https://reprap.org/mediawiki/api.php?action=feedcontributions&user=Lokus77&feedformat=atom
RepRap - User contributions [en]
2024-03-29T06:16:28Z
User contributions
MediaWiki 1.30.0
https://reprap.org/mediawiki/index.php?title=Clone_Wars:_Impresora_Stryper&diff=121667
Clone Wars: Impresora Stryper
2014-04-02T09:05:19Z
<p>Lokus77: /* Mejoras Impresas / Diseñadas */</p>
<hr />
<div><center><br />
== '''Prusa I3 STRYPER''' ==<br />
[[File:Stryper.jpg|Stryper.jpg]]<br />
</center><br />
<br />
'''Impresora Prusa iteración 3 completa en Negro y Amarillo.''' <br />
Bautizada como Stryper en honor al grupo de Glam / Hard rock americano [http://www.stryper.com/ Stryper] *<br />
<br />
(* Aunque hagan hard rock cristiano y sean unos putos moñas , SI, me gustan, ¡qué pasa!)<br />
<br />
<br />
<br />
'''Premisas:'''<br />
<br />
1.- Montar la impresora con poco dinero. Se han utilizado los componentes más económicos encontrados (cumpliendo la premisa inferior), excepto en el hotend, que se ha preferido invertir más dinero en un Allmetal.<br />
<br />
2.- Para el montaje de la impresora, si existe un componente en negro o en amarillo, se monta.<br />
<br />
Si no existe,'''¡se pinta!''' (Excepto que sea necesariamente de otro color, como las varillas color metal, etc.)<br />
<br />
La idea es que todo sea negro o amarillo, si algún componente plástico es de otro color, es un objeto en pruebas/evolución/mejora.<br />
<br />
3.- Los motores de 2.5A apestan, están mal dimensionados. Se buscaban motores del máximo torque posible comprados en españa, de máximo 1.7A.<br />
<br />
<br />
== Ficha ==<br />
{| class="wikitable" style="width:100%"<br />
|- <br />
| <center>[[File:I3_stryper.jpg|thumb|Impresora Stryper.]]</center><br />
|<br />
* '''Nombre''': '''<font color="#000000">Stryper</font>'''<br />
* '''Autor''': '''[http://www.reprap.org/wiki/User:Lokus77 LoKuS77]'''<br />
* '''Rango''': Jedi <br />
* '''Familia''': [[Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame |Prusa Mendel Iteration 3]]<br />
* '''Generación''': 7<br />
* '''Material''': Plástico ABS Amarillo. Metacrilato negro 10mm.<br />
* '''Color''': Negro / Amarillo<br />
* '''Electrónica''': [[RAMPS|RAMPS 1.4]]<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Gregs-Jonaskuehling V4<br />
* '''Hot-End''': E3D-v5 3mm<br />
* '''Nacimiento''': 10/02/2014<br />
* '''Impresora Progenitora''': Madre:baru (Sin inscribir), Abuela: jester (Sin inscribir), Bisabuelas: #39, #134,#90<br />
* '''Hijos''': Sin descendencia (por ahora)<br />
* '''Imágenes ''': [https://plus.google.com/photos/118042097759435445983/albums/5986890523351025217 Galería Fotos Google+]<br />
| <center></center><br />
|}<br />
<br />
== Cronología ==<br />
* '''28/08/2013''' - Inicio del proyecto.<br />
* Se va pidiendo el material, va llegando...<br />
* '''31/01/2014''' - Llegan los motores. Era lo último imprescindible para funcionar. Ya se puede terminar el montaje!!<br />
* '''01/02/2014''' - Compramos primer rollo de ABS<br />
* '''02/02/2014''' - Primeras pruebas impresión. '''Cubo calibración calidad pasable'''. Monedas calibración y demás pruebas<br />
* '''10/02/2014''' - Se considera impresora como "viva". :) Mejoras en curso....<br />
<br />
== Compras de material ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Compra'''<br />
| '''Material'''<br />
| '''Comprado en'''<br />
| '''Precio(portes incluídos)'''<br />
| '''Observaciones'''<br />
|-<br />
|''' SEPTIEMBRE'''<br />
|-<br />
| 03/09/2013<br />
| 10 Rodamientos LM8UU <br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 10€<br />
|-<br />
| 03/09/2013<br />
| 2 Rodamientos 623ZZ10 <br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 1€<br />
|-<br />
| 03/09/2013<br />
| Kit Tornilleria Prusa I3 single frame (Con muelles M3)<br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 10€<br />
| [http://www.imprimiendoen3d.es/index.php?id_product=17&controller=product&id_lang=1 enlace]<br />
|-<br />
| 03/09/2013<br />
| KIT VARILLAS ROSCADAS Y LISAS PRUSA I3 SINGLE FRAME<br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 22€<br />
| [http://www.imprimiendoen3d.es/index.php?id_product=20&controller=product&id_lang=1 enlace]<br />
|-<br />
| 03/09/2013<br />
| Marco Metacrilato 10mm Negro<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 40+7€<br />
|[https://11094530530805020601.googlegroups.com/attach/22e38efead88a7d6/marcoNegro.jpg?view=1&part=5 Foto]<br />
|-<br />
| 03/09/2013<br />
| 2 Poleas T2.5<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 4€<br />
|-<br />
| 03/09/2013<br />
| 2 Termistores cama Epcos 100k<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Kit piezas amarillas by Baru<br />
| Baru<br />
| Donación <br />
| [https://lh4.googleusercontent.com/-8wo9FfWgBGo/Ui5NldSUwtI/AAAAAAABLkQ/LvINckJW4K0/w927-h696-no/2013-09-09 foto]<br />
|-<br />
| 10/09/2013<br />
| Correa GT2.5 2x1m<br />
| Baru<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Espejo Ikea 20x20<br />
| Baru<br />
| Regalo<br />
|-<br />
|'''NOVIEMBRE'''<br />
|-<br />
| 07/11/2013<br />
| Hobbed Bolt M8<br />
| [http://www.ebay.es/usr/jesmar_zgz Jesmar_Zgz (ebay)]<br />
| 5,5€<br />
| [http://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/xi8AAOxyKsZRr0to/$T2eC16R,!ykE9s7t%29d!SBRr0tn3vLw~~60_57.JPG Foto]<br />
|-<br />
| 07/11/2013<br />
| Arduino SainSmart Mega2560 R3 '''Negro'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 13,7€<br />
| [http://www.ebay.es/itm/SainSmart-Mega2560-R3-ATmega2560-16AU-ATMEGA16U2-USB-Cable-For-Arduino-2013-/271187169712 enlace]<br />
|-<br />
| 07/11/2013<br />
| Heatbed SainSmart MK2B '''Negra'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 12,9€<br />
| [http://www.ebay.com/itm/SainSmart-MK2B-Heat-Bed-Heatbed-Hot-Plate-For-RepRap-Mendel-Prusa-3D-Printer-/121171627059 enlace]<br />
|-<br />
| 07/11/2013<br />
| Ramps 1.4<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 11,6€<br />
| [http://www.ebay.es/itm/3D-Printer-Controller-for-RAMPS-1-4-REPRAP-MENDEL-PRUSA-for-Arduino-/310699832639 enlace]<br />
|-<br />
| 07/11/2013<br />
| [http://i.ebayimg.com/00/s/NTk4WDYwMw==/z/GPQAAOxyrxZR2o5V/$%28KGrHqF,!ocFG6JtsySfBR2o5U6vnQ~~60_12.JPG 5 StepStick A4988 3D]<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 14,4€<br />
| [http://www.ebay.es/itm/5PCS-StepStick-Stepper-motor-driver-A4988-3D-Printer-driver-module-Reprap-Prus-/400525154696 enlace]<br />
|-<br />
| 07/11/2013<br />
| [https://lh6.googleusercontent.com/-2wXcZWexoec/UqZlmrQtoaI/AAAAAAAAFz0/786ZDUn-17U/w927-h696-no/DSCN0167.JPG 3 Endstops Mecánico con Led]<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 8€<br />
| [http://www.ebay.es/itm/Mech-Endstop-Switch-Kit-for-CNC-3D-Printer-RepRap-Makerbot-Prusa-Mendel-RAMPS1-4-/200950337317 enlace]<br />
|-<br />
| 07/11/2013<br />
| 10 tiras de 40 pines<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 1,2€<br />
| [http://www.ebay.es/itm/10PCS-40Pin-2-54mm-Single-Row-Straight-Male-Pin-Header-Strip-PBC-Ardunio-/180974247480 enlace]<br />
|-<br />
| 07/11/2013<br />
| 40 cables dupont de 20cm<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 1,6€<br />
| [http://www.ebay.es/itm/40PCS-Dupont-wire-jumpercables-20cm-2-54MM-male-to-female-1P-1P-For-Arduino-/181011986500 enlace]<br />
|-<br />
| 26/11/2013<br />
| Calibre Digital chino<br />
| [http://www.ebay.com/usr/hkiron-my Hkyron-my (ebay)]<br />
| 7,7€<br />
| [http://www.ebay.com/itm/Electric-6-Stainless-Steel-Digital-Vernier-Dial-Caliper-Gauge-Micro-Meter-GOOD-/290897280812 enlace]<br />
|-<br />
| 28/11/2013<br />
| Pegamento térmico disipadores<br />
| [http://www.ebay.es/usr/qqlinkys2009 qqlinkys2009 (ebay)]<br />
| 1€<br />
| [http://www.ebay.es/itm/Grasa-de-Silicona-Thermal-Compound-Glue-Heatsink-Plaster-STARS-922-para-CPU-GPU-/291093278661 enlace]<br />
|-<br />
|FOTO ELECTRONICA<br />
|[https://lh4.googleusercontent.com/-YESqsEQPlMI/UqZiY8DWwzI/AAAAAAAAFxI/Q-_juGrK4rc/w927-h696-no/DSCN0138.JPG Pedido Ebay China Electrónica]<br />
|-<br />
| 29/11/2013<br />
| Hotend E3D V5 3mm Direct Extrusion<br />
| [http://e3d-online.com/E3D-HotEnds/E3D-DirectFeed-HotEnds/E3D-V5-3mm-Direct-All-Metal-HotEnd E3D-Online]<br />
| 68€ (57£)<br />
| [https://lh5.googleusercontent.com/-JOd7ZUCCD6M/UqZkr_2DpwI/AAAAAAAAFyg/18sSCYtIhBM/w927-h696-no/DSCN0154.JPG Foto]<br />
|-<br />
|'''ENERO'''<br />
|-<br />
| 26/01/2014<br />
| [https://lh3.googleusercontent.com/-Tby4Im_MRW4/UwHygr-8-uI/AAAAAAAAGPA/UiGzL8tT9aI/w881-h647-no/motores2.jpg 5 X Motor '''TB42HT47-1684AC''' Nema17 Torque 4.4kg/cm, 1.68A]<br />
| [http://store.thingibox.com/es/motores/27-stepper_nema17.html#/tipo-un_eje_p_n_tb42ht47_1684ac Thingibox]<br />
| 70€ (65+5)<br />
| Cable 70cm. Incluye conectores<br />
|-<br />
|'''FEBRERO'''<br />
|-<br />
| 04/02/2014<br />
| Grasa de Litio (500gr)<br />
| Amazon<br />
| 7,5€<br />
| [http://www.amazon.es/dp/B002E2QM6S Enlace]<br />
|-<br />
| 25/02/2014<br />
| 2 acopladores flexibles 5x5mm<br />
| José Castrillo (Clone wars) albazetech3d@gmail.com<br />
| 6€ (2x 2.5€ + 1€ correos)<br />
|-<br />
|'''MARZO'''<br />
|-<br />
| 08/03/2014<br />
| Cinta Kapton 24mm Rollo 33metros<br />
| DX Dealextreme<br />
| 3,77€<br />
| [http://dx.com/es/p/polyimide-heat-resistant-high-temperature-adhesive-tape-24mm-33m-260-c-21359 Enlace]<br />
|-<br />
| 08/03/2014<br />
| Destornillador cerámico precisión<br />
| DX Dealextreme<br />
| 1,4€<br />
| [http://dx.com/es/p/weitus-pro-ceramic-aligner-tool-6538 Enlace]<br />
|-<br />
| 08/03/2014<br />
| Multímetro decente, [https://www.youtube.com/watch?v=3y5wjaNusr0 Vichy-VC99] (Clon chino Fluke)<br />
| DX Dealextreme<br />
| 27€<br />
| [http://dx.com/es/p/3-0-lcd-handheld-digital-multimeter-voltage-current-resistance-temperature-2-aaa-37082 Enlace]<br />
|-<br />
| 08/03/2014<br />
| Maya de nylon negra trenzada, manguito 6mm, 15 metros<br />
| DX Dealextreme<br />
| 6,20€<br />
| [http://www.dx.com/es/p/diy-pet-braided-6mm-cable-management-sleeving-black-1530cm-202845 Enlace]<br />
|-<br />
| 18/03/2014<br />
| Maya de nylon amarilla trenzada, manguito 4mm, 5 metros<br />
| Ebay UK<br />
| 5€<br />
| [http://www.ebay.es/itm/181242472964 Enlace]<br />
|-<br />
| 16/03/2014<br />
| Geetech Smart controller LCD12864 Version (LED turn on control) [https://lh5.googleusercontent.com/-it3o4S0D5F8/UznVkFIiHMI/AAAAAAAAJIw/lCv4Zr9T16I/w927-h521-no/IMG_20140331_224511603.JPG FOTO1] [https://lh5.googleusercontent.com/-x5KVLjF9hxE/UznVkoIG4CI/AAAAAAAAJI0/2TKkD17dsF4/w927-h521-no/IMG_20140331_224519522_HDR+%25281%2529.jpg FOTO2]<br />
| geeetech.com<br />
| 26€ (oferta finde)Tb. Disponible 21€ [http://www.ebay.es/itm/Smart-controller-12864-LCD-Display-control-adapte-FOR-3D-Printer-RepRap-MendeLl-/291041498158 Ebay]<br />
| [http://www.geeetech.com/ramps14-smart-controller-lcd12864-version-led-turn-on-control-p-690.html Enlace]<br />
|-<br />
| 20/03/2014<br />
| Tira de leds blancos 3528, 60 leds, 1 metro [https://lh3.googleusercontent.com/-qkuu3mv9a8U/UzpcKskSYwI/AAAAAAAAJOA/-mJPFM1TPKo/w927-h696-no/DSCN5048.JPG FOTO ]<br />
| Ebay españa<br />
| 3,7€<br />
| [http://www.ebay.es/itm/261415313444 Enlace]<br />
|-<br />
| 20/03/2014<br />
| Servo 9G TOWER PRO SG90 <br />
| Ebay españa<br />
| 5,9€<br />
| [http://www.ebay.es/itm/321334988386 Enlace]<br />
|}<br />
<br />
'''LISTADO COMPLETO GOOGLE DOCS'''<br />
<br />
[https://docs.google.com/spreadsheet/ccc?key=0Av_gWNbO_3opdDE0UzRCTnY0VTUtUmdrT1BhYk5qNGc#gid=0 Listado Google DOCS con enlaces y precios]<br />
<br />
<br />
'''Materiales no comprados (reciclados, etc)'''<br />
<br />
- 3x Rodamiento 608ZZ Abec 7 (Patines)<br />
<br />
- 1x Fuente alimentacion 500W ATX (12V- 28A)<br />
<br />
- 1x Ventilador 40x40mm<br />
<br />
- 1x Ventilador 60x60mm<br />
<br />
- 1x Ventilador 80x80mm<br />
<br />
- 1x Disipador memoria RAM [http://www.guru3d.com/miraserver/images/2009/decade-guru3d/IMG_7078.jpg Hercules GeForce 2 GTS] Partido en trozos para los pololu: [https://lh6.googleusercontent.com/-5eVavMqxExQ/UyArq_JF3pI/AAAAAAAAG5M/zu0y_CLpGGo/w839-h518-no/disipas.jpg Foto Resultado]<br />
<br />
<br />
Última Edición fecha: '''31-03-2014'''<br />
<center>[[File:Stryper-Guitars-Miniature.jpg]]</center><br />
<br />
== '''Mejoras Impresas / Diseñadas''' ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Pieza'''<br />
| '''Material'''<br />
| '''Impreso'''<br />
| '''Diseño propio'''<br />
| '''Tinkerkad'''<br />
| '''Thingverse'''<br />
| '''Observaciones'''<br />
|-<br />
|Tapa Skull para engranage grande<br />
[[File:Skull_gear_lokus.jpg|Tapa calavera engranage grande]]<br />
| ABS plateado<br />
| SI<br />
| SI, '''remix''' desde [http://www.thingiverse.com/thing:49220 Skulltruder]<br />
|[https://tinkercad.com/things/8fBhMLMNT1R-tapa-para-gear '''Enlace''']<br />
|[http://www.thingiverse.com/thing:258657 '''Enlace''']<br />
| Necesario limar, impresa con soportes.<br />
|-<br />
|Estabilizador eje Z prusa i3<br />
[[File:Stryper Mejora Marco.jpg|300px|Estabilizador eje Z prusa i3]]<br />
| ABS Amararillo<br />
| SI<br />
| NO<br />
|<br />
|[http://www.thingiverse.com/thing:100128 Enlace]<br />
| Requiere varillas traseras más largas. Agrega infinita estabilidad <br />
|<br />
|-<br />
|Sujección LM8uu a cama<br />
| ABS Amararillo<br />
| SI<br />
| NO<br />
|<br />
|[http://www.thingiverse.com/thing:57770 Enlace]<br />
| Puede requerir editar la separación de los agujeros <br />
|<br />
|-<br />
|Logo Stryper<br />
[[File:Stryper display large.jpg|300px|Logo Stryper (Mejora visual)]]<br />
| ABS Amararillo<br />
| SI<br />
| SI (vectorizado desde jpg)<br />
|[https://tinkercad.com/things/fJ0ElN03bw9-stryper-logo enlace]<br />
|[http://www.thingiverse.com/thing:262879 Enlace]<br />
| mejora '''visual''' (cero utilidad, solo alegrar el ojo)<br />
|<br />
|-<br />
|Adaptador hotend E3D Fan40mm + brida<br />
[[File:E3D 40mm.jpg|300px|Adaptador hotend E3D Fan40mm + brida]]<br />
| ABS azul<br />
| SI<br />
| SI, remix <br />
|[https://tinkercad.com/things/b9qiHDtoILL-hotend-e3d-v5-apano-ventiladores-40mm-y-sujeccion-brida '''Enlace''']<br />
|[http://www.thingiverse.com/thing:251563 '''Enlace''']<br />
| Puede usarse con un ventilador de 60mm añadiendo un adaptador adicional. <br />
|-<br />
| '''Sujección integral Jonas-E3D Fan40mm'''<br />
[[File:lokusE3d_01.jpg|300px|Sujección integral Jonas-E3D Fan40mm]]<br />
| ABS <br />
| EN CURSO<br />
| SI, remix de 3 o 4<br />
|EN BREVE<br />
|EN BREVE<br />
| Creada para evitar el balanceo del hotend en el eje Y . Proporciona una sujección mayor al extrusor.<br />
<br />
La sujección tradicional al final tenía juego, y termina moviéndose unos mm en algunas impresiones.<br />
<br />
Evita que se pueda mover unos mm con la mano el hotend hacia delante y atrás.<br />
|}<br />
[[File:lokusE3d_02.jpg|300px|Sujección integral Jonas-E3D Fan40mm]]<br />
[[File:lokusE3d_03.jpg|300px|Sujección integral Jonas-E3D Fan40mm]]<br />
<br />
<br />
[https://lh4.googleusercontent.com/-2iaoXwt0Yao/UzpcMslTK5I/AAAAAAAAJO8/Jj0XtS5uFn0/w927-h696-no/DSCN5055.JPG Work In Progress FOTO1]<br />
<br />
[https://lh5.googleusercontent.com/-FKHEQSL4xPc/UzpcMGYO6qI/AAAAAAAAJOs/Nu1UevhSCy0/w827-h813-no/DSCN5053.JPG Work In Progress FOTO2]<br />
[[Category:Clone wars]]</div>
Lokus77
https://reprap.org/mediawiki/index.php?title=Clone_Wars:_Impresora_Stryper&diff=121666
Clone Wars: Impresora Stryper
2014-04-02T08:58:10Z
<p>Lokus77: /* Compras de material */</p>
<hr />
<div><center><br />
== '''Prusa I3 STRYPER''' ==<br />
[[File:Stryper.jpg|Stryper.jpg]]<br />
</center><br />
<br />
'''Impresora Prusa iteración 3 completa en Negro y Amarillo.''' <br />
Bautizada como Stryper en honor al grupo de Glam / Hard rock americano [http://www.stryper.com/ Stryper] *<br />
<br />
(* Aunque hagan hard rock cristiano y sean unos putos moñas , SI, me gustan, ¡qué pasa!)<br />
<br />
<br />
<br />
'''Premisas:'''<br />
<br />
1.- Montar la impresora con poco dinero. Se han utilizado los componentes más económicos encontrados (cumpliendo la premisa inferior), excepto en el hotend, que se ha preferido invertir más dinero en un Allmetal.<br />
<br />
2.- Para el montaje de la impresora, si existe un componente en negro o en amarillo, se monta.<br />
<br />
Si no existe,'''¡se pinta!''' (Excepto que sea necesariamente de otro color, como las varillas color metal, etc.)<br />
<br />
La idea es que todo sea negro o amarillo, si algún componente plástico es de otro color, es un objeto en pruebas/evolución/mejora.<br />
<br />
3.- Los motores de 2.5A apestan, están mal dimensionados. Se buscaban motores del máximo torque posible comprados en españa, de máximo 1.7A.<br />
<br />
<br />
== Ficha ==<br />
{| class="wikitable" style="width:100%"<br />
|- <br />
| <center>[[File:I3_stryper.jpg|thumb|Impresora Stryper.]]</center><br />
|<br />
* '''Nombre''': '''<font color="#000000">Stryper</font>'''<br />
* '''Autor''': '''[http://www.reprap.org/wiki/User:Lokus77 LoKuS77]'''<br />
* '''Rango''': Jedi <br />
* '''Familia''': [[Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame |Prusa Mendel Iteration 3]]<br />
* '''Generación''': 7<br />
* '''Material''': Plástico ABS Amarillo. Metacrilato negro 10mm.<br />
* '''Color''': Negro / Amarillo<br />
* '''Electrónica''': [[RAMPS|RAMPS 1.4]]<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Gregs-Jonaskuehling V4<br />
* '''Hot-End''': E3D-v5 3mm<br />
* '''Nacimiento''': 10/02/2014<br />
* '''Impresora Progenitora''': Madre:baru (Sin inscribir), Abuela: jester (Sin inscribir), Bisabuelas: #39, #134,#90<br />
* '''Hijos''': Sin descendencia (por ahora)<br />
* '''Imágenes ''': [https://plus.google.com/photos/118042097759435445983/albums/5986890523351025217 Galería Fotos Google+]<br />
| <center></center><br />
|}<br />
<br />
== Cronología ==<br />
* '''28/08/2013''' - Inicio del proyecto.<br />
* Se va pidiendo el material, va llegando...<br />
* '''31/01/2014''' - Llegan los motores. Era lo último imprescindible para funcionar. Ya se puede terminar el montaje!!<br />
* '''01/02/2014''' - Compramos primer rollo de ABS<br />
* '''02/02/2014''' - Primeras pruebas impresión. '''Cubo calibración calidad pasable'''. Monedas calibración y demás pruebas<br />
* '''10/02/2014''' - Se considera impresora como "viva". :) Mejoras en curso....<br />
<br />
== Compras de material ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Compra'''<br />
| '''Material'''<br />
| '''Comprado en'''<br />
| '''Precio(portes incluídos)'''<br />
| '''Observaciones'''<br />
|-<br />
|''' SEPTIEMBRE'''<br />
|-<br />
| 03/09/2013<br />
| 10 Rodamientos LM8UU <br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 10€<br />
|-<br />
| 03/09/2013<br />
| 2 Rodamientos 623ZZ10 <br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 1€<br />
|-<br />
| 03/09/2013<br />
| Kit Tornilleria Prusa I3 single frame (Con muelles M3)<br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 10€<br />
| [http://www.imprimiendoen3d.es/index.php?id_product=17&controller=product&id_lang=1 enlace]<br />
|-<br />
| 03/09/2013<br />
| KIT VARILLAS ROSCADAS Y LISAS PRUSA I3 SINGLE FRAME<br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 22€<br />
| [http://www.imprimiendoen3d.es/index.php?id_product=20&controller=product&id_lang=1 enlace]<br />
|-<br />
| 03/09/2013<br />
| Marco Metacrilato 10mm Negro<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 40+7€<br />
|[https://11094530530805020601.googlegroups.com/attach/22e38efead88a7d6/marcoNegro.jpg?view=1&part=5 Foto]<br />
|-<br />
| 03/09/2013<br />
| 2 Poleas T2.5<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 4€<br />
|-<br />
| 03/09/2013<br />
| 2 Termistores cama Epcos 100k<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Kit piezas amarillas by Baru<br />
| Baru<br />
| Donación <br />
| [https://lh4.googleusercontent.com/-8wo9FfWgBGo/Ui5NldSUwtI/AAAAAAABLkQ/LvINckJW4K0/w927-h696-no/2013-09-09 foto]<br />
|-<br />
| 10/09/2013<br />
| Correa GT2.5 2x1m<br />
| Baru<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Espejo Ikea 20x20<br />
| Baru<br />
| Regalo<br />
|-<br />
|'''NOVIEMBRE'''<br />
|-<br />
| 07/11/2013<br />
| Hobbed Bolt M8<br />
| [http://www.ebay.es/usr/jesmar_zgz Jesmar_Zgz (ebay)]<br />
| 5,5€<br />
| [http://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/xi8AAOxyKsZRr0to/$T2eC16R,!ykE9s7t%29d!SBRr0tn3vLw~~60_57.JPG Foto]<br />
|-<br />
| 07/11/2013<br />
| Arduino SainSmart Mega2560 R3 '''Negro'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 13,7€<br />
| [http://www.ebay.es/itm/SainSmart-Mega2560-R3-ATmega2560-16AU-ATMEGA16U2-USB-Cable-For-Arduino-2013-/271187169712 enlace]<br />
|-<br />
| 07/11/2013<br />
| Heatbed SainSmart MK2B '''Negra'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 12,9€<br />
| [http://www.ebay.com/itm/SainSmart-MK2B-Heat-Bed-Heatbed-Hot-Plate-For-RepRap-Mendel-Prusa-3D-Printer-/121171627059 enlace]<br />
|-<br />
| 07/11/2013<br />
| Ramps 1.4<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 11,6€<br />
| [http://www.ebay.es/itm/3D-Printer-Controller-for-RAMPS-1-4-REPRAP-MENDEL-PRUSA-for-Arduino-/310699832639 enlace]<br />
|-<br />
| 07/11/2013<br />
| [http://i.ebayimg.com/00/s/NTk4WDYwMw==/z/GPQAAOxyrxZR2o5V/$%28KGrHqF,!ocFG6JtsySfBR2o5U6vnQ~~60_12.JPG 5 StepStick A4988 3D]<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 14,4€<br />
| [http://www.ebay.es/itm/5PCS-StepStick-Stepper-motor-driver-A4988-3D-Printer-driver-module-Reprap-Prus-/400525154696 enlace]<br />
|-<br />
| 07/11/2013<br />
| [https://lh6.googleusercontent.com/-2wXcZWexoec/UqZlmrQtoaI/AAAAAAAAFz0/786ZDUn-17U/w927-h696-no/DSCN0167.JPG 3 Endstops Mecánico con Led]<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 8€<br />
| [http://www.ebay.es/itm/Mech-Endstop-Switch-Kit-for-CNC-3D-Printer-RepRap-Makerbot-Prusa-Mendel-RAMPS1-4-/200950337317 enlace]<br />
|-<br />
| 07/11/2013<br />
| 10 tiras de 40 pines<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 1,2€<br />
| [http://www.ebay.es/itm/10PCS-40Pin-2-54mm-Single-Row-Straight-Male-Pin-Header-Strip-PBC-Ardunio-/180974247480 enlace]<br />
|-<br />
| 07/11/2013<br />
| 40 cables dupont de 20cm<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 1,6€<br />
| [http://www.ebay.es/itm/40PCS-Dupont-wire-jumpercables-20cm-2-54MM-male-to-female-1P-1P-For-Arduino-/181011986500 enlace]<br />
|-<br />
| 26/11/2013<br />
| Calibre Digital chino<br />
| [http://www.ebay.com/usr/hkiron-my Hkyron-my (ebay)]<br />
| 7,7€<br />
| [http://www.ebay.com/itm/Electric-6-Stainless-Steel-Digital-Vernier-Dial-Caliper-Gauge-Micro-Meter-GOOD-/290897280812 enlace]<br />
|-<br />
| 28/11/2013<br />
| Pegamento térmico disipadores<br />
| [http://www.ebay.es/usr/qqlinkys2009 qqlinkys2009 (ebay)]<br />
| 1€<br />
| [http://www.ebay.es/itm/Grasa-de-Silicona-Thermal-Compound-Glue-Heatsink-Plaster-STARS-922-para-CPU-GPU-/291093278661 enlace]<br />
|-<br />
|FOTO ELECTRONICA<br />
|[https://lh4.googleusercontent.com/-YESqsEQPlMI/UqZiY8DWwzI/AAAAAAAAFxI/Q-_juGrK4rc/w927-h696-no/DSCN0138.JPG Pedido Ebay China Electrónica]<br />
|-<br />
| 29/11/2013<br />
| Hotend E3D V5 3mm Direct Extrusion<br />
| [http://e3d-online.com/E3D-HotEnds/E3D-DirectFeed-HotEnds/E3D-V5-3mm-Direct-All-Metal-HotEnd E3D-Online]<br />
| 68€ (57£)<br />
| [https://lh5.googleusercontent.com/-JOd7ZUCCD6M/UqZkr_2DpwI/AAAAAAAAFyg/18sSCYtIhBM/w927-h696-no/DSCN0154.JPG Foto]<br />
|-<br />
|'''ENERO'''<br />
|-<br />
| 26/01/2014<br />
| [https://lh3.googleusercontent.com/-Tby4Im_MRW4/UwHygr-8-uI/AAAAAAAAGPA/UiGzL8tT9aI/w881-h647-no/motores2.jpg 5 X Motor '''TB42HT47-1684AC''' Nema17 Torque 4.4kg/cm, 1.68A]<br />
| [http://store.thingibox.com/es/motores/27-stepper_nema17.html#/tipo-un_eje_p_n_tb42ht47_1684ac Thingibox]<br />
| 70€ (65+5)<br />
| Cable 70cm. Incluye conectores<br />
|-<br />
|'''FEBRERO'''<br />
|-<br />
| 04/02/2014<br />
| Grasa de Litio (500gr)<br />
| Amazon<br />
| 7,5€<br />
| [http://www.amazon.es/dp/B002E2QM6S Enlace]<br />
|-<br />
| 25/02/2014<br />
| 2 acopladores flexibles 5x5mm<br />
| José Castrillo (Clone wars) albazetech3d@gmail.com<br />
| 6€ (2x 2.5€ + 1€ correos)<br />
|-<br />
|'''MARZO'''<br />
|-<br />
| 08/03/2014<br />
| Cinta Kapton 24mm Rollo 33metros<br />
| DX Dealextreme<br />
| 3,77€<br />
| [http://dx.com/es/p/polyimide-heat-resistant-high-temperature-adhesive-tape-24mm-33m-260-c-21359 Enlace]<br />
|-<br />
| 08/03/2014<br />
| Destornillador cerámico precisión<br />
| DX Dealextreme<br />
| 1,4€<br />
| [http://dx.com/es/p/weitus-pro-ceramic-aligner-tool-6538 Enlace]<br />
|-<br />
| 08/03/2014<br />
| Multímetro decente, [https://www.youtube.com/watch?v=3y5wjaNusr0 Vichy-VC99] (Clon chino Fluke)<br />
| DX Dealextreme<br />
| 27€<br />
| [http://dx.com/es/p/3-0-lcd-handheld-digital-multimeter-voltage-current-resistance-temperature-2-aaa-37082 Enlace]<br />
|-<br />
| 08/03/2014<br />
| Maya de nylon negra trenzada, manguito 6mm, 15 metros<br />
| DX Dealextreme<br />
| 6,20€<br />
| [http://www.dx.com/es/p/diy-pet-braided-6mm-cable-management-sleeving-black-1530cm-202845 Enlace]<br />
|-<br />
| 18/03/2014<br />
| Maya de nylon amarilla trenzada, manguito 4mm, 5 metros<br />
| Ebay UK<br />
| 5€<br />
| [http://www.ebay.es/itm/181242472964 Enlace]<br />
|-<br />
| 16/03/2014<br />
| Geetech Smart controller LCD12864 Version (LED turn on control) [https://lh5.googleusercontent.com/-it3o4S0D5F8/UznVkFIiHMI/AAAAAAAAJIw/lCv4Zr9T16I/w927-h521-no/IMG_20140331_224511603.JPG FOTO1] [https://lh5.googleusercontent.com/-x5KVLjF9hxE/UznVkoIG4CI/AAAAAAAAJI0/2TKkD17dsF4/w927-h521-no/IMG_20140331_224519522_HDR+%25281%2529.jpg FOTO2]<br />
| geeetech.com<br />
| 26€ (oferta finde)Tb. Disponible 21€ [http://www.ebay.es/itm/Smart-controller-12864-LCD-Display-control-adapte-FOR-3D-Printer-RepRap-MendeLl-/291041498158 Ebay]<br />
| [http://www.geeetech.com/ramps14-smart-controller-lcd12864-version-led-turn-on-control-p-690.html Enlace]<br />
|-<br />
| 20/03/2014<br />
| Tira de leds blancos 3528, 60 leds, 1 metro [https://lh3.googleusercontent.com/-qkuu3mv9a8U/UzpcKskSYwI/AAAAAAAAJOA/-mJPFM1TPKo/w927-h696-no/DSCN5048.JPG FOTO ]<br />
| Ebay españa<br />
| 3,7€<br />
| [http://www.ebay.es/itm/261415313444 Enlace]<br />
|-<br />
| 20/03/2014<br />
| Servo 9G TOWER PRO SG90 <br />
| Ebay españa<br />
| 5,9€<br />
| [http://www.ebay.es/itm/321334988386 Enlace]<br />
|}<br />
<br />
'''LISTADO COMPLETO GOOGLE DOCS'''<br />
<br />
[https://docs.google.com/spreadsheet/ccc?key=0Av_gWNbO_3opdDE0UzRCTnY0VTUtUmdrT1BhYk5qNGc#gid=0 Listado Google DOCS con enlaces y precios]<br />
<br />
<br />
'''Materiales no comprados (reciclados, etc)'''<br />
<br />
- 3x Rodamiento 608ZZ Abec 7 (Patines)<br />
<br />
- 1x Fuente alimentacion 500W ATX (12V- 28A)<br />
<br />
- 1x Ventilador 40x40mm<br />
<br />
- 1x Ventilador 60x60mm<br />
<br />
- 1x Ventilador 80x80mm<br />
<br />
- 1x Disipador memoria RAM [http://www.guru3d.com/miraserver/images/2009/decade-guru3d/IMG_7078.jpg Hercules GeForce 2 GTS] Partido en trozos para los pololu: [https://lh6.googleusercontent.com/-5eVavMqxExQ/UyArq_JF3pI/AAAAAAAAG5M/zu0y_CLpGGo/w839-h518-no/disipas.jpg Foto Resultado]<br />
<br />
<br />
Última Edición fecha: '''31-03-2014'''<br />
<center>[[File:Stryper-Guitars-Miniature.jpg]]</center><br />
<br />
== '''Mejoras Impresas / Diseñadas''' ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Pieza'''<br />
| '''Material'''<br />
| '''Impreso'''<br />
| '''Diseño propio'''<br />
| '''Tinkerkad'''<br />
| '''Thingverse'''<br />
| '''Observaciones'''<br />
|-<br />
|Tapa Skull para engranage grande<br />
[[File:Skull_gear_lokus.jpg|Tapa calavera engranage grande]]<br />
| ABS plateado<br />
| SI<br />
| SI, '''remix''' desde [http://www.thingiverse.com/thing:49220 Skulltruder]<br />
|[https://tinkercad.com/things/8fBhMLMNT1R-tapa-para-gear '''Enlace''']<br />
|[http://www.thingiverse.com/thing:258657 '''Enlace''']<br />
| Necesario limar, impresa con soportes.<br />
|-<br />
|Estabilizador eje Z prusa i3<br />
[[File:Stryper Mejora Marco.jpg|300px|Estabilizador eje Z prusa i3]]<br />
| ABS Amararillo<br />
| SI<br />
| NO<br />
|<br />
|[http://www.thingiverse.com/thing:100128 Enlace]<br />
| Requiere varillas traseras más largas. Agrega infinita estabilidad <br />
|<br />
|-<br />
|Sujección LM8uu a cama<br />
| ABS Amararillo<br />
| SI<br />
| NO<br />
|<br />
|[http://www.thingiverse.com/thing:57770 Enlace]<br />
| Puede requerir editar la separación de los agujeros <br />
|<br />
|-<br />
|Logo Stryper<br />
[[File:Stryper display large.jpg|300px|Logo Stryper (Mejora visual)]]<br />
| ABS Amararillo<br />
| SI<br />
| SI (vectorizado desde jpg)<br />
|[https://tinkercad.com/things/fJ0ElN03bw9-stryper-logo enlace]<br />
|[http://www.thingiverse.com/thing:262879 Enlace]<br />
| mejora '''visual''' (cero utilidad, solo alegrar el ojo)<br />
|<br />
|-<br />
|Adaptador hotend E3D Fan40mm + brida<br />
[[File:E3D 40mm.jpg|300px|Adaptador hotend E3D Fan40mm + brida]]<br />
| ABS azul<br />
| SI<br />
| SI, remix <br />
|[https://tinkercad.com/things/b9qiHDtoILL-hotend-e3d-v5-apano-ventiladores-40mm-y-sujeccion-brida '''Enlace''']<br />
|[http://www.thingiverse.com/thing:251563 '''Enlace''']<br />
| Puede usarse con un ventilador de 60mm añadiendo un adaptador adicional. <br />
|-<br />
| '''Sujección integral Jonas-E3D Fan40mm'''<br />
[[File:lokusE3d_01.jpg|300px|Sujección integral Jonas-E3D Fan40mm]]<br />
| ABS <br />
| EN CURSO<br />
| SI, remix de 3 o 4<br />
|EN BREVE<br />
|EN BREVE<br />
| Creada para evitar el balanceo del hotend en el eje Y. Proporciona una sujección mayor al extrusor.<br />
<br />
La sujección tradicional coje juego, y termina moviéndose unos mm con la mano / en algunas impresiones<br />
|}<br />
[[File:lokusE3d_02.jpg|300px|Sujección integral Jonas-E3D Fan40mm]]<br />
[[File:lokusE3d_03.jpg|300px|Sujección integral Jonas-E3D Fan40mm]]<br />
<br />
[[Category:Clone wars]]</div>
Lokus77
https://reprap.org/mediawiki/index.php?title=Clone_Wars:_Impresora_Stryper&diff=121543
Clone Wars: Impresora Stryper
2014-03-31T21:46:29Z
<p>Lokus77: /* Compras de material */</p>
<hr />
<div><center><br />
== '''Prusa I3 STRYPER''' ==<br />
[[File:Stryper.jpg|Stryper.jpg]]<br />
</center><br />
<br />
'''Impresora Prusa iteración 3 completa en Negro y Amarillo.''' <br />
Bautizada como Stryper en honor al grupo de Glam / Hard rock americano [http://www.stryper.com/ Stryper] *<br />
<br />
(* Aunque hagan hard rock cristiano y sean unos putos moñas , SI, me gustan, ¡qué pasa!)<br />
<br />
<br />
<br />
'''Premisas:'''<br />
<br />
1.- Montar la impresora con poco dinero. Se han utilizado los componentes más económicos encontrados (cumpliendo la premisa inferior), excepto en el hotend, que se ha preferido invertir más dinero en un Allmetal.<br />
<br />
2.- Para el montaje de la impresora, si existe un componente en negro o en amarillo, se monta.<br />
<br />
Si no existe,'''¡se pinta!''' (Excepto que sea necesariamente de otro color, como las varillas color metal, etc.)<br />
<br />
La idea es que todo sea negro o amarillo, si algún componente plástico es de otro color, es un objeto en pruebas/evolución/mejora.<br />
<br />
3.- Los motores de 2.5A apestan, están mal dimensionados. Se buscaban motores del máximo torque posible comprados en españa, de máximo 1.7A.<br />
<br />
<br />
== Ficha ==<br />
{| class="wikitable" style="width:100%"<br />
|- <br />
| <center>[[File:I3_stryper.jpg|thumb|Impresora Stryper.]]</center><br />
|<br />
* '''Nombre''': '''<font color="#000000">Stryper</font>'''<br />
* '''Autor''': '''[http://www.reprap.org/wiki/User:Lokus77 LoKuS77]'''<br />
* '''Rango''': Jedi <br />
* '''Familia''': [[Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame |Prusa Mendel Iteration 3]]<br />
* '''Generación''': 7<br />
* '''Material''': Plástico ABS Amarillo. Metacrilato negro 10mm.<br />
* '''Color''': Negro / Amarillo<br />
* '''Electrónica''': [[RAMPS|RAMPS 1.4]]<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Gregs-Jonaskuehling V4<br />
* '''Hot-End''': E3D-v5 3mm<br />
* '''Nacimiento''': 10/02/2014<br />
* '''Impresora Progenitora''': Madre:baru (Sin inscribir), Abuela: jester (Sin inscribir), Bisabuelas: #39, #134,#90<br />
* '''Hijos''': Sin descendencia (por ahora)<br />
* '''Imágenes ''': [https://plus.google.com/photos/118042097759435445983/albums/5986890523351025217 Galería Fotos Google+]<br />
| <center></center><br />
|}<br />
<br />
== Cronología ==<br />
* '''28/08/2013''' - Inicio del proyecto.<br />
* Se va pidiendo el material, va llegando...<br />
* '''31/01/2014''' - Llegan los motores. Era lo último imprescindible para funcionar. Ya se puede terminar el montaje!!<br />
* '''01/02/2014''' - Compramos primer rollo de ABS<br />
* '''02/02/2014''' - Primeras pruebas impresión. '''Cubo calibración calidad pasable'''. Monedas calibración y demás pruebas<br />
* '''10/02/2014''' - Se considera impresora como "viva". :) Mejoras en curso....<br />
<br />
== Compras de material ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Compra'''<br />
| '''Material'''<br />
| '''Comprado en'''<br />
| '''Precio(portes incluídos)'''<br />
| '''Observaciones'''<br />
|-<br />
|''' SEPTIEMBRE'''<br />
|-<br />
| 03/09/2013<br />
| 10 Rodamientos LM8UU <br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 10€<br />
|-<br />
| 03/09/2013<br />
| 2 Rodamientos 623ZZ10 <br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 1€<br />
|-<br />
| 03/09/2013<br />
| Kit Tornilleria Prusa I3 single frame (Con muelles M3)<br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 10€<br />
| [http://www.imprimiendoen3d.es/index.php?id_product=17&controller=product&id_lang=1 enlace]<br />
|-<br />
| 03/09/2013<br />
| KIT VARILLAS ROSCADAS Y LISAS PRUSA I3 SINGLE FRAME<br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 22€<br />
| [http://www.imprimiendoen3d.es/index.php?id_product=20&controller=product&id_lang=1 enlace]<br />
|-<br />
| 03/09/2013<br />
| Marco Metacrilato 10mm Negro<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 40+7€<br />
|[https://11094530530805020601.googlegroups.com/attach/22e38efead88a7d6/marcoNegro.jpg?view=1&part=5 Foto]<br />
|-<br />
| 03/09/2013<br />
| 2 Poleas T2.5<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 4€<br />
|-<br />
| 03/09/2013<br />
| 2 Termistores cama Epcos 100k<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Kit piezas amarillas by Baru<br />
| Baru<br />
| Donación <br />
| [https://lh4.googleusercontent.com/-8wo9FfWgBGo/Ui5NldSUwtI/AAAAAAABLkQ/LvINckJW4K0/w927-h696-no/2013-09-09 foto]<br />
|-<br />
| 10/09/2013<br />
| Correa GT2.5 2x1m<br />
| Baru<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Espejo Ikea 20x20<br />
| Baru<br />
| Regalo<br />
|-<br />
|'''NOVIEMBRE'''<br />
|-<br />
| 07/11/2013<br />
| Hobbed Bolt M8<br />
| [http://www.ebay.es/usr/jesmar_zgz Jesmar_Zgz (ebay)]<br />
| 5,5€<br />
| [http://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/xi8AAOxyKsZRr0to/$T2eC16R,!ykE9s7t%29d!SBRr0tn3vLw~~60_57.JPG Foto]<br />
|-<br />
| 07/11/2013<br />
| Arduino SainSmart Mega2560 R3 '''Negro'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 13,7€<br />
| [http://www.ebay.es/itm/SainSmart-Mega2560-R3-ATmega2560-16AU-ATMEGA16U2-USB-Cable-For-Arduino-2013-/271187169712 enlace]<br />
|-<br />
| 07/11/2013<br />
| Heatbed SainSmart MK2B '''Negra'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 12,9€<br />
| [http://www.ebay.com/itm/SainSmart-MK2B-Heat-Bed-Heatbed-Hot-Plate-For-RepRap-Mendel-Prusa-3D-Printer-/121171627059 enlace]<br />
|-<br />
| 07/11/2013<br />
| Ramps 1.4<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 11,6€<br />
| [http://www.ebay.es/itm/3D-Printer-Controller-for-RAMPS-1-4-REPRAP-MENDEL-PRUSA-for-Arduino-/310699832639 enlace]<br />
|-<br />
| 07/11/2013<br />
| [http://i.ebayimg.com/00/s/NTk4WDYwMw==/z/GPQAAOxyrxZR2o5V/$%28KGrHqF,!ocFG6JtsySfBR2o5U6vnQ~~60_12.JPG 5 StepStick A4988 3D]<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 14,4€<br />
| [http://www.ebay.es/itm/5PCS-StepStick-Stepper-motor-driver-A4988-3D-Printer-driver-module-Reprap-Prus-/400525154696 enlace]<br />
|-<br />
| 07/11/2013<br />
| [https://lh6.googleusercontent.com/-2wXcZWexoec/UqZlmrQtoaI/AAAAAAAAFz0/786ZDUn-17U/w927-h696-no/DSCN0167.JPG 3 Endstops Mecánico con Led]<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 8€<br />
| [http://www.ebay.es/itm/Mech-Endstop-Switch-Kit-for-CNC-3D-Printer-RepRap-Makerbot-Prusa-Mendel-RAMPS1-4-/200950337317 enlace]<br />
|-<br />
| 07/11/2013<br />
| 10 tiras de 40 pines<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 1,2€<br />
| [http://www.ebay.es/itm/10PCS-40Pin-2-54mm-Single-Row-Straight-Male-Pin-Header-Strip-PBC-Ardunio-/180974247480 enlace]<br />
|-<br />
| 07/11/2013<br />
| 40 cables dupont de 20cm<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 1,6€<br />
| [http://www.ebay.es/itm/40PCS-Dupont-wire-jumpercables-20cm-2-54MM-male-to-female-1P-1P-For-Arduino-/181011986500 enlace]<br />
|-<br />
| 26/11/2013<br />
| Calibre Digital chino<br />
| [http://www.ebay.com/usr/hkiron-my Hkyron-my (ebay)]<br />
| 7,7€<br />
| [http://www.ebay.com/itm/Electric-6-Stainless-Steel-Digital-Vernier-Dial-Caliper-Gauge-Micro-Meter-GOOD-/290897280812 enlace]<br />
|-<br />
| 28/11/2013<br />
| Pegamento térmico disipadores<br />
| [http://www.ebay.es/usr/qqlinkys2009 qqlinkys2009 (ebay)]<br />
| 1€<br />
| [http://www.ebay.es/itm/Grasa-de-Silicona-Thermal-Compound-Glue-Heatsink-Plaster-STARS-922-para-CPU-GPU-/291093278661 enlace]<br />
|-<br />
|FOTO ELECTRONICA<br />
|[https://lh4.googleusercontent.com/-YESqsEQPlMI/UqZiY8DWwzI/AAAAAAAAFxI/Q-_juGrK4rc/w927-h696-no/DSCN0138.JPG Pedido Ebay China Electrónica]<br />
|-<br />
| 29/11/2013<br />
| Hotend E3D V5 3mm Direct Extrusion<br />
| [http://e3d-online.com/E3D-HotEnds/E3D-DirectFeed-HotEnds/E3D-V5-3mm-Direct-All-Metal-HotEnd E3D-Online]<br />
| 68€ (57£)<br />
| [https://lh5.googleusercontent.com/-JOd7ZUCCD6M/UqZkr_2DpwI/AAAAAAAAFyg/18sSCYtIhBM/w927-h696-no/DSCN0154.JPG Foto]<br />
|-<br />
|'''ENERO'''<br />
|-<br />
| 26/01/2014<br />
| [https://lh3.googleusercontent.com/-Tby4Im_MRW4/UwHygr-8-uI/AAAAAAAAGPA/UiGzL8tT9aI/w881-h647-no/motores2.jpg 5 X Motor '''TB42HT47-1684AC''' Nema17 Torque 4.4kg/cm, 1.68A]<br />
| [http://store.thingibox.com/es/motores/27-stepper_nema17.html#/tipo-un_eje_p_n_tb42ht47_1684ac Thingibox]<br />
| 70€ (65+5)<br />
| Cable 70cm. Incluye conectores<br />
|-<br />
|'''FEBRERO'''<br />
|-<br />
| 04/02/2014<br />
| Grasa de Litio (500gr)<br />
| Amazon<br />
| 7,5€<br />
| [http://www.amazon.es/dp/B002E2QM6S Enlace]<br />
|-<br />
| 25/02/2014<br />
| 2 acopladores flexibles 5x5mm<br />
| José Castrillo (Clone wars) albazetech3d@gmail.com<br />
| 6€ (2x 2.5€ + 1€ correos)<br />
|-<br />
|'''MARZO'''<br />
|-<br />
| 08/03/2014<br />
| Cinta Kapton 24mm Rollo 33metros<br />
| DX Dealextreme<br />
| 3,77€<br />
| [http://dx.com/es/p/polyimide-heat-resistant-high-temperature-adhesive-tape-24mm-33m-260-c-21359 Enlace]<br />
|-<br />
| 08/03/2014<br />
| Destornillador cerámico precisión<br />
| DX Dealextreme<br />
| 1,4€<br />
| [http://dx.com/es/p/weitus-pro-ceramic-aligner-tool-6538 Enlace]<br />
|-<br />
| 08/03/2014<br />
| Multímetro decente, [https://www.youtube.com/watch?v=3y5wjaNusr0 Vichy-VC99] (Clon chino Fluke)<br />
| DX Dealextreme<br />
| 27€<br />
| [http://dx.com/es/p/3-0-lcd-handheld-digital-multimeter-voltage-current-resistance-temperature-2-aaa-37082 Enlace]<br />
|-<br />
| 08/03/2014<br />
| Maya de nylon negra trenzada, manguito 6mm, 15 metros<br />
| DX Dealextreme<br />
| 6,20€<br />
| [http://www.dx.com/es/p/diy-pet-braided-6mm-cable-management-sleeving-black-1530cm-202845 Enlace]<br />
|-<br />
| 18/03/2014<br />
| Maya de nylon amarilla trenzada, manguito 4mm, 5 metros<br />
| Ebay UK<br />
| 5€<br />
| [http://www.ebay.es/itm/181242472964 Enlace]<br />
|-<br />
| 16/03/2014<br />
| Geetech Smart controller LCD12864 Version (LED turn on control)<br />
| geeetech.com<br />
| 26€ (oferta finde)Tb. Disponible 21€ [http://www.ebay.es/itm/Smart-controller-12864-LCD-Display-control-adapte-FOR-3D-Printer-RepRap-MendeLl-/291041498158 Ebay]<br />
| [http://www.geeetech.com/ramps14-smart-controller-lcd12864-version-led-turn-on-control-p-690.html Enlace]<br />
|-<br />
| 20/03/2014<br />
| Tira de leds blancos 3528, 60 leds, 1 metro<br />
| Ebay españa<br />
| 3,7€<br />
| [http://www.ebay.es/itm/261415313444 Enlace]<br />
|-<br />
| 20/03/2014<br />
| Servo 9G TOWER PRO SG90 <br />
| Ebay españa<br />
| 5,9€<br />
| [http://www.ebay.es/itm/321334988386 Enlace]<br />
|}<br />
<br />
'''LISTADO COMPLETO GOOGLE DOCS'''<br />
<br />
[https://docs.google.com/spreadsheet/ccc?key=0Av_gWNbO_3opdDE0UzRCTnY0VTUtUmdrT1BhYk5qNGc#gid=0 Listado Google DOCS con enlaces y precios]<br />
<br />
<br />
'''Materiales no comprados (reciclados, etc)'''<br />
<br />
- 3x Rodamiento 608ZZ Abec 7 (Patines)<br />
<br />
- 1x Fuente alimentacion 500W ATX (12V- 28A)<br />
<br />
- 1x Ventilador 40x40mm<br />
<br />
- 1x Ventilador 60x60mm<br />
<br />
- 1x Ventilador 80x80mm<br />
<br />
- 1x Disipador memoria RAM [http://www.guru3d.com/miraserver/images/2009/decade-guru3d/IMG_7078.jpg Hercules GeForce 2 GTS] Partido en trozos para los pololu: [https://lh6.googleusercontent.com/-5eVavMqxExQ/UyArq_JF3pI/AAAAAAAAG5M/zu0y_CLpGGo/w839-h518-no/disipas.jpg Foto Resultado]<br />
<br />
<br />
Última Edición fecha: '''31-03-2014'''<br />
<center>[[File:Stryper-Guitars-Miniature.jpg]]</center><br />
<br />
== '''Mejoras Impresas / Diseñadas''' ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Pieza'''<br />
| '''Material'''<br />
| '''Impreso'''<br />
| '''Diseño propio'''<br />
| '''Tinkerkad'''<br />
| '''Thingverse'''<br />
| '''Observaciones'''<br />
|-<br />
|Tapa Skull para engranage grande<br />
[[File:Skull_gear_lokus.jpg|Tapa calavera engranage grande]]<br />
| ABS plateado<br />
| SI<br />
| SI, '''remix''' desde [http://www.thingiverse.com/thing:49220 Skulltruder]<br />
|[https://tinkercad.com/things/8fBhMLMNT1R-tapa-para-gear '''Enlace''']<br />
|[http://www.thingiverse.com/thing:258657 '''Enlace''']<br />
| Necesario limar, impresa con soportes.<br />
|-<br />
|Estabilizador eje Z prusa i3<br />
[[File:Stryper Mejora Marco.jpg|300px|Estabilizador eje Z prusa i3]]<br />
| ABS Amararillo<br />
| SI<br />
| NO<br />
|<br />
|[http://www.thingiverse.com/thing:100128 Enlace]<br />
| Requiere varillas traseras más largas. Agrega infinita estabilidad <br />
|<br />
|-<br />
|Sujección LM8uu a cama<br />
| ABS Amararillo<br />
| SI<br />
| NO<br />
|<br />
|[http://www.thingiverse.com/thing:57770 Enlace]<br />
| Puede requerir editar la separación de los agujeros <br />
|<br />
|-<br />
|Logo Stryper<br />
[[File:Stryper display large.jpg|300px|Logo Stryper (Mejora visual)]]<br />
| ABS Amararillo<br />
| SI<br />
| SI (vectorizado desde jpg)<br />
|[https://tinkercad.com/things/fJ0ElN03bw9-stryper-logo enlace]<br />
|[http://www.thingiverse.com/thing:262879 Enlace]<br />
| mejora '''visual''' (cero utilidad, solo alegrar el ojo)<br />
|<br />
|-<br />
|Adaptador hotend E3D Fan40mm + brida<br />
[[File:E3D 40mm.jpg|300px|Adaptador hotend E3D Fan40mm + brida]]<br />
| ABS azul<br />
| SI<br />
| SI, remix <br />
|[https://tinkercad.com/things/b9qiHDtoILL-hotend-e3d-v5-apano-ventiladores-40mm-y-sujeccion-brida '''Enlace''']<br />
|[http://www.thingiverse.com/thing:251563 '''Enlace''']<br />
| Puede usarse con un ventilador de 60mm añadiendo un adaptador adicional. <br />
|-<br />
| '''Sujección integral Jonas-E3D Fan40mm'''<br />
[[File:lokusE3d_01.jpg|300px|Sujección integral Jonas-E3D Fan40mm]]<br />
| ABS <br />
| EN CURSO<br />
| SI, remix de 3 o 4<br />
|EN BREVE<br />
|EN BREVE<br />
| Creada para evitar el balanceo del hotend en el eje Y. Proporciona una sujección mayor al extrusor.<br />
<br />
La sujección tradicional coje juego, y termina moviéndose unos mm con la mano / en algunas impresiones<br />
|}<br />
[[File:lokusE3d_02.jpg|300px|Sujección integral Jonas-E3D Fan40mm]]<br />
[[File:lokusE3d_03.jpg|300px|Sujección integral Jonas-E3D Fan40mm]]<br />
<br />
[[Category:Clone wars]]</div>
Lokus77
https://reprap.org/mediawiki/index.php?title=Clone_Wars:_Impresora_Stryper&diff=121129
Clone Wars: Impresora Stryper
2014-03-25T11:42:48Z
<p>Lokus77: /* Ficha */</p>
<hr />
<div><center><br />
== '''Prusa I3 STRYPER''' ==<br />
[[File:Stryper.jpg|Stryper.jpg]]<br />
</center><br />
<br />
'''Impresora Prusa iteración 3 completa en Negro y Amarillo.''' <br />
Bautizada como Stryper en honor al grupo de Glam / Hard rock americano [http://www.stryper.com/ Stryper] *<br />
<br />
(* Aunque hagan hard rock cristiano y sean unos putos moñas , SI, me gustan, ¡qué pasa!)<br />
<br />
<br />
<br />
'''Premisas:'''<br />
<br />
1.- Montar la impresora con poco dinero. Se han utilizado los componentes más económicos encontrados (cumpliendo la premisa inferior), excepto en el hotend, que se ha preferido invertir más dinero en un Allmetal.<br />
<br />
2.- Para el montaje de la impresora, si existe un componente en negro o en amarillo, se monta.<br />
<br />
Si no existe,'''¡se pinta!''' (Excepto que sea necesariamente de otro color, como las varillas color metal, etc.)<br />
<br />
La idea es que todo sea negro o amarillo, si algún componente plástico es de otro color, es un objeto en pruebas/evolución/mejora.<br />
<br />
3.- Los motores de 2.5A apestan, están mal dimensionados. Se buscaban motores del máximo torque posible comprados en españa, de máximo 1.7A.<br />
<br />
<br />
== Ficha ==<br />
{| class="wikitable" style="width:100%"<br />
|- <br />
| <center>[[File:I3_stryper.jpg|thumb|Impresora Stryper.]]</center><br />
|<br />
* '''Nombre''': '''<font color="#000000">Stryper</font>'''<br />
* '''Autor''': '''[http://www.reprap.org/wiki/User:Lokus77 LoKuS77]'''<br />
* '''Rango''': Jedi <br />
* '''Familia''': [[Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame |Prusa Mendel Iteration 3]]<br />
* '''Generación''': 7<br />
* '''Material''': Plástico ABS Amarillo. Metacrilato negro 10mm.<br />
* '''Color''': Negro / Amarillo<br />
* '''Electrónica''': [[RAMPS|RAMPS 1.4]]<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Gregs-Jonaskuehling V4<br />
* '''Hot-End''': E3D-v5 3mm<br />
* '''Nacimiento''': 10/02/2014<br />
* '''Impresora Progenitora''': Madre:baru (Sin inscribir), Abuela: jester (Sin inscribir), Bisabuelas: #39, #134,#90<br />
* '''Hijos''': Sin descendencia (por ahora)<br />
* '''Imágenes ''': [https://plus.google.com/photos/118042097759435445983/albums/5986890523351025217 Galería Fotos Google+]<br />
| <center></center><br />
|}<br />
<br />
== Cronología ==<br />
* '''28/08/2013''' - Inicio del proyecto.<br />
* Se va pidiendo el material, va llegando...<br />
* '''31/01/2014''' - Llegan los motores. Era lo último imprescindible para funcionar. Ya se puede terminar el montaje!!<br />
* '''01/02/2014''' - Compramos primer rollo de ABS<br />
* '''02/02/2014''' - Primeras pruebas impresión. '''Cubo calibración calidad pasable'''. Monedas calibración y demás pruebas<br />
* '''10/02/2014''' - Se considera impresora como "viva". :) Mejoras en curso....<br />
<br />
== Compras de material ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Compra'''<br />
| '''Material'''<br />
| '''Comprado en'''<br />
| '''Precio(portes incluídos)'''<br />
| '''Observaciones'''<br />
|-<br />
|''' SEPTIEMBRE'''<br />
|-<br />
| 03/09/2013<br />
| 10 Rodamientos LM8UU <br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 10€<br />
|-<br />
| 03/09/2013<br />
| 2 Rodamientos 623ZZ10 <br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 1€<br />
|-<br />
| 03/09/2013<br />
| Kit Tornilleria Prusa I3 single frame (Con muelles M3)<br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 10€<br />
| [http://www.imprimiendoen3d.es/index.php?id_product=17&controller=product&id_lang=1 enlace]<br />
|-<br />
| 03/09/2013<br />
| KIT VARILLAS ROSCADAS Y LISAS PRUSA I3 SINGLE FRAME<br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 22€<br />
| [http://www.imprimiendoen3d.es/index.php?id_product=20&controller=product&id_lang=1 enlace]<br />
|-<br />
| 03/09/2013<br />
| Marco Metacrilato 10mm Negro<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 40+7€<br />
|[https://11094530530805020601.googlegroups.com/attach/22e38efead88a7d6/marcoNegro.jpg?view=1&part=5 Foto]<br />
|-<br />
| 03/09/2013<br />
| 2 Poleas T2.5<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 4€<br />
|-<br />
| 03/09/2013<br />
| 2 Termistores cama Epcos 100k<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Kit piezas amarillas by Baru<br />
| Baru<br />
| Donación <br />
| [https://lh4.googleusercontent.com/-8wo9FfWgBGo/Ui5NldSUwtI/AAAAAAABLkQ/LvINckJW4K0/w927-h696-no/2013-09-09 foto]<br />
|-<br />
| 10/09/2013<br />
| Correa GT2.5 2x1m<br />
| Baru<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Espejo Ikea 20x20<br />
| Baru<br />
| Regalo<br />
|-<br />
|'''NOVIEMBRE'''<br />
|-<br />
| 07/11/2013<br />
| Hobbed Bolt M8<br />
| [http://www.ebay.es/usr/jesmar_zgz Jesmar_Zgz (ebay)]<br />
| 5,5€<br />
| [http://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/xi8AAOxyKsZRr0to/$T2eC16R,!ykE9s7t%29d!SBRr0tn3vLw~~60_57.JPG Foto]<br />
|-<br />
| 07/11/2013<br />
| Arduino SainSmart Mega2560 R3 '''Negro'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 13,7€<br />
| [http://www.ebay.es/itm/SainSmart-Mega2560-R3-ATmega2560-16AU-ATMEGA16U2-USB-Cable-For-Arduino-2013-/271187169712 enlace]<br />
|-<br />
| 07/11/2013<br />
| Heatbed SainSmart MK2B '''Negra'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 12,9€<br />
| [http://www.ebay.com/itm/SainSmart-MK2B-Heat-Bed-Heatbed-Hot-Plate-For-RepRap-Mendel-Prusa-3D-Printer-/121171627059 enlace]<br />
|-<br />
| 07/11/2013<br />
| Ramps 1.4<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 11,6€<br />
| [http://www.ebay.es/itm/3D-Printer-Controller-for-RAMPS-1-4-REPRAP-MENDEL-PRUSA-for-Arduino-/310699832639 enlace]<br />
|-<br />
| 07/11/2013<br />
| [http://i.ebayimg.com/00/s/NTk4WDYwMw==/z/GPQAAOxyrxZR2o5V/$%28KGrHqF,!ocFG6JtsySfBR2o5U6vnQ~~60_12.JPG 5 StepStick A4988 3D]<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 14,4€<br />
| [http://www.ebay.es/itm/5PCS-StepStick-Stepper-motor-driver-A4988-3D-Printer-driver-module-Reprap-Prus-/400525154696 enlace]<br />
|-<br />
| 07/11/2013<br />
| [https://lh6.googleusercontent.com/-2wXcZWexoec/UqZlmrQtoaI/AAAAAAAAFz0/786ZDUn-17U/w927-h696-no/DSCN0167.JPG 3 Endstops Mecánico con Led]<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 8€<br />
| [http://www.ebay.es/itm/Mech-Endstop-Switch-Kit-for-CNC-3D-Printer-RepRap-Makerbot-Prusa-Mendel-RAMPS1-4-/200950337317 enlace]<br />
|-<br />
| 07/11/2013<br />
| 10 tiras de 40 pines<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 1,2€<br />
| [http://www.ebay.es/itm/10PCS-40Pin-2-54mm-Single-Row-Straight-Male-Pin-Header-Strip-PBC-Ardunio-/180974247480 enlace]<br />
|-<br />
| 07/11/2013<br />
| 40 cables dupont de 20cm<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 1,6€<br />
| [http://www.ebay.es/itm/40PCS-Dupont-wire-jumpercables-20cm-2-54MM-male-to-female-1P-1P-For-Arduino-/181011986500 enlace]<br />
|-<br />
| 26/11/2013<br />
| Calibre Digital chino<br />
| [http://www.ebay.com/usr/hkiron-my Hkyron-my (ebay)]<br />
| 7,7€<br />
| [http://www.ebay.com/itm/Electric-6-Stainless-Steel-Digital-Vernier-Dial-Caliper-Gauge-Micro-Meter-GOOD-/290897280812 enlace]<br />
|-<br />
| 28/11/2013<br />
| Pegamento térmico disipadores<br />
| [http://www.ebay.es/usr/qqlinkys2009 qqlinkys2009 (ebay)]<br />
| 1€<br />
| [http://www.ebay.es/itm/Grasa-de-Silicona-Thermal-Compound-Glue-Heatsink-Plaster-STARS-922-para-CPU-GPU-/291093278661 enlace]<br />
|-<br />
|FOTO ELECTRONICA<br />
|[https://lh4.googleusercontent.com/-YESqsEQPlMI/UqZiY8DWwzI/AAAAAAAAFxI/Q-_juGrK4rc/w927-h696-no/DSCN0138.JPG Pedido Ebay China Electrónica]<br />
|-<br />
| 29/11/2013<br />
| Hotend E3D V5 3mm Direct Extrusion<br />
| [http://e3d-online.com/E3D-HotEnds/E3D-DirectFeed-HotEnds/E3D-V5-3mm-Direct-All-Metal-HotEnd E3D-Online]<br />
| 68€ (57£)<br />
| [https://lh5.googleusercontent.com/-JOd7ZUCCD6M/UqZkr_2DpwI/AAAAAAAAFyg/18sSCYtIhBM/w927-h696-no/DSCN0154.JPG Foto]<br />
|-<br />
|'''ENERO'''<br />
|-<br />
| 26/01/2014<br />
| [https://lh3.googleusercontent.com/-Tby4Im_MRW4/UwHygr-8-uI/AAAAAAAAGPA/UiGzL8tT9aI/w881-h647-no/motores2.jpg 5 X Motor '''TB42HT47-1684AC''' Nema17 Torque 4.4kg/cm, 1.68A]<br />
| [http://store.thingibox.com/es/motores/27-stepper_nema17.html#/tipo-un_eje_p_n_tb42ht47_1684ac Thingibox]<br />
| 70€ (65+5)<br />
| Cable 70cm. Incluye conectores<br />
|-<br />
|'''FEBRERO'''<br />
|-<br />
| 04/02/2014<br />
| Grasa de Litio (500gr)<br />
| Amazon<br />
| 7,5€<br />
| [http://www.amazon.es/dp/B002E2QM6S Enlace]<br />
|-<br />
| 25/02/2014<br />
| 2 acopladores flexibles 5x5mm<br />
| José Castrillo (Clone wars) albazetech3d@gmail.com<br />
| 6€ (2x 2.5€ + 1€ correos)<br />
|-<br />
|'''MARZO'''<br />
|-<br />
| 18/03/2014<br />
| Cinta Kapton 24mm Rollo 33metros<br />
| DX Dealextreme<br />
| 3,77€<br />
| [http://dx.com/es/p/polyimide-heat-resistant-high-temperature-adhesive-tape-24mm-33m-260-c-21359 Enlace]<br />
|-<br />
| 18/03/2014<br />
| Destornillador cerámico precisión<br />
| DX Dealextreme<br />
| 1,4€<br />
| [http://dx.com/es/p/weitus-pro-ceramic-aligner-tool-6538 Enlace]<br />
|-<br />
| 18/03/2014<br />
| Multímetro decente, [https://www.youtube.com/watch?v=3y5wjaNusr0 Vichy-VC99] (Clon chino Fluke)<br />
| DX Dealextreme<br />
| 27€<br />
| [http://dx.com/es/p/3-0-lcd-handheld-digital-multimeter-voltage-current-resistance-temperature-2-aaa-37082 Enlace]<br />
|-<br />
| 18/03/2014<br />
| Maya de nylon amarilla trenzada, manguito 4mm, 5 metros<br />
| Ebay UK<br />
| 5€<br />
| [http://www.ebay.es/itm/181242472964 Enlace]<br />
|-<br />
| 20/03/2014<br />
| Tira de leds blancos 3528, 60 leds, 1 metro<br />
| Ebay españa<br />
| 3,7€<br />
| [http://www.ebay.es/itm/261415313444 Enlace]<br />
|-<br />
| 20/03/2014<br />
| Servo 9G TOWER PRO SG90 <br />
| Ebay españa<br />
| 5,9€<br />
| [http://www.ebay.es/itm/321334988386 Enlace]<br />
|}<br />
<br />
'''LISTADO COMPLETO GOOGLE DOCS'''<br />
<br />
[https://docs.google.com/spreadsheet/ccc?key=0Av_gWNbO_3opdDE0UzRCTnY0VTUtUmdrT1BhYk5qNGc#gid=0 Listado Google DOCS con enlaces y precios]<br />
<br />
<br />
'''Materiales no comprados (reciclados, etc)'''<br />
<br />
- 3x Rodamiento 608ZZ Abec 7 (Patines)<br />
<br />
- 1x Fuente alimentacion 500W ATX (12V- 28A)<br />
<br />
- 1x Ventilador 40x40mm<br />
<br />
- 1x Ventilador 60x60mm<br />
<br />
- 1x Ventilador 80x80mm<br />
<br />
- 1x Disipador memoria RAM [http://www.guru3d.com/miraserver/images/2009/decade-guru3d/IMG_7078.jpg Hercules GeForce 2 GTS] Partido en trozos para los pololu: [https://lh6.googleusercontent.com/-5eVavMqxExQ/UyArq_JF3pI/AAAAAAAAG5M/zu0y_CLpGGo/w839-h518-no/disipas.jpg Foto Resultado]<br />
<br />
<br />
Última Edición fecha: '''23-03-2014'''<br />
<center>[[File:Stryper-Guitars-Miniature.jpg]]</center><br />
<br />
== '''Mejoras Impresas / Diseñadas''' ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Pieza'''<br />
| '''Material'''<br />
| '''Impreso'''<br />
| '''Diseño propio'''<br />
| '''Tinkerkad'''<br />
| '''Thingverse'''<br />
| '''Observaciones'''<br />
|-<br />
|Tapa Skull para engranage grande<br />
[[File:Skull_gear_lokus.jpg|Tapa calavera engranage grande]]<br />
| ABS plateado<br />
| SI<br />
| SI, '''remix''' desde [http://www.thingiverse.com/thing:49220 Skulltruder]<br />
|[https://tinkercad.com/things/8fBhMLMNT1R-tapa-para-gear '''Enlace''']<br />
|[http://www.thingiverse.com/thing:258657 '''Enlace''']<br />
| Necesario limar, impresa con soportes.<br />
|-<br />
|Estabilizador eje Z prusa i3<br />
[[File:Stryper Mejora Marco.jpg|300px|Estabilizador eje Z prusa i3]]<br />
| ABS Amararillo<br />
| SI<br />
| NO<br />
|<br />
|[http://www.thingiverse.com/thing:100128 Enlace]<br />
| Requiere varillas traseras más largas. Agrega infinita estabilidad <br />
|<br />
|-<br />
|Sujección LM8uu a cama<br />
| ABS Amararillo<br />
| SI<br />
| NO<br />
|<br />
|[http://www.thingiverse.com/thing:57770 Enlace]<br />
| Puede requerir editar la separación de los agujeros <br />
|<br />
|-<br />
|Logo Stryper<br />
[[File:Stryper display large.jpg|300px|Logo Stryper (Mejora visual)]]<br />
| ABS Amararillo<br />
| SI<br />
| SI (vectorizado desde jpg)<br />
|[https://tinkercad.com/things/fJ0ElN03bw9-stryper-logo enlace]<br />
|[http://www.thingiverse.com/thing:262879 Enlace]<br />
| mejora '''visual''' (cero utilidad, solo alegrar el ojo)<br />
|<br />
|-<br />
|Adaptador hotend E3D Fan40mm + brida<br />
[[File:E3D 40mm.jpg|300px|Adaptador hotend E3D Fan40mm + brida]]<br />
| ABS azul<br />
| SI<br />
| SI, remix <br />
|[https://tinkercad.com/things/b9qiHDtoILL-hotend-e3d-v5-apano-ventiladores-40mm-y-sujeccion-brida '''Enlace''']<br />
|[http://www.thingiverse.com/thing:251563 '''Enlace''']<br />
| Puede usarse con un ventilador de 60mm añadiendo un adaptador adicional. <br />
|-<br />
| '''Sujección integral Jonas-E3D Fan40mm'''<br />
[[File:lokusE3d_01.jpg|300px|Sujección integral Jonas-E3D Fan40mm]]<br />
| ABS <br />
| EN CURSO<br />
| SI, remix de 3 o 4<br />
|EN BREVE<br />
|EN BREVE<br />
| Creada para evitar el balanceo del hotend en el eje Y. Proporciona una sujección mayor al extrusor.<br />
<br />
La sujección tradicional coje juego, y termina moviéndose unos mm con la mano / en algunas impresiones<br />
|}<br />
[[File:lokusE3d_02.jpg|300px|Sujección integral Jonas-E3D Fan40mm]]<br />
[[File:lokusE3d_03.jpg|300px|Sujección integral Jonas-E3D Fan40mm]]<br />
<br />
[[Category:Clone wars]]</div>
Lokus77
https://reprap.org/mediawiki/index.php?title=Clone_Wars:_Impresora_Stryper&diff=121128
Clone Wars: Impresora Stryper
2014-03-25T11:27:14Z
<p>Lokus77: /* Ficha */</p>
<hr />
<div><center><br />
== '''Prusa I3 STRYPER''' ==<br />
[[File:Stryper.jpg|Stryper.jpg]]<br />
</center><br />
<br />
'''Impresora Prusa iteración 3 completa en Negro y Amarillo.''' <br />
Bautizada como Stryper en honor al grupo de Glam / Hard rock americano [http://www.stryper.com/ Stryper] *<br />
<br />
(* Aunque hagan hard rock cristiano y sean unos putos moñas , SI, me gustan, ¡qué pasa!)<br />
<br />
<br />
<br />
'''Premisas:'''<br />
<br />
1.- Montar la impresora con poco dinero. Se han utilizado los componentes más económicos encontrados (cumpliendo la premisa inferior), excepto en el hotend, que se ha preferido invertir más dinero en un Allmetal.<br />
<br />
2.- Para el montaje de la impresora, si existe un componente en negro o en amarillo, se monta.<br />
<br />
Si no existe,'''¡se pinta!''' (Excepto que sea necesariamente de otro color, como las varillas color metal, etc.)<br />
<br />
La idea es que todo sea negro o amarillo, si algún componente plástico es de otro color, es un objeto en pruebas/evolución/mejora.<br />
<br />
3.- Los motores de 2.5A apestan, están mal dimensionados. Se buscaban motores del máximo torque posible comprados en españa, de máximo 1.7A.<br />
<br />
<br />
== Ficha ==<br />
{| class="wikitable" style="width:100%"<br />
|- <br />
| <center>[[File:I3_stryper.jpg|thumb|Impresora Stryper.]]</center><br />
|<br />
* '''Nombre''': '''<font color="#000000">Stryper</font>'''<br />
* '''Autor''': '''[http://www.reprap.org/wiki/User:Lokus77 | LoKuS77]'''<br />
* '''Rango''': Jedi <br />
* '''Familia''': [[Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame |Prusa Mendel Iteration 3]]<br />
* '''Generación''': 7<br />
* '''Material''': Plástico ABS Amarillo. Metacrilato negro 10mm.<br />
* '''Color''': Negro / Amarillo<br />
* '''Electrónica''': [[RAMPS|RAMPS 1.4]]<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Gregs-Jonaskuehling V4<br />
* '''Hot-End''': E3D-v5 3mm<br />
