https://reprap.org/mediawiki/api.php?action=feedcontributions&user=Mowi&feedformat=atomRepRap - User contributions [en]2024-03-29T01:02:16ZUser contributionsMediaWiki 1.30.0https://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=150396Mowi printer2015-06-29T10:37:39Z<p>Mowi: </p>
<hr />
<div>{{Languages|PortaPrusa}}<br />
<br />
{{RepRapNavigation|name=Mowi Printer}}<br />
<br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = Working<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = http://www.thingiverse.com/thing:218369<br />
}}<br />
<br />
[[File:Mowi Printer 3way.png|400px]]<br />
<br />
video on youtube: pdC9KxD-kWQ (sorry links are blocked)<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change.<br />
<br />
Current version Mowi v3 has a more sturdy Y-frame, the possibility to fixate the Y-frame to the Z-frame, a Graphic display, a smaller power supply, a wooden extruder , and a Z probe for auto bed leveling. It prints reliable with pla and abs. <br />
At the moment I am working on version 4, this version should be able to also print with pva and flexible filaments. I am looking into using mk8 hotends. These would also give the ability to swap the nozzle and they are cheaper and easier to source.<br />
<br />
At the moment there is no build manual yet. I hope there is enough information to get you started on building your own Mowi printer. In the Step Assembly on Github you can see how everything fits together. Let me know when you start building so we can work on the documentation together. You can post any issues on the github. All help in improving the design and/or the documentation is very very welcome. Also the pictures and video are still from the version 1. I will try to update them soon.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 5 essential + 9 optional<br />
*Lasercut parts: 29 essential + 6 optional<br />
*Bought Parts: ???<br />
*Filament Size: 1.75mm<br />
*Electronics: [[RAMPS 1.4]]<br />
*Firmware: [[Marlin]]<br />
<br />
==Main Open Issues==<br />
*Doesn't print with flexibele materials and pva yet. The filament buckles before the hotend.<br />
<br />
==Bill of Materials==<br />
<br />
Printed Parts, essential for printing:<br />
*extruder idler 2pcs<br />
*x carriage<br />
*x idler<br />
*x motor mount <br />
*y belt clamp<br />
<br />
Printed Parts, optional:<br />
*hinge left<br />
*hinge right<br />
*knob<br />
*fanduct<br />
*nutlocker straight<br />
*nutlocker corner 2 pieces<br />
*spoolholder<br />
*spoolholderp2p<br />
<br />
Lasercut Parts, essential for printing:<br />
*YBottomFront<br />
*YBottomMiddle<br />
*YBottomBack<br />
*YFront<br />
*YBack<br />
*YRightBack<br />
*YRightFront<br />
*YCross<br />
*YLeft<br />
*Yidler<br />
*bed<br />
*ZBottom<br />
*ZBack<br />
*ZSide 2pieces<br />
*ZFrontLeft<br />
*ZFrontRight<br />
*ZTop<br />
*ZBarHolderLeft<br />
*ZBarHolderRight<br />
*extrudermiddle<br />
*extruderstepperholder left<br />
*extruderstepperholder<br />
*hotendholder 2pieces<br />
*extruderadjuster<br />
*extruderlocker<br />
*Xendstop<br />
<br />
Lasercut Parts, optional:<br />
*hendel 2 pieces<br />
*display Bottom<br />
*display casing <br />
*display casing R <br />
*display wrap<br />
<br />
Lasercut Materials:<br />
*birch plywood, about 0,6m<math>^2</math> 5.8mm thick,<br />
*birch plywood, 145mm * 105 mm, 3mm thick<br />
*cardboard for electronics cover<br />
<br />
Bought Parts (I tried to use mostly (industry) standard parts so most parts can be bought at a lot of suppliers, the links are only an example)<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount_Full_Graphic_Smart_Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: Compact 12V 20A 240W Switching Power Supply, dimensions 165*100*40mm [http://www.ebay.com/itm/Compact-12V-20A-240W-Switching-Power-Supply-LED-Strip-Light-Driver-110V-220V-/181535667942?pt=LH_DefaultDomain_0&hash=item2a445e76e6 ebay psu] <br />
*Small Steppermotors: 3 pieces NEMA17 / 0.28Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Big Steppermotors:3 pieces NEMA17 / 0.4 Nm / 40mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pieces [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: 2 pieces module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pieces GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Hall Endstops: 2 pieces Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*inductive Endstop: Inductive Proximity Sensor,LJ8A3-2-Z/BX ,NPN,3-wire NO 8mm [http://www.aliexprexx.com/item/Inductive-Proximity-Sensor-LJ8A3-2-Z-BX-NPN-3-wire-NO-Proximity-Switch-M8/32237408492.html Aliexpress Sensor]<br />
*Lineair Bearings: 13 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://nl.farnell.com/marquardt/1801-1146/switch-off-1-contact/dp/1831105# Farnell on/off Rocker Switch]<br />
*Fan Extender [http://www.geeetech.com/wiki/index.php/Reprap_Ramps1.4_RRD_Fan_Extender# Reprap Ramps1.4 RRD Fan Extender]<br />
*Fans 40mm 2 pieces<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers, mostly m3<br />
*Glass 3mm 20x 26cm<br />
*Aluminium foil tape<br />
*[[Kapton Tape]] or 3M ScotchBlue 2090 Painter's Tape<br />
*Cable ties/Tie-wraps<br />
*Pneumatic tube ID 5mm length 30mm 2 pcs<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, unfortunately Aliexpress links are blocked on reprap.org due to spam)<br />
<br />
==Inspiration==<br />
The Design of the Mowi printer is based on the work of many other 3d printer designers, thanks a lot!!! Its inspired by [[Prusa i3]], [[Ultimaker]], [[FoldaRap]], [[Cartesio]], [http://3dbyflow.com/# by flow] and many many others.<br />
<br />
==Pictures==<br />
the pictures and video are still from the previous version. I will try to update them soon.<br />
<gallery perrow=3 widths=400px heights=300px><br />
File:Mowi_Printer_nr-013.JPG|Front<br />
File:Mowi_Printer_nr-000.JPG|Front Right view<br />
File:Mowi_Printer_nr-004.JPG|Back Right view<br />
File:Mowi_Printer_nr-009.JPG|Left view<br />
File:Mowi Printer nr-027.JPG|Closing<br />
File:Mowi Printer nr-036.JPG|Closed, Front<br />
File:Mowi Printer nr-038.JPG|Closed, Back<br />
File:Mowi_Printer_printing.JPG|Detail: Printing Dual colored "Open your Heart"<br />
File:Mowi_Printer_Power_and_USB.JPG|Detail: Power and USB connections<br />
File:Mowi_printer_display.JPG|Detail: Display<br />
File:Mowi_Printer_peek_inside.JPG|Detail: a peek inside reveals the Ramps and the powersupply<br />
</gallery></div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=149842Mowi printer2015-06-09T17:54:52Z<p>Mowi: Nema sizes switched</p>
<hr />
<div>{{Languages|PortaPrusa}}<br />
<br />
{{RepRapNavigation|name=Mowi Printer}}<br />
<br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = Working<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = http://www.thingiverse.com/thing:218369<br />
}}<br />
<br />
[[File:Mowi Printer 3way.png|400px]]<br />
<br />
video on youtube: pdC9KxD-kWQ (sorry links are blocked)<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change.<br />
<br />
Current version Mowi v3 has a more sturdy Y-frame, the possibility to fixate the Y-frame to the Z-frame, a Graphic display, a smaller power supply, a wooden extruder , and a Z probe for auto bed leveling. It prints reliable with pla and abs. <br />
At the moment I am working on version 4, this version should be able to also print with pva and flexible filaments. I am looking into using mk8 hotends. These would also give the ability to swap the nozzle and they are cheaper and easier to source.<br />
<br />
At the moment there is no build manual yet. I hope there is enough information to get you started on building your own Mowi printer. In the Step Assembly on Github you can see how everything fits together. Let me know when you start building so we can work on the documentation together. You can post any issues on the github. All help in improving the design and/or the documentation is very very welcome. Also the pictures and video are still from the version 1. I will try to update them soon.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 5 essential + 9 optional<br />
*Lasercut parts: 29 essential + 6 optional<br />
*Bought Parts: ???<br />
*Filament Size: 1.75mm<br />
*Electronics: [[RAMPS 1.4]]<br />
*Firmware: [[Marlin]]<br />
<br />
==Main Open Issues==<br />
*Doesn't print with flexibele materials and pva yet. The filament buckles before the hotend.<br />
<br />
==Bill of Materials==<br />
<br />
Printed Parts, essential for printing:<br />
*extruder idler 2pcs<br />
*x carriage<br />
*x idler<br />
*x motor mount <br />
*y belt clamp<br />
<br />
Printed Parts, optional:<br />
*hinge left<br />
*hinge right<br />
*knob<br />
*fanduct<br />
*nutlocker straight<br />
*nutlocker corner 2 pieces<br />
*spoolholder<br />
*spoolholderp2p<br />
<br />
Lasercut Parts, essential for printing:<br />
*YBottomFront<br />
*YBottomMiddle<br />
*YBottomBack<br />
*YFront<br />
*YBack<br />
*YRightBack<br />
*YRightFront<br />
*YCross<br />
*YLeft<br />
*Yidler<br />
*bed<br />
*ZBottom<br />
*ZBack<br />
*ZSide 2pieces<br />
*ZFrontLeft<br />
*ZFrontRight<br />
*ZTop<br />
*ZBarHolderLeft<br />
*ZBarHolderRight<br />
*extrudermiddle<br />
*extruderstepperholder left<br />
*extruderstepperholder<br />
*hotendholder 2pieces<br />
*extruderadjuster<br />
*extruderlocker<br />
*Xendstop<br />
<br />
Lasercut Parts, optional:<br />
*hendel 2 pieces<br />
*display Bottom<br />
*display casing <br />
*display casing R <br />
*display wrap<br />
<br />
Lasercut Materials:<br />
*birch plywood, about 0,6m<math>^2</math> 5.8mm thick,<br />
*birch plywood, 145mm * 105 mm, 3mm thick<br />
*cardboard for electronics cover<br />
<br />
Bought Parts (I tried to use mostly (industry) standard parts so most parts can be bought at a lot of suppliers, the links are only an example)<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount_Full_Graphic_Smart_Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: Compact 12V 20A 240W Switching Power Supply, dimensions 165*100*40mm [http://www.ebay.com/itm/Compact-12V-20A-240W-Switching-Power-Supply-LED-Strip-Light-Driver-110V-220V-/181535667942?pt=LH_DefaultDomain_0&hash=item2a445e76e6 ebay psu] <br />
*Small Steppermotors: 3 pieces NEMA17 / 0.28Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Big Steppermotors:3 pieces NEMA17 / 0.4 Nm / 40mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pieces [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: 2 pieces module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pieces GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Hall Endstops: 2 pieces Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*inductive Endstop: Inductive Proximity Sensor,LJ8A3-2-Z/BX ,NPN,3-wire NO 8mm [http://www.aliexprexx.com/item/Inductive-Proximity-Sensor-LJ8A3-2-Z-BX-NPN-3-wire-NO-Proximity-Switch-M8/32237408492.html Aliexpress Sensor]<br />
*Lineair Bearings: 13 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://uk.farnell.com/multicomp/mc36328-011-01/switch-spdt-4a-250vac-black/dp/9562265?Ntt=9562265# Farnell on/off Rocker Switch]<br />
*Fan Extender [http://www.geeetech.com/wiki/index.php/Reprap_Ramps1.4_RRD_Fan_Extender# Reprap Ramps1.4 RRD Fan Extender]<br />
*Fans 40mm 2 pieces<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers, mostly m3<br />
*Glass 3mm 20x 26cm<br />
*Aluminium foil tape<br />
*[[Kapton Tape]] or 3M ScotchBlue 2090 Painter's Tape<br />
*Cable ties/Tie-wraps<br />
*Pneumatic tube ID 5mm length 30mm 2 pcs<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, unfortunately Aliexpress links are blocked on reprap.org due to spam)<br />
<br />
==Inspiration==<br />
The Design of the Mowi printer is based on the work of many other 3d printer designers, thanks a lot!!! Its inspired by [[Prusa i3]], [[Ultimaker]], [[FoldaRap]], [[Cartesio]], [http://3dbyflow.com/# by flow] and many many others.<br />
<br />
==Pictures==<br />
the pictures and video are still from the previous version. I will try to update them soon.<br />
<gallery perrow=3 widths=400px heights=300px><br />
File:Mowi_Printer_nr-013.JPG|Front<br />
File:Mowi_Printer_nr-000.JPG|Front Right view<br />
File:Mowi_Printer_nr-004.JPG|Back Right view<br />
File:Mowi_Printer_nr-009.JPG|Left view<br />
File:Mowi Printer nr-027.JPG|Closing<br />
File:Mowi Printer nr-036.JPG|Closed, Front<br />
File:Mowi Printer nr-038.JPG|Closed, Back<br />
File:Mowi_Printer_printing.JPG|Detail: Printing Dual colored "Open your Heart"<br />
File:Mowi_Printer_Power_and_USB.JPG|Detail: Power and USB connections<br />
File:Mowi_printer_display.JPG|Detail: Display<br />
File:Mowi_Printer_peek_inside.JPG|Detail: a peek inside reveals the Ramps and the powersupply<br />
</gallery></div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=149811Mowi printer2015-06-05T16:50:30Z<p>Mowi: </p>
<hr />
<div>{{Languages|PortaPrusa}}<br />
<br />
{{RepRapNavigation|name=Mowi Printer}}<br />
<br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = Working<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = http://www.thingiverse.com/thing:218369<br />
}}<br />
<br />
[[File:Mowi Printer 3way.png|400px]]<br />
<br />
video on youtube: pdC9KxD-kWQ (sorry links are blocked)<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change.<br />
<br />
Current version Mowi v3 has a more sturdy Y-frame, the possibility to fixate the Y-frame to the Z-frame, a Graphic display, a smaller power supply, a wooden extruder , and a Z probe for auto bed leveling. It prints reliable with pla and abs. <br />
At the moment I am working on version 4, this version should be able to also print with pva and flexible filaments. I am looking into using mk8 hotends. These would also give the ability to swap the nozzle and they are cheaper and easier to source.<br />
<br />
At the moment there is no build manual yet. I hope there is enough information to get you started on building your own Mowi printer. In the Step Assembly on Github you can see how everything fits together. Let me know when you start building so we can work on the documentation together. You can post any issues on the github. All help in improving the design and/or the documentation is very very welcome. Also the pictures and video are still from the version 1. I will try to update them soon.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 5 essential + 9 optional<br />
*Lasercut parts: 29 essential + 6 optional<br />
*Bought Parts: ???<br />
*Filament Size: 1.75mm<br />
*Electronics: [[RAMPS 1.4]]<br />
*Firmware: [[Marlin]]<br />
<br />
==Main Open Issues==<br />
*Doesn't print with flexibele materials and pva yet. The filament buckles before the hotend.<br />
<br />
==Bill of Materials==<br />
<br />
Printed Parts, essential for printing:<br />
*extruder idler 2pcs<br />
*x carriage<br />
*x idler<br />
*x motor mount <br />
*y belt clamp<br />
<br />
Printed Parts, optional:<br />
*hinge left<br />
*hinge right<br />
*knob<br />
*fanduct<br />
*nutlocker straight<br />
*nutlocker corner 2 pieces<br />
*spoolholder<br />
*spoolholderp2p<br />
<br />
Lasercut Parts, essential for printing:<br />
*YBottomFront<br />
*YBottomMiddle<br />
*YBottomBack<br />
*YFront<br />
*YBack<br />
*YRightBack<br />
*YRightFront<br />
*YCross<br />
*YLeft<br />
*Yidler<br />
*bed<br />
*ZBottom<br />
*ZBack<br />
*ZSide 2pieces<br />
*ZFrontLeft<br />
*ZFrontRight<br />
*ZTop<br />
*ZBarHolderLeft<br />
*ZBarHolderRight<br />
*extrudermiddle<br />
*extruderstepperholder left<br />
*extruderstepperholder<br />
*hotendholder 2pieces<br />
*extruderadjuster<br />
*extruderlocker<br />
*Xendstop<br />
<br />
Lasercut Parts, optional:<br />
*hendel 2 pieces<br />
*display Bottom<br />
*display casing <br />
*display casing R <br />
*display wrap<br />
<br />
Lasercut Materials:<br />
*birch plywood, about 0,6m<math>^2</math> 5.8mm thick,<br />
*birch plywood, 145mm * 105 mm, 3mm thick<br />
*cardboard for electronics cover<br />
<br />
Bought Parts (I tried to use mostly (industry) standard parts so most parts can be bought at a lot of suppliers, the links are only an example)<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount_Full_Graphic_Smart_Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: Compact 12V 20A 240W Switching Power Supply, dimensions 165*100*40mm [http://www.ebay.com/itm/Compact-12V-20A-240W-Switching-Power-Supply-LED-Strip-Light-Driver-110V-220V-/181535667942?pt=LH_DefaultDomain_0&hash=item2a445e76e6 ebay psu] <br />
*Small Steppermotors: 3 pieces NEMA17 / 0.28Nm / 40mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Big Steppermotors:3 pieces NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pieces [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: 2 pieces module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pieces GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Hall Endstops: 2 pieces Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*inductive Endstop: Inductive Proximity Sensor,LJ8A3-2-Z/BX ,NPN,3-wire NO 8mm [http://www.aliexprexx.com/item/Inductive-Proximity-Sensor-LJ8A3-2-Z-BX-NPN-3-wire-NO-Proximity-Switch-M8/32237408492.html Aliexpress Sensor]<br />
