cut design: the Printrbot LC, the Printrbot Plus, and the Printrbot Jr.<br />
<br />
The Printrbot LC is essentially a re-imagining of the original Printrbot changed to fit the new LC paradigm.<br />
<br />
The Printrbot Plus is a larger version of the Printrbot capable of creating objects up to 8" cubed.<br />
<br />
The Printrbot Jr is a new, experimental version designed to only extrude PLA to make a cost-effective entry level 3D printer. Its build area is 4" cubed.<br />
<br />
== Bill of Materials ==<br />
<br />
Currently, I have a mechanically complete Printrbot and am working on lowering the part count and making the construction even simpler. The bot is being printed on a Makerbot Cupcake, so the parts are small and any machine can print them.<br />
<br />
'''TODO: More detailed BOM with STL for printed parts.''' <br />
<br />
The part count is rather low:<br />
<br />
*18x [http://www.thingiverse.com/thing:16990 Printed Parts] (not including the extruder)<br />
*3x Roller Bearings<br />
*11x Linear Bearings<br />
*1x 2" bolt<br />
*60x Nuts & Bolts<br />
*12x Smooth/Threaded Rods<br />
*4 Nema17 motors (Z axis uses 2)<br />
*PCB Heated print bed (5.5" x 5.5")<br />
<br />
Updates Planed: <br />
*We are seriously looking at going with a bowden extruder.... stay tuned...<br />
*Sanguinololu Electronics (Initially) and a new version of the [[Teensylu]] is planned including 100% surface mount parts and integrated stepper drivers. This will be an assembled board. (Board files at http://github.com/lwalkera/printrboard per http://printrbot.com/home/2012/1/1/the-end-the-beginning.html )<br />
*Hot End: Introducing the NEW "Ubis Hotend" - a super-efficient nichrome wire powered hotend. It can at 10 degrees celcius every 5 seconds. This will come assembled in the kit.<br />
<br />
Extruder (Wade's Accessible):<br />
*4x Printed Parts<br />
*3x roller bearings<br />
*1x Hobbed Bolt<br />
*1x very short threaded rod<br />
*a few washers, bolts and nuts to mount it<br />
*1x Nema17 motor<br />
<br />
Total part count (without motors, electronics, hot end): 101 ..... and shrinking.<br />
<br />
==Specifications==<br />
<br />
'''TODO'''<br />
<br />
* Printed Parts: ???<br />
* Non-Printed Parts: ???<br />
* Material Cost: ???<br />
* Cost: USD 400 - 950 (non assembled)<br />
* Printing Size: <br />
**Printrbot: 150x150x150 - 200x200x200mm (6"x6"x6" - 8"x8"x8")<br />
**Printrbot Jr: 100x100x100mm (4"x4"x4")<br />
* Precision: ??? (position), ??? (printing)<br />
<br />
== Further reading ==<br />
<br />
* [http://www.printrbottalk.com/ Printrbot Talk discussion forum]<br />
* [http://printrbot.dozuki.com/Guide/How-to-Assemble-The-Printrbot/1/1 How to Assemble The Printrbot]<br />
* [http://www.printrbot.com/ Printrbot Storefront]<br />
<br />
[[Category:Printrbot| ]]</div>
Pablog