* '''Nacimiento''': 10/02/2014<br />
* '''Impresora Progenitora''': Madre:baru (Sin inscribir), Abuela: jester (Sin inscribir), Bisabuelas: #39, #134,#90<br />
* '''Hijos''': Sin descendencia (por ahora)<br />
* '''Imágenes ''': [https://plus.google.com/photos/118042097759435445983/albums/5986890523351025217 Galería Fotos Google+]<br />
| <center></center><br />
|}<br />
<br />
== Cronología ==<br />
* '''28/08/2013''' - Inicio del proyecto.<br />
* Se va pidiendo el material, va llegando...<br />
* '''31/01/2014''' - Llegan los motores. Era lo último imprescindible para funcionar. Ya se puede terminar el montaje!!<br />
* '''01/02/2014''' - Compramos primer rollo de ABS<br />
* '''02/02/2014''' - Primeras pruebas impresión. '''Cubo calibración calidad pasable'''. Monedas calibración y demás pruebas<br />
* '''10/02/2014''' - Se considera impresora como "viva". :) Mejoras en curso....<br />
<br />
== Compras de material ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Compra'''<br />
| '''Material'''<br />
| '''Comprado en'''<br />
| '''Precio(portes incluídos)'''<br />
| '''Observaciones'''<br />
|-<br />
|''' SEPTIEMBRE'''<br />
|-<br />
| 03/09/2013<br />
| 10 Rodamientos LM8UU <br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 10€<br />
|-<br />
| 03/09/2013<br />
| 2 Rodamientos 623ZZ10 <br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 1€<br />
|-<br />
| 03/09/2013<br />
| Kit Tornilleria Prusa I3 single frame (Con muelles M3)<br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 10€<br />
| [http://www.imprimiendoen3d.es/index.php?id_product=17&controller=product&id_lang=1 enlace]<br />
|-<br />
| 03/09/2013<br />
| KIT VARILLAS ROSCADAS Y LISAS PRUSA I3 SINGLE FRAME<br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 22€<br />
| [http://www.imprimiendoen3d.es/index.php?id_product=20&controller=product&id_lang=1 enlace]<br />
|-<br />
| 03/09/2013<br />
| Marco Metacrilato 10mm Negro<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 40+7€<br />
|[https://11094530530805020601.googlegroups.com/attach/22e38efead88a7d6/marcoNegro.jpg?view=1&part=5 Foto]<br />
|-<br />
| 03/09/2013<br />
| 2 Poleas T2.5<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 4€<br />
|-<br />
| 03/09/2013<br />
| 2 Termistores cama Epcos 100k<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Kit piezas amarillas by Baru<br />
| Baru<br />
| Donación <br />
| [https://lh4.googleusercontent.com/-8wo9FfWgBGo/Ui5NldSUwtI/AAAAAAABLkQ/LvINckJW4K0/w927-h696-no/2013-09-09 foto]<br />
|-<br />
| 10/09/2013<br />
| Correa GT2.5 2x1m<br />
| Baru<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Espejo Ikea 20x20<br />
| Baru<br />
| Regalo<br />
|-<br />
|'''NOVIEMBRE'''<br />
|-<br />
| 07/11/2013<br />
| Hobbed Bolt M8<br />
| [http://www.ebay.es/usr/jesmar_zgz Jesmar_Zgz (ebay)]<br />
| 5,5€<br />
| [http://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/xi8AAOxyKsZRr0to/$T2eC16R,!ykE9s7t%29d!SBRr0tn3vLw~~60_57.JPG Foto]<br />
|-<br />
| 07/11/2013<br />
| Arduino SainSmart Mega2560 R3 '''Negro'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 13,7€<br />
| [http://www.ebay.es/itm/SainSmart-Mega2560-R3-ATmega2560-16AU-ATMEGA16U2-USB-Cable-For-Arduino-2013-/271187169712 enlace]<br />
|-<br />
| 07/11/2013<br />
| Heatbed SainSmart MK2B '''Negra'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 12,9€<br />
| [http://www.ebay.com/itm/SainSmart-MK2B-Heat-Bed-Heatbed-Hot-Plate-For-RepRap-Mendel-Prusa-3D-Printer-/121171627059 enlace]<br />
|-<br />
| 07/11/2013<br />
| Ramps 1.4<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 11,6€<br />
| [http://www.ebay.es/itm/3D-Printer-Controller-for-RAMPS-1-4-REPRAP-MENDEL-PRUSA-for-Arduino-/310699832639 enlace]<br />
|-<br />
| 07/11/2013<br />
| [http://i.ebayimg.com/00/s/NTk4WDYwMw==/z/GPQAAOxyrxZR2o5V/$%28KGrHqF,!ocFG6JtsySfBR2o5U6vnQ~~60_12.JPG 5 StepStick A4988 3D]<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 14,4€<br />
| [http://www.ebay.es/itm/5PCS-StepStick-Stepper-motor-driver-A4988-3D-Printer-driver-module-Reprap-Prus-/400525154696 enlace]<br />
|-<br />
| 07/11/2013<br />
| [https://lh6.googleusercontent.com/-2wXcZWexoec/UqZlmrQtoaI/AAAAAAAAFz0/786ZDUn-17U/w927-h696-no/DSCN0167.JPG 3 Endstops Mecánico con Led]<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 8€<br />
| [http://www.ebay.es/itm/Mech-Endstop-Switch-Kit-for-CNC-3D-Printer-RepRap-Makerbot-Prusa-Mendel-RAMPS1-4-/200950337317 enlace]<br />
|-<br />
| 07/11/2013<br />
| 10 tiras de 40 pines<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 1,2€<br />
| [http://www.ebay.es/itm/10PCS-40Pin-2-54mm-Single-Row-Straight-Male-Pin-Header-Strip-PBC-Ardunio-/180974247480 enlace]<br />
|-<br />
| 07/11/2013<br />
| 40 cables dupont de 20cm<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 1,6€<br />
| [http://www.ebay.es/itm/40PCS-Dupont-wire-jumpercables-20cm-2-54MM-male-to-female-1P-1P-For-Arduino-/181011986500 enlace]<br />
|-<br />
| 26/11/2013<br />
| Calibre Digital chino<br />
| [http://www.ebay.com/usr/hkiron-my Hkyron-my (ebay)]<br />
| 7,7€<br />
| [http://www.ebay.com/itm/Electric-6-Stainless-Steel-Digital-Vernier-Dial-Caliper-Gauge-Micro-Meter-GOOD-/290897280812 enlace]<br />
|-<br />
| 28/11/2013<br />
| Pegamento térmico disipadores<br />
| [http://www.ebay.es/usr/qqlinkys2009 qqlinkys2009 (ebay)]<br />
| 1€<br />
| [http://www.ebay.es/itm/Grasa-de-Silicona-Thermal-Compound-Glue-Heatsink-Plaster-STARS-922-para-CPU-GPU-/291093278661 enlace]<br />
|-<br />
|FOTO ELECTRONICA<br />
|[https://lh4.googleusercontent.com/-YESqsEQPlMI/UqZiY8DWwzI/AAAAAAAAFxI/Q-_juGrK4rc/w927-h696-no/DSCN0138.JPG Pedido Ebay China Electrónica]<br />
|-<br />
| 29/11/2013<br />
| Hotend E3D V5 3mm Direct Extrusion<br />
| [http://e3d-online.com/E3D-HotEnds/E3D-DirectFeed-HotEnds/E3D-V5-3mm-Direct-All-Metal-HotEnd E3D-Online]<br />
| 68€ (57£)<br />
| [https://lh5.googleusercontent.com/-JOd7ZUCCD6M/UqZkr_2DpwI/AAAAAAAAFyg/18sSCYtIhBM/w927-h696-no/DSCN0154.JPG Foto]<br />
|-<br />
|'''ENERO'''<br />
|-<br />
| 26/01/2014<br />
| [https://lh3.googleusercontent.com/-Tby4Im_MRW4/UwHygr-8-uI/AAAAAAAAGPA/UiGzL8tT9aI/w881-h647-no/motores2.jpg 5 X Motor '''TB42HT47-1684AC''' Nema17 Torque 4.4kg/cm, 1.68A]<br />
| [http://store.thingibox.com/es/motores/27-stepper_nema17.html#/tipo-un_eje_p_n_tb42ht47_1684ac Thingibox]<br />
| 70€ (65+5)<br />
| Cable 70cm. Incluye conectores<br />
|-<br />
|'''FEBRERO'''<br />
|-<br />
| 04/02/2014<br />
| Grasa de Litio (500gr)<br />
| Amazon<br />
| 7,5€<br />
| [http://www.amazon.es/dp/B002E2QM6S Enlace]<br />
|-<br />
| 25/02/2014<br />
| 2 acopladores flexibles 5x5mm<br />
| José Castrillo (Clone wars) albazetech3d@gmail.com<br />
| 6€ (2x 2.5€ + 1€ correos)<br />
|-<br />
|'''MARZO'''<br />
|-<br />
| 18/03/2014<br />
| Cinta Kapton 24mm Rollo 33metros<br />
| DX Dealextreme<br />
| 3,77€<br />
| [http://dx.com/es/p/polyimide-heat-resistant-high-temperature-adhesive-tape-24mm-33m-260-c-21359 Enlace]<br />
|-<br />
| 18/03/2014<br />
| Destornillador cerámico precisión<br />
| DX Dealextreme<br />
| 1,4€<br />
| [http://dx.com/es/p/weitus-pro-ceramic-aligner-tool-6538 Enlace]<br />
|-<br />
| 18/03/2014<br />
| Multímetro decente, [https://www.youtube.com/watch?v=3y5wjaNusr0 Vichy-VC99] (Clon chino Fluke)<br />
| DX Dealextreme<br />
| 27€<br />
| [http://dx.com/es/p/3-0-lcd-handheld-digital-multimeter-voltage-current-resistance-temperature-2-aaa-37082 Enlace]<br />
|-<br />
| 18/03/2014<br />
| Maya de nylon amarilla trenzada, manguito 4mm, 5 metros<br />
| Ebay UK<br />
| 5€<br />
| [http://www.ebay.es/itm/181242472964 Enlace]<br />
|-<br />
| 20/03/2014<br />
| Tira de leds blancos 3528, 60 leds, 1 metro<br />
| Ebay españa<br />
| 3,7€<br />
| [http://www.ebay.es/itm/261415313444 Enlace]<br />
|-<br />
| 20/03/2014<br />
| Servo 9G TOWER PRO SG90 <br />
| Ebay españa<br />
| 5,9€<br />
| [http://www.ebay.es/itm/321334988386 Enlace]<br />
|}<br />
<br />
'''LISTADO COMPLETO GOOGLE DOCS'''<br />
<br />
[https://docs.google.com/spreadsheet/ccc?key=0Av_gWNbO_3opdDE0UzRCTnY0VTUtUmdrT1BhYk5qNGc#gid=0 Listado Google DOCS con enlaces y precios]<br />
<br />
<br />
'''Materiales no comprados (reciclados, etc)'''<br />
<br />
- 3x Rodamiento 608ZZ Abec 7 (Patines)<br />
<br />
- 1x Fuente alimentacion 500W ATX (12V- 28A)<br />
<br />
- 1x Ventilador 40x40mm<br />
<br />
- 1x Ventilador 60x60mm<br />
<br />
- 1x Ventilador 80x80mm<br />
<br />
- 1x Disipador memoria RAM [http://www.guru3d.com/miraserver/images/2009/decade-guru3d/IMG_7078.jpg Hercules GeForce 2 GTS] Partido en trozos para los pololu: [https://lh6.googleusercontent.com/-5eVavMqxExQ/UyArq_JF3pI/AAAAAAAAG5M/zu0y_CLpGGo/w839-h518-no/disipas.jpg Foto Resultado]<br />
<br />
<br />
Última Edición fecha: '''23-03-2014'''<br />
<center>[[File:Stryper-Guitars-Miniature.jpg]]</center><br />
<br />
== '''Mejoras Impresas / Diseñadas''' ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Pieza'''<br />
| '''Material'''<br />
| '''Impreso'''<br />
| '''Diseño propio'''<br />
| '''Tinkerkad'''<br />
| '''Thingverse'''<br />
| '''Observaciones'''<br />
|-<br />
|Tapa Skull para engranage grande<br />
[[File:Skull_gear_lokus.jpg|Tapa calavera engranage grande]]<br />
| ABS plateado<br />
| SI<br />
| SI, '''remix''' desde [http://www.thingiverse.com/thing:49220 Skulltruder]<br />
|[https://tinkercad.com/things/8fBhMLMNT1R-tapa-para-gear '''Enlace''']<br />
|[http://www.thingiverse.com/thing:258657 '''Enlace''']<br />
| Necesario limar, impresa con soportes.<br />
|-<br />
|Estabilizador eje Z prusa i3<br />
[[File:Stryper Mejora Marco.jpg|300px|Estabilizador eje Z prusa i3]]<br />
| ABS Amararillo<br />
| SI<br />
| NO<br />
|<br />
|[http://www.thingiverse.com/thing:100128 Enlace]<br />
| Requiere varillas traseras más largas. Agrega infinita estabilidad <br />
|<br />
|-<br />
|Sujección LM8uu a cama<br />
| ABS Amararillo<br />
| SI<br />
| NO<br />
|<br />
|[http://www.thingiverse.com/thing:57770 Enlace]<br />
| Puede requerir editar la separación de los agujeros <br />
|<br />
|-<br />
|Logo Stryper<br />
[[File:Stryper display large.jpg|300px|Logo Stryper (Mejora visual)]]<br />
| ABS Amararillo<br />
| SI<br />
| SI (vectorizado desde jpg)<br />
|[https://tinkercad.com/things/fJ0ElN03bw9-stryper-logo enlace]<br />
|[http://www.thingiverse.com/thing:262879 Enlace]<br />
| mejora '''visual''' (cero utilidad, solo alegrar el ojo)<br />
|<br />
|-<br />
|Adaptador hotend E3D Fan40mm + brida<br />
[[File:E3D 40mm.jpg|300px|Adaptador hotend E3D Fan40mm + brida]]<br />
| ABS azul<br />
| SI<br />
| SI, remix <br />
|[https://tinkercad.com/things/b9qiHDtoILL-hotend-e3d-v5-apano-ventiladores-40mm-y-sujeccion-brida '''Enlace''']<br />
|[http://www.thingiverse.com/thing:251563 '''Enlace''']<br />
| Puede usarse con un ventilador de 60mm añadiendo un adaptador adicional. <br />
|-<br />
| '''Sujección integral Jonas-E3D Fan40mm'''<br />
[[File:lokusE3d_01.jpg|300px|Sujección integral Jonas-E3D Fan40mm]]<br />
| ABS <br />
| EN CURSO<br />
| SI, remix de 3 o 4<br />
|EN BREVE<br />
|EN BREVE<br />
| Creada para evitar el balanceo del hotend en el eje Y. Proporciona una sujección mayor al extrusor.<br />
<br />
La sujección tradicional coje juego, y termina moviéndose unos mm con la mano / en algunas impresiones<br />
|}<br />
[[File:lokusE3d_02.jpg|300px|Sujección integral Jonas-E3D Fan40mm]]<br />
[[File:lokusE3d_03.jpg|300px|Sujección integral Jonas-E3D Fan40mm]]<br />
<br />
[[Category:Clone wars]]</div>
Lokus77
https://reprap.org/mediawiki/index.php?title=User:Lokus77&diff=121127
User:Lokus77
2014-03-25T11:20:00Z
<p>Lokus77: </p>
<hr />
<div><br />
<center>[[File:Lokus_stryper.jpg|150px]]<br />
'''Contacto''': lokus1977@gmail.com<br />
'''Ubicacion''': Pamplona, Navarra (Spain)<br />
'''Google+''': https://plus.google.com/+LoKuSKus77/<br />
<br />
</center></div>
Lokus77
https://reprap.org/mediawiki/index.php?title=Clone_Wars:_Impresora_Stryper&diff=120928
Clone Wars: Impresora Stryper
2014-03-23T22:37:29Z
<p>Lokus77: /* Compras de material */</p>
<hr />
<div><center><br />
== '''Prusa I3 STRYPER''' ==<br />
[[File:Stryper.jpg|Stryper.jpg]]<br />
</center><br />
<br />
'''Impresora Prusa iteración 3 completa en Negro y Amarillo.''' <br />
Bautizada como Stryper en honor al grupo de Glam / Hard rock americano [http://www.stryper.com/ Stryper] *<br />
<br />
(* Aunque hagan hard rock cristiano y sean unos putos moñas , SI, me gustan, ¡qué pasa!)<br />
<br />
<br />
<br />
'''Premisas:'''<br />
<br />
1.- Montar la impresora con poco dinero. Se han utilizado los componentes más económicos encontrados (cumpliendo la premisa inferior), excepto en el hotend, que se ha preferido invertir más dinero en un Allmetal.<br />
<br />
2.- Para el montaje de la impresora, si existe un componente en negro o en amarillo, se monta.<br />
<br />
Si no existe,'''¡se pinta!''' (Excepto que sea necesariamente de otro color, como las varillas color metal, etc.)<br />
<br />
La idea es que todo sea negro o amarillo, si algún componente plástico es de otro color, es un objeto en pruebas/evolución/mejora.<br />
<br />
3.- Los motores de 2.5A apestan, están mal dimensionados. Se buscaban motores del máximo torque posible comprados en españa, de máximo 1.7A.<br />
<br />
<br />
== Ficha ==<br />
{| class="wikitable" style="width:100%"<br />
|- <br />
| <center>[[File:I3_stryper.jpg|thumb|Impresora Stryper.]]</center><br />
|<br />
* '''Nombre''': '''<font color="#0000FF">Stryper</font>'''<br />
* '''Rango''': Jedi <br />
* '''Familia''': [[Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame |Prusa Mendel Iteration 3]]<br />
* '''Generación''': 7<br />
* '''Material''': Plástico ABS Amarillo. Metacrilato negro 10mm.<br />
* '''Color''': Negro / Amarillo<br />
* '''Electrónica''': [[RAMPS|RAMPS 1.4]]<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Gregs-Jonaskuehling V4<br />
* '''Hot-End''': E3D-v5 3mm<br />
* '''Nacimiento''': 10/02/2014<br />
* '''Impresora Progenitora''': Madre:baru (Sin inscribir), Abuela: jester (Sin inscribir), Bisabuelas: #39, #134,#90<br />
* '''Hijos''': Sin descendencia (por ahora)<br />
* '''Galería ''': [https://plus.google.com/photos/118042097759435445983/albums/5986890523351025217 FOTOS]<br />
| <center></center><br />
|}<br />
<br />
== Cronología ==<br />
* '''28/08/2013''' - Inicio del proyecto.<br />
* Se va pidiendo el material, va llegando...<br />
* '''31/01/2014''' - Llegan los motores. Era lo último imprescindible para funcionar. Ya se puede terminar el montaje!!<br />
* '''01/02/2014''' - Compramos primer rollo de ABS<br />
* '''02/02/2014''' - Primeras pruebas impresión. '''Cubo calibración calidad pasable'''. Monedas calibración y demás pruebas<br />
* '''10/02/2014''' - Se considera impresora como "viva". :) Mejoras en curso....<br />
<br />
== Compras de material ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Compra'''<br />
| '''Material'''<br />
| '''Comprado en'''<br />
| '''Precio(portes incluídos)'''<br />
| '''Observaciones'''<br />
|-<br />
|''' SEPTIEMBRE'''<br />
|-<br />
| 03/09/2013<br />
| 10 Rodamientos LM8UU <br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 10€<br />
|-<br />
| 03/09/2013<br />
| 2 Rodamientos 623ZZ10 <br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 1€<br />
|-<br />
| 03/09/2013<br />
| Kit Tornilleria Prusa I3 single frame (Con muelles M3)<br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 10€<br />
| [http://www.imprimiendoen3d.es/index.php?id_product=17&controller=product&id_lang=1 enlace]<br />
|-<br />
| 03/09/2013<br />
| KIT VARILLAS ROSCADAS Y LISAS PRUSA I3 SINGLE FRAME<br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 22€<br />
| [http://www.imprimiendoen3d.es/index.php?id_product=20&controller=product&id_lang=1 enlace]<br />
|-<br />
| 03/09/2013<br />
| Marco Metacrilato 10mm Negro<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 40+7€<br />
|[https://11094530530805020601.googlegroups.com/attach/22e38efead88a7d6/marcoNegro.jpg?view=1&part=5 Foto]<br />
|-<br />
| 03/09/2013<br />
| 2 Poleas T2.5<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 4€<br />
|-<br />
| 03/09/2013<br />
| 2 Termistores cama Epcos 100k<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Kit piezas amarillas by Baru<br />
| Baru<br />
| Donación <br />
| [https://lh4.googleusercontent.com/-8wo9FfWgBGo/Ui5NldSUwtI/AAAAAAABLkQ/LvINckJW4K0/w927-h696-no/2013-09-09 foto]<br />
|-<br />
| 10/09/2013<br />
| Correa GT2.5 2x1m<br />
| Baru<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Espejo Ikea 20x20<br />
| Baru<br />
| Regalo<br />
|-<br />
|'''NOVIEMBRE'''<br />
|-<br />
| 07/11/2013<br />
| Hobbed Bolt M8<br />
| [http://www.ebay.es/usr/jesmar_zgz Jesmar_Zgz (ebay)]<br />
| 5,5€<br />
| [http://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/xi8AAOxyKsZRr0to/$T2eC16R,!ykE9s7t%29d!SBRr0tn3vLw~~60_57.JPG Foto]<br />
|-<br />
| 07/11/2013<br />
| Arduino SainSmart Mega2560 R3 '''Negro'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 13,7€<br />
| [http://www.ebay.es/itm/SainSmart-Mega2560-R3-ATmega2560-16AU-ATMEGA16U2-USB-Cable-For-Arduino-2013-/271187169712 enlace]<br />
|-<br />
| 07/11/2013<br />
| Heatbed SainSmart MK2B '''Negra'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 12,9€<br />
| [http://www.ebay.com/itm/SainSmart-MK2B-Heat-Bed-Heatbed-Hot-Plate-For-RepRap-Mendel-Prusa-3D-Printer-/121171627059 enlace]<br />
|-<br />
| 07/11/2013<br />
| Ramps 1.4<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 11,6€<br />
| [http://www.ebay.es/itm/3D-Printer-Controller-for-RAMPS-1-4-REPRAP-MENDEL-PRUSA-for-Arduino-/310699832639 enlace]<br />
|-<br />
| 07/11/2013<br />
| [http://i.ebayimg.com/00/s/NTk4WDYwMw==/z/GPQAAOxyrxZR2o5V/$%28KGrHqF,!ocFG6JtsySfBR2o5U6vnQ~~60_12.JPG 5 StepStick A4988 3D]<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 14,4€<br />
| [http://www.ebay.es/itm/5PCS-StepStick-Stepper-motor-driver-A4988-3D-Printer-driver-module-Reprap-Prus-/400525154696 enlace]<br />
|-<br />
| 07/11/2013<br />
| [https://lh6.googleusercontent.com/-2wXcZWexoec/UqZlmrQtoaI/AAAAAAAAFz0/786ZDUn-17U/w927-h696-no/DSCN0167.JPG 3 Endstops Mecánico con Led]<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 8€<br />
| [http://www.ebay.es/itm/Mech-Endstop-Switch-Kit-for-CNC-3D-Printer-RepRap-Makerbot-Prusa-Mendel-RAMPS1-4-/200950337317 enlace]<br />
|-<br />
| 07/11/2013<br />
| 10 tiras de 40 pines<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 1,2€<br />
| [http://www.ebay.es/itm/10PCS-40Pin-2-54mm-Single-Row-Straight-Male-Pin-Header-Strip-PBC-Ardunio-/180974247480 enlace]<br />
|-<br />
| 07/11/2013<br />
| 40 cables dupont de 20cm<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 1,6€<br />
| [http://www.ebay.es/itm/40PCS-Dupont-wire-jumpercables-20cm-2-54MM-male-to-female-1P-1P-For-Arduino-/181011986500 enlace]<br />
|-<br />
| 26/11/2013<br />
| Calibre Digital chino<br />
| [http://www.ebay.com/usr/hkiron-my Hkyron-my (ebay)]<br />
| 7,7€<br />
| [http://www.ebay.com/itm/Electric-6-Stainless-Steel-Digital-Vernier-Dial-Caliper-Gauge-Micro-Meter-GOOD-/290897280812 enlace]<br />
|-<br />
| 28/11/2013<br />
| Pegamento térmico disipadores<br />
| [http://www.ebay.es/usr/qqlinkys2009 qqlinkys2009 (ebay)]<br />
| 1€<br />
| [http://www.ebay.es/itm/Grasa-de-Silicona-Thermal-Compound-Glue-Heatsink-Plaster-STARS-922-para-CPU-GPU-/291093278661 enlace]<br />
|-<br />
|FOTO ELECTRONICA<br />
|[https://lh4.googleusercontent.com/-YESqsEQPlMI/UqZiY8DWwzI/AAAAAAAAFxI/Q-_juGrK4rc/w927-h696-no/DSCN0138.JPG Pedido Ebay China Electrónica]<br />
|-<br />
| 29/11/2013<br />
| Hotend E3D V5 3mm Direct Extrusion<br />
| [http://e3d-online.com/E3D-HotEnds/E3D-DirectFeed-HotEnds/E3D-V5-3mm-Direct-All-Metal-HotEnd E3D-Online]<br />
| 68€ (57£)<br />
| [https://lh5.googleusercontent.com/-JOd7ZUCCD6M/UqZkr_2DpwI/AAAAAAAAFyg/18sSCYtIhBM/w927-h696-no/DSCN0154.JPG Foto]<br />
|-<br />
|'''ENERO'''<br />
|-<br />
| 26/01/2014<br />
| [https://lh3.googleusercontent.com/-Tby4Im_MRW4/UwHygr-8-uI/AAAAAAAAGPA/UiGzL8tT9aI/w881-h647-no/motores2.jpg 5 X Motor '''TB42HT47-1684AC''' Nema17 Torque 4.4kg/cm, 1.68A]<br />
| [http://store.thingibox.com/es/motores/27-stepper_nema17.html#/tipo-un_eje_p_n_tb42ht47_1684ac Thingibox]<br />
| 70€ (65+5)<br />
| Cable 70cm. Incluye conectores<br />
|-<br />
|'''FEBRERO'''<br />
|-<br />
| 04/02/2014<br />
| Grasa de Litio (500gr)<br />
| Amazon<br />
| 7,5€<br />
| [http://www.amazon.es/dp/B002E2QM6S Enlace]<br />
|-<br />
| 25/02/2014<br />
| 2 acopladores flexibles 5x5mm<br />
| José Castrillo (Clone wars) albazetech3d@gmail.com<br />
| 6€ (2x 2.5€ + 1€ correos)<br />
|-<br />
|'''MARZO'''<br />
|-<br />
| 18/03/2014<br />
| Cinta Kapton 24mm Rollo 33metros<br />
| DX Dealextreme<br />
| 3,77€<br />
| [http://dx.com/es/p/polyimide-heat-resistant-high-temperature-adhesive-tape-24mm-33m-260-c-21359 Enlace]<br />
|-<br />
| 18/03/2014<br />
| Destornillador cerámico precisión<br />
| DX Dealextreme<br />
| 1,4€<br />
| [http://dx.com/es/p/weitus-pro-ceramic-aligner-tool-6538 Enlace]<br />
|-<br />
| 18/03/2014<br />
| Multímetro decente, [https://www.youtube.com/watch?v=3y5wjaNusr0 Vichy-VC99] (Clon chino Fluke)<br />
| DX Dealextreme<br />
| 27€<br />
| [http://dx.com/es/p/3-0-lcd-handheld-digital-multimeter-voltage-current-resistance-temperature-2-aaa-37082 Enlace]<br />
|-<br />
| 18/03/2014<br />
| Maya de nylon amarilla trenzada, manguito 4mm, 5 metros<br />
| Ebay UK<br />
| 5€<br />
| [http://www.ebay.es/itm/181242472964 Enlace]<br />
|-<br />
| 20/03/2014<br />
| Tira de leds blancos 3528, 60 leds, 1 metro<br />
| Ebay españa<br />
| 3,7€<br />
| [http://www.ebay.es/itm/261415313444 Enlace]<br />
|-<br />
| 20/03/2014<br />
| Servo 9G TOWER PRO SG90 <br />
| Ebay españa<br />
| 5,9€<br />
| [http://www.ebay.es/itm/321334988386 Enlace]<br />
|}<br />
<br />
'''LISTADO COMPLETO GOOGLE DOCS'''<br />
<br />
[https://docs.google.com/spreadsheet/ccc?key=0Av_gWNbO_3opdDE0UzRCTnY0VTUtUmdrT1BhYk5qNGc#gid=0 Listado Google DOCS con enlaces y precios]<br />
<br />
<br />
'''Materiales no comprados (reciclados, etc)'''<br />
<br />
- 3x Rodamiento 608ZZ Abec 7 (Patines)<br />
<br />
- 1x Fuente alimentacion 500W ATX (12V- 28A)<br />
<br />
- 1x Ventilador 40x40mm<br />
<br />
- 1x Ventilador 60x60mm<br />
<br />
- 1x Ventilador 80x80mm<br />
<br />
- 1x Disipador memoria RAM [http://www.guru3d.com/miraserver/images/2009/decade-guru3d/IMG_7078.jpg Hercules GeForce 2 GTS] Partido en trozos para los pololu: [https://lh6.googleusercontent.com/-5eVavMqxExQ/UyArq_JF3pI/AAAAAAAAG5M/zu0y_CLpGGo/w839-h518-no/disipas.jpg Foto Resultado]<br />
<br />
<br />
Última Edición fecha: '''23-03-2014'''<br />
<center>[[File:Stryper-Guitars-Miniature.jpg]]</center><br />
<br />
== '''Mejoras Impresas / Diseñadas''' ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Pieza'''<br />
| '''Material'''<br />
| '''Impreso'''<br />
| '''Diseño propio'''<br />
| '''Tinkerkad'''<br />
| '''Thingverse'''<br />
| '''Observaciones'''<br />
|-<br />
|Tapa Skull para engranage grande<br />
[[File:Skull_gear_lokus.jpg|Tapa calavera engranage grande]]<br />
| ABS plateado<br />
| SI<br />
| SI, '''remix''' desde [http://www.thingiverse.com/thing:49220 Skulltruder]<br />
|[https://tinkercad.com/things/8fBhMLMNT1R-tapa-para-gear '''Enlace''']<br />
|[http://www.thingiverse.com/thing:258657 '''Enlace''']<br />
| Necesario limar, impresa con soportes.<br />
|-<br />
|Estabilizador eje Z prusa i3<br />
[[File:Stryper Mejora Marco.jpg|300px|Estabilizador eje Z prusa i3]]<br />
| ABS Amararillo<br />
| SI<br />
| NO<br />
|<br />
|[http://www.thingiverse.com/thing:100128 Enlace]<br />
| Requiere varillas traseras más largas. Agrega infinita estabilidad <br />
|<br />
|-<br />
|Sujección LM8uu a cama<br />
| ABS Amararillo<br />
| SI<br />
| NO<br />
|<br />
|[http://www.thingiverse.com/thing:57770 Enlace]<br />
| Puede requerir editar la separación de los agujeros <br />
|<br />
|-<br />
|Logo Stryper<br />
[[File:Stryper display large.jpg|300px|Logo Stryper (Mejora visual)]]<br />
| ABS Amararillo<br />
| SI<br />
| SI (vectorizado desde jpg)<br />
|[https://tinkercad.com/things/fJ0ElN03bw9-stryper-logo enlace]<br />
|[http://www.thingiverse.com/thing:262879 Enlace]<br />
| mejora '''visual''' (cero utilidad, solo alegrar el ojo)<br />
|<br />
|-<br />
|Adaptador hotend E3D Fan40mm + brida<br />
[[File:E3D 40mm.jpg|300px|Adaptador hotend E3D Fan40mm + brida]]<br />
| ABS azul<br />
| SI<br />
| SI, remix <br />
|[https://tinkercad.com/things/b9qiHDtoILL-hotend-e3d-v5-apano-ventiladores-40mm-y-sujeccion-brida '''Enlace''']<br />
|[http://www.thingiverse.com/thing:251563 '''Enlace''']<br />
| Puede usarse con un ventilador de 60mm añadiendo un adaptador adicional. <br />
|-<br />
| '''Sujección integral Jonas-E3D Fan40mm'''<br />
[[File:lokusE3d_01.jpg|300px|Sujección integral Jonas-E3D Fan40mm]]<br />
| ABS <br />
| EN CURSO<br />
| SI, remix de 3 o 4<br />
|EN BREVE<br />
|EN BREVE<br />
| Creada para evitar el balanceo del hotend en el eje Y. Proporciona una sujección mayor al extrusor.<br />
<br />
La sujección tradicional coje juego, y termina moviéndose unos mm con la mano / en algunas impresiones<br />
|}<br />
[[File:lokusE3d_02.jpg|300px|Sujección integral Jonas-E3D Fan40mm]]<br />
[[File:lokusE3d_03.jpg|300px|Sujección integral Jonas-E3D Fan40mm]]<br />
<br />
[[Category:Clone wars]]</div>
Lokus77
https://reprap.org/mediawiki/index.php?title=Clone_Wars:_Impresora_Stryper&diff=119739
Clone Wars: Impresora Stryper
2014-03-12T10:13:38Z
<p>Lokus77: </p>
<hr />
<div><center><br />
== '''Prusa I3 STRYPER''' ==<br />
[[File:Stryper.jpg|Stryper.jpg]]<br />
</center><br />
<br />
'''Impresora Prusa iteración 3 completa en Negro y Amarillo.''' <br />
Bautizada como Stryper en honor al grupo de Glam / Hard rock americano [http://www.stryper.com/ Stryper] *<br />
<br />
(* Aunque hagan hard rock cristiano y sean unos putos moñas , SI, me gustan, ¡qué pasa!)<br />
<br />
<br />
<br />
'''Premisas:'''<br />
<br />
1.- Montar la impresora con poco dinero. Se han utilizado los componentes más económicos encontrados (cumpliendo la premisa inferior), excepto en el hotend, que se ha preferido invertir más dinero en un Allmetal.<br />
<br />
2.- Para el montaje de la impresora, si existe un componente en negro o en amarillo, se monta.<br />
<br />
Si no existe,'''¡se pinta!''' (Excepto que sea necesariamente de otro color, como las varillas color metal, etc.)<br />
<br />
La idea es que todo sea negro o amarillo, si algún componente plástico es de otro color, es un objeto en pruebas/evolución/mejora.<br />
<br />
3.- Los motores de 2.5A apestan, están mal dimensionados. Se buscaban motores del máximo torque posible comprados en españa, de máximo 1.7A.<br />
<br />
<br />
== Ficha ==<br />
{| class="wikitable" style="width:100%"<br />
|- <br />
| <center>[[File:I3_stryper.jpg|thumb|Impresora Stryper.]]</center><br />
|<br />
* '''Nombre''': '''<font color="#0000FF">Stryper</font>'''<br />
* '''Rango''': Jedi <br />
* '''Familia''': [[Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame |Prusa Mendel Iteration 3]]<br />
* '''Generación''': 7<br />
* '''Material''': Plástico ABS Amarillo. Metacrilato negro 10mm.<br />
* '''Color''': Negro / Amarillo<br />
* '''Electrónica''': [[RAMPS|RAMPS 1.4]]<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Gregs-Jonaskuehling V4<br />
* '''Hot-End''': E3D-v5 3mm<br />
* '''Nacimiento''': 10/02/2014<br />
* '''Impresora Progenitora''': Madre:baru (Sin inscribir), Abuela: jester (Sin inscribir), Bisabuelas: #39, #134,#90<br />
* '''Hijos''': Sin descendencia (por ahora)<br />
* '''Galería ''': [https://plus.google.com/photos/118042097759435445983/albums/5986890523351025217 FOTOS]<br />
| <center></center><br />
|}<br />
<br />
== Cronología ==<br />
* '''28/08/2013''' - Inicio del proyecto.<br />
* Se va pidiendo el material, va llegando...<br />
* '''31/01/2014''' - Llegan los motores. Era lo último imprescindible para funcionar. Ya se puede terminar el montaje!!<br />
* '''01/02/2014''' - Compramos primer rollo de ABS<br />
* '''02/02/2014''' - Primeras pruebas impresión. '''Cubo calibración calidad pasable'''. Monedas calibración y demás pruebas<br />
* '''10/02/2014''' - Se considera impresora como "viva". :) Mejoras en curso....<br />
<br />
== Compras de material ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Compra'''<br />
| '''Material'''<br />
| '''Comprado en'''<br />
| '''Precio(portes incluídos)'''<br />
| '''Observaciones'''<br />
|-<br />
|''' SEPTIEMBRE'''<br />
|-<br />
| 03/09/2013<br />
| 10 Rodamientos LM8UU <br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 10€<br />
|-<br />
| 03/09/2013<br />
| 2 Rodamientos 623ZZ10 <br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 1€<br />
|-<br />
| 03/09/2013<br />
| Kit Tornilleria Prusa I3 single frame (Con muelles M3)<br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 10€<br />
| [http://www.imprimiendoen3d.es/index.php?id_product=17&controller=product&id_lang=1 enlace]<br />
|-<br />
| 03/09/2013<br />
| KIT VARILLAS ROSCADAS Y LISAS PRUSA I3 SINGLE FRAME<br />
| [http://www.imprimiendoen3d.es/ Imprimiendoen3d.es]<br />
| 22€<br />
| [http://www.imprimiendoen3d.es/index.php?id_product=20&controller=product&id_lang=1 enlace]<br />
|-<br />
| 03/09/2013<br />
| Marco Metacrilato 10mm Negro<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 40+7€<br />
|[https://11094530530805020601.googlegroups.com/attach/22e38efead88a7d6/marcoNegro.jpg?view=1&part=5 Foto]<br />
|-<br />
| 03/09/2013<br />
| 2 Poleas T2.5<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 4€<br />
|-<br />
| 03/09/2013<br />
| 2 Termistores cama Epcos 100k<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Kit piezas amarillas by Baru<br />
| Baru<br />
| Donación <br />
| [https://lh4.googleusercontent.com/-8wo9FfWgBGo/Ui5NldSUwtI/AAAAAAABLkQ/LvINckJW4K0/w927-h696-no/2013-09-09 foto]<br />
|-<br />
| 10/09/2013<br />
| Correa GT2.5 2x1m<br />
| Baru<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Espejo Ikea 20x20<br />
| Baru<br />
| Regalo<br />
|-<br />
|'''NOVIEMBRE'''<br />
|-<br />
| 07/11/2013<br />
| Hobbed Bolt M8<br />
| [http://www.ebay.es/usr/jesmar_zgz Jesmar_Zgz (ebay)]<br />
| 5,5€<br />
| [http://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/xi8AAOxyKsZRr0to/$T2eC16R,!ykE9s7t%29d!SBRr0tn3vLw~~60_57.JPG Foto]<br />
|-<br />
| 07/11/2013<br />
| Arduino SainSmart Mega2560 R3 '''Negro'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 13,7€<br />
| [http://www.ebay.es/itm/SainSmart-Mega2560-R3-ATmega2560-16AU-ATMEGA16U2-USB-Cable-For-Arduino-2013-/271187169712 enlace]<br />
|-<br />
| 07/11/2013<br />
| Heatbed SainSmart MK2B '''Negra'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 12,9€<br />
| [http://www.ebay.com/itm/SainSmart-MK2B-Heat-Bed-Heatbed-Hot-Plate-For-RepRap-Mendel-Prusa-3D-Printer-/121171627059 enlace]<br />
|-<br />
| 07/11/2013<br />
| Ramps 1.4<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 11,6€<br />
| [http://www.ebay.es/itm/3D-Printer-Controller-for-RAMPS-1-4-REPRAP-MENDEL-PRUSA-for-Arduino-/310699832639 enlace]<br />
|-<br />
| 07/11/2013<br />
| [http://i.ebayimg.com/00/s/NTk4WDYwMw==/z/GPQAAOxyrxZR2o5V/$%28KGrHqF,!ocFG6JtsySfBR2o5U6vnQ~~60_12.JPG 5 StepStick A4988 3D]<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 14,4€<br />
| [http://www.ebay.es/itm/5PCS-StepStick-Stepper-motor-driver-A4988-3D-Printer-driver-module-Reprap-Prus-/400525154696 enlace]<br />
|-<br />
| 07/11/2013<br />
| [https://lh6.googleusercontent.com/-2wXcZWexoec/UqZlmrQtoaI/AAAAAAAAFz0/786ZDUn-17U/w927-h696-no/DSCN0167.JPG 3 Endstops Mecánico con Led]<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 8€<br />
| [http://www.ebay.es/itm/Mech-Endstop-Switch-Kit-for-CNC-3D-Printer-RepRap-Makerbot-Prusa-Mendel-RAMPS1-4-/200950337317 enlace]<br />
|-<br />
| 07/11/2013<br />
| 10 tiras de 40 pines<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 1,2€<br />
| [http://www.ebay.es/itm/10PCS-40Pin-2-54mm-Single-Row-Straight-Male-Pin-Header-Strip-PBC-Ardunio-/180974247480 enlace]<br />
|-<br />
| 07/11/2013<br />
| 40 cables dupont de 20cm<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 1,6€<br />
| [http://www.ebay.es/itm/40PCS-Dupont-wire-jumpercables-20cm-2-54MM-male-to-female-1P-1P-For-Arduino-/181011986500 enlace]<br />
|-<br />
| 26/11/2013<br />
| Calibre Digital chino<br />
| [http://www.ebay.com/usr/hkiron-my Hkyron-my (ebay)]<br />
| 7,7€<br />
| [http://www.ebay.com/itm/Electric-6-Stainless-Steel-Digital-Vernier-Dial-Caliper-Gauge-Micro-Meter-GOOD-/290897280812 enlace]<br />
|-<br />
| 28/11/2013<br />
| Pegamento térmico disipadores<br />
| [http://www.ebay.es/usr/qqlinkys2009 qqlinkys2009 (ebay)]<br />
| 1€<br />
| [http://www.ebay.es/itm/Grasa-de-Silicona-Thermal-Compound-Glue-Heatsink-Plaster-STARS-922-para-CPU-GPU-/291093278661 enlace]<br />
|-<br />
|FOTO ELECTRONICA<br />
|[https://lh4.googleusercontent.com/-YESqsEQPlMI/UqZiY8DWwzI/AAAAAAAAFxI/Q-_juGrK4rc/w927-h696-no/DSCN0138.JPG Pedido Ebay China Electrónica]<br />
|-<br />
| 29/11/2013<br />
| Hotend E3D V5 3mm Direct Extrusion<br />
| [http://e3d-online.com/E3D-HotEnds/E3D-DirectFeed-HotEnds/E3D-V5-3mm-Direct-All-Metal-HotEnd E3D-Online]<br />
| 68€ (57£)<br />
| [https://lh5.googleusercontent.com/-JOd7ZUCCD6M/UqZkr_2DpwI/AAAAAAAAFyg/18sSCYtIhBM/w927-h696-no/DSCN0154.JPG Foto]<br />
|-<br />
|'''ENERO'''<br />
|-<br />
| 26/01/2014<br />
| [https://lh3.googleusercontent.com/-Tby4Im_MRW4/UwHygr-8-uI/AAAAAAAAGPA/UiGzL8tT9aI/w881-h647-no/motores2.jpg 5 X Motor '''TB42HT47-1684AC''' Nema17 Torque 4.4kg/cm, 1.68A]<br />
| [http://store.thingibox.com/es/motores/27-stepper_nema17.html#/tipo-un_eje_p_n_tb42ht47_1684ac Thingibox]<br />
| 70€ (65+5)<br />
| Cable 70cm. Incluye conectores<br />
|-<br />
|'''FEBRERO'''<br />
|-<br />
| 04/02/2014<br />
| Grasa de Litio (500gr)<br />
| Amazon<br />
| 7,5€<br />
| [http://www.amazon.es/dp/B002E2QM6S Enlace]<br />
|-<br />
| 25/02/2014<br />
| 2 acopladores flexibles 5x5mm<br />
| José Castrillo (Clone wars) albazetech3d@gmail.com<br />
| 6€ (2x 2.5€ + 1€ correos)<br />
| Pendientes recibir... Correos SUX<br />
|}<br />
<br />
'''LISTADO COMPLETO GOOGLE DOCS'''<br />
<br />
[https://docs.google.com/spreadsheet/ccc?key=0Av_gWNbO_3opdDE0UzRCTnY0VTUtUmdrT1BhYk5qNGc#gid=0 Listado Google DOCS con enlaces y precios]<br />
<br />
<br />
'''Materiales no comprados (reciclados, etc)'''<br />
<br />
- 3x Rodamiento 608ZZ Abec 7 (Patines)<br />
<br />
- 1x Fuente alimentacion 500W ATX (12V- 28A)<br />
<br />
- 1x Ventilador 40x40mm<br />
<br />
- 1x Ventilador 60x60mm<br />
<br />
- 1x Ventilador 80x80mm<br />
<br />
- 1x Disipador memoria RAM [http://www.guru3d.com/miraserver/images/2009/decade-guru3d/IMG_7078.jpg Hercules GeForce 2 GTS] Partido en trozos para los pololu: [https://lh6.googleusercontent.com/-5eVavMqxExQ/UyArq_JF3pI/AAAAAAAAG5M/zu0y_CLpGGo/w839-h518-no/disipas.jpg Foto Resultado]<br />
<br />
<center>[[File:Stryper-Guitars-Miniature.jpg]]</center><br />
<br />
<br />
== '''Mejoras Impresas / Diseñadas''' ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Pieza'''<br />
| '''Material'''<br />
| '''Impreso'''<br />
| '''Diseño propio'''<br />
| '''Tinkerkad'''<br />
| '''Thingverse'''<br />
| '''Observaciones'''<br />
|-<br />
|Tapa Skull para engranage grande<br />
[[File:Skull_gear_lokus.jpg|Tapa calavera engranage grande]]<br />
| ABS plateado<br />
| SI<br />
| SI, '''remix''' desde [http://www.thingiverse.com/thing:49220 Skulltruder]<br />
|[https://tinkercad.com/things/8fBhMLMNT1R-tapa-para-gear '''Enlace''']<br />
|[http://www.thingiverse.com/thing:258657 '''Enlace''']<br />
| Necesario limar, impresa con soportes.<br />
|-<br />
|Estabilizador eje Z prusa i3<br />
[[File:Stryper Mejora Marco.jpg|300px|Estabilizador eje Z prusa i3]]<br />
| ABS Amararillo<br />
| SI<br />
| NO<br />
|<br />
|[http://www.thingiverse.com/thing:100128 Enlace]<br />
| Requiere varillas traseras más largas. Agrega infinita estabilidad <br />
|<br />
|-<br />
|Sujección LM8uu a cama<br />
| ABS Amararillo<br />
| SI<br />
| NO<br />
|<br />
|[http://www.thingiverse.com/thing:57770 Enlace]<br />
| Puede requerir editar la separación de los agujeros <br />
|<br />
|-<br />
|Logo Stryper<br />
[[File:Stryper display large.jpg|300px|Logo Stryper (Mejora visual)]]<br />
| ABS Amararillo<br />
| SI<br />
| SI (vectorizado desde jpg)<br />
|[https://tinkercad.com/things/fJ0ElN03bw9-stryper-logo enlace]<br />
|[http://www.thingiverse.com/thing:262879 Enlace]<br />
| mejora '''visual''' (cero utilidad, solo alegrar el ojo)<br />
|<br />
|-<br />
|Adaptador hotend E3D Fan40mm + brida<br />
[[File:E3D 40mm.jpg|300px|Adaptador hotend E3D Fan40mm + brida]]<br />
| ABS azul<br />
| SI<br />
| SI, remix <br />
|[https://tinkercad.com/things/b9qiHDtoILL-hotend-e3d-v5-apano-ventiladores-40mm-y-sujeccion-brida '''Enlace''']<br />
|[http://www.thingiverse.com/thing:251563 '''Enlace''']<br />
| Puede usarse con un ventilador de 60mm añadiendo un adaptador adicional. <br />
|-<br />
| '''Sujección integral Jonas-E3D Fan40mm'''<br />
[[File:lokusE3d_01.jpg|300px|Sujección integral Jonas-E3D Fan40mm]]<br />
| ABS <br />
| EN CURSO<br />
| SI, remix de 3 o 4<br />
|EN BREVE<br />
|EN BREVE<br />
| Creada para evitar el balanceo del hotend en el eje Y. Proporciona una sujección mayor al extrusor.<br />
<br />
La sujección tradicional coje juego, y termina moviéndose unos mm con la mano / en algunas impresiones<br />
|}<br />
[[File:lokusE3d_02.jpg|300px|Sujección integral Jonas-E3D Fan40mm]]<br />
[[File:lokusE3d_03.jpg|300px|Sujección integral Jonas-E3D Fan40mm]]</div>
Lokus77
https://reprap.org/mediawiki/index.php?title=File:Stryper_display_large.jpg&diff=119737
File:Stryper display large.jpg
2014-03-12T10:08:03Z
<p>Lokus77: </p>
<hr />
<div></div>
Lokus77
https://reprap.org/mediawiki/index.php?title=File:LokusE3d_03.jpg&diff=119736
File:LokusE3d 03.jpg
2014-03-12T10:01:38Z
<p>Lokus77: </p>
<hr />
<div></div>
Lokus77
https://reprap.org/mediawiki/index.php?title=File:LokusE3d_02.jpg&diff=119735
File:LokusE3d 02.jpg
2014-03-12T10:00:55Z
<p>Lokus77: </p>
<hr />
<div></div>
Lokus77
https://reprap.org/mediawiki/index.php?title=File:LokusE3d_01.jpg&diff=119734
File:LokusE3d 01.jpg
2014-03-12T10:00:33Z
<p>Lokus77: </p>
<hr />
<div></div>
Lokus77
https://reprap.org/mediawiki/index.php?title=Clone_Wars:_Impresora_Stryper&diff=119733
Clone Wars: Impresora Stryper
2014-03-12T07:12:31Z
<p>Lokus77: </p>
<hr />
<div><center><br />
== '''Prusa I3 STRYPER''' ==<br />
[[File:Stryper.jpg|Stryper.jpg]]<br />
</center><br />
<br />
'''Impresora Prusa iteración 3 completa en Negro y Amarillo.''' <br />
Bautizada como Stryper en honor al grupo de Glam / Hard rock americano [http://www.stryper.com/ Stryper] *<br />
<br />
(* Aunque hagan hard rock cristiano y sean unos putos moñas , SI, me gustan, ¡qué pasa!)<br />
<br />
<br />
<br />
'''Premisas:'''<br />
<br />
1.- Montar la impresora con poco dinero. Se han utilizado los componentes más económicos encontrados (cumpliendo la premisa inferior), excepto en el hotend, que se ha preferido invertir más dinero en un Allmetal.<br />
2.- Para el montaje de la impresora, si existe un componente en negro o en amarillo, se monta.<br />
Si no existe,'''¡se pinta!''' (Excepto que sea necesariamente de otro color, como las varillas color metal, etc.<br />
3.- Los motores de 2.5A apestan, están mal dimensionados. Se buscaban motores del máximo torque posible comprados en españa, de máximo 1.7A.<br />
<br />
== Ficha ==<br />
{| class="wikitable" style="width:100%"<br />
|- <br />
| <center>[[File:I3_stryper.jpg|thumb|Impresora Stryper.]]</center><br />
|<br />
* '''Nombre''': '''<font color="#0000FF">Stryper</font>'''<br />
* '''Rango''': Jedi <br />
* '''Familia''': [[Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame |Prusa Mendel Iteration 3]]<br />
* '''Generación''': 7<br />
* '''Material''': Plástico ABS Amarillo. Metacrilato negro 10mm.<br />
* '''Color''': Negro / Amarillo<br />
* '''Electrónica''': [[RAMPS|RAMPS 1.4]]<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Gregs-Jonaskuehling V4<br />
* '''Hot-End''': E3D-v5 3mm<br />
* '''Nacimiento''': 10/02/2014<br />
* '''Impresora Progenitora''': Madre:baru (Sin inscribir), Abuela: jester (Sin inscribir), Bisabuelas: #39, #134,#90<br />
* '''Hijos''': Sin descendencia (por ahora)<br />
* '''Galería ''': [https://plus.google.com/photos/118042097759435445983/albums/5986890523351025217 FOTOS]<br />
| <center></center><br />
|}<br />
<br />
== Cronología ==<br />
* '''28/08/2013''' - Inicio del proyecto.<br />
* Se va pidiendo el material, va llegando...<br />
* '''31/01/2014''' - Llegan los motores. Era lo último imprescindible para funcionar. Ya se puede terminar el montaje!!<br />
* '''01/02/2014''' - Compramos primer rollo de ABS<br />
* '''02/02/2014''' - Primeras pruebas impresión. '''Cubo calibración calidad pasable'''. Monedas calibración y demás pruebas<br />
* '''10/02/2014''' - Se considera impresora como "viva". :) Mejoras en curso....<br />
<br />
== Compras de material ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Compra'''<br />
| '''Material'''<br />
| '''Comprado en'''<br />
| '''Precio(portes incluídos)'''<br />
| '''Observaciones'''<br />
|-<br />
|''' SEPTIEMBRE'''<br />
|-<br />
| 03/09/2013<br />
| 10 Rodamientos LM8UU <br />
| Imprimiendoen3d.es<br />
| 10€<br />
| 03/09/2013<br />
| 2 Rodamientos 623ZZ10 <br />
| Imprimiendoen3d.es<br />
| 1€<br />
|-<br />
| 03/09/2013<br />
| Kit Tornilleria Prusa I3 single frame (Con muelles M3)<br />
| Imprimiendoen3d.es<br />
| 10€<br />
|-<br />
| 03/09/2013<br />
| KIT VARILLAS ROSCADAS Y LISAS PRUSA I3 SINGLE FRAME<br />
| Imprimiendoen3d.es<br />
| 22€<br />
|-<br />
| 03/09/2013<br />
| Marco Metacrilato 10mm Negro<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 40+7€<br />
|[https://11094530530805020601.googlegroups.com/attach/22e38efead88a7d6/marcoNegro.jpg?view=1&part=5 Foto]<br />
|-<br />
| 03/09/2013<br />
| 2 Poleas T2.5<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 4€<br />
|-<br />
| 03/09/2013<br />
| 2 Termistores cama Epcos 100k<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Kit piezas amarillas by Baru<br />
| Baru<br />
| Donación <br />
| [https://lh4.googleusercontent.com/-8wo9FfWgBGo/Ui5NldSUwtI/AAAAAAABLkQ/LvINckJW4K0/w927-h696-no/2013-09-09 foto]<br />
|-<br />
| 10/09/2013<br />
| Correa GT2.5 2x1m<br />
| Baru<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Espejo Ikea 20x20<br />
| Baru<br />
| Regalo<br />
|-<br />
|'''NOVIEMBRE'''<br />
|-<br />
| 07/11/2013<br />
| Hobbed Bolt M8<br />
| [http://www.ebay.es/usr/jesmar_zgz Jesmar_Zgz (ebay)]<br />
| 5,5€<br />
| [http://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/xi8AAOxyKsZRr0to/$T2eC16R,!ykE9s7t%29d!SBRr0tn3vLw~~60_57.JPG Foto]<br />
|-<br />
| 07/11/2013<br />
| Arduino SainSmart Mega2560 R3 '''Negro'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 13,7€<br />
| [http://www.ebay.es/itm/SainSmart-Mega2560-R3-ATmega2560-16AU-ATMEGA16U2-USB-Cable-For-Arduino-2013-/271187169712 enlace]<br />
|-<br />
| 07/11/2013<br />
| Heatbed SainSmart MK2B '''Negra'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 12,9€<br />
| [http://www.ebay.com/itm/SainSmart-MK2B-Heat-Bed-Heatbed-Hot-Plate-For-RepRap-Mendel-Prusa-3D-Printer-/121171627059 enlace]<br />
|-<br />
| 07/11/2013<br />
| Ramps 1.4<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 11,6€<br />
| [http://www.ebay.es/itm/3D-Printer-Controller-for-RAMPS-1-4-REPRAP-MENDEL-PRUSA-for-Arduino-/310699832639 enlace]<br />
|-<br />
| 07/11/2013<br />
| [http://i.ebayimg.com/00/s/NTk4WDYwMw==/z/GPQAAOxyrxZR2o5V/$%28KGrHqF,!ocFG6JtsySfBR2o5U6vnQ~~60_12.JPG 5 StepStick A4988 3D]<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 14,4€<br />
| [http://www.ebay.es/itm/5PCS-StepStick-Stepper-motor-driver-A4988-3D-Printer-driver-module-Reprap-Prus-/400525154696 enlace]<br />
|-<br />
| 07/11/2013<br />
| [https://lh6.googleusercontent.com/-2wXcZWexoec/UqZlmrQtoaI/AAAAAAAAFz0/786ZDUn-17U/w927-h696-no/DSCN0167.JPG 3 Endstops Mecánico con Led]<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 8€<br />
| [http://www.ebay.es/itm/Mech-Endstop-Switch-Kit-for-CNC-3D-Printer-RepRap-Makerbot-Prusa-Mendel-RAMPS1-4-/200950337317 enlace]<br />
|-<br />
| 07/11/2013<br />
| 10 tiras de 40 pines<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 1,2€<br />
| [http://www.ebay.es/itm/10PCS-40Pin-2-54mm-Single-Row-Straight-Male-Pin-Header-Strip-PBC-Ardunio-/180974247480 enlace]<br />
|-<br />
| 07/11/2013<br />
| 40 cables dupont de 20cm<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 1,6€<br />
| [http://www.ebay.es/itm/40PCS-Dupont-wire-jumpercables-20cm-2-54MM-male-to-female-1P-1P-For-Arduino-/181011986500 enlace]<br />
|-<br />
| 26/11/2013<br />
| Calibre Digital chino<br />
| [http://www.ebay.com/usr/hkiron-my Hkyron-my (ebay)]<br />
| 7,7€<br />
| [http://www.ebay.com/itm/Electric-6-Stainless-Steel-Digital-Vernier-Dial-Caliper-Gauge-Micro-Meter-GOOD-/290897280812 enlace]<br />
|-<br />
| 28/11/2013<br />
| Pegamento térmico disipadores<br />
| [http://www.ebay.es/usr/qqlinkys2009 qqlinkys2009 (ebay)]<br />
| 1€<br />
| [http://www.ebay.es/itm/Grasa-de-Silicona-Thermal-Compound-Glue-Heatsink-Plaster-STARS-922-para-CPU-GPU-/291093278661 enlace]<br />
|-<br />
|<br />
|[https://lh4.googleusercontent.com/-YESqsEQPlMI/UqZiY8DWwzI/AAAAAAAAFxI/Q-_juGrK4rc/w927-h696-no/DSCN0138.JPG Pedido Ebay China]<br />
|-<br />
| 29/11/2013<br />
| Hotend E3D V5 3mm Direct Extrusion<br />
| [http://e3d-online.com/E3D-HotEnds/E3D-DirectFeed-HotEnds/E3D-V5-3mm-Direct-All-Metal-HotEnd E3D-Online]<br />
| 68€ (57£)<br />
| [https://lh5.googleusercontent.com/-JOd7ZUCCD6M/UqZkr_2DpwI/AAAAAAAAFyg/18sSCYtIhBM/w927-h696-no/DSCN0154.JPG Foto]<br />
|-<br />
|'''ENERO'''<br />
|-<br />
| 26/01/2014<br />
| [https://lh3.googleusercontent.com/-Tby4Im_MRW4/UwHygr-8-uI/AAAAAAAAGPA/UiGzL8tT9aI/w881-h647-no/motores2.jpg 5 X Motor '''TB42HT47-1684AC''' Nema17 Torque 4.4kg/cm, 1.68A]<br />
| [http://store.thingibox.com/es/motores/27-stepper_nema17.html#/tipo-un_eje_p_n_tb42ht47_1684ac Thingibox]<br />
| 70€ (65+5)<br />
| Cable 70cm. Incluye conectores<br />
|-<br />
|'''FEBRERO'''<br />
|-<br />
| 04/02/2014<br />
| Grasa de Litio (500gr)<br />
| Amazon<br />
| 7,5€<br />
| [http://www.amazon.es/dp/B002E2QM6S Enlace]<br />
|-<br />
| 25/02/2014<br />
| 2 acopladores flexibles 5x5mm<br />
| José Castrillo (Clone wars) albazetech3d@gmail.com<br />
| 6€ (2x 2.5€ + 1€ correos)<br />
| Pendientes recibir... Correos SUX<br />
|}<br />
<br />
'''LISTADO COMPLETO GOOGLE DOCS'''<br />
<br />
[https://docs.google.com/spreadsheet/ccc?key=0Av_gWNbO_3opdDE0UzRCTnY0VTUtUmdrT1BhYk5qNGc#gid=0 Listado Google DOCS con enlaces y precios]<br />
<br />
<br />
'''Materiales no comprados (reciclados, etc)'''<br />
<br />
- 3x Rodamiento 608ZZ Abec 7 (Patines)<br />
<br />
- 1x Fuente alimentacion 500W ATX (12V- 28A)<br />
<br />
- 1x Ventilador 40x40mm<br />
<br />
- 1x Ventilador 60x60mm<br />
<br />
- 1x Ventilador 80x80mm<br />
<br />
<br />
<center>[[File:Stryper-Guitars-Miniature.jpg]]</center><br />
<br />
<br />
== '''Mejoras Impresas / Diseñadas''' ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Pieza'''<br />
| '''Material'''<br />
| '''Impreso'''<br />
| '''Diseño propio'''<br />
| '''Tinkerkad'''<br />
| '''Thingverse'''<br />
| '''Observaciones'''<br />
|-<br />
|Tapa Skull para engranage grande<br />
[[File:Skull_gear_lokus.jpg|Tapa calavera engranage grande]]<br />
| ABS plateado<br />
| SI<br />
| SI, '''remix''' desde [http://www.thingiverse.com/thing:49220 Skulltruder]<br />
|[https://tinkercad.com/things/8fBhMLMNT1R-tapa-para-gear '''Enlace''']<br />
|[http://www.thingiverse.com/thing:258657 '''Enlace''']<br />
| Necesario limar, impresa con soportes.<br />
|-<br />
|Estabilizador eje Z prusa i3<br />
[[File:Stryper Mejora Marco.jpg|300px|Estabilizador eje Z prusa i3]]<br />
| ABS Amararillo<br />
| SI<br />
| NO<br />
|<br />
|[http://www.thingiverse.com/thing:100128 Enlace]<br />
| Requiere varillas traseras más largas. Agrega infinita estabilidad <br />
|<br />
|-<br />
|Sujección LM8uu a cama<br />
| ABS Amararillo<br />
| SI<br />
| NO<br />
|<br />
|[http://www.thingiverse.com/thing:57770 Enlace]<br />
| Puede requerir editar la separación de los agujeros <br />
|<br />
|-<br />
|Adaptador hotend E3D Fan40mm + brida<br />
[[File:E3D 40mm.jpg|300px|Adaptador hotend E3D Fan40mm + brida]]<br />
| ABS azul<br />
| SI<br />
| SI, remix <br />
|[https://tinkercad.com/things/b9qiHDtoILL-hotend-e3d-v5-apano-ventiladores-40mm-y-sujeccion-brida '''Enlace''']<br />
|[http://www.thingiverse.com/thing:251563 '''Enlace''']<br />
| Puede usarse con un ventilador de 60mm añadiendo un adaptador adicional. <br />
|}</div>
Lokus77
https://reprap.org/mediawiki/index.php?title=Clone_Wars:_Impresora_Stryper&diff=119693
Clone Wars: Impresora Stryper
2014-03-11T13:55:55Z
<p>Lokus77: </p>
<hr />
<div><center><br />
== '''Prusa I3 STRYPER''' ==<br />
[[File:Stryper.jpg|Stryper.jpg]]<br />
</center><br />
<br />
'''Impresora Prusa iteración 3 completa en Negro y Amarillo.''' <br />
Bautizada como Stryper en honor al grupo de Glam / Hard rock americano [http://www.stryper.com/ Stryper] *<br />
<br />
(* Aunque hagan hard rock cristiano y sean unos putos moñas , SI, me gustan, ¡qué pasa!)<br />
<br />
<br />
<br />
'''Premisas:'''<br />
<br />
1.- Montar la impresora con poco dinero. Se han utilizado los componentes más económicos encontrados (cumpliendo la premisa inferior), excepto en el hotend, que se ha preferido invertir más dinero en un Allmetal.<br />
2.- Para el montaje de la impresora, si existe un componente en negro o en amarillo, se monta.<br />
Si no existe,'''¡se pinta!''' (Excepto que sea necesariamente de otro color, como las varillas color metal, etc.<br />
3.- Los motores de 2.5A apestan, están mal dimensionados. Se buscaban motores del máximo torque posible comprados en españa, de máximo 1.7A.<br />
<br />
== Ficha ==<br />
{| class="wikitable" style="width:100%"<br />
|- <br />
| <center>[[File:I3_stryper.jpg|thumb|Impresora Stryper.]]</center><br />
|<br />
* '''Nombre''': '''<font color="#0000FF">Stryper</font>'''<br />
* '''Rango''': Jedi <br />
* '''Familia''': [[Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame |Prusa Mendel Iteration 3]]<br />
* '''Generación''': 7<br />
* '''Material''': Plástico ABS Amarillo. Metacrilato negro 10mm.<br />
* '''Color''': Negro / Amarillo<br />
* '''Electrónica''': [[RAMPS|RAMPS 1.4]]<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Gregs-Jonaskuehling V4<br />
* '''Hot-End''': E3D-v5 3mm<br />
* '''Nacimiento''': 10/02/2014<br />
* '''Impresora Progenitora''': Madre:baru (Sin inscribir), Abuela: jester (Sin inscribir), Bisabuelas: #39, #134,#90<br />
* '''Hijos''': Sin descendencia (por ahora)<br />
* '''Galería ''': [https://plus.google.com/photos/118042097759435445983/albums/5986890523351025217 FOTOS]<br />
| <center></center><br />
|}<br />
<br />
== Cronología ==<br />
* '''28/08/2013''' - Inicio del proyecto.<br />
* Se va pidiendo el material, va llegando...<br />
* '''31/01/2014''' - Llegan los motores. Era lo último imprescindible para funcionar. Ya se puede terminar el montaje!!<br />
* '''01/02/2014''' - Compramos primer rollo de ABS<br />
* '''02/02/2014''' - Primeras pruebas impresión. '''Cubo calibración calidad pasable'''. Monedas calibración y demás pruebas<br />
* '''10/02/2014''' - Se considera impresora como "viva". :) Mejoras en curso....<br />
<br />
== Compras de material ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Compra'''<br />
| '''Material'''<br />
| '''Comprado en'''<br />
| '''Precio(portes incluídos)'''<br />
| '''Observaciones'''<br />
|-<br />
|''' SEPTIEMBRE'''<br />
|-<br />
| 03/09/2013<br />
| 10 Rodamientos LM8UU <br />
| Imprimiendoen3d.es<br />
| 10€<br />
| 03/09/2013<br />
| 2 Rodamientos 623ZZ10 <br />
| Imprimiendoen3d.es<br />
| 1€<br />
|-<br />
| 03/09/2013<br />
| Kit Tornilleria Prusa I3 single frame (Con muelles M3)<br />
| Imprimiendoen3d.es<br />
| 10€<br />
|-<br />
| 03/09/2013<br />
| KIT VARILLAS ROSCADAS Y LISAS PRUSA I3 SINGLE FRAME<br />
| Imprimiendoen3d.es<br />
| 22€<br />
|-<br />
| 03/09/2013<br />
| Marco Metacrilato 10mm Negro<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 40+7€<br />
|[https://11094530530805020601.googlegroups.com/attach/22e38efead88a7d6/marcoNegro.jpg?view=1&part=5 Foto]<br />
|-<br />
| 03/09/2013<br />
| 2 Poleas T2.5<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 4€<br />
|-<br />
| 03/09/2013<br />
| 2 Termistores cama Epcos 100k<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Kit piezas amarillas by Baru<br />
| Baru<br />
| Donación <br />
| [https://lh4.googleusercontent.com/-8wo9FfWgBGo/Ui5NldSUwtI/AAAAAAABLkQ/LvINckJW4K0/w927-h696-no/2013-09-09 foto]<br />
|-<br />
| 10/09/2013<br />
| Correa GT2.5 2x1m<br />
| Baru<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Espejo Ikea 20x20<br />
| Baru<br />
| Regalo<br />
|-<br />
|'''NOVIEMBRE'''<br />
|-<br />
| 07/11/2013<br />
| Hobbed Bolt M8<br />
| [http://www.ebay.es/usr/jesmar_zgz Jesmar_Zgz (ebay)]<br />
| 5,5€<br />
| [http://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/xi8AAOxyKsZRr0to/$T2eC16R,!ykE9s7t%29d!SBRr0tn3vLw~~60_57.JPG Foto]<br />
|-<br />
| 07/11/2013<br />
| Arduino SainSmart Mega2560 R3 '''Negro'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 13,7€<br />
| [http://www.ebay.es/itm/SainSmart-Mega2560-R3-ATmega2560-16AU-ATMEGA16U2-USB-Cable-For-Arduino-2013-/271187169712 enlace]<br />
|-<br />
| 07/11/2013<br />
| Heatbed SainSmart MK2B '''Negra'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 12,9€<br />
| [http://www.ebay.com/itm/SainSmart-MK2B-Heat-Bed-Heatbed-Hot-Plate-For-RepRap-Mendel-Prusa-3D-Printer-/121171627059 enlace]<br />
|-<br />
| 07/11/2013<br />
| Ramps 1.4<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 11,6€<br />
| [http://www.ebay.es/itm/3D-Printer-Controller-for-RAMPS-1-4-REPRAP-MENDEL-PRUSA-for-Arduino-/310699832639 enlace]<br />
|-<br />
| 07/11/2013<br />
| [http://i.ebayimg.com/00/s/NTk4WDYwMw==/z/GPQAAOxyrxZR2o5V/$%28KGrHqF,!ocFG6JtsySfBR2o5U6vnQ~~60_12.JPG 5 StepStick A4988 3D]<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 14,4€<br />
| [http://www.ebay.es/itm/5PCS-StepStick-Stepper-motor-driver-A4988-3D-Printer-driver-module-Reprap-Prus-/400525154696 enlace]<br />
|-<br />
| 07/11/2013<br />
| [https://lh6.googleusercontent.com/-2wXcZWexoec/UqZlmrQtoaI/AAAAAAAAFz0/786ZDUn-17U/w927-h696-no/DSCN0167.JPG 3 Endstops Mecánico con Led]<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 8€<br />
| [http://www.ebay.es/itm/Mech-Endstop-Switch-Kit-for-CNC-3D-Printer-RepRap-Makerbot-Prusa-Mendel-RAMPS1-4-/200950337317 enlace]<br />
|-<br />
| 07/11/2013<br />
| 10 tiras de 40 pines<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 1,2€<br />
| [http://www.ebay.es/itm/10PCS-40Pin-2-54mm-Single-Row-Straight-Male-Pin-Header-Strip-PBC-Ardunio-/180974247480 enlace]<br />
|-<br />
| 07/11/2013<br />
| 40 cables dupont de 20cm<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 1,6€<br />
| [www.ebay.es/itm/40PCS-Dupont-wire-jumpercables-20cm-2-54MM-male-to-female-1P-1P-For-Arduino-/181011986500 enlace]<br />
|-<br />
| 26/11/2013<br />
| Calibre Digital chino<br />
| [http://www.ebay.com/usr/hkiron-my Hkyron-my (ebay)]<br />
| 7,7€<br />
| [http://www.ebay.com/itm/Electric-6-Stainless-Steel-Digital-Vernier-Dial-Caliper-Gauge-Micro-Meter-GOOD-/290897280812 enlace]<br />
|-<br />
| 28/11/2013<br />
| Pegamento térmico disipadores<br />
| [http://www.ebay.es/usr/qqlinkys2009 qqlinkys2009 (ebay)]<br />
| 1€<br />
| [www.ebay.es/itm/Grasa-de-Silicona-Thermal-Compound-Glue-Heatsink-Plaster-STARS-922-para-CPU-GPU-/291093278661 enlace]<br />
|-<br />
|<br />
|[https://lh4.googleusercontent.com/-YESqsEQPlMI/UqZiY8DWwzI/AAAAAAAAFxI/Q-_juGrK4rc/w927-h696-no/DSCN0138.JPG Pedido Ebay China]<br />
|-<br />
| 29/11/2013<br />
| Hotend E3D V5 3mm Direct Extrusion<br />
| [http://e3d-online.com/E3D-HotEnds/E3D-DirectFeed-HotEnds/E3D-V5-3mm-Direct-All-Metal-HotEnd E3D-Online]<br />
| 68€ (57£)<br />
| [https://lh5.googleusercontent.com/-JOd7ZUCCD6M/UqZkr_2DpwI/AAAAAAAAFyg/18sSCYtIhBM/w927-h696-no/DSCN0154.JPG Foto]<br />
|-<br />
|'''ENERO'''<br />
|-<br />
| 26/01/2014<br />
| [https://lh3.googleusercontent.com/-Tby4Im_MRW4/UwHygr-8-uI/AAAAAAAAGPA/UiGzL8tT9aI/w881-h647-no/motores2.jpg 5 X Motor '''TB42HT47-1684AC''' Nema17 Torque 4.4kg/cm, 1.68A]<br />
| [http://store.thingibox.com/es/motores/27-stepper_nema17.html#/tipo-un_eje_p_n_tb42ht47_1684ac Thingibox]<br />
| 70€ (65+5)<br />
| Cable 70cm. Incluye conectores<br />
|-<br />
|'''FEBRERO'''<br />
|-<br />
| 04/02/2014<br />
| Grasa de Litio (500gr)<br />
| Amazon<br />
| 7,5€<br />
| [http://www.amazon.es/dp/B002E2QM6S Enlace]<br />
|-<br />
| 25/02/2014<br />
| 2 acopladores flexibles 5x5mm<br />
| José Castrillo (Clone wars) albazetech3d@gmail.com<br />
| 6€ (2x 2.5€ + 1€ correos)<br />
| Pendientes recibir... Correos SUX<br />
|}<br />
<br />
'''LISTADO COMPLETO GOOGLE DOCS'''<br />
<br />
[https://docs.google.com/spreadsheet/ccc?key=0Av_gWNbO_3opdDE0UzRCTnY0VTUtUmdrT1BhYk5qNGc#gid=0 Listado Google DOCS con enlaces y precios]<br />
<br />
<br />
'''Materiales no comprados (reciclados, etc)'''<br />
<br />
- 3x Rodamiento 608ZZ Abec 7 (Patines)<br />
<br />
- 1x Fuente alimentacion 500W ATX (12V- 28A)<br />
<br />
- 1x Ventilador 40x40mm<br />
<br />
- 1x Ventilador 60x60mm<br />
<br />
- 1x Ventilador 80x80mm<br />
<br />
<br />
<center>[[File:Stryper-Guitars-Miniature.jpg]]</center><br />
<br />
<br />
== '''Mejoras Impresas / Diseñadas''' ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Pieza'''<br />
| '''Material'''<br />
| '''Impreso'''<br />
| '''Diseño propio'''<br />
| '''Tinkerkad'''<br />
| '''Thingverse'''<br />
| '''Observaciones'''<br />
|-<br />
|Tapa Skull para engranage grande<br />
[[File:Skull_gear_lokus.jpg|Tapa calavera engranage grande]]<br />
| ABS plateado<br />
| SI<br />
| SI, '''remix''' desde [http://www.thingiverse.com/thing:49220 Skulltruder]<br />
|[https://tinkercad.com/things/8fBhMLMNT1R-tapa-para-gear '''Enlace''']<br />
|[http://www.thingiverse.com/thing:258657 '''Enlace''']<br />
| Necesario limar, impresa con soportes.<br />
|-<br />
|Estabilizador eje Z prusa i3<br />
[[File:Stryper Mejora Marco.jpg|300px|Estabilizador eje Z prusa i3]]<br />
| ABS Amararillo<br />
| SI<br />
| NO<br />
|<br />
|[http://www.thingiverse.com/thing:100128 Enlace]<br />
| Requiere varillas traseras más largas. Agrega infinita estabilidad <br />
|<br />
|-<br />
|Sujección LM8uu a cama<br />
| ABS Amararillo<br />
| SI<br />
| NO<br />
|<br />
|[http://www.thingiverse.com/thing:57770 Enlace]<br />
| Puede requerir editar la separación de los agujeros <br />
|<br />
|-<br />
|Adaptador hotend E3D Fan40mm + brida<br />
[[File:E3D 40mm.jpg|300px|Adaptador hotend E3D Fan40mm + brida]]<br />
| ABS azul<br />
| SI<br />
| SI, remix <br />
|[https://tinkercad.com/things/b9qiHDtoILL-hotend-e3d-v5-apano-ventiladores-40mm-y-sujeccion-brida '''Enlace''']<br />
|[http://www.thingiverse.com/thing:251563 '''Enlace''']<br />
| Puede usarse con un ventilador de 60mm añadiendo un adaptador adicional. <br />
|}</div>
Lokus77
https://reprap.org/mediawiki/index.php?title=File:Stryper-Guitars-Miniature.jpg&diff=119691
File:Stryper-Guitars-Miniature.jpg
2014-03-11T13:47:28Z
<p>Lokus77: </p>
<hr />
<div></div>
Lokus77
https://reprap.org/mediawiki/index.php?title=File:Stryper.jpg&diff=119690
File:Stryper.jpg
2014-03-11T13:42:04Z
<p>Lokus77: </p>
<hr />
<div></div>
Lokus77
https://reprap.org/mediawiki/index.php?title=Clone_Wars:_El_imperio_de_los_clones/es&diff=119680
Clone Wars: El imperio de los clones/es