*Lineair Bearings: 13 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://uk.farnell.com/multicomp/mc36328-011-01/switch-spdt-4a-250vac-black/dp/9562265?Ntt=9562265# Farnell on/off Rocker Switch]<br />
*Fan Extender [http://www.geeetech.com/wiki/index.php/Reprap_Ramps1.4_RRD_Fan_Extender# Reprap Ramps1.4 RRD Fan Extender]<br />
*Fans 40mm 2 pieces<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers, mostly m3<br />
*Glass 3mm 20x 26cm<br />
*Aluminium foil tape<br />
*[[Kapton Tape]] or 3M ScotchBlue 2090 Painter's Tape<br />
*Cable ties/Tie-wraps<br />
*Pneumatic tube ID 5mm length 30mm 2 pcs<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, unfortunately Aliexpress links are blocked on reprap.org due to spam)<br />
<br />
==Inspiration==<br />
The Design of the Mowi printer is based on the work of many other 3d printer designers, thanks a lot!!! Its inspired by [[Prusa i3]], [[Ultimaker]], [[FoldaRap]], [[Cartesio]], [http://3dbyflow.com/# by flow] and many many others.<br />
<br />
==Pictures==<br />
the pictures and video are still from the previous version. I will try to update them soon.<br />
<gallery perrow=3 widths=400px heights=300px><br />
File:Mowi_Printer_nr-013.JPG|Front<br />
File:Mowi_Printer_nr-000.JPG|Front Right view<br />
File:Mowi_Printer_nr-004.JPG|Back Right view<br />
File:Mowi_Printer_nr-009.JPG|Left view<br />
File:Mowi Printer nr-027.JPG|Closing<br />
File:Mowi Printer nr-036.JPG|Closed, Front<br />
File:Mowi Printer nr-038.JPG|Closed, Back<br />
File:Mowi_Printer_printing.JPG|Detail: Printing Dual colored "Open your Heart"<br />
File:Mowi_Printer_Power_and_USB.JPG|Detail: Power and USB connections<br />
File:Mowi_printer_display.JPG|Detail: Display<br />
File:Mowi_Printer_peek_inside.JPG|Detail: a peek inside reveals the Ramps and the powersupply<br />
</gallery></div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=149810Mowi printer2015-06-05T16:29:45Z<p>Mowi: </p>
<hr />
<div>{{Languages|PortaPrusa}}<br />
<br />
{{RepRapNavigation|name=Mowi Printer}}<br />
<br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = Working<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = http://www.thingiverse.com/thing:218369<br />
}}<br />
<br />
[[File:Mowi Printer 3way.png|400px]]<br />
<br />
video on youtube: pdC9KxD-kWQ (sorry links are blocked)<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change.<br />
<br />
Current version Mowi v3 has a more sturdy Y-frame, the possibility to fixate the Y-frame to the Z-frame, a Graphic display, a smaller power supply, a wooden extruder , and a Z probe for auto bed leveling. It prints reliable with pla and abs. <br />
At the moment I am working on version 4, this version should be able to also print with pva and flexible filaments. I am looking into using mk8 hotends. These would also give the ability to swap the nozzle and they are cheaper and easier to source.<br />
<br />
At the moment there is no build manual yet. I hope there is enough information to get you started on building your own Mowi printer. In the Step Assembly on Github you can see how everything fits together. Let me know when you start building so we can work on the documentation together. You can post any issues on the github. All help in improving the design and/or the documentation is very very welcome. Also the pictures and video are still from the version 1. I will try to update them soon.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 5 essential + 9 optional<br />
*Lasercut parts: 29 essential + 6 optional<br />
*Bought Parts: ???<br />
*Filament Size: 1.75mm<br />
*Electronics: [[RAMPS 1.4]]<br />
*Firmware: [[Marlin]]<br />
<br />
==Main Open Issues==<br />
*Doesn't print with flexibele materials and pva yet. The filament buckles before the hotend.<br />
<br />
==Bill of Materials==<br />
<br />
Printed Parts, essential for printing:<br />
*extruder idler 2pcs<br />
*x carriage<br />
*x idler<br />
*x motor mount <br />
*y belt clamp<br />
<br />
Printed Parts, optional:<br />
*hinge left<br />
*hinge right<br />
*knob<br />
*fanduct<br />
*nutlocker straight<br />
*nutlocker corner 2 pieces<br />
*spoolholder<br />
*spoolholderp2p<br />
<br />
Lasercut Parts, essential for printing:<br />
*YBottomFront<br />
*YBottomMiddle<br />
*YBottomBack<br />
*YFront<br />
*YBack<br />
*YRightBack<br />
*YRightFront<br />
*YCross<br />
*YLeft<br />
*Yidler<br />
*bed<br />
*ZBottom<br />
*ZBack<br />
*ZSide 2pieces<br />
*ZFrontLeft<br />
*ZFrontRight<br />
*ZTop<br />
*ZBarHolderLeft<br />
*ZBarHolderRight<br />
*extrudermiddle<br />
*extruderstepperholder left<br />
*extruderstepperholder<br />
*hotendholder 2pieces<br />
*extruderadjuster<br />
*extruderlocker<br />
*Xendstop<br />
<br />
Lasercut Parts, optional:<br />
*hendel 2 pieces<br />
*display Bottom<br />
*display casing <br />
*display casing R <br />
*display wrap<br />
<br />
Lasercut Materials:<br />
*birch plywood, about 0,6m<math>^2</math> 5.8mm thick,<br />
*birch plywood, 145mm * 105 mm, 3mm thick<br />
*cardboard for electronics cover<br />
<br />
Bought Parts (I tried to use mostly (industry) standard parts so most parts can be bought at a lot of suppliers, the links are only an example)<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount_Full_Graphic_Smart_Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: Compact 12V 20A 240W Switching Power Supply, dimensions 165*100*40mm [http://www.ebay.com/itm/Compact-12V-20A-240W-Switching-Power-Supply-LED-Strip-Light-Driver-110V-220V-/181535667942?pt=LH_DefaultDomain_0&hash=item2a445e76e6 ebay psu] <br />
*Small Steppermotors: 3 pieces NEMA17 / 0.28Nm / 40mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Big Steppermotors:3 pieces NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pieces [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: 2 pieces module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pieces GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Hall Endstops: 2 pieces Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*inductive Endstop: Inductive Proximity Sensor,LJ8A3-2-Z/BX ,NPN,3-wire NO 8mm [http://www.aliexprexx.com/item/Inductive-Proximity-Sensor-LJ8A3-2-Z-BX-NPN-3-wire-NO-Proximity-Switch-M8/32237408492.html Aliexpress Sensor]<br />
*Lineair Bearings: 13 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://uk.farnell.com/multicomp/mc36328-011-01/switch-spdt-4a-250vac-black/dp/9562265?Ntt=9562265# Farnell on/off Rocker Switch]<br />
*Fan Extender [http://www.geeetech.com/wiki/index.php/Reprap_Ramps1.4_RRD_Fan_Extender# Reprap Ramps1.4 RRD Fan Extender]<br />
*Fans 40mm 2 pieces<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers, mostly m3<br />
*Glass 3mm 20x 26cm<br />
*Aluminium foil tape<br />
*[[Kapton Tape]] or 3M ScotchBlue 2090 Painter's Tape<br />
*Cable ties/Tie-wraps<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, unfortunately Aliexpress links are blocked on reprap.org due to spam)<br />
<br />
==Inspiration==<br />
The Design of the Mowi printer is based on the work of many other 3d printer designers, thanks a lot!!! Its inspired by [[Prusa i3]], [[Ultimaker]], [[FoldaRap]], [[Cartesio]], [http://3dbyflow.com/# by flow] and many many others.<br />
<br />
==Pictures==<br />
the pictures and video are still from the previous version. I will try to update them soon.<br />
<gallery perrow=3 widths=400px heights=300px><br />
File:Mowi_Printer_nr-013.JPG|Front<br />
File:Mowi_Printer_nr-000.JPG|Front Right view<br />
File:Mowi_Printer_nr-004.JPG|Back Right view<br />
File:Mowi_Printer_nr-009.JPG|Left view<br />
File:Mowi Printer nr-027.JPG|Closing<br />
File:Mowi Printer nr-036.JPG|Closed, Front<br />
File:Mowi Printer nr-038.JPG|Closed, Back<br />
File:Mowi_Printer_printing.JPG|Detail: Printing Dual colored "Open your Heart"<br />
File:Mowi_Printer_Power_and_USB.JPG|Detail: Power and USB connections<br />
File:Mowi_printer_display.JPG|Detail: Display<br />
File:Mowi_Printer_peek_inside.JPG|Detail: a peek inside reveals the Ramps and the powersupply<br />
</gallery></div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=149809Mowi printer2015-06-05T16:21:22Z<p>Mowi: </p>
<hr />
<div>{{Languages|PortaPrusa}}<br />
<br />
{{RepRapNavigation|name=Mowi Printer}}<br />
<br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = Working<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = http://www.thingiverse.com/thing:218369<br />
}}<br />
<br />
[[File:Mowi Printer 3way.png|400px]]<br />
<br />
video on youtube: pdC9KxD-kWQ (sorry links are blocked)<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change.<br />
<br />
Current version Mowi v3 has a more sturdy Y-frame, the possibility to fixate the Y-frame to the Z-frame, a Graphic display, a smaller power supply, a wooden extruder , and a Z probe for auto bed leveling. It prints reliable with pla and abs. <br />
At the moment I am working on version 4, this version should be able to also print with pva and flexible filaments. I am looking into using mk8 hotends. These would also give the ability to swap the nozzle and they are cheaper and easier to source.<br />
<br />
At the moment there is no build manual yet. I hope there is enough information to get you started on building your own Mowi printer. In the Step Assembly on Github you can see how everything fits together. Let me know when you start building so we can work on the documentation together. You can post any issues on the github. All help in improving the design and/or the documentation is very very welcome. Also the pictures and video are still from the version 1. I will try to update them soon.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 5 essential + 9 optional<br />
*Lasercut parts: 29 essential + 6 optional<br />
*Bought Parts: ???<br />
*Filament Size: 1.75mm<br />
*Electronics: [[RAMPS 1.4]]<br />
*Firmware: [[Marlin]]<br />
<br />
==Main Open Issues==<br />
*Doesn't print with flexibele materials and pva yet. The filament buckles before the hotend.<br />
<br />
==Bill of Materials==<br />
<br />
Printed Parts, essential for printing:<br />
*extruder idler 2pcs<br />
*x carriage<br />
*x idler<br />
*x motor mount <br />
*y belt clamp<br />
<br />
Printed Parts, optional:<br />
*hinge left<br />
*hinge right<br />
*knob<br />
*fanduct<br />
*nutlocker straight<br />
*nutlocker corner 2 pieces<br />
*spoolholder<br />
*spoolholderp2p<br />
<br />
Lasercut Parts, essential for printing:<br />
*YBottomFront<br />
*YBottomMiddle<br />
*YBottomBack<br />
*YFront<br />
*YBack<br />
*YRightBack<br />
*YRightFront<br />
*YCross<br />
*YLeft<br />
*Yidler<br />
*bed<br />
*ZBottom<br />
*ZBack<br />
*ZSide 2pieces<br />
*ZFrontLeft<br />
*ZFrontRight<br />
*ZTop<br />
*ZBarHolderLeft<br />
*ZBarHolderRight<br />
*extrudermiddle<br />
*extruderstepperholder left<br />
*extruderstepperholder<br />
*hotendholder 2pieces<br />
*extruderadjuster<br />
*extruderlocker<br />
*Xendstop<br />
<br />
Lasercut Parts, optional:<br />
*hendel 2 pieces<br />
*display Bottom<br />
*display casing <br />
*display casing R <br />
*display wrap<br />
<br />
Lasercut Materials:<br />
*birch plywood, about 0,6m<math>^2</math> 5.8mm thick,<br />
*birch plywood, 145mm * 105 mm, 3mm thick<br />
*cardboard for electronics cover<br />
<br />
Bought Parts (I tried to use mostly (industry) standard parts so most parts can be bought at a lot of suppliers, the links are only an example)<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount_Full_Graphic_Smart_Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: Compact 12V 20A 240W Switching Power Supply, dimensions 165*100*40mm [http://www.ebay.com/itm/Compact-12V-20A-240W-Switching-Power-Supply-LED-Strip-Light-Driver-110V-220V-/181535667942?pt=LH_DefaultDomain_0&hash=item2a445e76e6 ebay psu] <br />
*Small Steppermotors: 3 pieces NEMA17 / 0.28Nm / 40mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Big Steppermotors:3 pieces NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pieces [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: 2 pieces module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pieces GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Hall Endstops: 2 pieces Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*inductive Endstop: Inductive Proximity Sensor,LJ8A3-2-Z/BX ,NPN,3-wire NO 8mm [http://www.aliexprexx.com/item/Inductive-Proximity-Sensor-LJ8A3-2-Z-BX-NPN-3-wire-NO-Proximity-Switch-M8/32237408492.html Aliexpress Sensor]<br />
*Lineair Bearings: 13 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://uk.farnell.com/multicomp/mc36328-011-01/switch-spdt-4a-250vac-black/dp/9562265?Ntt=9562265# Farnell on/off Rocker Switch]<br />
*Ramps Fan Extender [http://www.reprapdiscount.com/electronics/25-reprap-ramps-14-fan-extender.html# RRD expansion board]<br />
*Fans 40mm 2 pieces<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers, mostly m3<br />
*Glass 3mm 20x 26cm<br />
*Aluminium foil tape<br />
*[[Kapton Tape]] or 3M ScotchBlue 2090 Painter's Tape<br />
*Cable ties/Tie-wraps<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, unfortunately Aliexpress links are blocked on reprap.org due to spam)<br />
<br />
==Inspiration==<br />
The Design of the Mowi printer is based on the work of many other 3d printer designers, thanks a lot!!! Its inspired by [[Prusa i3]], [[Ultimaker]], [[FoldaRap]], [[Cartesio]], [http://3dbyflow.com/# by flow] and many many others.<br />
<br />
==Pictures==<br />
the pictures and video are still from the previous version. I will try to update them soon.<br />
<gallery perrow=3 widths=400px heights=300px><br />
File:Mowi_Printer_nr-013.JPG|Front<br />
File:Mowi_Printer_nr-000.JPG|Front Right view<br />
File:Mowi_Printer_nr-004.JPG|Back Right view<br />
File:Mowi_Printer_nr-009.JPG|Left view<br />
File:Mowi Printer nr-027.JPG|Closing<br />
File:Mowi Printer nr-036.JPG|Closed, Front<br />
File:Mowi Printer nr-038.JPG|Closed, Back<br />
File:Mowi_Printer_printing.JPG|Detail: Printing Dual colored "Open your Heart"<br />
File:Mowi_Printer_Power_and_USB.JPG|Detail: Power and USB connections<br />
File:Mowi_printer_display.JPG|Detail: Display<br />
File:Mowi_Printer_peek_inside.JPG|Detail: a peek inside reveals the Ramps and the powersupply<br />
</gallery></div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=149808Mowi printer2015-06-05T16:18:07Z<p>Mowi: updated status, small additions to BOM</p>
<hr />
<div><br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = http://www.thingiverse.com/thing:218369<br />
}}<br />
<br />
[[File:Mowi Printer 3way.png|400px]]<br />
<br />
video on youtube: pdC9KxD-kWQ (sorry links are blocked)<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change.<br />
<br />
Current version Mowi v3 has a more sturdy Y-frame, the possibility to fixate the Y-frame to the Z-frame, a Graphic display, a smaller power supply, a wooden extruder , and a Z probe for auto bed leveling. It prints reliable with pla and abs. <br />
At the moment I am working on version 4, this version should be able to also print with pva and flexible filaments. I am looking into using mk8 hotends. These would also give the ability to swap the nozzle and they are cheaper and easier to source.<br />
<br />
At the moment there is no build manual yet. I hope there is enough information to get you started on building your own Mowi printer. In the Step Assembly on Github you can see how everything fits together. Let me know when you start building so we can work on the documentation together. You can post any issues on the github. All help in improving the design and/or the documentation is very very welcome. Also the pictures and video are still from the version 1. I will try to update them soon.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 5 essential + 9 optional<br />
*Lasercut parts: 29 essential + 6 optional<br />
*Bought Parts: ???<br />
*Filament Size: 1.75mm<br />
*Electronics: [[RAMPS 1.4]]<br />
*Firmware: [[Marlin]]<br />
<br />
==Main Open Issues==<br />
*Doesn't print with flexibele materials and pva yet. The filament buckles before the hotend.<br />
<br />
==Bill of Materials==<br />
<br />
Printed Parts, essential for printing:<br />
*extruder idler 2pcs<br />
*x carriage<br />
*x idler<br />
*x motor mount <br />
*y belt clamp<br />
<br />
Printed Parts, optional:<br />
*hinge left<br />
*hinge right<br />
*knob<br />
*fanduct<br />
*nutlocker straight<br />
*nutlocker corner 2 pieces<br />
*spoolholder<br />
*spoolholderp2p<br />
<br />
Lasercut Parts, essential for printing:<br />
*YBottomFront<br />
*YBottomMiddle<br />
*YBottomBack<br />
*YFront<br />
*YBack<br />
*YRightBack<br />
*YRightFront<br />
*YCross<br />
*YLeft<br />
*Yidler<br />
*bed<br />
*ZBottom<br />
*ZBack<br />
*ZSide 2pieces<br />
*ZFrontLeft<br />
*ZFrontRight<br />
*ZTop<br />
*ZBarHolderLeft<br />
*ZBarHolderRight<br />
*extrudermiddle<br />
*extruderstepperholder left<br />
*extruderstepperholder<br />
*hotendholder 2pieces<br />
*extruderadjuster<br />
*extruderlocker<br />
*Xendstop<br />
<br />
Lasercut Parts, optional:<br />
*hendel 2 pieces<br />
*display Bottom<br />
*display casing <br />
*display casing R <br />
*display wrap<br />
<br />
Lasercut Materials:<br />
*birch plywood, about 0,6m<math>^2</math> 5.8mm thick,<br />
*birch plywood, 145mm * 105 mm, 3mm thick<br />
*cardboard for electronics cover<br />
<br />
Bought Parts (I tried to use mostly (industry) standard parts so most parts can be bought at a lot of suppliers, the links are only an example)<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount_Full_Graphic_Smart_Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: Compact 12V 20A 240W Switching Power Supply, dimensions 165*100*40mm [http://www.ebay.com/itm/Compact-12V-20A-240W-Switching-Power-Supply-LED-Strip-Light-Driver-110V-220V-/181535667942?pt=LH_DefaultDomain_0&hash=item2a445e76e6 ebay psu] <br />
*Small Steppermotors: 3 pieces NEMA17 / 0.28Nm / 40mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Big Steppermotors:3 pieces NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pieces [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: 2 pieces module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pieces GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Hall Endstops: 2 pieces Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*inductive Endstop: Inductive Proximity Sensor,LJ8A3-2-Z/BX ,NPN,3-wire NO 8mm [http://www.aliexprexx.com/item/Inductive-Proximity-Sensor-LJ8A3-2-Z-BX-NPN-3-wire-NO-Proximity-Switch-M8/32237408492.html Aliexpress Sensor]<br />
*Lineair Bearings: 13 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://uk.farnell.com/multicomp/mc36328-011-01/switch-spdt-4a-250vac-black/dp/9562265?Ntt=9562265# Farnell on/off Rocker Switch]<br />
*Ramps Fan Extender [http://www.reprapdiscount.com/electronics/25-reprap-ramps-14-fan-extender.html# RRD expansion board]<br />
*Fans 40mm 2 pieces<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers, mostly m3<br />
*Glass 3mm 20x 26cm<br />
*Aluminium foil tape<br />
*[[Kapton Tape]] or 3M ScotchBlue 2090 Painter's Tape<br />
*Cable ties/Tie-wraps<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, unfortunately Aliexpress links are blocked on reprap.org due to spam)<br />
<br />
==Inspiration==<br />
The Design of the Mowi printer is based on the work of many other 3d printer designers, thanks a lot!!! Its inspired by [[Prusa i3]], [[Ultimaker]], [[FoldaRap]], [[Cartesio]], [http://3dbyflow.com/# by flow] and many many others.<br />
<br />
==Pictures==<br />
the pictures and video are still from the previous version. I will try to update them soon.<br />
<gallery perrow=3 widths=400px heights=300px><br />
File:Mowi_Printer_nr-013.JPG|Front<br />
File:Mowi_Printer_nr-000.JPG|Front Right view<br />
File:Mowi_Printer_nr-004.JPG|Back Right view<br />
File:Mowi_Printer_nr-009.JPG|Left view<br />
File:Mowi Printer nr-027.JPG|Closing<br />
File:Mowi Printer nr-036.JPG|Closed, Front<br />
File:Mowi Printer nr-038.JPG|Closed, Back<br />
File:Mowi_Printer_printing.JPG|Detail: Printing Dual colored "Open your Heart"<br />
File:Mowi_Printer_Power_and_USB.JPG|Detail: Power and USB connections<br />
File:Mowi_printer_display.JPG|Detail: Display<br />
File:Mowi_Printer_peek_inside.JPG|Detail: a peek inside reveals the Ramps and the powersupply<br />
</gallery></div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=148234Mowi printer2015-05-04T17:50:28Z<p>Mowi: /* Bill of Materials */</p>
<hr />
<div><br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = http://www.thingiverse.com/thing:218369<br />
}}<br />
<br />
[[File:Mowi Printer 3way.png|400px]]<br />
<br />
video on youtube: pdC9KxD-kWQ (sorry links are blocked)<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change.<br />
<br />
current version Mowi v3 has a more sturdy Y-frame, the possibility to fixate the Y-frame to the Z-frame, a Graphic display, a smaller power supply, a wooden extruder , and a Z probe for auto bed leveling. <br />
<br />
At the moment there is no build manual yet. I hope there is enough information to get you started on building your own Mowi printer. In the Step Assembly on Github you can see how everything fits together. Let me know when you start building so we can work on the documentation together. You can post any issues on the github. All help in improving the design and/or the documentation is very very welcome. Also the pictures and video are still from the version 1. I will try to update them soon.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 5 essential + 9 optional<br />
*Lasercut parts: 29 essential + 6 optional<br />
*Bought Parts: ???<br />
*Filament Size: 1.75mm<br />
*Electronics: [[RAMPS 1.4]]<br />
*Firmware: [[Marlin]]<br />
<br />
==Main Open Issues==<br />
*electronics cover needed<br />
I just did a mayor redesign that should have fixed all open issues. I will assemble it in the coming week and hopefully I will not run into any new issues.<br />
<br />
==Bill of Materials==<br />
<br />
Printed Parts, essential for printing:<br />
*extruder idler 2pcs<br />
*x carriage<br />
*x idler<br />
*x motor mount <br />
*y belt clamp<br />
<br />
Printed Parts, optional:<br />
*hinge left<br />
*hinge right<br />
*knob<br />
*fanduct<br />
*nutlocker straight<br />
*nutlocker corner 2 pieces<br />
*spoolholder<br />
*spoolholderp2p<br />
<br />
Lasercut Parts, essential for printing:<br />
*YBottomFront<br />
*YBottomMiddle<br />
*YBottomBack<br />
*YFront<br />
*YBack<br />
*YRightBack<br />
*YRightFront<br />
*YCross<br />
*YLeft<br />
*Yidler<br />
*bed<br />
*ZBottom<br />
*ZBack<br />
*ZSide 2pieces<br />
*ZFrontLeft<br />
*ZFrontRight<br />
*ZTop<br />
*ZBarHolderLeft<br />
*ZBarHolderRight<br />
*extrudermiddle<br />
*extruderstepperholder left<br />
*extruderstepperholder<br />
*hotendholder 2pieces<br />
*extruderadjuster<br />
*extruderlocker<br />
*Xendstop<br />
<br />
Lasercut Parts, optional:<br />
*hendel 2 pieces<br />
*display Bottom<br />
*display casing <br />
*display casing R <br />
*display wrap<br />
<br />
Lasercut Materials:<br />
*birch plywood, about 0,6m<math>^2</math> 5.8mm thick,<br />
*birch plywood, 145mm * 105 mm, 3mm thick<br />
*cardboard for electronics cover<br />
<br />
Bought Parts (I tried to use mostly (industry) standard parts so most parts can be bought at a lot of suppliers, the links are only an example)<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount_Full_Graphic_Smart_Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: Compact 12V 20A 240W Switching Power Supply, dimensions 165*100*40mm [http://www.ebay.com/itm/Compact-12V-20A-240W-Switching-Power-Supply-LED-Strip-Light-Driver-110V-220V-/181535667942?pt=LH_DefaultDomain_0&hash=item2a445e76e6 ebay psu] <br />
*Small Steppermotors: 3 pieces NEMA17 / 0.28Nm / 40mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Big Steppermotors:3 pieces NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pieces [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: 2 pieces module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pieces GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Hall Endstops: 2 pieces Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*inductive Endstop: Inductive Proximity Sensor,LJ8A3-2-Z/BX ,NPN,3-wire NO 8mm [http://www.aliexprexx.com/item/Inductive-Proximity-Sensor-LJ8A3-2-Z-BX-NPN-3-wire-NO-Proximity-Switch-M8/32237408492.html Aliexpress Sensor]<br />
*Lineair Bearings: 13 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://uk.farnell.com/multicomp/mc36328-011-01/switch-spdt-4a-250vac-black/dp/9562265?Ntt=9562265# Farnell on/off Rocker Switch]<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers, mostly m3<br />
*Glass 3mm 20x 26cm<br />
*Aluminium foil tape<br />
*[[Kapton Tape]] or 3M ScotchBlue 2090 Painter's Tape<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, unfortunately Aliexpress links are blocked on reprap.org due to spam)<br />
<br />
==Inspiration==<br />
The Design of the Mowi printer is based on the work of many other 3d printer designers, thanks a lot!!! Its inspired by [[Prusa i3]], [[Ultimaker]], [[FoldaRap]], [[Cartesio]], [http://3dbyflow.com/# by flow] and many many others.<br />
<br />
==Pictures==<br />
the pictures and video are still from the previous version. I will try to update them soon.<br />
<gallery perrow=3 widths=400px heights=300px><br />
File:Mowi_Printer_nr-013.JPG|Front<br />
File:Mowi_Printer_nr-000.JPG|Front Right view<br />
File:Mowi_Printer_nr-004.JPG|Back Right view<br />
File:Mowi_Printer_nr-009.JPG|Left view<br />
File:Mowi Printer nr-027.JPG|Closing<br />
File:Mowi Printer nr-036.JPG|Closed, Front<br />
File:Mowi Printer nr-038.JPG|Closed, Back<br />
File:Mowi_Printer_printing.JPG|Detail: Printing Dual colored "Open your Heart"<br />
File:Mowi_Printer_Power_and_USB.JPG|Detail: Power and USB connections<br />
File:Mowi_printer_display.JPG|Detail: Display<br />
File:Mowi_Printer_peek_inside.JPG|Detail: a peek inside reveals the Ramps and the powersupply<br />
</gallery></div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=148233Mowi printer2015-05-04T17:48:37Z<p>Mowi: /* Bill of Materials */ added x carriage</p>
<hr />
<div><br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = http://www.thingiverse.com/thing:218369<br />
}}<br />
<br />
[[File:Mowi Printer 3way.png|400px]]<br />
<br />
video on youtube: pdC9KxD-kWQ (sorry links are blocked)<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change.<br />
<br />
current version Mowi v3 has a more sturdy Y-frame, the possibility to fixate the Y-frame to the Z-frame, a Graphic display, a smaller power supply, a wooden extruder , and a Z probe for auto bed leveling. <br />
<br />
At the moment there is no build manual yet. I hope there is enough information to get you started on building your own Mowi printer. In the Step Assembly on Github you can see how everything fits together. Let me know when you start building so we can work on the documentation together. You can post any issues on the github. All help in improving the design and/or the documentation is very very welcome. Also the pictures and video are still from the version 1. I will try to update them soon.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 5 essential + 9 optional<br />
*Lasercut parts: 29 essential + 6 optional<br />
*Bought Parts: ???<br />
*Filament Size: 1.75mm<br />
*Electronics: [[RAMPS 1.4]]<br />
*Firmware: [[Marlin]]<br />
<br />
==Main Open Issues==<br />
*electronics cover needed<br />
I just did a mayor redesign that should have fixed all open issues. I will assemble it in the coming week and hopefully I will not run into any new issues.<br />
<br />
==Bill of Materials==<br />
<br />
Printed Parts, essential for printing:<br />
*extruder idler 2pcs<br />
*x carriage<br />
*x idler<br />
*x motor mount <br />
*y belt clamp<br />
<br />
Printed Parts, optional:<br />
*hinge left<br />
*hinge right<br />
*knob<br />
*fanduct<br />
*nutlocker straight<br />
*nutlocker corner 2 pieces<br />
*spoolholder<br />
*spoolholderp2p<br />
<br />
Lasercut Parts, essential for printing:<br />
*YBottomFront<br />
*YBottomMiddle<br />
*YBottomBack<br />
*YFront<br />
*YBack<br />
*YRightBack<br />
*YRightFront<br />
*YCross<br />
*YLeft<br />
*Yidler<br />
*bed<br />
*ZBottom<br />
*ZBack<br />
*ZSide 2pieces<br />
*ZFrontLeft<br />
*ZFrontRight<br />
*ZTop<br />
*ZBarHolderLeft<br />
*ZBarHolderRight<br />
*extrudermiddle<br />
*extruderstepperholder left<br />
*extruderstepperholder<br />
*hotendholder<br />
*extruderadjuster<br />
*extruderlocker<br />
*Xendstop<br />
<br />
Lasercut Parts, optional:<br />
*hendel 2 pieces<br />
*display Bottom<br />
*display casing <br />
*display casing R <br />
*display wrap<br />
<br />
Lasercut Materials:<br />
*birch plywood, about 0,6m<math>^2</math> 5.8mm thick,<br />
*birch plywood, 145mm * 105 mm, 3mm thick<br />
*cardboard for electronics cover<br />
<br />
Bought Parts (I tried to use mostly (industry) standard parts so most parts can be bought at a lot of suppliers, the links are only an example)<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount_Full_Graphic_Smart_Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: Compact 12V 20A 240W Switching Power Supply, dimensions 165*100*40mm [http://www.ebay.com/itm/Compact-12V-20A-240W-Switching-Power-Supply-LED-Strip-Light-Driver-110V-220V-/181535667942?pt=LH_DefaultDomain_0&hash=item2a445e76e6 ebay psu] <br />
*Small Steppermotors: 3 pieces NEMA17 / 0.28Nm / 40mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Big Steppermotors:3 pieces NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pieces [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: 2 pieces module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pieces GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Hall Endstops: 2 pieces Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*inductive Endstop: Inductive Proximity Sensor,LJ8A3-2-Z/BX ,NPN,3-wire NO 8mm [http://www.aliexprexx.com/item/Inductive-Proximity-Sensor-LJ8A3-2-Z-BX-NPN-3-wire-NO-Proximity-Switch-M8/32237408492.html Aliexpress Sensor]<br />
*Lineair Bearings: 13 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://uk.farnell.com/multicomp/mc36328-011-01/switch-spdt-4a-250vac-black/dp/9562265?Ntt=9562265# Farnell on/off Rocker Switch]<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers, mostly m3<br />
*Glass 3mm 20x 26cm<br />
*Aluminium foil tape<br />
*[[Kapton Tape]] or 3M ScotchBlue 2090 Painter's Tape<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, unfortunately Aliexpress links are blocked on reprap.org due to spam)<br />
<br />
==Inspiration==<br />
The Design of the Mowi printer is based on the work of many other 3d printer designers, thanks a lot!!! Its inspired by [[Prusa i3]], [[Ultimaker]], [[FoldaRap]], [[Cartesio]], [http://3dbyflow.com/# by flow] and many many others.<br />
<br />
==Pictures==<br />
the pictures and video are still from the previous version. I will try to update them soon.<br />
<gallery perrow=3 widths=400px heights=300px><br />
File:Mowi_Printer_nr-013.JPG|Front<br />
File:Mowi_Printer_nr-000.JPG|Front Right view<br />
File:Mowi_Printer_nr-004.JPG|Back Right view<br />
File:Mowi_Printer_nr-009.JPG|Left view<br />
File:Mowi Printer nr-027.JPG|Closing<br />
File:Mowi Printer nr-036.JPG|Closed, Front<br />
File:Mowi Printer nr-038.JPG|Closed, Back<br />
File:Mowi_Printer_printing.JPG|Detail: Printing Dual colored "Open your Heart"<br />
File:Mowi_Printer_Power_and_USB.JPG|Detail: Power and USB connections<br />
File:Mowi_printer_display.JPG|Detail: Display<br />
File:Mowi_Printer_peek_inside.JPG|Detail: a peek inside reveals the Ramps and the powersupply<br />
</gallery></div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=146737Mowi printer2015-04-06T12:58:50Z<p>Mowi: /* Introduction */</p>
<hr />
<div><br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = http://www.thingiverse.com/thing:218369<br />
}}<br />
<br />
[[File:Mowi Printer 3way.png|400px]]<br />
<br />
video on youtube: pdC9KxD-kWQ (sorry links are blocked)<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change.<br />
<br />
current version Mowi v3 has a more sturdy Y-frame, the possibility to fixate the Y-frame to the Z-frame, a Graphic display, a smaller power supply, a wooden extruder , and a Z probe for auto bed leveling. <br />
<br />
At the moment there is no build manual yet. I hope there is enough information to get you started on building your own Mowi printer. In the Step Assembly on Github you can see how everything fits together. Let me know when you start building so we can work on the documentation together. You can post any issues on the github. All help in improving the design and/or the documentation is very very welcome. Also the pictures and video are still from the version 1. I will try to update them soon.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 5 essential + 9 optional<br />
*Lasercut parts: 29 essential + 6 optional<br />
*Bought Parts: ???<br />
*Filament Size: 1.75mm<br />
*Electronics: [[RAMPS 1.4]]<br />
*Firmware: [[Marlin]]<br />
<br />
==Main Open Issues==<br />
*electronics cover needed<br />
I just did a mayor redesign that should have fixed all open issues. I will assemble it in the coming week and hopefully I will not run into any new issues.<br />
<br />
==Bill of Materials==<br />
<br />
Printed Parts, essential for printing:<br />
*extruder idler 2pcs<br />
*x idler<br />
*x motor mount <br />
*y belt clamp<br />
<br />
Printed Parts, optional:<br />
*hinge left<br />
*hinge right<br />
*knob<br />
*fanduct<br />
*nutlocker straight<br />
*nutlocker corner 2 pieces<br />
*spoolholder<br />
*spoolholderp2p<br />
<br />
Lasercut Parts, essential for printing:<br />
*YBottomFront<br />
*YBottomMiddle<br />