2014-03-11T12:23:13Z
<p>Lokus77: </p>
<hr />
<div>{{Languages|Clone_Wars:_El_imperio_de_los_clones}}<br />
== El Imperio Clone wars ==<br />
<br />
=== Árbol genealógico ===<br />
Todo clon tiene un origen...<br />
<p id="mainPage.title" style="background:#eeeeee; color:#cf7606; padding: 0.4em; font-weight: bold; font-size: 120%;">Cantidad de Repstraps hasta el momento: 19 </p><br />
<p id="mainPage.title" style="background:#eeeeee; color:#cf7606; padding: 0.4em; font-weight: bold; font-size: 120%;">Cantidad de clones producidos hasta el momento: 264 </p><br />
<p id="mainPage.title" style="background:#eeeeee; color:#cf3606; padding: 0.4em; font-weight: bold; font-size: 120%;">Cantidad total de Impresoras 3D: 283 </p><br />
{| class="wikitable"<br />
|- <br />
| <center>[[File:2012-12-20-clone-wars-genealogy-100-clones.png|250px|Todo clon tiene un origen... (click para agrandar)]]</center><br />
| <center>[[File:cw_tree_2.png|250px]]</center><br />
|-----<br />
|<br />
* El fichero vectorial (SVG) está en [https://github.com/Obijuan/Clone-wars/tree/master/genealogy el repositorio] <br />
* [https://raw.github.com/Obijuan/Clone-wars/master/genealogy/png/2012-12-20-clone-wars-genealogy-100-clones.png PNG en alta resolución]<br />
| <center>Puedes agregar tu clon y ver los que están ya agregados en<br><br />
[http://maytheclonebewithyou.com/ May The Clone Be With You]</center><br />
|}<br />
<br />
=== Cronología ===<br />
<br />
{| class="wikitable"<br />
|- <br />
| [[File:clonwars_timeline.png|200px|Acceso a la cronología|link=http://www.b-o-t.cc]]<br />
|<br />
* El proyecto CloneWars tiene ya un tamaño importante. Hemos creado [http://www.b-o-t.cc esta cronología] para mostrar de otra forma todos los acontecimientos que han ido recogiéndose y que sin duda se producirán en adelante.<br />
|}<br />
<br />
== Mapa del Imperio de los Clones ==<br />
<br />
{| class="wikitable"<br />
|- <br />
| [[File:Clon-wars-map.png|200px|Acceso directo al mapa|link=http://maps.google.com/maps/ms?msid=212249552587451398586.0004b8d56644866cdfb9c&msa=0&ll=40.413496,-3.713379&spn=13.022942,28.520508]]<br />
|<br />
* ¿Quieres conocer '''cuántos clones hay cerca de donde vives''' o ver '''la extensión del imperio de clones'''? Consulta el [[Mapa Imperio Clones| mapa del Imperio de los Clones]].<br />
* ¿Quieres que todos sepan '''dónde se encuentra el clon que has construido o que estás construyendo'''? En el [[Mapa Imperio Clones| mapa del Imperio de los Clones]] puedes añadir la localización y estado de tu clon.<br />
|}<br />
<br />
== Generación 0: Las impresoras progenitoras ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
|- <br />
| [[File:Madre-gen0-r1.jpg|150px|link=Makerbot Thing-o-matic: MADRE]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">MADRE</font>'''<br />
* '''Localización''': Universidad Carlos III de Madrid<br />
* '''Modelo''': [http://store.makerbot.com/makerbot-thing-o-matic.html Thing-o-Matic] de la empresa Makerbot<br />
* '''Nacimiento''': 16/Mayo/2011<br />
* '''Propiedad de''': [http://asrob.uc3m.es/index.php/Main_Page Asociación de Robótica de la UC3M]<br />
* '''Hijos''': [[Clone wars:Impresora Death Star|Death Star]], [[Clone wars:Impresora Maese Artorius|Maese Artorius]], [[Clone wars:Impresora Mardan|Mardan]], [[Clone wars:Impresora Sonny|Sonny]], [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]], [[Clone_wars:Impresora_Wendy|Wendy]]<br />
* '''[http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:MADRE MAS INFORMACIÓN]'''<br />
|<br />
<center> [[File:Mother 98098.png|200px]] </center><br />
|--------<br />
| [[File:PADRE-1.jpg|160px|link=Makerbot Thing-o-matic: PADRE]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">PADRE</font>''' (a.k.a UC3-PO)<br />
* '''Localización''': Universidad Carlos III de Madrid<br />
* '''Modelo''': [http://store.makerbot.com/makerbot-thing-o-matic.html Thing-o-Matic] de la empresa Makerbot<br />
* '''Nacimiento''': 8/Oct/2011 (Impresión de la primera pieza)<br />
* '''Propiedad de''': [http://www.uc3m.es/portal/page/portal/dpto_ing_sistemas_automatica Departamento de Ingeniería de Sistemas y Automática]<br />
* '''Hijos''': [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]], [[Clone_wars:Impresora_Wendy|Wendy]], [[Clone wars: Impresora Dédadlo|Dédalo]]<br />
* '''[http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:PADRE MAS INFORMACIÓN]'''<br />
|<br />
<center> [[File:Darth-vader-star-wars-doormat.jpg|170px]] </center><br />
<center>"Yo soy tu padre..."</center><br />
|----------------<br />
| [[File:R1-50.jpg|160px|link=http://www.iearobotics.com/wiki/index.php?title=Makerbot_Cupcake:_R1]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">R1</font>''' (<font color="#00FF00">R.I.P</font>)<br />
* '''Localización''': Madrid<br />
* '''Modelo''': [http://wiki.makerbot.com/cupcake Cupcake], de Makerbot Industries (Número 8 del mundo)<br />
* '''Nacimiento''': 19/Mayo/2009<br />
* '''Propiedad de''': <br />
** [http://www.iearobotics.com/wiki/index.php?title=Juan_Gonzalez:Main Juan González-Gómez] (Obijuan)<br />
** [http://www.iearobotics.com/wiki/index.php?title=Andr%C3%A9s_Prieto-Moreno Andrés Prieto-Moreno]<br />
* '''Hijos''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel:_R2D2 R2D2]<br />
<br />
* '''[http://www.iearobotics.com/wiki/index.php?title=Makerbot_Cupcake:_R1 MAS INFORMACIÓN]'''<br />
|<br />
<center> [[File:R1-series.jpg |90px]] </center> <br><br />
<center>[http://starwars.wikia.com/wiki/R1-series_astromech_droid Serie R1]</center><br />
|----------------<br />
| [[File:MAF1.jpeg|160px]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">MAF-1</font>''' <br />
* '''Localización''': Madrid y "El Bierzo"<br />
* '''Modelo''': [http://www.makergear.com/blogs/frontpage/3323752-the-makergear-mosaic-3d-printer Mosaic], de Makergear<br />
* '''Nacimiento''': 22/Abril/2012 <br />
* '''Propiedad de''': <br />
**[http://madebyfrutos.es/ Miguel Angel de Frutos] <br />
* '''Hijos''': [[Clone wars: Impresora Rewok|Rewok]]<br />
* '''[[MakerGear Mosaic 1: MAF-1|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:StormtrooperMoonwalkWallpaper.jpg |250px]] </center> <br><br />
|----------------<br />
| [[File:Clon0-Demiurgo-6489.jpg|160px]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">Demiurgo</font>''' <br />
* '''Localización''': Madrid<br />
* '''Modelo''': [http://store.makerbot.com/makerbot-thing-o-matic.html Thing-o-Matic] de la empresa Makerbot<br />
* '''Nacimiento''': 15/Enero/2012<br />
* '''Propiedad de''': Jon Goitia<br />
* '''Hijos''': [[Impresora: la cosa|La Cosa]], [[Impresora:_unicorn|Unicorn]]<br />
* '''[[Impresora Progenitora: Demiurgo|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Lion-faced deity.jpg|200px]] </center> <br><br />
|----------------<br />
| [[File:IMG_0472.jpg|200px]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">3DGDAF</font>''' <br />
* '''Modelo''': [http://store.makerbot.com/replicator-404.html Replicator], de la empresa Makerbot<br />
* '''Nacimiento''': 22/06/2012 - Impresión de la primera pieza el 26/06/2012<br />
* '''Propiedad de''': [http://www.uc3m.es/portal/page/portal/grupos_investigacion/grupo_displays_aplicaciones_fotonicas Grupo de Displays y Aplicaciones Fotónicas de la UC3M]<br />
* '''Localización''': UC3M, Madrid<br />
* '''MAS INFORMACIÓN'''<br />
|<br />
<center> [[File:Logo 3D-GDAF.jpg|170px]] </center><br />
|----------------<br />
| [[File:Robcib-maker.jpg|200px|link=http://www.iearobotics.com/wiki/index.php?title=MakerBot_Thing-o-Matic:_Robcib-Maker]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">UPM-MAKER</font>''' <br />
* '''Modelo''': [http://store.makerbot.com/makerbot-thing-o-matic.html Thing-o-Matic] de la empresa Makerbot<br />
* '''Nacimiento''': 11/2011 <br />
* '''Propiedad de''': [http://www.robcib.etsii.upm.es/ RobCib]. Grupo de Robótica y Cibernética, UPM.<br />
* '''Localización''': ETSII-UPM, Madrid<br />
* '''[http://www.iearobotics.com/wiki/index.php?title=MakerBot_Thing-o-Matic:_Robcib-Maker MAS INFORMACIÓN]'''<br />
|<br />
<center> [[File:robcib.jpg|170px]] </center><br />
|----------------<br />
| [[File:Clon0-CADesigns.png|200px|link=]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">CADesigns</font>''' <br />
* '''Modelo''': Derivación Thing-o-Matic (conversión medidas a sistema métrico)<br />
* '''Nacimiento''': Marzo 2011<br />
* '''Propiedad de''': Carlos Monreal<br />
* '''Localización''': Zaragoza<br />
* '''MAS INFORMACIÓN'''<br />
|<br />
<center> [[File:Cadesign-logo.png|170px]] </center><br />
|--------<br />
| [[File:Cupcake-madalena.jpg|200px]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">Madalena</font>'''<br />
* '''Modelo''': [http://wiki.makerbot.com/cupcake Cupcake], de Makerbot Industries (nº 2542)<br />
* '''Nacimiento''': 12/Mar/2011 (Impresión de la primera pieza)<br />
* '''Propiedad de''': [http://canarnova.blogspot.com/ Canarnova - Grupo de creación e innovación tecnológica de Canarias]<br />
* '''Localización''': Tenerife, Canarias<br />
* '''MÁS INFORMACIÓN'''<br />
|<br />
<center> [[File:Cupcake_mint.jpg|170px]] </center><br />
|------------- <br />
| <center>[[File:Clone0-Xan.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Xan</font>'''<br />
*'''Lugar''': Cancún (México)<br />
*'''Familia''': [http://reprap.org/wiki/Printrbot#Laser-cut_Printrbots Printrbot Plus]<br />
*'''Autor''': Alejandro Martín<br />
* '''Nacimiento''': 23/Sep/2012<br />
* '''MÁS INFORMACIÓN'''<br />
| <center>[[File:Xan-logo.png|150px]]</center> <br />
|------------- <br />
| <center>[[File:Clon0-Plumabot-M.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Plumabot-M</font>'''<br />
*'''Localización''': Madrid<br />
*'''Modelo''': Replicator I<br />
*'''Lugar''': IES Juan de la Cierva, Madrid<br />
* '''Nacimiento''': 4/Junio/2012<br />
*'''Propiedad de''': IES Juan de la Cierva<br />
* '''MÁS INFORMACIÓN'''<br />
| <center>[[File:PLUMABOT-M.bmp]]</center> <br />
|------------- <br />
| <center>[[File:Clone0-pris.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Pris</font>'''<br />
*'''Lugar''': Madrid<br />
*'''Autor''': Jose Hevia<br />
*'''Familia''': Printrbot+ LC<br />
*'''Nacimiento''': 20/Julio/2012<br />
*'''MÁS INFORMACIÓN'''<br />
| <center>[[File:Pris2.jpg|200px]]</center> <br />
|------------- <br />
| <center>[[File:Clon0-Micro tr.png|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Micro</font>'''<br />
*'''Lugar''': Madrid<br />
*'''Autor''': [http://carlosgs.es/ Carlos García Saura]<br />
*'''Familia''': [http://printrbot.com/shop/printrbot-jr/ Printrbot jr.]<br />
*'''Nacimiento''': 23/Octubre/2012<br />
*'''MÁS INFORMACIÓN'''<br />
| <center>[[File:Micro-logo.png|200px]]</center> <br />
|------------- <br />
| <center>[[File:Clon0-HORI.png|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">HORI</font>'''<br />
*'''Lugar''': Madrid<br />
*'''Propietario''': [http://www-bsac.eecs.berkeley.edu/~mccoy/ Chris D. McCoy] <br />
*'''Operador actual ''': [http://madebyfrutos.wordpress.com/ Miguel Ángel de Frutos], en [http://aerobotclubderobticadeaeronuticos.blogspot.com.es/ Aerobot Club de Robótica] <br />
*'''Familia''': [http://store.makerbot.com/replicator.html/ Replicator I], de Makerbot<br />
*'''Nacimiento''': 10/Julio/2012<br />
*'''[[HORI |MAS INFORMACIÓN]]'''<br />
| <center>[[File:Clon0-HORI.png|150px]]</center> <br />
|------------- <br />
| <center>[[File:Clon0-UltiCo.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">UltiCO</font>'''<br />
*'''Lugar''': Carrasquedo (Burgos)<br />
*'''Propietario''': Ivan Blasco<br />
*'''Familia''': Ultimaker<br />
*'''Nacimiento''': 15/Jul/2012<br />
*'''[[UltiCo |MAS INFORMACIÓN]]'''<br />
| <center>[[File:UltiCO-logo.png|150px]]</center> <br />
|------------- <br />
| <center>[[File:DeutecnoMAKER-1.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Deutecno-maker</font>'''<br />
*'''Lugar''': Ávila<br />
*'''Propietario''': [http://www.deutecno.com/index2.html Deutecno, S.L]<br />
*'''Familia''': Thing-o-matic <br />
*'''Nacimiento''': 15/Dic/2011<br />
*'''[http://www.iearobotics.com/wiki/index.php?title=MakerBot_Thing-o-Matic:_Deutecno-Maker MAS INFORMACIÓN]'''<br />
| <center>[[File:DEUTECNO-label.jpg|150px]]</center> <br />
|------------- <br />
| <center>[[File:Clon 0 Magic carpet.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Magic Carpet</font>'''<br />
*'''Lugar''': Orio (Guipúzcoa)<br />
*'''Autor''': Antonio Campos<br />
*'''Familia''': [http://printrbot.com/shop/printrbot-jr/ Printrbot jr.]<br />
*'''Nacimiento''': 30/Octubre/2012<br />
*'''MÁS INFORMACIÓN'''<br />
| <center>[[File:Clon0 magic carpet logo.png|200px]]</center> <br />
|------------- <br />
| <center>[[File:Clon0-Plumabot-Gr.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Plumabot-Gr</font>'''<br />
*'''Localización''': Granada<br />
*'''Modelo''': Replicator I<br />
*'''Lugar''': IES Virgen de las Nieves, Granada<br />
*'''Nacimiento''': 28/Septiembre/2012<br />
*'''Propiedad de:''': IES Virgen de las Nieves<br />
*'''MÁS INFORMACIÓN'''<br />
| <center>[[File:PLUMABOT-Gr.jpg|200px]]</center> <br />
|------------- <br />
| <center>[[File:Art_e_Facto.jpg|200px]]</center> <br />
|<br />
*'''Nombre:''' '''<font color="#0000FF">Art-e-Facto</font>'''<br />
*'''Localización:''' Madrid<br />
*'''Modelo:''' RepStrap CNC<br />
*'''Lugar:''' Vallecas<br />
*'''Nacimiento:''' 19/Marzo/2013<br />
*'''Propiedad de:''' Miguel Herranz<br />
*'''MÁS INFORMACIÓN'''<br />
| <center>[[File:X-Wing.jpg|200px]]</center><br />
<center>X-Wing</center> <br />
|------------- <br />
|}<br />
<br />
== Los Clones ==<br />
<br />
=== Máster de la orden Jedi ===<br />
* '''Descripción''': Clones que hayan parido '''TRES o más clones''' totalmente operativos (Jedi)<br />
<br />
{| class="wikitable" style="width:100%"<br />
<br />
{{Template:CloneWars_clon|29|Gandalf the transparent | [[Prusa_Air_2|Prusa Air 2]] | 1 | 20/Jun/2012 | [http://iearobotics.com/alberto/doku.php Alberto Valero] | [http://www.iearobotics.com/wiki/index.php?title&#61;Impresora_3D:PADRE PADRE] y [http://www.iearobotics.com/wiki/index.php?title&#61;Impresora_3D:MADRE MADRE] | Universidad Carlos III de Madrid | [[Clone wars: Impresora Gandalf the transparent | '''Mas información''']] | File:Clon-29-Gandalf-the-transparent.png | File:Logo-gandalf-transparent2.png }}<br />
<br />
<br />
{{Template:CloneWars_clon|1|R2D2 (R.I.P)|[[Prusa Mendel (iteration 1)|Prusa Mendel]] original|1|24/Dic/2011|[http://www.iearobotics.com/wiki/index.php?title&#61;Juan_Gonzalez:Main Juan González-Gómez] (Obijuan) y [http://www.iearobotics.com/wiki/index.php?title&#61;Andr%C3%A9s_Prieto-Moreno Andrés Prieto-Moreno]|[http://www.iearobotics.com/wiki/index.php?title&#61;Makerbot_Cupcake:_R1 R1]|Madrid|[http://www.iearobotics.com/wiki/index.php?title&#61;Prusa_Mendel:_R2D2 '''Mas información''']|File:Prusa-r2d2-clon.jpg|File:R2d2.jpg}}<br />
<br />
<br />
{{Template:CloneWars_clon|13|R3|[[Prusa Mendel (iteration 2)|Prusa Mendel Iteración 2]]|1|01/Abril/2012|[http://www.iearobotics.com/wiki/index.php?title&#61;Juan_Gonzalez:Main Juan González Gómez] (Obijuan)|[http://www.iearobotics.com/wiki/index.php?title&#61;Prusa_Mendel:_R2D2 R2D2]|Madrid|[http://www.iearobotics.com/wiki/index.php?title&#61;Prusa_Mendel_Iteraci%C3%B3n_2:_R3 '''Mas información''']| File:R3-1.jpg | File:R3.jpg }}<br />
<br />
|---------------<br />
| <center>[[File:Clon-Deathstar 2012-01-07 1-r2.jpg|200px|link=Clone wars:Impresora Death Star]]</center><br />
|<br />
* '''Clon #2''': '''<font color="#0000FF">Death Star</font>'''<br />
* '''Lugar''': MADRID<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original<br />
* '''Generación''': 1<br />
* '''Autor''': Fernando Salceda Álvarez (klonando)<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:MADRE MADRE]<br />
* '''Descendencia''': [[Clone_wars:_The_Clone_UA|The Clone UA]], [[Clone_wars:_TIEFighter|TIE Fighter]], [[Clone_Wars:_Tron|Tron]]<br />
* '''Nacimiento''': 06/Enero/2012<br />
* '''[[Clone_wars:Impresora_Death_Star|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Deathstar.png|150px|link=Clone wars:Impresora Death Star]]</center><br />
|----------------<br />
| <center>[[File:Jedi manuela.jpg|220px|]]</center><br />
|<br />
* '''Clon #10''': '''<font color="#0000FF">Manuela</font>'''<br />
* '''Lugar''': Valladolid<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original modificada con piezas V2 <br />
* '''Generación''': 1<br />
* '''Autor''': Jose Luis del Olmo (Macnetic)<br />
* '''Impresora Progenitora''': Desconocida<br />
* '''Descendencia''': [[Clone Wars: Impresora Pepa|Pepa]], [[Clone wars:Impresora Daneel 3-law|Daneel 3-law]], C3PO, Michaelmas, Alcar, Shmi Skywalker, Prusikito, Nazgul hijo de Manuela<br />
* '''Nacimiento''': 02/Marzo/2012<br />
* '''[[Clone wars:Impresora Manuela|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Macnetic.png|200px]]</center><br />
|-----<br />
| <center>[[File:Clon-32-guaifi.jpg|200px]]</center> <br />
|<br />
* '''Clon #32''': '''<font color="#0000FF">Guaifi</font>'''<br />
* '''Lugar''': A Coruña<br />
* '''Familia''': [[Prusa Mendel (iteration 2)]], con mejoras de piezas<br />
* '''Generación''': 2 <br />
* '''Autor''': Fidel Fraga Fernández (@guaifi)<br />
* '''Impresora Progenitora''': [[Clone wars: Impresora Ociorum|Ociroum/Bricolabs]]<br />
* '''Descendencia''': Abe, Matrix, Laura Palmer<br />
* '''Nacimiento''': 10/Jun/2012<br />
* [http://fidelfraga.eu/content/impresora-3d MÁS INFORMACIÓN]<br />
: <br />
|<center> [[File:Guaifi-logo-temp.png|200px]]</center><br />
|-----------<br />
<br />
| <center>[[File:J52-r1.jpg|200px|]]</center><br />
|<br />
* '''Clon #9''': '''<font color="#0000FF">Johnny 5</font>'''<br />
* '''Lugar''': Alicante<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original modificada con piezas de la V2<br />
* '''Generación''': 1<br />
* '''Autor''': [http://www.mbrobotics.es/MbRobotics/Main.html MABLACK (Miguel Angel Berna Alberola)]<br />
* '''Impresora Progenitora''': Desconocida<br />
* '''Descendencia:''' EVE, WALL-E, Kneesaa, Conguito 3D, Nexus 6, Wedge, Queen Mother<br />
* Nacimiento: '''25/Febrero/2012'''<br />
* '''[http://www.mbrobotics.es/Wiki/index.php?title=JOHNNY5 MAS INFORMACIÓN]'''<br />
|<br />
<center> [[File:J5.jpg|200px]]</center><br />
<br />
{{Template:CloneWars_clon|39|Daneel 3-law|Prusa Iteracion 2|2|11/Agosto/2012|Alejandro Suárez, Javier Briz|[[Clone wars:Impresora Manuela|Manuela]]|Universidad de Zaragoza|[[Clone wars:Impresora Daneel 3-law | '''Mas información''']] |File:Clone-39-Daneel 3-law jedi.png|File:Logo_pulsar.png}}<br />
<br />
|-----------<br />
| <center>[[File:Clon-30-xwing.jpg|250px]]</center> <br />
|<br />
* '''Clon #30''': '''<font color="#0000FF">X-Wing</font>'''<br />
* '''Lugar''': Universidad de Málaga<br />
* '''Familia''': [http://asrob.uc3m.es/index.php/Clone_wars:_Prusa_Iteraci%C3%B3n_2 Prusa Mendel Iteration 2]<br />
* '''Generación''': 2 <br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel:_R2D2 R2D2]<br />
* '''Autor''': [http://blog.reclone3d.com Exergy123]<br />
* '''Descendencia:''': Y-Wing,Restaun3d,LAAT,Bumblebee<br />
* '''Nacimiento''': 26/Jun/2012<br />
* '''[[Clone wars:Impresora X Wing|MÁS INFORMACIÓN]]'''<br />
: <br />
|<center> [[File:Xwing_RS3.jpg|150px]]</center><br />
|----------<br />
| <center>[[File:Potato-r1.png|200px]]</center> <br />
|<br />
* '''Clon #16''': '''<font color="#0000FF">Potato</font>'''<br />
* '''Lugar''': Universidad Carlos III de Madrid<br />
* '''Familia''': Prusa iteración 2<br />
* '''Generación''': 1<br />
* Autores: [https://plus.google.com/108347194424547002289/about Santiago López]<br />
* '''Impresora Progenitora''': Holandesa ebay<br />
* '''Nacimiento''': 15/Abril/2012<br />
* '''[[Clone wars: Impresora Potato|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Mrpotato.jpg|140px]]</center><br />
|----------<br />
| <center>[[File:Clon-17-uterus.jpg|280px]]</center> <br />
|<br />
* '''Clon #17''': '''<font color="#0000FF">Úterus</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa iteración 2<br />
* '''Generación''': 2<br />
* Autor: Juan Manuel Amuedo González (Coleóptero)<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel:_R2D2 R2]<br />
* '''Descendencia''': [[Clone wars:Impresora Geek-X-truder|Geek-X-truder]], Kubrick, [[http://www.reprap.org/wiki/Clone_wars_Impresora_Moebius|Moebius]]<br />
* '''Nacimiento''': 05/Mayo/2012<br />
* [[Clone wars: Impresora Uterus|MÁS INFORMACIÓN]]<br />
|<br />
<center> [[File:SuperUterus-big-475x382.png|140px]]</center><br />
|----------<br />
| <center>[[File:Clon-41-Geek-X-truder.jpg|150px]]</center> <br />
|<br />
*'''Clon #41''': '''<font color="#0000FF">Geek-X-truder</font>'''<br />
* '''Tipo''': Printrbot<br />
* '''Generación''': 3<br />
* '''Impresora progenitora''': [[Clone wars:_Impresora_Uterus|Uterus]]<br />
* '''Descendencia''': Reena, SanValero, Mamabot, Ignacio, Bruno, Ocellet, Daniel F., Antonio M., Maikel<br />
* '''Autor''': Pablo Murillo - [http://www.arduteka.com '''Arduteka''']<br />
* '''Zaragoza'''<br />
* '''Nacimiento''': 26/Agosto/2012<br />
* '''[[Clone_wars:Impresora Geek-X-truder|MÁS INFORMACIÓN]]'''<br />
: <br />
|<br />
<center> [[File:Banner_Arduteka.png|150px]]</center><br />
|-----------<br />
| <center>[[File:2012-02-07-paclemaker.jpg|200px|link=Clone wars:Impresora PacleMAKER]]</center> <br />
|<br />
* '''Clon #7''': '''<font color="#0000FF">PacleMAKER</font>''' <br />
* '''Lugar''': Universidad Politécnica de Madrid<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original<br />
* '''Generación''': 1<br />
* '''Universidad Politécnica de Madrid'''<br />
* '''Autor''': Pablo Clemente<br />
* '''Impresora Progenitora''': Thing-o-matic de la UPM<br />
* Nacimiento: '''7/Febrero/2012'''<br />
* '''[[Clone wars:Impresora PacleMAKER|MÁS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:PacleMaker-logo.png|200px|link=Clone wars:Impresora PacleMAKER]]</center><br />
|---------<br />
| <center>[[File:Clon-55-Y-Wing.jpg|220px]]</center><br />
|<br />
* '''Clon #55''': '''<font color="#0000FF">Y-Wing</font>'''<br />
Pertenece a Reclone3d's Farm<br />
* '''Lugar''': Universidad de Málaga<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 3<br />
* '''Autor''': Exergy123<br />
* '''Impresora Progenitora''': X-Wing<br />
* Nacimiento: '''13/Octubre/2012''' a las 20:00<br />
* [MÁS INFORMACIÓN]<br />
| <center>[[File:Y-Wing.jpg|200px]]</center><br />
|---------<br />
| <center>[[File:Clone-23-The Clone UA Jedi.jpg|200px]]</center> <br />
|<br />
* '''Clon #23''': '''<font color="#0000FF">The Clon UA</font>'''<br />
* '''Lugar''': Universidad de Alicante <br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 2<br />
* Autor: Diego Viejo<br />
* '''Impresora Progenitora''': [[Clone wars:Impresora Death Star|Deathstar]]<br />
* '''Nacimiento''': 23/Mayo/2012<br />
* '''Descendencia''': [[Clone_wars:_Impresora_Dolly|Dolly]] Axlotl Tank y Robotijo<br />
* '''[[Clone_wars:_The_Clone_UA/es|MÁS INFORMACIÓN]]'''<br />
|<center> [[File:Clone_UA_logo.png|150px]]</center><br />
|---------<br />
| <center>[[File:Clon-79-SpongeBot.jpg|200px]]</center> <br />
|<br />
* '''Clon #79''': <font color="#0000FF">SpongeBot (R.I.P.)</font><br />
* '''Lugar''': A coruña<br />
* '''Familia''': Prusa iteración 2<br />
* '''Generación''': 4<br />
* '''Autor''': Alejandro Taracido (TCRobotics)<br />
* '''Impresora progenitora''': Clon #48: Matrix<br />
* '''Nacimiento''': 27/Nov/2012<br />
* '''Descendencia''': Clon #187: Super 8, Clon #188: BruceIsPrinting, Clon #221: IG-88<br />
| | <center>[[File:Spongebot-logo.png| 150px]]</center> <br />
|---------<br />
| <center>[[File:Clon-53-Michaelmas.jpg|220px|]]</center><br />
|<br />
* '''Clon #53''': '''<font color="#0000FF">Michaelmas</font>'''<br />
* '''Lugar''': Valladolid<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2] <br />
* '''Generación''': 2<br />
* '''Autor''': Jose Luis del Olmo (Macnetic)<br />
* '''Impresora Progenitora''': Manuela<br />
* '''Descendencia''': VirPrusa, Prusacervi, Rincewind, Jendrinator<br />
* Nacimiento: '''05/Octubre/2012'''<br />
* '''[[Clone wars:Impresora Michaelmas|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Macnetic.png|200px]]</center><br />
|---------<br />
| <center>[[File:Super_8CW.jpg|250px]]</center> <br />
|<br />
* '''Clon #187:''' <font color="#0000FF">'''Super 8'''</font>.<br />
* '''Lugar''': A Coruña.<br />
* '''Familia''': Prusa Iteración 3<br />
* '''Generación''': 5<br />
* '''Autor''': [[User:XoanSampaiño|Xoan Sampaiño]]<br />
* '''Impresora progenitora''': Clon #79, SpongeBot (R.I.P.)<br />
* '''Nacimiento:''' 29 de marzo de 2013<br />
* '''Electrónica''': [[Gen7 Board-AVR 1.5]]<br />
* '''Hot-End''': [http://www.printallthethings.com/en/home/40-j-head-peek.html J-Head PEEK]<br />
* '''Firmware''': [[Marlin]]<br />
* '''Descendencia'''<br />
** Clon #218: SpongeBot Reloaded<br />
** Clon #255: Boneca<br />
** Clon #262: Gladiator<br />
** Clon #298: Ingenio<br />
** Clon #311: Ctrl-Z<br />
** Clon #318: AgroBot<br />
** Clon #335: Pop<br />
| <center>[[File:Super_8CW_Logo.jpg|150px]]</center><br />
|----------<br />
| <center>[[File:Clone-26-Rewok.png|200px]]</center> <br />
|<br />
* '''Clon #26''': '''<font color="#0000FF">Rewok</font>'''<br />
* '''Lugar''': Ourense<br />
* '''Familia''': PrintrBot<br />
* '''Generación''': 1<br />
* '''Autor''': Carlos Currás (Aisflou)<br />
* '''Impresora Progenitora''': [[MakerGear Mosaic 1: MAF-1|MAF-1]]<br />
* '''Descendencia''': Khan, Torcal, Element 115<br />
* '''Nacimiento''': 13/Jun/2012<br />
* '''[[Clone wars: Impresora Rewok|MÁS INFORMACIÓN]]'''<br />
|<center> [[File:Rewok.jpg|150px]]</center><br />
|------------- <br />
| <center>[[File:Telchar.JPG|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #122''': <font color="#0000FF">Telchar, Extrusor de Mithril</font><br />
* '''Lugar''': Málaga<br />
* '''Familia''': Mendel Prusa Iteración 2<br />
* '''Generación''': 3<br />
* '''Autor''': Paco Martos (Paclón)<br />
* '''Impresora progenitora''': X-Wing [http://www.reprap.org/wiki/Clone_wars:Impresora_X_Wing]<br />
* '''Descendencia''':<br />
** Destriers (Clon #212)<br />
** Prisma I3 (Clon #233)<br />
** BliztCrank (Clon #310) <br />
* '''Nacimiento''':16/Enero/2013<br />
*[[Clone wars: Telchar|MAS INFORMACION]]<br />
| <center>[[File:Telchar1.JPG|250px]]</center><br />
|-------------<br />
|---------<br />
| <center>[[File:PrusaCervi.jpg|200px]]</center> <br />
|<br />
* '''Clon #136:''' <font color="#0000FF"> '''PRUSACERVI'''</font>.<br />
* '''Lugar:''' Madrid.<br />
* '''Tipo:''' [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa2]<br />
* '''Autor:''' CACER (Familia Cervilla)<br />
* '''Impresora progenitora:''' Michaelmas.<br />
* '''Nacimiento:''' 12 de Febrero de 2013<br />
* '''Descendencia:''' SAV Vader | XxPacerxX (En fase de calibrado)<br />
|<center> [[File:Cacer.jpg|200px]]</center><br />
|--------<br />
|}<br />
<br />
=== Consejero Jedi Supremo ===<br />
* '''Descripción''': Clones que hayan parido '''DOS clones''' totalmente operativos (Jedi)<br />
* '''Para subir de categoría''': Parir otro clon más<br />
{| class="wikitable" style="width:100%"<br />
|-------------<br />
| <center>[[File:Clon-mardan.jpg|200px|link=Clone wars:Impresora Mardan]]</center><br />
|<br />
* '''Clon #4''': '''<font color="#0000FF">Mardan</font>'''<br />
* '''Luegar''': Universidad Carlos III de Madrid<br />
* '''Familia''': [[Prusa_Mendel_(iteration_1)]]<br />
* '''Generación''': 1<br />
* '''Autor''': Marco Esteban Illescas<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:MADRE MADRE]<br />
* '''Descendencia''': Marvin, Howarto<br />
* Nacimiento: '''19/Enero/2012'''<br />
* '''[[Clone wars:Impresora Mardan|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Potato.jpg|150px|link=Clone wars:Impresora Mardan]]</center><br />
|---------<br />
| <center>[[File:Clon-44-Othon.jpg|200px]]</center> <br />
|<br />
* '''Clon #44''': '''<font color="#0000FF">Othon</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa 2<br />
* '''Generación''': 2<br />
* '''Autor''': Álvaro Ollero AKA Damrod AKA Fuintur<br />
* '''Nacimiento''': 22/07/2012 (primera pieza impresa)<br />
* '''Impresora progenitora''': [http://reprap.org/wiki/Clone_wars:Impresora_PacleMAKER PacleMAKER]<br />
* '''Descendencia''': [http://reprap.org/wiki/Clone_Wars:_Roi Roi], Plottercín3d<br />
* [http://reprap.org/wiki/Clone_Wars:_Othon '''MÁS INFORMACIÓN''']<br />
: <br />
|<br />
<center> [[File:Othon.jpg|150px]]</center><br />
|-------------<br />
| <center>[[File:Clon-46-3D-Prisa.jpg|150px]]</center><br />
|<br />
* '''Clon #46''': '''3D Prisa'''<br />
* '''Lugar''': Madrid<br />
* '''Tipo''': [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Generación''': 1<br />
* '''Autor''': Fernando Remiro<br />
* '''Impresora progenitora''': Plumabot_M<br />
* '''Descendencia''': Arturo, The Orange Printwork<br />
<br />
* '''Nacimiento''': 6/9/2012 (acabada)<br />
* [[Clone wars: Impresora 3D-Prisa|MÁS INFORMACIÓN]]<br />
|<center>[[File:Remiro-1.jpg|150px]]</center> <br />
|---------<br />
| <center>[[File:Clone-49-R5D5.jpg|200px|link=Clone_Wars:_R5D5]]</center> <br />
|<br />
* '''Clon #49''': [[Clone Wars: R5D5|'''R5D5''']]<br />
* '''Lugar''': Vitoria-Gasteiz<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Generación''': 1<br />
* '''Autor''': Raul Jimenez.<br />
* '''Impresora progenitora''': Desconocida.<br />
* '''Nacimiento''': 11/Septiembre/2012<br />
* [[Clone wars:RepRap Prusa2 R5D5|MÁS INFORMACIÓN]]<br />
|<br />
<center> [[File:711 4.jpg|150px]]</center><br />
|-------------<br />
| <center>[[File:Clon-75-bumblebee.png|200px]]</center> <br />
|<br />
* '''Clon #75''': <font color="#0000FF">Bumblebee</font><br />
* '''Lugar''': Mollet del Vallès (Barcelona)<br />
* '''Familia''': Printrbot v2<br />
* '''Autores''': Ariadna Trueba y Juan Pedro López<br />
* '''Impresora progenitora''': X-Wing<br />
* '''Nacimiento''': 22-11-2012<br />
* '''Descendencia''': C-Wing (clon #169), TKL 1.0 (clon #183)<br />
* [[Clone Wars:Impresora Bumblebee|MÁS INFORMACIÓN]]<br />
| | <center>[[File:Bumblebee-CW-logo.jpg | 200px]]</center> <br />
|--------------<br />
| <center>[[File:Jedi GrBot3D.jpg|300px]]</center><br />
*Asignado: ok<br />
*Recortador : Paclon<br />
|<br />
* '''Clon #125:''' <font color="#0000FF">GrBot-3D</font> <br />
* '''Lugar:''' Granada<br />
* '''Modelo:''' Prusa Iteration 2<br />
* '''Autor: Federico Coca<br />
* '''Impresora progenitora:''' Plumabot_Gr<br />
* '''Generación:''' 1<br />
* '''Nacimiento''':19/Enero/2013 (Acabada)<br />
* '''Descendencia (Hijos)''': [http://www.reprap.org/wiki/Clone_Wars:_Impresora_AVATAR ÁVATAR] - [http://reprap.org/wiki/Clone_Wars:_Impresora_Nabla Nabla]<br />
* '''Descendencia (Nietos)''': NeuroBot<br />
* [[Clone Wars: Impresora GrBot3D|MAS INFORMACIÓN]]<br />
| <center>[[File:GranaBot.jpg|150px]]</center><br />
<br />
|--------------<br />
| <center>[[File:20121130_201247.jpg|150px]]</center><br />
|<br />
* '''Clon #155:'''<font color="#0000FF">''' CAZURRA'''</font>.<br />
* Modelo: Prusa Mendel (interación 2)[http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2]<br />
* Autor: Jose Angel (jakolete)<br />
* Lugar: León<br />
* Progenitor: Death Star<br />
*'''Nacimiento:''' 15/01/2013<br />
* '''Electrónica:''' Sanguinololu [http://reprap.org/wiki/Sanguinololu]<br />
* '''Firmware:''' [https://github.com/algspd/asimov/tree/master/impresoras/giskard/Sprinter Sprinter modificado por Pulsar]<br />
* '''Hot-End:''' LEONOZZLE <br />
* '''Extrusor:''' (plástico de 3.00mm)<br />
* '''Descendencia''': MAQ1_MULTIJUGOS, RubenFerrero, Putativos....<br />
|<center> [[File:click.gif|150px]]</center><br />
|-------------<br />
| <center>[[File:BlackKnight.jpg|250px]]</center><br />
|<br />
* '''Clon #100.06''': <font color="#0000FF">Black Knight</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa Iteration 2<br />
* '''Generación''': 4<br />
* '''Autor''': Nuria Almodóvar, J.Vicente Almodovar<br />
* '''Impresora progenitora''': R2-Reloaded (Obijuan)<br />
* '''Nacimiento''': 21/Dic/2012<br />
* '''Descendencia''': <br />
** Clon #180 Clockwork Orange (Xherry)<br />
** Clon #251 Red Baron (Equipo Almodovar)<br />
<br />
| <center>[[File:The-Black-Knight-Rises.jpg|250px]]</center><br />
|-------------<br />
{{Template:CloneWars_clon|133|Ronquío|Prusa Iteration 2|3|28/Enero/2013|José Antonio Pérez Caparrós| JPi| Universidad de Jaén |[http://reprap.org/wiki/Clone_wars:_Ronqu%C3%ADo/es Clone wars: Impresora Ronquío]| File:Clon 133 Ronquio.jpg | File:Escudo Bit UJAxp.gif }}<br />
|---------<br />
|--------<br />
| <center>[[File:Cacharro-600px.png|250px]]</center><br />
|<br />
* '''Clon #168:'''<font color="#0000FF">''' Cacharro'''</font>.<br />
* '''Lugar''': Tarragona, España<br />
* '''Tipo''': Printrbot V2<br />
* '''Autor''': Vasil Valkov<br />
* '''Impresora progenitora: Gandalf the Transparent<br />
**'''Nacimiento:''' 08/03/2013<br />
**'''Electrónica:''' SAV MkI<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End: E3D <br />
| <center>[[File:Cacharro.jpg|150px]]</center><br />
|--------<br />
|}<br />
<br />
=== Consejero Jedi: Miembro del consejo jedi ===<br />
<br />
* '''Descripción''': Clones que hayan parido '''un clon''' totalmente operativo (Jedi). Por tanto, son clones con descendencia<br />
* '''Para subir de categoría''': Parir otro clon más<br />
{| class="wikitable" style="width:100%"<br />
|---------<br />
| <center>[[File:Misan1-r1.png|200px]]</center> <br />
|<br />
* '''Clon #19''': '''<font color="#0000FF">Black Misan</font>'''<br />
* '''Lugar''': Valencia <br />
* '''Familia''': Prusa mendel original <br />
* '''Generación''': 1<br />
* '''Autor''': Miguel Sánchez<br />
* '''Impresora Progenitora''': Piezas compradas RepRap-fab.org (Stoffel15)<br />
* '''Descendencia''': Blue Misan (y parte de Ukraine)<br />
* '''Nacimiento''': 23/Octubre/2011 <br />
* '''[[Clone Wars: Impresora Black Misan|MÁS INFORMACIÓN]]<br />
|<center> [[File:Photo.jpg|150px]]</center><br />
|----------<br />
| <center>[[File:Misan2-r3.png|200px]]</center> <br />
|<br />
* '''Clon #20''': '''<font color="#0000FF">Blue Misan</font>'''<br />
* '''Lugar''': Valencia <br />
* '''Familia''': Prusa iteración 2<br />
* '''Generación''': 2<br />
* '''Autor''': Miguel Sánchez<br />
* '''Impresora Progenitora''': [[Clone Wars: Impresora Black Misan|Black Misan]]<br />
* '''Descendencia''': Ukraine<br />
* '''Nacimiento''': 15/Marzo/2012<br />
* '''[[Clone Wars: Impresora Blue Misan|MÁS INFORMACIÓN]]<br />
|<center> [[File:Photo.jpg|150px]]</center><br />
|----------<br />
| <center>[[File:Clon halcon milenario.png|200px|link=Clone wars:Impresora Halcón Milenario]]</center><br />
|<br />
* '''Clon #5''': '''<font color="#0000FF">Halcón Milenario</font>'''<br />
* '''Lugar''': Universidad Autónoma de Madrid<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original, con rodamientos lineales<br />
* '''Generación''': 1<br />
* '''Autores''': <br />
** Carlos García Saura<br />
** Miembros del [http://www.uam.es/crm Club de Robótica y Mecatrónica de la UAM]<br />
* '''Impresora Progenitora''': Desconocida<br />
* '''Descendencia''': Lucy<br />
* '''Nacimiento''': 27/Enero/2012<br />
* '''[[Clone wars:Impresora Halcón Milenario|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Milleniumfalcon2.jpg|200px|link=Clone wars:Impresora Halcón Milenario]]</center><br />
|-----------<br />
| <center>[[File:IMG 1310.jpg|200px|link=http://asrob.uc3m.es/index.php/Clone_wars:_Impresora_Ociorum]]</center> <br />
| <br />
* '''Clon #15''': '''<font color="#0000FF">Ociorum/Bricolabs</font>'''<br />
* '''Lugar''': Coruña (Galicia)<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 1<br />
* '''Autores''':<br />
** Alejandro Taracido ([http://twitter.com/#!/TCRobotics @TCRobotics )] [http://tcrobotics.blogspot.com/2011/05/orugasrobot-arduinoorugaspan.html Blog TCRobotics] <br />
** Fidel Fraga ([http://twitter.com/#!/guaifi @guaifi )]<br />
** Quico Prol ([http://twitter.com/#!/quicoprol @quicoprol )]<br />
** Xulio Coira ([http://twitter.com/#!/xulioc @xulioc )]<br />
* '''Impresora Progenitora''': Holandesa ebay<br />
* '''Nacimiento''': 13/Abril/2012<br />
* '''Descendencia''': Guaifi<br />
* [http://www.ociorum.org Asociación Ociorum]<br />
* [[Clone wars: Impresora_Ociorum|MÁS INFORMACIÓN]]<br />
| <center> [[File:Ociorum.jpeg|200px]]</center><br />
|--------------<br />
| <center>[[File:Clon-maese-artorius.jpg|200px|link=http://asrob.uc3m.es/index.php/Clone_wars:Impresora_Maese_Artorius]]</center><br />
|<br />
* '''Clon #3''': '''<font color="#0000FF">Maese Artorius</font>'''<br />
* '''Luegar''': Universidad Carlos III de Madrid<br />
* '''Familia''': [[Prusa_Mendel]] original<br />
* '''Generación''': 1<br />
* '''Autor''': Arturo Vera García<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:MADRE MADRE]<br />
* '''Descendencia''': jP<br />
* Nacimiento: '''19/Enero/2012'''<br />
* '''[[Clone_wars:Impresora_Maese_Artorius|MAS INFORMACIÓN]]'''<br />
| <center> [[File:86509-50249-mace-windu_large.jpg|150px|link=Clone wars:Impresora Maese Artorius]]</center><br />
|-----------<br />
| <center>[[File:R2-Reloaded-decorada.png|200px]]</center> <br />
|<br />
*'''Clon #42''': '''<font color="#0000FF">R2-RELOADED</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Tipo''': Prusa 2<br />
* '''Generación''': 3<br />
* '''Autor''': [http://www.iearobotics.com/wiki/index.php?title=Juan_Gonzalez:Main Juan Gonzalez Gomez] (Obijuan)<br />
* '''Nacimiento''': 28/Agosto/2012<br />
* '''Impresora progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R3 R3]<br />
* '''Descendencia''': Maniotas<br />
* [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R2-reloaded '''MÁS INFORMACIÓN''']<br />
: <br />
|<br />
<center> [[File:R2-reloaded.png|150px]]</center><br />
|-------------<br />
| <center>[[File:matrix_printer.png|200px]]</center> <br />
|<br />
* '''Clon #48''': [[Clone Wars: Matrix|'''Matrix''']]<br />
* '''Lugar''': Vilalba (Lugo)<br />
* '''Tipo''': PrintrBot v2<br />
* '''Generación''': 3<br />
* '''Autor''': Diego Prado ([http://twitter.com/diego_p_g @diego_p_g])<br />
* '''Impresoras progenitoras''': [[Clone wars: Impresora Ociorum|'''Ociroum/Bricolabs''']], [http://fidelfraga.eu/content/impresora-3d '''Guaifi''']<br />
* '''Descendencia''': SpongeBot<br />
* '''Nacimiento''': 30 de Agosto de 2012 <br />
|<br />
<center> [[File:matrix.jpg|200px]]</center><br />
|---------<br />
| <center>[[File:Laura.jpg|200px]]</center> <br />
|<br />
* '''Clon #63''': '''<font color="#0000FF">Laura Palmer</font>'''<br />
* '''Lugar''': Vicus Spacorum<br />
* '''Familia''': Prusa iteration 2 con mejoras de piezas<br />
* '''Generación''': 3<br />
* '''Autor''': Alfredo Prado [https://twitter.com/radikalbytes @radikalbytes] [http://www.radikalbytes.com radikalbytes.com]<br />
* '''Impresora progenitora''': Guaifi<br />
* '''Descendencia''': Alfa-3P<br />
* '''Nacimiento''': 12 Octubre de 2012<br />
* [[Clone wars: Impresora Laura Palmer|MÁS INFORMACIÓN]]<br />
|<br />
<center> [[File:IMAG0343.JPG|200px]]</center><br />
|----------<br />
| <center>[[File:Ukraine-r1.png|200px]]</center> <br />
|<br />
* '''Clon #21''': '''<font color="#0000FF">Ukraine</font>'''<br />
* '''Lugar''': Valencia <br />
* '''Familia''': Printrbot<br />
* '''Generación''': 3<br />
* '''Autor''': Miguel Sánchez<br />
* '''Impresora Progenitora''': Black Misan & Blue Misan<br />
* '''Descendencia''': Acrylic3<br />
* '''Nacimiento''': 8/Abril/2012<br />
* [[Clone_wars:Impresora Ukraine|MÁS INFORMACIÓN]]<br />
|<center> [[File:Photo.jpg|150px]]</center><br />
|-------------<br />
|<center>[[File:Clon-51-MayPrintr.jpg|200px]]</center> <br />
|<br />
* '''Clon #51''': [[Clone wars:Impresora_MayPrinter|'''MayPrinter (R.I.P)''']]<br />
* '''Lugar:''' Algeciras (Cádiz)<br />
* '''Tipo:''' [http://www.iearobotics.com/wiki/index.php?title=Clone_wars:_Printrbot Printrbot]<br />
* '''Generación''': 2<br />
* '''Autor:''' Mariano Dapía ([http://twitter.com/iPadNanito @iPadNanito])<br />
* '''Impresora progenitora:''' [[Clone wars:_Impresora_Potato|'''Potato''']]<br />
* '''Nacimiento:''' 12 de Septiembre de 2012<br />
* '''Descendencia:''' [[Clone wars:_Impresora_Kalos|'''Kalos Printer''']]<br />
* '''Defunción:''' 28 de Marzo de 2013 <br />
|<center> [[File:InvadersMay.png|200px]]</center><br />
|---------<br />
| <center>[[File:PrusaCervi.jpg|200px]]</center> <br />
|<br />
* '''Clon #136:''' <font color="#0000FF"> '''PRUSACERVI'''</font>.<br />
* '''Lugar:''' Madrid.<br />
* '''Tipo:''' [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa2]<br />
* '''Autor:''' CACER (Familia Cervilla)<br />
* '''Impresora progenitora:''' Michaelmas.<br />
* '''Nacimiento:''' 12 de Febrero de 2013<br />
* '''Descendencia:''' SAV Vader | XxPacerxX (En fase de calibrado)<br />
|<center> [[File:Cacer.jpg|200px]]</center><br />
|--------<br />
| <center>[[File:Clon-36-Pepa.jpg|200px]]</center><br />
|<br />
*'''Clon #36''': '''<font color="#0000FF">Pepa</font>'''<br />
* Tipo: Prusa Iteracion 2<br />
* Progenitora: [http://asrob.uc3m.es/index.php/Clone_wars:Impresora_Manuela Manuela]<br />
* Autor: Jose Ignacio Alonso<br />
* Lugar:Valladolid<br />
* '''Nacimiento''': 28/Jul/2012<br />
* '''Descendencia''': Caminera<br />
* [[Clone Wars: Impresora Pepa|MÁS INFORMACIÓN]]<br />
: <br />
|<center> [[File:jia.jpg|200px]]</center><br />
|--------------------<br />
{{Template:CloneWars_clon|143|[http://www.reprap.org/wiki/Clone_Wars:_Impresora_AVATAR ÁVATAR]|Prusa Iteracion 2|2|10/Febrero/2013|Juan Robles. (jrdetoro)|[http://www.reprap.org/wiki/Clone_Wars:_Impresora_GrBot3D GRBot-3D]|Granada|Clone wars:Impresora Avatar|File:Avatar_jedim.jpg|File:Logoavatar.png}}<br />
|--------<br />
| <center>[[File:20130108_Cauldron_2.jpg|200px]] </center><br />
* En árbol<br />
|<br />
* '''Clon #100.01''': <font color="#0000FF">Cauldron</font><br />
* '''Lugar''': Colmenar Viejo (Madrid)<br />
* '''Familia''': Prusa I2<br />
* '''Generación''': 2<br />
* '''Autor''': José Ramón (JRmaciasCW)<br />
* '''Impresora progenitora''': Carbonite<br />
* '''Nacimiento''': 19/Dic/2012<br />
* [[Clone_wars:_Cauldron | Mas información]]<br />
| <center>[[File:Cauldron-icon_128.png|200px]]</center><br />
|---------<br />
| <center>[[File:Nabla.jpg|250px]]</center><br />
|<br />
* '''Clon #198:''' <font color="#0000FF"> '''Nabla'''</font>.<br />
* '''Modelo''': Prusa I2<br />
* '''Autor''': Miguel Ángel Fernández Rodríguez [[User:MAfernandezCW | (MafernandezCW)]]<br />
* '''Lugar''': Granada<br />
* '''Impresora Progenitora''': GrBot-3D[http://www.reprap.org/wiki/Clone_Wars:_Impresora_GrBot3D]<br />
* '''Electrónica''': Ramps 1.4/Mega<br />
* '''Firmware''': Sprinter superstable.<br />
* '''Hot-End''': J-Head 0.5mm<br />
* '''Nacimiento:''' 30 de Abril de 2013<br />
* '''Descendencia''': Yavin[http://www.reprap.org/wiki/Clone_wars:Impresora_Yavin]<br />
* [http://reprap.org/wiki/Clone_Wars:_Impresora_Nabla MAS INFORMACIÓN]<br />
| <center>[[File:Nabla.png]]</center><br />
|---------<br />
|<center>[[File:EA5PABLO.png|150px]]</center> <br />
|<br />
* '''Clon #138:''' <font color="#0000FF"> '''EA5'''</font>.<br />
* '''Lugar:''' Murcia<br />
* '''Tipo:''' [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Autor:''' Pablo Otón Zamora<br />
* '''Impresora progenitora:''' Mardan<br />
* '''Nacimiento:''' 30/Enero/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Extrusor:''' Jonaskuehling extruder <br />
* '''Hot-End:''' Budaschnozzle Gallego<br />
|<center>[[File:Cs-hyde-kapton-double-sided-silicone-adhesive-tape-amber-12-inch-x-36-yards.jpg|150px]]</center><br />
|---------<br />
|---------<br />
|<center>[[File:Venturprint_Jedi2.jpg|250px]]</center> <br />
Recorte: Chema<br />
|<br />
* '''Clon #181:'''<font color="#0000FF">'''-VENTURPRINT-'''</font><br />
* '''Modelo:''' [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] It2<br />
* '''Autor:''' [[User: ClampareroCW]] - Carlos Lamparero<br />
* '''Lugar:''' Colmenar Viejo (Madrid)<br />
<br />
* '''Impresora progenitora:''' Clon #134 "Giskard"<br />
* '''Generación:''' 5<br />
* '''Nacimiento:''' 23/03/2013<br />
* '''Descendencia:''' Clon #238 "FrankenPrusa"<br />
<br />
** '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
** '''Firmware:''' Marlin 1.0<br />
** '''Hot-End:''' Budas Gallego<br />
|<center>[[File:venturprint.png|200px]]</center><br />
|---------<br />
| <center>[[File:Gort_201309.jpg|150px]]</center> <br />
|<br />
* '''Clon #185''': [[Clone wars:Impresora_Gort/es|'''Gort''']]<br />
* '''Lugar''': Madrid. Madrid.<br />
* '''Familia''': [http://www.reprap.org/wiki/Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame Prusa Iteration 3 - Single Plate]<br />
* '''Generación''': 3<br />
* '''Autor''': Jose M. Martín<br />
*'''Impresora progenitora''': [[Clone wars: Impresora Uterus | Úterus]]<br />
* '''Nacimiento:''' 3 de Abril de 2013<br />
* '''Descendencia:''' Clon #320 "Shai-Hulud"<br />
* '''Electrónica''': [http://arduino.cc/en/Main/ArduinoBoardMega2560 Arduino Mega 2560] + [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Extrusor''': Greg's Wade extruder for Prusa i3<br />
* '''Hot-End''': [http://shop.reclone3d.com/es/extrusores-y-hot-ends/104-hispania.html J-Head hispania]<br />
* '''Firmware''': Marlin<br />
* '''Primer juego de piezas completo para descendencia: 31/10/2013<br />
| <center>[[File:CloneWars_GORT.jpg|150px]]</center><br />
|---------<br />
|}<br />
<br />
=== Jedi Masters ===<br />
<br />
* '''Descripción''': Clones totalmente operativos, que han impreso al menos 1 juego de piezas para construir otro clon.<br />
* '''Para subir de categoría''': Tener descendencia. Se debe parir un clon completo (totalmente operativo)<br />
<br />
{| class="wikitable" style="width:100%"<br />
|---------<br />
| <center>[[File:Clone-52-carbonite.png|200px|Carbonite Team]]</center> <br />
|<br />
* '''Clon #52''': '''<font color="#0000FF">Carbonite</font>'''<br />
* '''Lugar''': Alcalá de Henares - Madrid<br />
* [http://www.complubot.org Asociación de Robótica Educativa Complubot]<br />
*'''Familia''':[[Clone wars: Prusa Mold|Prusa Mold]]<br />
* Autores: <br />
** Nerea de la Riva<br />
** Iván Gallego<br />
** Eduardo Gallego (el que compra las cosas)<br />
*'''Nacimiento''': 25 de septiembre de 2012<br />
* [[Clone wars: Impresora Carbonite|MÁS INFORMACIÓN]]<br />
|<center> [[File:Avatar_complubot.png|150px|link=http://www.complubot.org]]</center><br />
|------------- <br />
| <center>[[File:Clon-71-Liperap.jpg|250px]]</center> <br />
|<br />
* '''Clon #71 ''': <font color="#0000FF">LipeRap</font><br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': Prusa Iteracion 2<br />
* '''Autor''': Pedro Clemente<br />
* '''Impresora progenitora''': Cadesign<br />
* '''Nacimiento''': 22/Oct/2012<br />
|<center>[[File:Liperap-logo.png|250px]]</center> <br />
|---------<br />
| <center>[[File:Clon-43-Tron.jpg|200px]]</center> <br />
|<br />
* '''Clon #43''': [[Clone_Wars:_Tron|'''Tron''']]<br />
* Lugar: Madrid<br />
* Tipo: Prusa iteration 2<br />
* Autor: Ramon Rivas, Edgar Salas y Guillermo Welch (G.W.C.).<br />
* '''Impresora progenitora''': [[Clone wars:Impresora Death Star|Death Star]]<br />
* Nacimiento: 4 de Septiembre de 2012<br />
* [[Clone wars:_Tron|MÁS INFORMACIÓN]]<br />
|<center> [[File:TronLogo.png|200px]]</center><br />
|----------<br />
| <center>[[File:nazgul_hijo_de_manuela.jpg|250px]]</center><br />
* En Arbol<br />
|<br />
* '''Clon #100.07''': <font color="#0000FF">Nazgul hijo de Manuela</font><br />
* '''Lugar''': Irún<br />
* '''Familia''': Prusa Iteration 2<br />
* '''Generación''': 2<br />
* '''Autor''': Ángel Andrés Lerena Pariente<br />
* '''Impresora progenitora''': Manuela<br />
* '''Nacimiento''': 28/Dic/2012<br />
| <center>[[File:nazgul.jpg|250px]]</center> <br />
|-------------<br />
| <center>[[File:Kneesaa.jpg|220px]]</center><br />
|<br />
* '''Clon #58''': '''<font color="#0000FF">[http://www.reprap.org/wiki/Clon_Wars:_Impresora_Kneesaa Kneesaa]</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 2<br />
* '''Autor''': Roberto Cancela (Maxit)<br />
* '''Impresora Progenitora''': [http://www.mbrobotics.es/Wiki/index.php?title=JOHNNY5 JOHNNY5]<br />
* '''Nacimiento''': '''25/Octubre/2012''' a las 16:00<br />
| <center>[[File:Kneesa-avatar.jpg|180px]]</center><br />
|--------------<br />
| <center>[[File:Dokesprinter.JPG|250px]]</center><br />
*Asignado: ok<br />
*Recortador : Doke<br />
| <br />
* '''Clon #129:''' <font color="#0000FF">DOKE</font> <br />
* '''Lugar:''' Bilbao, España<br />
* '''Modelo:''' Prusa Iteration 2<br />
* '''Autores:''' David Deza y Nerea Calvo<br />
* '''Impresora progenitora:''' Daniel3-Law<br />
* '''Generación:''' 3<br />
* '''Nacimiento''':27/Enero/2013<br />
|<center>[[File:Doke logo.jpg|250px|link=http://d0ke.wordpress.com]]</center><br />
|--------------<br />
| <center>[[File:Ariel-i3 WEB.jpg|150px]]</center> <br />
|<br />
* '''Clon #164:'''<font color="#0000FF">'''ARIEL'''</font>.<br />
* '''Lugar''': Vila-real<br />
* '''Tipo''': Prusa it3 con marco de madera<br />
* '''Autor''': Arturo Sancho<br />
* '''Impresora progenitora: Giskard<br />
**'''Nacimiento:''' 02/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End''': JHead 0,5<br />
|<center> [[File:Avatar.jpg|150px]]</center><br />
|--------------<br />
| <center>[[File:Clon-74-LAAT.jpg|200px]]</center> <br />
|<br />
* '''Clon #74''': <font color="#0000FF">LAAT</font><br />
* '''Lugar''': Mislata ( Valencia )<br />
* '''Familia''': Prusa Iteration 2<br />
* '''Autor''': Jorge Balaguer y Antonio Carbonell ( [ http:\\blog.2nand.com 2nand ] )<br />
* '''Impresora progenitora''': X-Wing<br />
* '''Nacimiento''': 20-11-2012<br />
* [[Clone Wars:Impresora LAAT|Mas información]]<br />
| | <center>[[ File: laat2.jpg | 150px]]</center> <br />
|--------------<br />
|<center>[[File:R4i3.jpg|250px]]</center> <br />
|<br />
* '''Clon #190:''' <font color="#0000FF">'''R4i3'''</font>.<br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa i3<br />
* '''Autores''': Juan Gonzalez y Andrés Prieto-Moreno<br />
* '''Impresora progenitora''': R3<br />
* '''Nacimiento''': 13 de abril de 2013<br />
* [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:_R4i3 MAS INFORMACIÓN]<br />
|<center>[[File:250px-R4 negtd.jpg|150px]]</center><br />
|-------------<br />
| <center>[[File:Abarthi2.jpg|250px]]</center><br />
|<br />
* '''Clon #146:'''<font color="#0000FF">''' Abarth'''</font>.<br />
* '''Lugar:''' Castell de guadalest (Alicante)<br />
* '''Tipo:''' Prusa Iteration 2 [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2]<br />
* '''Autor:''' Josep Balaguer<br />
* '''Impresora progenitora:''' Mardan [http://www.reprap.org/wiki/Clone_wars:Impresora_Mardan]<br />
*'''Nacimiento:''' 12/12/2012<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' Marlin<br />
* '''Hot-End:''' Budas Gallego 2ºGeneración // Farynozzle 2.0<br />
|<center>[[File:Abarth.jpg|250px|200px]]</center><br />
|---------<br />
|<center></center><br />
|<br />
* '''Clon #191:''' <font color="#0000FF">'''Zoltan'''</font>.<br />
* '''Lugar''': Rivas Vaciamadrid, Madrid.<br />
* '''Familia''': Prusa iteracción 2<br />
* '''Generación''': 3<br />
* '''Autor''': Alberto Otero <br />
*'''Impresora progenitora''': Clon #100.01 Cauldron<br />
* '''Nacimiento:''' 14 de Abril de 2013<br />
* '''Electrónica''': [[Ramps 1.4]]<br />
* '''Hot-End''': Farynozzle 2.0<br />
* '''Firmware''': Sprinter<br />
|<center>[[File:Zoltan.jpg|150px]]</center><br />
|---------<br />
|------<br />
| <center>[[File:Clockwork_Orange.jpg|250px]]</center><br />
|<br />
* '''Clon #180:'''<font color="#0000FF">''' -Clockwork Orange-'''</font>.<br />
* '''Lugar''': Navarra<br />
* '''Tipo''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Autor''': Xherry<br />
* '''Impresora progenitora:''' ""Black Knight"" <br />
* '''Generación''': 5<br />
**'''Nacimiento:''' 03/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End''': Budas Chino de Fabster3d<br />
|<center>[[File:A_clockwork_orange_wallpaper.jpg|150px]]</center><br />
|---------<br />
| <center>[[File:Oktopus2.jpg|250px]]</center><br />
|<br />
* '''Clon #172:'''<font color="#0000FF">''' [http://www.reprap.org/wiki/User:SbarrasCW Oktopus]'''</font>.<br />
* '''Lugar''': Madrid Centro<br />
* '''Tipo''': Prusa I2<br />
* '''Autor''': sbarrasCW (Sergio Barras)<br />
* '''Generación''': 3<br />
* '''Impresora progenitora:''' [http://www.reprap.org/wiki/Clone_wars:Impresora_Mardan Mardan]<br />
**'''Nacimiento:''' 01/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End:''' Budas Chino<br />
| <center>[[File:Oktopus.jpg|150px]]</center><br />
|---------<br />
|| <center>[[File:toxina.jpg|250px]]</center><br />
|<br />
* '''Clon #217''': '''<font color="#0000FF">TOXINA</font>'''<br />
* '''Modelo''': Prusa IT2<br />
* '''Autor''': Vicente Centeno [[User:Chentinox | (ChentinoX)]]<br />
* '''Lugar''': Cantabria<br />
* '''Impresora Progenitora''': [[ Toxic Grx]] <br />
* '''Nacimiento''': '''15/Abril/2013'''<br />
* '''Electrónica''': RAMPS 1_4<br />
* '''Firmware''': Sprinter <br />
* '''Extrusor''': Jonaskuehling extruder<br />
* '''Hot-End''': V5<br />
<br />
<br />
| <center> [[File:toxina_kit.jpg|250px]]</center><br />
|--------<br />
{{Template:CloneWars_clon|154|[http://www.reprap.org/wiki/Clone_wars:_Impresora_Wicket Wicket W. Warrick]|[http://www.reprap.org/wiki/Clone_wars:_Prusa Prusa Iteración 2]|3|21/Feb/2013|Juan Carlos Gavari Starkie|[http://www.reprap.org/wiki/Clone_wars:Impresora_Uterus Úterus]|Barcelona|[http://www.reprap.org/wiki/Clone_wars:_Impresora_Wiket W. Warrick MAS INFORMACION]|File:impresora2.jpg|File:150px-Wicket rotj.jpg}}<br />
|--------<br />
| <center>[[File:PortaBee-Grillo.jpg|200px]]</center> <br />
|* '''Clon #202''': '''<font color="#0000FF">Grillo</font>'''<br />
* '''Modelo''': PortaBee<br />
* '''Autor''': Miguel Herranz [Gredos]<br />
* '''Lugar''': Madrid (Vallecas)<br />
* '''Impresora progenitora''': [[Art-e-Facto]]<br />
* '''Nacimiento''': 25/04/2013<br />
* '''Electrónica''': Ramps 1.4 <br />
* '''Firmware''': Marlin<br />
* '''Hot-End''': J-Head MkV Chino<br />
* '''Juegos piezas:''' Antonio IB (Prusa I2, blanco) - Rubén Boluda (Prusa I2, blanco y negro)<br />
| <center>[[File:X-Wing.jpg|150px]]</center> <center></center><br />
|--------<br />
| <center></center> <br />
|* '''Clon #203''': '''<font color="#0000FF">Prusilio</font>'''<br />
* '''Modelo''': Prusa i2<br />
* '''Autor''': aliveandwell (Eduardo Dávila)<br />
* '''Lugar''': Tenerife<br />
* '''Nacimiento''': 20/06/2013<br />
* '''Electrónica''': Ramps 1.4 <br />
* '''Firmware''': Sprinter Superstable<br />
* '''Hot-End''': Farynozzle<br />
* '''Extrusor''': Jonaskuehling extruder<br />
| <center></center><center></center><br />
|---------<br />
| <center></center> <br />
|* '''Clon #237''': '''<font color="#0000FF">Caragolet de l'Oest</font>'''<br />
* '''Modelo''': Prusa i2<br />
* '''Autor''': Francesc Adell<br />
* '''Lugar''': Almenar (Lleida)<br />
* '''Impresora progenitora''': Desconocida<br />
* '''Nacimiento''': 17/7/2013<br />
* '''Electrónica''': Ramps 1.4 + Arduino Mega 2560 <br />
* '''Firmware''': R2R Sprinter<br />
* '''Extrusor''': Wade extruder<br />
| <center></center><center></center><br />
|---------<br />
| <center>[[File:000116.jpg]]</center><br />
|<br />
* '''Clon #228''': <font color="#0000FF">PROTEUS</font><br />
* '''Lugar''': Cuenca<br />
* '''Modelo''': (iteración 2)<br />
* '''Autor''': PlahuertaCW<br />
* '''Impresora progenitora''': Desconocida<br />
** '''Nacimiento''': 30/06/2013<br />
** '''Electrónica''': Arduino Mega + Ramps 1.4<br />
** '''Firmware''': Sprinter<br />
** '''Software''': Repetier-host+ Skeinforge<br />
** '''Extrusor''': Jonaskuehling<br />
** '''Hot-End''': Buda-style v1.2<br />
| <center>[[File:000117.jpg]]</center><br />
<br />
|---------<br />
| <center>[[File:Yavin.jpg|150px|Estado Actual]]</center><br />
|<br />
* '''Clon #243''': '''<font color="#0000FF">Yavin</font>'''<br />
* '''Lugar''': Motril (Granada)<br />
* '''Modelo''': Prusa Mendel (interación 2)<br />
* '''Autor''': [http://david.dantoine.org David Colmenero] (D_Skywalk)<br />
* '''Impresora progenitora''': [[Clone Wars: Impresora Nabla|Nabla]]<br />
** '''Nacimiento''': 05/07/2013<br />
** '''Electrónica''': Arduino Mega + Ramps 1.4<br />
** '''Firmware''': Marlin<br />
** '''Software''': Slic3r<br />
** '''Extrusor''': Jonaskuehling<br />
** '''Hot-End''': Budaschnozzle 2.0 (lulzbot)<br />
<br />
* '''[[Clone wars:Impresora Yavin|Más Información - Ficha]]'''<br />
<br />
| <center>[[File:YavinLogo.jpg|200px|Planeta Yavin 4]]</center><br />
|---------<br />
| <center>[[File:VinciBot_reloaded.JPG|220px]]</center><br />
|<br />
* '''Clon #226''': <font color="#0000FF">vinciBot reloaded</font><br />
* '''Lugar''': Málaga<br />
* '''Modelo''': Prusa iteration 3<br />
* '''Autores''': F. Malpartida (fm)<br />
* '''Impresora progenitora''': Uterus + vinciBot<br />
** '''Nacimiento''': 18/6/2013<br />
** '''Electrónica''': Clone Wars electronics [[http://reprap.org/wiki/SAV_MKI SAV MkI]]<br />
** '''Firmware''': Marlin<br />
** '''Extrusor''': Greg's Wade reloaded<br />
** '''Hot-End''': j-head MKV<br />
| <center>[[File:VinciDuinoTeam.gif|100px]]</center><br />
|--------<br />
| <center>[[File:printfles_3.jpg|200px]]</center> <br />
|<br />
* '''Clon #201''': <font color="#0000FF">Printfles</font><br />
* '''Lugar''': Madrid (Collado Villalba)<br />
* '''Modelo''': Prusa iteration 2<br />
* '''Autor''': Pablo Bosch [[User: Pifles]]<br />
* '''Impresora progenitora''': Desconocida<br />
** '''Nacimiento''': 28/04/2013<br />
** '''Electrónica''': Ramps 1.4 <br />
** '''Firmware''': Marlin<br />
** '''Extrusor''': Jonaskuehling<br />
** '''Hot-End''': Buda 2.0 Chino<br />
* '''[[Clone wars:Impresora Printfles|Más Información - Ficha]]'''<br />
| <center>[[File:printfles_4.jpg|150px]]</center> <br />
|---------<br />
|<center>[[File:PrusaI3.jpg|200px]]</center><br />
|<br />
* '''Clon #246''' : <font color="#0000FF"> LA ISLA 3D Prusa IT3</font><br />
* '''Lugar''' : San Fernando (Cádiz)'''<br />
* '''Familia''' : Mendel Prusa Iteración 3'''<br />
* '''Autor''': [[User:AcrespoCW | Abdón Crespo Sánchez (AcrespoCW)]] <br />
* '''Nacimiento''' : 11 de Agosto de 2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4 + Pololus<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Greg's Wade extruder for Prusa i3 by Misan<br />
* '''Hot-End''' : Buda style v1.2, boquilla: 0,5mm y 0,4mm<br />
* '''Primer juego de piezas completo para descendencia: 06/10/2013<br />
* '''[[Clone_Wars:_Impresora_LA_ISLA_3D|MÁS INFORMACIÓN]]<br />
|<center>[[File:PrusaI3.jpg|200px]]</center><br />
|---------<br />
|<center>[[File:ASPrusa-actualizada.jpg|200px]]</center> <br />
|<br />
* '''Clon #271''' : <font color="#0000FF"> ASPrusa</font><br />
* '''Lugar''' : Palencia'''<br />
* '''Familia''' : Mendel Prusa Iteración 2'''<br />
* '''Autor''': danielgap<br />
* '''Impresora progenitora''': [http://www.reprap.org/wiki/Clone_wars:Impresora_Mardan Mardan]<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4 + Pololus<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling<br />
* '''Hot-End''' : Buda style v1.2, boquilla: 0,5mm<br />
|<center>[[File:Asprusa.jpg|200px]]</center><br />
|---------<br />
|<center>[[File:e03.jpg|200px]]</center> <br />
|<br />
* '''Clon #303''' : <font color="#0000FF"> E03</font><br />
* '''Lugar''' : Vinaròs (Castellón)<br />
* '''Familia''' : Prusa i3<br />
* '''Autor''': Victor Moliner<br />
* '''Impresora progenitora''': #223 TelarBot<br />
* '''Nacimiento''' : 15/11/2013<br />
* '''Electrónica''': Mega 2560 + Ramps 1.4 <br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling<br />
* '''Hot-End''' : Catnozzle<br />
|<center></center><br />
|}<br />
<br />
=== Jedis ===<br />