*YBottomBack<br />
*YFront<br />
*YBack<br />
*YRightBack<br />
*YRightFront<br />
*YCross<br />
*YLeft<br />
*Yidler<br />
*bed<br />
*ZBottom<br />
*ZBack<br />
*ZSide 2pieces<br />
*ZFrontLeft<br />
*ZFrontRight<br />
*ZTop<br />
*ZBarHolderLeft<br />
*ZBarHolderRight<br />
*extrudermiddle<br />
*extruderstepperholder left<br />
*extruderstepperholder<br />
*hotendholder<br />
*extruderadjuster<br />
*extruderlocker<br />
*Xendstop<br />
<br />
Lasercut Parts, optional:<br />
*hendel 2 pieces<br />
*display Bottom<br />
*display casing <br />
*display casing R <br />
*display wrap<br />
<br />
Lasercut Materials:<br />
*birch plywood, about 0,6m<math>^2</math> 5.8mm thick,<br />
*birch plywood, 145mm * 105 mm, 3mm thick<br />
*cardboard for electronics cover<br />
<br />
Bought Parts (I tried to use mostly (industry) standard parts so most parts can be bought at a lot of suppliers, the links are only an example)<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount_Full_Graphic_Smart_Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: Compact 12V 20A 240W Switching Power Supply, dimensions 165*100*40mm [http://www.ebay.com/itm/Compact-12V-20A-240W-Switching-Power-Supply-LED-Strip-Light-Driver-110V-220V-/181535667942?pt=LH_DefaultDomain_0&hash=item2a445e76e6 ebay psu] <br />
*Small Steppermotors: 3 pieces NEMA17 / 0.28Nm / 40mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Big Steppermotors:3 pieces NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pieces [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: 2 pieces module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pieces GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Hall Endstops: 2 pieces Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*inductive Endstop: Inductive Proximity Sensor,LJ8A3-2-Z/BX ,NPN,3-wire NO 8mm [http://www.aliexprexx.com/item/Inductive-Proximity-Sensor-LJ8A3-2-Z-BX-NPN-3-wire-NO-Proximity-Switch-M8/32237408492.html Aliexpress Sensor]<br />
*Lineair Bearings: 13 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://uk.farnell.com/multicomp/mc36328-011-01/switch-spdt-4a-250vac-black/dp/9562265?Ntt=9562265# Farnell on/off Rocker Switch]<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers, mostly m3<br />
*Glass 3mm 20x 26cm<br />
*Aluminium foil tape<br />
*[[Kapton Tape]] or 3M ScotchBlue 2090 Painter's Tape<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, unfortunately Aliexpress links are blocked on reprap.org due to spam)<br />
<br />
<br />
==Inspiration==<br />
The Design of the Mowi printer is based on the work of many other 3d printer designers, thanks a lot!!! Its inspired by [[Prusa i3]], [[Ultimaker]], [[FoldaRap]], [[Cartesio]], [http://3dbyflow.com/# by flow] and many many others.<br />
<br />
==Pictures==<br />
the pictures and video are still from the previous version. I will try to update them soon.<br />
<gallery perrow=3 widths=400px heights=300px><br />
File:Mowi_Printer_nr-013.JPG|Front<br />
File:Mowi_Printer_nr-000.JPG|Front Right view<br />
File:Mowi_Printer_nr-004.JPG|Back Right view<br />
File:Mowi_Printer_nr-009.JPG|Left view<br />
File:Mowi Printer nr-027.JPG|Closing<br />
File:Mowi Printer nr-036.JPG|Closed, Front<br />
File:Mowi Printer nr-038.JPG|Closed, Back<br />
File:Mowi_Printer_printing.JPG|Detail: Printing Dual colored "Open your Heart"<br />
File:Mowi_Printer_Power_and_USB.JPG|Detail: Power and USB connections<br />
File:Mowi_printer_display.JPG|Detail: Display<br />
File:Mowi_Printer_peek_inside.JPG|Detail: a peek inside reveals the Ramps and the powersupply<br />
</gallery></div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=146736Mowi printer2015-04-06T12:42:57Z<p>Mowi: /* Pictures */</p>
<hr />
<div><br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = http://www.thingiverse.com/thing:218369<br />
}}<br />
<br />
[[File:Mowi Printer 3way.png|400px]]<br />
<br />
video on youtube: pdC9KxD-kWQ (sorry links are blocked)<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change.<br />
<br />
At the moment there is no build manual yet. I hope there is enough information to get you started on building your own Mowi printer. In the Step Assembly on Github you can see how everything fits together. Let me know when you start building so we can work on the documentation together. You can post any issues on the github. All help in improving the design and/or the documentation is very very welcome. Also the pictures and video are still from the previous version. I will try to update them soon.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 5 essential + 9 optional<br />
*Lasercut parts: 29 essential + 6 optional<br />
*Bought Parts: ???<br />
*Filament Size: 1.75mm<br />
*Electronics: [[RAMPS 1.4]]<br />
*Firmware: [[Marlin]]<br />
<br />
==Main Open Issues==<br />
*electronics cover needed<br />
I just did a mayor redesign that should have fixed all open issues. I will assemble it in the coming week and hopefully I will not run into any new issues.<br />
<br />
==Bill of Materials==<br />
<br />
Printed Parts, essential for printing:<br />
*extruder idler 2pcs<br />
*x idler<br />
*x motor mount <br />
*y belt clamp<br />
<br />
Printed Parts, optional:<br />
*hinge left<br />
*hinge right<br />
*knob<br />
*fanduct<br />
*nutlocker straight<br />
*nutlocker corner 2 pieces<br />
*spoolholder<br />
*spoolholderp2p<br />
<br />
Lasercut Parts, essential for printing:<br />
*YBottomFront<br />
*YBottomMiddle<br />
*YBottomBack<br />
*YFront<br />
*YBack<br />
*YRightBack<br />
*YRightFront<br />
*YCross<br />
*YLeft<br />
*Yidler<br />
*bed<br />
*ZBottom<br />
*ZBack<br />
*ZSide 2pieces<br />
*ZFrontLeft<br />
*ZFrontRight<br />
*ZTop<br />
*ZBarHolderLeft<br />
*ZBarHolderRight<br />
*extrudermiddle<br />
*extruderstepperholder left<br />
*extruderstepperholder<br />
*hotendholder<br />
*extruderadjuster<br />
*extruderlocker<br />
*Xendstop<br />
<br />
Lasercut Parts, optional:<br />
*hendel 2 pieces<br />
*display Bottom<br />
*display casing <br />
*display casing R <br />
*display wrap<br />
<br />
Lasercut Materials:<br />
*birch plywood, about 0,6m<math>^2</math> 5.8mm thick,<br />
*birch plywood, 145mm * 105 mm, 3mm thick<br />
*cardboard for electronics cover<br />
<br />
Bought Parts (I tried to use mostly (industry) standard parts so most parts can be bought at a lot of suppliers, the links are only an example)<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount_Full_Graphic_Smart_Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: Compact 12V 20A 240W Switching Power Supply, dimensions 165*100*40mm [http://www.ebay.com/itm/Compact-12V-20A-240W-Switching-Power-Supply-LED-Strip-Light-Driver-110V-220V-/181535667942?pt=LH_DefaultDomain_0&hash=item2a445e76e6 ebay psu] <br />
*Small Steppermotors: 3 pieces NEMA17 / 0.28Nm / 40mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Big Steppermotors:3 pieces NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pieces [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: 2 pieces module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pieces GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Hall Endstops: 2 pieces Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*inductive Endstop: Inductive Proximity Sensor,LJ8A3-2-Z/BX ,NPN,3-wire NO 8mm [http://www.aliexprexx.com/item/Inductive-Proximity-Sensor-LJ8A3-2-Z-BX-NPN-3-wire-NO-Proximity-Switch-M8/32237408492.html Aliexpress Sensor]<br />
*Lineair Bearings: 13 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://uk.farnell.com/multicomp/mc36328-011-01/switch-spdt-4a-250vac-black/dp/9562265?Ntt=9562265# Farnell on/off Rocker Switch]<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers, mostly m3<br />
*Glass 3mm 20x 26cm<br />
*Aluminium foil tape<br />
*[[Kapton Tape]] or 3M ScotchBlue 2090 Painter's Tape<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, unfortunately Aliexpress links are blocked on reprap.org due to spam)<br />
<br />
<br />
==Inspiration==<br />
The Design of the Mowi printer is based on the work of many other 3d printer designers, thanks a lot!!! Its inspired by [[Prusa i3]], [[Ultimaker]], [[FoldaRap]], [[Cartesio]], [http://3dbyflow.com/# by flow] and many many others.<br />
<br />
==Pictures==<br />
the pictures and video are still from the previous version. I will try to update them soon.<br />
<gallery perrow=3 widths=400px heights=300px><br />
File:Mowi_Printer_nr-013.JPG|Front<br />
File:Mowi_Printer_nr-000.JPG|Front Right view<br />
File:Mowi_Printer_nr-004.JPG|Back Right view<br />
File:Mowi_Printer_nr-009.JPG|Left view<br />
File:Mowi Printer nr-027.JPG|Closing<br />
File:Mowi Printer nr-036.JPG|Closed, Front<br />
File:Mowi Printer nr-038.JPG|Closed, Back<br />
File:Mowi_Printer_printing.JPG|Detail: Printing Dual colored "Open your Heart"<br />
File:Mowi_Printer_Power_and_USB.JPG|Detail: Power and USB connections<br />
File:Mowi_printer_display.JPG|Detail: Display<br />
File:Mowi_Printer_peek_inside.JPG|Detail: a peek inside reveals the Ramps and the powersupply<br />
</gallery></div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=146735Mowi printer2015-04-06T12:39:08Z<p>Mowi: Updated bill of materials after big redesign to Mowi v3</p>
<hr />
<div><br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = http://www.thingiverse.com/thing:218369<br />
}}<br />
<br />
[[File:Mowi Printer 3way.png|400px]]<br />
<br />
video on youtube: pdC9KxD-kWQ (sorry links are blocked)<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change.<br />
<br />
At the moment there is no build manual yet. I hope there is enough information to get you started on building your own Mowi printer. In the Step Assembly on Github you can see how everything fits together. Let me know when you start building so we can work on the documentation together. You can post any issues on the github. All help in improving the design and/or the documentation is very very welcome. Also the pictures and video are still from the previous version. I will try to update them soon.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 5 essential + 9 optional<br />
*Lasercut parts: 29 essential + 6 optional<br />
*Bought Parts: ???<br />
*Filament Size: 1.75mm<br />
*Electronics: [[RAMPS 1.4]]<br />
*Firmware: [[Marlin]]<br />
<br />
==Main Open Issues==<br />
*electronics cover needed<br />
I just did a mayor redesign that should have fixed all open issues. I will assemble it in the coming week and hopefully I will not run into any new issues.<br />
<br />
==Bill of Materials==<br />
<br />
Printed Parts, essential for printing:<br />
*extruder idler 2pcs<br />
*x idler<br />
*x motor mount <br />
*y belt clamp<br />
<br />
Printed Parts, optional:<br />
*hinge left<br />
*hinge right<br />
*knob<br />
*fanduct<br />
*nutlocker straight<br />
*nutlocker corner 2 pieces<br />
*spoolholder<br />
*spoolholderp2p<br />
<br />
Lasercut Parts, essential for printing:<br />
*YBottomFront<br />
*YBottomMiddle<br />
*YBottomBack<br />
*YFront<br />
*YBack<br />
*YRightBack<br />
*YRightFront<br />
*YCross<br />
*YLeft<br />
*Yidler<br />
*bed<br />
*ZBottom<br />
*ZBack<br />
*ZSide 2pieces<br />
*ZFrontLeft<br />
*ZFrontRight<br />
*ZTop<br />
*ZBarHolderLeft<br />
*ZBarHolderRight<br />
*extrudermiddle<br />
*extruderstepperholder left<br />
*extruderstepperholder<br />
*hotendholder<br />
*extruderadjuster<br />
*extruderlocker<br />
*Xendstop<br />
<br />
Lasercut Parts, optional:<br />
*hendel 2 pieces<br />
*display Bottom<br />
*display casing <br />
*display casing R <br />
*display wrap<br />
<br />
Lasercut Materials:<br />
*birch plywood, about 0,6m<math>^2</math> 5.8mm thick,<br />
*birch plywood, 145mm * 105 mm, 3mm thick<br />
*cardboard for electronics cover<br />
<br />
Bought Parts (I tried to use mostly (industry) standard parts so most parts can be bought at a lot of suppliers, the links are only an example)<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount_Full_Graphic_Smart_Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: Compact 12V 20A 240W Switching Power Supply, dimensions 165*100*40mm [http://www.ebay.com/itm/Compact-12V-20A-240W-Switching-Power-Supply-LED-Strip-Light-Driver-110V-220V-/181535667942?pt=LH_DefaultDomain_0&hash=item2a445e76e6 ebay psu] <br />
*Small Steppermotors: 3 pieces NEMA17 / 0.28Nm / 40mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Big Steppermotors:3 pieces NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pieces [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: 2 pieces module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pieces GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Hall Endstops: 2 pieces Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*inductive Endstop: Inductive Proximity Sensor,LJ8A3-2-Z/BX ,NPN,3-wire NO 8mm [http://www.aliexprexx.com/item/Inductive-Proximity-Sensor-LJ8A3-2-Z-BX-NPN-3-wire-NO-Proximity-Switch-M8/32237408492.html Aliexpress Sensor]<br />
*Lineair Bearings: 13 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://uk.farnell.com/multicomp/mc36328-011-01/switch-spdt-4a-250vac-black/dp/9562265?Ntt=9562265# Farnell on/off Rocker Switch]<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers, mostly m3<br />
*Glass 3mm 20x 26cm<br />
*Aluminium foil tape<br />
*[[Kapton Tape]] or 3M ScotchBlue 2090 Painter's Tape<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, unfortunately Aliexpress links are blocked on reprap.org due to spam)<br />
<br />
<br />
==Inspiration==<br />
The Design of the Mowi printer is based on the work of many other 3d printer designers, thanks a lot!!! Its inspired by [[Prusa i3]], [[Ultimaker]], [[FoldaRap]], [[Cartesio]], [http://3dbyflow.com/# by flow] and many many others.<br />
<br />
==Pictures==<br />
<gallery perrow=3 widths=400px heights=300px><br />
File:Mowi_Printer_nr-013.JPG|Front<br />
File:Mowi_Printer_nr-000.JPG|Front Right view<br />
File:Mowi_Printer_nr-004.JPG|Back Right view<br />
File:Mowi_Printer_nr-009.JPG|Left view<br />
File:Mowi Printer nr-027.JPG|Closing<br />
File:Mowi Printer nr-036.JPG|Closed, Front<br />
File:Mowi Printer nr-038.JPG|Closed, Back<br />
File:Mowi_Printer_printing.JPG|Detail: Printing Dual colored "Open your Heart"<br />
File:Mowi_Printer_Power_and_USB.JPG|Detail: Power and USB connections<br />
File:Mowi_printer_display.JPG|Detail: Display<br />
File:Mowi_Printer_peek_inside.JPG|Detail: a peek inside reveals the Ramps and the powersupply<br />
</gallery></div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=126595Mowi printer2014-05-26T19:48:25Z<p>Mowi: included thingiverse link</p>
<hr />
<div><br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = http://www.thingiverse.com/thing:218369<br />
}}<br />
<br />
[[File:Mowi Printer 3way.png|400px]]<br />
<br />
video on youtube: pdC9KxD-kWQ (sorry links are blocked)<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change. I also did some manual changes that are not reflected in the files yet.<br />
<br />
At the moment there is no build manual yet. I hope there is enough information to get you started on building your own Mowi printer. In the Step Assembly on Github you can see how everything fits together. Let me know when you start building so we can work on the documentation together. You can post any issues on the github. All help in improving the design and/or the documentation is very very welcome.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 10<br />
*Lasercut parts: 21<br />
*Bought Parts: ???<br />
*Filament Size: 1.75mm<br />
*Electronics: [[RAMPS 1.4]]<br />
*Firmware: [[Marlin]]<br />
<br />
==Main Open Issues==<br />
*The printer is not yet stable enough for reliable printing when placed on an uneven surface. (Find a way to fixate Y box to Z Frame for printing)<br />
*The cables get stuck underneath the hinge when unfolding and they get stuck between the x endstop and the x carriage. <br />
*The X-Carriage can only be printed with support and needs a lot of cleaning.<br />
*Dual extruder calibration.<br />
*Easier Assembly needed.<br />
*Less different vitamins.<br />
*Spoolholders that do not need to be removed for folding<br />
<br />
==Bill of Materials==<br />
I tried to use mostly (industry) standard parts so most parts can be bought at a lot of suppliers, the links are only an example. <br />
<br />
*Printed Parts <br />
*Lasercut Parts, birch plywood, 2,3 and 6 mm, cardboard<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount Smart Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: 12V 30A 360W Switching Power Supply, dimensions 199*110*50mm [http://www.aliexprexx.com/item/New-12V-20A-240W-Switching-Power-Supply-for-LED-Strip-light-220V/631998397.html# Aliexpress] These powersupplies are a little bit smaller than before, maybe you need to move the holes in your lasercut YBottomBack and YBottomMiddle)<br />