<br />
* '''Descripción''': Clones terminados, que hayan impreso al menos una pieza<br />
* '''Para subir de categoría''': Imprimir un juego de piezas completo para montar otro clon<br />
<br />
{| class="wikitable" style="width:100%"<br />
|---<br />
|<center>[[File:Clon GLaDOS.jpg|200px|link=Clone wars:Impresora GLaDOS]]</center><br />
|<br />
* '''Clon #6''': '''[http://en.wikipedia.org/wiki/GLaDOS GLaDOS]'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': [http://reprap.org/wiki/RepStrap Repstrap]<br />
* '''Generación''': 1<br />
* '''Autor''': Miguel Ángel Herranz<br />
* Nacimiento: '''02/Feb/2012'''<br />
* [[Clone wars:Impresora GLaDOS|MÁS INFORMACIÓN]]<br />
|<center> [[File:Glados.png|150px|link=Clone wars:Impresora GLaDOS]]</center><br />
|---<br />
|<center>[[File:Clon-Sonny-1.png|220px|link=Clone wars:Impresora Sonny]]</center><br />
|<br />
* '''Clon #8''': '''<font color="#0000FF">Sonny</font>'''<br />
* '''Luegar''': Universidad Carlos III de Madrid<br />
* '''Familia''': [[Prusa_Mendel_(iteration_1)]] original modificada con piezas V2<br />
* '''Generación''': 1.5<br />
* '''Tipo de aguja''': 0.35 mm<br />
* '''Universidad Carlos III de Madrid'''<br />
* '''Autor''': [http://sites.google.com/site/danielgomezlendinez/ Daniel Gómez]<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:MADRE MADRE]<br />
* Nacimiento: '''7/Febrero/2012'''<br />
* [[Clone wars:Impresora Sonny|MÁS INFORMACIÓN]]<br />
|<center> [[File:Sonny-yo-robot1.png|200px]]</center><br />
|---<br />
|<center>[[File:Clon debugger 01-r1.jpg|220px|]]</center><br />
|<br />
* '''Clon #11''': '''<font color="#0000FF">Debugger</font>'''<br />
* '''Lugar''': <br />
* '''Familia''': <br />
* '''Generación''': 1<br />
* '''Autor''':<br />
* '''Impresora Progenitora''': Desconocida<br />
* Nacimiento: '''28/Feb/2012 '''<br />
* [[Clone wars:Impresora Debugger|MÁS INFORMACIÓN]]<br />
|<center> [[File:obsonet_v1b.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Fenix-bot final 03.JPG|200px|]]</center><br />
|<br />
* '''Clon #12''': '''<font color="#0000FF">Fenix-bot</font>'''<br />
* '''Lugar''': Burgos<br />
* '''Familia''': <br />
* '''Generación''': 1<br />
* '''Autor''': Raúl Barral<br />
* '''Impresora Progenitora''': Desconocida<br />
* Nacimiento: '''11/Marzo/2012'''<br />
* [[Clone wars:Impresora Fenix-bot|MÁS INFORMACIÓN]]<br />
|<center> [[File:phoenixcolorsmallvs1.jpg|150px]]</center><br />
|---<br />
|<center>[[File:ATAT.jpg|220px]]</center><br />
|<br />
* '''Clon #14''': '''<font color="#0000FF">AT-AT</font>'''<br />
* '''Lugar''': <br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original<br />
* '''Generación''': 1<br />
* '''Autor''': Xavier Tamarit<br />
* '''Impresora Progenitora''': Desconocida<br />
* Nacimiento: '''12/Abril/2012'''<br />
* [[Clone_wars:Impresora AT-AT|MÁS INFORMACIÓN]]<br />
|<center>[[File:At-at 23949NEG-2.jpg|200px]]</center><br />
|---<br />
|<center>[[File:Clon-18-han.png|200px]]</center> <br />
|<br />
* '''Clon #18''': '''<font color="#0000FF">Han</font>'''<br />
* '''Lugar''': Santa Bárbara (California, USA)<br />
* '''Familia''': Prusa iteración 2<br />
* '''Generación''': 2<br />
* Autor: [http://www.iearobotics.com/wiki/index.php?title=Andr%C3%A9s_Prieto-Moreno Andrés Prieto-Moreno Torres]<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel:_R2D2 R2]<br />
* '''Nacimiento''': 06/Mayo/2012 <br />
* [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_Han MAS INFORMACIÓN]<br />
|<center> [[File:Han solo.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Clon-22-Grifo-r1.jpg|200px]]</center> <br />
|<br />
* '''Clon #22''': '''<font color="#0000FF">Grifo</font>'''<br />
* '''Lugar''': Zamora <br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 1<br />
* Autores: <br />
** Abraham Alvaro Jimenez<br />
** Nerea Alvaro Santos (Mi Hija)<br />
* '''Impresora Progenitora''': Desconocida<br />
* '''Nacimiento''': 18/Mayo/2012<br />
* '''[[Clone_wars:Impresora Grifo|MÁS INFORMACIÓN]]<br />
|<center> [[File:grifo.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Impresora Lucy 2 Junio 2012.jpg|200px|]]</center><br />
|<br />
* '''Clon #24''': '''<font color="#0000FF">Lucy</font>'''<br />
* '''Lugar''': Universidad Autónoma de Madrid<br />
* '''Familia''': [http://www.iearobotics.com/wiki/index.php?title=Clone_wars:_Printrbot Printrbot]<br />
* '''Generación''': 2<br />
* '''Autor''': Carlos García Saura<br />
* '''Impresora Progenitora''': [[Clone wars:Impresora Halcón Milenario|Halcón Milenario]]<br />
* '''Nacimiento''': 01/Jun/2012<br />
* '''[[Clone wars:Impresora Lucy|MAS INFORMACIÓN]]'''<br />
|<center> [[File:Lucy.jpg|100px|]]</center><br />
|---<br />
|<center>[[File:Clon-25-Tiefighter.jpg|150px]]</center> <br />
|<br />
* '''Clon #25''': '''<font color="#0000FF">TIE Fighter</font>'''<br />
* TIE Fighters Squadron (Mother Ship: DeathStar)<br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa Mendel Iteracion 2<br />
* '''Generación''': 2<br />
* '''Autor''': Fernando Salceda (klonando)<br />
* '''Impresora Progenitora''': [[Clone wars:Impresora Death Star|Deathstar]]<br />
* '''Nacimiento''': 11/Jun/2012<br />
* [[Clone wars:_TIEFighter|MÁS INFORMACIÓN]]<br />
|<center> [[File:tiefighter.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Clon-27-SHODAN.png|200px]]</center> <br />
|<br />
* '''Clon #27''': '''<font color="#0000FF">SHODAN</font>'''<br />
* '''Lugar''': Universidad Politécnica de Madrid<br />
* '''Familia''': [[Prusa_Mendel_%28iteration_2%29|Prusa Iteración 2]]<br />
* '''Generación''': 3<br />
* '''Autor''': Jaime García (elgambitero)<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R3 R3]<br />
* '''Nacimiento''': 17/Jun/2012<br />
* [[Clone wars: Impresora SHODAN|MÁS INFORMACIÓN]]<br />
|<center> [[File:SHODAN.jpeg|150px]]</center><br />
|---<br />
|<center>[[File:Clon-28-Dedalo.jpg|200px]]</center> <br />
|<br />
* '''Clon #28''': '''<font color="#0000FF">Dédalo</font>'''<br />
* '''Lugar''': Universidad Carlos III de Madrid<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 1<br />
* '''Autor''': David Estévez (aka [http://www.thingiverse.com/DEF DEF])<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:PADRE PADRE]<br />
* '''Nacimiento''': 19/Jun/2012<br />
* [[Clone wars: Impresora Dédadlo|MÁS INFORMACIÓN]]<br />
|<center> [[File:daedalus_profile.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Clon-31-Prusa-popoulus.jpg|200px]]</center> <br />
|<br />
* '''Clon #31''': '''<font color="#0000FF">Prusa-Popoulus</font>'''<br />
* Lugar: Grecia<br />
* Familia: Prusa Mendel Iteration 2<br />
* Generación: 3<br />
* Impresora Progenitora: [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R3 R3]<br />
* Autor: Stathis Fotiadis<br />
* '''Nacimiento''': 30/Jun/2012<br />
* [[Clone wars:Impresora Prusa-popoulus|MÁS INFORMACIÓN]]<br />
|<center> [[File:Prusa-popoulus-logo.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Clon-33-P1.png|200px]]</center> <br />
|<br />
* '''Clon #33''': '''<font color="#0000FF">P1</font>'''<br />
* Lugar: Universidad Politécnica de Madrid<br />
* Familia: Printrbot original<br />
* Generación: 2<br />
* Impresora Progenitora: Granja de PrintrBot HQ<br />
* Autor: [http://www.iearobotics.com/wiki/index.php?title=Juan_Gonzalez:Main Juan González-Gómez] (Obijuan)<br />
* '''Nacimiento''': 11/Jul/2012<br />
* [http://www.iearobotics.com/wiki/index.php?title=Printerbot:_P1 MAS INFORMACION]<br />
|<center> [[File:P1.png|150px]]</center><br />
|---<br />
|<center>[[File:Clon-34-Marvin.png|200px]]</center> <br />
|<br />
* '''Clon #34''': '''<font color="#0000FF">Marvin</font>'''<br />
* Lugar: Universidad Carlos III de Madrid<br />
* Familia: Prusa Aire 2<br />
* Generación: 2<br />
* Impresora Progenitora: [[Clone wars:Impresora Mardan|Mardan]]<br />
* Autor: Martin Fodstad Stoelen<br />
* '''Nacimiento''': 12/Jul/2012<br />
* [[Proyecto:MAS INFORMACION|MAS INFORMACION]]<br />
|<center> [[File:marvin.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Clon-35-jP.jpg|200px]]</center> <br />
|<br />
* '''Clon #35''': '''<font color="#0000FF">jπ;</font>'''<br />
* Lugar: Universidad Carlos III de Madrid<br />
* Familia: Prusa Aire 2<br />
* Generación: 2<br />
* Impresora Progenitora: [[Clone wars:Impresora Maese Artorius|Maese Artorius]]<br />
* Autor: Itziar Lima Ramos y Juan Pablo Rodríguez García <br />
* '''Nacimiento''': 15/Jul/2012<br />
* [[Proyecto:MAS INFORMACION|MAS INFORMACION]]<br />
|<center> [[File:Jpi.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Clon37-wendy.jpg|200px]]</center><br />
|<br />
*'''Clon #37''': '''<font color="#0000FF">Wendy</font>'''<br />
* Tipo: Prusa Air 2<br />
* Progenitora: Padre y Madre<br />
* Autor: Nieves Cubo (Nicuma)<br />
* Lugar: Universidad Carlos III de Madrid<br />
* '''Nacimiento''': 03/Agosto/2012<br />
* [[Clone wars:Impresora Wendy|MAS INFORMACIÓN]]<br />
|<center> [[File:Wendy printer.jpg]]</center><br />
|---<br />
|<center>[[File:Abe.jpg|200px]]</center><br />
|<br />
*'''Clon #38''': '''<font color="#0000FF">Abe</font>'''<br />
*''' Tipo''': Prusa Iteracion 2<br />
*'''Progenitora''': [http://fidelfraga.eu/content/impresora-3d Guaifi]<br />
*'''Autor''': Javier Rebollo (Jarec)<br />
*'''Lugar''': Alcala de Guadaira (Sevilla)<br />
* '''Nacimiento''': 11/Agosto/2012<br />
|<center> [[File:Abe's.png|200px]]</center><br />
|---<br />
|<center>[[File:Clon-40-gallia-canarnova.jpg|150px]]</center><br />
|<br />
*'''Clon #40''': '''<font color="#0000FF">Gallia</font>'''<br />
*''' Tipo''': Prusa Iteracion 2<br />
*'''Progenitora''': Madalena<br />
*'''Autor''': Enrique Zanardi<br />
*'''Lugar''': Tenerife<br />
* '''Nacimiento''': 25/Agosto/2012<br />
|<center> [[File:Gallia-logo.jpg|200px]]</center><br />
|---<br />
|<center>[[File:Clon-45-PrusaHowarto.jpg|200px]]</center> <br />
|<br />
* '''Clon #45''': '''<font color="#0000FF">Arquímedes</font>'''<br />
* '''Lugar''': Ibiza<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 3<br />
* '''Autor''': Diego Lao (Howarto)<br />
* '''Impresora Progenitora''': [[Clone wars:Impresora Mardan|Mardan]]<br />
* '''Nacimiento''': 6/9/2012 (acabada)<br />
* [[Clone wars: Impresora Por ahora sin nombre|MÁS INFORMACIÓN]]<br />
|<center> [[File:HowartoAvatar.png|150px]]</center><br />
|---<br />
|<center>[[File:Clon-50-C3po.jpg|200px]]</center> <br />
|<br />
* '''Clon #50''': [[Clone_Wars:_C3PO|'''C3PO''']]<br />
* Lugar: '''Madrid'''<br />
* Tipo: Hibrido PrintrBot-Larabot<br />
* Autor: Alvaro Lara<br />
* Impresora progenitora: Manuela<br />
* Nacimiento: 17 de Septiembre de 2012 <br />
|<center> [[File:C3po doblado.jpg|200px]]</center><br />
|---<br />
|<center>[[File:Clon-54-eve.png|200px]]</center><br />
|<br />
* '''Clon #54''': '''<font color="#0000FF">EVE (Nº6)</font>'''<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 2<br />
* '''Autor''': [http://www.mbrobotics.es/MbRobotics/Main.html MABLACK (Miguel Angel Berna Alberola)]<br />
* '''Impresora Progenitora''': [http://www.mbrobotics.es/Wiki/index.php?title=JOHNNY5 JOHNNY5] <br />
* '''Electrónica''': [http://reprap.org/wiki/Sanguinololu Sanguinololu]<br />
* '''Firmware''': [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Extrusor''': [http://reprap.org/wiki/Wade%27s_Geared_Extruder Wade's extruder] (plástico de 3mm)<br />
* '''Hot-End''': [http://reprap.org/wiki/J_Head_Nozzle J-Head Mk IV-B]<br />
* Nacimiento: '''09/Octubre/2012'''<br />
|<center>[[File:Eve.png|200px]]</center><br />
|---<br />
|<center>[[File:Clone-56-la-cosa.jpg|220px]]</center><br />
|<br />
* '''Clon #56''': '''<font color="#0000FF">La cosa</font>'''<br />
* '''Lugar''': Universidad Carlos III de Madrid<br />
* '''Familia''': Prusa Air 2<br />
* '''Generación''': 2<br />
* '''Autor''': Jorge Rodríguez Marín<br />
* '''Impresora Progenitora''': [[Impresora Progenitora: Demiurgo|Demiurgo]] y [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]]<br />
* '''Nacimiento''': '''30/Septiembre/2012''' a las 12:00<br />
* [[Impresora: la cosa|MÁS INFORMACIÓN]]<br />
|<center>[[File:La-Cosa.png]]</center><br />
|---<br />
|<center>[[File:Clone-57-Unicorn.jpg|220px]]</center><br />
|<br />
* '''Clon #57''': '''<font color="#0000FF">Unicorn</font>'''<br />
* '''Lugar''': Universidad Carlos III de Madrid<br />
* '''Familia''': Prusa Air 2<br />
* '''Generación''': 2<br />
* '''Autor''': [http://roboticslab.uc3m.es/roboticslab/persona.php?id_pers=72 Juan G. Victores]<br />
* '''Impresora Progenitora''': [[Impresora Progenitora: Demiurgo|Demiurgo]] y [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]]<br />
* '''Nacimiento''': '''20/Octubre/2012''' a las 23:00<br />
* [[Impresora: unicorn|MÁS INFORMACIÓN]]<br />
|<center>[[File:Clone-57-Unicorn-logo.png|180px]]</center><br />
|---<br />
|<center>[[File:Clon-59-JJmachine.png|220px]]</center><br />
|<br />
* '''Clon #59''': '''<font color="#0000FF">JJMachine</font>'''<br />
* '''Lugar''': Málaga<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 2<br />
* '''Autor''': JgemezCW y Jimmmenez<br />
* '''Impresora Progenitora''': Daneel 3-law<br />
* '''Nacimiento''': '''20/Octubre/2012''' a las 12:00<br />
* [MÁS INFORMACIÓN]<br />
|<center> [[File:JJlogo.png|180px]] </center><br />
|---<br />
|<center>[[File:Dolly_18_Todo_Montado.JPG|220px]]</center><br />
|<br />
* '''Clon #60''': '''<font color="#0000FF">Dolly</font>'''<br />
* '''Lugar''': Alicante<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 3<br />
* '''Autores''': J. Sevila, S. Ors<br />
* '''Impresora progenitora''': The Clon UA<br />
* '''Nacimiento''': '''29/Octubre/2012''' a las 21:00<br />
* '''Electrónica''': [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware''': [https://github.com/ErikZalm/Marlin Marlin]<br />
* '''Extrusor''': Jonaskuehling (plástico de 3mm)<br />
* '''Hot-End''': [http://reprap.org/wiki/J_Head_Nozzle#Mk_IV J Head Nozzle Mk IV]<br />
* [[Clone_wars:_Impresora_Dolly|MÁS INFORMACIÓN]]<br />
|<center>[[File:DollyLogo_clean2.png|180px]]</center><br />
|---<br />
|<center>[[File:Clon-61-conguito3d.jpg|220px]]</center><br />
|<br />
* '''Clon #61''': '''<font color="#0000FF">Conguito3D</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 2<br />
* '''Autores''': DDREAM<br />
* '''Impresora progenitora''': [http://www.mbrobotics.es/Wiki/index.php?title=JOHNNY5 JOHNNY5]<br />
* '''Nacimiento''': 25/Oct/2012<br />
* [[Clone wars: Impresora Conguito3D|MÁS INFORMACIÓN]]<br />
|<center>[[File:Conguito3D-logo.png|180px]]</center><br />
|---<br />
|<center>[[File:Clone-62-Hefesto.jpg|220px]]</center><br />
|<br />
* '''Clon #62''': '''<font color="#0000FF">Hefesto</font>'''<br />
* '''Lugar''': Madrid (UC3M)<br />
* '''Familia''': Prusa Air 2<br />
* '''Generación''': 2<br />
* '''Autores''': Fernando Cerezal (y los miembros de Clone Wars)<br />
* '''Impresora progenitora''': [[Impresora Progenitora: Demiurgo|Demiurgo]] y [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]]<br />
* '''Nacimiento''': '''31/Octubre/2012''' a la 1:30<br />
* [[Clone wars: Impresora Hefesto|MÁS INFORMACIÓN]]<br />
|<center>[[File:logoHefesto.jpg|180px]]</center><br />
|---<br />
|<center>[[File:Clon-64-Ironhide.jpg|200px|]]</center> <br />
|<br />
* '''Clon #64 ''': Irohide<br />
* '''Lugar''': Badajoz<br />
* '''Familia''': Prusa Mendel<br />
* '''Generación''': <br />
* '''Autor''': Ismael De Migel Cantero<br />
* '''Impresora progenitora''': Daneel-3-law<br />
* Nacimiento: '''26/10/2012'''<br />
* [http://imc9.blogspot.com.es/p/impresora-3d.html MÁS INFORMACIÓN]<br />
|<center>[[File:Ironhide.jpg|200px|]]</center> <br />
|---<br />
|<center>[[File:Orange_Juice.jpg|200px]]</center> <br />
|<br />
* '''Clon #65 ''': <font color="#0000FF">Orange Juice</font><br />
* '''Lugar''': Barcelona<br />
* '''Familia''': Prusa Iteracion 2 con extras:Estabilizador Z y LCD<br />
* '''Autor''': David F.<br />
* '''Impresora progenitora''': Desconocida<br />
* Nacimiento: '''2/11/2012'''<br />
|<center>[[File:Freshorange.jpg|100px]]</center> <br />
|---<br />
|<center>[[File:Clon-66-Nexus-6.jpg|250px]]</center> <br />
|<br />
* '''Clon #66 ''': <font color="#0000FF">Nexus 6</font><br />
* '''Lugar''': A Coruña<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Autor''': Milo Barral<br />
* '''Impresora progenitora''': Johnny 5<br />
* '''Nacimiento''': 03/11/2012<br />
|<center>[[File:Nexus-6-Replicants.jpg|200px]]</center> <br />
|---<br />
|<center>[[File:Clon-67-T-800.jpg|200px]]</center> <br />
|<br />
* '''Clon #67 ''': <font color="#0000FF">T-800</font><br />
* '''Lugar''': UC3M<br />
* '''Familia''': Prusa Air-2<br />
* '''Autor''': Antonio Castro Gómez<br />
* '''Impresora progenitora''': [[Impresora Progenitora: Demiurgo|Demiurgo]] y [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]]<br />
* '''Nacimiento''': 29/10/2012<br />
|<center>[[File:Terminator4.jpg|200px]]</center> <br />
|---<br />
|<center>[[File:Clon-68-Lolita.jpg|200px]]</center> <br />
|<br />
* '''Clon #68 ''': <font color="#0000FF">Lolita</font><br />
* '''Lugar''': UC3M<br />
* '''Familia''': Prusa Air-2<br />
* '''Autores''': David Cabrera Rodríguez y Patricia Alba Talaverano<br />
* '''Impresora progenitora''': [[Impresora Progenitora: Demiurgo|Demiurgo]] y [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]]<br />
* '''Nacimiento''': 04/11/2012<br />
|<center>[[File:Lolita-logo.png|200px]]</center> <br />
|---<br />
|<center>[[File:ReciClon.jpg|250px]]</center> <br />
|<br />
* '''Clon #69 ''': <font color="#0000FF">ReciClon</font><br />
* '''Lugar''': Sevilla<br />
* '''Familia''': Prusa Iteracion 2<br />
* '''Autor''': Antonio Escudero<br />
* '''Impresora progenitora''': Mardan<br />
* '''Nacimiento''': 05/11/2012<br />
|<center>[[File:recicle.jpg|250px]]</center> <br />
|---<br />
|<center>[[File:Clone-70-restaun3D.jpg|250px]]</center> <br />
|<br />
* '''Clon #70 ''': <font color="#0000FF">Restaun3D</font><br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': Prusa Iteracion 2<br />
* '''Autor''': Roberto Estaun Gil<br />
* '''Impresora progenitora''': x-wing<br />
* '''Nacimiento''': 09/Nov/2012<br />
|<center>[[File:Cjuan01.jpg|250px]]</center> <br />
|---<br />
|<center>[[File:Clon-72-terpsicore.jpg|250px]]</center> <br />
|<br />
* '''Clon #72''': <font color="#0000FF">Terpsícore (<font color="#00FF00">R.I.P</font>)</font><br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': [http://reprap.org/wiki/RepRapPro_Huxley/es RepRapPro Huxley]<br />
* '''Autor''': algspd (Javier Briz)<br />
* '''Impresora progenitora''': Daneel 3-law<br />
* '''Nacimiento''': 11/Nov/2012<br />
* [[Clone_wars:Impresora_Terpsicore|Mas información]]<br />
|<center>[[File:logo_impresora_terpsicore.jpeg|150px]]</center> <br />
|---<br />
|<center>[[File:Clon-73-bender-doblador-rodriguez.jpg|200px]]</center> <br />
|<br />
* '''Clon #73''': <font color="#0000FF">Bender Doblador Rodríguez</font><br />
* '''Lugar''': Santa Cruz de Tenerife<br />
* '''Familia''': Printrbot<br />
* '''Autor''': Julián García Roger<br />
* '''Impresora progenitora''': Desconocida<br />
* '''Nacimiento''': 10/Nov/2012<br />
* [[Clone_wars:Impresora_Bender_doblador_rodríguez|Mas información]]<br />
|<center>[[File:Bender Baby.jpg|150px]]</center> <br />
|---<br />
|<center>[[File:Clone-76-Arturo.jpg|200px]]</center> <br />
|<br />
* '''Clon #76''': <font color="#0000FF">Arturo</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Autor''': Daniel Vallejo Hernando<br />
* '''Impresora progenitora''': 3D-Prisa<br />
* '''Nacimiento''': 20/Nov/2012<br />
* [[Clone Wars:Impresora Arturo|MÁS INFORMACIÓN]]<br />
|<center>[[File:Clon-76-arturo-logo.png | 150px]]</center> <br />
|---<br />
|<center>[[File:Clone-77-alcar.jpg|200px]]</center> <br />
|<br />
* '''Clon #77''': <font color="#0000FF">Alcar</font><br />
* '''Lugar''': Barcelona<br />
* '''Familia''': <br />
* '''Autor''': Jose Sanchez Sanchez<br />
* '''Impresora progenitora''': Manuela<br />
* '''Nacimiento''': 25/Nov/2012<br />
|<center>[[File:Alcar-logo.png | 200px]]</center> <br />
|---<br />
|<center>[[File:Clon-78-Kubrick.jpg|200px]]</center> <br />
|<br />
* '''Clon #78''': <font color="#0000FF">Kubrick</font><br />
* '''Lugar''': Buenos Aires, Argentina<br />
* '''Familia''': Printrbot V2<br />
* '''Autor''': Javier Marquevichi<br />
* '''Impresora progenitora''': Úterus<br />
* '''Nacimiento''': 20/Nov/2012<br />
* [[Clone Wars: Impresora Kubrick|MÁS INFORMACIÓN]]<br />
|<center>[[File:Kubrick-logo.png | 200px]]</center> <br />
|---<br />
|<center>[[File:Clone-80-VirPrusa.jpg|200px]]</center> <br />
|<br />
* '''Clon #80''': <font color="#0000FF">VirPrusa</font><br />
* '''Lugar''': Dos Hermanas, Sevilla <br />
* '''Familia''': Prusa i2<br />
* '''Autor''': Francisco Montero<br />
* '''Impresora progenitora''': Michaelmas<br />
* '''Nacimiento''': 29/Nov/2012<br />
* [[Clone Wars: Impresora VirPrusa|MÁS INFORMACIÓN]]<br />
|<center>[[File:VirPrusa-logo-defecto.png | 200px]]</center><br />
|---<br />
|<center>[[File:Clon 81 Neutronium.jpg|200px]]</center><br />
|<br />
* '''Clon #81''': <font color="#0000FF">Neutronium</font><br />
* '''Lugar''': DLabs Zaragoza<br />
* '''Familia''': Prusa Iteracion 2<br />
* '''Autor''': Degenerated Labs<br />
* '''Impresora progenitora''': [[Clone_wars:Impresora_Daneel_3-law|Daneel 3-LAW]]<br />
* '''Nacimiento''': 6/Oct/2012<br />
|<center>[[File:Neutronium-logo.png|200px]]</center><br />
|---<br />
|<center>[[File:Clon-82-odomatic.jpg|200px]]</center> <br />
|<br />
* '''Clon #82''': <font color="#0000FF">od-O-matic</font><br />
* '''Lugar''': Albacete<br />
* '''Familia''': Prusa Air 2<br />
* '''Autor''': Ricardo Monsalve<br />
* '''Impresora progenitora''': leapy<br />
* '''Nacimiento''': 2/Dic/2012<br />
|<center>[[File:Odomatic-logo.png|200px]]</center><br />
|---<br />
|<center>[[File:Clon-83-droide-de-protocolo.jpg|200px]]</center> <br />
|<br />
* '''Clon #83''': <font color="#0000FF">Droide de Protocolo</font><br />
* '''Lugar''': [http://www.aerobot.org.es AEROBOT Club de Robótica], ETS Ingenieros Aeronáuticos, UPM<br />
* '''Familia''': Prusa 2<br />
* '''Responsable''': [http://madebyfrutos.wordpress.com/ Miguel Ángel de Frutos]<br />
* '''Impresora progenitora''': R2D2<br />
* '''Nacimiento''': 3/Dic/2012<br />
|<center>[[File:Logo_Aerobot.png|150px]]</center><br />
|---<br />
|<center>[[File:Clon-84-Acrylic3.jpg|200px]]</center> <br />
|<br />
* '''Clon #84''': <font color="#0000FF">Acrylic3</font><br />
* '''Lugar''': Valencia<br />
* '''Familia''': Prusa i3<br />
* '''Autor''': Miguel Sánchez (Misan)<br />
* '''Impresora progenitora''': Ukraine<br />
* '''Nacimiento''': 01/Dic/2012<br />
|<center>[[File:Photo.jpg|200px]]</center><br />
|---<br />
|<center>[[File:Clon-85-Maniotas.jpg|200px]]</center> <br />
|<br />
* '''Clon #85''': <font color="#0000FF">Maniotas</font><br />
* '''Lugar''': Vigo<br />
* '''Familia''': Prusa i2<br />
* '''Autor''': Pablo Martínez & Rita López <br />
* '''Impresora progenitora''': R2-Reloaded<br />
* '''Nacimiento''': 3/Dic/2012<br />
|<center>[[File:Maniotas.jpg|200px]]</center><br />
|---<br />
|<center>[[File:Clon-86-Machado.jpg|200px]]</center> <br />
|<br />
* '''Clon #86''': <font color="#0000FF">Machado</font><br />
* '''Lugar''': Pulpí, Almería<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 2<br />
* '''Autor''': Ramón López<br />
* '''Impresora progenitora''': Jhonny5 <br />
* '''Nacimiento''': 4/Dic/2012<br />
|<center>[[File:machado2.jpg|200px]]</center><br />
|---<br />
|<center>[[File:Clon-87-Roi.jpg|200px]]</center> <br />
|<br />
* '''Clon #87''': '''<font color="#0000FF">Roi</font>'''<br />
* '''Lugar''': CAEND (Arganda del Rey, Madrid)<br />
* '''Familia''': Prusa 2 con alguna pieza metálica mecanizada<br />
* '''Generación''': 3<br />
* '''Autor''': Juan Carlos Liébana (CAPI)<br />
* '''Nacimiento''': 4/Dic/2012<br />
* '''Impresora progenitora''': [http://reprap.org/wiki/Clone_Wars:_Othon Othon]<br />
* [[Clone_Wars:_Roi|'''MÁS INFORMACIÓN''']]<br />
|<center> [[File:LOGO-ROI2.png|200px]]</center><br />
|---<br />
|<center>[[File:Clon-88-Leapy.png|200px]]</center> <br />
|<br />
* '''Clon #88''': '''<font color="#0000FF">Leapy</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa Air 2<br />
* '''Generación''': 1<br />
* '''Autor''': LeapTo3D<br />
* '''Nacimiento''': 6/Oct/2012<br />
* '''Impresora progenitora''': Demiurgo<br />
* [[Clone Wars: Leapy|'''MÁS INFORMACIÓN''']]<br />
|<center> [[File:Leapy-logo.png|200px]]</center><br />
|---<br />
|<center> [[File:Clon-89-Alfa3p.jpg|200px]]</center><br />
|<br />
* '''Clon #89''': '''<font color="#0000FF">alfa 3P</font>'''<br />
* Lugar: Vigo, Galicia<br />
* '''Familia''': Prusa iteration 2 con mejoras de piezas<br />
* '''Generación''': 4<br />
* '''Autor''': [https://twitter.com/alexalfaya Alejandro Alfaya],[https://plus.google.com/u/0/117476712378301252435/posts Angel Gómez], [https://twitter.com/sdaf2 Alejandro Valiñas]<br />
* '''Impresora progenitora''': <font color="#0000FF">Laura Palmer</font><br />
* '''Nacimiento''': 6 Diciembre de 2012<br />
|<center> [[File:Logoalfa3P.jpg|150px]]</center><br />
<br />
{{Template:CloneWars_clon|90|Ester Píscole|Prusa Iteracion 3|3|6/Dic/2012|algspd (Javier Briz)|Daneel 3-law|Universidad de Zaragoza|Clone_wars:Impresora_EsterPiscole|File:Clon-90-esterpiscole.jpg|File:Logo_pulsar.png}}<br />
<br />
|----------<br />
| <center>[[File:Clon-91-Babbage.jpg|250px]]</center><br />
|<br />
* '''Clon #91''': <font color="#0000FF">Babbage</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Huxley<br />
* '''Autor''': Syvic<br />
* '''Impresora progenitora''': Desconocido (RepRapPro)<br />
* '''Nacimiento''': Algún día de Noviembre de 2012<br />
* [[Mas información]]<br />
| | <center>[[File:Charles-babbage-analytical-engine-model.jpg|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon-92-The-orange-printwork.jpg|250px]]</center><br />
|<br />
* '''Clon #92''': <font color="#0000FF">The Orange PrintWork</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa i2<br />
* '''Autor''': Iker Etxarte<br />
* '''Impresora progenitora''': 3D-Prisa<br />
* '''Nacimiento''': 09-Dic-2012<br />
* [[Mas información]]<br />
| | <center>[[File:The orange printwork logo.png|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon-93-Impresori.jpg|250px]]</center><br />
|<br />
* '''Clon #93''': <font color="#0000FF">Impresori</font><br />
* '''Lugar''': Palma de Mallorca<br />
* '''Familia''': Prusa i2<br />
* '''Generación'': 2<br />
* '''Autor''': Sasori Olkof <br />
* '''Impresora progenitora''': PacleMaker<br />
* '''Nacimiento''': 09-Dic-2012<br />
* [[Mas información]]<br />
| | <center>[[File:saso.jpg|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon-94-Moebius.jpg|250px]]</center><br />
|<br />
* '''Clon #94''': <font color="#0000FF">Moebius</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Generación'': 2<br />
* '''Autor''': Luis Macías<br />
* '''Impresora progenitora''': Úterus<br />
* '''Nacimiento''': 11-Dic-2012<br />
* [[Clone wars Impresora Moebius|Mas información]]<br />
| | <center>[[File:LogoMoebius.jpg|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon-95-litris-3D.png|250px]]</center><br />
|<br />
* '''Clon #95''': <font color="#0000FF">Litris 3D</font><br />
* '''Lugar''': Alicante<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Generación''': 2<br />
* '''Autor''': Salvador Lario<br />
* '''Impresora progenitora''': Mardan<br />
* '''Nacimiento''': 12-Dic-2012<br />
* [[Mas información]]<br />
| | <center>[[File:Litris3D logo.png|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon-96-Aitor.jpg|200px]]</center><br />
|<br />
* '''Clon #96''': <font color="#0000FF">Aitor</font><br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': Printrbot<br />
* '''Generación''': 4<br />
* '''Autor''': Aitor Hernández<br />
* '''Impresora progenitora''': Geek-X-truder<br />
* '''Nacimiento''': 16-Nov-2012<br />
* [[CloneWars: Impresora Aitor|Mas información]]<br />
| | <center>[[File:Aitor avatar.jpg|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon 97 Casillas 75.jpg|200px]]</center><br />
|<br />
* '''Clon #97''': <font color="#0000FF">Casillas 75</font><br />
* '''Lugar''': Casillas (Ávila)<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 2<br />
* '''Autor''': Borja Segovia<br />
* '''Impresora progenitora''': Plumabot y 3D-Prisa<br />
* '''Nacimiento''': 16/Dic/2012<br />
* [[Clonewars: Impresora Casillas 75|Mas información]]<br />
| | <center>[[File:Casillas-97-logo.png|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon 98 mama bot.png|250px]]</center><br />
|<br />
* '''Clon #98''': <font color="#0000FF">Mamabot</font><br />
* '''Lugar''': <br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 4<br />
* '''Autor''': Marcos Castillo<br />
* '''Impresora progenitora''': Geek-X-truder<br />
* '''Nacimiento''': 16/Dic/2012<br />
* [[Clone Wars: Papa quiero un robot: Mamabot|Mas información]]<br />
| | <center>[[File:Mamabot.jpg|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon-99-lucas-clon.jpg|250px]]</center><br />
|<br />
* '''Clon #99''': <font color="#0000FF">Lucas Clon</font><br />
* '''Lugar''': Salamanca<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 4<br />
* '''Autor''': Antonio J. Lucas<br />
* '''Impresora progenitora''': Y-wing<br />
* '''Nacimiento''': 14/Dic/2012<br />
* [[Mas información]]<br />
| | <center>[[File:Lucas clon logo.png|250px]]</center> <br />
|----------<br />
| <center>[[File:Clone 100 ANYA.jpg|250px]]</center><br />
|<br />
* '''Clon #100''': <font color="#0000FF">ANYA</font><br />
* '''Lugar''': Alicante<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 3<br />
* '''Autor''': Jose Luis Martinez<br />
* '''Impresora progenitora''': Jhonny 5<br />
* '''Nacimiento''': Nov/2012<br />
* [[Mas información]]<br />
| <center>[[File:Logo-ANYA.jpg|250px]]</center> <br />
|----------<br />
| <center>[[File:Clon 100 2 aFroman-3D.jpg|250px]]</center><br />
En árbol<br />
|<br />
* '''Clon #100.02''': <font color="#0000FF">aFroman-3D</font><br />
* '''Lugar''': Getafe (Madrid)<br />
* '''Familia''': Printrbot v2<br />
* '''Generación''': 2<br />
* '''Autor''': Agustín Fernández (AromanCW)<br />
* '''Impresora progenitora''': 3D-GDAF<br />
* '''Nacimiento''': 19/Dic/2012<br />
* [[Clone_wars:_aFroman-3D | Mas información]]<br />
| <center>[[File:AFroman-3D-logo.png|250px]]</center> <br />
|----------<br />
| <center>[[File:Clon 100 03 Estherterrestre.jpg|250px]]</center><br />
En árbol<br />
|<br />
* '''Clon #100.03''': <font color="#0000FF">Estherterrestre</font><br />
* '''Lugar''': Asturias<br />
* '''Familia''': Printrbot v2 métrica<br />
* '''Generación''': 2<br />
* '''Autor''': Angel<br />
* '''Impresora progenitora''': [[Clone_wars:_Impresora_Potato | Potato]]<br />
* '''Nacimiento''': 19/Dic/2012<br />
* [[ Mas información]]<br />
| <center>[[File:Estherterrestre-logo.png|250px]]</center> <br />
|----------<br />
| <center>[[File:Clon-100.04-stitch.jpg|250px]]</center><br />
* En árbol<br />
|<br />
* '''Clon #100.04''': <font color="#0000FF">Stitch</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Printrbot v2 métrica<br />
* '''Generación''': 2<br />
* '''Autor''': Santiago Lopez<br />
* '''Impresora progenitora''': [[Clone_wars:_Impresora_Potato | Potato]]<br />
* '''Nacimiento''': 20/Dic/2012<br />
* [[ Mas información]]<br />
| <center>[[file:Stitch.png]]</center> <br />
|----------<br />
| <center>[[File:Clon-100.05-Cerberus.jpg|250px]]</center><br />
* En árbol<br />
|<br />
* '''Clon #100.05''': <font color="#0000FF">Cerberus</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 2<br />
* '''Autor''': Carlos Medina Moreno<br />
* '''Impresora progenitora''': 3D-Prisa<br />
* '''Nacimiento''': 21/Dic/2012<br />
* [[ |Mas información]]<br />
| <center>[[File:Logo cerberus.png|250px]]</center> <br />
|----------<br />
| <center>[[File:Clone-108-Lexmark printer.png|250px]]</center><br />
* En árbol<br />
|<br />
* '''Clon #100.08''': <font color="#0000FF">lexmark hijo de Gandalf</font><br />
* '''Lugar''': Martorell bcn<br />
* '''Familia''': prusa Iteration 2<br />
* '''Generación''': 2<br />
* '''Autor''':alex jimenez <br />
* '''Impresora progenitora''': Gandalf<br />
* '''Nacimiento''':15/dic/2012 <br />
<br />
| <center>[[File:Avatar_lexmark.jpg|250px]]</center><br />
|----------<br />
| <center>[[File:Grecobot.JPG|250px]]</center><br />
*Asignado: ok<br />
|<br />
* '''Clon #100.09''': <font color="#0000FF">Grecobot</font><br />
* '''Lugar''': Toledo (IES El Greco)<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 4<br />
* '''Autor''': César Rangil<br />
* '''Impresora progenitora''': Y-wing<br />
* '''Nacimiento''':25/dic/2012 <br />
|<center>[[File:logogrecobot.svg|250px]]</center><br />
|----------<br />
| <center>[[File:PENDIENTE.JPG|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #100.10''': <font color="#0000FF">Benlliure</font><br />
* '''Lugar''': Guadalajara<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 3<br />
* '''Autor''': Jose Antonio Quevedo Muñoz<br />
* '''Impresora progenitora''': Úterus<br />
* '''Nacimiento''':27/dic/2012 <br />
|<center>[[250px]]</center><br />
|----------<br />
| <center>[[File:CWMagrathea.JPG|250px]]</center><br />
*Asignado: ok<br />
|<br />
* '''Clon #100.11''': <font color="#0000FF">Magrathea</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': [http://www.reprap.org/wiki/Clone_wars:_Prusa_iteraci%C3%B3n_3 Prusa Iteración 3]<br />
* '''Generación''': X<br />
* '''Autor''': Mario Camou<br />
* '''Impresora progenitora''': Kit de [http://www.reprapsource.com RepRapSource.com]<br />
* '''Nacimiento''':28/dic/2012 <br />
* [[Clone wars:Impresora Magrathea|Más información]]<br />
|<center>[[File:Dont_panic.png|250px]]</center><br />
|----------<br />
| <center>[[File:Togusha.jpg|200px]]</center> <br />
*Asignado: ok<br />
*Recortador : Paclón<br />
|<br />
*'''Clon #100.12''': <font color="#0000FF">Tachikoma</font><br />
*'''Lugar''': Lanzarote (Canarias)<br />
*'''Familia''': Prusa iteración 2<br />
* '''Generación''': 3<br />
*'''Autor''': Jonás Rodriguez Placeres<br />
*'''Impresora progenitora:''': PacleMAKER<br />
*'''Nacimiento''': 28/Diciembre/2012<br />
*'''MÁS INFORMACIÓN'''<br />
| <center>[[File:Tachikoma_1.jpg|200px]]</center> <br />
|------------- <br />
| <center>[[File:Esfinger_printer.jpg|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #100.13''': <font color="#0000FF">Esfinger</font><br />
* '''Lugar''': Tomelloso, Ciudad Real<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 2<br />
* '''Autor''': Francisco Javier García<br />
* '''Impresora progenitora''': Mardan<br />
* '''Nacimiento''':28/dic/2012 <br />
|<center>[[File:Esfinger_avatar.JPG|250px]]</center><br />
|------------- <br />
| <center>[[File:Impresora_santiago_prego.jpg|250px]]</center><br />
*Asignado: ok<br />
*Recortador : Paclón<br />
|<br />
* '''Clon #100.14''': <font color="#0000FF">Pirate</font><br />
* '''Lugar''': Fene (A Coruña) <br />
* '''Familia''': Prusa Iteration 2 [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2]<br />
* '''Generación''': 3<br />
* '''Autor''': Santiago Prego<br />
* '''Impresora progenitora''': Uterus [http://www.reprap.org/wiki/Clone_wars:_Impresora_Uterus]<br />
* '''Nacimiento''':28/dic/2012 <br />
|<center>[[File:pirate.png|250px]]</center><br />
|----------<br />
| <center>[[File:Impresora_Bruno.JPG|250px]]</center><br />
Asignado: ok <br />
*RECORTANDO:ADANSCW<br />
|<br />
* '''Clon #100.15''': <font color="#0000FF">Bruno</font> <br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': PrintrBot<br />
* '''Generación''': 4<br />
* '''Autor''': Daniel Ferrer<br />
* '''Impresora progenitora''': Geek-X-truder<br />
* '''Nacimiento''':30/dic/2012 <br />
|<center>[[File:Avatar_Daniel_impresora_bruno.JPG|250px]]</center><br />
|----------<br />
| <center>[[File:Impresora_renovatio.jpg|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #100.16''': <font color="#0000FF">Renovatio</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': PrintrBot<br />
* '''Generación''': 3<br />
* '''Autor''': Julio Galarón<br />
* '''Impresora progenitora''': Úterus<br />
* '''Nacimiento''':31/dic/2012 <br />
* [[Clone Wars:_Impresora_Renovatio|MAS INFORMACIÓN]]<br />
|<center>[[250px]]</center><br />
¿Podeis hacerle un loguito de esos verdes? :P<br />
|<br />
|----------<br />
| <center>[[File:Porta3.jpg|250px]]</center><br />
*Asignado: ok<br />
*RECORTANDO:Adans<br />
|<br />
* '''Clon #100.17''': <font color="#0000FF">RinceWind</font><br />
* '''Lugar''': Valladolid<br />
* '''Familia''': PortaBee<br />
* '''Generación''': 3<br />
* '''Autor''': Macnetic<br />
* '''Impresora progenitora''': Michaelmas<br />
* '''Nacimiento''':31/dic/2012 <br />
|<center>[[File:Macnetic.png|250px]]</center><br />
|----------<br />
| <center>[[File:ClonX-Jaume.g.jpg|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #118''': <font color="#0000FF">"X"</font><br />
* '''Lugar''': Barcelona<br />
* '''Familia''': Prusa Mendel Interacción II<br />
* '''Generación''': 3<br />
* '''Autor''': Jaume G.<br />
* '''Impresora progenitora''': Johnny 5<br />
* '''Nacimiento''':01/enero/2013 <br />
|<center>[[File:ClonX-Jaume-Logo.jpg|250px]]</center><br />
|----------<br />
| <center>[[File:PENDIENTE.JPG|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #119''': <font color="#0000FF">PocketP3D</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa Mendel Interacción II<br />
* '''Generación''': 2<br />
* '''Autor''': Julian Carrillo<br />
* '''Impresora progenitora''': Johnny 5<br />
* '''Nacimiento''':03/enero/2013 <br />
|<center>[[250px]]</center><br />
|----------<br />
| <center>[[File:Impresora_Exoudina3D.jpg|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #120''': <font color="#0000FF">Exoudina3D</font><br />
* '''Lugar''': Granada<br />
* '''Familia''': Mendel Prusa Iteración 2<br />
* '''Generación''': 4<br />
* '''Autor''': Juanma (Exodous)<br />
* '''Impresora progenitora''': Y-Wing<br />
* '''Nacimiento''':04/enero/2013 <br />
|<center>[[File:Exodous_fire.jpg|250px]]</center><br />
|----------<br />
<br />
| <center>[[File:3D-JAM.jpg|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #121''': <font color="#0000FF">3D-JAM</font><br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': Mendel Prusa Iteración 2<br />
* '''Generación''': 2<br />
* '''Autor''': Enrique Martinez<br />
* '''Impresora progenitora''': Gandalf the transparent [http://www.reprap.org/wiki/Clone_wars:_Impresora_Gandalf_the_transparent]<br />
* '''Nacimiento''':06/octubre/2012 <br />
| <center>[[File:Logo_3DJAM.jpg|200px]]</center><br />
|----------<br />
| <center>[[File:Khan.jpg|250px]]</center><br />
*Asignado: ok<br />
*Recortador:AdansCw<br />
|<br />
* '''Clon #123''': <font color="#0000FF">Khan</font><br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': Mendel Prusa Iteración 2<br />
* '''Generación''': 2<br />
* '''Autor''': Ignacio Mora<br />
* '''Impresora progenitora''': Rewok [http://www.reprap.org/wiki/Clone_wars:_Impresora_Rewok]<br />
* '''Nacimiento''':16/Enero/2013<br />
| <center>[[File:Imster.jpg|200px]]</center><br />
|----------<br />
| <center>[[File:Prusita2.jpg|250px]]</center><br />
*Asignado: ok<br />
*Recortador:AdansCw<br />
|<br />
* '''Clon #124:''' <font color="#0000FF">Queen Mother</font> <br />
* '''Lugar:''' Barcelona (Cataluña)<br />
* '''Modelo:''' [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Autor:''' Sjædric Moreno<br />
* '''Progenitor:''' Johnny#5<br />
* '''Generación:''' 2<br />
* '''Nacimiento''':20/Nov/2012<br />
* [[Clone Wars: Impresora Queen Mother|FICHA PERSONAL DE Queen Mother]]<br />
|<center> [[File:J5.jpg|200px]]</center><br />
<center> "Mi progenitor" </center><br />
|------------<br />
<br />
<br />
|-------------<br />
| <center>[[File:Blue_Blood.JPG|250px]]</center><br />
*Asignado: ok<br />
*Recortador:AdansCw<br />
|<br />
* '''Clon #126:''' <font color="#0000FF">Blue_Blood</font> <br />
* '''Lugar:''' Madrid<br />
* '''Modelo:''' Prusa Iteration 2<br />
* '''Autor: Jorge Fernández<br />
* '''Impresora progenitora:''' [http://www.reprap.org/wiki/Clone_wars:Impresora_Mardan Mardan]<br />
* '''Generación:''' 2<br />
* '''Nacimiento''':19/Enero/2013<br />
|<center> Blue_Blood, experimentado player de: </center><br />
<center>[[File:Blue_Blood2.jpg|220px]]</center><br />
<br />
|---------<br />
<br />
|-------------<br />
| <center>[[File:Foto_LdMPrinter_R_01.jpg|250px]]</center><br />
*Asignado: ok<br />
*Recortador:AdansCw<br />
|<br />
* '''Clon #127:''' <font color="#0000FF">LdMPrinter-R-01</font> <br />
* '''Lugar:''' Yecla<br />
* '''Modelo:''' Prusa Iteration 2<br />
* '''Autor:''' Gonzalo Hernández<br />
* '''Impresora progenitora:''' Desconocida<br />
* '''Generación:''' 1<br />
* '''Nacimiento''':23/Enero/2013<br />
|<center>[[250px]]</center><br />
|---------<br />
|<center>[[File:BD.jpg|250px]]</center><br />
*Asignado: ok<br />
*Recortador:AdansCw<br />
|<br />
* '''Clon #128:''' <font color="#0000FF">BLUE DEMON</font> <br />
* '''Lugar:''' Culiacan Sinaloa Mexico<br />
* '''Modelo:''' Prusa Iteration 2<br />
* '''Autor:''' Daniel Mercado<br />
* '''Impresora progenitora:''' Desconocida<br />
* '''Generación:''' 1<br />
* '''Nacimiento''':24/Enero/2013<br />
|<center>[[File:BDmask.png|250px]]</center><br />
|---------<br />
| <center>[[File:Gcast_1imprus.JPG|250px]]</center><br />
Asignado: ok<br />
| <br />
* '''Clon #130:''' <font color="#00FF00"> '''G-Cast'''</font><br />
* '''Lugar:''' Guadalajara, México<br />
* '''Modelo:''' [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Autor:''' MioCid (Fabian Vargas)<br />
* '''Impresora progenitora:''' Mardan [http://www.reprap.org/wiki/Clone_wars:Impresora_Mardan]<br />
* '''Generación:''' 2<br />
* '''Nacimiento:''' 28/Enero/2013<br />
* (Foto de impresora pendiente... pues se esta poniendo bella)<br />
| <center>[[File:GCast.png|180px]]</center><br />
|---------<br />
| <center>[[File:LCD CHU.jpg|150px]]</center> <br />
Asignado: ok<br />
|<br />
* '''Clon #131:''' <font color="#0000FF"> '''ChUnthor'''</font><br />
* '''Lugar:''' Igualada, Barcelona<br />
* '''Modelo:''' [http://www.reprap.org/wiki/Clone_wars:_Printrbot_v2 Printrbot V2]<br />
* '''Autor:''' User:Ocellet; Javier Pajares<br />
* '''Impresora progenitora:''' Hija de Geek-X-Truder, nieta de Úterus, bisnieta de R2D2<br />
* '''Generación:''' 4<br />
* '''Nacimiento:''' 22/Enero/2013<br />
* Foto de impresora pendiente... <br />
| <center>[[File:chuunthor.jpg|240px]]</center><br />
|---------<br />
| |<center>[[File:estado.jpg|150px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #132:''' <font color="#0000FF"> '''Robotín'''</font><br />
* '''Lugar:''' Santa Cruz de Tenerife<br />
* '''Modelo:''' [http://www.reprap.org/wiki/Clone_wars:_Printrbot_v2 Printrbot V2]<br />
* '''Autor:''' [https://plus.google.com/u/0/110556455513477816958/posts Julián García Roger]<br />
* '''Impresora progenitora:''' [http://www.reprap.org/wiki/Clone_wars:Impresora_Bender_doblador_rodr%C3%ADguez Bender Doblador Rodríguez]<br />
* '''Generación:''' 2<br />
* '''Nacimiento:''' 26/Enero/2013<br />
| <center>[[File:Robotín.jpg|180px]]</center><br />
|---------<br />
<br />
{{Template:CloneWars_clon|134|Giskard|Prusa Iteracion 3|4|29/Enero/2013|Alejandro Suárez, Javier Briz|[[Clone wars:Impresora EsterPiscole|Ester Píscole]]|Universidad de Zaragoza|Clone wars:Impresora Giskard|File:Impresora_giskard.jpg|File:Logo_pulsar.png}}<br />
<br />
Asignado: ok<br />
<br />
{{Template:CloneWars_clon|135|Hydra|Prusa Iteration 2|3|30/Enero/2013|Sergi Pérez Labernia|Guaifi|Cornellà (Barcelona)|Clone wars: Impresora Hydra|File:Hydra_foto3.jpg|File:Obras.jpg}}<br />
<br />
Asignado: ok<br />
<br />
|---------<br />
<br />
| <center>[[File:Ladelprint.jpg|200px]]</center> <br />
Asignado: ok<br />
<br />
Recorte: Chema<br />
|<br />
* '''Clon #137:''' <font color="#0000FF"> '''LADELPRINT'''</font>.<br />
* '''Lugar:''' Sada (La Coruña).<br />
* '''Tipo:''' [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa2]<br />
* '''Autor:''' David Pousada<br />
* '''Impresora progenitora:''' Guaifi.<br />
* '''Nacimiento:''' 30/Enero/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/Sanguinololu/es Sanguinololu 1.3a]<br />
* '''Firmware:''' [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Hot-End:''' Polacosnozzle 0.5mm<br />
|<br />
|---------<br />
|<center>[[File:IMG 20130315 212951.jpg|150px]]</center> <br />
Asignado: ok<br />
Recorte: Chema<br />
|<br />
* '''Clon #139:''' <font color="#0000FF"> '''Plottercín3d'''</font>.<br />
* '''Lugar:''' Madrid<br />
* '''Tipo:''' [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Autor:''' Carlos García Fernámdez CgarciaWC<br />
* '''Impresora progenitora:''' Othon<br />
* '''Nacimiento:''' 27/1/2013<br />
* '''Electrónica:''' Ramps 1.4<br />
* '''Firmware:''' ???<br />
* '''Extrusor:''' <br />
* '''Hot-End:''' Budas <br />
|<center>[[File:Logo_plottercin.jpg|150px]]</center><br />
|------------- <br />
| <center>[[File:JarJar2.jpg|150px]]</center> <br />
|* '''Clon #140:''' <font color="#0000FF"> '''Jar Jar #140'''</font>.<br />
<br />
* Lugar: Zarautz (Gipuzkoa)<br />
* Tipo: Prusa Iteration 2<br />
* Autor: Lizar Azkune<br />
* Impresora progenitora: [http://www.reprap.org/wiki/Clone_wars:Impresora_Mardan Mardan]<br />
* '''Nacimiento:''' 01/Febrero/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Extrusor:''' [http://reprap.org/wiki/Wade%27s_Geared_Extruder Wade's extruder] (plástico de 3mm)<br />
* '''Hot-End:''' [https://github.com/CADesigns/FaryNozzle-1.0 Farynozzle 1.0]<br />
|<center> [[File:Zara.png|150px]]</center><br />
<br />
{{Template:CloneWars_clon|141|El Trasto|Prusa Iteracion 2|4|03/Febrero/2013|Jorge Herrero Esteban-Infantes|[http://www.reprap.org/wiki/Clone_wars:Impresora_Mardan Mardan]|Madrid (Simancas)|Clone wars:Impresora Trasto|File:El_trasto.JPG|File:Diablete.jpg}}<br />
<br />
Asignado: ok<br />
Recorte: Chema<br />
<br />
{{Template:CloneWars_clon|142|Bruniik|Prusa Iteracion 2|4|05/Febrero/2013|Adrian R. (adroqui)|Y-Wing|St. Pere de Ribes (Barcelona)|Clone wars:Impresora Bruniik|File:PENDIENTE.JPG|File:PENDIENTE.JPG}}<br />
<br />
Asignado: ok<br />
|---------<br />
| <center>[[File:Matriuska.jpg|150px]]</center><br />
|<br />
* Lugar: Burgos<br />
* Tipo: Prusa Iteration 2<br />
* Autor: Manuel Bocos<br />
* Impresora progenitora: Daneel 3-law <br />
* '''Nacimiento:''' 10/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Extrusor:''' [http://reprap.org/wiki/Wade%27s_Geared_Extruder Wade's extruder] (plástico de 3mm)<br />
* '''Hot-End:''' comprado en reprap.cc<br />
* '''<font color="#0000FF">Alteraciones:</font>'''<br />
** Hotend 0.5mm tipo NISU <br />
** Poleas T2.5 y acoples eje Z en aluminio<br />
** Ajuste de hotend 10mm a extrusor 16mm con pasta CEYS superbarra multiusos.<br />
*[http://reprap.org/wiki/Clone_wars:Impresora_Matriuska MAS INFORMACIÓN]<br />
| |<center>[[File:cosa.jpg|150px]]</center> <br />
|---------<br />
<br />
|---------<br />
| <center>[[File:SprintFull.png|150px]]</center><br />
|* '''Clon #145:''' <font color="#0000FF"> '''SprintFull''</font>.<br />
* Lugar: Rivas (Madrid)<br />
* Tipo: Prusa Iteration 2<br />
* Autor: SkilFull<br />
* Impresora progenitora: Y-Wing<br />
* '''Nacimiento:''' 01/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Extrusor:''' [http://reprap.org/wiki/Wade%27s_Geared_Extruder Wade's extruder] (plástico de 3mm)<br />
* '''Hot-End:''' J-Head<br />
<br />
|<center>[[File:PENDIENTE.JPG|150px]]</center> <br />
<br />
<br />
|---------<br />
| <center>[[File:fradesamolder.jpg|150px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #147:'''<font color="#0000FF">''' fradesamolder'''</font>.<br />
* '''Lugar:''' Santiago de Compostela<br />
* '''Tipo:''' Prusa Iteration 2 [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2]<br />
* '''Autor:''' Juan Rodríguez (JrodriCW)<br />
* '''Impresora progenitora:''' Gandalf the transparent<br />
*'''Nacimiento:''' 10/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Hot-End:''' Polaco<br />
*[http://reprap.org/wiki/Clone_wars:fradesamolder MAS INFORMACIÓN]<br />
|<center>[[File:obras.jpg|250px|250px]]</center><br />
<br />
|---------<br />
| <center>[[File:Shmi skywalker b.jpg|150px]]</center><br />
|<br />
* '''Clon #148:'''<font color="#0000FF">''' Shmi Skywalker'''</font>.<br />
* '''Lugar:''' Pamplona<br />
* '''Tipo:''' Prusa Iteration 2 [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2]<br />
* '''Autor:''' Nicholas Dawe (MVX15)<br />
* '''Impresora progenitora:''' Manuena (Clon 10)<br />
*'''Nacimiento:''' 10/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' Marlin<br />
* '''Hot-End:''' J-Head MK V<br />
|<center>[[File:Darth.jpeg|250px|250px]]</center><br />
<br />
|---------<br />
| <center>[[File:Obras.jpg|150px]]</center><br />
|<br />
* '''Clon #149:'''<font color="#0000FF">''' LEM'''</font>.<br />
* '''Lugar:''' Murcia<br />
* '''Tipo:''' Prusa Iteration 2 [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2]<br />
* '''Autor:''' delcotron<br />
* '''Impresora progenitora:''' X-Wing e Y-Wing<br />
*'''Nacimiento:''' 04/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' Marlin<br />
* '''Hot-End:''' J-Head MK V<br />
<br />
| |<center>[[File:Lem.jpg|180px|180px]]</center><br />
<br />
|---------<br />
| <center>[[File:MeMe.JPG|150px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #150:'''<font color="#0000FF">''' MeMe'''</font>.<br />
* '''Lugar:''' Zaragoza<br />
* '''Tipo:''' Prusa Iteration 3 [http://www.reprap.org/wiki/Clone_wars:_Prusa_iteraci%C3%B3n_3]<br />
* '''Autor:''' Carlos Monreal (CADesigns)<br />
* '''Impresora progenitora:''' Ester Píscole y Giskard<br />
*'''Nacimiento:''' 16/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' [https://github.com/algspd/asimov/tree/master/impresoras/giskard/Sprinter Sprinter modificado por Pulsar]<br />
* '''Hot-End:''' [https://github.com/CADesigns/FaryNozzle-1.0 Farynozzle 1.0]<br />
| <center>[[File:Meme.gif|150px]]</center><br />
<br />
{{Template:CloneWars_clon|151|[http://www.reprap.org/wiki/Clone_Wars:_Impresora_morpi morpi]|[http://www.reprap.org/wiki/Clone_wars:_Printrbot_v2 Printrbot v2]|4|28/Ene/2013|José Ángel Martínez|[http://www.reprap.org/wiki/Clone_wars:_Impresora_Uterus Úterus]|Murcia|Clone wars:Impresora morpi|File:Obras.jpg|File:Obras.jpg}}<br />
<br />
{{Template:CloneWars_clon|152|[http://www.reprap.org/wiki/Clone_Wars:_Impresora_PenBot PenBot]|Prusa Iteration 2 [http://www.reprap.org/wiki/Clone_wars:_Prusa_iteraci%C3%B3n_2]|4|09/Feb/2013|Manuel Hidalgo (leobot)|[http://www.reprap.org/wiki/Clone_wars:_Impresora_Uterus Úterus]|Albacete|Clone wars:Impresora PenBot|File:FotoPenBot.jpg|File:PenBot01.jpg}}<br />
<br />
{{Template:CloneWars_clon|153|[http://www.reprap.org/wiki/Clone_wars:_Impresora_Ger-truder Ger-truder]|[http://www.reprap.org/wiki/Clone_wars:_Printrbot_v2 Printrbot v2]|4|20/Feb/2013|Antonio Morales|[http://www.reprap.org/wiki/Clone_wars:Impresora_Geek-X-truder Geek-X-truder]|Almeria|[http://www.reprap.org/wiki/Clone_wars:_Impresora_Ger-truder MAS INFORMACION]|File:Ger-truder-nacimiento.jpg|File:Ger-truder.jpg}}<br />
<br />
<br />
<br />
<br />
|--------<br />
<br />
<br />
|--------<br />
| <center>[[File:PrusaIcaro.JPG|150px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #156:'''<font color="#0000FF">''' ICARO'''</font>.<br />
* Modelo: [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2 Prusa Mendel IT 2]<br />
* Autor: Jose Manuel Martinez Ortega<br />
* Lugar: Novelda(Alicante)<br />
* Progenitor: Desconocido<br />
* Nacimiento: 22/02/2013<br />
* Electrónica: RAMPS 1.4<br />
* Firmware: Sprinter<br />
* Hot-End: J-HEAD MK IV <br />
| <center>[[File:icaro.jpg|150px]]</center><br />
<br />
|-------<br />
<br />
|---------<br />
| <center>[[File:butana.jpg|150px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #157:'''<font color="#0000FF">''' Butana'''</font>.<br />
* '''Lugar:''' Aranjuez<br />
* '''Tipo:''' [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2 Prusa Iteration 2]<br />
* '''Autor:''' Fernando Bueno<br />
* '''Impresora progenitora:''' [http://www.reprap.org/wiki/Clone_wars:_Impresora_3D-Prisa 3DPrisa]<br />
* '''Nacimiento:''' 24/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' Sprinter<br />
* '''Hot-End:''' Budaschnozzle 1.2<br />
* '''Descendencia: ''' Clon #286 - Butana Remix Tricolore (hija) y Clon #329 - Butana SmartRAP Mini (nieta)<br />
* '''[https://plus.google.com/photos/116817292850753768933/albums/5848989618489488385?authkey=CJK2ibT27Nvm2wE Fotos e info]'''<br />
| <center>[[File:logo_fbuenonet.png|150px]]</center><br />
|---------<br />
<br />
<br />
|---------<br />
| <center>[[File:La_foto5.JPG|150px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #100.58:'''<font color="#0000FF">''' Nida'''</font>.<br />
* '''Lugar:''' Alcala de Henares<br />
* '''Tipo:''' [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2 Prusa Iteration 2]<br />
* '''Autor:''' JJViton<br />
* '''Impresora progenitora:''' Clon #39 Daneel 3-law <br />
*'''Nacimiento:''' 10/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.3 RAMPS 1.3]<br />
* '''Firmware:''' Sprinter<br />
* '''Hot-End:''' Budas Gallego<br />
* '''Más info:''' [http://reprap.org/wiki/User:JvitonCW]<br />
<br />
|---------<br />
<br />
<br />
|---------<br />
| <center>[[File:Starken_big.JPG|150px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #159:'''<font color="#0000FF">''' Starken'''</font>.<br />
* '''Lugar:''' Valladolid<br />
* '''Tipo:''' [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2 Prusa Iteration 2]<br />
* '''Autor:''' Emilio José Morán Hevia<br />
* '''Impresora progenitora:''' Mardan<br />
*'''Nacimiento:''' 20/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' Sprinter<br />
* '''Hot-End:''' J-head<br />
* '''Más info:'''<br />
| <center>[[File:STARKEN_logo.jpg|150px]]</center><br />
|---------<br />
|---------<br />
|<center>[[File:Impresora_greenhornet.jpg|250px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #160:''' ''''''Green Hornet''''''<br />
* '''Lugar''':la laguna -Tenerife<br />
* '''Tipo''': Prusa i2 [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2]<br />
* '''Autor''': Andrés González Prérez<br />
* '''Impresora progenitora:[[Clone wars:Impresora X Wing|X-Wing]]<br />
**'''Nacimiento:''' 26/02/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Sprinter<br />
**'''Hot-End: J-HEAD MK IV <br />
** '''<font color="red">Pendiente:</font>'''<br />
*** Mejoras pantalla LCD<br />
*** Imprimir un juego de piezas completo para montar otro clon<br />
|<center>[[File:Green_hornet.jpg|250px]]</center><br />
<br />
<br />
<br />
<br />
|---------<br />
|---------<br />
|<center></center><br />
|<br />
* '''Clon #161:'''<font color="#0000FF">''' Ima'''</font>.<br />
* '''Lugar''':Ciudad Real<br />
* '''Tipo''': Prusa i2 <br />
* '''Autor''': Marciano de la Hoz<br />
* '''Impresora progenitora: Mardan<br />
**'''Nacimiento:''' 28/02/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Sprinter<br />
**'''Hot-End: J-HEAD MK IV modificado <br />
<br />
<br />
|<center></center><br />
<br />
<br />
<br />
|---------<br />
|---------<br />
|<center>[[File:Tramuntana3D.jpg|250px]]</center><br />
|<br />
* '''Clon #162:'''<font color="#0000FF">''' Tramuntana3D'''</font>.<br />
* '''Lugar''':Girona<br />
* '''Tipo''': Prusa I3 Single Plate Aluminio <br />
* '''Autor''': Lluís Vilarrúbies<br />
* '''Impresora progenitora: Ester Píscole<br />
**'''Nacimiento:''' 03/02/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Sprinter<br />
**'''Hot-End: budaschnozzle 1.2 0,5<br />
<br />
<br />
|<center>[[File:Obras.jpg|150px]]</center><br />
<br />
<br />
|---------<br />
|---------<br />
|<center>[[File:ImpresorahothI.JPG|250px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #163:'''<font color="#0000FF">''' Hoth I'''</font>.<br />
* '''Lugar''':Valencia<br />
* '''Tipo''': Prusa I2 <br />
* '''Autor''': Pau Chafer<br />
* '''Impresora progenitora: PacleMAKER<br />
**'''Nacimiento:''' 19/02/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Sprinter<br />
**'''Hot-End: PolacoNozzle<br />
<br />
<br />
|<center>[[File:LogoHoth1.jpg|250px]]</center><br />
<br />
<br />
<br />
|---------<br />
| <center>[[File:Obras.jpg|150px]]</center><br />
|<br />
<br />
* '''Clon #165:'''<font color="#0000FF">''' Goliath'''</font>.<br />
* '''Lugar''': Bilbao<br />
* '''Tipo''': Printrbot <br />
* '''Autor''': David Gonzalez (aka Ghosthawk)<br />
* '''Impresora progenitora: Tron<br />
**'''Nacimiento:''' 01/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End: Polaconozzle 0.5mm<br />
| <center>[[File:Goliath.gif|200px]]</center><br />
|---------<br />
| <center>[[File:ImpresoraKAZA.png|250px]]</center><br />
|<br />
* '''Clon #166:'''<font color="#0000FF">''' KAZA'''</font>.<br />
* '''Lugar''': Vigo (Alrededores más bien, pero bueno...XD)<br />
* '''Tipo''': Printrbot V2<br />
* '''Autor''': Valentín Cancelas, Gonzalo Alonso<br />
* '''Impresora progenitora: Gandalf the transparent ( Donación proyecto MultiExtruder )<br />
**'''Nacimiento:''' 03/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Sprinter<br />
**'''Hot-End: Polaconozzle<br />
| <center>[[File:Obras.jpg|150px]]</center><br />
|---------<br />
| <center>[[File:Obras.jpg|250px]]</center><br />
|<br />
* '''Clon #167:'''<font color="#0000FF">''' DRACO'''</font>.<br />
* '''Lugar''': Aguascalientes,Ags Mexico<br />
* '''Tipo''': Prusa I2<br />
* '''Autor''': Eduardo Alvarez<br />
* '''Impresora progenitora: MakerMex<br />
**'''Nacimiento:''' 03/02/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End: Polaconozzle<br />
| <center>[[File:Obras.jpg|150px]]</center><br />
|---------<br />
| <center>[[File:Obras.jpg|250px]]</center><br />
|<br />
* '''Clon #169:'''<font color="#0000FF">''' C-Wing'''</font>.<br />
* '''Lugar''': Manresa, España<br />
* '''Tipo''': Prusa I3<br />
* '''Autor''': [https://sites.google.com/a/pentabyte.es/chemadesigns/ Chema]<br />
* '''Impresora progenitora: Bumblebee<br />
**'''Nacimiento:''' 09/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End: Budas chino<br />
| <center>[[File:Chema.jpg|250px]]</center><br />
|---------<br />
| <center>[[File:Obras.jpg|250px]]</center><br />
|<br />
* '''Clon #170:'''<font color="#0000FF">''' B-Ri2-D2'''</font>.<br />
* '''Lugar''': Málaga<br />
* '''Tipo''': Prusa I2<br />
* '''Autor''': Israel Berrido Subires y Alejandro Berrido Suibires<br />
* '''Impresora progenitora: ¿?<br />
**'''Nacimiento:''' 10/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End: Budas Gallego (de Fidel)<br />
| <center>[[File:Obras.jpg|150px]]</center><br />
|---------<br />
| <center>[[File:Obras.jpg|150px]]</center> <br />
|* '''Clon #171:'''<font color="#0000FF">''' JENDRINATOR'''</font>.<br />
* '''Lugar''': Tarragona, España<br />
* '''Tipo''': Prusa I2<br />
* '''Autor''': AchornetCW (Adria Chornet)<br />
* '''Impresora progenitora: Michaelmas<br />
**'''Nacimiento:''' 12/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Sprinter<br />
**'''Hot-End: Polaco<br />
| <center> [[File:Logo_jendrinatorV1.jpg|150px]]</center><br />
|------<br />
| <center>[[File:Clon-172-UCOprinter.jpg|220px]]</center><br />
|<br />
* '''Clon #173''': '''<font color="#0000FF">UCOprinter</font>'''<br />
Pertenecio a la Reclone3d's Farm<br />
* '''Lugar''': Universidad de Córdoba<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 4<br />
* '''Autor''': Exergy123<br />
* '''Impresora Progenitora''': Y-Wing<br />
* Nacimiento: '''19/Enero/2013''' <br />
* [MÁS INFORMACIÓN]<br />
| <center>[[File:Logo_UCOprinter.jpg|200px]]</center><br />
|---------<br />
| <center>[[File:Clon-173-Pepabot.jpg|220px]]</center><br />
|<br />
* '''Clon #174''': '''<font color="#0000FF">Pepabot</font>'''<br />
* '''Lugar''': Universidad de Málaga<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 4<br />