*Steppermotors: 3pcs NEMA17 / 0.28Nm / 40mm length,and 3pcs NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pcs [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pcs GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Endstops: Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*Lineair Bearings: 11 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://uk.farnell.com/multicomp/mc36328-011-01/switch-spdt-4a-250vac-black/dp/9562265?Ntt=9562265# Farnell on/off Rocker Switch]<br />
*USB inlet: [http://www.ebay.de/itm/USB-2-0-Kabel-Verlangerung-B-Stecker-B-Einbaubuchse0-5m-/300910569128?pt=DE_Computing_USB_Kabel_Hubs_Adapter&hash=item460faae6a8# Ebay USB B extension panelmount]<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers, mostly m3<br />
*[[Kapton Tape]]<br />
*Glass 3mm 20x 26cm<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, unfortunately Aliexpress links are blocked on reprap.org due to spam)<br />
<br />
<br />
==Inspiration==<br />
The Design of the Mowi printer is based on the work of many other 3d printer designers, thanks a lot!!! Its inspired by [[Prusa i3]], [[Ultimaker]], [[FoldaRap]], [[Cartesio]], [http://3dbyflow.com/# by flow] and many many others.<br />
<br />
==Pictures==<br />
<gallery perrow=3 widths=400px heights=300px><br />
File:Mowi_Printer_nr-013.JPG|Front<br />
File:Mowi_Printer_nr-000.JPG|Front Right view<br />
File:Mowi_Printer_nr-004.JPG|Back Right view<br />
File:Mowi_Printer_nr-009.JPG|Left view<br />
File:Mowi Printer nr-027.JPG|Closing<br />
File:Mowi Printer nr-036.JPG|Closed, Front<br />
File:Mowi Printer nr-038.JPG|Closed, Back<br />
File:Mowi_Printer_printing.JPG|Detail: Printing Dual colored "Open your Heart"<br />
File:Mowi_Printer_Power_and_USB.JPG|Detail: Power and USB connections<br />
File:Mowi_printer_display.JPG|Detail: Display<br />
File:Mowi_Printer_peek_inside.JPG|Detail: a peek inside reveals the Ramps and the powersupply<br />
</gallery></div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=122751Mowi printer2014-04-13T13:34:04Z<p>Mowi: added youtube video number</p>
<hr />
<div><br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = soon<br />
}}<br />
<br />
[[File:Mowi Printer 3way.png|400px]]<br />
<br />
video on youtube: pdC9KxD-kWQ (sorry links are blocked)<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change. I also did some manual changes that are not reflected in the files yet.<br />
<br />
At the moment there is no build manual yet. I hope there is enough information to get you started on building your own Mowi printer. In the Step Assembly on Github you can see how everything fits together. Let me know when you start building so we can work on the documentation together. You can post any issues on the github. All help in improving the design and/or the documentation is very very welcome.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 10<br />
*Lasercut parts: 21<br />
*Bought Parts: ???<br />
*Filament Size: 1.75mm<br />
*Electronics: [[RAMPS 1.4]]<br />
*Firmware: [[Marlin]]<br />
<br />
==Main Open Issues==<br />
*The printer is not yet stable enough for reliable printing when placed on an uneven surface. (Find a way to fixate Y box to Z Frame for printing)<br />
*The cables get stuck underneath the hinge when unfolding and they get stuck between the x endstop and the x carriage. <br />
*The X-Carriage can only be printed with support and needs a lot of cleaning.<br />
*Dual extruder calibration.<br />
*Easier Assembly needed.<br />
*Less different vitamins.<br />
*Spoolholders that do not need to be removed for folding<br />
<br />
==Bill of Materials==<br />
I tried to use mostly (industry) standard parts so most parts can be bought at a lot of suppliers, the links are only an example. <br />
<br />
*Printed Parts <br />
*Lasercut Parts, birch plywood, 2,3 and 6 mm, cardboard<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount Smart Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: 12V 30A 360W Switching Power Supply, dimensions 199*110*50mm [http://www.aliexprexx.com/item/New-12V-20A-240W-Switching-Power-Supply-for-LED-Strip-light-220V/631998397.html# Aliexpress] These powersupplies are a little bit smaller than before, maybe you need to move the holes in your lasercut YBottomBack and YBottomMiddle)<br />
*Steppermotors: 3pcs NEMA17 / 0.28Nm / 40mm length,and 3pcs NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pcs [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pcs GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Endstops: Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*Lineair Bearings: 11 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://uk.farnell.com/multicomp/mc36328-011-01/switch-spdt-4a-250vac-black/dp/9562265?Ntt=9562265# Farnell on/off Rocker Switch]<br />
*USB inlet: [http://www.ebay.de/itm/USB-2-0-Kabel-Verlangerung-B-Stecker-B-Einbaubuchse0-5m-/300910569128?pt=DE_Computing_USB_Kabel_Hubs_Adapter&hash=item460faae6a8# Ebay USB B extension panelmount]<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers, mostly m3<br />
*[[Kapton Tape]]<br />
*Glass 3mm 20x 26cm<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, unfortunately Aliexpress links are blocked on reprap.org due to spam)<br />
<br />
<br />
==Inspiration==<br />
The Design of the Mowi printer is based on the work of many other 3d printer designers, thanks a lot!!! Its inspired by [[Prusa i3]], [[Ultimaker]], [[FoldaRap]], [[Cartesio]], [http://3dbyflow.com/# by flow] and many many others.<br />
<br />
==Pictures==<br />
<gallery perrow=3 widths=400px heights=300px><br />
File:Mowi_Printer_nr-013.JPG|Front<br />
File:Mowi_Printer_nr-000.JPG|Front Right view<br />
File:Mowi_Printer_nr-004.JPG|Back Right view<br />
File:Mowi_Printer_nr-009.JPG|Left view<br />
File:Mowi Printer nr-027.JPG|Closing<br />
File:Mowi Printer nr-036.JPG|Closed, Front<br />
File:Mowi Printer nr-038.JPG|Closed, Back<br />
File:Mowi_Printer_printing.JPG|Detail: Printing Dual colored "Open your Heart"<br />
File:Mowi_Printer_Power_and_USB.JPG|Detail: Power and USB connections<br />
File:Mowi_printer_display.JPG|Detail: Display<br />
File:Mowi_Printer_peek_inside.JPG|Detail: a peek inside reveals the Ramps and the powersupply<br />
</gallery></div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=122750Mowi printer2014-04-13T13:13:22Z<p>Mowi: Undo revision 122749 by Mowi (talk)</p>
<hr />
<div><br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = soon<br />
}}<br />
<br />
[[File:Mowi Printer 3way.png|400px]]<br />
<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change. I also did some manual changes that are not reflected in the files yet.<br />
<br />
At the moment there is no build manual yet. I hope there is enough information to get you started on building your own Mowi printer. In the Step Assembly on Github you can see how everything fits together. Let me know when you start building so we can work on the documentation together. You can post any issues on the github. All help in improving the design and/or the documentation is very very welcome.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 10<br />
*Lasercut parts: 21<br />
*Bought Parts: ???<br />
*Filament Size: 1.75mm<br />
*Electronics: [[RAMPS 1.4]]<br />
*Firmware: [[Marlin]]<br />
<br />
==Main Open Issues==<br />
*The printer is not yet stable enough for reliable printing when placed on an uneven surface. (Find a way to fixate Y box to Z Frame for printing)<br />
*The cables get stuck underneath the hinge when unfolding and they get stuck between the x endstop and the x carriage. <br />
*The X-Carriage can only be printed with support and needs a lot of cleaning.<br />
*Dual extruder calibration.<br />
*Easier Assembly needed.<br />
*Less different vitamins.<br />
*Spoolholders that do not need to be removed for folding<br />
<br />
==Bill of Materials==<br />
I tried to use mostly (industry) standard parts so most parts can be bought at a lot of suppliers, the links are only an example. <br />
<br />
*Printed Parts <br />
*Lasercut Parts, birch plywood, 2,3 and 6 mm, cardboard<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount Smart Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: 12V 30A 360W Switching Power Supply, dimensions 199*110*50mm [http://www.aliexprexx.com/item/New-12V-20A-240W-Switching-Power-Supply-for-LED-Strip-light-220V/631998397.html# Aliexpress] These powersupplies are a little bit smaller than before, maybe you need to move the holes in your lasercut YBottomBack and YBottomMiddle)<br />
*Steppermotors: 3pcs NEMA17 / 0.28Nm / 40mm length,and 3pcs NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pcs [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pcs GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Endstops: Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*Lineair Bearings: 11 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://uk.farnell.com/multicomp/mc36328-011-01/switch-spdt-4a-250vac-black/dp/9562265?Ntt=9562265# Farnell on/off Rocker Switch]<br />
*USB inlet: [http://www.ebay.de/itm/USB-2-0-Kabel-Verlangerung-B-Stecker-B-Einbaubuchse0-5m-/300910569128?pt=DE_Computing_USB_Kabel_Hubs_Adapter&hash=item460faae6a8# Ebay USB B extension panelmount]<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers, mostly m3<br />
*[[Kapton Tape]]<br />
*Glass 3mm 20x 26cm<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, unfortunately Aliexpress links are blocked on reprap.org due to spam)<br />
<br />
<br />
==Inspiration==<br />
The Design of the Mowi printer is based on the work of many other 3d printer designers, thanks a lot!!! Its inspired by [[Prusa i3]], [[Ultimaker]], [[FoldaRap]], [[Cartesio]], [http://3dbyflow.com/# by flow] and many many others.<br />
<br />
==Pictures==<br />
<gallery perrow=3 widths=400px heights=300px><br />
File:Mowi_Printer_nr-013.JPG|Front<br />
File:Mowi_Printer_nr-000.JPG|Front Right view<br />
File:Mowi_Printer_nr-004.JPG|Back Right view<br />
File:Mowi_Printer_nr-009.JPG|Left view<br />
File:Mowi Printer nr-027.JPG|Closing<br />
File:Mowi Printer nr-036.JPG|Closed, Front<br />
File:Mowi Printer nr-038.JPG|Closed, Back<br />
File:Mowi_Printer_printing.JPG|Detail: Printing Dual colored "Open your Heart"<br />
File:Mowi_Printer_Power_and_USB.JPG|Detail: Power and USB connections<br />
File:Mowi_printer_display.JPG|Detail: Display<br />
File:Mowi_Printer_peek_inside.JPG|Detail: a peek inside reveals the Ramps and the powersupply<br />
</gallery></div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=122749Mowi printer2014-04-13T13:04:03Z<p>Mowi: video added</p>
<hr />
<div><br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = soon<br />
}}<br />
<videoflash>-pdC9KxD-kWQ</videoflash><br />
<br />
<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change. I also did some manual changes that are not reflected in the files yet.<br />
<br />
At the moment there is no build manual yet. I hope there is enough information to get you started on building your own Mowi printer. In the Step Assembly on Github you can see how everything fits together. Let me know when you start building so we can work on the documentation together. You can post any issues on the github. All help in improving the design and/or the documentation is very very welcome.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 10<br />
*Lasercut parts: 21<br />
*Bought Parts: ???<br />
*Filament Size: 1.75mm<br />
*Electronics: [[RAMPS 1.4]]<br />
*Firmware: [[Marlin]]<br />
<br />
==Main Open Issues==<br />
*The printer is not yet stable enough for reliable printing when placed on an uneven surface. (Find a way to fixate Y box to Z Frame for printing)<br />
*The cables get stuck underneath the hinge when unfolding and they get stuck between the x endstop and the x carriage. <br />
*The X-Carriage can only be printed with support and needs a lot of cleaning.<br />
*Dual extruder calibration.<br />
*Easier Assembly needed.<br />
*Less different vitamins.<br />
*Spoolholders that do not need to be removed for folding<br />
<br />
==Bill of Materials==<br />
I tried to use mostly (industry) standard parts so most parts can be bought at a lot of suppliers, the links are only an example. <br />
<br />
*Printed Parts <br />
*Lasercut Parts, birch plywood, 2,3 and 6 mm, cardboard<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount Smart Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: 12V 30A 360W Switching Power Supply, dimensions 199*110*50mm [http://www.aliexprexx.com/item/New-12V-20A-240W-Switching-Power-Supply-for-LED-Strip-light-220V/631998397.html# Aliexpress] These powersupplies are a little bit smaller than before, maybe you need to move the holes in your lasercut YBottomBack and YBottomMiddle)<br />
*Steppermotors: 3pcs NEMA17 / 0.28Nm / 40mm length,and 3pcs NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pcs [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pcs GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Endstops: Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*Lineair Bearings: 11 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://uk.farnell.com/multicomp/mc36328-011-01/switch-spdt-4a-250vac-black/dp/9562265?Ntt=9562265# Farnell on/off Rocker Switch]<br />
*USB inlet: [http://www.ebay.de/itm/USB-2-0-Kabel-Verlangerung-B-Stecker-B-Einbaubuchse0-5m-/300910569128?pt=DE_Computing_USB_Kabel_Hubs_Adapter&hash=item460faae6a8# Ebay USB B extension panelmount]<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers, mostly m3<br />
*[[Kapton Tape]]<br />
*Glass 3mm 20x 26cm<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, unfortunately Aliexpress links are blocked on reprap.org due to spam)<br />
<br />
<br />
==Inspiration==<br />
The Design of the Mowi printer is based on the work of many other 3d printer designers, thanks a lot!!! Its inspired by [[Prusa i3]], [[Ultimaker]], [[FoldaRap]], [[Cartesio]], [http://3dbyflow.com/# by flow] and many many others.<br />
<br />
==Pictures==<br />
<gallery perrow=3 widths=400px heights=300px><br />
File:Mowi_Printer_nr-013.JPG|Front<br />
File:Mowi_Printer_nr-000.JPG|Front Right view<br />
File:Mowi_Printer_nr-004.JPG|Back Right view<br />
File:Mowi_Printer_nr-009.JPG|Left view<br />
File:Mowi Printer nr-027.JPG|Closing<br />
File:Mowi Printer nr-036.JPG|Closed, Front<br />
File:Mowi Printer nr-038.JPG|Closed, Back<br />
File:Mowi_Printer_printing.JPG|Detail: Printing Dual colored "Open your Heart"<br />
File:Mowi_Printer_Power_and_USB.JPG|Detail: Power and USB connections<br />
File:Mowi_printer_display.JPG|Detail: Display<br />
File:Mowi_Printer_peek_inside.JPG|Detail: a peek inside reveals the Ramps and the powersupply<br />
File:Mowi Printer 3way.png<br />
</gallery></div>Mowihttps://reprap.org/mediawiki/index.php?title=User:Mowi&diff=114522User:Mowi2014-01-04T20:15:14Z<p>Mowi: </p>
<hr />
<div>More about Mowi on [http://www.thingiverse.com/mowi/overview# Thingiverse]</div>Mowihttps://reprap.org/mediawiki/index.php?title=User:Mowi&diff=114521User:Mowi2014-01-04T20:12:57Z<p>Mowi: Created page with "More about Mowi on [http://www.thingiverse.com/mowi/overview#Thingiverse]"</p>
<hr />
<div>More about Mowi on [http://www.thingiverse.com/mowi/overview#Thingiverse]</div>Mowihttps://reprap.org/mediawiki/index.php?title=File:Mowi_Printer_3way.png&diff=114413File:Mowi Printer 3way.png2014-01-03T16:35:22Z<p>Mowi: Mowi uploaded a new version of &quot;File:Mowi Printer 3way.png&quot;: smaller. hopefully the thumbnails will work this time</p>
<hr />
<div>Mowi Printer overview, printing and folded</div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=114412Mowi printer2014-01-03T16:22:27Z<p>Mowi: included overview picture</p>
<hr />
<div><br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = soon<br />
}}<br />
<br />
[[File:Mowi Printer 3way.png|400px]]<br />
<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change. I also did some manual changes that are not reflected in the files yet.<br />
<br />
At the moment there is no build manual yet. I hope there is enough information to get you started on building your own Mowi printer. In the Step Assembly on Github you can see how everything fits together. Let me know when you start building so we can work on the documentation together. You can post any issues on the github. All help in improving the design and/or the documentation is very very welcome.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 10<br />
*Lasercut parts: 21<br />
*Bought Parts: ???<br />
*Filament Size: 1.75mm<br />
*Electronics: [[RAMPS 1.4]]<br />
*Firmware: [[Marlin]]<br />
<br />
==Main Open Issues==<br />
*The printer is not yet stable enough for reliable printing when placed on an uneven surface. (Find a way to fixate Y box to Z Frame for printing)<br />
*The cables get stuck underneath the hinge when unfolding and they get stuck between the x endstop and the x carriage. <br />
*The X-Carriage can only be printed with support and needs a lot of cleaning.<br />
*Dual extruder calibration.<br />
*Easier Assembly needed.<br />
*Less different vitamins.<br />
*Spoolholders that do not need to be removed for folding<br />