* '''Autor''': Juanma Tirado<br />
* '''Impresora Progenitora''': Y-Wing<br />
* Nacimiento: '''19/Enero/2013''' <br />
* [MÁS INFORMACIÓN]<br />
| <center>[[File:Logo_Pepabot.jpg|200px]]</center><br />
|---------<br />
| <center>[[File:Clon-173-Z-Wing.jpg|220px]]</center><br />
|<br />
* '''Clon #175''': '''<font color="#0000FF">Z-Wing "El espíritu de Zaragoza</font>'''<br />
Pertenece a Reclone3d's Farm<br />
* '''Lugar''': Universidad de Málaga<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 4<br />
* '''Autor''': Exergy123<br />
* '''Impresora Progenitora''': Reclone3d's Farm(X-Wing, Y-Wing y UCOprinter)<br />
* Nacimiento: '''19/Enero/2013''' <br />
* [MÁS INFORMACIÓN]<br />
| <center>[[File:Logo_Z-Wing.jpg|200px]]</center><br />
|---------<br />
| <center>[[File:Ldp.jpg|250px]]</center><br />
|<br />
* '''Clon #176:'''<font color="#0000FF">''' AT-TE_LDP- '''</font>.<br />
* '''Lugar''': [http://ldp.etsii.upm.es Laboratorio Desarrollo de Productos. Lab Prototipado Rápido. ETSI Industriales. UPM]<br />
* '''Tipo''': Prusa I2<br />
* '''Generación''': 2<br />
* '''Autor''': Pedro Ortego<br />
* '''Impresora progenitora:''' [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R3 R3]<br />
** '''Nacimiento:''' 21/03/2013<br />
** '''Electrónica''': [http://reprap.org/wiki/RAMPS_1.3 RAMPS 1.3]<br />
** '''Firmware''': Sprinter<br />
** '''Hot-End''': Buda 0.5 Menextech<br />
| <center>[[File:LDP_Dim.jpg|150px]]</center><br />
|---------<br />
|------<br />
| <center>[[File:ribosome.jpg|250px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #177:'''[http://www.reprap.org/wiki/Clone_wars:_Impresora_Ribosome <font color="#0000FF">''' Ribosome'''</font>].<br />
* '''Lugar''': Madrid<br />
* '''Tipo''': Prusa i3 Box Frame<br />
* '''Autor''': [http://www.reprap.org/wiki/User:yOPERO yOPERO] <br />
* '''Impresora progenitora:''' [http://www.reprap.org/wiki/Clone_wars:Impresora_Uterus Uterus] <br />
**'''Nacimiento:''' 19/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End: Budas Chino de Fabster3d<br />
| <center>[[File:Ribosome_logo.jpg|250px]]</center><br />
|---------<br />
|------<br />
| <center>[[File:Prusikito.jpg|250px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #178:'''[http://www.reprap.org/wiki/Clone_wars:_Impresora_Prusikito ''' Prusikito''']<br />
* '''Lugar''': Getafe (Madrid)<br />
* '''Tipo''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Autor''': Fernando Murillo y Elena de Pedro<br />
* '''Impresora progenitora:''' [http://www.reprap.org/wiki/Clone_wars:Impresora_Manuela Manuela] <br />
* '''Generación''': 4<br />
**'''Nacimiento:''' 22/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End''': Budaschnozzle 1.2<br />
| <center>[[File:Logoprusikito.jpg|400px]]</center><br />
|---------<br />
|------<br />
| <center>[[File:Skullpt Foto.jpg|150px]]</center> <br />
Recorte: Chema<br />
|<br />
* '''Clon #179:'''<font color="#0000FF">''' -Skullpt-'''</font>.<br />
* '''Lugar''': Écija (Sevilla)<br />
* '''Tipo''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Autor''': [[User:RalvarezCW]]<br />
* '''Impresora progenitora:''' : ? <br />
* '''Generación''': ?<br />
**'''Nacimiento:''' 24/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Sprinter SuperEstable<br />
**'''Hot-End''': Budaschnozzle 1.3<br />
| <center>[[File:Skullpt logo.jpg|150px]]</center><br />
|------<br />
| <center>[[File:IronHide30.jpg|250px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #182:'''<font color="#0000FF">'''Iron Hide 3.0'''</font>.<br />
* '''Lugar''': Vírgen de Guadalupe (Badajoz)<br />
* '''Tipo''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 3<br />
* '''Autor''': Ismael De Miguel (Driftwr) <br />
* '''Impresora progenitora:''' ""IronHide"" <br />
* '''Generación''': <br />
**'''Nacimiento:''' ???<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' <br />
**'''Hot-End''': <br />
|<center>[[File:Obras.jpg|150px]]</center><br />
|---------<br />
|------<br />
|<center>[[File:tkl.jpg|200px]]</center><br />
|<br />
* '''Clon #183:'''<font color="#0000FF">'''- TKL 1.0 -'''</font>.<br />
* '''Lugar''': Madrid<br />
* '''Tipo''': [http://reprap.org/wiki/Prusa_Air_2] Air 2 - Iteration 2<br />
* '''Autor''': Angel Fdez (Trocolo) <br />
* '''Impresora progenitora:''' ""Bumblebee"" <br />
* '''Generación''': <br />
**'''Nacimiento:''' 21-03-13<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' <br />
**'''Hot-End''': Budas-Chino<br />
|<center>[[File:gallina.jpg|150px]]</center><br />
<center>Cubo de Calibracion</center><br />
|---------<br />
|<center>[[File:KalosW.JPG|200px]]</center> <br />
|<br />
* '''Clon #184''': [[Clone wars:_Impresora_Kalos|'''Kalos''']]<br />
* '''Lugar:''' Algeciras (Cádiz)<br />
* '''Familia''': [http://www.reprap.org/wiki/Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame Prusa Iteration 3 - Single Plate]<br />
* '''Generación''': 3<br />
* '''Autor:''' Mariano Dapía ([http://twitter.com/iPadNanito @iPadNanito])<br />
* '''Impresora progenitora:''' [[Clone wars:_Impresora_MayPrinter|'''MayPrintr''']]<br />
* '''Nacimiento:''' 28 de Marzo de 2013 <br />
* '''Electrónica''': [http://www.reprap.org/wiki/Sanguinololu Sanguinololu 1.3a]<br />
* '''Firmware''': [http://www.reprap.org/wiki/Marlin Marlin]<br />
* '''Extrusor''': [http://www.thingiverse.com/thing:18379 Jonas Kuehling's Greg's Wade Reloaded] (3 mm Plastic)<br />
* '''Hot-End''': [http://www.reprap.org/wiki/J-Head J-Head Nozzle]<br />
| <center>[[File:Jarron.png|135px]]</center><br />
|---------<br />
| <center>[[File:FotoPrintFloyd.jpg|150px]]</center> <br />
|<br />
* '''Clon #186:''' <font color="#0000FF">'''Print Floyd'''</font>.<br />
* '''Lugar''': Zaragoza.<br />
* '''Familia''': Prusa iteracción 2<br />
* '''Generación''': 3<br />
* '''Autor''': Jorge Pascual<br />
*'''Impresora progenitora''': Clon #121: 3D-Jam<br />
* '''Nacimiento:''' 7 de Abril de 2013<br />
* '''Electrónica''': [http://arduino.cc/en/Main/ArduinoBoardMega2560 Arduino Mega 2560] + [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Hot-End''': J-Head MK V<br />
* '''Firmware''': Marlin<br />
| <center>[[File:Print_Floyd.jpg|150px]]</center><br />
|---------<br />
| <center>[[File:bruce.jpg|200px]]</center> <br />
|<br />
* '''Clon #188:''' <font color="#0000FF">'''BruceIsPrinting'''</font>.<br />
* '''Lugar''': Pontedeume (A Coruña).<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 5<br />
* '''Autor''': [[User:pinwi|Pinwi]]<br />
*'''Impresora progenitora''': Clon #79: SpongeBot<br />
* '''Nacimiento:''' 10 de abril de 2013<br />
* '''Electrónica''': [[Ramps 1.4]]<br />
* '''Hot-End''': J-Head MkV<br />
* '''Firmware''': [[Sprinter]]<br />
| <center>[[File:bruce2.jpg|200px]]</center><br />
|-------------<br />
|<center>[[File:capitanestado.jpg|270px]]</center> <br />
|<br />
* '''Clon #189:''' <font color="#0000FF">'''CAPITAN CRUNCH'''</font>.<br />
* '''Lugar''': Santiago de Compostela.<br />
* '''Familia''': Prusa Iteracion 2<br />
* '''Autor''': [[Miguif (Miguel Federico)]]<br />
* '''Impresora progenitora''': Clon #32: Guaifi<br />
* '''Nacimiento''': 12 de abril de 2013<br />
* '''<font color="#0000FF">Componentes:</font>'''<br />
** Electrónica: Arduino Mega + Ramps 1.4.<br />
** Hot-end: Jhead.<br />
** Firmware: Sprinter Obijuan. <br />
|<center>[[File:capitancrunch.jpg|200px]]</center><br />
|-------------<br />
| <center>[[File:SAV_Vader.jpg|200px]]</center> <br />
|<br />
* '''Clon #192:''' <font color="#0000FF"> '''SAV Vader'''</font>.<br />
* '''Lugar:''' Madrid.<br />
* '''Tipo:''' Prusa i3<br />
* '''Autor:''' CACER (Familia Cervilla)<br />
* '''Impresora progenitora:''' Clon #136 Prusacervi.<br />
* '''Nacimiento:''' 13 de Abril de 2013<br />
* '''Electrónica''': [[Ramps 1.4]]<br />
* '''Hot-End''': Budas Gagget3D<br />
* '''Firmware''': Marlin<br />
<br />
|<center> [[File:Cacer.jpg|200px]]</center><br />
|--------<br />
| <center>[[File:WALLE.JPG|150px]]</center><br />
|<br />
* '''Clon #193:''' <font color="#0000FF"> '''WALL-E (Nº7)'''</font>.<br />
* '''Familia''': Prusa it3 Single Plate<br />
* '''Generación''': 3<br />
* '''Autor''': [http://www.mbrobotics.es/MbRobotics/Main.html MABLACK (Miguel Angel Berna Alberola)]<br />
* '''Impresora Progenitora''': [http://www.mbrobotics.es/Wiki/index.php?title=JOHNNY5 JOHNNY5] <br />
* '''Electrónica''': [http://reprap.org/wiki/Sanguinololu Sanguinololu]<br />
* '''Firmware''': [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Extrusor''': [http://reprap.org/wiki/Wade%27s_Geared_Extruder Wade's extruder] (plástico de 3mm)<br />
* '''Hot-End''': [http://reprap.org/wiki/J_Head_Nozzle J-Head Mk V-B Spania]<br />
* '''Nacimiento:''' 06 de Abril de 2013<br />
| <center>[[File:Walle.jpg|200px]]</center><br />
|--------<br />
<br />
| <center>[[File:Printy.jpg|150px]]</center><br />
|<br />
* '''Clon #194:''' <font color="#0000FF"> '''Printy'''</font>.<br />
* '''Modelo''': Prusa Mendel (it 2)<br />
* '''Autor''': Ruben Ferrero<br />
* '''Lugar''': Leon<br />
* '''Impresora Progenitora''': Clon #155: CAZURRA <br />
* '''Electrónica''': [http://reprap.org/wiki/Sanguinololu Sanguinololu]<br />
* '''Firmware''': Sprinter super-estable<br />
* '''Hot-End''': J-Head Mk IV<br />
* '''Nacimiento:''' 17 de Abril de 2013<br />
| <center>[[File:RFerrero.jpg|200px]]</center><br />
|--------<br />
<br />
| <center></center><br />
|<br />
* '''Clon #195:''' <font color="#0000FF"> '''Paco Prime'''</font>.<br />
* '''Modelo''': Prusa Mendel (it 2)<br />
* '''Autor''': David Leal<br />
* '''Lugar''': Málaga / San Sebastián<br />
* '''Impresora Progenitora''': Air2 Desconocida.-<br />
* '''Electrónica''': Ramps 1.4/Mega<br />
* '''Firmware''': Marlin/Sprinter<br />
* '''Hot-End''': Hispania<br />
* '''Nacimiento:''' 20 de Abril de 2013<br />
| <center></center><br />
|--------<br />
<br />
| <center>[[File:dalek sec foto.jpg|250px]]</center><br />
|<br />
* '''Clon #196:''' <font color="#0000FF"> '''Dalek_Sec'''</font>.<br />
* '''Modelo''': Prusa Mendel Iteración 2<br />
* '''Autor''': Manu Barranco<br />
* '''Lugar''': Madrid<br />
* '''Impresora Progenitora''': JJMachine<br />
* '''Electrónica''': Ramps 1.4/Mega<br />
* '''Firmware''': Sprinter.<br />
* '''Hot-End''': J-Head Mk V-BV 0.5mm<br />
* '''Nacimiento:''' 22 de Abril de 2013<br />
| <center>[[File:dalek sec.jpg|200px]]</center><br />
|--------<br />
| <center></center><br />
|<br />
* '''Clon #197:''' <font color="#0000FF"> '''Eprintnefrina'''</font>.<br />
* '''Modelo''': Prusa Mendel v1<br />
* '''Autor''': Maria Lopez y Angel Ruiz<br />
* '''Lugar''': Melilla<br />
* '''Impresora Progenitora''': Desconocido<br />
* '''Electrónica''': Ramps 1.3/Mega<br />
* '''Firmware''': Sprinter.<br />
* '''Hot-End''': Buda Gallego<br />
* '''Nacimiento:''' 18 de Abril de 2013<br />
| <center>[[File:epinefrina.jpg|200px]]</center><br />
|--------<br />
| <center>[[File:Spica01.jpg|150px]]</center> <br />
|<br />
* '''Clon #199:''' <font color="#0000FF"> '''Spica'''</font>.<br />
* '''Modelo''': Prusa i3<br />
* '''Autor''': Adrián Alonso [[User: Aalonso]] - Luis Macías [[User: LmaciasCW]]<br />
* '''Lugar''': Madrid<br />
* '''Impresora Progenitora''': Moebius. [http://www.reprap.org/wiki/Clone_wars_Impresora_Moebius]<br />
* '''Electrónica''': Ramps 1.4/Mega<br />
* '''Firmware''': Sprinter superstable.<br />
* '''Hot-End''': Budas Gallego 0.4mm<br />
* '''Nacimiento:''' 19/03/2013.<br />
* [[Clone wars Impresora Spica|Mas información]]<br />
| <center>[[File:Spica.jpg|150px]]</center> <br />
|--------<br />
| <center></center><br />
|<br />
* '''Clon #200''': '''<font color="#0000FF">CopyPrintBot</font>'''<br />
* '''Modelo''': Prusa i2<br />
* '''Autor''': Grunin Nano [[User: Grunin]]<br />
* '''Lugar''': Barcelona<br />
* '''Impresora progenitora''': [[Clone_wars:Impresora_Michaelmas]]<br />
* '''Nacimiento''': 02/05/2013<br />
* '''Electrónica''': Ramps 1.4 <br />
* '''Firmware''': Sprinter<br />
* '''Hot-End''': J-Head 0.4mm<br />
| <center></center><br />
|-------------<br />
| <center>[[File:printfles_3.jpg|150px]]</center> <br />
|<br />
* '''Clon #201''': '''<font color="#0000FF">PrintFles</font>'''<br />
* '''Modelo''': Prusa i2<br />
* '''Autor''': Pablo Bosch[[User: Pifles]]<br />
* '''Lugar''': Madrid (Collado Villalba)<br />
* '''Impresora progenitora''': [[Desconocida]]<br />
* '''Nacimiento''': 28/04/2013<br />
* '''Electrónica''': Ramps 1.4 <br />
* '''Firmware''': Marlin<br />
* '''Hot-End''': Buda Chino 0.5mm<br />
| <center>[[File:printfles_4.jpg|150px]]</center> <br />
| <center></center><br />
|-------------<br />
|<center>[[File:Prusaneurobot.png|200px]]</center> <br />
|<br />
* '''Clon #203''': '''<font color="#0000FF">NeuroBot</font>'''<br />
* Lugar: Granada<br />
* Tipo: Prusa i2<br />
* Impresora progenitora: Avatar (jrdetoro)<br />
* Autor : JtorralbaCW (Jose M Torralba)<br />
* Nacimiento''': 4/05/2013<br />
* Electrónica''': Ramps 1.4 (Taurino)<br />
* Firmware''': Sprinter<br />
* Hot-End''': Budas Gallego<br />
* [http://reprap.org/wiki/Clone_Wars:_Impresora_NeuroBot MAS INFORMACIÓN]<br />
<br />
|<center>[[File:Granadaimprusa.jpg|200px]]</center> <br />
<br />
|------------- <br />
|<center>[[blu3.png|200px]]</center><br />
|<br />
* '''Clon #204''': '''<font color="#0000FF">BLU3</font>'''<br />
* '''Modelo''': Prusa IT2<br />
* '''Autor''': Grupo M2 Asociación de Robótica Educativa Complubot<br />
* '''Lugar''': Alcalá de Henares - Madrid<br />
* '''Impresora progenitora''': [[Carbonite]]<br />
* '''Nacimiento''': 04/05/2013<br />
* '''Electrónica''': Ramps 1.4 <br />
* '''Firmware''': Marlin<br />
* '''Hot-End''': J-Head MkVB<br />
|<center> [[File:Avatar_complubot.png|150px|link=http://www.complubot.org]]</center><br />
<br />
<br />
|------------- <br />
|<center>[[Sin título 1.jpg|200px]]</center><br />
|<br />
* '''Clon #205''': '''<font color="#0000FF">Sin título 1</font>'''<br />
* '''Modelo''': Prusa i3<br />
* '''Autor''': OskarLGS<br />
* '''Lugar''': Cantabria<br />
* '''Impresora progenitora''': Desconocida<br />
* '''Nacimiento''': 5/05/2013<br />
* '''Electrónica''': Sanguinololu 1.3a<br />
* '''Firmware''': Sprinter<br />
* '''Hot-End''': FaryNozzle 2.0<br />
|<center></center><br />
<br />
|------------- <br />
|<center>[[File:Prusa 2 GADES 1imp.jpg|150px]]</center><br />
|<br />
* '''Clon #206''' '''<font color="#0000FF">GADES</font>'''<br />
* Lugar: Cádiz <br />
* Tipo: Prusa Interación 2<br />
* Autor: Rafa Pinilla<br />
* Impresora progenitora: [[Clone wars:Impresora X Wing|X-Wing]]<br />
* '''Nacimiento''': 5/05/2013<br />
* '''Electrónica''': Ramps 1.4<br />
* '''Firmware''': Sprinter Superestable<br />
* '''Hot-End''': J-Head MkVB <br />
|<center></center><br />
|---------<br />
| <center></center> <br />
|<br />
* '''Clon #207''': <font color="#0000FF">Prusimus Prime</font><br />
* '''Lugar''': Mollet del Vallès (Barcelona)<br />
* '''Familia''': Prusa i3 Box Frame<br />
* '''Autores''': Ariadna Trueba y Juan Pedro López<br />
* '''Impresora progenitora''': Alguna de las de Javier Briz :)<br />
* '''Nacimiento''': 08-May-2013<br />
* '''Descendencia''': -<br />
* [[Clone Wars:Impresora Prusimus prime|MÁS INFORMACIÓN]]<br />
| | <center></center> <br />
|---------<br />
| <center></center><br />
|<br />
* '''Clon #208''': <font color="#0000FF">ROBOTIJO</font><br />
* '''Lugar''': ALICANTE<br />
* '''Modelo''': Prusa Interacion 2<br />
* '''Autor''': Paco Martinez<br />
* '''Impresora progenitora''': [[Clone UA]]<br />
* '''Nacimiento''': 09/4/2013<br />
* '''Electrónica''': Ramps 1.4<br />
* '''Firmware''': Marlin<br />
* '''Hot-End''': J- HEAD HISPANIA<br />
<br />
|------------- <br />
|<center>[[File:DAISY.jpg|150px]]</center><br />
|<br />
* '''Clon #209''' '''<font color="#0000FF">DAISY</font>'''<br />
* '"Lugar'": Alcalá de Henares (Madrid)<br />
* '"Tipo'": Prusa Interación 2<br />
* '"Autor'": Sergio García<br />
* '"Impresora progenitora'": [[R5D5]]<br />
* '''Nacimiento''': 12/5/2013<br />
* '''Electrónica''': Ramps 1.4<br />
* '''Firmware''': Sprinter Superestable<br />
* '''Hot-End''': J-Head Hispania<br />
|<center>[[File:DAISY2.jpg|270px]]</center><br />
|---------<br />
<br />
|------------- <br />
|<center>[[File:Prusa_i3_mini.jpg|250px]]</center><br />
|<br />
* '''Clon #210''': '''<font color="#0000FF">Delorean</font>'''<br />
* '''Modelo''': Prusa i3 box modificada<br />
* '''Autor''': Jose Julio<br />
* '''Lugar''': Tenerife<br />
* '''Impresora progenitora''': Esther píscole<br />
* '''Generación''': 4<br />
* '''Nacimiento''': 12/05/2013<br />
* '''Electrónica''': RAMPS 1.4<br />
* '''Firmware''': Marlin<br />
* '''Hot-End''': FaryNozzle 2.0<br />
|<center>[[File:Jj_perfil.jpg|100px]]</center><br />
|-------------<br />
| <center>[[File:PrintrBot_cableada.jpg|150px]]</center> <br />
|<br />
* '''Clon #211''': '''<font color="#0000FF">Chubaca</font>'''<br />
* '''Modelo''': PrintrBot<br />
* '''Autor''': Enrique Rodríguez<br />
* '''Lugar''': Madrid<br />
* '''Impresora progenitora''': Paclemaker<br />
* '''Nacimiento''': 16/05/2013<br />
* '''Electrónica''': Sanguinololu 1.3a<br />
* '''Firmware''': Marlin<br />
* '''Hot-End''': Polaco<br />
|<center> [[File:3Dchewie.jpg|150px]]</center><br />
|-------------<br />
| <center>[[File:Obras.jpg|150px]]</center> <br />
|<br />
* '''Clon #212''': '''<font color="#0000FF">Destriers</font>'''<br />
* '''Modelo''': Prusa I2<br />
* '''Autor''': Jose Raul Montero<br />
* '''Lugar''': Málaga<br />
* '''Impresora progenitora''': [[Clone wars: Telchar|Telchar]]<br />
* '''Nacimiento''': 18/05/2013<br />
* '''Electrónica''': RAMPS 1.4<br />
* '''Firmware''': Sprinter Superestable<br />
* '''Hot-End''': Chino<br />
|<center> [[File:Obras.jpg|150px]]</center><br />
<br />
|--------<br />
| <center>[[File:Corbusi.jpg|250px]]</center> <br />
|<br />
* '''Clon #213''': '''<font color="#0000FF">Le Corbu</font>'''<br />
* '''Modelo''': Prusa I2<br />
* '''Autor''': Alberto Martinez <br />
* '''Lugar''': Zaragoza<br />
* '''Impresora progenitora''': [[Clone wars:Impresora Geek-X-truder|Geek-X-Truder]]<br />
* '''Nacimiento''': 25/05/2013<br />
* '''Electrónica''': RAMPS 1.4<br />
* '''Firmware''': Sprinter Superestable<br />
* '''Hot-End''': FaryNozzle 2.0<br />
<br />
|<center> [[File:Corbusier.jpg|150px]]</center><br />
|<br />
|-------------<br />
|<center>[[File:RoyBatty.JPG|250px]]</center><br />
|<br />
* '''Clon #214''': '''<font color="#0000FF">Roy Batty</font>'''<br />
* '''Modelo''': Prusa I2<br />
* '''Autor''': Juan Moreno<br />
* '''Lugar''': Vitoria<br />
* '''Impresora progenitora''': [[Clone wars:Impresora R5D5|R5D5]]<br />
* '''Nacimiento''': 08/05/2013<br />
* '''Electrónica''': RAMPS 1.4<br />
* '''Firmware''': Sprinter Superestable<br />
* '''Hot-End''': SPBudas<br />
<br />
|<center> [[File:RoyBatty2.JPG|150px]]</center><br />
|<br />
|-------------<br />
|<center>[[File:Bolisa.JPG|250px]]</center><br />
|<br />
* '''Clon #215''': '''<font color="#0000FF">Bolisa</font>'''<br />
* '''Modelo''': Prusa I2<br />
* '''Autor''': Cipri Ballester<br />
* '''Lugar''': Zaragoza<br />
* '''Impresora progenitora''': [[Clone wars:Impresora Giskard|Giskard]]<br />
* '''Nacimiento''': 29/04/2013<br />
* '''Electrónica''': Arduino MEGA / RAMPS 1.4<br />
* '''Firmware''': Sprinter Superestable<br />
* '''Extrusor''': Jonaskuehling extruder<br />
* '''Hot-End''': FaryBudas<br />
<br />
| <center> [[File:galaxian.jpg|250px]]</center><br />
|<br />
|-------------<br />
| <center>[[File:OrionNoB.jpg|250px]]</center><br />
|<br />
* '''Clon #216''': '''<font color="#0000FF">Orion</font>'''<br />
* '''Modelo''': Prusa Air 2<br />
* '''Autor''': Daniel Lopez<br />
* '''Lugar''': Madrid<br />
* '''Impresora Progenitora''': [[Impresora Progenitora: Demiurgo|Demiurgo]] y [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]]<br />
* '''Nacimiento''': '''30/Septiembre/2012'''<br />
* '''Electrónica''': sanguinololu<br />
* '''Firmware''': Sprinter <br />
* '''Extrusor''': Jonaskuehling extruder<br />
* '''Hot-End''': J-head<br />
<br />
<br />
| <center> [[File:NebOrion.jpg|250px]]</center><br />
|<br />
|---------<br />
| <center>[[File:Clon-217-SpongeBot_Reloaded_.png|200px]]</center> <br />
|<br />
* '''Clon #218''': <font color="#0000FF">SpongeBot Reloaded</font><br />
* '''Lugar''': A coruña<br />
* '''Familia''': Prusa i3<br />
* '''Generación''': 6<br />
* '''Autor''': Alejandro Taracido (TCRobotics)<br />
* '''Impresora progenitora''': Clon #187: Super 8<br />
* '''Nacimiento''': 01/Jun/2013<br />
* '''Descendencia''': Próximamente!<br />
| <center>[[File:Spongebot-logo.png| 150px]]</center> <br />
|---------<br />
<br />
|---------<br />
| <center>[[File:Prusai2sprint.jpg|250px]]</center> <br />
|<br />
* '''Clon #219''': <font color="#0000FF">Sprintfield</font><br />
* '''Lugar''': Sevilla<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 4º<br />
* '''Autor''': Alvaro Luna (AlunaCW)<br />
* '''Impresora progenitora''': Clon #30: X-Wing y Clon #55: Y-Wing<br />
* '''Nacimiento''': 31/Mayo/2013<br />
* '''Descendencia''': Próximamente!<br />
* '''Electrónica''': ARDUINO MEGA / RAMPS 1.4<br />
* '''Firmware''': Marlin <br />
* '''Extrusor''': Jonaskuehling extruder<br />
* '''Hot-End''': J-head V<br />
| <center>[[File:Sprintfield.jpg| 150px]]</center> <br />
|---------<br />
| <center>[[File:modificado.jpg| 250px]]</center> <br />
|<br />
* '''Clon #220''': <font color="#0000FF">Geth</font><br />
* '''Lugar''': Sabadell<br />
* '''Familia''': Prusa i3<br />
* '''Generación''': 4<br />
* '''Autor''': José María Garrocho (Jmgarrocho)<br />
* '''Impresora progenitora''': Clon #135: hydra<br />
* '''Nacimiento''': 09/Junio/2013<br />
* '''Descendencia''': Próximamente!<br />
* '''Electrónica''': ARDUINO MEGA / RAMPS 1.4<br />
* '''Firmware''': Marlin <br />
* '''Extrusor''': Jonaskuehling extruder<br />
* '''Hot-End''': E3D-v4.1<br />
| <center>[[File:|291930101503003238316458581109164480429571176420903n.jpg 150px]]</center> <br />
|---------<br />
| <center>[[File:IG-88.jpg|150px]]</center> <br />
|<br />
* Nombre: '''#221 IG-88'''<br />
* Lugar: Oleiros<br />
* Tipo: Prusa i2<br />
* Generación: 5ª<br />
* Autor: Xarpe Serpe<br />
* Impresora progenitora: SpongeBot [Alejandro Taracido (TCRobotics)]<br />
* '''<font color="#0000FF">Estado:</font>'''<br />
**Aprendiendo los trucos de la impresión.<br />
**Pensando sistema de ajuste a mesa no horizontal.<br />
**Iniciando impresión de piezas I3 para donación.<br />
| <center> [[File:IG-88.jpg|150px]]</center><br />
|-------------<br />
| <center>[[File:Clon_nono.jpg|150px]]</center> <br />
|<br />
* '''Clon #222''': <font color="#0000FF">Nono</font><br />
* '''Lugar''': Alicante<br />
* '''Modelo''': Prusa i3 <br />
* '''Generación''': 4ª<br />
* '''Autor''': Paco Gallud<br />
* '''Impresora progenitora''': ROBOTIJO<br />
* '''Nacimiento''': 10/6/2013<br />
* '''Electrónica''': Ramps 1.4<br />
* '''Firmware''': Marlin<br />
* '''Hot-End''': E3D<br />
| <center>[[File:nono.jpg|150px]]</center> <br />
|---------<br />
| <center>[[File:TelarBot1.jpg|220px]]</center> <br />
|<br />
* '''Clon #223''': <font color="#0000FF">TelarBot</font><br />
* '''Lugar''': Zamora-Soria<br />
* '''Modelo''': Prusa i2 <br />
* '''Generación''': 4ª<br />
* '''Autor''': Julian Garcia<br />
* '''Impresora progenitora''': Esterpiscole<br />
* '''Nacimiento''': 07/6/2013<br />
* '''Electrónica''': Ramps 1.4<br />
* '''Firmware''': Sprinter<br />
* '''Hot-End''': PrusaNozzle<br />
| <center>[[File:Telarbotplaca.jpg|280px]]</center> <br />
|---------<br />
| <center>[[File:Gutemberg.jpg|220px]]</center> <br />
|<br />
* '''Clon #224''': <font color="#0000FF">Gutenberg</font><br />
* '''Lugar''': Zaragoza (Arduteka)<br />
* '''Modelo''': Prusa IT3 <br />
* '''Generación''': 5ª<br />
* '''Autores''': Javier Montesa, José Luis Poza y Ricardo Pérez<br />
* '''Impresora progenitora''': Gandalf y Geek-x-truder.<br />
* '''Nacimiento''': 18/5/2013<br />
* '''Electrónica''': Sanguinololu 1.3a<br />
* '''Firmware''': Marlin-Marlin v.1<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': BudaschNozzle 2.0<br />
| <center>[[File:Gutenberg.png|280px]]</center> <br />
|---------<br />
| <center>[[File:Imprusora_Filosofal.jpg|220px]]</center> <br />
|<br />
* '''Clon #225''': <font color="#0000FF">Imprusora Filosofal</font><br />
* '''Lugar''': Real Cortijo de San Isidro<br />
* '''Modelo''': Prusa IT3 <br />
* '''Autores''': Sergio MC (Gracias a Nines)<br />
* '''Impresora progenitora''': Giskard.<br />
* '''Nacimiento''': 18/6/2013<br />
* '''Electrónica''': Ramps 1.4<br />
* '''Firmware''': Marlin-Marlin v.1<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': PrusaNozzle 0.1<br />
| <center>[[File:Logo_Filosofal.png]]</center> <br />
|---------<br />
| <center>[[File:Bender_1.0.JPG|200px]]</center><br />
|<br />
* '''Clon #227''': <font color="#0000FF">Bender 1.0</font><br />
* '''Lugar''': Huelva<br />
* '''Modelo''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] (iteración 2)<br />
* '''Generación''': 5ª<br />
* '''Autor''': Iván Ramírez Beltrán<br />
* '''Impresora progenitora''': Giskard (Generación 4ª)<br />
** '''Nacimiento''': 29/06/2013<br />
** '''Electrónica''': Arduino Mega + Ramps 1.4<br />
** '''Firmware''': Sprinter<br />
** '''Extrusor''': Jonaskuehling<br />
** '''Hot-End''': Buda-style v1.2<br />
| <center>[[File:Bender_aplausos.jpg|250px]]</center><br />
|---------<br />
| <center>[[File:DELOREAN-QueNoWert-225x300.jpeg ]]</center><br />
|<br />
* '''Clon #229''' : <font color="#0000FF"> deLOReAn </font><br />
* '''Lugar''' : Lora del Rio. Sevilla. <br />
* '''Modelo''' : Prusa Air 2 ( Kit LEAPto3D)<br />
* '''Generación''': 5ª (Duda)<br />
* '''Autor''' : Enrique González Lafuente (QueNoWert)<br />
* '''Impresora progenitora''': Desconocida<br />
** '''Nacimiento''' : 17/06/2013<br />
** '''Electrónica''': Sanguinololu 1.3b y Pololus<br />
** '''Firmware''' : Sprinter y Marlin (GNU/Linux Linux Mint)<br />
** '''Software''' : Printun - Cura -host+ Skeinforge (GNU/Linux Linux Mint)<br />
** '''Extrusor''' : Jonaskuehling Jonaskuehling 3mm<br />
** '''Hot-End''' : J-Head MKV 3mm, boquilla: 0,5mm<br />
| <center>[[File:000000.jpg]]</center><br />
|---------<br />
| <center>[[File:00000.jpg ]]</center><br />
|<br />
* '''Clon #230''' : <font color="#0000FF"> Malospelos </font><br />
* '''Lugar''' : San Sebastian de los Reyes. Madrid. <br />
* '''Modelo''' : Prusa IT 2 <br />
* '''Generación''': 3ª o 4ª (piezas compradas en reclone3d por tanto hija de xwing o Ywing)<br />
* '''Autor''' : Felix Arias<br />
* '''Impresora progenitora''': Reclone3d Farm<br />
** '''Nacimiento''' : 2/07/2013<br />
** '''Electrónica''': Arduino Mega + Ramps 1.4<br />
** '''Firmware''' : Sprinter<br />
** '''Extrusor''' : Jonaskuehling 3mm<br />
** '''Hot-End''' : J-Head Hispania 3mm, boquilla: 0,5mm<br />
| <center>[[File:malospelos.jpg]]</center><br />
|---------<br />
| <center>[[File:Cl4p-tp.jpg ]]</center><br />
|<br />
* '''Clon #231''' : <font color="#0000FF"> CL4P-TP </font><br />
* '''Lugar''' : Barcelona ciudad <br />
* '''Modelo''' : Prusa IT 2 <br />
* '''Generación''': 3ª<br />
* '''Autor''' : Martí Serra (XvapX)<br />
* '''Impresora progenitora''': Desconocido<br />
** '''Nacimiento''' : 15/06/2013<br />
** '''Electrónica''': Arduino Mega + Ramps 1.4<br />
** '''Firmware''' : Marlin<br />
** '''Extrusor''' : Jonaskuehling 3mm<br />
** '''Hot-End''' : Budaschnozzle 1.2 3mm, boquilla: 0,5mm<br />
| <center>[[File:claptrap.jpg]]</center><br />
|---------<br />
|<center>[[File:forrata2.jpg ]]</center><br />
|<br />
* '''Clon #232''' : <font color="#0000FF"> FORRATA </font><br />
* '''Lugar''' : Madrid<br />
* '''Modelo''' : Prusa IT 2 <br />
* '''Generación''': 3ª<br />
* '''Autor''' : David Alonso (DAlonsoCW)<br />
* '''Impresora progenitora''': Mardan<br />
** '''Nacimiento''' : 06/07/2013<br />
** '''Electrónica''': Arduino Mega + Ramps 1.4<br />
** '''Firmware''' : Sprinter superstable<br />
** '''Extrusor''' : Jonaskuehling 3mm<br />
** '''Hot-End''' : Budas chino 3mm, boquilla: 0,4mm<br />
|<center>[[File:Tesla3.jpg ]]</center><br />
|---------<br />
|<center>[[File:prisma.jpg|150px]]</center><br />
|<br />
* '''Clon #233''' : <font color="#0000FF"> Prisma IT3 </font><br />
* '''Lugar''' : Malaga<br />
* '''Modelo''' : Prusa IT 3 <br />
* '''Generación''': 4ª<br />
* '''Autor''' : prisma_cw<br />
* '''Impresora progenitora''': Telchar<br />
* '''Nacimiento''' : 15/07/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Sprinter superstable<br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : JHead Hispania 0.5<br />
|<center>[[File:avatar_prisma.jpg|250px]]</center><br />
|---------<br />
|<center>[[File:EWOK IT2.JPG|150px]]</center><br />
|<br />
* '''Clon #234''' : <font color="#0000FF"> EWOK </font><br />
* '''Lugar''' : Girona<br />
* '''Modelo''' : Prusa IT 2 <br />
* '''Autor''' : Sushimarc<br />
* '''Impresora progenitora''': Manuel Sanchez Amores<br />
* '''Nacimiento''' : 06/07/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Sprinter superstable<br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : JHead MK4 MKIV <br />
|<center>[[File:Ewok.jpg|250px]]</center><br />
|---------<br />
|<center>[[File:Solo_001_Thumb.jpg|250px]]</center><br />
|<br />
* '''Clon #235''' : <font color="#0000FF"> Solo </font><br />
* '''Lugar''' : Girona<br />
* '''Modelo''' : Prusa i2 <br />
* '''Autor''' : Josep Ponce [JponceCW] [tra7montana]<br />
* '''Impresora progenittora''': placeMAKER<br />
* '''Nacimiento''' : 16/07/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Sprinter superstable<br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : Budaschnozzle 1.2 3mm, boquilla: 0,5mm <br />
*[http://www.reprap.org/wiki/Clone_wars:Impresora_J%26JSolo MÁS INFORMACIÓN]<br />
|<center>[[File:Solo_Construccio_AAA_CubCalibracio.jpg|250px]]</center><br />
|---------<br />
|<center>[[File:TATU.jpg|250px]]</center><br />
|<br />
* '''Clon #236''' : <font color="#0000FF"> TATU</font><br />
* '''Lugar''' : Girona<br />
* '''Modelo''' : Prusa IT 3 <br />
* '''Autor''' : Tatuin<br />
* '''Impresora progenitora''': Desconocido<br />
* '''Nacimiento''' : 25/06/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Sprinter superstable<br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : JHead MK4 MKIV <br />
|<center>[[File:TATU.jpg|250px]]</center><br />
|---------<br />
|<center>[[A falta de foto]]</center><br />
|<br />
* '''Clon #237''' : <font color="#0000FF"> TATU</font><br />
* '''Lugar''' : Baena (Córdoba)<br />
* '''Modelo''' : Prusa IT 3 <br />
* '''Autor''' : Iniciativas 3d<br />
* '''Impresora progenitora''': Desconocido<br />
* '''Nacimiento''' : 19/07/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : G3D Budas style <br />
|<center>[[File:I3dgrande.png]]</center><br />
|---------<br />
|<center>[[A falta de foto]]</center><br />
|<br />
* '''Clon #238''' : <font color="#0000FF"> FrankenPrusa</font><br />
* '''Lugar''' : Burgos<br />
* '''Familia''' : Mendel Prusa Iteración 2<br />
* '''Generación''' : 6<br />
* '''Autor''' : Juan García Rodríguez / David Mayor Fernandez<br />
* '''Impresora progenitora''': VENTURPRINT<br />
* '''Nacimiento''' : 01/06/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling V5/V6 3mm<br />
* '''Hot-End''' : Polaco 0.5mm <br />
|<center>[[A falta de foto]]</center><br />
|---------<br />
|<center>[[File:prusanoa.jpg|250px]]</center><br />
|<br />
* '''Clon #239''' : <font color="#0000FF"> NOA Prusa</font><br />
* '''Lugar''' : Zamora<br />
* '''Familia''' : Mendel Prusa Iteración 2<br />
* '''Generación''' : 5<br />
* '''Autor''' : Adolfo Castaño<br />
* '''Impresora progenitora''': Lucas Clon<br />
* '''Nacimiento''' : 29/06/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Sprinter <br />
* '''Extrusor''' : Jonaskuehling V5/V6 3mm<br />
* '''Hot-End''' : J-Head MKV 3mm, boquilla: 0,5mm<br />
|<center>[[File:clonelucasyyo.jpg|250px]]</center><br />
|---------<br />
|<center>[[File:ImprusinhoConPeza.jpg|250px]]</center><br />
|<br />
* '''Clon #240''' : <font color="#0000FF">Imprusiño</font><br />
* '''Lugar''' : CPI de Atios - Valdoviño (A Coruña)<br />
* '''Familia''' : Prusa Iteración 2<br />
* '''Generación''' : 2<br />
* '''Autor''' : Equipo Imprusiño: Iván, Kevin, Pablo, María, Rita, Cris e Lydia<br />
* '''Impresora progenitora''': PacleMaker<br />
* '''Nacimiento''' : 03/05/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Sprinter <br />
* '''Extrusor''' : Jonaskuehling V5/V6 3mm<br />
* '''Hot-End''' : PrusaNozzle 0.4<br />
|<center>[[File:EquipoImprusinho.jpg|300px]]</center><br />
|---------<br />
|<center>[[File:DSC_0417.jpg|300px]]</center><br />
|<br />
* '''Clon #241''' : <font color="#0000FF">Tantive IV</font><br />
* '''Lugar''' : Astigarraga, Gipuzkoa'''<br />
* '''Familia''' : Prusa Iteración 2'''<br />
* '''Autor''' : Victor Barahona - Sir Galaxy[[User:VbarahonaCW]]<br />
* '''Impresora progenitora''': JAR JAR 140<br />
* '''Nacimiento''' : 20/7/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling V5/V6 3mm<br />
* '''Hot-End''' : J-Head MKV 3mm, boquilla: 0,5mm<br />
|<center>[[File:Tantive4.jpg|300px]]</center> <br />
|---------<br />
|<center>[[File:2013-07-27-1660.jpg|300px]]</center><br />
|<br />
* '''Clon #242''' : <font color="#0000FF">PrusaMod</font><br />
* '''Lugar''' : Santa Cruz de Bezana, Cantabria'''<br />
* '''Familia''' : Prusa Iteración 2'''<br />
* '''Autor''': Vicente Centeno [[User:Chentinox | (ChentinoX)]]<br />
* '''Impresora progenitora''': Toxina<br />
* '''Nacimiento''' : 30/6/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Marlin<br />
* '''Extrusor''' : Jonaskuehling V5<br />
* '''Hot-End''' : J-Head MKV 3mm, boquilla: 0,5mm<br />
|<center>[[File:2013-07-27-1654.jpg|300px]]</center> <br />
|---------<br />
|<center>[[File:General grevious prusa II.jpg|300px]]</center><br />
|<br />
* '''Clon #243''' : <font color="#0000FF"> General Grevious Prusa II</font><br />
* '''Lugar''' : Granada'''<br />
* '''Familia''' : Prusa Iteración II'''<br />
* '''Autor''': Juan Carlos Joya Clares <br />
* '''Nacimiento''' : Nacimiento Oficial 3 de Julio de 2013 Conferencia de Granada Imprusa<br />
* '''Electrónica''': Sanguinololu 1.3b + Pololus<br />
* '''Firmware''' : Sprinter <br />
* '''Hot-End''' : J-Head Hispania, boquilla: 0,5mm<br />
* '''Impresora progenitora''': GrBot3D http://www.reprap.org/wiki/Clone_Wars:_Impresora_GrBot3D<br />
* '''[[Clone Wars: General_Grevious|MÁS INFORMACIÓN]]<br />
|<center>[[File:General.jpg|300px]]</center> <br />
|---------<br />
|<center>[[File:TalaPrusa.png|300px]]</center><br />
|<br />
* '''Clon #244''' : <font color="#0000FF"> TalaPrusa</font><br />
* '''Lugar''' : Talavera de la Reina (Toledo)<br />
* '''Familia''' : Mendel Prusa Iteración 3<br />
* '''Autor''' : Antonio Navarro<br />
* '''Nacimiento''' : 11/08/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : Budaschnozzle 2.0 3mm, boquilla: 0,35mm <br />
|<center>[[A falta de foto]]</center><br />
|---------<br />
|<center>[[File:K-9-YA.JPG|300px]]</center><br />
|<br />
* '''Clon #245''' : <font color="#0000FF"> K-9-YA</font> https://groups.google.com/forum/?fromgroups=#!topic/asrob-uc3m-impresoras-3d/Ti6OHaZ1szc<br />
* '''Lugar''' : Burgos<br />
* '''Familia''' : Mendel Prusa Iteración 3<br />
* '''Autor''' : Manuel Lucio<br />
* '''Nacimiento''' : 22/08/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : Prusa Nozzle 4mm<br />
* '''Impresora progenitora''': Ironhide 3.0 http://www.reprap.org/wiki/File:IronHide30.jpg<br />
|<center>[[File:K-9-YA-Logo.jpg|300px]]</center><br />
|---------<br />
|<center>[[File:Paxpan3dimp.jpg|260px]]</center><br />
|<br />
* '''Clon #247''' : <font color="#0000FF"> Paxpan 3D</font><br />
* '''Lugar''' : Artziniega (Alava)<br />
* '''Familia''' : Mendel Prusa Iteración 3<br />
* '''Autor''' : Guillermo Velasco (GvelascoCW)<br />
* '''Nacimiento''' : 25 de Agosto de 2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4 <br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling<br />
* '''Hot-End''' : Buda style v1.2, boquilla: 0,5mm <br />
<br />
|<center>[[File:Mattpaxprn000.jpg|200px]]</center> <br />
|---------<br />
|<center>[[File:Obras.jpg|250px]]</center><br />
|<br />
* '''Clon #248''': <font color="#0000FF">B.E.N</font><br />
* '''Lugar''': Madrid <br />
* '''Modelo''': Prusa iteration 2<br />
* '''Autor''': Rafael <br />
* '''Impresora progenitora''': Mardan e Hija<br />
** '''Nacimiento''': 20/08/2013<br />
** '''Electrónica''': Ramps 1.3<br />
** '''Firmware''': Sprinter <br />
|<center>[[File:B.E.N.jpg|250px]]</center><br />
|---------<br />
|<center>[[File:Winebot2.png|250px]]</center><br />
|<br />
* '''Clon #249''' : <font color="#0000FF"> Winebot</font><br />
* '''Lugar''' : Jumilla (Murcia)<br />
* '''Modelo''' : Prusa IT 3 <br />
* '''Autor''' : Pedro Perez<br />
* '''Impresora progenitora''': Desconocido<br />
* '''Nacimiento''' : 16/08/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : J-Head 0.4mm<br />
|<center>[[File:Scrat-beer.jpg|250px]]</center><br />
|---------<br />
| <center>[[File:MagicMirrorPrusa.jpg|250px]]</center><br />
|<br />
* '''Clon #250''' : <font color="#00334FF"> Magic Mirror Prusa</font><br />
* '''Lugar''' : Vilagarcía de Arousa (Pontevedra)<br />
* '''Modelo''' : Prusa IT 2<br />
* '''Autor''' : JpinedoCW (José Pinedo)<br />
* '''Impresora progenitora''': '''<font color="#FF6633">Piezas compradas a Jesmar</font>'''<br />
* '''Nacimiento''' : 26/08/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Repetier-Host<br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : Buddaschnozzle 2.0 (punta 0.5mm)<br />
* '''Inicio Proyecto''' : 15/07/2013<br />
* '''<font color="#0000FF">Estado:</font>'''<br />
*Imprimiendo su primer clon (una iteración 3 que aún no está registrada en la wiki).<br />
* '''E-mail''': [elmaspinedo@gmail.com]<br />
|<center> [[File:MAGIC-MIRROR-PRUSA.gif|250px]]</center><br />
|------------<br />
| <center>[[File:The_Red_Baron.jpg|250px]]</center> <br />
|<br />
* Clon #251: '''Red Baron'''<br />
* Inicio proyecto: '''10/04/2013'''<br />
* Lugar: '''Madrid'''<br />
* Tipo: '''Prusa i3'''<br />
* Impresora Progenitora: '''Black Knight'''<br />
* '''Nacimiento''' : 01/09/2013<br />
* Autor : '''El equipo Almodóvar''' <br />
| <center>[[File:RedBaron_Avatar.png|200px]]</center> <br />
|------------<br />
| <center>[[File:IMAG0691.jpg|250px]]</center> <br />
|<br />
* Clon #252: '''RedSkin'''<br />
* Inicio proyecto: '''01/01/2013'''<br />
* Lugar: '''Sevilla'''<br />
* Tipo: '''Prusa IT2'''<br />
* Impresora Progenitora: '''Zoltanthor'''<br />
| <center></center> <br />
|---------<br />
|<center>[[File:BobMarlin.jpg|250px]]</center><br />
|<br />
* '''Clon #253: '''BobMarlin'''<br />
* '''Lugar''' : Reus (Tarragona)<br />
* '''Familia''' : Mendel Prusa Iteración 3<br />
* '''Autor''' : Robertmika<br />
* '''Nacimiento''' : 17/09/2013<br />
* '''Impresora progenitora''': Desconocido<br />
* '''Electrónica''': Beduino + Ramps 1.4<br />
* '''Firmware''' : Marlin <br />
* '''Hot-End''' : J-Head<br />
|<center>[[File:Bob_marlin_Logo.JPG|250px]]</center><br />
|---------<br />
|<center>[[File:Kyle_22-08-2013.jpg|250px]]</center><br />
|<br />
* '''Clon #254: '''Kyle'''<br />
* '''Lugar''' : Narón (Galicia)<br />
* '''Familia''' : Mendel Prusa Iteración 2<br />
* '''Autor''' : Alejandro Nieto<br />
* '''Nacimiento''' : 22/08/2013<br />
* '''Impresora progenitora''': Desconocido<br />
* '''Electrónica''': Mega 2540 + Ramps 1.4<br />
* '''Firmware''' : Sprinter 1.3.22 <br />
* '''Hot-End''' : E3D-v5<br />
* [http://reprap.org/wiki/Clone_Wars:Impresora_kyle '''Mas informacion''']<br />
<br />
|<center></center><br />
|---------<br />
|<center>[[File:Boneca.png|250px]]</center><br />
|<br />
* '''Clon #255: '''Boneca'''<br />
* '''Lugar''' : Carballo (Galicia)<br />
* '''Familia''' : Mendel Prusa Iteración 3<br />
* '''Autor''' : Pablo Blanco<br />
* '''Nacimiento''' : 23/09/2013<br />
* '''Impresora progenitora''': Super 8<br />
* '''Electrónica''': Mega 2540 + Ramps 1.4<br />
* '''Firmware''' : Marlyn<br />
* '''Hot-End''' : J-head<br />
|<center></center><br />
|---------<br />
|<center>[[File:Herbie_asimov_256.png|250px]]</center><br />
|<br />
* '''Clon #256''': Herbie<br />
* '''Lugar''' : Zaragoza<br />
* '''Familia''' : Prusa Iteración 3 box<br />
* '''Autor''' : Asimov<br />
* '''Nacimiento''' : 25/09/2013<br />
* '''Impresora progenitora''': Giskard<br />
* '''Electrónica''': Mega 2560 + Ramps 1.4<br />
* '''Firmware''' : Sprinter<br />
* '''Hot-End''' : FaryNozzle<br />
|<center></center><br />
|---------<br />
| <center>[[File:prusamendel_gengiskhan.JPG|150px]]</center> <br />
|<br />
* '''Clon #258''': Genghis Khan<br />
* Lugar: Madrid EUITT UPM<br />
* Tipo: [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* Autor: [http://www.semanasphera.es Asociación de electrónica]<br />
* Nacimiento: '''10/Jun/2013'''<br />
* Impresora progenitora: [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R2-reloaded R2-RELOADED]<br />
* Electrónica: [http://reprap.org/wiki/Generation_7_Electronics Gen7 homemade 20MHz]<br />
* Firmware: [http://reprap.org/wiki/Repetier-Firmware Repetier]<br />
* Extrusor: [http://reprap.org/wiki/Wade%27s_Geared_Extruder Wade's extruder] (plástico de 3mm)<br />
* Hot-End: Budas v1.2<br />
*[http://www.semanasphera.es/?q=es/node/6 MÁS INFORMACIÓN]<br />
|<br />
<center>[[File:Aetel.png|150px]]</center><br />
|---------<br />
| <center>[[File:prusai3_thor.JPG|150px]]</center> <br />
|<br />
* '''Clon #259''': Thor<br />
* Lugar: Valencia<br />
* Tipo: [[Prusa i3/es|Prusa i3]]<br />
* Autor: juvaber<br />
* Nacimiento: '''16/Sep/2013'''<br />
* Impresora progenitora: #165: Goliath<br />
* Electrónica: Mega 2560 + Ramps 1.4<br />
* Firmware: [http://reprap.org/wiki/Repetier-Firmware Repetier]<br />
* Extrusor: Jonaskuehling 3mm<br />
* Hot-End: JHead 3mm-0.5<br />
* [[Clone Wars: Thor|Más información]]<br />
|<br />
<center>[[File:Logo_Thor_Hammer.jpg|150px]]</center><br />
|--------<br />
| <center>[[File:Gladiator.jpg|150px]]</center> <br />
|<br />
* '''Clon #262''': <font color="#0000FF">Gladiator</font><br />
* '''Lugar''': A Coruña<br />
* '''Familia''': Prusa i3<br />
* '''Generación''': 6<br />
* '''Autor''': Daniel López García (dalogax)<br />
* '''Impresora progenitora''': Clon #187: Super 8<br />
* '''Nacimiento''': 16/Sept/2013<br />
* '''Descendencia''': Próximamente!<br />
| | <center>[[File:Gladiatorlogo.JPG|150px]]</center><br />
|<br />
<center>[[File:jpg|150px]]</center><br />
|--------<br />
| <center>[[File:|150px]]</center> <br />
|<br />
* '''Clon #277''': <font color="#0000FF">PrintexD</font><br />
* '''Lugar''': Badajoz<br />
* '''Familia''': Prusa i3<br />
* '''Nacimiento''': 13/Oct./2013<br />
* '''Autor''': Sebastian Gallardo<br />
* '''Impresora progenitora''': Clon #187: Super 8<br />
* '''Electrónica:''' Mega 2560 + Ramps 1.4<br />
* '''Firmware:''' Marlin<br />
* '''Extrusor:''' Jonaskuehling<br />
* '''Hot-End:''' Budas chino<br />
* '''Descendencia''': Próximamente!<br />
|<br />
<center>[[File:|150px]]</center><br />
|--------<br />
| <center>[[File:SilviBot3D.jpg]]</center> <br />
|<br />
* '''Clon #278''': <font color="#0000FF">SilviBot3D</font><br />
* '''Lugar''': Cartaya (Huelva)<br />
* '''Familia''': Prusa i3<br />
* '''Nacimiento''': 15/Oct./2013<br />
* '''Autor''': Rubén Pedraza<br />
* '''Impresora progenitora''': La conjunta<br />
* '''Electrónica:''' Mega 2560 + Ramps 1.4<br />
* '''Firmware:''' Marlin<br />
* '''Extrusor:''' Jonaskuehling<br />
* '''Hot-End:''' JHead 3mm-0.5 (Proximamente un Catnozzle)<br />
* '''Descendencia''': Próximamente!<br />
|<br />
<center>[[File:|150px]]</center><br />
|--------<br />
| <center>Proximamente</center> <br />
|<br />
* '''Clon #280''': <font color="#0000FF">WhitePrawn</font><br />
* '''Lugar''': Lepe (Huelva)<br />
* '''Familia''': Prusa i3<br />
* '''Nacimiento''': 18/Oct./2013<br />
* '''Autor''': Manuel Fernández<br />
* '''Impresora progenitora''': Goliath<br />
* '''Electrónica:''' Mega 2560 + Ramps 1.4<br />
* '''Firmware:''' Marlin<br />
* '''Extrusor:''' Jonaskuehling<br />
* '''Hot-End:''' E3D v.5.1 0.3mm (all metal hotend)<br />
* '''Descendencia''': Próximamente!<br />
|<br />
<center>[[File:|150px]]</center><br />
|--------<br />
| <center>[[File:element_115.jpg|250px]]</center> <br />
|<br />
* Clon #282: '''Element 155'''<br />
* Inicio proyecto: '''25/10/2013'''<br />
* Lugar: '''Santander'''<br />
* Tipo: '''Prusa i3'''<br />
* Impresora Progenitora: '''Rewok'''<br />
* '''Nacimiento''' : 27/10/2013<br />
* Autor : '''LUCAS RepRapZ.com''' <br />
| <center>[[File:element_115.png|250px]]</center><br />
|--------<br />
| <center>[[File:Pluton1.jpg|150px]]</center> <br />
|<br />
* '''Clon #283:''' PLUTON<br />
* '''Lugar:''' Ansoain (Navarra)<br />
* '''Tipo:''' Printrbot V2<br />
* '''Impresora Progenitora:''' Reclone 3d´s Farm<br />
* '''Nacimiento:''' 18/10/2013<br />
* '''Electrónica:''' Mega 2560 + Ramps 1.4<br />
* '''Firmware:''' Sprinter<br />
* '''Hot-End:''' J-Head MK-V Hispania<br />
* '''Autor :''' Eduardo Múgica <br />
| <center>[[File:Pluton2.png|150px]]</center> <br />
|--------<br />
| <center>[[File:Impresora_Torcal.jpg|150px]]</center> <br />
|<br />
* '''Clon #290:''' TORCAL<br />
* '''Lugar:''' Alcalá de Henares (Madrid)<br />
* '''Tipo:''' BCN3D<br />
* '''Impresora Progenitora:''' Rewok<br />
* '''Nacimiento:''' 20/10/2013<br />
* '''Electrónica:''' Mega 2560 + Ramps 1.4<br />
* '''Firmware:''' Marlin<br />
* '''Hot-End:''' E3D<br />
* '''Autor :''' Paco Ríos<br />
| <center>[[File:Obras.jpg|150px]]</center> <br />
|--------<br />
| <center>[[File:The Purpple Angel2.JPG|150px]]</center> <br />
|<br />
* '''Clon #292''': <font color="#0000FF">The Purpple Angel</font><br />
* '''Lugar''': Vera (Almería)<br />
* '''Familia''': Prusa i3<br />
* '''Nacimiento''': 16/Oct./2013<br />
* '''Autor''': Jose Antonio Pérez Caparrós<br />
* '''Impresora progenitora''': [http://reprap.org/wiki/Clone_wars:_Ronqu%C3%ADo/es Ronquío Clon 133]<br />
* '''Electrónica:''' Mega 2560 + Ramps 1.4<br />
* '''Firmware:''' Marlin<br />
* '''Extrusor:''' Jonaskuehling<br />
* '''Hot-End:''' Magma 3mm-0.5<br />
* '''Descendencia''': Próximamente!<br />
|<br />
<center>[[File:Logo TPA.jpg|150px]]</center><br />
|--------<br />
| <center>[[File:mAka.jpg|200px]]</center><br />
|<br />
* '''Clon #295''': '''<font color="#006666">mAka</font>'''<br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': Prusa entre i3 e i2 con variaciones<br />
* '''Nacimiento''': 18/Dic/2013<br />
* '''Autor''': sacamantecas<br />
* '''Impresora progenitora''': no tiene, es hija de los árboles<br />
* '''Electrónica''': Arduino 2560 (genuino) + RAMPS 1.4<br />
* '''Firmware''': Marlin con añadidos<br />
* '''Extrusor''': artesanal<br />
* '''Hot-End''': G3D con el refrigerador modificado<br />
* '''Peculiaridades''': parece una Prusa i3 pero tiene el motor X hacia el interior, el eje X de i2, pero con la correa dentada por debajo<br />
* '''Más información''': Hay disponible una '''[https://sites.google.com/site/cosasdeluiso/maka hoja de ruta]''' con precios, fotos, detalles y vídeos.<br />
| <center>[[File:sacamantecas.png|200px]]</center><br />
<br />
|--------<br />
|<center> [[File:Alextrasza.jpg|250px]]</center><br />
|<br />
* '''Clon #296''': '''<font color="#006666">Alextrasza</font>'''<br />
* '''Lugar''': A Coruña<br />
* '''Familia''': [http://www.reprap.org/wiki/P3Steel P3Steel]<br />
* '''Generación''': 7ª <br />
* '''Inicio proyecto''': 14/Oct/2013<br />
* '''Nacimiento''': 16/Dic/2013<br />
* '''Autor''': [http://www.reprap.org/wiki/User:Jbabio Jbabio]<br />
* '''Impresora progenitora''': #256 herbie<br />
* '''Electrónica''': Arduino 2560 (genuino) + RAMPS 1.4 + SmartLCD<br />
* '''Firmware''': Repetier 0.83<br />
* '''Extrusor''': [http://www.thingiverse.com/thing:26817 Prusa i3 Direct Drive Bowden Extruder] de Indieflow<br />
* '''Hot-End''': J-Head MK V-B de Reprapsource.com<br />
|<center> [[File:Alextrasza.jpg|200px]]</center><br />
|--------<br />
|<center> [[File:Ingenio1.0.jpg|250px]]</center><br />
|<br />
* '''Clon #298''': '''<font color="#006666">Ingenio</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': [http://www.reprap.org/wiki/Clone_wars:_Prusa_iteración_3 | Prusa i3]<br />
* '''Generación''': 5ª <br />
* '''Inicio proyecto''': 5/Oct/2013<br />
* '''Nacimiento''': 27/Dic/2013<br />
* '''Autor''': [http://www.reprap.org/wiki/User:Fid | Fid]<br />
* '''Impresora progenitora''': #187: Super 8.<br />
* '''Electrónica''': Arduino 2560 + RAMPS 1.4<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': <br />
* '''Hot-End''': [http://reprap.org/wiki/Aluhotend | Aluhotend] de [http://reprap.org/wiki/User:Thejollygrimreaper | Thejollygrimreaper]<br />
|<center> [[File:Ingenio1.0.jpg|200px]]</center><br />
|--------<br />
|<center> [[File:SUSII.jpg|250px]]</center><br />
|<br />
* '''Clon #302''': '''<font color="#006666">SUSI I</font>'''<br />
* '''Lugar''': Medellin, Colombia<br />
* '''Familia''': [http://reprap.org/wiki/RepStrap Repstrap]<br />
* '''Generación''': 1 <br />
* '''Inicio proyecto''': 10/Sep/2013<br />
* '''Nacimiento''': 27/Dic/2013<br />
* '''Autor''': [http://www.reprap.org/wiki/User:alejoair | Alejandro Cuartas]<br />
* '''Electrónica''': Arduino 2560 + RAMPS 1.4<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Casero<br />
* '''Hot-End''': AllMetal Hotend Casero<br />
|<center> [[File:SUSII.jpg|200px]]</center><br />
|--------<br />
|<center> [[File:Tatooine.jpg|250px]]</center><br />
|<br />
* '''Clon #305''': '''<font color="#006666">Tatooine</font>'''<br />
* '''Lugar''': Barcelona<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) | Prusa i2]<br />
* '''Generación''': 3ª <br />
* '''Inicio proyecto''': 15/Jul/2012<br />
* '''Nacimiento''': 7/Ene/2014<br />
* '''Autor''': Isaac Muro<br />
* '''Impresora progenitora''': #4: Mardan.<br />
* '''Electrónica''': Arduino 2560 + RAMPS 1.4<br />
* '''Firmware''': Sprinter<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': J-Head MK-V<br />
* '''Más información''': [[Clone wars: Impresora Tatooine|Tattoine]]<br />
|<center> [[File:Tatooine.jpg|200px]]</center><br />
|--------<br />
|<center> [[File:Golem.jpg|250px]]</center><br />
|<br />
* '''Clon #307''': '''<font color="#006666">Golem</font>'''<br />
* '''Lugar''': Cuenca<br />
* '''Familia''': P3Steel<br />
* '''Generación''': 2ª <br />
* '''Inicio proyecto''': 15/DIC./2013<br />
* '''Nacimiento''': 10/Ene/2014<br />
* '''Autor''': Pedro Lahuerta<br />
* '''Impresora progenitora''': #228: Proteus.<br />
* '''Electrónica''': Arduino 2560 + RAMPS 1.4<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': CatNozzle<br />
* '''Más información''': [[Clone wars: Impresora Golem|Golem]]<br />
||<center> [[File:Golem.jpg|200px]]</center><br />
|--------<br />
<br />
<br />
|--------<br />
|<center> [[File:aiculina.jpg|250px]]</center><br />
|<br />
* '''Clon #308''': '''<font color="#006666">Aiculina</font>'''<br />
* '''Lugar''': Granada<br />
* '''Familia''': P3Steel<br />
* '''Generación''': 5 <br />
* '''Inicio proyecto''': 10/OCT./2013<br />
* '''Nacimiento''': 04/Ene/2014<br />
* '''Autor''': Juanma (Exodous)<br />
* '''Impresora progenitora''': #120: Exoudina3D.<br />
* '''Electrónica''': Arduino 2560 + RAMPS 1.4<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': Casero tipo J-Head<br />
||<center> [[File:exodous_fire.jpg|200px]]</center><br />
|--------<br />
<br />
|--------<br />
|<center> []</center><br />
|<br />
* '''Clon #309''': '''<font color="#006666">Éireland</font>'''<br />
* '''Lugar''': Ourense<br />
* '''Familia''': PI3 Metacrilato<br />
* '''Generación''': 4<br />
* '''Inicio proyecto''': 10/Ene./2014<br />
* '''Nacimiento''': 14/Ene/2014<br />
* '''Autor''': Cardiak Brain(Éireland)<br />
* '''Impresora progenitora''': #30: X-Wing.<br />
* '''Electrónica''': Arduino 2560 + RAMPS 1.4<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': J-Head Hispania<br />
||<center> []</center><br />
|--------<br />
<br />
|--------<br />
|<center> [[File:Breaking_TAZ.jpg|250px]]</center><br />
|<br />
* '''Clon #312''': '''<font color="#006666">Breaking TAZ</font>'''<br />
* '''Lugar''': Pontevedra<br />
* '''Familia''': TAZ<br />
* '''Generación''': 6 <br />
* '''Inicio proyecto''': 15/AGO./2013<br />
* '''Nacimiento''': 12/Ene/2014<br />
* '''Autor''': Mario Crespo (MCVet)<br />
* '''Impresora progenitora''': #311: Ctrl-Z.<br />
* '''Electrónica''': Printrboard Rev.D<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': Catnozzle<br />
||<center> [[File:Breaking_TAZ.jpg|200px]]</center><br />
|--------<br />
<br />
|--------<br />
|<center> [[File:libelulalogo.png|150px]]</center><br />
|<br />
* '''Clon #315:'''<font color="#004080">'''Tröllslanda (Libelula)'''</font>.<br />
* '''Lugar''': Suecia<br />
* '''Tipo''': Prusa i2<br />
* '''Autor''': Pedro Rivera <br />
* '''Impresora progenitora:''' ""R3"" <br />
* '''Generación''': 4a <br />
**'''Nacimiento''':12/Mar/2012<br />
**'''Electrónica''': Arduino Mega 2560 + Ramps 1.3<br />
**'''Firmware:''' : Sprinter<br />
**'''Hot-End''': Budaschnozzle 1.2a<br />
<br />
|<br />
<center> [[File:libelulalogo.png|150px]]</center><br />
<br />
<br />
|-------------<br />
| <center>[[File:PATUSA.jpg | 150px ]]</center> <br />
|<br />
* '''Clon #317''': <font color="#0000FF">PATUSA</font><br />
* '''Lugar''': Ciudad Real<br />
* '''Familia''': Prusa Iteración 3 CON LCD<br />
* '''Autor''': PATMURT<br />
* '''Impresora progenitora''': Desconocida<br />
* '''Nacimiento''': 18/Ene/2013<br />
*'''Electrónica''': Arduino Mega 2560 + Ramps 1.4<br />
*'''Firmware:''' : Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
*'''Hot-End''': J-Head<br />
<br />
| | <center>[[File:PATUSA_printing.JPG | 150px]]</center> <br />
|-------------<br />
<br />
<br />
|-------------<br />
| <center>[[File:agrobot_foto.jpg | 180px ]]</center> <br />
|<br />
* '''Clon #318''': <font color="#00FF00">AgroBot</font><br />
* '''Lugar''': Cerceda (A Coruña)<br />
* '''Familia''': Prusa Iteración 3 LCD+SD<br />
* '''Autor''': CgendeCW<br />
* '''Impresora progenitora''': Clon #187: Super 8<br />
* '''Nacimiento''': 29/Ene/2014<br />
*'''Electrónica''': Gen7AVR 1.5<br />
*'''Firmware:''' : Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
*'''Hot-End''': Budas chino Getech<br />
<br />
| | <center>[[File:agrobot_logo.jpg | 300px]]</center> <br />
|-------------<br />
| <center>[[File:Sputnik_final.JPG|300px]]</center><br />
|<br />
* '''Clon #319:''' SPUTNIK<br />
* '''Lugar:''' Zamora.<br />
* '''Tipo:''' Prusa i3 single frame.<br />
* '''Autor:''' Héctor Pérez<br />
* '''Nacimiento:''' 14/11/2013<br />
** '''Electrónica:''' Iduino Mega + RAMPS 1.4<br />
** '''Firmware:''' Marlin<br />
** '''Hotend:''' Buda chino<br />
** '''Otros:''' Ventilador de capa fuera del extrusor<br />
| <center>[[File:sputnik_teck.jpg|200px]]</center><br />
|<br />
|-------------<br />
| <center>[[File:CW_Shai-Hulud.jpg | 180px ]]</center> <br />
|<br />
* '''Clon #320''': <font color="#00FF00">Shai-Hulud</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Tantillus<br />
* '''Autor''': Jose M. Martín<br />
* '''Impresora progenitora''': Clon #185: Gort<br />
* '''Nacimiento''': 03/Feb/2014<br />
*'''Electrónica''': RAMPS 1.4<br />
*'''Firmware:''' : Marlin<br />
* '''Extrusor''': Tantillus<br />
*'''Hot-End''': Hotend J-Head "Hispania"<br />
<br />
| | <center>[[File:CW_Shai_Hulud_logo.jpg | 300px]]</center> <br />
|-------------<br />
<br />
|-------------<br />
| <center>[[File:roseta_foto.jpg | 180px ]]</center><br />
|<br />
* '''Clon #321''': <font color="#00FF00”>Roseta</font><br />
* '''Lugar''': DISCA (UPV) Valencia, Spain<br />
* '''Familia''': Prusa Iteración 3<br />
* '''Autor''': David<br />
* '''Impresora progenitora''': Adoptada<br />
* '''Nacimiento''': 29/Ene/2014<br />
*'''Electrónica''': RAMPS 1.4<br />
*'''Firmware:''' : Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
*'''Hot-End''': Budas gallego<br />
| | <center>[[File:roseta_logo.jpg | 300px]]</center><br />
|-------------<br />
<br />
|-------------<br />
| <center>[[File:Clon-323-LMakerXY.jpg|250px]]</center><br />
|<br />
* '''Clon #323''': <font color="#0000FF">LMakerXY</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': CoreXY<br />
* '''Generación'': 3<br />
* '''Autor''': Luis Macías<br />
* '''Impresora progenitora''': Spica<br />
* '''Nacimiento''': 1-Feb-2014<br />
* '''Electrónica''': Sanguinololu 1.3a (Provisional)<br />
* '''Firmware:''' : Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': Leonozzle<br />
* [[Clone wars Impresora LMakerXY|Mas información]]<br />
| <center>[[File:CoreXY.jpg|300px]]</center> <br />
|-------------<br />
<br />
|-------------<br />
| <center>[[File:pruss.jpg | 180px ]]</center><br />
|<br />
* '''Clon #325''': <font color="#00FF00”>Metaprint</font><br />
* '''Lugar''': Cádiz, Spain<br />
* '''Familia''': Prusa Iteración 3<br />
* '''Autor''': Miguelop24<br />
* '''Impresora progenitora''': Desconocida<br />
* '''Nacimiento''': 09/Feb/2014<br />
*'''Electrónica''': RAMPS 1.4<br />
*'''Firmware:''' : Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
*'''Hot-End''': Polaco-nozzle<br />
| <center>[[File:medalla.jpg | 300px]]</center><br />
|-------------<br />
<br />
|-------------<br />
| <center>[[File:Creabot.jpg | 180px ]]</center><br />
|<br />
* '''Clon #330''': <font color="#00FF00”>CreaBot</font><br />
* '''Lugar''': Madrid, Spain<br />
* '''Familia''': Prusa Iteración 3<br />
* '''Autor''': AngelLM<br />
* '''Impresora progenitora''': Desconocida<br />
* '''Nacimiento''': 02/Feb/2014<br />
*'''Electrónica''': RAMPS 1.4<br />
*'''Firmware:''' : Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
*'''Hot-End''': Budas Chino<br />
| <center>[[File:creabot1.png | 180px]]</center><br />
|---<br />
| <center>[[File:I3_stryper.jpg|250px]]</center> <br />
|<br />
* '''Clon #334:''' <font color="#0000FF">'''I3 Stryper'''</font>.<br />
* '''Lugar''': Pamplona<br />
* '''Familia''': [http://www.reprap.org/wiki/Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame Prusa Iteración 3 Single Frame]<br />
* '''Generación''': 7<br />
* '''Autor''': [[User:lokus77|LoKuS77]]<br />
* '''Impresora progenitora''': Madre:baru (Sin inscribir), Abuela:Jasper_zgz (Sin inscribir), Bisabuelas: #39, #134,#90<br />
* '''Nacimiento:''' 10 de Febrero de 2014<br />
* '''Electrónica''': [http://reprap.org/wiki/RAMPS_1.4/es Ramps 1.4]<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': E3Dv5 3mm<br />
* '''Firmware''': Marlin<br />
* [[Clone_Wars:_Impresora_Stryper |MÁS INFORMACIÓN]]<br />
| <center>[[File:Lokus_stryper.jpg|150px]]</center><br />
|---<br />
| <center>[[File:PopCW.jpg|250px]]</center> <br />
|<br />
* '''Clon #335:''' <font color="#0000FF">'''Pop'''</font>.<br />
* '''Lugar''': A Coruña.<br />
* '''Familia''': FoldaRap 1.1<br />
* '''Generación''': 6<br />
* '''Autor''': [[User:XoanSampaiño|Xoan Sampaiño]]<br />
* '''Impresora progenitora''': Clon #187, Super 8<br />
* '''Nacimiento:''' 7 de marzo de 2014<br />
* '''Electrónica''': [[Sanguinololu]]<br />
* '''Hot-End''': [http://tech3d.org/Machined-Parts Tech3D Machined Parts]<br />
* '''Firmware''': [[Marlin]]<br />
| <center>[[File:PopCW_Logo.jpg|150px]]</center><br />
|---<br />
|}<br />
<br />
ATENCIÓN: Antes de insertar una impresora, [http://maytheclonebewithyou.com/ asegúrate de qué número te toca]<br />
<br />
== Clones en la academia Jedi ==<br />
<br />
En la academia Jedi se encuentran '''todos los clones en construcción'''. Una vez que imprimen su primera pieza alcanzan la categoría de Jedi y salen de la Academia<br />
<br />
{| class="wikitable"<br />
|- <br />
| [[File:Clone-wars-jedi-academy.png|150px|link=Clone wars: Academia Jedi]]<br />
| [[Clone wars: Academia Jedi/es|ACCESO A LA ACADEMIA JEDI]]<br />
|}<br />
<br />
== Clones en Carbonita ==<br />
Clones sin actividad durante bastante tiempo. Posiblemente hayan abandonado el proyecto<br />
<br />
{| class="wikitable"<br />
|- <br />
| [[File:Han-solo-carbonita.jpg|150px|link=Clone wars: Clones en Carbonita]]<br />
| [[Clone wars: Clones en Carbonita| CLONES EN CARBONITA]]<br />
|}<br />
<br />
== Album de fotos y vídeos ==<br />
<br />
{| class="wikitable" style="text-align:center" border="0"<br />
! align="center" colspan="3" | [[Clon_wars:_Album_de_Fotos | Ver Álbum de Fotos completo]]<br />
|- align="center"<br />
| [[File:DSC04024.JPG|200px|link=Clon_wars:_Album_de_Fotos]]<br>'''31/Dic/2011''': Piezas impresas <br> por el Clon R2D2<br />
| [[File:R2D2-cubo-1.jpg|200px|link=Clon_wars:_Album_de_Fotos]]<br>'''24/Dic/2011''': El clon R2D2 ha <br> impreso su primera pieza<br />
| [[File:DSC03885.JPG|200px|link=Clon_wars:_Album_de_Fotos]]<br>'''16/Dic/2011''': Tercera reunión <br> de Clone Wars<br />
|}<br />
<br />
<br />
{| class="wikitable" style="text-align:center" <br />
! align="center" colspan="3" border="0" | [[Clone wars: Album de Videos| Ver Álbum de Vídeos completo]]<br />
|- <br />
|| <videoflash>tDHL7AZm_y8|300|250</videoflash><br />
|| <videoflash>oC_1Tjw196Y|300|250</videoflash><br />
|| <videoflash>_Q3XlmnbWrM|300|250</videoflash><br />
|- <br />
|| '''24/Dic/2011''': Clon R2D2. <br> Primera impresión del Clon R2D2<br />
|| '''20/Dic/2011''': Clon R2D2. <br> Probando el extrusor<br />
|| '''12/Jun/2013''': Clon Gutenberg<br>Adaptación a fresadora<br />
|- <br />
|| <videoflash>zNMdKdazemM|300|250</videoflash><br />
|- <br />
|| '''11/Jun/2013''': Clon Gutenberg<br>Prueba de velocidad como plotter<br />
<br />
|}<br />
<br />
<br />
{| class="wikitable"<br />
|-<br />
|<br />
[[File:Clone-Wars-logo.png|border|100px|link=Proyecto Clone Wars]]<br />
| [[Proyecto Clone Wars]]<br />
|}<br />
<br />
<br />
[[Category:Clone wars/es]]</div>
Lokus77
https://reprap.org/mediawiki/index.php?title=Clone_Wars:_Impresora_Stryper&diff=119679
Clone Wars: Impresora Stryper
2014-03-11T12:11:38Z
<p>Lokus77: </p>
<hr />
<div>== Ficha ==<br />
{| class="wikitable" style="width:100%"<br />
|- <br />
| <center>[[File:I3_stryper.jpg|thumb|Impresora Stryper.]]</center><br />
|<br />
* '''Nombre''': '''<font color="#0000FF">Stryper</font>'''<br />
* '''Rango''': Jedi <br />
* '''Familia''': [[Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame |Prusa Mendel Iteration 3]]<br />
* '''Generación''': 7<br />
* '''Material''': Plástico ABS Amarillo. Metacrilato negro 10mm.<br />
* '''Color''': Negro / Amarillo<br />
* '''Electrónica''': [[RAMPS|RAMPS 1.4]]<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Gregs-Jonaskuehling V4<br />
* '''Hot-End''': E3D-v5 3mm<br />
* '''Nacimiento''': 10/02/2014<br />
* '''Impresora Progenitora''': Madre:baru (Sin inscribir), Abuela: jester (Sin inscribir), Bisabuelas: #39, #134,#90<br />
* '''Hijos''': Sin descendencia (por ahora)<br />
* '''Galería ''': [https://plus.google.com/photos/118042097759435445983/albums/5986890523351025217 FOTOS]<br />
| <center></center><br />
|}<br />
<br />
== Cronología ==<br />
* '''28/08/2013''' - Inicio del proyecto.<br />
* Se va pidiendo el material, va llegando...<br />
* '''31/01/2014''' - Llegan los motores. Era lo último imprescindible para funcionar. Ya se puede terminar el montaje!!<br />
* '''01/02/2014''' - Compramos primer rollo de ABS<br />
* '''02/02/2014''' - Primeras pruebas impresión. '''Cubo calibración calidad pasable'''. Monedas calibración y demás pruebas<br />
* '''10/02/2014''' - Se considera impresora como "viva". :) Mejoras en curso....<br />
<br />
== Compras de material ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Compra'''<br />
| '''Material'''<br />
| '''Comprado en'''<br />
| '''Precio(portes incluídos)'''<br />
| '''Observaciones'''<br />
|-<br />
|''' SEPTIEMBRE'''<br />
|-<br />
| 03/09/2013<br />
| 10 Rodamientos LM8UU <br />
| Imprimiendoen3d.es<br />
| 10€<br />
| 03/09/2013<br />
| 2 Rodamientos 623ZZ10 <br />
| Imprimiendoen3d.es<br />
| 1€<br />
|-<br />
| 03/09/2013<br />
| Kit Tornilleria Prusa I3 single frame (Con muelles M3)<br />
| Imprimiendoen3d.es<br />
| 10€<br />
|-<br />
| 03/09/2013<br />
| KIT VARILLAS ROSCADAS Y LISAS PRUSA I3 SINGLE FRAME<br />
| Imprimiendoen3d.es<br />
| 22€<br />
|-<br />
| 03/09/2013<br />
| Marco Metacrilato 10mm Negro<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 40+7€<br />
|[https://11094530530805020601.googlegroups.com/attach/22e38efead88a7d6/marcoNegro.jpg?view=1&part=5 Foto]<br />
|-<br />
| 03/09/2013<br />
| 2 Poleas T2.5<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 4€<br />
|-<br />
| 03/09/2013<br />
| 2 Termistores cama Epcos 100k<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Kit piezas amarillas by Baru<br />
| Baru<br />
| Donación <br />
| [https://lh4.googleusercontent.com/-8wo9FfWgBGo/Ui5NldSUwtI/AAAAAAABLkQ/LvINckJW4K0/w927-h696-no/2013-09-09 foto]<br />
|-<br />
| 10/09/2013<br />
| Correa GT2.5 2x1m<br />
| Baru<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Espejo Ikea 20x20<br />
| Baru<br />
| Regalo<br />
|-<br />
|'''NOVIEMBRE'''<br />
|-<br />
| 07/11/2013<br />
| Hobbed Bolt M8<br />
| [http://www.ebay.es/usr/jesmar_zgz Jesmar_Zgz (ebay)]<br />
| 5,5€<br />
| [http://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/xi8AAOxyKsZRr0to/$T2eC16R,!ykE9s7t%29d!SBRr0tn3vLw~~60_57.JPG Foto]<br />
|-<br />
| 07/11/2013<br />
| Arduino SainSmart Mega2560 R3 '''Negro'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 13,7€<br />
| [http://www.ebay.es/itm/SainSmart-Mega2560-R3-ATmega2560-16AU-ATMEGA16U2-USB-Cable-For-Arduino-2013-/271187169712 enlace]<br />
|-<br />
| 07/11/2013<br />
| Heatbed SainSmart MK2B '''Negra'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 12,9€<br />
| [http://www.ebay.com/itm/SainSmart-MK2B-Heat-Bed-Heatbed-Hot-Plate-For-RepRap-Mendel-Prusa-3D-Printer-/121171627059 enlace]<br />
|-<br />
| 07/11/2013<br />
| Ramps 1.4<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 11,6€<br />
| [http://www.ebay.es/itm/3D-Printer-Controller-for-RAMPS-1-4-REPRAP-MENDEL-PRUSA-for-Arduino-/310699832639 enlace]<br />
|-<br />
| 07/11/2013<br />
| [http://i.ebayimg.com/00/s/NTk4WDYwMw==/z/GPQAAOxyrxZR2o5V/$%28KGrHqF,!ocFG6JtsySfBR2o5U6vnQ~~60_12.JPG 5 StepStick A4988 3D]<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 14,4€<br />
| [http://www.ebay.es/itm/5PCS-StepStick-Stepper-motor-driver-A4988-3D-Printer-driver-module-Reprap-Prus-/400525154696 enlace]<br />
|-<br />
| 07/11/2013<br />
| [https://lh6.googleusercontent.com/-2wXcZWexoec/UqZlmrQtoaI/AAAAAAAAFz0/786ZDUn-17U/w927-h696-no/DSCN0167.JPG 3 Endstops Mecánico con Led]<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 8€<br />
| [http://www.ebay.es/itm/Mech-Endstop-Switch-Kit-for-CNC-3D-Printer-RepRap-Makerbot-Prusa-Mendel-RAMPS1-4-/200950337317 enlace]<br />
|-<br />
| 07/11/2013<br />
| 10 tiras de 40 pines<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 1,2€<br />
| [http://www.ebay.es/itm/10PCS-40Pin-2-54mm-Single-Row-Straight-Male-Pin-Header-Strip-PBC-Ardunio-/180974247480 enlace]<br />
|-<br />
| 07/11/2013<br />
| 40 cables dupont de 20cm<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 1,6€<br />
| [www.ebay.es/itm/40PCS-Dupont-wire-jumpercables-20cm-2-54MM-male-to-female-1P-1P-For-Arduino-/181011986500 enlace]<br />
|-<br />
| 26/11/2013<br />
| Calibre Digital chino<br />
| [http://www.ebay.com/usr/hkiron-my Hkyron-my (ebay)]<br />
| 7,7€<br />
| [http://www.ebay.com/itm/Electric-6-Stainless-Steel-Digital-Vernier-Dial-Caliper-Gauge-Micro-Meter-GOOD-/290897280812 enlace]<br />
|-<br />
| 28/11/2013<br />
| Pegamento térmico disipadores<br />
| [http://www.ebay.es/usr/qqlinkys2009 qqlinkys2009 (ebay)]<br />
| 1€<br />
| [www.ebay.es/itm/Grasa-de-Silicona-Thermal-Compound-Glue-Heatsink-Plaster-STARS-922-para-CPU-GPU-/291093278661 enlace]<br />
|-<br />
|<br />
|[https://lh4.googleusercontent.com/-YESqsEQPlMI/UqZiY8DWwzI/AAAAAAAAFxI/Q-_juGrK4rc/w927-h696-no/DSCN0138.JPG Pedido Ebay China]<br />
|-<br />
| 29/11/2013<br />
| Hotend E3D V5 3mm Direct Extrusion<br />
| [http://e3d-online.com/E3D-HotEnds/E3D-DirectFeed-HotEnds/E3D-V5-3mm-Direct-All-Metal-HotEnd E3D-Online]<br />
| 68€ (57£)<br />
| [https://lh5.googleusercontent.com/-JOd7ZUCCD6M/UqZkr_2DpwI/AAAAAAAAFyg/18sSCYtIhBM/w927-h696-no/DSCN0154.JPG Foto]<br />
|-<br />
|'''ENERO'''<br />
|-<br />
| 26/01/2014<br />
| [https://lh3.googleusercontent.com/-Tby4Im_MRW4/UwHygr-8-uI/AAAAAAAAGPA/UiGzL8tT9aI/w881-h647-no/motores2.jpg 5 X Motor '''TB42HT47-1684AC''' Nema17 Torque 4.4kg/cm, 1.68A]<br />
| [http://store.thingibox.com/es/motores/27-stepper_nema17.html#/tipo-un_eje_p_n_tb42ht47_1684ac Thingibox]<br />
| 70€ (65+5)<br />
| Cable 70cm. Incluye conectores<br />
|-<br />
|'''FEBRERO'''<br />
|-<br />
| 04/02/2014<br />
| Grasa de Litio (500gr)<br />
| Amazon<br />
| 7,5€<br />
| [http://www.amazon.es/dp/B002E2QM6S Enlace]<br />
|-<br />
| 25/02/2014<br />
| 2 acopladores flexibles 5x5mm<br />
| José Castrillo (Clone wars) albazetech3d@gmail.com<br />
| 6€ (2x 2.5€ + 1€ correos)<br />
| Pendientes recibir... Correos SUX<br />
|}<br />
<br />
'''LISTADO COMPLETO GOOGLE DOCS'''<br />
<br />
[https://docs.google.com/spreadsheet/ccc?key=0Av_gWNbO_3opdDE0UzRCTnY0VTUtUmdrT1BhYk5qNGc#gid=0 Listado Google DOCS con enlaces y precios]<br />
<br />
<br />
'''Materiales no comprados (reciclados, etc)'''<br />
<br />
- 3x Rodamiento 608ZZ Abec 7 (Patines)<br />
<br />
- 1x Fuente alimentacion 500W ATX (12V- 28A)<br />
<br />
- 1x Ventilador 40x40mm<br />
<br />
- 1x Ventilador 60x60mm<br />
<br />
- 1x Ventilador 80x80mm<br />
<br />
<br />
== '''Mejoras Impresas / Diseñadas''' ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Pieza'''<br />
| '''Material'''<br />
| '''Impreso'''<br />
| '''Diseño propio'''<br />
| '''Tinkerkad'''<br />
| '''Thingverse'''<br />
| '''Observaciones'''<br />
|-<br />
|Tapa Skull para engranage grande<br />
[[File:Skull_gear_lokus.jpg|Tapa calavera engranage grande]]<br />
| ABS plateado<br />
| SI<br />
| SI, '''remix''' desde [http://www.thingiverse.com/thing:49220 Skulltruder]<br />
|[https://tinkercad.com/things/8fBhMLMNT1R-tapa-para-gear '''Enlace''']<br />
|[http://www.thingiverse.com/thing:258657 '''Enlace''']<br />
| Necesario limar, impresa con soportes.<br />
|-<br />
|Estabilizador eje Z prusa i3<br />
[[File:Stryper Mejora Marco.jpg|300px|Estabilizador eje Z prusa i3]]<br />
| ABS Amararillo<br />
| SI<br />
| NO<br />
|<br />
|[http://www.thingiverse.com/thing:100128 Enlace]<br />
| Requiere varillas traseras más largas. Agrega infinita estabilidad <br />
|<br />
|-<br />
|Sujección LM8uu a cama<br />
| ABS Amararillo<br />
| SI<br />
| NO<br />
|<br />
|[http://www.thingiverse.com/thing:57770 Enlace]<br />
| Puede requerir editar la separación de los agujeros <br />
|<br />
|-<br />
|Adaptador hotend E3D Fan40mm + brida<br />
[[File:E3D 40mm.jpg|300px|Adaptador hotend E3D Fan40mm + brida]]<br />
| ABS azul<br />
| SI<br />
| SI, remix <br />
|[https://tinkercad.com/things/b9qiHDtoILL-hotend-e3d-v5-apano-ventiladores-40mm-y-sujeccion-brida '''Enlace''']<br />
|[http://www.thingiverse.com/thing:251563 '''Enlace''']<br />
| Puede usarse con un ventilador de 60mm añadiendo un adaptador adicional. <br />
|}</div>
Lokus77
https://reprap.org/mediawiki/index.php?title=File:E3D_40mm.jpg&diff=119678
File:E3D 40mm.jpg
2014-03-11T11:58:00Z
<p>Lokus77: </p>
<hr />
<div></div>
Lokus77
https://reprap.org/mediawiki/index.php?title=File:Stryper_Mejora_Marco.jpg&diff=119677
File:Stryper Mejora Marco.jpg
2014-03-11T11:45:51Z
<p>Lokus77: </p>
<hr />
<div></div>
Lokus77
https://reprap.org/mediawiki/index.php?title=Clone_Wars:_Impresora_Stryper&diff=119676
Clone Wars: Impresora Stryper
2014-03-11T11:23:54Z
<p>Lokus77: </p>
<hr />
<div>== Ficha ==<br />
{| class="wikitable" style="width:100%"<br />
|- <br />
| <center>[[File:I3_stryper.jpg|thumb|Impresora Stryper.]]</center><br />
|<br />
* '''Nombre''': '''<font color="#0000FF">Stryper</font>'''<br />
* '''Rango''': Jedi <br />
* '''Familia''': [[Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame |Prusa Mendel Iteration 3]]<br />
* '''Generación''': 7<br />
* '''Material''': Plástico ABS Amarillo. Metacrilato negro 10mm.<br />
* '''Color''': Negro / Amarillo<br />
* '''Electrónica''': [[RAMPS|RAMPS 1.4]]<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Gregs-Jonaskuehling V4<br />
* '''Hot-End''': E3D-v5 3mm<br />
* '''Nacimiento''': 10/02/2014<br />
* '''Impresora Progenitora''': Madre:baru (Sin inscribir), Abuela: jester (Sin inscribir), Bisabuelas: #39, #134,#90<br />
* '''Hijos''': Sin descendencia (por ahora)<br />
* '''Galería ''': [https://plus.google.com/photos/118042097759435445983/albums/5986890523351025217 FOTOS]<br />
| <center></center><br />
|}<br />
<br />
== Cronología ==<br />
* '''28/08/2013''' - Inicio del proyecto.<br />
* Se va pidiendo el material, va llegando...<br />
* '''31/01/2014''' - Llegan los motores. Era lo último imprescindible para funcionar. Ya se puede terminar el montaje!!<br />
* '''01/02/2014''' - Compramos primer rollo de ABS<br />
* '''02/02/2014''' - Primeras pruebas impresión. '''Cubo calibración calidad pasable'''. Monedas calibración y demás pruebas<br />
* '''10/02/2014''' - Se considera impresora como "viva". :) Mejoras en curso....<br />
<br />
== Compras de material ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Compra'''<br />
| '''Material'''<br />
| '''Comprado en'''<br />
| '''Precio(portes incluídos)'''<br />
| '''Observaciones'''<br />
|-<br />
| 03/09/2013<br />
| 10 Rodamientos LM8UU <br />
| Imprimiendoen3d.es<br />
| 10€<br />
|-<br />
| 03/09/2013<br />
| 2 Rodamientos 623ZZ10 <br />
| Imprimiendoen3d.es<br />
| 1€<br />
|-<br />
| 03/09/2013<br />
| Kit Tornilleria Prusa I3 single frame (Con muelles M3)<br />
| Imprimiendoen3d.es<br />
| 10€<br />
|-<br />
| 03/09/2013<br />
| KIT VARILLAS ROSCADAS Y LISAS PRUSA I3 SINGLE FRAME<br />
| Imprimiendoen3d.es<br />
| 22€<br />
|-<br />
| 03/09/2013<br />
| Marco Metacrilato 10mm Negro<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 40+7€<br />
|[https://11094530530805020601.googlegroups.com/attach/22e38efead88a7d6/marcoNegro.jpg?view=1&part=5 Foto]<br />
|-<br />
| 03/09/2013<br />
| 2 Poleas T2.5<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 4€<br />
|-<br />
| 03/09/2013<br />
| 2 Termistores cama Epcos 100k<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Kit piezas amarillas by Baru<br />
| Baru<br />
| Donación <br />
| [https://lh4.googleusercontent.com/-8wo9FfWgBGo/Ui5NldSUwtI/AAAAAAABLkQ/LvINckJW4K0/w927-h696-no/2013-09-09 foto]<br />
|-<br />
| 10/09/2013<br />
| Correa GT2.5 2x1m<br />
| Baru<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Espejo Ikea 20x20<br />
| Baru<br />
| Regalo<br />
|-<br />
| 07/11/2013<br />
| Hobbed Bolt M8<br />
| [http://www.ebay.es/usr/jesmar_zgz Jesmar_Zgz (ebay)]<br />
| 5,5€<br />
| [http://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/xi8AAOxyKsZRr0to/$T2eC16R,!ykE9s7t%29d!SBRr0tn3vLw~~60_57.JPG Foto]<br />
|-<br />
| 07/11/2013<br />
| Arduino SainSmart Mega2560 R3 '''Negro'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 13,7€<br />
| [http://www.ebay.es/itm/SainSmart-Mega2560-R3-ATmega2560-16AU-ATMEGA16U2-USB-Cable-For-Arduino-2013-/271187169712 enlace]<br />
|-<br />
| 07/11/2013<br />
| Heatbed SainSmart MK2B '''Negra'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 12,9€<br />
| [http://www.ebay.com/itm/SainSmart-MK2B-Heat-Bed-Heatbed-Hot-Plate-For-RepRap-Mendel-Prusa-3D-Printer-/121171627059 enlace]<br />
|-<br />
| 07/11/2013<br />
| Ramps 1.4<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 11,6€<br />
| [http://www.ebay.es/itm/3D-Printer-Controller-for-RAMPS-1-4-REPRAP-MENDEL-PRUSA-for-Arduino-/310699832639 enlace]<br />
|-<br />
| 07/11/2013<br />
| [http://i.ebayimg.com/00/s/NTk4WDYwMw==/z/GPQAAOxyrxZR2o5V/$%28KGrHqF,!ocFG6JtsySfBR2o5U6vnQ~~60_12.JPG 5 StepStick A4988 3D]<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 14,4€<br />
| [http://www.ebay.es/itm/5PCS-StepStick-Stepper-motor-driver-A4988-3D-Printer-driver-module-Reprap-Prus-/400525154696 enlace]<br />
|-<br />
| 07/11/2013<br />
| 3 Endstops Mecánico con Led<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 8€<br />
| [http://www.ebay.es/itm/Mech-Endstop-Switch-Kit-for-CNC-3D-Printer-RepRap-Makerbot-Prusa-Mendel-RAMPS1-4-/200950337317 enlace]<br />
|-<br />
| 07/11/2013<br />
| 10 tiras de 40 pines<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 1,2€<br />
| [http://www.ebay.es/itm/10PCS-40Pin-2-54mm-Single-Row-Straight-Male-Pin-Header-Strip-PBC-Ardunio-/180974247480 enlace]<br />
|-<br />
| 07/11/2013<br />
| 40 cables dupont de 20cm<br />
| [http://www.ebay.com.hk/usr/alice1101983 Alice (ebay)]<br />
| 1,6€<br />
| [www.ebay.es/itm/40PCS-Dupont-wire-jumpercables-20cm-2-54MM-male-to-female-1P-1P-For-Arduino-/181011986500 enlace]<br />
|-<br />
| 26/11/2013<br />
| Calibre Digital chino<br />
| [http://www.ebay.com/usr/hkiron-my Hkyron-my (ebay)]<br />
| 7,7€<br />
| [http://www.ebay.com/itm/Electric-6-Stainless-Steel-Digital-Vernier-Dial-Caliper-Gauge-Micro-Meter-GOOD-/290897280812 enlace]<br />
|-<br />
| 29/11/2013<br />
| Hotend E3D V5 3mm Direct Extrusion<br />
| [http://e3d-online.com/E3D-HotEnds/E3D-DirectFeed-HotEnds/E3D-V5-3mm-Direct-All-Metal-HotEnd E3D-Online]<br />
| 68€ (57£)<br />
| [https://lh5.googleusercontent.com/-JOd7ZUCCD6M/UqZkr_2DpwI/AAAAAAAAFyg/18sSCYtIhBM/w927-h696-no/DSCN0154.JPG Foto]<br />
|-<br />
| 26/01/2014<br />
| [https://lh3.googleusercontent.com/-Tby4Im_MRW4/UwHygr-8-uI/AAAAAAAAGPA/UiGzL8tT9aI/w881-h647-no/motores2.jpg 5 X Motor '''TB42HT47-1684AC''' Nema17 Torque 4.4kg/cm, 1.68A]<br />
| [http://store.thingibox.com/es/motores/27-stepper_nema17.html#/tipo-un_eje_p_n_tb42ht47_1684ac Thingibox]<br />
| 70€ (65+5)<br />
| Cable 70cm. Incluye conectores<br />
|-<br />
| 04/02/2014<br />
| Grasa de Litio (500gr)<br />
| Amazon<br />
| 7,5€<br />
| [http://www.amazon.es/dp/B002E2QM6S Enlace]<br />
|-<br />
| 25/02/2014<br />
| 2 acopladores flexibles 5x5mm<br />
| José Castrillo (Clone wars) albazetech3d@gmail.com<br />
| 6€ (2x 2.5€ + 1€ correos)<br />
| Pendientes recibir... Correos SUX<br />
|}<br />
<br />
'''Materiales no comprados (reciclados, etc)'''<br />
<br />
- 3x Rodamiento 608ZZ Abec 7 (Patines)<br />
<br />
- 1x Fuente alimentacion 500W ATX (12V- 28A)<br />
<br />
- 1x Ventilador 40x40mm<br />
<br />
- 1x Ventilador 60x60mm<br />
<br />
- 1x Ventilador 80x80mm<br />
<br />
<br />
== '''Mejoras Impresas / Diseñadas''' ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Pieza'''<br />
| '''Material'''<br />
| '''Impreso'''<br />
| '''Diseño propio'''<br />
| '''Tinkerkad'''<br />
| '''Thingverse'''<br />
| '''Observaciones'''<br />
|-<br />
|Tapa Skull para engranage grande<br />
[[File:Skull_gear_lokus.jpg|Tapa calavera engranage grande]]<br />
| ABS plateado<br />
| SI<br />
| SI, '''remix''' desde [http://www.thingiverse.com/thing:49220 Skulltruder]<br />
|[https://tinkercad.com/things/8fBhMLMNT1R-tapa-para-gear Enlace]<br />
|[http://www.thingiverse.com/thing:258657 Enlace]<br />
| Necesario limar, impresa con soportes.<br />
|}</div>
Lokus77
https://reprap.org/mediawiki/index.php?title=Clone_Wars:_Impresora_Stryper&diff=119673
Clone Wars: Impresora Stryper
2014-03-11T09:12:25Z
<p>Lokus77: </p>
<hr />
<div>== Ficha ==<br />
{| class="wikitable" style="width:100%"<br />
|- <br />
| <center>[[File:I3_stryper.jpg|thumb|Impresora Stryper.]]</center><br />
|<br />
* '''Nombre''': '''<font color="#0000FF">Stryper</font>'''<br />
* '''Rango''': Jedi <br />
* '''Familia''': [[Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame |Prusa Mendel Iteration 3]]<br />
* '''Generación''': 7<br />
* '''Material''': Plástico ABS Amarillo. Metacrilato negro 10mm.<br />
* '''Color''': Negro / Amarillo<br />
* '''Electrónica''': [[RAMPS|RAMPS 1.4]]<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Gregs-Jonaskuehling V4<br />
* '''Hot-End''': E3D-v5 3mm<br />
* '''Nacimiento''': 10/02/2014<br />
* '''Impresora Progenitora''': Madre:baru (Sin inscribir), Abuela: jester (Sin inscribir), Bisabuelas: #39, #134,#90<br />
* '''Hijos''': Sin descendencia (por ahora)<br />
* '''Galería ''': [https://plus.google.com/photos/118042097759435445983/albums/5986890523351025217 FOTOS]<br />
| <center></center><br />
|}<br />
<br />
== Cronología ==<br />
* '''28/08/2013''' - Inicio del proyecto.<br />
* '''31/01/2014''' - Llegan los motores. Ya se puede terminar el montaje<br />
* '''01/02/2014''' - Compramos primer rollo de ABS!!<br />
* '''02/02/2014''' - Primeras pruebas impresión. '''Cubo calibración calidad pasable'''. Monedas calibración y demás pruebas<br />
* '''10/02/2014''' - Se considera impresora como "viva". :) Mejoras en curso....<br />
<br />
== Compras de material ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Compra'''<br />
| '''Material'''<br />
| '''Comprado en'''<br />
| '''Precio(portes incluídos)'''<br />
| '''Observaciones'''<br />
|-<br />
| 03/09/2013<br />
| 10 Rodamientos LM8UU <br />
| Imprimiendoen3d.es<br />
| 10€<br />
|-<br />
| 03/09/2013<br />
| 2 Rodamientos 623ZZ10 <br />
| Imprimiendoen3d.es<br />
| 1€<br />
|-<br />
| 03/09/2013<br />
| Kit Tornilleria Prusa I3 single frame (Con muelles M3)<br />
| Imprimiendoen3d.es<br />
| 10€<br />
|-<br />
| 03/09/2013<br />
| KIT VARILLAS ROSCADAS Y LISAS PRUSA I3 SINGLE FRAME<br />
| Imprimiendoen3d.es<br />
| 22€<br />
|-<br />
| 03/09/2013<br />
| Marco Metacrilato 10mm Negro<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 40+7€<br />
|[https://11094530530805020601.googlegroups.com/attach/22e38efead88a7d6/marcoNegro.jpg?view=1&part=5 Foto]<br />
|-<br />
| 03/09/2013<br />
| 2 Poleas T2.5<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 4€<br />
|-<br />
| 03/09/2013<br />
| 2 Termistores cama Epcos 100k<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Kit piezas amarillas by Baru<br />
| Baru<br />
| Donación <br />
| [https://lh4.googleusercontent.com/-8wo9FfWgBGo/Ui5NldSUwtI/AAAAAAABLkQ/LvINckJW4K0/w927-h696-no/2013-09-09 foto]<br />
|-<br />
| 10/09/2013<br />
| Correa GT2.5 2x1m<br />
| Baru<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Espejo Ikea 20x20<br />
| Baru<br />
| Regalo<br />
|-<br />
| 07/11/2013<br />
| Hobbed Bolt M8<br />
| Jesmar_Zgz (ebay)<br />
| 5,5€<br />
| [http://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/xi8AAOxyKsZRr0to/$T2eC16R,!ykE9s7t%29d!SBRr0tn3vLw~~60_57.JPG Foto]<br />
|-<br />
| 07/11/2013<br />
| Arduino SainSmart Mega2560 R3 '''Negro'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 13,7€<br />
| [http://www.ebay.es/itm/SainSmart-Mega2560-R3-ATmega2560-16AU-ATMEGA16U2-USB-Cable-For-Arduino-2013-/271187169712 enlace]<br />
|-<br />
| 07/11/2013<br />
| Heatbed SainSmart MK2B '''Negra'''<br />
| [http://www.ebay.com.hk/usr/trade_spotting Trade_Spotting (ebay)]<br />
| 12,9€<br />
| [www.ebay.com/itm/SainSmart-MK2B-Heat-Bed-Heatbed-Hot-Plate-For-RepRap-Mendel-Prusa-3D-Printer-/121171627059 enlace]<br />
|-<br />
| 26/11/2013<br />
| Calibre Digital chino<br />
| [http://www.ebay.com/usr/hkiron-my Hkyron-my (ebay)]<br />
| 7,7€<br />
| [http://www.ebay.com/itm/Electric-6-Stainless-Steel-Digital-Vernier-Dial-Caliper-Gauge-Micro-Meter-GOOD-/290897280812 enlace]<br />
|-<br />
| 29/11/2013<br />
| Hotend E3D V5 3mm Direct Extrusion<br />
| [http://e3d-online.com/E3D-HotEnds/E3D-DirectFeed-HotEnds/E3D-V5-3mm-Direct-All-Metal-HotEnd E3D-Online]<br />
| 68€ (57£)<br />
| [https://lh5.googleusercontent.com/-JOd7ZUCCD6M/UqZkr_2DpwI/AAAAAAAAFyg/18sSCYtIhBM/w927-h696-no/DSCN0154.JPG Foto]<br />
|-<br />
| 26/01/2014<br />
| [https://lh3.googleusercontent.com/-Tby4Im_MRW4/UwHygr-8-uI/AAAAAAAAGPA/UiGzL8tT9aI/w881-h647-no/motores2.jpg 5 X Motor '''TB42HT47-1684AC''' Nema17 Torque 4.4kg/cm, 1.68A]<br />
| [http://store.thingibox.com/es/motores/27-stepper_nema17.html#/tipo-un_eje_p_n_tb42ht47_1684ac Thingibox]<br />
| 70€ (65+5)<br />
| Cable 70cm. Incluye conectores<br />
|-<br />
| 04/02/2014<br />
| Grasa de Litio (500gr)<br />
| Amazon<br />
| 7,5€<br />
| [http://www.amazon.es/dp/B002E2QM6S Enlace]<br />
|-<br />
| 25/02/2014<br />
| 2 acopladores flexibles 5x5mm<br />
| José Castrillo (Clone wars) albazetech3d@gmail.com<br />
| 6€ (2x 2.5€ + 1€ correos)<br />
| Pendientes recibir... Correos SUX<br />
|}<br />
<br />
'''Materiales no comprados (reciclados, etc)'''<br />
<br />
- 3x Rodamiento 608ZZ Abec 7 (Patines)<br />
<br />
- 1x Fuente alimentacion 500W ATX (12V- 28A)<br />
<br />
- 1x Ventilador 40x40mm<br />
<br />
- 1x Ventilador 60x60mm<br />
<br />
- 1x Ventilador 80x80mm<br />
<br />
<br />
== Mejoras Impresas / Diseñadas ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Pieza'''<br />
| '''Material'''<br />
| '''Impreso'''<br />
| '''Diseño propio'''<br />
| '''Tinkerkad'''<br />
| '''Thingverse'''<br />
| '''Observaciones'''<br />
|-<br />
|Tapa Skull para engranage grande<br />
[[File:Skull_gear_lokus.jpg|Tapa calavera engranage grande]]<br />
| ABS plateado<br />
| SI<br />
| SI, '''remix''' desde [http://www.thingiverse.com/thing:49220 Skulltruder]<br />
|[https://tinkercad.com/things/8fBhMLMNT1R-tapa-para-gear Enlace]<br />
|[http://www.thingiverse.com/thing:258657 Enlace]<br />
| Necesario limar, impresa con soportes.<br />
|}</div>
Lokus77
https://reprap.org/mediawiki/index.php?title=File:Skull_gear_lokus.jpg&diff=119672
File:Skull gear lokus.jpg
2014-03-11T08:59:34Z
<p>Lokus77: </p>
<hr />
<div></div>
Lokus77
https://reprap.org/mediawiki/index.php?title=Clone_Wars:_Impresora_Stryper&diff=119671
Clone Wars: Impresora Stryper
2014-03-11T08:02:27Z
<p>Lokus77: </p>
<hr />
<div>== Ficha ==<br />
{| class="wikitable" style="width:100%"<br />
|- <br />
| <center>[[File:I3_stryper.jpg|thumb|Impresora Stryper.]]</center><br />
|<br />
* '''Nombre''': '''<font color="#0000FF">Stryper</font>'''<br />
* '''Rango''': Jedi <br />
* '''Familia''': [[Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame |Prusa Mendel Iteration 3]]<br />
* '''Generación''': 7<br />
* '''Material''': Plástico ABS Amarillo. Metacrilato negro 10mm.<br />
* '''Color''': Negro / Amarillo<br />
* '''Electrónica''': [[RAMPS|RAMPS 1.4]]<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Gregs-Jonaskuehling V4<br />
* '''Hot-End''': E3D-v5 3mm<br />
* '''Nacimiento''': 10/02/2014<br />
* '''Impresora Progenitora''': Madre:baru (Sin inscribir), Abuela: jester (Sin inscribir), Bisabuelas: #39, #134,#90<br />
* '''Hijos''': Sin descendencia (por ahora)<br />
* '''Galería ''': [https://plus.google.com/photos/118042097759435445983/albums/5986890523351025217 FOTOS]<br />
| <center></center><br />
|}<br />
<br />
== Cronología ==<br />
* '''28/08/2013''' - Inicio del proyecto.<br />
* '''10/02/2014''' - En curso.<br />
<br />
== Compras de material ==<br />
<br />
[http://url /Compras Reporte de compras completo]<br />
<br />
Última actualización:<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Compra'''<br />
| '''Material'''<br />
| '''Comprado en'''<br />
| '''Precio'''<br />
| '''Observaciones'''<br />
|-<br />
| 03/09/2013<br />
| 10 Rodamientos LM8UU <br />
| Imprimiendoen3d.es<br />
| 10€<br />
|-<br />
| 03/09/2013<br />
| 2 Rodamientos 623ZZ10 <br />
| Imprimiendoen3d.es<br />
| 1€<br />
|-<br />
| 03/09/2013<br />
| Kit Tornilleria Prusa I3 single frame (Con muelles M3)<br />
| Imprimiendoen3d.es<br />
| 10€<br />
|-<br />
| 03/09/2013<br />
| KIT VARILLAS ROSCADAS Y LISAS PRUSA I3 SINGLE FRAME<br />
| Imprimiendoen3d.es<br />
| 22€<br />
|-<br />
| 03/09/2013<br />
| Marco Metacrilato 10mm Negro<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 40+7€<br />
|[https://11094530530805020601.googlegroups.com/attach/22e38efead88a7d6/marcoNegro.jpg?view=1&part=5 Foto]<br />
|-<br />
| 03/09/2013<br />
| 2 Poleas T2.5<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 4€<br />
|-<br />
| 03/09/2013<br />
| 2 Termistores cama Epcos 100k<br />
| Javier Hernansanz (Clone Wars) javitwo@gmail.com<br />
| 0€<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Kit piezas amarillas by Baru<br />
| Baru<br />
| Donación <br />
| [https://lh4.googleusercontent.com/-8wo9FfWgBGo/Ui5NldSUwtI/AAAAAAABLkQ/LvINckJW4K0/w927-h696-no/2013-09-09 foto]<br />
|-<br />
| 10/09/2013<br />
| Correa GT2.5 2x1m<br />
| Baru<br />
| Regalo<br />
|-<br />
| 10/09/2013<br />
| Espejo Ikea 20x20<br />
| Baru<br />
| Regalo<br />
|-<br />
| 07/11/2013<br />
| Hobbed Bolt M8<br />
| Jesmar_Zgz (ebay)<br />
| 5,5€<br />
| [http://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/xi8AAOxyKsZRr0to/$T2eC16R,!ykE9s7t%29d!SBRr0tn3vLw~~60_57.JPG Foto]<br />
|}<br />
<br />
<br />
<br />
== Proceso de construcción ==<br />
<br />
[http://www.reprap.org/wiki/Clone_wars:]<br />
<br />
Última actualización:<br />
{| class="wikitable" style="width:100%"<br />
| '''Fecha'''<br />
| '''Componente'''<br />
| '''Foto'''<br />
| '''Descripcion'''<br />
|-<br />
| 3/09/2013<br />
|prueba1<br />
| <center>foto</center><br />
|prueba3.<br />
|}<br />
<br />
== Almacen de piezas fabricadas ==<br />
<br />
[http://www.reprap.org/wiki/Clone_wars:]<br />
<br />
Última actualización:<br />
{| class="wikitable" style="width:100%"<br />
| '''Fecha'''<br />
| '''Pieza'''<br />
| '''Fotos'''<br />
| '''Descripcion'''<br />
|-<br />
|}</div>
Lokus77
https://reprap.org/mediawiki/index.php?title=Clone_Wars:_Impresora_Stryper&diff=119609
Clone Wars: Impresora Stryper
2014-03-10T14:13:43Z
<p>Lokus77: </p>
<hr />
<div>== Ficha ==<br />
{| class="wikitable" style="width:100%"<br />
|- <br />
| <center>[[File:I3_stryper.jpg|thumb|Impresora Stryper.]]</center><br />
|<br />
* '''Nombre''': '''<font color="#0000FF">Stryper</font>'''<br />
* '''Rango''': Jedi <br />
* '''Familia''': [[Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame |Prusa Mendel Iteration 3]]<br />
* '''Generación''': 7<br />
* '''Material''': Plástico ABS Amarillo. Metacrilato negro 10mm.<br />
* '''Color''': Negro / Amarillo<br />
* '''Electrónica''': [[RAMPS|RAMPS 1.4]]<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Gregs-Jonaskuehling V4<br />
* '''Hot-End''': E3D-v5 3mm<br />
* '''Nacimiento''': 10/02/2014<br />
* '''Impresora Progenitora''': Madre:baru (Sin inscribir), Abuela: jester (Sin inscribir), Bisabuelas: #39, #134,#90<br />
* '''Hijos''': Sin descendencia (por ahora)<br />
* '''Galería ''': [https://plus.google.com/photos/118042097759435445983/albums/5986890523351025217 FOTOS]<br />
| <center></center><br />
|}<br />
<br />
== Cronología ==<br />
* '''10/02/2014''' - En curso.<br />
<br />
== Compras de material ==<br />
<br />
[http://url /Compras Reporte de compras completo]<br />
<br />
Última actualización:<br />
<br />
{| class="wikitable" style="width:100%"<br />
| '''Compra'''<br />
| '''Recepción'''<br />
| '''Material'''<br />
| '''Foto'''<br />
| '''Comprado en'''<br />
| '''Observaciones'''<br />
|-<br />
| 30/12/2013<br />
| 02/01/2014<br />
| Kit 5 Disipadores driver A4988 Pololu<br />
| <center>foto</center><br />
<br />
| <br />
|}<br />
<br />
== Proceso de construcción ==<br />
<br />
[http://www.reprap.org/wiki/Clone_wars:]<br />
<br />
Última actualización:<br />
{| class="wikitable" style="width:100%"<br />
| '''Fecha'''<br />
| '''Componente'''<br />
| '''Foto'''<br />
| '''Descripcion'''<br />
|-<br />
| 12/01/2014<br />
|prueba1<br />
| <center>foto</center><br />
|prueba3.<br />
|}<br />
<br />
== Almacen de piezas fabricadas ==<br />
<br />
[http://www.reprap.org/wiki/Clone_wars:]<br />
<br />
Última actualización:<br />
{| class="wikitable" style="width:100%"<br />
| '''Fecha'''<br />
| '''Pieza'''<br />
| '''Fotos'''<br />
| '''Descripcion'''<br />
|-<br />
|}</div>
Lokus77
https://reprap.org/mediawiki/index.php?title=Clone_Wars:_El_imperio_de_los_clones/es&diff=119584
Clone Wars: El imperio de los clones/es
2014-03-10T10:26:19Z
<p>Lokus77: /* Jedis */</p>
<hr />
<div>{{Languages|Clone_Wars:_El_imperio_de_los_clones}}<br />
== El Imperio Clone wars ==<br />
<br />
=== Árbol genealógico ===<br />
Todo clon tiene un origen...<br />
<p id="mainPage.title" style="background:#eeeeee; color:#cf7606; padding: 0.4em; font-weight: bold; font-size: 120%;">Cantidad de Repstraps hasta el momento: 19 </p><br />
<p id="mainPage.title" style="background:#eeeeee; color:#cf7606; padding: 0.4em; font-weight: bold; font-size: 120%;">Cantidad de clones producidos hasta el momento: 264 </p><br />
<p id="mainPage.title" style="background:#eeeeee; color:#cf3606; padding: 0.4em; font-weight: bold; font-size: 120%;">Cantidad total de Impresoras 3D: 283 </p><br />
{| class="wikitable"<br />
|- <br />
| <center>[[File:2012-12-20-clone-wars-genealogy-100-clones.png|250px|Todo clon tiene un origen... (click para agrandar)]]</center><br />
| <center>[[File:cw_tree_2.png|250px]]</center><br />
|-----<br />
|<br />
* El fichero vectorial (SVG) está en [https://github.com/Obijuan/Clone-wars/tree/master/genealogy el repositorio] <br />
* [https://raw.github.com/Obijuan/Clone-wars/master/genealogy/png/2012-12-20-clone-wars-genealogy-100-clones.png PNG en alta resolución]<br />
| <center>Puedes agregar tu clon y ver los que están ya agregados en<br><br />
[http://maytheclonebewithyou.com/ May The Clone Be With You]</center><br />
|}<br />
<br />
=== Cronología ===<br />
<br />
{| class="wikitable"<br />
|- <br />
| [[File:clonwars_timeline.png|200px|Acceso a la cronología|link=http://www.b-o-t.cc]]<br />
|<br />
* El proyecto CloneWars tiene ya un tamaño importante. Hemos creado [http://www.b-o-t.cc esta cronología] para mostrar de otra forma todos los acontecimientos que han ido recogiéndose y que sin duda se producirán en adelante.<br />
|}<br />
<br />
== Mapa del Imperio de los Clones ==<br />
<br />
{| class="wikitable"<br />
|- <br />
| [[File:Clon-wars-map.png|200px|Acceso directo al mapa|link=http://maps.google.com/maps/ms?msid=212249552587451398586.0004b8d56644866cdfb9c&msa=0&ll=40.413496,-3.713379&spn=13.022942,28.520508]]<br />
|<br />
* ¿Quieres conocer '''cuántos clones hay cerca de donde vives''' o ver '''la extensión del imperio de clones'''? Consulta el [[Mapa Imperio Clones| mapa del Imperio de los Clones]].<br />
* ¿Quieres que todos sepan '''dónde se encuentra el clon que has construido o que estás construyendo'''? En el [[Mapa Imperio Clones| mapa del Imperio de los Clones]] puedes añadir la localización y estado de tu clon.<br />
|}<br />
<br />
== Generación 0: Las impresoras progenitoras ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
|- <br />
| [[File:Madre-gen0-r1.jpg|150px|link=Makerbot Thing-o-matic: MADRE]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">MADRE</font>'''<br />
* '''Localización''': Universidad Carlos III de Madrid<br />
* '''Modelo''': [http://store.makerbot.com/makerbot-thing-o-matic.html Thing-o-Matic] de la empresa Makerbot<br />
* '''Nacimiento''': 16/Mayo/2011<br />
* '''Propiedad de''': [http://asrob.uc3m.es/index.php/Main_Page Asociación de Robótica de la UC3M]<br />
* '''Hijos''': [[Clone wars:Impresora Death Star|Death Star]], [[Clone wars:Impresora Maese Artorius|Maese Artorius]], [[Clone wars:Impresora Mardan|Mardan]], [[Clone wars:Impresora Sonny|Sonny]], [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]], [[Clone_wars:Impresora_Wendy|Wendy]]<br />
* '''[http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:MADRE MAS INFORMACIÓN]'''<br />
|<br />
<center> [[File:Mother 98098.png|200px]] </center><br />
|--------<br />
| [[File:PADRE-1.jpg|160px|link=Makerbot Thing-o-matic: PADRE]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">PADRE</font>''' (a.k.a UC3-PO)<br />
* '''Localización''': Universidad Carlos III de Madrid<br />
* '''Modelo''': [http://store.makerbot.com/makerbot-thing-o-matic.html Thing-o-Matic] de la empresa Makerbot<br />
* '''Nacimiento''': 8/Oct/2011 (Impresión de la primera pieza)<br />
* '''Propiedad de''': [http://www.uc3m.es/portal/page/portal/dpto_ing_sistemas_automatica Departamento de Ingeniería de Sistemas y Automática]<br />
* '''Hijos''': [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]], [[Clone_wars:Impresora_Wendy|Wendy]], [[Clone wars: Impresora Dédadlo|Dédalo]]<br />
* '''[http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:PADRE MAS INFORMACIÓN]'''<br />
|<br />
<center> [[File:Darth-vader-star-wars-doormat.jpg|170px]] </center><br />
<center>"Yo soy tu padre..."</center><br />
|----------------<br />
| [[File:R1-50.jpg|160px|link=http://www.iearobotics.com/wiki/index.php?title=Makerbot_Cupcake:_R1]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">R1</font>''' (<font color="#00FF00">R.I.P</font>)<br />
* '''Localización''': Madrid<br />
* '''Modelo''': [http://wiki.makerbot.com/cupcake Cupcake], de Makerbot Industries (Número 8 del mundo)<br />
* '''Nacimiento''': 19/Mayo/2009<br />
* '''Propiedad de''': <br />
** [http://www.iearobotics.com/wiki/index.php?title=Juan_Gonzalez:Main Juan González-Gómez] (Obijuan)<br />
** [http://www.iearobotics.com/wiki/index.php?title=Andr%C3%A9s_Prieto-Moreno Andrés Prieto-Moreno]<br />
* '''Hijos''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel:_R2D2 R2D2]<br />
<br />
* '''[http://www.iearobotics.com/wiki/index.php?title=Makerbot_Cupcake:_R1 MAS INFORMACIÓN]'''<br />
|<br />
<center> [[File:R1-series.jpg |90px]] </center> <br><br />
<center>[http://starwars.wikia.com/wiki/R1-series_astromech_droid Serie R1]</center><br />
|----------------<br />
| [[File:MAF1.jpeg|160px]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">MAF-1</font>''' <br />
* '''Localización''': Madrid y "El Bierzo"<br />
* '''Modelo''': [http://www.makergear.com/blogs/frontpage/3323752-the-makergear-mosaic-3d-printer Mosaic], de Makergear<br />
* '''Nacimiento''': 22/Abril/2012 <br />
* '''Propiedad de''': <br />
**[http://madebyfrutos.es/ Miguel Angel de Frutos] <br />
* '''Hijos''': [[Clone wars: Impresora Rewok|Rewok]]<br />
* '''[[MakerGear Mosaic 1: MAF-1|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:StormtrooperMoonwalkWallpaper.jpg |250px]] </center> <br><br />
|----------------<br />
| [[File:Clon0-Demiurgo-6489.jpg|160px]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">Demiurgo</font>''' <br />
* '''Localización''': Madrid<br />
* '''Modelo''': [http://store.makerbot.com/makerbot-thing-o-matic.html Thing-o-Matic] de la empresa Makerbot<br />
* '''Nacimiento''': 15/Enero/2012<br />
* '''Propiedad de''': Jon Goitia<br />
* '''Hijos''': [[Impresora: la cosa|La Cosa]], [[Impresora:_unicorn|Unicorn]]<br />
* '''[[Impresora Progenitora: Demiurgo|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Lion-faced deity.jpg|200px]] </center> <br><br />
|----------------<br />
| [[File:IMG_0472.jpg|200px]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">3DGDAF</font>''' <br />
* '''Modelo''': [http://store.makerbot.com/replicator-404.html Replicator], de la empresa Makerbot<br />
* '''Nacimiento''': 22/06/2012 - Impresión de la primera pieza el 26/06/2012<br />
* '''Propiedad de''': [http://www.uc3m.es/portal/page/portal/grupos_investigacion/grupo_displays_aplicaciones_fotonicas Grupo de Displays y Aplicaciones Fotónicas de la UC3M]<br />
* '''Localización''': UC3M, Madrid<br />
* '''MAS INFORMACIÓN'''<br />
|<br />
<center> [[File:Logo 3D-GDAF.jpg|170px]] </center><br />
|----------------<br />
| [[File:Robcib-maker.jpg|200px|link=http://www.iearobotics.com/wiki/index.php?title=MakerBot_Thing-o-Matic:_Robcib-Maker]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">UPM-MAKER</font>''' <br />
* '''Modelo''': [http://store.makerbot.com/makerbot-thing-o-matic.html Thing-o-Matic] de la empresa Makerbot<br />
* '''Nacimiento''': 11/2011 <br />
* '''Propiedad de''': [http://www.robcib.etsii.upm.es/ RobCib]. Grupo de Robótica y Cibernética, UPM.<br />
* '''Localización''': ETSII-UPM, Madrid<br />
* '''[http://www.iearobotics.com/wiki/index.php?title=MakerBot_Thing-o-Matic:_Robcib-Maker MAS INFORMACIÓN]'''<br />
|<br />
<center> [[File:robcib.jpg|170px]] </center><br />
|----------------<br />
| [[File:Clon0-CADesigns.png|200px|link=]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">CADesigns</font>''' <br />
* '''Modelo''': Derivación Thing-o-Matic (conversión medidas a sistema métrico)<br />
* '''Nacimiento''': Marzo 2011<br />
* '''Propiedad de''': Carlos Monreal<br />
* '''Localización''': Zaragoza<br />
* '''MAS INFORMACIÓN'''<br />
|<br />
<center> [[File:Cadesign-logo.png|170px]] </center><br />
|--------<br />
| [[File:Cupcake-madalena.jpg|200px]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">Madalena</font>'''<br />
* '''Modelo''': [http://wiki.makerbot.com/cupcake Cupcake], de Makerbot Industries (nº 2542)<br />
* '''Nacimiento''': 12/Mar/2011 (Impresión de la primera pieza)<br />
* '''Propiedad de''': [http://canarnova.blogspot.com/ Canarnova - Grupo de creación e innovación tecnológica de Canarias]<br />
* '''Localización''': Tenerife, Canarias<br />
* '''MÁS INFORMACIÓN'''<br />
|<br />
<center> [[File:Cupcake_mint.jpg|170px]] </center><br />
|------------- <br />
| <center>[[File:Clone0-Xan.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Xan</font>'''<br />
*'''Lugar''': Cancún (México)<br />
*'''Familia''': [http://reprap.org/wiki/Printrbot#Laser-cut_Printrbots Printrbot Plus]<br />
*'''Autor''': Alejandro Martín<br />
* '''Nacimiento''': 23/Sep/2012<br />
* '''MÁS INFORMACIÓN'''<br />
| <center>[[File:Xan-logo.png|150px]]</center> <br />
|------------- <br />
| <center>[[File:Clon0-Plumabot-M.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Plumabot-M</font>'''<br />
*'''Localización''': Madrid<br />
*'''Modelo''': Replicator I<br />
*'''Lugar''': IES Juan de la Cierva, Madrid<br />
* '''Nacimiento''': 4/Junio/2012<br />
*'''Propiedad de''': IES Juan de la Cierva<br />
* '''MÁS INFORMACIÓN'''<br />
| <center>[[File:PLUMABOT-M.bmp]]</center> <br />
|------------- <br />
| <center>[[File:Clone0-pris.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Pris</font>'''<br />
*'''Lugar''': Madrid<br />
*'''Autor''': Jose Hevia<br />
*'''Familia''': Printrbot+ LC<br />
*'''Nacimiento''': 20/Julio/2012<br />
*'''MÁS INFORMACIÓN'''<br />
| <center>[[File:Pris2.jpg|200px]]</center> <br />
|------------- <br />
| <center>[[File:Clon0-Micro tr.png|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Micro</font>'''<br />
*'''Lugar''': Madrid<br />
*'''Autor''': [http://carlosgs.es/ Carlos García Saura]<br />
*'''Familia''': [http://printrbot.com/shop/printrbot-jr/ Printrbot jr.]<br />
*'''Nacimiento''': 23/Octubre/2012<br />
*'''MÁS INFORMACIÓN'''<br />
| <center>[[File:Micro-logo.png|200px]]</center> <br />
|------------- <br />
| <center>[[File:Clon0-HORI.png|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">HORI</font>'''<br />
*'''Lugar''': Madrid<br />
*'''Propietario''': [http://www-bsac.eecs.berkeley.edu/~mccoy/ Chris D. McCoy] <br />
*'''Operador actual ''': [http://madebyfrutos.wordpress.com/ Miguel Ángel de Frutos], en [http://aerobotclubderobticadeaeronuticos.blogspot.com.es/ Aerobot Club de Robótica] <br />
*'''Familia''': [http://store.makerbot.com/replicator.html/ Replicator I], de Makerbot<br />
*'''Nacimiento''': 10/Julio/2012<br />
*'''[[HORI |MAS INFORMACIÓN]]'''<br />
| <center>[[File:Clon0-HORI.png|150px]]</center> <br />
|------------- <br />
| <center>[[File:Clon0-UltiCo.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">UltiCO</font>'''<br />
*'''Lugar''': Carrasquedo (Burgos)<br />
*'''Propietario''': Ivan Blasco<br />
*'''Familia''': Ultimaker<br />
*'''Nacimiento''': 15/Jul/2012<br />
*'''[[UltiCo |MAS INFORMACIÓN]]'''<br />
| <center>[[File:UltiCO-logo.png|150px]]</center> <br />
|------------- <br />
| <center>[[File:DeutecnoMAKER-1.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Deutecno-maker</font>'''<br />
*'''Lugar''': Ávila<br />
*'''Propietario''': [http://www.deutecno.com/index2.html Deutecno, S.L]<br />
*'''Familia''': Thing-o-matic <br />
*'''Nacimiento''': 15/Dic/2011<br />
*'''[http://www.iearobotics.com/wiki/index.php?title=MakerBot_Thing-o-Matic:_Deutecno-Maker MAS INFORMACIÓN]'''<br />
| <center>[[File:DEUTECNO-label.jpg|150px]]</center> <br />
|------------- <br />
| <center>[[File:Clon 0 Magic carpet.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Magic Carpet</font>'''<br />
*'''Lugar''': Orio (Guipúzcoa)<br />
*'''Autor''': Antonio Campos<br />
*'''Familia''': [http://printrbot.com/shop/printrbot-jr/ Printrbot jr.]<br />
*'''Nacimiento''': 30/Octubre/2012<br />
*'''MÁS INFORMACIÓN'''<br />
| <center>[[File:Clon0 magic carpet logo.png|200px]]</center> <br />
|------------- <br />
| <center>[[File:Clon0-Plumabot-Gr.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Plumabot-Gr</font>'''<br />
*'''Localización''': Granada<br />
*'''Modelo''': Replicator I<br />
*'''Lugar''': IES Virgen de las Nieves, Granada<br />
*'''Nacimiento''': 28/Septiembre/2012<br />
*'''Propiedad de:''': IES Virgen de las Nieves<br />
*'''MÁS INFORMACIÓN'''<br />
| <center>[[File:PLUMABOT-Gr.jpg|200px]]</center> <br />
|------------- <br />
| <center>[[File:Art_e_Facto.jpg|200px]]</center> <br />
|<br />
*'''Nombre:''' '''<font color="#0000FF">Art-e-Facto</font>'''<br />
*'''Localización:''' Madrid<br />
*'''Modelo:''' RepStrap CNC<br />
*'''Lugar:''' Vallecas<br />
*'''Nacimiento:''' 19/Marzo/2013<br />
*'''Propiedad de:''' Miguel Herranz<br />
*'''MÁS INFORMACIÓN'''<br />
| <center>[[File:X-Wing.jpg|200px]]</center><br />
<center>X-Wing</center> <br />
|------------- <br />
|}<br />
<br />
== Los Clones ==<br />
<br />
=== Máster de la orden Jedi ===<br />
* '''Descripción''': Clones que hayan parido '''TRES o más clones''' totalmente operativos (Jedi)<br />
<br />
{| class="wikitable" style="width:100%"<br />
<br />
{{Template:CloneWars_clon|29|Gandalf the transparent | [[Prusa_Air_2|Prusa Air 2]] | 1 | 20/Jun/2012 | [http://iearobotics.com/alberto/doku.php Alberto Valero] | [http://www.iearobotics.com/wiki/index.php?title&#61;Impresora_3D:PADRE PADRE] y [http://www.iearobotics.com/wiki/index.php?title&#61;Impresora_3D:MADRE MADRE] | Universidad Carlos III de Madrid | [[Clone wars: Impresora Gandalf the transparent | '''Mas información''']] | File:Clon-29-Gandalf-the-transparent.png | File:Logo-gandalf-transparent2.png }}<br />
<br />
<br />
{{Template:CloneWars_clon|1|R2D2 (R.I.P)|[[Prusa Mendel (iteration 1)|Prusa Mendel]] original|1|24/Dic/2011|[http://www.iearobotics.com/wiki/index.php?title&#61;Juan_Gonzalez:Main Juan González-Gómez] (Obijuan) y [http://www.iearobotics.com/wiki/index.php?title&#61;Andr%C3%A9s_Prieto-Moreno Andrés Prieto-Moreno]|[http://www.iearobotics.com/wiki/index.php?title&#61;Makerbot_Cupcake:_R1 R1]|Madrid|[http://www.iearobotics.com/wiki/index.php?title&#61;Prusa_Mendel:_R2D2 '''Mas información''']|File:Prusa-r2d2-clon.jpg|File:R2d2.jpg}}<br />
<br />
<br />
{{Template:CloneWars_clon|13|R3|[[Prusa Mendel (iteration 2)|Prusa Mendel Iteración 2]]|1|01/Abril/2012|[http://www.iearobotics.com/wiki/index.php?title&#61;Juan_Gonzalez:Main Juan González Gómez] (Obijuan)|[http://www.iearobotics.com/wiki/index.php?title&#61;Prusa_Mendel:_R2D2 R2D2]|Madrid|[http://www.iearobotics.com/wiki/index.php?title&#61;Prusa_Mendel_Iteraci%C3%B3n_2:_R3 '''Mas información''']| File:R3-1.jpg | File:R3.jpg }}<br />
<br />
|---------------<br />
| <center>[[File:Clon-Deathstar 2012-01-07 1-r2.jpg|200px|link=Clone wars:Impresora Death Star]]</center><br />
|<br />
* '''Clon #2''': '''<font color="#0000FF">Death Star</font>'''<br />
* '''Lugar''': MADRID<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original<br />
* '''Generación''': 1<br />
* '''Autor''': Fernando Salceda Álvarez (klonando)<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:MADRE MADRE]<br />
* '''Descendencia''': [[Clone_wars:_The_Clone_UA|The Clone UA]], [[Clone_wars:_TIEFighter|TIE Fighter]], [[Clone_Wars:_Tron|Tron]]<br />
* '''Nacimiento''': 06/Enero/2012<br />
* '''[[Clone_wars:Impresora_Death_Star|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Deathstar.png|150px|link=Clone wars:Impresora Death Star]]</center><br />
|----------------<br />
| <center>[[File:Jedi manuela.jpg|220px|]]</center><br />
|<br />
* '''Clon #10''': '''<font color="#0000FF">Manuela</font>'''<br />
* '''Lugar''': Valladolid<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original modificada con piezas V2 <br />
* '''Generación''': 1<br />
* '''Autor''': Jose Luis del Olmo (Macnetic)<br />
* '''Impresora Progenitora''': Desconocida<br />
* '''Descendencia''': [[Clone Wars: Impresora Pepa|Pepa]], [[Clone wars:Impresora Daneel 3-law|Daneel 3-law]], C3PO, Michaelmas, Alcar, Shmi Skywalker, Prusikito, Nazgul hijo de Manuela<br />
* '''Nacimiento''': 02/Marzo/2012<br />
* '''[[Clone wars:Impresora Manuela|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Macnetic.png|200px]]</center><br />
|-----<br />
| <center>[[File:Clon-32-guaifi.jpg|200px]]</center> <br />
|<br />
* '''Clon #32''': '''<font color="#0000FF">Guaifi</font>'''<br />
* '''Lugar''': A Coruña<br />
* '''Familia''': [[Prusa Mendel (iteration 2)]], con mejoras de piezas<br />
* '''Generación''': 2 <br />
* '''Autor''': Fidel Fraga Fernández (@guaifi)<br />
* '''Impresora Progenitora''': [[Clone wars: Impresora Ociorum|Ociroum/Bricolabs]]<br />
* '''Descendencia''': Abe, Matrix, Laura Palmer<br />
* '''Nacimiento''': 10/Jun/2012<br />
* [http://fidelfraga.eu/content/impresora-3d MÁS INFORMACIÓN]<br />
: <br />
|<center> [[File:Guaifi-logo-temp.png|200px]]</center><br />
|-----------<br />
<br />
| <center>[[File:J52-r1.jpg|200px|]]</center><br />
|<br />
* '''Clon #9''': '''<font color="#0000FF">Johnny 5</font>'''<br />
* '''Lugar''': Alicante<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original modificada con piezas de la V2<br />
* '''Generación''': 1<br />
* '''Autor''': [http://www.mbrobotics.es/MbRobotics/Main.html MABLACK (Miguel Angel Berna Alberola)]<br />
* '''Impresora Progenitora''': Desconocida<br />
* '''Descendencia:''' EVE, WALL-E, Kneesaa, Conguito 3D, Nexus 6, Wedge, Queen Mother<br />
* Nacimiento: '''25/Febrero/2012'''<br />
* '''[http://www.mbrobotics.es/Wiki/index.php?title=JOHNNY5 MAS INFORMACIÓN]'''<br />
|<br />
<center> [[File:J5.jpg|200px]]</center><br />
<br />
{{Template:CloneWars_clon|39|Daneel 3-law|Prusa Iteracion 2|2|11/Agosto/2012|Alejandro Suárez, Javier Briz|[[Clone wars:Impresora Manuela|Manuela]]|Universidad de Zaragoza|[[Clone wars:Impresora Daneel 3-law | '''Mas información''']] |File:Clone-39-Daneel 3-law jedi.png|File:Logo_pulsar.png}}<br />
<br />
|-----------<br />
| <center>[[File:Clon-30-xwing.jpg|250px]]</center> <br />
|<br />
* '''Clon #30''': '''<font color="#0000FF">X-Wing</font>'''<br />
* '''Lugar''': Universidad de Málaga<br />
* '''Familia''': [http://asrob.uc3m.es/index.php/Clone_wars:_Prusa_Iteraci%C3%B3n_2 Prusa Mendel Iteration 2]<br />
* '''Generación''': 2 <br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel:_R2D2 R2D2]<br />
* '''Autor''': [http://blog.reclone3d.com Exergy123]<br />
* '''Descendencia:''': Y-Wing,Restaun3d,LAAT,Bumblebee<br />
* '''Nacimiento''': 26/Jun/2012<br />
* '''[[Clone wars:Impresora X Wing|MÁS INFORMACIÓN]]'''<br />
: <br />
|<center> [[File:Xwing_RS3.jpg|150px]]</center><br />
|----------<br />
| <center>[[File:Potato-r1.png|200px]]</center> <br />
|<br />
* '''Clon #16''': '''<font color="#0000FF">Potato</font>'''<br />
* '''Lugar''': Universidad Carlos III de Madrid<br />
* '''Familia''': Prusa iteración 2<br />
* '''Generación''': 1<br />
* Autores: [https://plus.google.com/108347194424547002289/about Santiago López]<br />
* '''Impresora Progenitora''': Holandesa ebay<br />
* '''Nacimiento''': 15/Abril/2012<br />
* '''[[Clone wars: Impresora Potato|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Mrpotato.jpg|140px]]</center><br />
|----------<br />
| <center>[[File:Clon-17-uterus.jpg|280px]]</center> <br />
|<br />
* '''Clon #17''': '''<font color="#0000FF">Úterus</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa iteración 2<br />
* '''Generación''': 2<br />
* Autor: Juan Manuel Amuedo González (Coleóptero)<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel:_R2D2 R2]<br />
* '''Descendencia''': [[Clone wars:Impresora Geek-X-truder|Geek-X-truder]], Kubrick, [[http://www.reprap.org/wiki/Clone_wars_Impresora_Moebius|Moebius]]<br />
* '''Nacimiento''': 05/Mayo/2012<br />
* [[Clone wars: Impresora Uterus|MÁS INFORMACIÓN]]<br />
|<br />
<center> [[File:SuperUterus-big-475x382.png|140px]]</center><br />
|----------<br />
| <center>[[File:Clon-41-Geek-X-truder.jpg|150px]]</center> <br />
|<br />
*'''Clon #41''': '''<font color="#0000FF">Geek-X-truder</font>'''<br />
* '''Tipo''': Printrbot<br />
* '''Generación''': 3<br />
* '''Impresora progenitora''': [[Clone wars:_Impresora_Uterus|Uterus]]<br />
* '''Descendencia''': Reena, SanValero, Mamabot, Ignacio, Bruno, Ocellet, Daniel F., Antonio M., Maikel<br />
* '''Autor''': Pablo Murillo - [http://www.arduteka.com '''Arduteka''']<br />
* '''Zaragoza'''<br />
* '''Nacimiento''': 26/Agosto/2012<br />
* '''[[Clone_wars:Impresora Geek-X-truder|MÁS INFORMACIÓN]]'''<br />
: <br />
|<br />
<center> [[File:Banner_Arduteka.png|150px]]</center><br />
|-----------<br />
| <center>[[File:2012-02-07-paclemaker.jpg|200px|link=Clone wars:Impresora PacleMAKER]]</center> <br />
|<br />
* '''Clon #7''': '''<font color="#0000FF">PacleMAKER</font>''' <br />
* '''Lugar''': Universidad Politécnica de Madrid<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original<br />
* '''Generación''': 1<br />
* '''Universidad Politécnica de Madrid'''<br />
* '''Autor''': Pablo Clemente<br />
* '''Impresora Progenitora''': Thing-o-matic de la UPM<br />
* Nacimiento: '''7/Febrero/2012'''<br />
* '''[[Clone wars:Impresora PacleMAKER|MÁS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:PacleMaker-logo.png|200px|link=Clone wars:Impresora PacleMAKER]]</center><br />
|---------<br />
| <center>[[File:Clon-55-Y-Wing.jpg|220px]]</center><br />
|<br />
* '''Clon #55''': '''<font color="#0000FF">Y-Wing</font>'''<br />
Pertenece a Reclone3d's Farm<br />
* '''Lugar''': Universidad de Málaga<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 3<br />
* '''Autor''': Exergy123<br />
* '''Impresora Progenitora''': X-Wing<br />
* Nacimiento: '''13/Octubre/2012''' a las 20:00<br />
* [MÁS INFORMACIÓN]<br />
| <center>[[File:Y-Wing.jpg|200px]]</center><br />
|---------<br />
| <center>[[File:Clone-23-The Clone UA Jedi.jpg|200px]]</center> <br />
|<br />
* '''Clon #23''': '''<font color="#0000FF">The Clon UA</font>'''<br />
* '''Lugar''': Universidad de Alicante <br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 2<br />
* Autor: Diego Viejo<br />
* '''Impresora Progenitora''': [[Clone wars:Impresora Death Star|Deathstar]]<br />
* '''Nacimiento''': 23/Mayo/2012<br />
* '''Descendencia''': [[Clone_wars:_Impresora_Dolly|Dolly]] Axlotl Tank y Robotijo<br />
* '''[[Clone_wars:_The_Clone_UA/es|MÁS INFORMACIÓN]]'''<br />
|<center> [[File:Clone_UA_logo.png|150px]]</center><br />
|---------<br />
| <center>[[File:Clon-79-SpongeBot.jpg|200px]]</center> <br />
|<br />
* '''Clon #79''': <font color="#0000FF">SpongeBot (R.I.P.)</font><br />
* '''Lugar''': A coruña<br />
* '''Familia''': Prusa iteración 2<br />
* '''Generación''': 4<br />
* '''Autor''': Alejandro Taracido (TCRobotics)<br />
* '''Impresora progenitora''': Clon #48: Matrix<br />
* '''Nacimiento''': 27/Nov/2012<br />
* '''Descendencia''': Clon #187: Super 8, Clon #188: BruceIsPrinting, Clon #221: IG-88<br />
| | <center>[[File:Spongebot-logo.png| 150px]]</center> <br />
|---------<br />
| <center>[[File:Clon-53-Michaelmas.jpg|220px|]]</center><br />
|<br />
* '''Clon #53''': '''<font color="#0000FF">Michaelmas</font>'''<br />
* '''Lugar''': Valladolid<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2] <br />
* '''Generación''': 2<br />
* '''Autor''': Jose Luis del Olmo (Macnetic)<br />
* '''Impresora Progenitora''': Manuela<br />
* '''Descendencia''': VirPrusa, Prusacervi, Rincewind, Jendrinator<br />
* Nacimiento: '''05/Octubre/2012'''<br />
* '''[[Clone wars:Impresora Michaelmas|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Macnetic.png|200px]]</center><br />
|---------<br />
| <center>[[File:Super_8CW.jpg|250px]]</center> <br />
|<br />
* '''Clon #187:''' <font color="#0000FF">'''Super 8'''</font>.<br />
* '''Lugar''': A Coruña.<br />
* '''Familia''': Prusa Iteración 3<br />
* '''Generación''': 5<br />
* '''Autor''': [[User:XoanSampaiño|Xoan Sampaiño]]<br />
* '''Impresora progenitora''': Clon #79, SpongeBot (R.I.P.)<br />
* '''Nacimiento:''' 29 de marzo de 2013<br />
* '''Electrónica''': [[Gen7 Board-AVR 1.5]]<br />
* '''Hot-End''': [http://www.printallthethings.com/en/home/40-j-head-peek.html J-Head PEEK]<br />
* '''Firmware''': [[Marlin]]<br />
* '''Descendencia'''<br />
** Clon #218: SpongeBot Reloaded<br />
** Clon #255: Boneca<br />
** Clon #262: Gladiator<br />
** Clon #298: Ingenio<br />
** Clon #311: Ctrl-Z<br />
** Clon #318: AgroBot<br />
** Clon #335: Pop<br />
| <center>[[File:Super_8CW_Logo.jpg|150px]]</center><br />
|----------<br />
| <center>[[File:Clone-26-Rewok.png|200px]]</center> <br />
|<br />
* '''Clon #26''': '''<font color="#0000FF">Rewok</font>'''<br />
* '''Lugar''': Ourense<br />
* '''Familia''': PrintrBot<br />
* '''Generación''': 1<br />
* '''Autor''': Carlos Currás (Aisflou)<br />
* '''Impresora Progenitora''': [[MakerGear Mosaic 1: MAF-1|MAF-1]]<br />
* '''Descendencia''': Khan, Torcal, Element 115<br />
* '''Nacimiento''': 13/Jun/2012<br />
* '''[[Clone wars: Impresora Rewok|MÁS INFORMACIÓN]]'''<br />
|<center> [[File:Rewok.jpg|150px]]</center><br />
|------------- <br />
| <center>[[File:Telchar.JPG|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #122''': <font color="#0000FF">Telchar, Extrusor de Mithril</font><br />
* '''Lugar''': Málaga<br />
* '''Familia''': Mendel Prusa Iteración 2<br />
* '''Generación''': 3<br />
* '''Autor''': Paco Martos (Paclón)<br />
* '''Impresora progenitora''': X-Wing [http://www.reprap.org/wiki/Clone_wars:Impresora_X_Wing]<br />
* '''Descendencia''':<br />
** Destriers (Clon #212)<br />
** Prisma I3 (Clon #233)<br />
** BliztCrank (Clon #310) <br />
* '''Nacimiento''':16/Enero/2013<br />
*[[Clone wars: Telchar|MAS INFORMACION]]<br />
| <center>[[File:Telchar1.JPG|250px]]</center><br />
|-------------<br />
|---------<br />
| <center>[[File:PrusaCervi.jpg|200px]]</center> <br />
|<br />
* '''Clon #136:''' <font color="#0000FF"> '''PRUSACERVI'''</font>.<br />
* '''Lugar:''' Madrid.<br />
* '''Tipo:''' [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa2]<br />
* '''Autor:''' CACER (Familia Cervilla)<br />
* '''Impresora progenitora:''' Michaelmas.<br />
* '''Nacimiento:''' 12 de Febrero de 2013<br />
* '''Descendencia:''' SAV Vader | XxPacerxX (En fase de calibrado)<br />
|<center> [[File:Cacer.jpg|200px]]</center><br />
|--------<br />
|}<br />
<br />
=== Consejero Jedi Supremo ===<br />
* '''Descripción''': Clones que hayan parido '''DOS clones''' totalmente operativos (Jedi)<br />
* '''Para subir de categoría''': Parir otro clon más<br />
{| class="wikitable" style="width:100%"<br />
|-------------<br />
| <center>[[File:Clon-mardan.jpg|200px|link=Clone wars:Impresora Mardan]]</center><br />
|<br />
* '''Clon #4''': '''<font color="#0000FF">Mardan</font>'''<br />
* '''Luegar''': Universidad Carlos III de Madrid<br />
* '''Familia''': [[Prusa_Mendel_(iteration_1)]]<br />
* '''Generación''': 1<br />
* '''Autor''': Marco Esteban Illescas<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:MADRE MADRE]<br />
* '''Descendencia''': Marvin, Howarto<br />
* Nacimiento: '''19/Enero/2012'''<br />
* '''[[Clone wars:Impresora Mardan|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Potato.jpg|150px|link=Clone wars:Impresora Mardan]]</center><br />
|---------<br />
| <center>[[File:Clon-44-Othon.jpg|200px]]</center> <br />
|<br />
* '''Clon #44''': '''<font color="#0000FF">Othon</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa 2<br />