<br />
==Bill of Materials==<br />
I tried to use mostly (industry) standard parts so most parts can be bought at a lot of suppliers, the links are only an example. <br />
<br />
*Printed Parts <br />
*Lasercut Parts, birch plywood, 2,3 and 6 mm, cardboard<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount Smart Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: 12V 30A 360W Switching Power Supply, dimensions 199*110*50mm [http://www.aliexprexx.com/item/New-12V-20A-240W-Switching-Power-Supply-for-LED-Strip-light-220V/631998397.html# Aliexpress] These powersupplies are a little bit smaller than before, maybe you need to move the holes in your lasercut YBottomBack and YBottomMiddle)<br />
*Steppermotors: 3pcs NEMA17 / 0.28Nm / 40mm length,and 3pcs NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pcs [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pcs GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Endstops: Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*Lineair Bearings: 11 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://uk.farnell.com/multicomp/mc36328-011-01/switch-spdt-4a-250vac-black/dp/9562265?Ntt=9562265# Farnell on/off Rocker Switch]<br />
*USB inlet: [http://www.ebay.de/itm/USB-2-0-Kabel-Verlangerung-B-Stecker-B-Einbaubuchse0-5m-/300910569128?pt=DE_Computing_USB_Kabel_Hubs_Adapter&hash=item460faae6a8# Ebay USB B extension panelmount]<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers, mostly m3<br />
*[[Kapton Tape]]<br />
*Glass 3mm 20x 26cm<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, unfortunately Aliexpress links are blocked on reprap.org due to spam)<br />
<br />
<br />
==Inspiration==<br />
The Design of the Mowi printer is based on the work of many other 3d printer designers, thanks a lot!!! Its inspired by [[Prusa i3]], [[Ultimaker]], [[FoldaRap]], [[Cartesio]], [http://3dbyflow.com/# by flow] and many many others.<br />
<br />
==Pictures==<br />
<gallery perrow=3 widths=400px heights=300px><br />
File:Mowi_Printer_nr-013.JPG|Front<br />
File:Mowi_Printer_nr-000.JPG|Front Right view<br />
File:Mowi_Printer_nr-004.JPG|Back Right view<br />
File:Mowi_Printer_nr-009.JPG|Left view<br />
File:Mowi Printer nr-027.JPG|Closing<br />
File:Mowi Printer nr-036.JPG|Closed, Front<br />
File:Mowi Printer nr-038.JPG|Closed, Back<br />
File:Mowi_Printer_printing.JPG|Detail: Printing Dual colored "Open your Heart"<br />
File:Mowi_Printer_Power_and_USB.JPG|Detail: Power and USB connections<br />
File:Mowi_printer_display.JPG|Detail: Display<br />
File:Mowi_Printer_peek_inside.JPG|Detail: a peek inside reveals the Ramps and the powersupply<br />
</gallery></div>Mowihttps://reprap.org/mediawiki/index.php?title=File:Mowi_Printer_3way.png&diff=114411File:Mowi Printer 3way.png2014-01-03T16:09:18Z<p>Mowi: Mowi Printer overview, printing and folded</p>
<hr />
<div>Mowi Printer overview, printing and folded</div>Mowihttps://reprap.org/mediawiki/index.php?title=File:Mowi_Printer.jpg&diff=114408File:Mowi Printer.jpg2014-01-03T15:28:45Z<p>Mowi: Mowi uploaded a new version of &quot;File:Mowi Printer.jpg&quot;: mixup</p>
<hr />
<div></div>Mowihttps://reprap.org/mediawiki/index.php?title=File:Mowi_Printer.jpg&diff=114406File:Mowi Printer.jpg2014-01-03T15:00:02Z<p>Mowi: Mowi uploaded a new version of &quot;File:Mowi Printer.jpg&quot;</p>
<hr />
<div></div>Mowihttps://reprap.org/mediawiki/index.php?title=File:Mowi_Printer.jpg&diff=114405File:Mowi Printer.jpg2014-01-03T14:51:00Z<p>Mowi: Mowi uploaded a new version of &quot;File:Mowi Printer.jpg&quot;</p>
<hr />
<div></div>Mowihttps://reprap.org/mediawiki/index.php?title=File:Mowi_Printer_nr-013.JPG&diff=114368File:Mowi Printer nr-013.JPG2014-01-02T23:27:14Z<p>Mowi: Mowi Printer, Front</p>
<hr />
<div>Mowi Printer, Front</div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=114367Mowi printer2014-01-02T23:25:44Z<p>Mowi: /* Pictures */</p>
<hr />
<div><br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = soon<br />
}}<br />
<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change. I also did some manual changes that are not reflected in the files yet.<br />
<br />
At the moment there is no build manual yet. I hope there is enough information to get you started on building your own Mowi printer. In the Step Assembly on Github you can see how everything fits together. Let me know when you start building so we can work on the documentation together. You can post any issues on the github. All help in improving the design and/or the documentation is very very welcome.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 10<br />
*Lasercut parts: 21<br />
*Bought Parts: ???<br />
*Filament Size: 1.75mm<br />
*Electronics: [[RAMPS 1.4]]<br />
*Firmware: [[Marlin]]<br />
<br />
==Main Open Issues==<br />
*The printer is not yet stable enough for reliable printing when placed on an uneven surface. (Find a way to fixate Y box to Z Frame for printing)<br />
*The cables get stuck underneath the hinge when unfolding and they get stuck between the x endstop and the x carriage. <br />
*The X-Carriage can only be printed with support and needs a lot of cleaning.<br />
*Dual extruder calibration.<br />
*Easier Assembly needed.<br />
*Less different vitamins.<br />
*Spoolholders that do not need to be removed for folding<br />
<br />
==Bill of Materials==<br />
I tried to use mostly (industry) standard parts so most parts can be bought at a lot of suppliers, the links are only an example. <br />
<br />
*Printed Parts <br />
*Lasercut Parts, birch plywood, 2,3 and 6 mm, cardboard<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount Smart Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: 12V 30A 360W Switching Power Supply, dimensions 199*110*50mm [http://www.aliexprexx.com/item/New-12V-20A-240W-Switching-Power-Supply-for-LED-Strip-light-220V/631998397.html# Aliexpress] These powersupplies are a little bit smaller than before, maybe you need to move the holes in your lasercut YBottomBack and YBottomMiddle)<br />
*Steppermotors: 3pcs NEMA17 / 0.28Nm / 40mm length,and 3pcs NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pcs [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pcs GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Endstops: Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*Lineair Bearings: 11 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://uk.farnell.com/multicomp/mc36328-011-01/switch-spdt-4a-250vac-black/dp/9562265?Ntt=9562265# Farnell on/off Rocker Switch]<br />
*USB inlet: [http://www.ebay.de/itm/USB-2-0-Kabel-Verlangerung-B-Stecker-B-Einbaubuchse0-5m-/300910569128?pt=DE_Computing_USB_Kabel_Hubs_Adapter&hash=item460faae6a8# Ebay USB B extension panelmount]<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers, mostly m3<br />
*[[Kapton Tape]]<br />
*Glass 3mm 20x 26cm<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, unfortunately Aliexpress links are blocked on reprap.org due to spam)<br />
<br />
<br />
==Inspiration==<br />
The Design of the Mowi printer is based on the work of many other 3d printer designers, thanks a lot!!! Its inspired by [[Prusa i3]], [[Ultimaker]], [[FoldaRap]], [[Cartesio]], [http://3dbyflow.com/# by flow] and many many others.<br />
<br />
==Pictures==<br />
<gallery perrow=3 widths=400px heights=300px><br />
File:Mowi_Printer_nr-013.JPG|Front<br />
File:Mowi_Printer_nr-000.JPG|Front Right view<br />
File:Mowi_Printer_nr-004.JPG|Back Right view<br />
File:Mowi_Printer_nr-009.JPG|Left view<br />
File:Mowi Printer nr-027.JPG|Closing<br />
File:Mowi Printer nr-036.JPG|Closed, Front<br />
File:Mowi Printer nr-038.JPG|Closed, Back<br />
File:Mowi_Printer_printing.JPG|Detail: Printing Dual colored "Open your Heart"<br />
File:Mowi_Printer_Power_and_USB.JPG|Detail: Power and USB connections<br />
File:Mowi_printer_display.JPG|Detail: Display<br />
File:Mowi_Printer_peek_inside.JPG|Detail: a peek inside reveals the Ramps and the powersupply<br />
</gallery></div>Mowihttps://reprap.org/mediawiki/index.php?title=File:Mowi_Printer_peek_inside.JPG&diff=114364File:Mowi Printer peek inside.JPG2014-01-02T23:20:24Z<p>Mowi: a Peek inside the Mowi Printer, the Ramps and Powersupply are visible</p>
<hr />
<div>a Peek inside the Mowi Printer, the Ramps and Powersupply are visible</div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=114363Mowi printer2014-01-02T23:18:47Z<p>Mowi: more pictures</p>
<hr />
<div><br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = soon<br />
}}<br />
<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change. I also did some manual changes that are not reflected in the files yet.<br />
<br />
At the moment there is no build manual yet. I hope there is enough information to get you started on building your own Mowi printer. In the Step Assembly on Github you can see how everything fits together. Let me know when you start building so we can work on the documentation together. You can post any issues on the github. All help in improving the design and/or the documentation is very very welcome.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 10<br />
*Lasercut parts: 21<br />
*Bought Parts: ???<br />
*Filament Size: 1.75mm<br />
*Electronics: [[RAMPS 1.4]]<br />
*Firmware: [[Marlin]]<br />
<br />
==Main Open Issues==<br />
*The printer is not yet stable enough for reliable printing when placed on an uneven surface. (Find a way to fixate Y box to Z Frame for printing)<br />
*The cables get stuck underneath the hinge when unfolding and they get stuck between the x endstop and the x carriage. <br />
*The X-Carriage can only be printed with support and needs a lot of cleaning.<br />
*Dual extruder calibration.<br />
*Easier Assembly needed.<br />
*Less different vitamins.<br />
*Spoolholders that do not need to be removed for folding<br />
<br />
==Bill of Materials==<br />
I tried to use mostly (industry) standard parts so most parts can be bought at a lot of suppliers, the links are only an example. <br />
<br />
*Printed Parts <br />
*Lasercut Parts, birch plywood, 2,3 and 6 mm, cardboard<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount Smart Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: 12V 30A 360W Switching Power Supply, dimensions 199*110*50mm [http://www.aliexprexx.com/item/New-12V-20A-240W-Switching-Power-Supply-for-LED-Strip-light-220V/631998397.html# Aliexpress] These powersupplies are a little bit smaller than before, maybe you need to move the holes in your lasercut YBottomBack and YBottomMiddle)<br />
*Steppermotors: 3pcs NEMA17 / 0.28Nm / 40mm length,and 3pcs NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pcs [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pcs GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Endstops: Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*Lineair Bearings: 11 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://uk.farnell.com/multicomp/mc36328-011-01/switch-spdt-4a-250vac-black/dp/9562265?Ntt=9562265# Farnell on/off Rocker Switch]<br />
*USB inlet: [http://www.ebay.de/itm/USB-2-0-Kabel-Verlangerung-B-Stecker-B-Einbaubuchse0-5m-/300910569128?pt=DE_Computing_USB_Kabel_Hubs_Adapter&hash=item460faae6a8# Ebay USB B extension panelmount]<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers, mostly m3<br />
*[[Kapton Tape]]<br />
*Glass 3mm 20x 26cm<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, unfortunately Aliexpress links are blocked on reprap.org due to spam)<br />
<br />
<br />
==Inspiration==<br />
The Design of the Mowi printer is based on the work of many other 3d printer designers, thanks a lot!!! Its inspired by [[Prusa i3]], [[Ultimaker]], [[FoldaRap]], [[Cartesio]], [http://3dbyflow.com/# by flow] and many many others.<br />
<br />
==Pictures==<br />
<gallery perrow=3 widths=400px heights=300px><br />
File:Mowi_Printer_nr-000.JPG|Front Right view<br />
File:Mowi_Printer_nr-004.JPG|Back Right view<br />
File:Mowi_Printer_nr-009.JPG|Left view<br />
File:Mowi Printer nr-027.JPG|Closing<br />
File:Mowi Printer nr-036.JPG|Closed, Front<br />
File:Mowi Printer nr-038.JPG|Closed, Back<br />
File:Mowi_Printer_printing.JPG|Detail: Printing Dual colored "Open your Heart"<br />
File:Mowi_Printer_Power_and_USB.JPG|Detail: Power and USB connections<br />
File:Mowi_printer_display.JPG|Detail: Display<br />
File:Mowi_Printer_peek_inside.JPG|Detail: a peek inside reveals the Ramps and the powersupply<br />
</gallery></div>Mowihttps://reprap.org/mediawiki/index.php?title=File:Mowi_printer_display.JPG&diff=114362File:Mowi printer display.JPG2014-01-02T23:18:29Z<p>Mowi: Mowi Printer: Display, SD card and control</p>
<hr />
<div>Mowi Printer: Display, SD card and control</div>Mowihttps://reprap.org/mediawiki/index.php?title=File:Mowi_Printer_Power_and_USB.JPG&diff=114361File:Mowi Printer Power and USB.JPG2014-01-02T23:11:53Z<p>Mowi: Mowi Printer detail, power inlet, power switch and USB connection</p>
<hr />
<div>Mowi Printer detail, power inlet, power switch and USB connection</div>Mowihttps://reprap.org/mediawiki/index.php?title=File:Mowi_Printer_printing.JPG&diff=114360File:Mowi Printer printing.JPG2014-01-02T23:10:46Z<p>Mowi: Mowi Printer printing a dual colored "Open your Heart"</p>
<hr />
<div>Mowi Printer printing a dual colored "Open your Heart"</div>Mowihttps://reprap.org/mediawiki/index.php?title=File:Mowi_Printer_nr-038.JPG&diff=114359File:Mowi Printer nr-038.JPG2014-01-02T23:05:58Z<p>Mowi: Mowi Printer, Closed, Back</p>
<hr />
<div>Mowi Printer, Closed, Back</div>Mowihttps://reprap.org/mediawiki/index.php?title=File:Mowi_Printer_nr-036.JPG&diff=114358File:Mowi Printer nr-036.JPG2014-01-02T22:58:25Z<p>Mowi: Closed</p>
<hr />
<div>Closed</div>Mowihttps://reprap.org/mediawiki/index.php?title=File:Mowi_Printer_nr-027.JPG&diff=114357File:Mowi Printer nr-027.JPG2014-01-02T22:36:28Z<p>Mowi: Folding</p>
<hr />
<div>Folding</div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=114356Mowi printer2014-01-02T22:32:39Z<p>Mowi: Pictures added</p>
<hr />
<div><br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = soon<br />
}}<br />
<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change. I also did some manual changes that are not reflected in the files yet.<br />
<br />
At the moment there is no build manual yet. I hope there is enough information to get you started on building your own Mowi printer. In the Step Assembly on Github you can see how everything fits together. Let me know when you start building so we can work on the documentation together. You can post any issues on the github. All help in improving the design and/or the documentation is very very welcome.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 10<br />
*Lasercut parts: 21<br />
*Bought Parts: ???<br />
*Filament Size: 1.75mm<br />
*Electronics: [[RAMPS 1.4]]<br />
*Firmware: [[Marlin]]<br />
<br />
==Main Open Issues==<br />
*The printer is not yet stable enough for reliable printing when placed on an uneven surface. (Find a way to fixate Y box to Z Frame for printing)<br />
*The cables get stuck underneath the hinge when unfolding and they get stuck between the x endstop and the x carriage. <br />
*The X-Carriage can only be printed with support and needs a lot of cleaning.<br />
*Dual extruder calibration.<br />
*Easier Assembly needed.<br />
*Less different vitamins.<br />
*Spoolholders that do not need to be removed for folding<br />
<br />
==Bill of Materials==<br />
I tried to use mostly (industry) standard parts so most parts can be bought at a lot of suppliers, the links are only an example. <br />
<br />
*Printed Parts <br />
*Lasercut Parts, birch plywood, 2,3 and 6 mm, cardboard<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount Smart Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: 12V 30A 360W Switching Power Supply, dimensions 199*110*50mm [http://www.aliexprexx.com/item/New-12V-20A-240W-Switching-Power-Supply-for-LED-Strip-light-220V/631998397.html# Aliexpress] These powersupplies are a little bit smaller than before, maybe you need to move the holes in your lasercut YBottomBack and YBottomMiddle)<br />
*Steppermotors: 3pcs NEMA17 / 0.28Nm / 40mm length,and 3pcs NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pcs [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pcs GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Endstops: Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*Lineair Bearings: 11 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://uk.farnell.com/multicomp/mc36328-011-01/switch-spdt-4a-250vac-black/dp/9562265?Ntt=9562265# Farnell on/off Rocker Switch]<br />
*USB inlet: [http://www.ebay.de/itm/USB-2-0-Kabel-Verlangerung-B-Stecker-B-Einbaubuchse0-5m-/300910569128?pt=DE_Computing_USB_Kabel_Hubs_Adapter&hash=item460faae6a8# Ebay USB B extension panelmount]<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers, mostly m3<br />
*[[Kapton Tape]]<br />
*Glass 3mm 20x 26cm<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, unfortunately Aliexpress links are blocked on reprap.org due to spam)<br />
<br />
<br />
==Inspiration==<br />
The Design of the Mowi printer is based on the work of many other 3d printer designers, thanks a lot!!! Its inspired by [[Prusa i3]], [[Ultimaker]], [[FoldaRap]], [[Cartesio]], [http://3dbyflow.com/# by flow] and many many others.<br />
<br />
==Pictures==<br />
<gallery perrow=3 widths=400px heights=300px><br />
File:Mowi_Printer_nr-000.JPG|Front Right view<br />
File:Mowi_Printer_nr-004.JPG|Back Right view<br />
File:Mowi_Printer_nr-009.JPG|Left view<br />
</gallery></div>Mowihttps://reprap.org/mediawiki/index.php?title=File:Mowi_Printer_nr-009.JPG&diff=114355File:Mowi Printer nr-009.JPG2014-01-02T22:16:46Z<p>Mowi: </p>
<hr />
<div></div>Mowihttps://reprap.org/mediawiki/index.php?title=File:Mowi_Printer_nr-004.JPG&diff=114354File:Mowi Printer nr-004.JPG2014-01-02T22:11:25Z<p>Mowi: </p>
<hr />
<div></div>Mowihttps://reprap.org/mediawiki/index.php?title=File:Mowi_Printer_nr-000.JPG&diff=114353File:Mowi Printer nr-000.JPG2014-01-02T22:03:24Z<p>Mowi: </p>
<hr />
<div></div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=114333Mowi printer2014-01-02T20:00:41Z<p>Mowi: </p>
<hr />
<div><br />
<br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = soon<br />
}}<br />
<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change. I also did some manual changes that are not reflected in the files yet.<br />
<br />
At the moment there is no build manual yet. I hope there is enough information to get you started on building your own Mowi printer. In the Step Assembly on Github you can see how everything fits together. Let me know when you start building so we can work on the documentation together. You can post any issues on the github. All help in improving the design and/or the documentation is very very welcome.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 10<br />
*Lasercut parts: 21<br />
*Bought Parts: ???<br />
*Electronics: [[RAMPS 1.4]]<br />
*Firmware: [[Marlin]]<br />
<br />
==Main Open Issues==<br />
*The printer is not yet stable enough for reliable printing when placed on an uneven surface. (Find a way to fixate Y box to Z Frame for printing)<br />
*The cables get stuck underneath the hinge when unfolding and they get stuck between the x endstop and the x carriage. <br />
*The X-Carriage can only be printed with support and needs a lot of cleaning.<br />
*Dual extruder calibration.<br />
*Easier Assembly needed.<br />
*Less different vitamins.<br />
*Spoolholders that do not need to be removed for folding<br />
<br />
==Bill of Materials==<br />
I tried to use mostly (industry) standard parts so most parts can be bought at a lot of suppliers, the links are only an example. <br />
<br />
*Printed Parts <br />
*Lasercut Parts, birch plywood, 2,3 and 6 mm, cardboard<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount Smart Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: 12V 30A 360W Switching Power Supply, dimensions 199*110*50mm [http://www.aliexprexx.com/item/New-12V-20A-240W-Switching-Power-Supply-for-LED-Strip-light-220V/631998397.html# Aliexpress] These powersupplies are a little bit smaller than before, maybe you need to move the holes in your lasercut YBottomBack and YBottomMiddle)<br />
*Steppermotors: 3pcs NEMA17 / 0.28Nm / 40mm length,and 3pcs NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pcs [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pcs GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Endstops: Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*Lineair Bearings: 11 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://uk.farnell.com/multicomp/mc36328-011-01/switch-spdt-4a-250vac-black/dp/9562265?Ntt=9562265# Farnell on/off Rocker Switch]<br />
*USB inlet: [http://www.ebay.de/itm/USB-2-0-Kabel-Verlangerung-B-Stecker-B-Einbaubuchse0-5m-/300910569128?pt=DE_Computing_USB_Kabel_Hubs_Adapter&hash=item460faae6a8# Ebay USB B extension panelmount]<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers, mostly m3<br />
*[[Kapton Tape]]<br />
*Glass 3mm 20x 26cm<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, unfortunately Aliexpress links are blocked on reprap.org due to spam)<br />
<br />
<br />
==Inspiration==<br />
The Design of the Mowi printer is based on the work of many other 3d printer designers, thanks a lot!!! Its inspired by [[Prusa i3]], [[Ultimaker]], [[Foldarap]], [[Cartesio]], [http://3dbyflow.com/# by flow] and many many others.</div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=114331Mowi printer2014-01-02T19:23:42Z<p>Mowi: /* Main Open Issues */</p>
<hr />
<div><br />
<br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = soon<br />
}}<br />
<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change. I also did some manual changes that are not reflected in the files yet.<br />
<br />
At the moment there is no build manual yet. In the Step Assembly on Github you can see how everything fits together. If you have any issues please post them on the github. All help in improving the design and/or the documentation is welcome.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 10<br />
*Lasercut parts: 21<br />
*Bought Parts: ???<br />
*Electronics: Ramps 1.4<br />
<br />
==Main Open Issues==<br />
*The printer is not yet stable enough for reliable printing when placed on an uneven surface. (Find a way to fixate Y box to Z Frame for printing)<br />
*The cables get stuck underneath hinge when unfolding and they get stuck between the x endstop and the x carriage. <br />
*X- Carriage can only be printed with support and needs a lot of cleaning.<br />
*Dual extruder calibration.<br />
*Easier Assembly.<br />
*Less different vitamins.<br />
*spoolholders that do not need to be removed for folding<br />
<br />
==Bill of Materials==<br />
I tried to use mostly (industry) standard parts so most parts can be bought at a lot of suppliers, the links are only an example. <br />
<br />
*Printed Parts <br />
*Lasercut Parts, birch plywood, 2,3 and 6 mm, cardboard<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount Smart Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: 12V 30A 360W Switching Power Supply, dimensions 199*110*50mm [http://www.aliexprexx.com/item/New-12V-20A-240W-Switching-Power-Supply-for-LED-Strip-light-220V/631998397.html# Aliexpress] These powersupplies are a little bit smaller than before, maybe you need to move the holes in your lasercut YBottomBack and YBottomMiddle)<br />
*Steppermotors: 3pcs NEMA17 / 0.28Nm / 40mm length,and 3pcs NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pcs [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pcs GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Endstops: Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*Lineair Bearings: 11 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://uk.farnell.com/multicomp/mc36328-011-01/switch-spdt-4a-250vac-black/dp/9562265?Ntt=9562265# Farnell on/off Rocker Switch]<br />
*USB inlet: [http://www.ebay.de/itm/USB-2-0-Kabel-Verlangerung-B-Stecker-B-Einbaubuchse0-5m-/300910569128?pt=DE_Computing_USB_Kabel_Hubs_Adapter&hash=item460faae6a8# Ebay USB B extension panelmount]<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers<br />
*[[Kapton Tape]]<br />
*Glass 3mm 20x 20cm<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, Aliexpress links are blocked due to spam)</div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=109454Mowi printer2013-11-02T20:20:52Z<p>Mowi: /* Bill of Materials */</p>
<hr />
<div><br />
<br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = soon<br />
}}<br />
<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change. I also did some manual changes that are not reflected in the files yet.<br />
<br />
At the moment there is no build manual yet. In the Step Assembly on Github you can see how everything fits together. If you have any issues please post them on the github. All help in improving the design and/or the documentation is welcome.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 10<br />
*Lasercut parts: 21<br />
*Bought Parts: ???<br />
*Electronics: Ramps 1.4<br />
<br />
==Main Open Issues==<br />
*The printer is not yet stable enough for reliable printing when placed on an uneven surface. (Find a way to fixate Y box to Z Frame for printing)<br />
*The cables get stuck underneath hinge when unfolding and they get stuck betwee de x endstop and the x carriage. <br />
*X- Carriage can only be printed with support and needs a lot of cleaning.<br />
*Dual extruder calibration.<br />
*Easier Assembly<br />
*Less different vitamins<br />
<br />
==Bill of Materials==<br />
I tried to use mostly (industry) standard parts so most parts can be bought at a lot of suppliers, the links are only an example. <br />
<br />
*Printed Parts <br />
*Lasercut Parts, birch plywood, 2,3 and 6 mm, cardboard<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount Smart Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: 12V 30A 360W Switching Power Supply, dimensions 199*110*50mm [http://www.aliexprexx.com/item/New-12V-20A-240W-Switching-Power-Supply-for-LED-Strip-light-220V/631998397.html# Aliexpress] These powersupplies are a little bit smaller than before, maybe you need to move the holes in your lasercut YBottomBack and YBottomMiddle)<br />
*Steppermotors: 3pcs NEMA17 / 0.28Nm / 40mm length,and 3pcs NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pcs [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pcs GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Endstops: Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*Lineair Bearings: 11 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://uk.farnell.com/multicomp/mc36328-011-01/switch-spdt-4a-250vac-black/dp/9562265?Ntt=9562265# Farnell on/off Rocker Switch]<br />
*USB inlet: [http://www.ebay.de/itm/USB-2-0-Kabel-Verlangerung-B-Stecker-B-Einbaubuchse0-5m-/300910569128?pt=DE_Computing_USB_Kabel_Hubs_Adapter&hash=item460faae6a8# Ebay USB B extension panelmount]<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers<br />
*[[Kapton Tape]]<br />
*Glass 3mm 20x 20cm<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, Aliexpress links are blocked due to spam)</div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=109283Mowi printer2013-10-30T22:33:24Z<p>Mowi: /* Introduction */</p>
<hr />
<div><br />
<br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = soon<br />
}}<br />
<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change. I also did some manual changes that are not reflected in the files yet.<br />
<br />
At the moment there is no build manual yet. In the Step Assembly on Github you can see how everything fits together. If you have any issues please post them on the github. All help in improving the design and/or the documentation is welcome.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 10<br />
*Lasercut parts: 21<br />
*Bought Parts: ???<br />
*Electronics: Ramps 1.4<br />
<br />
==Main Open Issues==<br />
*The printer is not yet stable enough for reliable printing when placed on an uneven surface. (Find a way to fixate Y box to Z Frame for printing)<br />
*The cables get stuck underneath hinge when unfolding and they get stuck betwee de x endstop and the x carriage. <br />
*X- Carriage can only be printed with support and needs a lot of cleaning.<br />
*Dual extruder calibration.<br />
*Easier Assembly<br />
*Less different vitamins<br />
<br />
==Bill of Materials==<br />
I tried to use as much (industry) standard parts as possible so most parts can be bought at a lot of suppliers, the links are only an example. <br />
<br />
*Printed Parts <br />
*Lasercut Parts, birch plywood, 2,3 and 6 mm, cardboard<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount Smart Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: 12V 30A 360W Switching Power Supply, dimensions 199*110*50mm [http://www.aliexprexx.com/item/New-12V-20A-240W-Switching-Power-Supply-for-LED-Strip-light-220V/631998397.html# Aliexpress] These powersupplies are a little bit smaller than before, maybe you need to move the holes in your lasercut YBottomBack and YBottomMiddle)<br />
*Steppermotors: 3pcs NEMA17 / 0.28Nm / 40mm length,and 3pcs NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pcs [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pcs GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Endstops: Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*Lineair Bearings: 11 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://uk.farnell.com/multicomp/mc36328-011-01/switch-spdt-4a-250vac-black/dp/9562265?Ntt=9562265# Farnell on/off Rocker Switch]<br />
*USB inlet: [http://www.ebay.de/itm/USB-2-0-Kabel-Verlangerung-B-Stecker-B-Einbaubuchse0-5m-/300910569128?pt=DE_Computing_USB_Kabel_Hubs_Adapter&hash=item460faae6a8# Ebay USB B extension panelmount]<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers<br />
*[[Kapton Tape]]<br />
*Glass 3mm 20x 20cm<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, Aliexpress links are blocked due to spam)</div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=109272Mowi printer2013-10-30T19:18:49Z<p>Mowi: /* Bill of Materials */</p>
<hr />
<div><br />
<br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = soon<br />
}}<br />
<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change. I also did some manual changes that are not reflected in the files yet.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 10<br />
*Lasercut parts: 21<br />
*Bought Parts: ???<br />
*Electronics: Ramps 1.4<br />
<br />
==Main Open Issues==<br />
*The printer is not yet stable enough for reliable printing when placed on an uneven surface. (Find a way to fixate Y box to Z Frame for printing)<br />
*The cables get stuck underneath hinge when unfolding and they get stuck betwee de x endstop and the x carriage. <br />
*X- Carriage can only be printed with support and needs a lot of cleaning.<br />
*Dual extruder calibration.<br />
*Easier Assembly<br />
*Less different vitamins<br />
<br />
==Bill of Materials==<br />
I tried to use as much (industry) standard parts as possible so most parts can be bought at a lot of suppliers, the links are only an example. <br />
<br />
*Printed Parts <br />
*Lasercut Parts, birch plywood, 2,3 and 6 mm, cardboard<br />
*Electronics: [[RAMPS 1.4]]<br />
*Display: [[RepRapDiscount Smart Controller]]<br />
*Heated Bed: [[PCB Heatbed]] MK2A<br />
*Powersupply: 12V 30A 360W Switching Power Supply, dimensions 199*110*50mm [http://www.aliexprexx.com/item/New-12V-20A-240W-Switching-Power-Supply-for-LED-Strip-light-220V/631998397.html# Aliexpress] These powersupplies are a little bit smaller than before, maybe you need to move the holes in your lasercut YBottomBack and YBottomMiddle)<br />
*Steppermotors: 3pcs NEMA17 / 0.28Nm / 40mm length,and 3pcs NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pcs [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: [[GT2 Timing Belt]] 2pcs GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Endstops: Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops] or [[Hall-Θ]]<br />
*Lineair Bearings: 11 pcs Lm8uu 8x15x24mm, [[Linear bearing]]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [[Ball bearing]]<br />
*Power Inlet: [http://uk.farnell.com/schurter/6100-3300/inlet-iec-gsf/dp/1176790?Ntt=1176790# Farnell IEC c14 plug panel mount]<br />
*Switch: [http://uk.farnell.com/multicomp/mc36328-011-01/switch-spdt-4a-250vac-black/dp/9562265?Ntt=9562265# Farnell on/off Rocker Switch]<br />
*USB inlet: [http://www.ebay.de/itm/USB-2-0-Kabel-Verlangerung-B-Stecker-B-Einbaubuchse0-5m-/300910569128?pt=DE_Computing_USB_Kabel_Hubs_Adapter&hash=item460faae6a8# Ebay USB B extension panelmount]<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers<br />
*[[Kapton Tape]]<br />
*Glass 3mm 20x 20cm<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, Aliexpress links are blocked due to spam)</div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=109261Mowi printer2013-10-30T18:36:27Z<p>Mowi: </p>
<hr />
<div><br />
<br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = soon<br />
}}<br />
<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change. I also did some manual changes that are not reflected in the files yet.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 10<br />
*Lasercut parts: 21<br />
*Bought Parts: ???<br />
*Electronics: Ramps 1.4<br />
<br />
==Main Open Issues==<br />
*The printer is not yet stable enough for reliable printing when placed on an uneven surface. (Find a way to fixate Y box to Z Frame for printing)<br />
*The cables get stuck underneath hinge when unfolding and they get stuck betwee de x endstop and the x carriage. <br />
*X- Carriage can only be printed with support and needs a lot of cleaning.<br />
*Dual extruder calibration.<br />
*Easier Assembly<br />
*Less different vitamins<br />
<br />
==Bill of Materials==<br />
Most parts can be bought at a number of suppliers, the links are only an example. <br />
<br />
*Printed Parts <br />