* '''Generación''': 2<br />
* '''Autor''': Álvaro Ollero AKA Damrod AKA Fuintur<br />
* '''Nacimiento''': 22/07/2012 (primera pieza impresa)<br />
* '''Impresora progenitora''': [http://reprap.org/wiki/Clone_wars:Impresora_PacleMAKER PacleMAKER]<br />
* '''Descendencia''': [http://reprap.org/wiki/Clone_Wars:_Roi Roi], Plottercín3d<br />
* [http://reprap.org/wiki/Clone_Wars:_Othon '''MÁS INFORMACIÓN''']<br />
: <br />
|<br />
<center> [[File:Othon.jpg|150px]]</center><br />
|-------------<br />
| <center>[[File:Clon-46-3D-Prisa.jpg|150px]]</center><br />
|<br />
* '''Clon #46''': '''3D Prisa'''<br />
* '''Lugar''': Madrid<br />
* '''Tipo''': [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Generación''': 1<br />
* '''Autor''': Fernando Remiro<br />
* '''Impresora progenitora''': Plumabot_M<br />
* '''Descendencia''': Arturo, The Orange Printwork<br />
<br />
* '''Nacimiento''': 6/9/2012 (acabada)<br />
* [[Clone wars: Impresora 3D-Prisa|MÁS INFORMACIÓN]]<br />
|<center>[[File:Remiro-1.jpg|150px]]</center> <br />
|---------<br />
| <center>[[File:Clone-49-R5D5.jpg|200px|link=Clone_Wars:_R5D5]]</center> <br />
|<br />
* '''Clon #49''': [[Clone Wars: R5D5|'''R5D5''']]<br />
* '''Lugar''': Vitoria-Gasteiz<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Generación''': 1<br />
* '''Autor''': Raul Jimenez.<br />
* '''Impresora progenitora''': Desconocida.<br />
* '''Nacimiento''': 11/Septiembre/2012<br />
* [[Clone wars:RepRap Prusa2 R5D5|MÁS INFORMACIÓN]]<br />
|<br />
<center> [[File:711 4.jpg|150px]]</center><br />
|-------------<br />
| <center>[[File:Clon-75-bumblebee.png|200px]]</center> <br />
|<br />
* '''Clon #75''': <font color="#0000FF">Bumblebee</font><br />
* '''Lugar''': Mollet del Vallès (Barcelona)<br />
* '''Familia''': Printrbot v2<br />
* '''Autores''': Ariadna Trueba y Juan Pedro López<br />
* '''Impresora progenitora''': X-Wing<br />
* '''Nacimiento''': 22-11-2012<br />
* '''Descendencia''': C-Wing (clon #169), TKL 1.0 (clon #183)<br />
* [[Clone Wars:Impresora Bumblebee|MÁS INFORMACIÓN]]<br />
| | <center>[[File:Bumblebee-CW-logo.jpg | 200px]]</center> <br />
|--------------<br />
| <center>[[File:Jedi GrBot3D.jpg|300px]]</center><br />
*Asignado: ok<br />
*Recortador : Paclon<br />
|<br />
* '''Clon #125:''' <font color="#0000FF">GrBot-3D</font> <br />
* '''Lugar:''' Granada<br />
* '''Modelo:''' Prusa Iteration 2<br />
* '''Autor: Federico Coca<br />
* '''Impresora progenitora:''' Plumabot_Gr<br />
* '''Generación:''' 1<br />
* '''Nacimiento''':19/Enero/2013 (Acabada)<br />
* '''Descendencia (Hijos)''': [http://www.reprap.org/wiki/Clone_Wars:_Impresora_AVATAR ÁVATAR] - [http://reprap.org/wiki/Clone_Wars:_Impresora_Nabla Nabla]<br />
* '''Descendencia (Nietos)''': NeuroBot<br />
* [[Clone Wars: Impresora GrBot3D|MAS INFORMACIÓN]]<br />
| <center>[[File:GranaBot.jpg|150px]]</center><br />
<br />
|--------------<br />
| <center>[[File:20121130_201247.jpg|150px]]</center><br />
|<br />
* '''Clon #155:'''<font color="#0000FF">''' CAZURRA'''</font>.<br />
* Modelo: Prusa Mendel (interación 2)[http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2]<br />
* Autor: Jose Angel (jakolete)<br />
* Lugar: León<br />
* Progenitor: Death Star<br />
*'''Nacimiento:''' 15/01/2013<br />
* '''Electrónica:''' Sanguinololu [http://reprap.org/wiki/Sanguinololu]<br />
* '''Firmware:''' [https://github.com/algspd/asimov/tree/master/impresoras/giskard/Sprinter Sprinter modificado por Pulsar]<br />
* '''Hot-End:''' LEONOZZLE <br />
* '''Extrusor:''' (plástico de 3.00mm)<br />
* '''Descendencia''': MAQ1_MULTIJUGOS, RubenFerrero, Putativos....<br />
|<center> [[File:click.gif|150px]]</center><br />
|-------------<br />
| <center>[[File:BlackKnight.jpg|250px]]</center><br />
|<br />
* '''Clon #100.06''': <font color="#0000FF">Black Knight</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa Iteration 2<br />
* '''Generación''': 4<br />
* '''Autor''': Nuria Almodóvar, J.Vicente Almodovar<br />
* '''Impresora progenitora''': R2-Reloaded (Obijuan)<br />
* '''Nacimiento''': 21/Dic/2012<br />
* '''Descendencia''': <br />
** Clon #180 Clockwork Orange (Xherry)<br />
** Clon #251 Red Baron (Equipo Almodovar)<br />
<br />
| <center>[[File:The-Black-Knight-Rises.jpg|250px]]</center><br />
|-------------<br />
{{Template:CloneWars_clon|133|Ronquío|Prusa Iteration 2|3|28/Enero/2013|José Antonio Pérez Caparrós| JPi| Universidad de Jaén |[http://reprap.org/wiki/Clone_wars:_Ronqu%C3%ADo/es Clone wars: Impresora Ronquío]| File:Clon 133 Ronquio.jpg | File:Escudo Bit UJAxp.gif }}<br />
|---------<br />
|--------<br />
| <center>[[File:Cacharro-600px.png|250px]]</center><br />
|<br />
* '''Clon #168:'''<font color="#0000FF">''' Cacharro'''</font>.<br />
* '''Lugar''': Tarragona, España<br />
* '''Tipo''': Printrbot V2<br />
* '''Autor''': Vasil Valkov<br />
* '''Impresora progenitora: Gandalf the Transparent<br />
**'''Nacimiento:''' 08/03/2013<br />
**'''Electrónica:''' SAV MkI<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End: E3D <br />
| <center>[[File:Cacharro.jpg|150px]]</center><br />
|--------<br />
|}<br />
<br />
=== Consejero Jedi: Miembro del consejo jedi ===<br />
<br />
* '''Descripción''': Clones que hayan parido '''un clon''' totalmente operativo (Jedi). Por tanto, son clones con descendencia<br />
* '''Para subir de categoría''': Parir otro clon más<br />
{| class="wikitable" style="width:100%"<br />
|---------<br />
| <center>[[File:Misan1-r1.png|200px]]</center> <br />
|<br />
* '''Clon #19''': '''<font color="#0000FF">Black Misan</font>'''<br />
* '''Lugar''': Valencia <br />
* '''Familia''': Prusa mendel original <br />
* '''Generación''': 1<br />
* '''Autor''': Miguel Sánchez<br />
* '''Impresora Progenitora''': Piezas compradas RepRap-fab.org (Stoffel15)<br />
* '''Descendencia''': Blue Misan (y parte de Ukraine)<br />
* '''Nacimiento''': 23/Octubre/2011 <br />
* '''[[Clone Wars: Impresora Black Misan|MÁS INFORMACIÓN]]<br />
|<center> [[File:Photo.jpg|150px]]</center><br />
|----------<br />
| <center>[[File:Misan2-r3.png|200px]]</center> <br />
|<br />
* '''Clon #20''': '''<font color="#0000FF">Blue Misan</font>'''<br />
* '''Lugar''': Valencia <br />
* '''Familia''': Prusa iteración 2<br />
* '''Generación''': 2<br />
* '''Autor''': Miguel Sánchez<br />
* '''Impresora Progenitora''': [[Clone Wars: Impresora Black Misan|Black Misan]]<br />
* '''Descendencia''': Ukraine<br />
* '''Nacimiento''': 15/Marzo/2012<br />
* '''[[Clone Wars: Impresora Blue Misan|MÁS INFORMACIÓN]]<br />
|<center> [[File:Photo.jpg|150px]]</center><br />
|----------<br />
| <center>[[File:Clon halcon milenario.png|200px|link=Clone wars:Impresora Halcón Milenario]]</center><br />
|<br />
* '''Clon #5''': '''<font color="#0000FF">Halcón Milenario</font>'''<br />
* '''Lugar''': Universidad Autónoma de Madrid<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original, con rodamientos lineales<br />
* '''Generación''': 1<br />
* '''Autores''': <br />
** Carlos García Saura<br />
** Miembros del [http://www.uam.es/crm Club de Robótica y Mecatrónica de la UAM]<br />
* '''Impresora Progenitora''': Desconocida<br />
* '''Descendencia''': Lucy<br />
* '''Nacimiento''': 27/Enero/2012<br />
* '''[[Clone wars:Impresora Halcón Milenario|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Milleniumfalcon2.jpg|200px|link=Clone wars:Impresora Halcón Milenario]]</center><br />
|-----------<br />
| <center>[[File:IMG 1310.jpg|200px|link=http://asrob.uc3m.es/index.php/Clone_wars:_Impresora_Ociorum]]</center> <br />
| <br />
* '''Clon #15''': '''<font color="#0000FF">Ociorum/Bricolabs</font>'''<br />
* '''Lugar''': Coruña (Galicia)<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 1<br />
* '''Autores''':<br />
** Alejandro Taracido ([http://twitter.com/#!/TCRobotics @TCRobotics )] [http://tcrobotics.blogspot.com/2011/05/orugasrobot-arduinoorugaspan.html Blog TCRobotics] <br />
** Fidel Fraga ([http://twitter.com/#!/guaifi @guaifi )]<br />
** Quico Prol ([http://twitter.com/#!/quicoprol @quicoprol )]<br />
** Xulio Coira ([http://twitter.com/#!/xulioc @xulioc )]<br />
* '''Impresora Progenitora''': Holandesa ebay<br />
* '''Nacimiento''': 13/Abril/2012<br />
* '''Descendencia''': Guaifi<br />
* [http://www.ociorum.org Asociación Ociorum]<br />
* [[Clone wars: Impresora_Ociorum|MÁS INFORMACIÓN]]<br />
| <center> [[File:Ociorum.jpeg|200px]]</center><br />
|--------------<br />
| <center>[[File:Clon-maese-artorius.jpg|200px|link=http://asrob.uc3m.es/index.php/Clone_wars:Impresora_Maese_Artorius]]</center><br />
|<br />
* '''Clon #3''': '''<font color="#0000FF">Maese Artorius</font>'''<br />
* '''Luegar''': Universidad Carlos III de Madrid<br />
* '''Familia''': [[Prusa_Mendel]] original<br />
* '''Generación''': 1<br />
* '''Autor''': Arturo Vera García<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:MADRE MADRE]<br />
* '''Descendencia''': jP<br />
* Nacimiento: '''19/Enero/2012'''<br />
* '''[[Clone_wars:Impresora_Maese_Artorius|MAS INFORMACIÓN]]'''<br />
| <center> [[File:86509-50249-mace-windu_large.jpg|150px|link=Clone wars:Impresora Maese Artorius]]</center><br />
|-----------<br />
| <center>[[File:R2-Reloaded-decorada.png|200px]]</center> <br />
|<br />
*'''Clon #42''': '''<font color="#0000FF">R2-RELOADED</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Tipo''': Prusa 2<br />
* '''Generación''': 3<br />
* '''Autor''': [http://www.iearobotics.com/wiki/index.php?title=Juan_Gonzalez:Main Juan Gonzalez Gomez] (Obijuan)<br />
* '''Nacimiento''': 28/Agosto/2012<br />
* '''Impresora progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R3 R3]<br />
* '''Descendencia''': Maniotas<br />
* [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R2-reloaded '''MÁS INFORMACIÓN''']<br />
: <br />
|<br />
<center> [[File:R2-reloaded.png|150px]]</center><br />
|-------------<br />
| <center>[[File:matrix_printer.png|200px]]</center> <br />
|<br />
* '''Clon #48''': [[Clone Wars: Matrix|'''Matrix''']]<br />
* '''Lugar''': Vilalba (Lugo)<br />
* '''Tipo''': PrintrBot v2<br />
* '''Generación''': 3<br />
* '''Autor''': Diego Prado ([http://twitter.com/diego_p_g @diego_p_g])<br />
* '''Impresoras progenitoras''': [[Clone wars: Impresora Ociorum|'''Ociroum/Bricolabs''']], [http://fidelfraga.eu/content/impresora-3d '''Guaifi''']<br />
* '''Descendencia''': SpongeBot<br />
* '''Nacimiento''': 30 de Agosto de 2012 <br />
|<br />
<center> [[File:matrix.jpg|200px]]</center><br />
|---------<br />
| <center>[[File:Laura.jpg|200px]]</center> <br />
|<br />
* '''Clon #63''': '''<font color="#0000FF">Laura Palmer</font>'''<br />
* '''Lugar''': Vicus Spacorum<br />
* '''Familia''': Prusa iteration 2 con mejoras de piezas<br />
* '''Generación''': 3<br />
* '''Autor''': Alfredo Prado [https://twitter.com/radikalbytes @radikalbytes] [http://www.radikalbytes.com radikalbytes.com]<br />
* '''Impresora progenitora''': Guaifi<br />
* '''Descendencia''': Alfa-3P<br />
* '''Nacimiento''': 12 Octubre de 2012<br />
* [[Clone wars: Impresora Laura Palmer|MÁS INFORMACIÓN]]<br />
|<br />
<center> [[File:IMAG0343.JPG|200px]]</center><br />
|----------<br />
| <center>[[File:Ukraine-r1.png|200px]]</center> <br />
|<br />
* '''Clon #21''': '''<font color="#0000FF">Ukraine</font>'''<br />
* '''Lugar''': Valencia <br />
* '''Familia''': Printrbot<br />
* '''Generación''': 3<br />
* '''Autor''': Miguel Sánchez<br />
* '''Impresora Progenitora''': Black Misan & Blue Misan<br />
* '''Descendencia''': Acrylic3<br />
* '''Nacimiento''': 8/Abril/2012<br />
* [[Clone_wars:Impresora Ukraine|MÁS INFORMACIÓN]]<br />
|<center> [[File:Photo.jpg|150px]]</center><br />
|-------------<br />
|<center>[[File:Clon-51-MayPrintr.jpg|200px]]</center> <br />
|<br />
* '''Clon #51''': [[Clone wars:Impresora_MayPrinter|'''MayPrinter (R.I.P)''']]<br />
* '''Lugar:''' Algeciras (Cádiz)<br />
* '''Tipo:''' [http://www.iearobotics.com/wiki/index.php?title=Clone_wars:_Printrbot Printrbot]<br />
* '''Generación''': 2<br />
* '''Autor:''' Mariano Dapía ([http://twitter.com/iPadNanito @iPadNanito])<br />
* '''Impresora progenitora:''' [[Clone wars:_Impresora_Potato|'''Potato''']]<br />
* '''Nacimiento:''' 12 de Septiembre de 2012<br />
* '''Descendencia:''' [[Clone wars:_Impresora_Kalos|'''Kalos Printer''']]<br />
* '''Defunción:''' 28 de Marzo de 2013 <br />
|<center> [[File:InvadersMay.png|200px]]</center><br />
|---------<br />
| <center>[[File:PrusaCervi.jpg|200px]]</center> <br />
|<br />
* '''Clon #136:''' <font color="#0000FF"> '''PRUSACERVI'''</font>.<br />
* '''Lugar:''' Madrid.<br />
* '''Tipo:''' [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa2]<br />
* '''Autor:''' CACER (Familia Cervilla)<br />
* '''Impresora progenitora:''' Michaelmas.<br />
* '''Nacimiento:''' 12 de Febrero de 2013<br />
* '''Descendencia:''' SAV Vader | XxPacerxX (En fase de calibrado)<br />
|<center> [[File:Cacer.jpg|200px]]</center><br />
|--------<br />
| <center>[[File:Clon-36-Pepa.jpg|200px]]</center><br />
|<br />
*'''Clon #36''': '''<font color="#0000FF">Pepa</font>'''<br />
* Tipo: Prusa Iteracion 2<br />
* Progenitora: [http://asrob.uc3m.es/index.php/Clone_wars:Impresora_Manuela Manuela]<br />
* Autor: Jose Ignacio Alonso<br />
* Lugar:Valladolid<br />
* '''Nacimiento''': 28/Jul/2012<br />
* '''Descendencia''': Caminera<br />
* [[Clone Wars: Impresora Pepa|MÁS INFORMACIÓN]]<br />
: <br />
|<center> [[File:jia.jpg|200px]]</center><br />
|--------------------<br />
{{Template:CloneWars_clon|143|[http://www.reprap.org/wiki/Clone_Wars:_Impresora_AVATAR ÁVATAR]|Prusa Iteracion 2|2|10/Febrero/2013|Juan Robles. (jrdetoro)|[http://www.reprap.org/wiki/Clone_Wars:_Impresora_GrBot3D GRBot-3D]|Granada|Clone wars:Impresora Avatar|File:Avatar_jedim.jpg|File:Logoavatar.png}}<br />
|--------<br />
| <center>[[File:20130108_Cauldron_2.jpg|200px]] </center><br />
* En árbol<br />
|<br />
* '''Clon #100.01''': <font color="#0000FF">Cauldron</font><br />
* '''Lugar''': Colmenar Viejo (Madrid)<br />
* '''Familia''': Prusa I2<br />
* '''Generación''': 2<br />
* '''Autor''': José Ramón (JRmaciasCW)<br />
* '''Impresora progenitora''': Carbonite<br />
* '''Nacimiento''': 19/Dic/2012<br />
* [[Clone_wars:_Cauldron | Mas información]]<br />
| <center>[[File:Cauldron-icon_128.png|200px]]</center><br />
|---------<br />
| <center>[[File:Nabla.jpg|250px]]</center><br />
|<br />
* '''Clon #198:''' <font color="#0000FF"> '''Nabla'''</font>.<br />
* '''Modelo''': Prusa I2<br />
* '''Autor''': Miguel Ángel Fernández Rodríguez [[User:MAfernandezCW | (MafernandezCW)]]<br />
* '''Lugar''': Granada<br />
* '''Impresora Progenitora''': GrBot-3D[http://www.reprap.org/wiki/Clone_Wars:_Impresora_GrBot3D]<br />
* '''Electrónica''': Ramps 1.4/Mega<br />
* '''Firmware''': Sprinter superstable.<br />
* '''Hot-End''': J-Head 0.5mm<br />
* '''Nacimiento:''' 30 de Abril de 2013<br />
* '''Descendencia''': Yavin[http://www.reprap.org/wiki/Clone_wars:Impresora_Yavin]<br />
* [http://reprap.org/wiki/Clone_Wars:_Impresora_Nabla MAS INFORMACIÓN]<br />
| <center>[[File:Nabla.png]]</center><br />
|---------<br />
|<center>[[File:EA5PABLO.png|150px]]</center> <br />
|<br />
* '''Clon #138:''' <font color="#0000FF"> '''EA5'''</font>.<br />
* '''Lugar:''' Murcia<br />
* '''Tipo:''' [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Autor:''' Pablo Otón Zamora<br />
* '''Impresora progenitora:''' Mardan<br />
* '''Nacimiento:''' 30/Enero/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Extrusor:''' Jonaskuehling extruder <br />
* '''Hot-End:''' Budaschnozzle Gallego<br />
|<center>[[File:Cs-hyde-kapton-double-sided-silicone-adhesive-tape-amber-12-inch-x-36-yards.jpg|150px]]</center><br />
|---------<br />
|---------<br />
|<center>[[File:Venturprint_Jedi2.jpg|250px]]</center> <br />
Recorte: Chema<br />
|<br />
* '''Clon #181:'''<font color="#0000FF">'''-VENTURPRINT-'''</font><br />
* '''Modelo:''' [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] It2<br />
* '''Autor:''' [[User: ClampareroCW]] - Carlos Lamparero<br />
* '''Lugar:''' Colmenar Viejo (Madrid)<br />
<br />
* '''Impresora progenitora:''' Clon #134 "Giskard"<br />
* '''Generación:''' 5<br />
* '''Nacimiento:''' 23/03/2013<br />
* '''Descendencia:''' Clon #238 "FrankenPrusa"<br />
<br />
** '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
** '''Firmware:''' Marlin 1.0<br />
** '''Hot-End:''' Budas Gallego<br />
|<center>[[File:venturprint.png|200px]]</center><br />
|---------<br />
| <center>[[File:Gort_201309.jpg|150px]]</center> <br />
|<br />
* '''Clon #185''': [[Clone wars:Impresora_Gort/es|'''Gort''']]<br />
* '''Lugar''': Madrid. Madrid.<br />
* '''Familia''': [http://www.reprap.org/wiki/Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame Prusa Iteration 3 - Single Plate]<br />
* '''Generación''': 3<br />
* '''Autor''': Jose M. Martín<br />
*'''Impresora progenitora''': [[Clone wars: Impresora Uterus | Úterus]]<br />
* '''Nacimiento:''' 3 de Abril de 2013<br />
* '''Descendencia:''' Clon #320 "Shai-Hulud"<br />
* '''Electrónica''': [http://arduino.cc/en/Main/ArduinoBoardMega2560 Arduino Mega 2560] + [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Extrusor''': Greg's Wade extruder for Prusa i3<br />
* '''Hot-End''': [http://shop.reclone3d.com/es/extrusores-y-hot-ends/104-hispania.html J-Head hispania]<br />
* '''Firmware''': Marlin<br />
* '''Primer juego de piezas completo para descendencia: 31/10/2013<br />
| <center>[[File:CloneWars_GORT.jpg|150px]]</center><br />
|---------<br />
|}<br />
<br />
=== Jedi Masters ===<br />
<br />
* '''Descripción''': Clones totalmente operativos, que han impreso al menos 1 juego de piezas para construir otro clon.<br />
* '''Para subir de categoría''': Tener descendencia. Se debe parir un clon completo (totalmente operativo)<br />
<br />
{| class="wikitable" style="width:100%"<br />
|---------<br />
| <center>[[File:Clone-52-carbonite.png|200px|Carbonite Team]]</center> <br />
|<br />
* '''Clon #52''': '''<font color="#0000FF">Carbonite</font>'''<br />
* '''Lugar''': Alcalá de Henares - Madrid<br />
* [http://www.complubot.org Asociación de Robótica Educativa Complubot]<br />
*'''Familia''':[[Clone wars: Prusa Mold|Prusa Mold]]<br />
* Autores: <br />
** Nerea de la Riva<br />
** Iván Gallego<br />
** Eduardo Gallego (el que compra las cosas)<br />
*'''Nacimiento''': 25 de septiembre de 2012<br />
* [[Clone wars: Impresora Carbonite|MÁS INFORMACIÓN]]<br />
|<center> [[File:Avatar_complubot.png|150px|link=http://www.complubot.org]]</center><br />
|------------- <br />
| <center>[[File:Clon-71-Liperap.jpg|250px]]</center> <br />
|<br />
* '''Clon #71 ''': <font color="#0000FF">LipeRap</font><br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': Prusa Iteracion 2<br />
* '''Autor''': Pedro Clemente<br />
* '''Impresora progenitora''': Cadesign<br />
* '''Nacimiento''': 22/Oct/2012<br />
|<center>[[File:Liperap-logo.png|250px]]</center> <br />
|---------<br />
| <center>[[File:Clon-43-Tron.jpg|200px]]</center> <br />
|<br />
* '''Clon #43''': [[Clone_Wars:_Tron|'''Tron''']]<br />
* Lugar: Madrid<br />
* Tipo: Prusa iteration 2<br />
* Autor: Ramon Rivas, Edgar Salas y Guillermo Welch (G.W.C.).<br />
* '''Impresora progenitora''': [[Clone wars:Impresora Death Star|Death Star]]<br />
* Nacimiento: 4 de Septiembre de 2012<br />
* [[Clone wars:_Tron|MÁS INFORMACIÓN]]<br />
|<center> [[File:TronLogo.png|200px]]</center><br />
|----------<br />
| <center>[[File:nazgul_hijo_de_manuela.jpg|250px]]</center><br />
* En Arbol<br />
|<br />
* '''Clon #100.07''': <font color="#0000FF">Nazgul hijo de Manuela</font><br />
* '''Lugar''': Irún<br />
* '''Familia''': Prusa Iteration 2<br />
* '''Generación''': 2<br />
* '''Autor''': Ángel Andrés Lerena Pariente<br />
* '''Impresora progenitora''': Manuela<br />
* '''Nacimiento''': 28/Dic/2012<br />
| <center>[[File:nazgul.jpg|250px]]</center> <br />
|-------------<br />
| <center>[[File:Kneesaa.jpg|220px]]</center><br />
|<br />
* '''Clon #58''': '''<font color="#0000FF">[http://www.reprap.org/wiki/Clon_Wars:_Impresora_Kneesaa Kneesaa]</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 2<br />
* '''Autor''': Roberto Cancela (Maxit)<br />
* '''Impresora Progenitora''': [http://www.mbrobotics.es/Wiki/index.php?title=JOHNNY5 JOHNNY5]<br />
* '''Nacimiento''': '''25/Octubre/2012''' a las 16:00<br />
| <center>[[File:Kneesa-avatar.jpg|180px]]</center><br />
|--------------<br />
| <center>[[File:Dokesprinter.JPG|250px]]</center><br />
*Asignado: ok<br />
*Recortador : Doke<br />
| <br />
* '''Clon #129:''' <font color="#0000FF">DOKE</font> <br />
* '''Lugar:''' Bilbao, España<br />
* '''Modelo:''' Prusa Iteration 2<br />
* '''Autores:''' David Deza y Nerea Calvo<br />
* '''Impresora progenitora:''' Daniel3-Law<br />
* '''Generación:''' 3<br />
* '''Nacimiento''':27/Enero/2013<br />
|<center>[[File:Doke logo.jpg|250px|link=http://d0ke.wordpress.com]]</center><br />
|--------------<br />
| <center>[[File:Ariel-i3 WEB.jpg|150px]]</center> <br />
|<br />
* '''Clon #164:'''<font color="#0000FF">'''ARIEL'''</font>.<br />
* '''Lugar''': Vila-real<br />
* '''Tipo''': Prusa it3 con marco de madera<br />
* '''Autor''': Arturo Sancho<br />
* '''Impresora progenitora: Giskard<br />
**'''Nacimiento:''' 02/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End''': JHead 0,5<br />
|<center> [[File:Avatar.jpg|150px]]</center><br />
|--------------<br />
| <center>[[File:Clon-74-LAAT.jpg|200px]]</center> <br />
|<br />
* '''Clon #74''': <font color="#0000FF">LAAT</font><br />
* '''Lugar''': Mislata ( Valencia )<br />
* '''Familia''': Prusa Iteration 2<br />
* '''Autor''': Jorge Balaguer y Antonio Carbonell ( [ http:\\blog.2nand.com 2nand ] )<br />
* '''Impresora progenitora''': X-Wing<br />
* '''Nacimiento''': 20-11-2012<br />
* [[Clone Wars:Impresora LAAT|Mas información]]<br />
| | <center>[[ File: laat2.jpg | 150px]]</center> <br />
|--------------<br />
|<center>[[File:R4i3.jpg|250px]]</center> <br />
|<br />
* '''Clon #190:''' <font color="#0000FF">'''R4i3'''</font>.<br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa i3<br />
* '''Autores''': Juan Gonzalez y Andrés Prieto-Moreno<br />
* '''Impresora progenitora''': R3<br />
* '''Nacimiento''': 13 de abril de 2013<br />
* [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:_R4i3 MAS INFORMACIÓN]<br />
|<center>[[File:250px-R4 negtd.jpg|150px]]</center><br />
|-------------<br />
| <center>[[File:Abarthi2.jpg|250px]]</center><br />
|<br />
* '''Clon #146:'''<font color="#0000FF">''' Abarth'''</font>.<br />
* '''Lugar:''' Castell de guadalest (Alicante)<br />
* '''Tipo:''' Prusa Iteration 2 [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2]<br />
* '''Autor:''' Josep Balaguer<br />
* '''Impresora progenitora:''' Mardan [http://www.reprap.org/wiki/Clone_wars:Impresora_Mardan]<br />
*'''Nacimiento:''' 12/12/2012<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' Marlin<br />
* '''Hot-End:''' Budas Gallego 2ºGeneración // Farynozzle 2.0<br />
|<center>[[File:Abarth.jpg|250px|200px]]</center><br />
|---------<br />
|<center></center><br />
|<br />
* '''Clon #191:''' <font color="#0000FF">'''Zoltan'''</font>.<br />
* '''Lugar''': Rivas Vaciamadrid, Madrid.<br />
* '''Familia''': Prusa iteracción 2<br />
* '''Generación''': 3<br />
* '''Autor''': Alberto Otero <br />
*'''Impresora progenitora''': Clon #100.01 Cauldron<br />
* '''Nacimiento:''' 14 de Abril de 2013<br />
* '''Electrónica''': [[Ramps 1.4]]<br />
* '''Hot-End''': Farynozzle 2.0<br />
* '''Firmware''': Sprinter<br />
|<center>[[File:Zoltan.jpg|150px]]</center><br />
|---------<br />
|------<br />
| <center>[[File:Clockwork_Orange.jpg|250px]]</center><br />
|<br />
* '''Clon #180:'''<font color="#0000FF">''' -Clockwork Orange-'''</font>.<br />
* '''Lugar''': Navarra<br />
* '''Tipo''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Autor''': Xherry<br />
* '''Impresora progenitora:''' ""Black Knight"" <br />
* '''Generación''': 5<br />
**'''Nacimiento:''' 03/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End''': Budas Chino de Fabster3d<br />
|<center>[[File:A_clockwork_orange_wallpaper.jpg|150px]]</center><br />
|---------<br />
| <center>[[File:Oktopus2.jpg|250px]]</center><br />
|<br />
* '''Clon #172:'''<font color="#0000FF">''' [http://www.reprap.org/wiki/User:SbarrasCW Oktopus]'''</font>.<br />
* '''Lugar''': Madrid Centro<br />
* '''Tipo''': Prusa I2<br />
* '''Autor''': sbarrasCW (Sergio Barras)<br />
* '''Generación''': 3<br />
* '''Impresora progenitora:''' [http://www.reprap.org/wiki/Clone_wars:Impresora_Mardan Mardan]<br />
**'''Nacimiento:''' 01/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End:''' Budas Chino<br />
| <center>[[File:Oktopus.jpg|150px]]</center><br />
|---------<br />
|| <center>[[File:toxina.jpg|250px]]</center><br />
|<br />
* '''Clon #217''': '''<font color="#0000FF">TOXINA</font>'''<br />
* '''Modelo''': Prusa IT2<br />
* '''Autor''': Vicente Centeno [[User:Chentinox | (ChentinoX)]]<br />
* '''Lugar''': Cantabria<br />
* '''Impresora Progenitora''': [[ Toxic Grx]] <br />
* '''Nacimiento''': '''15/Abril/2013'''<br />
* '''Electrónica''': RAMPS 1_4<br />
* '''Firmware''': Sprinter <br />
* '''Extrusor''': Jonaskuehling extruder<br />
* '''Hot-End''': V5<br />
<br />
<br />
| <center> [[File:toxina_kit.jpg|250px]]</center><br />
|--------<br />
{{Template:CloneWars_clon|154|[http://www.reprap.org/wiki/Clone_wars:_Impresora_Wicket Wicket W. Warrick]|[http://www.reprap.org/wiki/Clone_wars:_Prusa Prusa Iteración 2]|3|21/Feb/2013|Juan Carlos Gavari Starkie|[http://www.reprap.org/wiki/Clone_wars:Impresora_Uterus Úterus]|Barcelona|[http://www.reprap.org/wiki/Clone_wars:_Impresora_Wiket W. Warrick MAS INFORMACION]|File:impresora2.jpg|File:150px-Wicket rotj.jpg}}<br />
|--------<br />
| <center>[[File:PortaBee-Grillo.jpg|200px]]</center> <br />
|* '''Clon #202''': '''<font color="#0000FF">Grillo</font>'''<br />
* '''Modelo''': PortaBee<br />
* '''Autor''': Miguel Herranz [Gredos]<br />
* '''Lugar''': Madrid (Vallecas)<br />
* '''Impresora progenitora''': [[Art-e-Facto]]<br />
* '''Nacimiento''': 25/04/2013<br />
* '''Electrónica''': Ramps 1.4 <br />
* '''Firmware''': Marlin<br />
* '''Hot-End''': J-Head MkV Chino<br />
* '''Juegos piezas:''' Antonio IB (Prusa I2, blanco) - Rubén Boluda (Prusa I2, blanco y negro)<br />
| <center>[[File:X-Wing.jpg|150px]]</center> <center></center><br />
|--------<br />
| <center></center> <br />
|* '''Clon #203''': '''<font color="#0000FF">Prusilio</font>'''<br />
* '''Modelo''': Prusa i2<br />
* '''Autor''': aliveandwell (Eduardo Dávila)<br />
* '''Lugar''': Tenerife<br />
* '''Nacimiento''': 20/06/2013<br />
* '''Electrónica''': Ramps 1.4 <br />
* '''Firmware''': Sprinter Superstable<br />
* '''Hot-End''': Farynozzle<br />
* '''Extrusor''': Jonaskuehling extruder<br />
| <center></center><center></center><br />
|---------<br />
| <center></center> <br />
|* '''Clon #237''': '''<font color="#0000FF">Caragolet de l'Oest</font>'''<br />
* '''Modelo''': Prusa i2<br />
* '''Autor''': Francesc Adell<br />
* '''Lugar''': Almenar (Lleida)<br />
* '''Impresora progenitora''': Desconocida<br />
* '''Nacimiento''': 17/7/2013<br />
* '''Electrónica''': Ramps 1.4 + Arduino Mega 2560 <br />
* '''Firmware''': R2R Sprinter<br />
* '''Extrusor''': Wade extruder<br />
| <center></center><center></center><br />
|---------<br />
| <center>[[File:000116.jpg]]</center><br />
|<br />
* '''Clon #228''': <font color="#0000FF">PROTEUS</font><br />
* '''Lugar''': Cuenca<br />
* '''Modelo''': (iteración 2)<br />
* '''Autor''': PlahuertaCW<br />
* '''Impresora progenitora''': Desconocida<br />
** '''Nacimiento''': 30/06/2013<br />
** '''Electrónica''': Arduino Mega + Ramps 1.4<br />
** '''Firmware''': Sprinter<br />
** '''Software''': Repetier-host+ Skeinforge<br />
** '''Extrusor''': Jonaskuehling<br />
** '''Hot-End''': Buda-style v1.2<br />
| <center>[[File:000117.jpg]]</center><br />
<br />
|---------<br />
| <center>[[File:Yavin.jpg|150px|Estado Actual]]</center><br />
|<br />
* '''Clon #243''': '''<font color="#0000FF">Yavin</font>'''<br />
* '''Lugar''': Motril (Granada)<br />
* '''Modelo''': Prusa Mendel (interación 2)<br />
* '''Autor''': [http://david.dantoine.org David Colmenero] (D_Skywalk)<br />
* '''Impresora progenitora''': [[Clone Wars: Impresora Nabla|Nabla]]<br />
** '''Nacimiento''': 05/07/2013<br />
** '''Electrónica''': Arduino Mega + Ramps 1.4<br />
** '''Firmware''': Marlin<br />
** '''Software''': Slic3r<br />
** '''Extrusor''': Jonaskuehling<br />
** '''Hot-End''': Budaschnozzle 2.0 (lulzbot)<br />
<br />
* '''[[Clone wars:Impresora Yavin|Más Información - Ficha]]'''<br />
<br />
| <center>[[File:YavinLogo.jpg|200px|Planeta Yavin 4]]</center><br />
|---------<br />
| <center>[[File:VinciBot_reloaded.JPG|220px]]</center><br />
|<br />
* '''Clon #226''': <font color="#0000FF">vinciBot reloaded</font><br />
* '''Lugar''': Málaga<br />
* '''Modelo''': Prusa iteration 3<br />
* '''Autores''': F. Malpartida (fm)<br />
* '''Impresora progenitora''': Uterus + vinciBot<br />
** '''Nacimiento''': 18/6/2013<br />
** '''Electrónica''': Clone Wars electronics [[http://reprap.org/wiki/SAV_MKI SAV MkI]]<br />
** '''Firmware''': Marlin<br />
** '''Extrusor''': Greg's Wade reloaded<br />
** '''Hot-End''': j-head MKV<br />
| <center>[[File:VinciDuinoTeam.gif|100px]]</center><br />
|--------<br />
| <center>[[File:printfles_3.jpg|200px]]</center> <br />
|<br />
* '''Clon #201''': <font color="#0000FF">Printfles</font><br />
* '''Lugar''': Madrid (Collado Villalba)<br />
* '''Modelo''': Prusa iteration 2<br />
* '''Autor''': Pablo Bosch [[User: Pifles]]<br />
* '''Impresora progenitora''': Desconocida<br />
** '''Nacimiento''': 28/04/2013<br />
** '''Electrónica''': Ramps 1.4 <br />
** '''Firmware''': Marlin<br />
** '''Extrusor''': Jonaskuehling<br />
** '''Hot-End''': Buda 2.0 Chino<br />
* '''[[Clone wars:Impresora Printfles|Más Información - Ficha]]'''<br />
| <center>[[File:printfles_4.jpg|150px]]</center> <br />
|---------<br />
|<center>[[File:PrusaI3.jpg|200px]]</center><br />
|<br />
* '''Clon #246''' : <font color="#0000FF"> LA ISLA 3D Prusa IT3</font><br />
* '''Lugar''' : San Fernando (Cádiz)'''<br />
* '''Familia''' : Mendel Prusa Iteración 3'''<br />
* '''Autor''': [[User:AcrespoCW | Abdón Crespo Sánchez (AcrespoCW)]] <br />
* '''Nacimiento''' : 11 de Agosto de 2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4 + Pololus<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Greg's Wade extruder for Prusa i3 by Misan<br />
* '''Hot-End''' : Buda style v1.2, boquilla: 0,5mm y 0,4mm<br />
* '''Primer juego de piezas completo para descendencia: 06/10/2013<br />
* '''[[Clone_Wars:_Impresora_LA_ISLA_3D|MÁS INFORMACIÓN]]<br />
|<center>[[File:PrusaI3.jpg|200px]]</center><br />
|---------<br />
|<center>[[File:ASPrusa-actualizada.jpg|200px]]</center> <br />
|<br />
* '''Clon #271''' : <font color="#0000FF"> ASPrusa</font><br />
* '''Lugar''' : Palencia'''<br />
* '''Familia''' : Mendel Prusa Iteración 2'''<br />
* '''Autor''': danielgap<br />
* '''Impresora progenitora''': [http://www.reprap.org/wiki/Clone_wars:Impresora_Mardan Mardan]<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4 + Pololus<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling<br />
* '''Hot-End''' : Buda style v1.2, boquilla: 0,5mm<br />
|<center>[[File:Asprusa.jpg|200px]]</center><br />
|---------<br />
|<center>[[File:e03.jpg|200px]]</center> <br />
|<br />
* '''Clon #303''' : <font color="#0000FF"> E03</font><br />
* '''Lugar''' : Vinaròs (Castellón)<br />
* '''Familia''' : Prusa i3<br />
* '''Autor''': Victor Moliner<br />
* '''Impresora progenitora''': #223 TelarBot<br />
* '''Nacimiento''' : 15/11/2013<br />
* '''Electrónica''': Mega 2560 + Ramps 1.4 <br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling<br />
* '''Hot-End''' : Catnozzle<br />
|<center></center><br />
|}<br />
<br />
=== Jedis ===<br />
<br />
* '''Descripción''': Clones terminados, que hayan impreso al menos una pieza<br />
* '''Para subir de categoría''': Imprimir un juego de piezas completo para montar otro clon<br />
<br />
{| class="wikitable" style="width:100%"<br />
|---<br />
|<center>[[File:Clon GLaDOS.jpg|200px|link=Clone wars:Impresora GLaDOS]]</center><br />
|<br />
* '''Clon #6''': '''[http://en.wikipedia.org/wiki/GLaDOS GLaDOS]'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': [http://reprap.org/wiki/RepStrap Repstrap]<br />
* '''Generación''': 1<br />
* '''Autor''': Miguel Ángel Herranz<br />
* Nacimiento: '''02/Feb/2012'''<br />
* [[Clone wars:Impresora GLaDOS|MÁS INFORMACIÓN]]<br />
|<center> [[File:Glados.png|150px|link=Clone wars:Impresora GLaDOS]]</center><br />
|---<br />
|<center>[[File:Clon-Sonny-1.png|220px|link=Clone wars:Impresora Sonny]]</center><br />
|<br />
* '''Clon #8''': '''<font color="#0000FF">Sonny</font>'''<br />
* '''Luegar''': Universidad Carlos III de Madrid<br />
* '''Familia''': [[Prusa_Mendel_(iteration_1)]] original modificada con piezas V2<br />
* '''Generación''': 1.5<br />
* '''Tipo de aguja''': 0.35 mm<br />
* '''Universidad Carlos III de Madrid'''<br />
* '''Autor''': [http://sites.google.com/site/danielgomezlendinez/ Daniel Gómez]<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:MADRE MADRE]<br />
* Nacimiento: '''7/Febrero/2012'''<br />
* [[Clone wars:Impresora Sonny|MÁS INFORMACIÓN]]<br />
|<center> [[File:Sonny-yo-robot1.png|200px]]</center><br />
|---<br />
|<center>[[File:Clon debugger 01-r1.jpg|220px|]]</center><br />
|<br />
* '''Clon #11''': '''<font color="#0000FF">Debugger</font>'''<br />
* '''Lugar''': <br />
* '''Familia''': <br />
* '''Generación''': 1<br />
* '''Autor''':<br />
* '''Impresora Progenitora''': Desconocida<br />
* Nacimiento: '''28/Feb/2012 '''<br />
* [[Clone wars:Impresora Debugger|MÁS INFORMACIÓN]]<br />
|<center> [[File:obsonet_v1b.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Fenix-bot final 03.JPG|200px|]]</center><br />
|<br />
* '''Clon #12''': '''<font color="#0000FF">Fenix-bot</font>'''<br />
* '''Lugar''': Burgos<br />
* '''Familia''': <br />
* '''Generación''': 1<br />
* '''Autor''': Raúl Barral<br />
* '''Impresora Progenitora''': Desconocida<br />
* Nacimiento: '''11/Marzo/2012'''<br />
* [[Clone wars:Impresora Fenix-bot|MÁS INFORMACIÓN]]<br />
|<center> [[File:phoenixcolorsmallvs1.jpg|150px]]</center><br />
|---<br />
|<center>[[File:ATAT.jpg|220px]]</center><br />
|<br />
* '''Clon #14''': '''<font color="#0000FF">AT-AT</font>'''<br />
* '''Lugar''': <br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original<br />
* '''Generación''': 1<br />
* '''Autor''': Xavier Tamarit<br />
* '''Impresora Progenitora''': Desconocida<br />
* Nacimiento: '''12/Abril/2012'''<br />
* [[Clone_wars:Impresora AT-AT|MÁS INFORMACIÓN]]<br />
|<center>[[File:At-at 23949NEG-2.jpg|200px]]</center><br />
|---<br />
|<center>[[File:Clon-18-han.png|200px]]</center> <br />
|<br />
* '''Clon #18''': '''<font color="#0000FF">Han</font>'''<br />
* '''Lugar''': Santa Bárbara (California, USA)<br />
* '''Familia''': Prusa iteración 2<br />
* '''Generación''': 2<br />
* Autor: [http://www.iearobotics.com/wiki/index.php?title=Andr%C3%A9s_Prieto-Moreno Andrés Prieto-Moreno Torres]<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel:_R2D2 R2]<br />
* '''Nacimiento''': 06/Mayo/2012 <br />
* [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_Han MAS INFORMACIÓN]<br />
|<center> [[File:Han solo.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Clon-22-Grifo-r1.jpg|200px]]</center> <br />
|<br />
* '''Clon #22''': '''<font color="#0000FF">Grifo</font>'''<br />
* '''Lugar''': Zamora <br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 1<br />
* Autores: <br />
** Abraham Alvaro Jimenez<br />
** Nerea Alvaro Santos (Mi Hija)<br />
* '''Impresora Progenitora''': Desconocida<br />
* '''Nacimiento''': 18/Mayo/2012<br />
* '''[[Clone_wars:Impresora Grifo|MÁS INFORMACIÓN]]<br />
|<center> [[File:grifo.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Impresora Lucy 2 Junio 2012.jpg|200px|]]</center><br />
|<br />
* '''Clon #24''': '''<font color="#0000FF">Lucy</font>'''<br />
* '''Lugar''': Universidad Autónoma de Madrid<br />
* '''Familia''': [http://www.iearobotics.com/wiki/index.php?title=Clone_wars:_Printrbot Printrbot]<br />
* '''Generación''': 2<br />
* '''Autor''': Carlos García Saura<br />
* '''Impresora Progenitora''': [[Clone wars:Impresora Halcón Milenario|Halcón Milenario]]<br />
* '''Nacimiento''': 01/Jun/2012<br />
* '''[[Clone wars:Impresora Lucy|MAS INFORMACIÓN]]'''<br />
|<center> [[File:Lucy.jpg|100px|]]</center><br />
|---<br />
|<center>[[File:Clon-25-Tiefighter.jpg|150px]]</center> <br />
|<br />
* '''Clon #25''': '''<font color="#0000FF">TIE Fighter</font>'''<br />
* TIE Fighters Squadron (Mother Ship: DeathStar)<br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa Mendel Iteracion 2<br />
* '''Generación''': 2<br />
* '''Autor''': Fernando Salceda (klonando)<br />
* '''Impresora Progenitora''': [[Clone wars:Impresora Death Star|Deathstar]]<br />
* '''Nacimiento''': 11/Jun/2012<br />
* [[Clone wars:_TIEFighter|MÁS INFORMACIÓN]]<br />
|<center> [[File:tiefighter.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Clon-27-SHODAN.png|200px]]</center> <br />
|<br />
* '''Clon #27''': '''<font color="#0000FF">SHODAN</font>'''<br />
* '''Lugar''': Universidad Politécnica de Madrid<br />
* '''Familia''': [[Prusa_Mendel_%28iteration_2%29|Prusa Iteración 2]]<br />
* '''Generación''': 3<br />
* '''Autor''': Jaime García (elgambitero)<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R3 R3]<br />
* '''Nacimiento''': 17/Jun/2012<br />
* [[Clone wars: Impresora SHODAN|MÁS INFORMACIÓN]]<br />
|<center> [[File:SHODAN.jpeg|150px]]</center><br />
|---<br />
|<center>[[File:Clon-28-Dedalo.jpg|200px]]</center> <br />
|<br />
* '''Clon #28''': '''<font color="#0000FF">Dédalo</font>'''<br />
* '''Lugar''': Universidad Carlos III de Madrid<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 1<br />
* '''Autor''': David Estévez (aka [http://www.thingiverse.com/DEF DEF])<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:PADRE PADRE]<br />
* '''Nacimiento''': 19/Jun/2012<br />
* [[Clone wars: Impresora Dédadlo|MÁS INFORMACIÓN]]<br />
|<center> [[File:daedalus_profile.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Clon-31-Prusa-popoulus.jpg|200px]]</center> <br />
|<br />
* '''Clon #31''': '''<font color="#0000FF">Prusa-Popoulus</font>'''<br />
* Lugar: Grecia<br />
* Familia: Prusa Mendel Iteration 2<br />
* Generación: 3<br />
* Impresora Progenitora: [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R3 R3]<br />
* Autor: Stathis Fotiadis<br />
* '''Nacimiento''': 30/Jun/2012<br />
* [[Clone wars:Impresora Prusa-popoulus|MÁS INFORMACIÓN]]<br />
|<center> [[File:Prusa-popoulus-logo.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Clon-33-P1.png|200px]]</center> <br />
|<br />
* '''Clon #33''': '''<font color="#0000FF">P1</font>'''<br />
* Lugar: Universidad Politécnica de Madrid<br />
* Familia: Printrbot original<br />
* Generación: 2<br />
* Impresora Progenitora: Granja de PrintrBot HQ<br />
* Autor: [http://www.iearobotics.com/wiki/index.php?title=Juan_Gonzalez:Main Juan González-Gómez] (Obijuan)<br />
* '''Nacimiento''': 11/Jul/2012<br />
* [http://www.iearobotics.com/wiki/index.php?title=Printerbot:_P1 MAS INFORMACION]<br />
|<center> [[File:P1.png|150px]]</center><br />
|---<br />
|<center>[[File:Clon-34-Marvin.png|200px]]</center> <br />
|<br />
* '''Clon #34''': '''<font color="#0000FF">Marvin</font>'''<br />
* Lugar: Universidad Carlos III de Madrid<br />
* Familia: Prusa Aire 2<br />
* Generación: 2<br />
* Impresora Progenitora: [[Clone wars:Impresora Mardan|Mardan]]<br />
* Autor: Martin Fodstad Stoelen<br />
* '''Nacimiento''': 12/Jul/2012<br />
* [[Proyecto:MAS INFORMACION|MAS INFORMACION]]<br />
|<center> [[File:marvin.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Clon-35-jP.jpg|200px]]</center> <br />
|<br />
* '''Clon #35''': '''<font color="#0000FF">jπ;</font>'''<br />
* Lugar: Universidad Carlos III de Madrid<br />
* Familia: Prusa Aire 2<br />
* Generación: 2<br />
* Impresora Progenitora: [[Clone wars:Impresora Maese Artorius|Maese Artorius]]<br />
* Autor: Itziar Lima Ramos y Juan Pablo Rodríguez García <br />
* '''Nacimiento''': 15/Jul/2012<br />
* [[Proyecto:MAS INFORMACION|MAS INFORMACION]]<br />
|<center> [[File:Jpi.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Clon37-wendy.jpg|200px]]</center><br />
|<br />
*'''Clon #37''': '''<font color="#0000FF">Wendy</font>'''<br />
* Tipo: Prusa Air 2<br />
* Progenitora: Padre y Madre<br />
* Autor: Nieves Cubo (Nicuma)<br />
* Lugar: Universidad Carlos III de Madrid<br />
* '''Nacimiento''': 03/Agosto/2012<br />
* [[Clone wars:Impresora Wendy|MAS INFORMACIÓN]]<br />
|<center> [[File:Wendy printer.jpg]]</center><br />
|---<br />
|<center>[[File:Abe.jpg|200px]]</center><br />
|<br />
*'''Clon #38''': '''<font color="#0000FF">Abe</font>'''<br />
*''' Tipo''': Prusa Iteracion 2<br />
*'''Progenitora''': [http://fidelfraga.eu/content/impresora-3d Guaifi]<br />
*'''Autor''': Javier Rebollo (Jarec)<br />
*'''Lugar''': Alcala de Guadaira (Sevilla)<br />
* '''Nacimiento''': 11/Agosto/2012<br />
|<center> [[File:Abe's.png|200px]]</center><br />
|---<br />
|<center>[[File:Clon-40-gallia-canarnova.jpg|150px]]</center><br />
|<br />
*'''Clon #40''': '''<font color="#0000FF">Gallia</font>'''<br />
*''' Tipo''': Prusa Iteracion 2<br />
*'''Progenitora''': Madalena<br />
*'''Autor''': Enrique Zanardi<br />
*'''Lugar''': Tenerife<br />
* '''Nacimiento''': 25/Agosto/2012<br />
|<center> [[File:Gallia-logo.jpg|200px]]</center><br />
|---<br />
|<center>[[File:Clon-45-PrusaHowarto.jpg|200px]]</center> <br />
|<br />
* '''Clon #45''': '''<font color="#0000FF">Arquímedes</font>'''<br />
* '''Lugar''': Ibiza<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 3<br />
* '''Autor''': Diego Lao (Howarto)<br />
* '''Impresora Progenitora''': [[Clone wars:Impresora Mardan|Mardan]]<br />
* '''Nacimiento''': 6/9/2012 (acabada)<br />
* [[Clone wars: Impresora Por ahora sin nombre|MÁS INFORMACIÓN]]<br />
|<center> [[File:HowartoAvatar.png|150px]]</center><br />
|---<br />
|<center>[[File:Clon-50-C3po.jpg|200px]]</center> <br />
|<br />
* '''Clon #50''': [[Clone_Wars:_C3PO|'''C3PO''']]<br />
* Lugar: '''Madrid'''<br />
* Tipo: Hibrido PrintrBot-Larabot<br />
* Autor: Alvaro Lara<br />
* Impresora progenitora: Manuela<br />
* Nacimiento: 17 de Septiembre de 2012 <br />
|<center> [[File:C3po doblado.jpg|200px]]</center><br />
|---<br />
|<center>[[File:Clon-54-eve.png|200px]]</center><br />
|<br />
* '''Clon #54''': '''<font color="#0000FF">EVE (Nº6)</font>'''<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 2<br />
* '''Autor''': [http://www.mbrobotics.es/MbRobotics/Main.html MABLACK (Miguel Angel Berna Alberola)]<br />
* '''Impresora Progenitora''': [http://www.mbrobotics.es/Wiki/index.php?title=JOHNNY5 JOHNNY5] <br />
* '''Electrónica''': [http://reprap.org/wiki/Sanguinololu Sanguinololu]<br />
* '''Firmware''': [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Extrusor''': [http://reprap.org/wiki/Wade%27s_Geared_Extruder Wade's extruder] (plástico de 3mm)<br />
* '''Hot-End''': [http://reprap.org/wiki/J_Head_Nozzle J-Head Mk IV-B]<br />
* Nacimiento: '''09/Octubre/2012'''<br />
|<center>[[File:Eve.png|200px]]</center><br />
|---<br />
|<center>[[File:Clone-56-la-cosa.jpg|220px]]</center><br />
|<br />
* '''Clon #56''': '''<font color="#0000FF">La cosa</font>'''<br />
* '''Lugar''': Universidad Carlos III de Madrid<br />
* '''Familia''': Prusa Air 2<br />
* '''Generación''': 2<br />
* '''Autor''': Jorge Rodríguez Marín<br />
* '''Impresora Progenitora''': [[Impresora Progenitora: Demiurgo|Demiurgo]] y [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]]<br />
* '''Nacimiento''': '''30/Septiembre/2012''' a las 12:00<br />
* [[Impresora: la cosa|MÁS INFORMACIÓN]]<br />
|<center>[[File:La-Cosa.png]]</center><br />
|---<br />
|<center>[[File:Clone-57-Unicorn.jpg|220px]]</center><br />
|<br />
* '''Clon #57''': '''<font color="#0000FF">Unicorn</font>'''<br />
* '''Lugar''': Universidad Carlos III de Madrid<br />
* '''Familia''': Prusa Air 2<br />
* '''Generación''': 2<br />
* '''Autor''': [http://roboticslab.uc3m.es/roboticslab/persona.php?id_pers=72 Juan G. Victores]<br />
* '''Impresora Progenitora''': [[Impresora Progenitora: Demiurgo|Demiurgo]] y [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]]<br />
* '''Nacimiento''': '''20/Octubre/2012''' a las 23:00<br />
* [[Impresora: unicorn|MÁS INFORMACIÓN]]<br />
|<center>[[File:Clone-57-Unicorn-logo.png|180px]]</center><br />
|---<br />
|<center>[[File:Clon-59-JJmachine.png|220px]]</center><br />
|<br />
* '''Clon #59''': '''<font color="#0000FF">JJMachine</font>'''<br />
* '''Lugar''': Málaga<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 2<br />
* '''Autor''': JgemezCW y Jimmmenez<br />
* '''Impresora Progenitora''': Daneel 3-law<br />
* '''Nacimiento''': '''20/Octubre/2012''' a las 12:00<br />
* [MÁS INFORMACIÓN]<br />
|<center> [[File:JJlogo.png|180px]] </center><br />
|---<br />
|<center>[[File:Dolly_18_Todo_Montado.JPG|220px]]</center><br />
|<br />
* '''Clon #60''': '''<font color="#0000FF">Dolly</font>'''<br />
* '''Lugar''': Alicante<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 3<br />
* '''Autores''': J. Sevila, S. Ors<br />
* '''Impresora progenitora''': The Clon UA<br />
* '''Nacimiento''': '''29/Octubre/2012''' a las 21:00<br />
* '''Electrónica''': [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware''': [https://github.com/ErikZalm/Marlin Marlin]<br />
* '''Extrusor''': Jonaskuehling (plástico de 3mm)<br />
* '''Hot-End''': [http://reprap.org/wiki/J_Head_Nozzle#Mk_IV J Head Nozzle Mk IV]<br />
* [[Clone_wars:_Impresora_Dolly|MÁS INFORMACIÓN]]<br />
|<center>[[File:DollyLogo_clean2.png|180px]]</center><br />
|---<br />
|<center>[[File:Clon-61-conguito3d.jpg|220px]]</center><br />
|<br />
* '''Clon #61''': '''<font color="#0000FF">Conguito3D</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 2<br />
* '''Autores''': DDREAM<br />
* '''Impresora progenitora''': [http://www.mbrobotics.es/Wiki/index.php?title=JOHNNY5 JOHNNY5]<br />
* '''Nacimiento''': 25/Oct/2012<br />
* [[Clone wars: Impresora Conguito3D|MÁS INFORMACIÓN]]<br />
|<center>[[File:Conguito3D-logo.png|180px]]</center><br />
|---<br />
|<center>[[File:Clone-62-Hefesto.jpg|220px]]</center><br />
|<br />
* '''Clon #62''': '''<font color="#0000FF">Hefesto</font>'''<br />
* '''Lugar''': Madrid (UC3M)<br />
* '''Familia''': Prusa Air 2<br />
* '''Generación''': 2<br />
* '''Autores''': Fernando Cerezal (y los miembros de Clone Wars)<br />
* '''Impresora progenitora''': [[Impresora Progenitora: Demiurgo|Demiurgo]] y [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]]<br />
* '''Nacimiento''': '''31/Octubre/2012''' a la 1:30<br />
* [[Clone wars: Impresora Hefesto|MÁS INFORMACIÓN]]<br />
|<center>[[File:logoHefesto.jpg|180px]]</center><br />
|---<br />
|<center>[[File:Clon-64-Ironhide.jpg|200px|]]</center> <br />
|<br />
* '''Clon #64 ''': Irohide<br />
* '''Lugar''': Badajoz<br />
* '''Familia''': Prusa Mendel<br />
* '''Generación''': <br />
* '''Autor''': Ismael De Migel Cantero<br />
* '''Impresora progenitora''': Daneel-3-law<br />
* Nacimiento: '''26/10/2012'''<br />
* [http://imc9.blogspot.com.es/p/impresora-3d.html MÁS INFORMACIÓN]<br />
|<center>[[File:Ironhide.jpg|200px|]]</center> <br />
|---<br />
|<center>[[File:Orange_Juice.jpg|200px]]</center> <br />
|<br />
* '''Clon #65 ''': <font color="#0000FF">Orange Juice</font><br />
* '''Lugar''': Barcelona<br />
* '''Familia''': Prusa Iteracion 2 con extras:Estabilizador Z y LCD<br />
* '''Autor''': David F.<br />
* '''Impresora progenitora''': Desconocida<br />
* Nacimiento: '''2/11/2012'''<br />
|<center>[[File:Freshorange.jpg|100px]]</center> <br />
|---<br />
|<center>[[File:Clon-66-Nexus-6.jpg|250px]]</center> <br />
|<br />
* '''Clon #66 ''': <font color="#0000FF">Nexus 6</font><br />
* '''Lugar''': A Coruña<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Autor''': Milo Barral<br />
* '''Impresora progenitora''': Johnny 5<br />
* '''Nacimiento''': 03/11/2012<br />
|<center>[[File:Nexus-6-Replicants.jpg|200px]]</center> <br />
|---<br />
|<center>[[File:Clon-67-T-800.jpg|200px]]</center> <br />
|<br />
* '''Clon #67 ''': <font color="#0000FF">T-800</font><br />
* '''Lugar''': UC3M<br />
* '''Familia''': Prusa Air-2<br />
* '''Autor''': Antonio Castro Gómez<br />
* '''Impresora progenitora''': [[Impresora Progenitora: Demiurgo|Demiurgo]] y [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]]<br />
* '''Nacimiento''': 29/10/2012<br />
|<center>[[File:Terminator4.jpg|200px]]</center> <br />
|---<br />
|<center>[[File:Clon-68-Lolita.jpg|200px]]</center> <br />
|<br />
* '''Clon #68 ''': <font color="#0000FF">Lolita</font><br />
* '''Lugar''': UC3M<br />
* '''Familia''': Prusa Air-2<br />
* '''Autores''': David Cabrera Rodríguez y Patricia Alba Talaverano<br />
* '''Impresora progenitora''': [[Impresora Progenitora: Demiurgo|Demiurgo]] y [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]]<br />
* '''Nacimiento''': 04/11/2012<br />
|<center>[[File:Lolita-logo.png|200px]]</center> <br />
|---<br />
|<center>[[File:ReciClon.jpg|250px]]</center> <br />
|<br />
* '''Clon #69 ''': <font color="#0000FF">ReciClon</font><br />
* '''Lugar''': Sevilla<br />
* '''Familia''': Prusa Iteracion 2<br />
* '''Autor''': Antonio Escudero<br />
* '''Impresora progenitora''': Mardan<br />
* '''Nacimiento''': 05/11/2012<br />
|<center>[[File:recicle.jpg|250px]]</center> <br />
|---<br />
|<center>[[File:Clone-70-restaun3D.jpg|250px]]</center> <br />
|<br />
* '''Clon #70 ''': <font color="#0000FF">Restaun3D</font><br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': Prusa Iteracion 2<br />
* '''Autor''': Roberto Estaun Gil<br />
* '''Impresora progenitora''': x-wing<br />
* '''Nacimiento''': 09/Nov/2012<br />
|<center>[[File:Cjuan01.jpg|250px]]</center> <br />
|---<br />
|<center>[[File:Clon-72-terpsicore.jpg|250px]]</center> <br />
|<br />
* '''Clon #72''': <font color="#0000FF">Terpsícore (<font color="#00FF00">R.I.P</font>)</font><br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': [http://reprap.org/wiki/RepRapPro_Huxley/es RepRapPro Huxley]<br />
* '''Autor''': algspd (Javier Briz)<br />
* '''Impresora progenitora''': Daneel 3-law<br />
* '''Nacimiento''': 11/Nov/2012<br />
* [[Clone_wars:Impresora_Terpsicore|Mas información]]<br />
|<center>[[File:logo_impresora_terpsicore.jpeg|150px]]</center> <br />
|---<br />
|<center>[[File:Clon-73-bender-doblador-rodriguez.jpg|200px]]</center> <br />
|<br />
* '''Clon #73''': <font color="#0000FF">Bender Doblador Rodríguez</font><br />
* '''Lugar''': Santa Cruz de Tenerife<br />
* '''Familia''': Printrbot<br />
* '''Autor''': Julián García Roger<br />
* '''Impresora progenitora''': Desconocida<br />
* '''Nacimiento''': 10/Nov/2012<br />
* [[Clone_wars:Impresora_Bender_doblador_rodríguez|Mas información]]<br />
|<center>[[File:Bender Baby.jpg|150px]]</center> <br />
|---<br />
|<center>[[File:Clone-76-Arturo.jpg|200px]]</center> <br />
|<br />
* '''Clon #76''': <font color="#0000FF">Arturo</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Autor''': Daniel Vallejo Hernando<br />
* '''Impresora progenitora''': 3D-Prisa<br />
* '''Nacimiento''': 20/Nov/2012<br />
* [[Clone Wars:Impresora Arturo|MÁS INFORMACIÓN]]<br />
|<center>[[File:Clon-76-arturo-logo.png | 150px]]</center> <br />
|---<br />
|<center>[[File:Clone-77-alcar.jpg|200px]]</center> <br />
|<br />
* '''Clon #77''': <font color="#0000FF">Alcar</font><br />
* '''Lugar''': Barcelona<br />
* '''Familia''': <br />
* '''Autor''': Jose Sanchez Sanchez<br />
* '''Impresora progenitora''': Manuela<br />
* '''Nacimiento''': 25/Nov/2012<br />
|<center>[[File:Alcar-logo.png | 200px]]</center> <br />
|---<br />
|<center>[[File:Clon-78-Kubrick.jpg|200px]]</center> <br />
|<br />
* '''Clon #78''': <font color="#0000FF">Kubrick</font><br />
* '''Lugar''': Buenos Aires, Argentina<br />
* '''Familia''': Printrbot V2<br />
* '''Autor''': Javier Marquevichi<br />
* '''Impresora progenitora''': Úterus<br />
* '''Nacimiento''': 20/Nov/2012<br />
* [[Clone Wars: Impresora Kubrick|MÁS INFORMACIÓN]]<br />
|<center>[[File:Kubrick-logo.png | 200px]]</center> <br />
|---<br />
|<center>[[File:Clone-80-VirPrusa.jpg|200px]]</center> <br />
|<br />
* '''Clon #80''': <font color="#0000FF">VirPrusa</font><br />
* '''Lugar''': Dos Hermanas, Sevilla <br />
* '''Familia''': Prusa i2<br />
* '''Autor''': Francisco Montero<br />
* '''Impresora progenitora''': Michaelmas<br />
* '''Nacimiento''': 29/Nov/2012<br />
* [[Clone Wars: Impresora VirPrusa|MÁS INFORMACIÓN]]<br />
|<center>[[File:VirPrusa-logo-defecto.png | 200px]]</center><br />
|---<br />
|<center>[[File:Clon 81 Neutronium.jpg|200px]]</center><br />
|<br />
* '''Clon #81''': <font color="#0000FF">Neutronium</font><br />
* '''Lugar''': DLabs Zaragoza<br />
* '''Familia''': Prusa Iteracion 2<br />
* '''Autor''': Degenerated Labs<br />
* '''Impresora progenitora''': [[Clone_wars:Impresora_Daneel_3-law|Daneel 3-LAW]]<br />
* '''Nacimiento''': 6/Oct/2012<br />
|<center>[[File:Neutronium-logo.png|200px]]</center><br />
|---<br />
|<center>[[File:Clon-82-odomatic.jpg|200px]]</center> <br />
|<br />
* '''Clon #82''': <font color="#0000FF">od-O-matic</font><br />
* '''Lugar''': Albacete<br />
* '''Familia''': Prusa Air 2<br />
* '''Autor''': Ricardo Monsalve<br />
* '''Impresora progenitora''': leapy<br />
* '''Nacimiento''': 2/Dic/2012<br />
|<center>[[File:Odomatic-logo.png|200px]]</center><br />
|---<br />
|<center>[[File:Clon-83-droide-de-protocolo.jpg|200px]]</center> <br />
|<br />
* '''Clon #83''': <font color="#0000FF">Droide de Protocolo</font><br />
* '''Lugar''': [http://www.aerobot.org.es AEROBOT Club de Robótica], ETS Ingenieros Aeronáuticos, UPM<br />
* '''Familia''': Prusa 2<br />
* '''Responsable''': [http://madebyfrutos.wordpress.com/ Miguel Ángel de Frutos]<br />
* '''Impresora progenitora''': R2D2<br />
* '''Nacimiento''': 3/Dic/2012<br />
|<center>[[File:Logo_Aerobot.png|150px]]</center><br />
|---<br />
|<center>[[File:Clon-84-Acrylic3.jpg|200px]]</center> <br />
|<br />
* '''Clon #84''': <font color="#0000FF">Acrylic3</font><br />
* '''Lugar''': Valencia<br />
* '''Familia''': Prusa i3<br />
* '''Autor''': Miguel Sánchez (Misan)<br />
* '''Impresora progenitora''': Ukraine<br />
* '''Nacimiento''': 01/Dic/2012<br />
|<center>[[File:Photo.jpg|200px]]</center><br />
|---<br />
|<center>[[File:Clon-85-Maniotas.jpg|200px]]</center> <br />
|<br />
* '''Clon #85''': <font color="#0000FF">Maniotas</font><br />
* '''Lugar''': Vigo<br />
* '''Familia''': Prusa i2<br />
* '''Autor''': Pablo Martínez & Rita López <br />
* '''Impresora progenitora''': R2-Reloaded<br />
* '''Nacimiento''': 3/Dic/2012<br />
|<center>[[File:Maniotas.jpg|200px]]</center><br />
|---<br />
|<center>[[File:Clon-86-Machado.jpg|200px]]</center> <br />
|<br />
* '''Clon #86''': <font color="#0000FF">Machado</font><br />
* '''Lugar''': Pulpí, Almería<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 2<br />
* '''Autor''': Ramón López<br />
* '''Impresora progenitora''': Jhonny5 <br />
* '''Nacimiento''': 4/Dic/2012<br />
|<center>[[File:machado2.jpg|200px]]</center><br />
|---<br />
|<center>[[File:Clon-87-Roi.jpg|200px]]</center> <br />
|<br />
* '''Clon #87''': '''<font color="#0000FF">Roi</font>'''<br />
* '''Lugar''': CAEND (Arganda del Rey, Madrid)<br />
* '''Familia''': Prusa 2 con alguna pieza metálica mecanizada<br />
* '''Generación''': 3<br />
* '''Autor''': Juan Carlos Liébana (CAPI)<br />
* '''Nacimiento''': 4/Dic/2012<br />
* '''Impresora progenitora''': [http://reprap.org/wiki/Clone_Wars:_Othon Othon]<br />
* [[Clone_Wars:_Roi|'''MÁS INFORMACIÓN''']]<br />
|<center> [[File:LOGO-ROI2.png|200px]]</center><br />
|---<br />
|<center>[[File:Clon-88-Leapy.png|200px]]</center> <br />
|<br />
* '''Clon #88''': '''<font color="#0000FF">Leapy</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa Air 2<br />
* '''Generación''': 1<br />
* '''Autor''': LeapTo3D<br />
* '''Nacimiento''': 6/Oct/2012<br />
* '''Impresora progenitora''': Demiurgo<br />
* [[Clone Wars: Leapy|'''MÁS INFORMACIÓN''']]<br />
|<center> [[File:Leapy-logo.png|200px]]</center><br />
|---<br />
|<center> [[File:Clon-89-Alfa3p.jpg|200px]]</center><br />
|<br />
* '''Clon #89''': '''<font color="#0000FF">alfa 3P</font>'''<br />
* Lugar: Vigo, Galicia<br />
* '''Familia''': Prusa iteration 2 con mejoras de piezas<br />
* '''Generación''': 4<br />
* '''Autor''': [https://twitter.com/alexalfaya Alejandro Alfaya],[https://plus.google.com/u/0/117476712378301252435/posts Angel Gómez], [https://twitter.com/sdaf2 Alejandro Valiñas]<br />
* '''Impresora progenitora''': <font color="#0000FF">Laura Palmer</font><br />
* '''Nacimiento''': 6 Diciembre de 2012<br />
|<center> [[File:Logoalfa3P.jpg|150px]]</center><br />
<br />
{{Template:CloneWars_clon|90|Ester Píscole|Prusa Iteracion 3|3|6/Dic/2012|algspd (Javier Briz)|Daneel 3-law|Universidad de Zaragoza|Clone_wars:Impresora_EsterPiscole|File:Clon-90-esterpiscole.jpg|File:Logo_pulsar.png}}<br />
<br />
|----------<br />
| <center>[[File:Clon-91-Babbage.jpg|250px]]</center><br />
|<br />
* '''Clon #91''': <font color="#0000FF">Babbage</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Huxley<br />
* '''Autor''': Syvic<br />
* '''Impresora progenitora''': Desconocido (RepRapPro)<br />
* '''Nacimiento''': Algún día de Noviembre de 2012<br />
* [[Mas información]]<br />
| | <center>[[File:Charles-babbage-analytical-engine-model.jpg|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon-92-The-orange-printwork.jpg|250px]]</center><br />
|<br />
* '''Clon #92''': <font color="#0000FF">The Orange PrintWork</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa i2<br />
* '''Autor''': Iker Etxarte<br />
* '''Impresora progenitora''': 3D-Prisa<br />
* '''Nacimiento''': 09-Dic-2012<br />
* [[Mas información]]<br />
| | <center>[[File:The orange printwork logo.png|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon-93-Impresori.jpg|250px]]</center><br />
|<br />
* '''Clon #93''': <font color="#0000FF">Impresori</font><br />
* '''Lugar''': Palma de Mallorca<br />
* '''Familia''': Prusa i2<br />
* '''Generación'': 2<br />
* '''Autor''': Sasori Olkof <br />
* '''Impresora progenitora''': PacleMaker<br />
* '''Nacimiento''': 09-Dic-2012<br />
* [[Mas información]]<br />
| | <center>[[File:saso.jpg|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon-94-Moebius.jpg|250px]]</center><br />
|<br />
* '''Clon #94''': <font color="#0000FF">Moebius</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Generación'': 2<br />
* '''Autor''': Luis Macías<br />
* '''Impresora progenitora''': Úterus<br />
* '''Nacimiento''': 11-Dic-2012<br />
* [[Clone wars Impresora Moebius|Mas información]]<br />
| | <center>[[File:LogoMoebius.jpg|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon-95-litris-3D.png|250px]]</center><br />
|<br />
* '''Clon #95''': <font color="#0000FF">Litris 3D</font><br />
* '''Lugar''': Alicante<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Generación''': 2<br />
* '''Autor''': Salvador Lario<br />
* '''Impresora progenitora''': Mardan<br />
* '''Nacimiento''': 12-Dic-2012<br />
* [[Mas información]]<br />
| | <center>[[File:Litris3D logo.png|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon-96-Aitor.jpg|200px]]</center><br />
|<br />
* '''Clon #96''': <font color="#0000FF">Aitor</font><br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': Printrbot<br />
* '''Generación''': 4<br />
* '''Autor''': Aitor Hernández<br />
* '''Impresora progenitora''': Geek-X-truder<br />
* '''Nacimiento''': 16-Nov-2012<br />
* [[CloneWars: Impresora Aitor|Mas información]]<br />
| | <center>[[File:Aitor avatar.jpg|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon 97 Casillas 75.jpg|200px]]</center><br />
|<br />