*Lasercut Parts, birch plywood, 2,3 and 6 mm, cardboard<br />
*Electronics: Ramps 1.4<br />
*Display: [[RepRapDiscount Smart LCD Controller]]<br />
*Heated Bed: MK2B<br />
*Powersupply: 12V 30A 360W Switching Power Supply, dimensions 199*110*50mm [http://www.aliexprexx.com/item/New-12V-20A-240W-Switching-Power-Supply-for-LED-Strip-light-220V/631998397.html# Aliexpress] These powersupplies are a little bit smaller than before, maybe you need to move the holes in your lasercut YBottomBack and YBottomMiddle)<br />
*Steppermotors: 3pcs NEMA17 / 0.28Nm / 40mm length,and 3pcs NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pcs [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: 2pcs GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Endstops: Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops]<br />
*Lineair Bearings: 11 pcs Lm8uu 8x15x24mm, http://reprap.org/wiki/Linear_bearing# Linear Bearing]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [http://reprap.org/wiki/Ball_bearing# Ball Bearing]<br />
*Power Inlet<br />
*Switch<br />
*USB inlet: [http://www.ebay.de/itm/USB-2-0-Kabel-Verlangerung-B-Stecker-B-Einbaubuchse0-5m-/300910569128?pt=DE_Computing_USB_Kabel_Hubs_Adapter&hash=item460faae6a8# Ebay USB B extension panelmount]<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, Aliexpress links are blocked due to spam)</div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=109225Mowi printer2013-10-30T09:55:04Z<p>Mowi: added links to bill of materials</p>
<hr />
<div><br />
<br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = soon<br />
}}<br />
<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change. I also did some manual changes that are not reflected in the files yet.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 10<br />
*Lasercut parts: 21<br />
*Bought Parts: ???<br />
*Electronics: Ramps 1.4<br />
<br />
==Main Open Issues==<br />
*The printer is not yet stable enough for reliable printing when placed on an uneven surface. (Find a way to fixate Y box to Z Frame for printing)<br />
*The cables get stuck underneath hinge when unfolding and they get stuck betwee de x endstop and the x carriage. <br />
*X- Carriage can only be printed with support and needs a lot of cleaning.<br />
*Dual extruder calibration.<br />
*Easier Assembly<br />
*Less different vitamins<br />
<br />
==Bill of Materials==<br />
Most parts can be bought at a number of suppliers, the links are only an example. <br />
<br />
*Printed Parts <br />
*Lasercut Parts, birch plywood, 2,3 and 6 mm, cardboard<br />
*Electronics: Ramps 1.4<br />
*Display: [http://www.reprapdiscount.com/electronics/19-smart-lcd-controller.html# RepRapDiscount Smart LCD Controller]<br />
*Heated Bed: MK2B<br />
*Powersupply: 12V 30A 360W Switching Power Supply, dimensions 199*110*50mm [http://www.aliexprexx.com/item/New-12V-20A-240W-Switching-Power-Supply-for-LED-Strip-light-220V/631998397.html# Aliexpress] These powersupplies are a little bit smaller than before, maybe you need to move the holes in your lasercut YBottomBack and YBottomMiddle)<br />
*Steppermotors: 3pcs NEMA17 / 0.28Nm / 40mm length,and 3pcs NEMA17 / 0.4 Nm / 34mm length [http://reprap.org/wiki/NEMA_17_Stepper_motor# NEMA17]<br />
*Hotends: 2 pcs [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: 2pcs GT2-20Teeth, Ybelt < 800mm, XBelt < 700mm.<br />
*Endstops: Hall Endstops, e.g. [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops]<br />
*Lineair Bearings: 11 pcs Lm8uu 8x15x24mm, http://reprap.org/wiki/Linear_bearing# Linear Bearing]<br />
*Ball Bearings: 4 pcs 624ZZ 4x13x5mm, 2 Pcs 608ZZ 8x22x7mm [http://reprap.org/wiki/Ball_bearing# Ball Bearing]<br />
*Power Inlet<br />
*Switch<br />
*USB inlet: [http://www.ebay.de/itm/USB-2-0-Kabel-Verlangerung-B-Stecker-B-Einbaubuchse0-5m-/300910569128?pt=DE_Computing_USB_Kabel_Hubs_Adapter&hash=item460faae6a8# Ebay USB B extension panelmount]<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, Aliexpress links are blocked due to spam)</div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=109223Mowi printer2013-10-30T09:40:59Z<p>Mowi: added some parts and links</p>
<hr />
<div><br />
<br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = soon<br />
}}<br />
<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change. I also did some manual changes that are not reflected in the files yet.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 10<br />
*Lasercut parts: 21<br />
*Bought Parts: ???<br />
*Electronics: Ramps 1.4<br />
<br />
==Main Open Issues==<br />
*The printer is not yet stable enough for reliable printing when placed on an uneven surface. (Find a way to fixate Y box to Z Frame for printing)<br />
*The cables get stuck underneath hinge when unfolding and they get stuck betwee de x endstop and the x carriage. <br />
*X- Carriage can only be printed with support and needs a lot of cleaning.<br />
*Dual extruder calibration.<br />
*Easier Assembly<br />
*Less different vitamins<br />
<br />
==Bill of Materials==<br />
Most parts can be bought at a number of suppliers, the links are only an example. <br />
<br />
*Printed Parts <br />
*Lasercut Parts, birch plywood, 2,3 and 6 mm, cardboard<br />
*Electronics: Ramps 1.4<br />
*Display: [http://www.reprapdiscount.com/electronics/19-smart-lcd-controller.html# RepRapDiscount Smart LCD Controller]<br />
*Heated Bed: MK2B<br />
*Powersupply: 12V 30A 360W Switching Power Supply, dimensions 199*110*50mm [http://www.aliexprexx.com/item/New-12V-20A-240W-Switching-Power-Supply-for-LED-Strip-light-220V/631998397.html# Aliexpress] These powersupplies are a little bit smaller than before, maybe you have to adjust the mounting holes in your lasercut YBottomBack an Y Bottom middle)<br />
*Steppermotors: 3pcs NEMA17 / 0.28Nm / 40mm length,+ 3pcs NEMA17 / 0.4 Nm / 34mm length<br />
*Hotends: 2 pcs [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Extruder Gear: module 0,4 size 11x 11mm [http://www.aliexprexx.com/snapshot/254176141.html# Aliexpress Reprap Extrusion head special gear] <br />
*Pulleys and belts: GT2<br />
*Endstops: [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops]<br />
*Bearings: 11 pcs Lm8uu, 4 pcs 624ZZ<br />
*Power Inlet<br />
*Switch<br />
*USB inlet: [http://www.ebay.de/itm/USB-2-0-Kabel-Verlangerung-B-Stecker-B-Einbaubuchse0-5m-/300910569128?pt=DE_Computing_USB_Kabel_Hubs_Adapter&hash=item460faae6a8# Ebay USB B extension panelmount]<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Springs: 6 pcs<br />
*Assorted screws, nuts, bolts and washers<br />
<br />
------<br />
For aliexpress links, substitute the xx in the link for ss, Aliexpress links are blocked due to spam)</div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=108386Mowi printer2013-10-18T11:51:00Z<p>Mowi: </p>
<hr />
<div><br />
<br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = https://github.com/Mowi/MowiPrinter<br />
|url = soon<br />
}}<br />
<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change. I also did some manual changes that are not reflected in the files yet.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 10<br />
*Lasercut parts: 21<br />
*Bought Parts: ???<br />
*Electronics: Ramps 1.4<br />
<br />
==Main Open Issues==<br />
*The printer is not yet stable enough for reliable printing when placed on an uneven surface. (Find a way to fixate Y box to Z Frame for printing)<br />
*The cables get stuck underneath hinge when unfolding and they get stuck betwee de x endstop and the x carriage. <br />
*X- Carriage can only be printed with support and needs a lot of cleaning.<br />
*Dual extruder calibration.<br />
*Easier Assembly<br />
*Less different vitamins<br />
<br />
==Bill of Materials==<br />
Not complete<br />
<br />
*Printed Parts <br />
*Lasercut Parts, birch plywood, 2,3 and 6 mm, cardboard<br />
*Electronics: Ramps 1.4<br />
*Display: [http://www.reprapdiscount.com/electronics/19-smart-lcd-controller.html# RepRapDiscount Smart LCD Controller]<br />
*Heated Bed: MK2B<br />
*Powersupply: 12V 30A 360W Switching Power Supply, dimensions 199*98*50mm <br />
*Steppermotors: 3pcs NEMA17 / 0.28Nm / 40mm length, 3pcs NEMA17 / 0.4 Nm / 34mm length<br />
*Hotends: 2 pcs [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Pulleys and belts: GT2<br />
*Endstops: [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops]<br />
*Bearings: 11 pcs Lm8uu, 4 pcs 624ZZ<br />
*Power Inlet<br />
*Switch<br />
*USB inlet<br />
*Smooth Rods diameter 8mm, for X axis 2pcs 310mm,For Z axis 2pcs 352mm, for Y axis 2pcs 400mm. <br />
*Threaded rods 2 pcs M5 320mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Assorted screws, nuts, bolts and washers</div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=108184Mowi printer2013-10-17T11:43:53Z<p>Mowi: </p>
<hr />
<div><br />
<br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = soon<br />
|url = soon<br />
}}<br />
<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change. I also did some manual changes that are not reflected in the files yet.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 10<br />
*Lasercut parts: 21<br />
*Bought Parts: ???<br />
*Electronics: Ramps 1.4<br />
<br />
==Main Open Issues==<br />
*The printer is not yet stable enough for reliable printing when placed on an uneven surface. (Find a way to fixate Y box to Z Frame for printing)<br />
*The cables get stuck underneath hinge when unfolding and they get stuck betwee de x endstop and the x carriage. <br />
*X- Carriage can only be printed with support and needs a lot of cleaning.<br />
*Dual extruder calibration.<br />
*Easier Assembly<br />
*Less different vitamins<br />
<br />
==Bill of Materials==<br />
Not complete<br />
<br />
*Printed Parts <br />
*Lasercut Parts, birch plywood, 2,3 and 6 mm<br />
*Electronics: Ramps 1.4<br />
*Display: [http://www.reprapdiscount.com/electronics/19-smart-lcd-controller.html# RepRapDiscount Smart LCD Controller]<br />
*Heated Bed: MK2B<br />
*Powersupply: 12V 30A 360W Switching Power Supply, dimensions 199*98*50mm <br />
*Steppermotors: 3pcs NEMA17 / 0.28Nm / 40mm length, 3pcs NEMA17 / 0.4 Nm / 34mm length<br />
*Hotends: 2 pcs [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Pulleys and belts: GT2<br />
*Endstops: [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops]<br />
*Bearings: 11 pcs Lm8uu, 4 pcs 624ZZ<br />
*Power Inlet<br />
*Switch<br />
*USB inlet<br />
*Smooth Rods 8mm<br />
*Threaded rods 5mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Assorted screws, nuts, bolts and washers</div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=108183Mowi printer2013-10-17T11:41:14Z<p>Mowi: </p>
<hr />
<div><br />
<br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = soon<br />
|url = soon<br />
}}<br />
<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change. I also did some manual changes that are not reflected in the files yet.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 8<br />
*Lasercut parts: 21<br />
*Bought Parts: ???<br />
*Electronics: Ramps 1.4<br />
<br />
==Main Open Issues==<br />
*The printer is not yet stable enough for reliable printing when placed on an uneven surface. (Find a way to fixate Y box to Z Frame for printing)<br />
*The cables get stuck underneath hinge when unfolding and they get stuck betwee de x endstop and the x carriage. <br />
*X- Carriage can only be printed with support and needs a lot of cleaning.<br />
*Dual extruder calibration.<br />
*Easier Assembly<br />
*Less different vitamins<br />
<br />
==Bill of Materials==<br />
Not complete<br />
<br />
*Printed Parts <br />
*Lasercut Parts, birch plywood, 2,3 and 6 mm<br />
*Electronics: Ramps 1.4<br />
*Display: [http://www.reprapdiscount.com/electronics/19-smart-lcd-controller.html# RepRapDiscount Smart LCD Controller]<br />
*Heated Bed: MK2B<br />
*Powersupply: 12V 30A 360W Switching Power Supply, dimensions 199*98*50mm <br />
*Steppermotors: 3pcs NEMA17 / 0.28Nm / 40mm length, 3pcs NEMA17 / 0.4 Nm / 34mm length<br />
*Hotends: 2 pcs [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Pulleys and belts: GT2<br />
*Endstops: [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops]<br />
*Bearings: 11 pcs Lm8uu, 4 pcs 624ZZ<br />
*Power Inlet<br />
*Switch<br />
*USB inlet<br />
*Smooth Rods 8mm<br />
*Threaded rods 5mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Assorted screws, nuts, bolts and washers</div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=108182Mowi printer2013-10-17T11:38:25Z<p>Mowi: </p>
<hr />
<div><br />
{{RepRapNavigation|name=Mowi_printer}}<br />
<br />
{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = soon<br />
|url = soon<br />
}}<br />
<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change. I also did some manual changes that are not reflected in the files yet.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 8<br />
*Lasercut parts: 21<br />
*Bought Parts: ???<br />
*Electronics: Ramps 1.4<br />
<br />
==Main Open Issues==<br />
*The printer is not yet stable enough for reliable printing when placed on an uneven surface. (Find a way to fixate Y box to Z Frame for printing)<br />
*The cables get stuck underneath hinge when unfolding and they get stuck betwee de x endstop and the x carriage. <br />
*X- Carriage can only be printed with support and needs a lot of cleaning.<br />
*Dual extruder calibration.<br />
*Easier Assembly<br />
*Less different vitamins<br />
<br />
==Bill of Materials==<br />
Not complete<br />
<br />
*Printed Parts <br />
*Lasercut Parts, birch plywood, 2,3 and 6 mm<br />
*Electronics: Ramps 1.4<br />
*Display: [http://www.reprapdiscount.com/electronics/19-smart-lcd-controller.html# RepRapDiscount Smart LCD Controller]<br />
*Heated Bed: MK2B<br />
*Powersupply: 12V 30A 360W Switching Power Supply, dimensions 199*98*50mm <br />
*Steppermotors: 3pcs NEMA17 / 0.28Nm / 40mm length, 3pcs NEMA17 / 0.4 Nm / 34mm length<br />
*Hotends: 2 pcs [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Pulleys and belts: GT2<br />
*Endstops: [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops]<br />
*Bearings: 11 pcs Lm8uu, 4 pcs 624ZZ<br />
*Power Inlet<br />
*Switch<br />
*USB inlet<br />
*Smooth Rods 8mm<br />
*Threaded rods 5mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Assorted screws, nuts, bolts and washers</div>Mowihttps://reprap.org/mediawiki/index.php?title=Mowi_printer&diff=108181Mowi printer2013-10-17T11:33:29Z<p>Mowi: </p>
<hr />
<div>{{Development<br />
<!--Header--><br />
|name = Mowi Printer<br />
|status = experimental<br />
<!--Image--><br />
|image = Mowi_Printer.jpg<br />
<!--General--><br />
|description = The Mowiprinter is a foldable 3d printer with dualextrusion and a building volume of 260 x 200 x 195mm.<br />
|license = GPLv3<br />
|author = mowi<br />
|reprap = Prusa Mendel<br />
|categories = Foldable RepRap, Development<br />
|cadModel = soon<br />
|url = soon<br />
}}<br />
<br />
==Introduction==<br />
The Mowi Printer is a foldable 3d printer, folded flat it is small, but opened up it can print big and with two materials. It also has a display for standalone printing.<br />
The Mowi printer is still under development so expect the files to change. I also did some manual changes that are not reflected in the files yet.<br />
<br />
==Specifications==<br />
*Printing Size: 260mm x 200mm x 195mm<br />
*Folded size: 400mm x 330mm x 86mm<br />
*Printed Parts: 8<br />
*Lasercut parts: 21<br />
*Bought Parts: ???<br />
*Electronics: Ramps 1.4<br />
<br />
==Main Open Issues==<br />
*The printer is not yet stable enough for reliable printing when placed on an uneven surface. (Find a way to fixate Y box to Z Frame for printing)<br />
*The cables get stuck underneath hinge when unfolding and they get stuck betwee de x endstop and the x carriage. <br />
*X- Carriage can only be printed with support and needs a lot of cleaning.<br />
*Dual extruder calibration.<br />
*Easier Assembly<br />
*Less different vitamins<br />
<br />
==Bill of Materials==<br />
Not complete<br />
<br />
*Printed Parts <br />
*Lasercut Parts, birch plywood, 2,3 and 6 mm<br />
*Electronics: Ramps 1.4<br />
*Display: [http://www.reprapdiscount.com/electronics/19-smart-lcd-controller.html# RepRapDiscount Smart LCD Controller]<br />
*Heated Bed: MK2B<br />
*Powersupply: 12V 30A 360W Switching Power Supply, dimensions 199*98*50mm <br />
*Steppermotors: 3pcs NEMA17 / 0.28Nm / 40mm length, 3pcs NEMA17 / 0.4 Nm / 34mm length<br />
*Hotends: 2 pcs [http://www.reprap.cc//index.php?main_page=product_info&cPath=6&products_id=77&language=en reprap.cc Hotend 0,35 mm fully assembled for 1,75mm filament]<br />
*Pulleys and belts: GT2<br />
*Endstops: [http://www.reprapdiscount.com/electronics/18-set-hall-endstops3-pieces.html# RepRapDiscount hallendstops]<br />
*Bearings: 11 pcs Lm8uu, 4 pcs 624ZZ<br />
*Power Inlet<br />
*Switch<br />
*USB inlet<br />
*Smooth Rods 8mm<br />
*Threaded rods 5mm<br />
*Woodscrews Countersunk Sp 2,5 x 20<br />
*Assorted screws, nuts, bolts and washers</div>Mowi