* '''Clon #97''': <font color="#0000FF">Casillas 75</font><br />
* '''Lugar''': Casillas (Ávila)<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 2<br />
* '''Autor''': Borja Segovia<br />
* '''Impresora progenitora''': Plumabot y 3D-Prisa<br />
* '''Nacimiento''': 16/Dic/2012<br />
* [[Clonewars: Impresora Casillas 75|Mas información]]<br />
| | <center>[[File:Casillas-97-logo.png|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon 98 mama bot.png|250px]]</center><br />
|<br />
* '''Clon #98''': <font color="#0000FF">Mamabot</font><br />
* '''Lugar''': <br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 4<br />
* '''Autor''': Marcos Castillo<br />
* '''Impresora progenitora''': Geek-X-truder<br />
* '''Nacimiento''': 16/Dic/2012<br />
* [[Clone Wars: Papa quiero un robot: Mamabot|Mas información]]<br />
| | <center>[[File:Mamabot.jpg|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon-99-lucas-clon.jpg|250px]]</center><br />
|<br />
* '''Clon #99''': <font color="#0000FF">Lucas Clon</font><br />
* '''Lugar''': Salamanca<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 4<br />
* '''Autor''': Antonio J. Lucas<br />
* '''Impresora progenitora''': Y-wing<br />
* '''Nacimiento''': 14/Dic/2012<br />
* [[Mas información]]<br />
| | <center>[[File:Lucas clon logo.png|250px]]</center> <br />
|----------<br />
| <center>[[File:Clone 100 ANYA.jpg|250px]]</center><br />
|<br />
* '''Clon #100''': <font color="#0000FF">ANYA</font><br />
* '''Lugar''': Alicante<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 3<br />
* '''Autor''': Jose Luis Martinez<br />
* '''Impresora progenitora''': Jhonny 5<br />
* '''Nacimiento''': Nov/2012<br />
* [[Mas información]]<br />
| <center>[[File:Logo-ANYA.jpg|250px]]</center> <br />
|----------<br />
| <center>[[File:Clon 100 2 aFroman-3D.jpg|250px]]</center><br />
En árbol<br />
|<br />
* '''Clon #100.02''': <font color="#0000FF">aFroman-3D</font><br />
* '''Lugar''': Getafe (Madrid)<br />
* '''Familia''': Printrbot v2<br />
* '''Generación''': 2<br />
* '''Autor''': Agustín Fernández (AromanCW)<br />
* '''Impresora progenitora''': 3D-GDAF<br />
* '''Nacimiento''': 19/Dic/2012<br />
* [[Clone_wars:_aFroman-3D | Mas información]]<br />
| <center>[[File:AFroman-3D-logo.png|250px]]</center> <br />
|----------<br />
| <center>[[File:Clon 100 03 Estherterrestre.jpg|250px]]</center><br />
En árbol<br />
|<br />
* '''Clon #100.03''': <font color="#0000FF">Estherterrestre</font><br />
* '''Lugar''': Asturias<br />
* '''Familia''': Printrbot v2 métrica<br />
* '''Generación''': 2<br />
* '''Autor''': Angel<br />
* '''Impresora progenitora''': [[Clone_wars:_Impresora_Potato | Potato]]<br />
* '''Nacimiento''': 19/Dic/2012<br />
* [[ Mas información]]<br />
| <center>[[File:Estherterrestre-logo.png|250px]]</center> <br />
|----------<br />
| <center>[[File:Clon-100.04-stitch.jpg|250px]]</center><br />
* En árbol<br />
|<br />
* '''Clon #100.04''': <font color="#0000FF">Stitch</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Printrbot v2 métrica<br />
* '''Generación''': 2<br />
* '''Autor''': Santiago Lopez<br />
* '''Impresora progenitora''': [[Clone_wars:_Impresora_Potato | Potato]]<br />
* '''Nacimiento''': 20/Dic/2012<br />
* [[ Mas información]]<br />
| <center>[[file:Stitch.png]]</center> <br />
|----------<br />
| <center>[[File:Clon-100.05-Cerberus.jpg|250px]]</center><br />
* En árbol<br />
|<br />
* '''Clon #100.05''': <font color="#0000FF">Cerberus</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 2<br />
* '''Autor''': Carlos Medina Moreno<br />
* '''Impresora progenitora''': 3D-Prisa<br />
* '''Nacimiento''': 21/Dic/2012<br />
* [[ |Mas información]]<br />
| <center>[[File:Logo cerberus.png|250px]]</center> <br />
|----------<br />
| <center>[[File:Clone-108-Lexmark printer.png|250px]]</center><br />
* En árbol<br />
|<br />
* '''Clon #100.08''': <font color="#0000FF">lexmark hijo de Gandalf</font><br />
* '''Lugar''': Martorell bcn<br />
* '''Familia''': prusa Iteration 2<br />
* '''Generación''': 2<br />
* '''Autor''':alex jimenez <br />
* '''Impresora progenitora''': Gandalf<br />
* '''Nacimiento''':15/dic/2012 <br />
<br />
| <center>[[File:Avatar_lexmark.jpg|250px]]</center><br />
|----------<br />
| <center>[[File:Grecobot.JPG|250px]]</center><br />
*Asignado: ok<br />
|<br />
* '''Clon #100.09''': <font color="#0000FF">Grecobot</font><br />
* '''Lugar''': Toledo (IES El Greco)<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 4<br />
* '''Autor''': César Rangil<br />
* '''Impresora progenitora''': Y-wing<br />
* '''Nacimiento''':25/dic/2012 <br />
|<center>[[File:logogrecobot.svg|250px]]</center><br />
|----------<br />
| <center>[[File:PENDIENTE.JPG|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #100.10''': <font color="#0000FF">Benlliure</font><br />
* '''Lugar''': Guadalajara<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 3<br />
* '''Autor''': Jose Antonio Quevedo Muñoz<br />
* '''Impresora progenitora''': Úterus<br />
* '''Nacimiento''':27/dic/2012 <br />
|<center>[[250px]]</center><br />
|----------<br />
| <center>[[File:CWMagrathea.JPG|250px]]</center><br />
*Asignado: ok<br />
|<br />
* '''Clon #100.11''': <font color="#0000FF">Magrathea</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': [http://www.reprap.org/wiki/Clone_wars:_Prusa_iteraci%C3%B3n_3 Prusa Iteración 3]<br />
* '''Generación''': X<br />
* '''Autor''': Mario Camou<br />
* '''Impresora progenitora''': Kit de [http://www.reprapsource.com RepRapSource.com]<br />
* '''Nacimiento''':28/dic/2012 <br />
* [[Clone wars:Impresora Magrathea|Más información]]<br />
|<center>[[File:Dont_panic.png|250px]]</center><br />
|----------<br />
| <center>[[File:Togusha.jpg|200px]]</center> <br />
*Asignado: ok<br />
*Recortador : Paclón<br />
|<br />
*'''Clon #100.12''': <font color="#0000FF">Tachikoma</font><br />
*'''Lugar''': Lanzarote (Canarias)<br />
*'''Familia''': Prusa iteración 2<br />
* '''Generación''': 3<br />
*'''Autor''': Jonás Rodriguez Placeres<br />
*'''Impresora progenitora:''': PacleMAKER<br />
*'''Nacimiento''': 28/Diciembre/2012<br />
*'''MÁS INFORMACIÓN'''<br />
| <center>[[File:Tachikoma_1.jpg|200px]]</center> <br />
|------------- <br />
| <center>[[File:Esfinger_printer.jpg|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #100.13''': <font color="#0000FF">Esfinger</font><br />
* '''Lugar''': Tomelloso, Ciudad Real<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 2<br />
* '''Autor''': Francisco Javier García<br />
* '''Impresora progenitora''': Mardan<br />
* '''Nacimiento''':28/dic/2012 <br />
|<center>[[File:Esfinger_avatar.JPG|250px]]</center><br />
|------------- <br />
| <center>[[File:Impresora_santiago_prego.jpg|250px]]</center><br />
*Asignado: ok<br />
*Recortador : Paclón<br />
|<br />
* '''Clon #100.14''': <font color="#0000FF">Pirate</font><br />
* '''Lugar''': Fene (A Coruña) <br />
* '''Familia''': Prusa Iteration 2 [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2]<br />
* '''Generación''': 3<br />
* '''Autor''': Santiago Prego<br />
* '''Impresora progenitora''': Uterus [http://www.reprap.org/wiki/Clone_wars:_Impresora_Uterus]<br />
* '''Nacimiento''':28/dic/2012 <br />
|<center>[[File:pirate.png|250px]]</center><br />
|----------<br />
| <center>[[File:Impresora_Bruno.JPG|250px]]</center><br />
Asignado: ok <br />
*RECORTANDO:ADANSCW<br />
|<br />
* '''Clon #100.15''': <font color="#0000FF">Bruno</font> <br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': PrintrBot<br />
* '''Generación''': 4<br />
* '''Autor''': Daniel Ferrer<br />
* '''Impresora progenitora''': Geek-X-truder<br />
* '''Nacimiento''':30/dic/2012 <br />
|<center>[[File:Avatar_Daniel_impresora_bruno.JPG|250px]]</center><br />
|----------<br />
| <center>[[File:Impresora_renovatio.jpg|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #100.16''': <font color="#0000FF">Renovatio</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': PrintrBot<br />
* '''Generación''': 3<br />
* '''Autor''': Julio Galarón<br />
* '''Impresora progenitora''': Úterus<br />
* '''Nacimiento''':31/dic/2012 <br />
* [[Clone Wars:_Impresora_Renovatio|MAS INFORMACIÓN]]<br />
|<center>[[250px]]</center><br />
¿Podeis hacerle un loguito de esos verdes? :P<br />
|<br />
|----------<br />
| <center>[[File:Porta3.jpg|250px]]</center><br />
*Asignado: ok<br />
*RECORTANDO:Adans<br />
|<br />
* '''Clon #100.17''': <font color="#0000FF">RinceWind</font><br />
* '''Lugar''': Valladolid<br />
* '''Familia''': PortaBee<br />
* '''Generación''': 3<br />
* '''Autor''': Macnetic<br />
* '''Impresora progenitora''': Michaelmas<br />
* '''Nacimiento''':31/dic/2012 <br />
|<center>[[File:Macnetic.png|250px]]</center><br />
|----------<br />
| <center>[[File:ClonX-Jaume.g.jpg|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #118''': <font color="#0000FF">"X"</font><br />
* '''Lugar''': Barcelona<br />
* '''Familia''': Prusa Mendel Interacción II<br />
* '''Generación''': 3<br />
* '''Autor''': Jaume G.<br />
* '''Impresora progenitora''': Johnny 5<br />
* '''Nacimiento''':01/enero/2013 <br />
|<center>[[File:ClonX-Jaume-Logo.jpg|250px]]</center><br />
|----------<br />
| <center>[[File:PENDIENTE.JPG|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #119''': <font color="#0000FF">PocketP3D</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa Mendel Interacción II<br />
* '''Generación''': 2<br />
* '''Autor''': Julian Carrillo<br />
* '''Impresora progenitora''': Johnny 5<br />
* '''Nacimiento''':03/enero/2013 <br />
|<center>[[250px]]</center><br />
|----------<br />
| <center>[[File:Impresora_Exoudina3D.jpg|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #120''': <font color="#0000FF">Exoudina3D</font><br />
* '''Lugar''': Granada<br />
* '''Familia''': Mendel Prusa Iteración 2<br />
* '''Generación''': 4<br />
* '''Autor''': Juanma (Exodous)<br />
* '''Impresora progenitora''': Y-Wing<br />
* '''Nacimiento''':04/enero/2013 <br />
|<center>[[File:Exodous_fire.jpg|250px]]</center><br />
|----------<br />
<br />
| <center>[[File:3D-JAM.jpg|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #121''': <font color="#0000FF">3D-JAM</font><br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': Mendel Prusa Iteración 2<br />
* '''Generación''': 2<br />
* '''Autor''': Enrique Martinez<br />
* '''Impresora progenitora''': Gandalf the transparent [http://www.reprap.org/wiki/Clone_wars:_Impresora_Gandalf_the_transparent]<br />
* '''Nacimiento''':06/octubre/2012 <br />
| <center>[[File:Logo_3DJAM.jpg|200px]]</center><br />
|----------<br />
| <center>[[File:Khan.jpg|250px]]</center><br />
*Asignado: ok<br />
*Recortador:AdansCw<br />
|<br />
* '''Clon #123''': <font color="#0000FF">Khan</font><br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': Mendel Prusa Iteración 2<br />
* '''Generación''': 2<br />
* '''Autor''': Ignacio Mora<br />
* '''Impresora progenitora''': Rewok [http://www.reprap.org/wiki/Clone_wars:_Impresora_Rewok]<br />
* '''Nacimiento''':16/Enero/2013<br />
| <center>[[File:Imster.jpg|200px]]</center><br />
|----------<br />
| <center>[[File:Prusita2.jpg|250px]]</center><br />
*Asignado: ok<br />
*Recortador:AdansCw<br />
|<br />
* '''Clon #124:''' <font color="#0000FF">Queen Mother</font> <br />
* '''Lugar:''' Barcelona (Cataluña)<br />
* '''Modelo:''' [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Autor:''' Sjædric Moreno<br />
* '''Progenitor:''' Johnny#5<br />
* '''Generación:''' 2<br />
* '''Nacimiento''':20/Nov/2012<br />
* [[Clone Wars: Impresora Queen Mother|FICHA PERSONAL DE Queen Mother]]<br />
|<center> [[File:J5.jpg|200px]]</center><br />
<center> "Mi progenitor" </center><br />
|------------<br />
<br />
<br />
|-------------<br />
| <center>[[File:Blue_Blood.JPG|250px]]</center><br />
*Asignado: ok<br />
*Recortador:AdansCw<br />
|<br />
* '''Clon #126:''' <font color="#0000FF">Blue_Blood</font> <br />
* '''Lugar:''' Madrid<br />
* '''Modelo:''' Prusa Iteration 2<br />
* '''Autor: Jorge Fernández<br />
* '''Impresora progenitora:''' [http://www.reprap.org/wiki/Clone_wars:Impresora_Mardan Mardan]<br />
* '''Generación:''' 2<br />
* '''Nacimiento''':19/Enero/2013<br />
|<center> Blue_Blood, experimentado player de: </center><br />
<center>[[File:Blue_Blood2.jpg|220px]]</center><br />
<br />
|---------<br />
<br />
|-------------<br />
| <center>[[File:Foto_LdMPrinter_R_01.jpg|250px]]</center><br />
*Asignado: ok<br />
*Recortador:AdansCw<br />
|<br />
* '''Clon #127:''' <font color="#0000FF">LdMPrinter-R-01</font> <br />
* '''Lugar:''' Yecla<br />
* '''Modelo:''' Prusa Iteration 2<br />
* '''Autor:''' Gonzalo Hernández<br />
* '''Impresora progenitora:''' Desconocida<br />
* '''Generación:''' 1<br />
* '''Nacimiento''':23/Enero/2013<br />
|<center>[[250px]]</center><br />
|---------<br />
|<center>[[File:BD.jpg|250px]]</center><br />
*Asignado: ok<br />
*Recortador:AdansCw<br />
|<br />
* '''Clon #128:''' <font color="#0000FF">BLUE DEMON</font> <br />
* '''Lugar:''' Culiacan Sinaloa Mexico<br />
* '''Modelo:''' Prusa Iteration 2<br />
* '''Autor:''' Daniel Mercado<br />
* '''Impresora progenitora:''' Desconocida<br />
* '''Generación:''' 1<br />
* '''Nacimiento''':24/Enero/2013<br />
|<center>[[File:BDmask.png|250px]]</center><br />
|---------<br />
| <center>[[File:Gcast_1imprus.JPG|250px]]</center><br />
Asignado: ok<br />
| <br />
* '''Clon #130:''' <font color="#00FF00"> '''G-Cast'''</font><br />
* '''Lugar:''' Guadalajara, México<br />
* '''Modelo:''' [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Autor:''' MioCid (Fabian Vargas)<br />
* '''Impresora progenitora:''' Mardan [http://www.reprap.org/wiki/Clone_wars:Impresora_Mardan]<br />
* '''Generación:''' 2<br />
* '''Nacimiento:''' 28/Enero/2013<br />
* (Foto de impresora pendiente... pues se esta poniendo bella)<br />
| <center>[[File:GCast.png|180px]]</center><br />
|---------<br />
| <center>[[File:LCD CHU.jpg|150px]]</center> <br />
Asignado: ok<br />
|<br />
* '''Clon #131:''' <font color="#0000FF"> '''ChUnthor'''</font><br />
* '''Lugar:''' Igualada, Barcelona<br />
* '''Modelo:''' [http://www.reprap.org/wiki/Clone_wars:_Printrbot_v2 Printrbot V2]<br />
* '''Autor:''' User:Ocellet; Javier Pajares<br />
* '''Impresora progenitora:''' Hija de Geek-X-Truder, nieta de Úterus, bisnieta de R2D2<br />
* '''Generación:''' 4<br />
* '''Nacimiento:''' 22/Enero/2013<br />
* Foto de impresora pendiente... <br />
| <center>[[File:chuunthor.jpg|240px]]</center><br />
|---------<br />
| |<center>[[File:estado.jpg|150px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #132:''' <font color="#0000FF"> '''Robotín'''</font><br />
* '''Lugar:''' Santa Cruz de Tenerife<br />
* '''Modelo:''' [http://www.reprap.org/wiki/Clone_wars:_Printrbot_v2 Printrbot V2]<br />
* '''Autor:''' [https://plus.google.com/u/0/110556455513477816958/posts Julián García Roger]<br />
* '''Impresora progenitora:''' [http://www.reprap.org/wiki/Clone_wars:Impresora_Bender_doblador_rodr%C3%ADguez Bender Doblador Rodríguez]<br />
* '''Generación:''' 2<br />
* '''Nacimiento:''' 26/Enero/2013<br />
| <center>[[File:Robotín.jpg|180px]]</center><br />
|---------<br />
<br />
{{Template:CloneWars_clon|134|Giskard|Prusa Iteracion 3|4|29/Enero/2013|Alejandro Suárez, Javier Briz|[[Clone wars:Impresora EsterPiscole|Ester Píscole]]|Universidad de Zaragoza|Clone wars:Impresora Giskard|File:Impresora_giskard.jpg|File:Logo_pulsar.png}}<br />
<br />
Asignado: ok<br />
<br />
{{Template:CloneWars_clon|135|Hydra|Prusa Iteration 2|3|30/Enero/2013|Sergi Pérez Labernia|Guaifi|Cornellà (Barcelona)|Clone wars: Impresora Hydra|File:Hydra_foto3.jpg|File:Obras.jpg}}<br />
<br />
Asignado: ok<br />
<br />
|---------<br />
<br />
| <center>[[File:Ladelprint.jpg|200px]]</center> <br />
Asignado: ok<br />
<br />
Recorte: Chema<br />
|<br />
* '''Clon #137:''' <font color="#0000FF"> '''LADELPRINT'''</font>.<br />
* '''Lugar:''' Sada (La Coruña).<br />
* '''Tipo:''' [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa2]<br />
* '''Autor:''' David Pousada<br />
* '''Impresora progenitora:''' Guaifi.<br />
* '''Nacimiento:''' 30/Enero/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/Sanguinololu/es Sanguinololu 1.3a]<br />
* '''Firmware:''' [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Hot-End:''' Polacosnozzle 0.5mm<br />
|<br />
|---------<br />
|<center>[[File:IMG 20130315 212951.jpg|150px]]</center> <br />
Asignado: ok<br />
Recorte: Chema<br />
|<br />
* '''Clon #139:''' <font color="#0000FF"> '''Plottercín3d'''</font>.<br />
* '''Lugar:''' Madrid<br />
* '''Tipo:''' [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Autor:''' Carlos García Fernámdez CgarciaWC<br />
* '''Impresora progenitora:''' Othon<br />
* '''Nacimiento:''' 27/1/2013<br />
* '''Electrónica:''' Ramps 1.4<br />
* '''Firmware:''' ???<br />
* '''Extrusor:''' <br />
* '''Hot-End:''' Budas <br />
|<center>[[File:Logo_plottercin.jpg|150px]]</center><br />
|------------- <br />
| <center>[[File:JarJar2.jpg|150px]]</center> <br />
|* '''Clon #140:''' <font color="#0000FF"> '''Jar Jar #140'''</font>.<br />
<br />
* Lugar: Zarautz (Gipuzkoa)<br />
* Tipo: Prusa Iteration 2<br />
* Autor: Lizar Azkune<br />
* Impresora progenitora: [http://www.reprap.org/wiki/Clone_wars:Impresora_Mardan Mardan]<br />
* '''Nacimiento:''' 01/Febrero/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Extrusor:''' [http://reprap.org/wiki/Wade%27s_Geared_Extruder Wade's extruder] (plástico de 3mm)<br />
* '''Hot-End:''' [https://github.com/CADesigns/FaryNozzle-1.0 Farynozzle 1.0]<br />
|<center> [[File:Zara.png|150px]]</center><br />
<br />
{{Template:CloneWars_clon|141|El Trasto|Prusa Iteracion 2|4|03/Febrero/2013|Jorge Herrero Esteban-Infantes|[http://www.reprap.org/wiki/Clone_wars:Impresora_Mardan Mardan]|Madrid (Simancas)|Clone wars:Impresora Trasto|File:El_trasto.JPG|File:Diablete.jpg}}<br />
<br />
Asignado: ok<br />
Recorte: Chema<br />
<br />
{{Template:CloneWars_clon|142|Bruniik|Prusa Iteracion 2|4|05/Febrero/2013|Adrian R. (adroqui)|Y-Wing|St. Pere de Ribes (Barcelona)|Clone wars:Impresora Bruniik|File:PENDIENTE.JPG|File:PENDIENTE.JPG}}<br />
<br />
Asignado: ok<br />
|---------<br />
| <center>[[File:Matriuska.jpg|150px]]</center><br />
|<br />
* Lugar: Burgos<br />
* Tipo: Prusa Iteration 2<br />
* Autor: Manuel Bocos<br />
* Impresora progenitora: Daneel 3-law <br />
* '''Nacimiento:''' 10/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Extrusor:''' [http://reprap.org/wiki/Wade%27s_Geared_Extruder Wade's extruder] (plástico de 3mm)<br />
* '''Hot-End:''' comprado en reprap.cc<br />
* '''<font color="#0000FF">Alteraciones:</font>'''<br />
** Hotend 0.5mm tipo NISU <br />
** Poleas T2.5 y acoples eje Z en aluminio<br />
** Ajuste de hotend 10mm a extrusor 16mm con pasta CEYS superbarra multiusos.<br />
*[http://reprap.org/wiki/Clone_wars:Impresora_Matriuska MAS INFORMACIÓN]<br />
| |<center>[[File:cosa.jpg|150px]]</center> <br />
|---------<br />
<br />
|---------<br />
| <center>[[File:SprintFull.png|150px]]</center><br />
|* '''Clon #145:''' <font color="#0000FF"> '''SprintFull''</font>.<br />
* Lugar: Rivas (Madrid)<br />
* Tipo: Prusa Iteration 2<br />
* Autor: SkilFull<br />
* Impresora progenitora: Y-Wing<br />
* '''Nacimiento:''' 01/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Extrusor:''' [http://reprap.org/wiki/Wade%27s_Geared_Extruder Wade's extruder] (plástico de 3mm)<br />
* '''Hot-End:''' J-Head<br />
<br />
|<center>[[File:PENDIENTE.JPG|150px]]</center> <br />
<br />
<br />
|---------<br />
| <center>[[File:fradesamolder.jpg|150px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #147:'''<font color="#0000FF">''' fradesamolder'''</font>.<br />
* '''Lugar:''' Santiago de Compostela<br />
* '''Tipo:''' Prusa Iteration 2 [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2]<br />
* '''Autor:''' Juan Rodríguez (JrodriCW)<br />
* '''Impresora progenitora:''' Gandalf the transparent<br />
*'''Nacimiento:''' 10/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Hot-End:''' Polaco<br />
*[http://reprap.org/wiki/Clone_wars:fradesamolder MAS INFORMACIÓN]<br />
|<center>[[File:obras.jpg|250px|250px]]</center><br />
<br />
|---------<br />
| <center>[[File:Shmi skywalker b.jpg|150px]]</center><br />
|<br />
* '''Clon #148:'''<font color="#0000FF">''' Shmi Skywalker'''</font>.<br />
* '''Lugar:''' Pamplona<br />
* '''Tipo:''' Prusa Iteration 2 [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2]<br />
* '''Autor:''' Nicholas Dawe (MVX15)<br />
* '''Impresora progenitora:''' Manuena (Clon 10)<br />
*'''Nacimiento:''' 10/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' Marlin<br />
* '''Hot-End:''' J-Head MK V<br />
|<center>[[File:Darth.jpeg|250px|250px]]</center><br />
<br />
|---------<br />
| <center>[[File:Obras.jpg|150px]]</center><br />
|<br />
* '''Clon #149:'''<font color="#0000FF">''' LEM'''</font>.<br />
* '''Lugar:''' Murcia<br />
* '''Tipo:''' Prusa Iteration 2 [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2]<br />
* '''Autor:''' delcotron<br />
* '''Impresora progenitora:''' X-Wing e Y-Wing<br />
*'''Nacimiento:''' 04/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' Marlin<br />
* '''Hot-End:''' J-Head MK V<br />
<br />
| |<center>[[File:Lem.jpg|180px|180px]]</center><br />
<br />
|---------<br />
| <center>[[File:MeMe.JPG|150px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #150:'''<font color="#0000FF">''' MeMe'''</font>.<br />
* '''Lugar:''' Zaragoza<br />
* '''Tipo:''' Prusa Iteration 3 [http://www.reprap.org/wiki/Clone_wars:_Prusa_iteraci%C3%B3n_3]<br />
* '''Autor:''' Carlos Monreal (CADesigns)<br />
* '''Impresora progenitora:''' Ester Píscole y Giskard<br />
*'''Nacimiento:''' 16/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' [https://github.com/algspd/asimov/tree/master/impresoras/giskard/Sprinter Sprinter modificado por Pulsar]<br />
* '''Hot-End:''' [https://github.com/CADesigns/FaryNozzle-1.0 Farynozzle 1.0]<br />
| <center>[[File:Meme.gif|150px]]</center><br />
<br />
{{Template:CloneWars_clon|151|[http://www.reprap.org/wiki/Clone_Wars:_Impresora_morpi morpi]|[http://www.reprap.org/wiki/Clone_wars:_Printrbot_v2 Printrbot v2]|4|28/Ene/2013|José Ángel Martínez|[http://www.reprap.org/wiki/Clone_wars:_Impresora_Uterus Úterus]|Murcia|Clone wars:Impresora morpi|File:Obras.jpg|File:Obras.jpg}}<br />
<br />
{{Template:CloneWars_clon|152|[http://www.reprap.org/wiki/Clone_Wars:_Impresora_PenBot PenBot]|Prusa Iteration 2 [http://www.reprap.org/wiki/Clone_wars:_Prusa_iteraci%C3%B3n_2]|4|09/Feb/2013|Manuel Hidalgo (leobot)|[http://www.reprap.org/wiki/Clone_wars:_Impresora_Uterus Úterus]|Albacete|Clone wars:Impresora PenBot|File:FotoPenBot.jpg|File:PenBot01.jpg}}<br />
<br />
{{Template:CloneWars_clon|153|[http://www.reprap.org/wiki/Clone_wars:_Impresora_Ger-truder Ger-truder]|[http://www.reprap.org/wiki/Clone_wars:_Printrbot_v2 Printrbot v2]|4|20/Feb/2013|Antonio Morales|[http://www.reprap.org/wiki/Clone_wars:Impresora_Geek-X-truder Geek-X-truder]|Almeria|[http://www.reprap.org/wiki/Clone_wars:_Impresora_Ger-truder MAS INFORMACION]|File:Ger-truder-nacimiento.jpg|File:Ger-truder.jpg}}<br />
<br />
<br />
<br />
<br />
|--------<br />
<br />
<br />
|--------<br />
| <center>[[File:PrusaIcaro.JPG|150px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #156:'''<font color="#0000FF">''' ICARO'''</font>.<br />
* Modelo: [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2 Prusa Mendel IT 2]<br />
* Autor: Jose Manuel Martinez Ortega<br />
* Lugar: Novelda(Alicante)<br />
* Progenitor: Desconocido<br />
* Nacimiento: 22/02/2013<br />
* Electrónica: RAMPS 1.4<br />
* Firmware: Sprinter<br />
* Hot-End: J-HEAD MK IV <br />
| <center>[[File:icaro.jpg|150px]]</center><br />
<br />
|-------<br />
<br />
|---------<br />
| <center>[[File:butana.jpg|150px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #157:'''<font color="#0000FF">''' Butana'''</font>.<br />
* '''Lugar:''' Aranjuez<br />
* '''Tipo:''' [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2 Prusa Iteration 2]<br />
* '''Autor:''' Fernando Bueno<br />
* '''Impresora progenitora:''' [http://www.reprap.org/wiki/Clone_wars:_Impresora_3D-Prisa 3DPrisa]<br />
* '''Nacimiento:''' 24/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' Sprinter<br />
* '''Hot-End:''' Budaschnozzle 1.2<br />
* '''Descendencia: ''' Clon #286 - Butana Remix Tricolore (hija) y Clon #329 - Butana SmartRAP Mini (nieta)<br />
* '''[https://plus.google.com/photos/116817292850753768933/albums/5848989618489488385?authkey=CJK2ibT27Nvm2wE Fotos e info]'''<br />
| <center>[[File:logo_fbuenonet.png|150px]]</center><br />
|---------<br />
<br />
<br />
|---------<br />
| <center>[[File:La_foto5.JPG|150px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #100.58:'''<font color="#0000FF">''' Nida'''</font>.<br />
* '''Lugar:''' Alcala de Henares<br />
* '''Tipo:''' [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2 Prusa Iteration 2]<br />
* '''Autor:''' JJViton<br />
* '''Impresora progenitora:''' Clon #39 Daneel 3-law <br />
*'''Nacimiento:''' 10/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.3 RAMPS 1.3]<br />
* '''Firmware:''' Sprinter<br />
* '''Hot-End:''' Budas Gallego<br />
* '''Más info:''' [http://reprap.org/wiki/User:JvitonCW]<br />
<br />
|---------<br />
<br />
<br />
|---------<br />
| <center>[[File:Starken_big.JPG|150px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #159:'''<font color="#0000FF">''' Starken'''</font>.<br />
* '''Lugar:''' Valladolid<br />
* '''Tipo:''' [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2 Prusa Iteration 2]<br />
* '''Autor:''' Emilio José Morán Hevia<br />
* '''Impresora progenitora:''' Mardan<br />
*'''Nacimiento:''' 20/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' Sprinter<br />
* '''Hot-End:''' J-head<br />
* '''Más info:'''<br />
| <center>[[File:STARKEN_logo.jpg|150px]]</center><br />
|---------<br />
|---------<br />
|<center>[[File:Impresora_greenhornet.jpg|250px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #160:''' ''''''Green Hornet''''''<br />
* '''Lugar''':la laguna -Tenerife<br />
* '''Tipo''': Prusa i2 [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2]<br />
* '''Autor''': Andrés González Prérez<br />
* '''Impresora progenitora:[[Clone wars:Impresora X Wing|X-Wing]]<br />
**'''Nacimiento:''' 26/02/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Sprinter<br />
**'''Hot-End: J-HEAD MK IV <br />
** '''<font color="red">Pendiente:</font>'''<br />
*** Mejoras pantalla LCD<br />
*** Imprimir un juego de piezas completo para montar otro clon<br />
|<center>[[File:Green_hornet.jpg|250px]]</center><br />
<br />
<br />
<br />
<br />
|---------<br />
|---------<br />
|<center></center><br />
|<br />
* '''Clon #161:'''<font color="#0000FF">''' Ima'''</font>.<br />
* '''Lugar''':Ciudad Real<br />
* '''Tipo''': Prusa i2 <br />
* '''Autor''': Marciano de la Hoz<br />
* '''Impresora progenitora: Mardan<br />
**'''Nacimiento:''' 28/02/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Sprinter<br />
**'''Hot-End: J-HEAD MK IV modificado <br />
<br />
<br />
|<center></center><br />
<br />
<br />
<br />
|---------<br />
|---------<br />
|<center>[[File:Tramuntana3D.jpg|250px]]</center><br />
|<br />
* '''Clon #162:'''<font color="#0000FF">''' Tramuntana3D'''</font>.<br />
* '''Lugar''':Girona<br />
* '''Tipo''': Prusa I3 Single Plate Aluminio <br />
* '''Autor''': Lluís Vilarrúbies<br />
* '''Impresora progenitora: Ester Píscole<br />
**'''Nacimiento:''' 03/02/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Sprinter<br />
**'''Hot-End: budaschnozzle 1.2 0,5<br />
<br />
<br />
|<center>[[File:Obras.jpg|150px]]</center><br />
<br />
<br />
|---------<br />
|---------<br />
|<center>[[File:ImpresorahothI.JPG|250px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #163:'''<font color="#0000FF">''' Hoth I'''</font>.<br />
* '''Lugar''':Valencia<br />
* '''Tipo''': Prusa I2 <br />
* '''Autor''': Pau Chafer<br />
* '''Impresora progenitora: PacleMAKER<br />
**'''Nacimiento:''' 19/02/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Sprinter<br />
**'''Hot-End: PolacoNozzle<br />
<br />
<br />
|<center>[[File:LogoHoth1.jpg|250px]]</center><br />
<br />
<br />
<br />
|---------<br />
| <center>[[File:Obras.jpg|150px]]</center><br />
|<br />
<br />
* '''Clon #165:'''<font color="#0000FF">''' Goliath'''</font>.<br />
* '''Lugar''': Bilbao<br />
* '''Tipo''': Printrbot <br />
* '''Autor''': David Gonzalez (aka Ghosthawk)<br />
* '''Impresora progenitora: Tron<br />
**'''Nacimiento:''' 01/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End: Polaconozzle 0.5mm<br />
| <center>[[File:Goliath.gif|200px]]</center><br />
|---------<br />
| <center>[[File:ImpresoraKAZA.png|250px]]</center><br />
|<br />
* '''Clon #166:'''<font color="#0000FF">''' KAZA'''</font>.<br />
* '''Lugar''': Vigo (Alrededores más bien, pero bueno...XD)<br />
* '''Tipo''': Printrbot V2<br />
* '''Autor''': Valentín Cancelas, Gonzalo Alonso<br />
* '''Impresora progenitora: Gandalf the transparent ( Donación proyecto MultiExtruder )<br />
**'''Nacimiento:''' 03/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Sprinter<br />
**'''Hot-End: Polaconozzle<br />
| <center>[[File:Obras.jpg|150px]]</center><br />
|---------<br />
| <center>[[File:Obras.jpg|250px]]</center><br />
|<br />
* '''Clon #167:'''<font color="#0000FF">''' DRACO'''</font>.<br />
* '''Lugar''': Aguascalientes,Ags Mexico<br />
* '''Tipo''': Prusa I2<br />
* '''Autor''': Eduardo Alvarez<br />
* '''Impresora progenitora: MakerMex<br />
**'''Nacimiento:''' 03/02/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End: Polaconozzle<br />
| <center>[[File:Obras.jpg|150px]]</center><br />
|---------<br />
| <center>[[File:Obras.jpg|250px]]</center><br />
|<br />
* '''Clon #169:'''<font color="#0000FF">''' C-Wing'''</font>.<br />
* '''Lugar''': Manresa, España<br />
* '''Tipo''': Prusa I3<br />
* '''Autor''': [https://sites.google.com/a/pentabyte.es/chemadesigns/ Chema]<br />
* '''Impresora progenitora: Bumblebee<br />
**'''Nacimiento:''' 09/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End: Budas chino<br />
| <center>[[File:Chema.jpg|250px]]</center><br />
|---------<br />
| <center>[[File:Obras.jpg|250px]]</center><br />
|<br />
* '''Clon #170:'''<font color="#0000FF">''' B-Ri2-D2'''</font>.<br />
* '''Lugar''': Málaga<br />
* '''Tipo''': Prusa I2<br />
* '''Autor''': Israel Berrido Subires y Alejandro Berrido Suibires<br />
* '''Impresora progenitora: ¿?<br />
**'''Nacimiento:''' 10/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End: Budas Gallego (de Fidel)<br />
| <center>[[File:Obras.jpg|150px]]</center><br />
|---------<br />
| <center>[[File:Obras.jpg|150px]]</center> <br />
|* '''Clon #171:'''<font color="#0000FF">''' JENDRINATOR'''</font>.<br />
* '''Lugar''': Tarragona, España<br />
* '''Tipo''': Prusa I2<br />
* '''Autor''': AchornetCW (Adria Chornet)<br />
* '''Impresora progenitora: Michaelmas<br />
**'''Nacimiento:''' 12/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Sprinter<br />
**'''Hot-End: Polaco<br />
| <center> [[File:Logo_jendrinatorV1.jpg|150px]]</center><br />
|------<br />
| <center>[[File:Clon-172-UCOprinter.jpg|220px]]</center><br />
|<br />
* '''Clon #173''': '''<font color="#0000FF">UCOprinter</font>'''<br />
Pertenecio a la Reclone3d's Farm<br />
* '''Lugar''': Universidad de Córdoba<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 4<br />
* '''Autor''': Exergy123<br />
* '''Impresora Progenitora''': Y-Wing<br />
* Nacimiento: '''19/Enero/2013''' <br />
* [MÁS INFORMACIÓN]<br />
| <center>[[File:Logo_UCOprinter.jpg|200px]]</center><br />
|---------<br />
| <center>[[File:Clon-173-Pepabot.jpg|220px]]</center><br />
|<br />
* '''Clon #174''': '''<font color="#0000FF">Pepabot</font>'''<br />
* '''Lugar''': Universidad de Málaga<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 4<br />
* '''Autor''': Juanma Tirado<br />
* '''Impresora Progenitora''': Y-Wing<br />
* Nacimiento: '''19/Enero/2013''' <br />
* [MÁS INFORMACIÓN]<br />
| <center>[[File:Logo_Pepabot.jpg|200px]]</center><br />
|---------<br />
| <center>[[File:Clon-173-Z-Wing.jpg|220px]]</center><br />
|<br />
* '''Clon #175''': '''<font color="#0000FF">Z-Wing "El espíritu de Zaragoza</font>'''<br />
Pertenece a Reclone3d's Farm<br />
* '''Lugar''': Universidad de Málaga<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 4<br />
* '''Autor''': Exergy123<br />
* '''Impresora Progenitora''': Reclone3d's Farm(X-Wing, Y-Wing y UCOprinter)<br />
* Nacimiento: '''19/Enero/2013''' <br />
* [MÁS INFORMACIÓN]<br />
| <center>[[File:Logo_Z-Wing.jpg|200px]]</center><br />
|---------<br />
| <center>[[File:Ldp.jpg|250px]]</center><br />
|<br />
* '''Clon #176:'''<font color="#0000FF">''' AT-TE_LDP- '''</font>.<br />
* '''Lugar''': [http://ldp.etsii.upm.es Laboratorio Desarrollo de Productos. Lab Prototipado Rápido. ETSI Industriales. UPM]<br />
* '''Tipo''': Prusa I2<br />
* '''Generación''': 2<br />
* '''Autor''': Pedro Ortego<br />
* '''Impresora progenitora:''' [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R3 R3]<br />
** '''Nacimiento:''' 21/03/2013<br />
** '''Electrónica''': [http://reprap.org/wiki/RAMPS_1.3 RAMPS 1.3]<br />
** '''Firmware''': Sprinter<br />
** '''Hot-End''': Buda 0.5 Menextech<br />
| <center>[[File:LDP_Dim.jpg|150px]]</center><br />
|---------<br />
|------<br />
| <center>[[File:ribosome.jpg|250px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #177:'''[http://www.reprap.org/wiki/Clone_wars:_Impresora_Ribosome <font color="#0000FF">''' Ribosome'''</font>].<br />
* '''Lugar''': Madrid<br />
* '''Tipo''': Prusa i3 Box Frame<br />
* '''Autor''': [http://www.reprap.org/wiki/User:yOPERO yOPERO] <br />
* '''Impresora progenitora:''' [http://www.reprap.org/wiki/Clone_wars:Impresora_Uterus Uterus] <br />
**'''Nacimiento:''' 19/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End: Budas Chino de Fabster3d<br />
| <center>[[File:Ribosome_logo.jpg|250px]]</center><br />
|---------<br />
|------<br />
| <center>[[File:Prusikito.jpg|250px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #178:'''[http://www.reprap.org/wiki/Clone_wars:_Impresora_Prusikito ''' Prusikito''']<br />
* '''Lugar''': Getafe (Madrid)<br />
* '''Tipo''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Autor''': Fernando Murillo y Elena de Pedro<br />
* '''Impresora progenitora:''' [http://www.reprap.org/wiki/Clone_wars:Impresora_Manuela Manuela] <br />
* '''Generación''': 4<br />
**'''Nacimiento:''' 22/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End''': Budaschnozzle 1.2<br />
| <center>[[File:Logoprusikito.jpg|400px]]</center><br />
|---------<br />
|------<br />
| <center>[[File:Skullpt Foto.jpg|150px]]</center> <br />
Recorte: Chema<br />
|<br />
* '''Clon #179:'''<font color="#0000FF">''' -Skullpt-'''</font>.<br />
* '''Lugar''': Écija (Sevilla)<br />
* '''Tipo''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Autor''': [[User:RalvarezCW]]<br />
* '''Impresora progenitora:''' : ? <br />
* '''Generación''': ?<br />
**'''Nacimiento:''' 24/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Sprinter SuperEstable<br />
**'''Hot-End''': Budaschnozzle 1.3<br />
| <center>[[File:Skullpt logo.jpg|150px]]</center><br />
|------<br />
| <center>[[File:IronHide30.jpg|250px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #182:'''<font color="#0000FF">'''Iron Hide 3.0'''</font>.<br />
* '''Lugar''': Vírgen de Guadalupe (Badajoz)<br />
* '''Tipo''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 3<br />
* '''Autor''': Ismael De Miguel (Driftwr) <br />
* '''Impresora progenitora:''' ""IronHide"" <br />
* '''Generación''': <br />
**'''Nacimiento:''' ???<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' <br />
**'''Hot-End''': <br />
|<center>[[File:Obras.jpg|150px]]</center><br />
|---------<br />
|------<br />
|<center>[[File:tkl.jpg|200px]]</center><br />
|<br />
* '''Clon #183:'''<font color="#0000FF">'''- TKL 1.0 -'''</font>.<br />
* '''Lugar''': Madrid<br />
* '''Tipo''': [http://reprap.org/wiki/Prusa_Air_2] Air 2 - Iteration 2<br />
* '''Autor''': Angel Fdez (Trocolo) <br />
* '''Impresora progenitora:''' ""Bumblebee"" <br />
* '''Generación''': <br />
**'''Nacimiento:''' 21-03-13<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' <br />
**'''Hot-End''': Budas-Chino<br />
|<center>[[File:gallina.jpg|150px]]</center><br />
<center>Cubo de Calibracion</center><br />
|---------<br />
|<center>[[File:KalosW.JPG|200px]]</center> <br />
|<br />
* '''Clon #184''': [[Clone wars:_Impresora_Kalos|'''Kalos''']]<br />
* '''Lugar:''' Algeciras (Cádiz)<br />
* '''Familia''': [http://www.reprap.org/wiki/Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame Prusa Iteration 3 - Single Plate]<br />
* '''Generación''': 3<br />
* '''Autor:''' Mariano Dapía ([http://twitter.com/iPadNanito @iPadNanito])<br />
* '''Impresora progenitora:''' [[Clone wars:_Impresora_MayPrinter|'''MayPrintr''']]<br />
* '''Nacimiento:''' 28 de Marzo de 2013 <br />
* '''Electrónica''': [http://www.reprap.org/wiki/Sanguinololu Sanguinololu 1.3a]<br />
* '''Firmware''': [http://www.reprap.org/wiki/Marlin Marlin]<br />
* '''Extrusor''': [http://www.thingiverse.com/thing:18379 Jonas Kuehling's Greg's Wade Reloaded] (3 mm Plastic)<br />
* '''Hot-End''': [http://www.reprap.org/wiki/J-Head J-Head Nozzle]<br />
| <center>[[File:Jarron.png|135px]]</center><br />
|---------<br />
| <center>[[File:FotoPrintFloyd.jpg|150px]]</center> <br />
|<br />
* '''Clon #186:''' <font color="#0000FF">'''Print Floyd'''</font>.<br />
* '''Lugar''': Zaragoza.<br />
* '''Familia''': Prusa iteracción 2<br />
* '''Generación''': 3<br />
* '''Autor''': Jorge Pascual<br />
*'''Impresora progenitora''': Clon #121: 3D-Jam<br />
* '''Nacimiento:''' 7 de Abril de 2013<br />
* '''Electrónica''': [http://arduino.cc/en/Main/ArduinoBoardMega2560 Arduino Mega 2560] + [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Hot-End''': J-Head MK V<br />
* '''Firmware''': Marlin<br />
| <center>[[File:Print_Floyd.jpg|150px]]</center><br />
|---------<br />
| <center>[[File:bruce.jpg|200px]]</center> <br />
|<br />
* '''Clon #188:''' <font color="#0000FF">'''BruceIsPrinting'''</font>.<br />
* '''Lugar''': Pontedeume (A Coruña).<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 5<br />
* '''Autor''': [[User:pinwi|Pinwi]]<br />
*'''Impresora progenitora''': Clon #79: SpongeBot<br />
* '''Nacimiento:''' 10 de abril de 2013<br />
* '''Electrónica''': [[Ramps 1.4]]<br />
* '''Hot-End''': J-Head MkV<br />
* '''Firmware''': [[Sprinter]]<br />
| <center>[[File:bruce2.jpg|200px]]</center><br />
|-------------<br />
|<center>[[File:capitanestado.jpg|270px]]</center> <br />
|<br />
* '''Clon #189:''' <font color="#0000FF">'''CAPITAN CRUNCH'''</font>.<br />
* '''Lugar''': Santiago de Compostela.<br />
* '''Familia''': Prusa Iteracion 2<br />
* '''Autor''': [[Miguif (Miguel Federico)]]<br />
* '''Impresora progenitora''': Clon #32: Guaifi<br />
* '''Nacimiento''': 12 de abril de 2013<br />
* '''<font color="#0000FF">Componentes:</font>'''<br />
** Electrónica: Arduino Mega + Ramps 1.4.<br />
** Hot-end: Jhead.<br />
** Firmware: Sprinter Obijuan. <br />
|<center>[[File:capitancrunch.jpg|200px]]</center><br />
|-------------<br />
| <center>[[File:SAV_Vader.jpg|200px]]</center> <br />
|<br />
* '''Clon #192:''' <font color="#0000FF"> '''SAV Vader'''</font>.<br />
* '''Lugar:''' Madrid.<br />
* '''Tipo:''' Prusa i3<br />
* '''Autor:''' CACER (Familia Cervilla)<br />
* '''Impresora progenitora:''' Clon #136 Prusacervi.<br />
* '''Nacimiento:''' 13 de Abril de 2013<br />
* '''Electrónica''': [[Ramps 1.4]]<br />
* '''Hot-End''': Budas Gagget3D<br />
* '''Firmware''': Marlin<br />
<br />
|<center> [[File:Cacer.jpg|200px]]</center><br />
|--------<br />
| <center>[[File:WALLE.JPG|150px]]</center><br />
|<br />
* '''Clon #193:''' <font color="#0000FF"> '''WALL-E (Nº7)'''</font>.<br />
* '''Familia''': Prusa it3 Single Plate<br />
* '''Generación''': 3<br />
* '''Autor''': [http://www.mbrobotics.es/MbRobotics/Main.html MABLACK (Miguel Angel Berna Alberola)]<br />
* '''Impresora Progenitora''': [http://www.mbrobotics.es/Wiki/index.php?title=JOHNNY5 JOHNNY5] <br />
* '''Electrónica''': [http://reprap.org/wiki/Sanguinololu Sanguinololu]<br />
* '''Firmware''': [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Extrusor''': [http://reprap.org/wiki/Wade%27s_Geared_Extruder Wade's extruder] (plástico de 3mm)<br />
* '''Hot-End''': [http://reprap.org/wiki/J_Head_Nozzle J-Head Mk V-B Spania]<br />
* '''Nacimiento:''' 06 de Abril de 2013<br />
| <center>[[File:Walle.jpg|200px]]</center><br />
|--------<br />
<br />
| <center>[[File:Printy.jpg|150px]]</center><br />
|<br />
* '''Clon #194:''' <font color="#0000FF"> '''Printy'''</font>.<br />
* '''Modelo''': Prusa Mendel (it 2)<br />
* '''Autor''': Ruben Ferrero<br />
* '''Lugar''': Leon<br />
* '''Impresora Progenitora''': Clon #155: CAZURRA <br />
* '''Electrónica''': [http://reprap.org/wiki/Sanguinololu Sanguinololu]<br />
* '''Firmware''': Sprinter super-estable<br />
* '''Hot-End''': J-Head Mk IV<br />
* '''Nacimiento:''' 17 de Abril de 2013<br />
| <center>[[File:RFerrero.jpg|200px]]</center><br />
|--------<br />
<br />
| <center></center><br />
|<br />
* '''Clon #195:''' <font color="#0000FF"> '''Paco Prime'''</font>.<br />
* '''Modelo''': Prusa Mendel (it 2)<br />
* '''Autor''': David Leal<br />
* '''Lugar''': Málaga / San Sebastián<br />
* '''Impresora Progenitora''': Air2 Desconocida.-<br />
* '''Electrónica''': Ramps 1.4/Mega<br />
* '''Firmware''': Marlin/Sprinter<br />
* '''Hot-End''': Hispania<br />
* '''Nacimiento:''' 20 de Abril de 2013<br />
| <center></center><br />
|--------<br />
<br />
| <center>[[File:dalek sec foto.jpg|250px]]</center><br />
|<br />
* '''Clon #196:''' <font color="#0000FF"> '''Dalek_Sec'''</font>.<br />
* '''Modelo''': Prusa Mendel Iteración 2<br />
* '''Autor''': Manu Barranco<br />
* '''Lugar''': Madrid<br />
* '''Impresora Progenitora''': JJMachine<br />
* '''Electrónica''': Ramps 1.4/Mega<br />
* '''Firmware''': Sprinter.<br />
* '''Hot-End''': J-Head Mk V-BV 0.5mm<br />
* '''Nacimiento:''' 22 de Abril de 2013<br />
| <center>[[File:dalek sec.jpg|200px]]</center><br />
|--------<br />
| <center></center><br />
|<br />
* '''Clon #197:''' <font color="#0000FF"> '''Eprintnefrina'''</font>.<br />
* '''Modelo''': Prusa Mendel v1<br />
* '''Autor''': Maria Lopez y Angel Ruiz<br />
* '''Lugar''': Melilla<br />
* '''Impresora Progenitora''': Desconocido<br />
* '''Electrónica''': Ramps 1.3/Mega<br />
* '''Firmware''': Sprinter.<br />
* '''Hot-End''': Buda Gallego<br />
* '''Nacimiento:''' 18 de Abril de 2013<br />
| <center>[[File:epinefrina.jpg|200px]]</center><br />
|--------<br />
| <center>[[File:Spica01.jpg|150px]]</center> <br />
|<br />
* '''Clon #199:''' <font color="#0000FF"> '''Spica'''</font>.<br />
* '''Modelo''': Prusa i3<br />
* '''Autor''': Adrián Alonso [[User: Aalonso]] - Luis Macías [[User: LmaciasCW]]<br />
* '''Lugar''': Madrid<br />
* '''Impresora Progenitora''': Moebius. [http://www.reprap.org/wiki/Clone_wars_Impresora_Moebius]<br />
* '''Electrónica''': Ramps 1.4/Mega<br />
* '''Firmware''': Sprinter superstable.<br />
* '''Hot-End''': Budas Gallego 0.4mm<br />
* '''Nacimiento:''' 19/03/2013.<br />
* [[Clone wars Impresora Spica|Mas información]]<br />
| <center>[[File:Spica.jpg|150px]]</center> <br />
|--------<br />
| <center></center><br />
|<br />
* '''Clon #200''': '''<font color="#0000FF">CopyPrintBot</font>'''<br />
* '''Modelo''': Prusa i2<br />
* '''Autor''': Grunin Nano [[User: Grunin]]<br />
* '''Lugar''': Barcelona<br />
* '''Impresora progenitora''': [[Clone_wars:Impresora_Michaelmas]]<br />
* '''Nacimiento''': 02/05/2013<br />
* '''Electrónica''': Ramps 1.4 <br />
* '''Firmware''': Sprinter<br />
* '''Hot-End''': J-Head 0.4mm<br />
| <center></center><br />
|-------------<br />
| <center>[[File:printfles_3.jpg|150px]]</center> <br />
|<br />
* '''Clon #201''': '''<font color="#0000FF">PrintFles</font>'''<br />
* '''Modelo''': Prusa i2<br />
* '''Autor''': Pablo Bosch[[User: Pifles]]<br />
* '''Lugar''': Madrid (Collado Villalba)<br />
* '''Impresora progenitora''': [[Desconocida]]<br />
* '''Nacimiento''': 28/04/2013<br />
* '''Electrónica''': Ramps 1.4 <br />
* '''Firmware''': Marlin<br />
* '''Hot-End''': Buda Chino 0.5mm<br />
| <center>[[File:printfles_4.jpg|150px]]</center> <br />
| <center></center><br />
|-------------<br />
|<center>[[File:Prusaneurobot.png|200px]]</center> <br />
|<br />
* '''Clon #203''': '''<font color="#0000FF">NeuroBot</font>'''<br />
* Lugar: Granada<br />
* Tipo: Prusa i2<br />
* Impresora progenitora: Avatar (jrdetoro)<br />
* Autor : JtorralbaCW (Jose M Torralba)<br />
* Nacimiento''': 4/05/2013<br />
* Electrónica''': Ramps 1.4 (Taurino)<br />
* Firmware''': Sprinter<br />
* Hot-End''': Budas Gallego<br />
* [http://reprap.org/wiki/Clone_Wars:_Impresora_NeuroBot MAS INFORMACIÓN]<br />
<br />
|<center>[[File:Granadaimprusa.jpg|200px]]</center> <br />
<br />
|------------- <br />
|<center>[[blu3.png|200px]]</center><br />
|<br />
* '''Clon #204''': '''<font color="#0000FF">BLU3</font>'''<br />
* '''Modelo''': Prusa IT2<br />
* '''Autor''': Grupo M2 Asociación de Robótica Educativa Complubot<br />
* '''Lugar''': Alcalá de Henares - Madrid<br />
* '''Impresora progenitora''': [[Carbonite]]<br />
* '''Nacimiento''': 04/05/2013<br />
* '''Electrónica''': Ramps 1.4 <br />
* '''Firmware''': Marlin<br />
* '''Hot-End''': J-Head MkVB<br />
|<center> [[File:Avatar_complubot.png|150px|link=http://www.complubot.org]]</center><br />
<br />
<br />
|------------- <br />
|<center>[[Sin título 1.jpg|200px]]</center><br />
|<br />
* '''Clon #205''': '''<font color="#0000FF">Sin título 1</font>'''<br />
* '''Modelo''': Prusa i3<br />
* '''Autor''': OskarLGS<br />
* '''Lugar''': Cantabria<br />
* '''Impresora progenitora''': Desconocida<br />
* '''Nacimiento''': 5/05/2013<br />
* '''Electrónica''': Sanguinololu 1.3a<br />
* '''Firmware''': Sprinter<br />
* '''Hot-End''': FaryNozzle 2.0<br />
|<center></center><br />
<br />
|------------- <br />
|<center>[[File:Prusa 2 GADES 1imp.jpg|150px]]</center><br />
|<br />
* '''Clon #206''' '''<font color="#0000FF">GADES</font>'''<br />
* Lugar: Cádiz <br />
* Tipo: Prusa Interación 2<br />
* Autor: Rafa Pinilla<br />
* Impresora progenitora: [[Clone wars:Impresora X Wing|X-Wing]]<br />
* '''Nacimiento''': 5/05/2013<br />
* '''Electrónica''': Ramps 1.4<br />
* '''Firmware''': Sprinter Superestable<br />
* '''Hot-End''': J-Head MkVB <br />
|<center></center><br />
|---------<br />
| <center></center> <br />
|<br />
* '''Clon #207''': <font color="#0000FF">Prusimus Prime</font><br />
* '''Lugar''': Mollet del Vallès (Barcelona)<br />
* '''Familia''': Prusa i3 Box Frame<br />
* '''Autores''': Ariadna Trueba y Juan Pedro López<br />
* '''Impresora progenitora''': Alguna de las de Javier Briz :)<br />
* '''Nacimiento''': 08-May-2013<br />
* '''Descendencia''': -<br />
* [[Clone Wars:Impresora Prusimus prime|MÁS INFORMACIÓN]]<br />
| | <center></center> <br />
|---------<br />
| <center></center><br />
|<br />
* '''Clon #208''': <font color="#0000FF">ROBOTIJO</font><br />
* '''Lugar''': ALICANTE<br />
* '''Modelo''': Prusa Interacion 2<br />
* '''Autor''': Paco Martinez<br />
* '''Impresora progenitora''': [[Clone UA]]<br />
* '''Nacimiento''': 09/4/2013<br />
* '''Electrónica''': Ramps 1.4<br />
* '''Firmware''': Marlin<br />
* '''Hot-End''': J- HEAD HISPANIA<br />
<br />
|------------- <br />
|<center>[[File:DAISY.jpg|150px]]</center><br />
|<br />
* '''Clon #209''' '''<font color="#0000FF">DAISY</font>'''<br />
* '"Lugar'": Alcalá de Henares (Madrid)<br />
* '"Tipo'": Prusa Interación 2<br />
* '"Autor'": Sergio García<br />
* '"Impresora progenitora'": [[R5D5]]<br />
* '''Nacimiento''': 12/5/2013<br />
* '''Electrónica''': Ramps 1.4<br />
* '''Firmware''': Sprinter Superestable<br />
* '''Hot-End''': J-Head Hispania<br />
|<center>[[File:DAISY2.jpg|270px]]</center><br />
|---------<br />
<br />
|------------- <br />
|<center>[[File:Prusa_i3_mini.jpg|250px]]</center><br />
|<br />
* '''Clon #210''': '''<font color="#0000FF">Delorean</font>'''<br />
* '''Modelo''': Prusa i3 box modificada<br />
* '''Autor''': Jose Julio<br />
* '''Lugar''': Tenerife<br />
* '''Impresora progenitora''': Esther píscole<br />
* '''Generación''': 4<br />
* '''Nacimiento''': 12/05/2013<br />
* '''Electrónica''': RAMPS 1.4<br />
* '''Firmware''': Marlin<br />
* '''Hot-End''': FaryNozzle 2.0<br />
|<center>[[File:Jj_perfil.jpg|100px]]</center><br />
|-------------<br />
| <center>[[File:PrintrBot_cableada.jpg|150px]]</center> <br />
|<br />
* '''Clon #211''': '''<font color="#0000FF">Chubaca</font>'''<br />
* '''Modelo''': PrintrBot<br />
* '''Autor''': Enrique Rodríguez<br />
* '''Lugar''': Madrid<br />
* '''Impresora progenitora''': Paclemaker<br />
* '''Nacimiento''': 16/05/2013<br />
* '''Electrónica''': Sanguinololu 1.3a<br />
* '''Firmware''': Marlin<br />
* '''Hot-End''': Polaco<br />
|<center> [[File:3Dchewie.jpg|150px]]</center><br />
|-------------<br />
| <center>[[File:Obras.jpg|150px]]</center> <br />
|<br />
* '''Clon #212''': '''<font color="#0000FF">Destriers</font>'''<br />
* '''Modelo''': Prusa I2<br />
* '''Autor''': Jose Raul Montero<br />
* '''Lugar''': Málaga<br />
* '''Impresora progenitora''': [[Clone wars: Telchar|Telchar]]<br />
* '''Nacimiento''': 18/05/2013<br />
* '''Electrónica''': RAMPS 1.4<br />
* '''Firmware''': Sprinter Superestable<br />
* '''Hot-End''': Chino<br />
|<center> [[File:Obras.jpg|150px]]</center><br />
<br />
|--------<br />
| <center>[[File:Corbusi.jpg|250px]]</center> <br />
|<br />
* '''Clon #213''': '''<font color="#0000FF">Le Corbu</font>'''<br />
* '''Modelo''': Prusa I2<br />
* '''Autor''': Alberto Martinez <br />
* '''Lugar''': Zaragoza<br />
* '''Impresora progenitora''': [[Clone wars:Impresora Geek-X-truder|Geek-X-Truder]]<br />
* '''Nacimiento''': 25/05/2013<br />
* '''Electrónica''': RAMPS 1.4<br />
* '''Firmware''': Sprinter Superestable<br />
* '''Hot-End''': FaryNozzle 2.0<br />
<br />
|<center> [[File:Corbusier.jpg|150px]]</center><br />
|<br />
|-------------<br />
|<center>[[File:RoyBatty.JPG|250px]]</center><br />
|<br />
* '''Clon #214''': '''<font color="#0000FF">Roy Batty</font>'''<br />
* '''Modelo''': Prusa I2<br />
* '''Autor''': Juan Moreno<br />
* '''Lugar''': Vitoria<br />
* '''Impresora progenitora''': [[Clone wars:Impresora R5D5|R5D5]]<br />
* '''Nacimiento''': 08/05/2013<br />
* '''Electrónica''': RAMPS 1.4<br />
* '''Firmware''': Sprinter Superestable<br />
* '''Hot-End''': SPBudas<br />
<br />
|<center> [[File:RoyBatty2.JPG|150px]]</center><br />
|<br />
|-------------<br />
|<center>[[File:Bolisa.JPG|250px]]</center><br />
|<br />
* '''Clon #215''': '''<font color="#0000FF">Bolisa</font>'''<br />
* '''Modelo''': Prusa I2<br />
* '''Autor''': Cipri Ballester<br />
* '''Lugar''': Zaragoza<br />
* '''Impresora progenitora''': [[Clone wars:Impresora Giskard|Giskard]]<br />
* '''Nacimiento''': 29/04/2013<br />
* '''Electrónica''': Arduino MEGA / RAMPS 1.4<br />
* '''Firmware''': Sprinter Superestable<br />
* '''Extrusor''': Jonaskuehling extruder<br />
* '''Hot-End''': FaryBudas<br />
<br />
| <center> [[File:galaxian.jpg|250px]]</center><br />
|<br />
|-------------<br />
| <center>[[File:OrionNoB.jpg|250px]]</center><br />
|<br />
* '''Clon #216''': '''<font color="#0000FF">Orion</font>'''<br />
* '''Modelo''': Prusa Air 2<br />
* '''Autor''': Daniel Lopez<br />
* '''Lugar''': Madrid<br />
* '''Impresora Progenitora''': [[Impresora Progenitora: Demiurgo|Demiurgo]] y [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]]<br />
* '''Nacimiento''': '''30/Septiembre/2012'''<br />
* '''Electrónica''': sanguinololu<br />
* '''Firmware''': Sprinter <br />
* '''Extrusor''': Jonaskuehling extruder<br />
* '''Hot-End''': J-head<br />
<br />
<br />
| <center> [[File:NebOrion.jpg|250px]]</center><br />
|<br />
|---------<br />
| <center>[[File:Clon-217-SpongeBot_Reloaded_.png|200px]]</center> <br />
|<br />
* '''Clon #218''': <font color="#0000FF">SpongeBot Reloaded</font><br />
* '''Lugar''': A coruña<br />
* '''Familia''': Prusa i3<br />
* '''Generación''': 6<br />
* '''Autor''': Alejandro Taracido (TCRobotics)<br />
* '''Impresora progenitora''': Clon #187: Super 8<br />
* '''Nacimiento''': 01/Jun/2013<br />
* '''Descendencia''': Próximamente!<br />
| <center>[[File:Spongebot-logo.png| 150px]]</center> <br />
|---------<br />
<br />
|---------<br />
| <center>[[File:Prusai2sprint.jpg|250px]]</center> <br />
|<br />
* '''Clon #219''': <font color="#0000FF">Sprintfield</font><br />
* '''Lugar''': Sevilla<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 4º<br />
* '''Autor''': Alvaro Luna (AlunaCW)<br />
* '''Impresora progenitora''': Clon #30: X-Wing y Clon #55: Y-Wing<br />
* '''Nacimiento''': 31/Mayo/2013<br />
* '''Descendencia''': Próximamente!<br />
* '''Electrónica''': ARDUINO MEGA / RAMPS 1.4<br />
* '''Firmware''': Marlin <br />
* '''Extrusor''': Jonaskuehling extruder<br />
* '''Hot-End''': J-head V<br />
| <center>[[File:Sprintfield.jpg| 150px]]</center> <br />
|---------<br />
| <center>[[File:modificado.jpg| 250px]]</center> <br />
|<br />
* '''Clon #220''': <font color="#0000FF">Geth</font><br />
* '''Lugar''': Sabadell<br />
* '''Familia''': Prusa i3<br />
* '''Generación''': 4<br />
* '''Autor''': José María Garrocho (Jmgarrocho)<br />
* '''Impresora progenitora''': Clon #135: hydra<br />
* '''Nacimiento''': 09/Junio/2013<br />
* '''Descendencia''': Próximamente!<br />
* '''Electrónica''': ARDUINO MEGA / RAMPS 1.4<br />
* '''Firmware''': Marlin <br />
* '''Extrusor''': Jonaskuehling extruder<br />
* '''Hot-End''': E3D-v4.1<br />
| <center>[[File:|291930101503003238316458581109164480429571176420903n.jpg 150px]]</center> <br />
|---------<br />
| <center>[[File:IG-88.jpg|150px]]</center> <br />
|<br />
* Nombre: '''#221 IG-88'''<br />
* Lugar: Oleiros<br />
* Tipo: Prusa i2<br />
* Generación: 5ª<br />
* Autor: Xarpe Serpe<br />
* Impresora progenitora: SpongeBot [Alejandro Taracido (TCRobotics)]<br />
* '''<font color="#0000FF">Estado:</font>'''<br />
**Aprendiendo los trucos de la impresión.<br />
**Pensando sistema de ajuste a mesa no horizontal.<br />
**Iniciando impresión de piezas I3 para donación.<br />
| <center> [[File:IG-88.jpg|150px]]</center><br />
|-------------<br />
| <center>[[File:Clon_nono.jpg|150px]]</center> <br />
|<br />
* '''Clon #222''': <font color="#0000FF">Nono</font><br />
* '''Lugar''': Alicante<br />
* '''Modelo''': Prusa i3 <br />
* '''Generación''': 4ª<br />
* '''Autor''': Paco Gallud<br />
* '''Impresora progenitora''': ROBOTIJO<br />
* '''Nacimiento''': 10/6/2013<br />
* '''Electrónica''': Ramps 1.4<br />
* '''Firmware''': Marlin<br />
* '''Hot-End''': E3D<br />
| <center>[[File:nono.jpg|150px]]</center> <br />
|---------<br />
| <center>[[File:TelarBot1.jpg|220px]]</center> <br />
|<br />
* '''Clon #223''': <font color="#0000FF">TelarBot</font><br />
* '''Lugar''': Zamora-Soria<br />
* '''Modelo''': Prusa i2 <br />
* '''Generación''': 4ª<br />
* '''Autor''': Julian Garcia<br />
* '''Impresora progenitora''': Esterpiscole<br />
* '''Nacimiento''': 07/6/2013<br />
* '''Electrónica''': Ramps 1.4<br />
* '''Firmware''': Sprinter<br />
* '''Hot-End''': PrusaNozzle<br />
| <center>[[File:Telarbotplaca.jpg|280px]]</center> <br />
|---------<br />
| <center>[[File:Gutemberg.jpg|220px]]</center> <br />
|<br />
* '''Clon #224''': <font color="#0000FF">Gutenberg</font><br />
* '''Lugar''': Zaragoza (Arduteka)<br />
* '''Modelo''': Prusa IT3 <br />
* '''Generación''': 5ª<br />
* '''Autores''': Javier Montesa, José Luis Poza y Ricardo Pérez<br />
* '''Impresora progenitora''': Gandalf y Geek-x-truder.<br />
* '''Nacimiento''': 18/5/2013<br />
* '''Electrónica''': Sanguinololu 1.3a<br />
* '''Firmware''': Marlin-Marlin v.1<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': BudaschNozzle 2.0<br />
| <center>[[File:Gutenberg.png|280px]]</center> <br />
|---------<br />
| <center>[[File:Imprusora_Filosofal.jpg|220px]]</center> <br />
|<br />
* '''Clon #225''': <font color="#0000FF">Imprusora Filosofal</font><br />
* '''Lugar''': Real Cortijo de San Isidro<br />
* '''Modelo''': Prusa IT3 <br />
* '''Autores''': Sergio MC (Gracias a Nines)<br />
* '''Impresora progenitora''': Giskard.<br />
* '''Nacimiento''': 18/6/2013<br />
* '''Electrónica''': Ramps 1.4<br />
* '''Firmware''': Marlin-Marlin v.1<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': PrusaNozzle 0.1<br />
| <center>[[File:Logo_Filosofal.png]]</center> <br />
|---------<br />
| <center>[[File:Bender_1.0.JPG|200px]]</center><br />
|<br />
* '''Clon #227''': <font color="#0000FF">Bender 1.0</font><br />
* '''Lugar''': Huelva<br />
* '''Modelo''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] (iteración 2)<br />
* '''Generación''': 5ª<br />
* '''Autor''': Iván Ramírez Beltrán<br />
* '''Impresora progenitora''': Giskard (Generación 4ª)<br />
** '''Nacimiento''': 29/06/2013<br />
** '''Electrónica''': Arduino Mega + Ramps 1.4<br />
** '''Firmware''': Sprinter<br />
** '''Extrusor''': Jonaskuehling<br />
** '''Hot-End''': Buda-style v1.2<br />
| <center>[[File:Bender_aplausos.jpg|250px]]</center><br />
|---------<br />
| <center>[[File:DELOREAN-QueNoWert-225x300.jpeg ]]</center><br />
|<br />
* '''Clon #229''' : <font color="#0000FF"> deLOReAn </font><br />
* '''Lugar''' : Lora del Rio. Sevilla. <br />
* '''Modelo''' : Prusa Air 2 ( Kit LEAPto3D)<br />
* '''Generación''': 5ª (Duda)<br />
* '''Autor''' : Enrique González Lafuente (QueNoWert)<br />
* '''Impresora progenitora''': Desconocida<br />
** '''Nacimiento''' : 17/06/2013<br />
** '''Electrónica''': Sanguinololu 1.3b y Pololus<br />
** '''Firmware''' : Sprinter y Marlin (GNU/Linux Linux Mint)<br />
** '''Software''' : Printun - Cura -host+ Skeinforge (GNU/Linux Linux Mint)<br />
** '''Extrusor''' : Jonaskuehling Jonaskuehling 3mm<br />
** '''Hot-End''' : J-Head MKV 3mm, boquilla: 0,5mm<br />
| <center>[[File:000000.jpg]]</center><br />
|---------<br />
| <center>[[File:00000.jpg ]]</center><br />
|<br />
* '''Clon #230''' : <font color="#0000FF"> Malospelos </font><br />
* '''Lugar''' : San Sebastian de los Reyes. Madrid. <br />
* '''Modelo''' : Prusa IT 2 <br />
* '''Generación''': 3ª o 4ª (piezas compradas en reclone3d por tanto hija de xwing o Ywing)<br />
* '''Autor''' : Felix Arias<br />
* '''Impresora progenitora''': Reclone3d Farm<br />
** '''Nacimiento''' : 2/07/2013<br />
** '''Electrónica''': Arduino Mega + Ramps 1.4<br />
** '''Firmware''' : Sprinter<br />
** '''Extrusor''' : Jonaskuehling 3mm<br />
** '''Hot-End''' : J-Head Hispania 3mm, boquilla: 0,5mm<br />
| <center>[[File:malospelos.jpg]]</center><br />
|---------<br />
| <center>[[File:Cl4p-tp.jpg ]]</center><br />
|<br />
* '''Clon #231''' : <font color="#0000FF"> CL4P-TP </font><br />
* '''Lugar''' : Barcelona ciudad <br />
* '''Modelo''' : Prusa IT 2 <br />
* '''Generación''': 3ª<br />
* '''Autor''' : Martí Serra (XvapX)<br />
* '''Impresora progenitora''': Desconocido<br />
** '''Nacimiento''' : 15/06/2013<br />
** '''Electrónica''': Arduino Mega + Ramps 1.4<br />
** '''Firmware''' : Marlin<br />
** '''Extrusor''' : Jonaskuehling 3mm<br />
** '''Hot-End''' : Budaschnozzle 1.2 3mm, boquilla: 0,5mm<br />
| <center>[[File:claptrap.jpg]]</center><br />
|---------<br />
|<center>[[File:forrata2.jpg ]]</center><br />
|<br />
* '''Clon #232''' : <font color="#0000FF"> FORRATA </font><br />
* '''Lugar''' : Madrid<br />
* '''Modelo''' : Prusa IT 2 <br />
* '''Generación''': 3ª<br />
* '''Autor''' : David Alonso (DAlonsoCW)<br />
* '''Impresora progenitora''': Mardan<br />
** '''Nacimiento''' : 06/07/2013<br />
** '''Electrónica''': Arduino Mega + Ramps 1.4<br />
** '''Firmware''' : Sprinter superstable<br />
** '''Extrusor''' : Jonaskuehling 3mm<br />
** '''Hot-End''' : Budas chino 3mm, boquilla: 0,4mm<br />
|<center>[[File:Tesla3.jpg ]]</center><br />
|---------<br />
|<center>[[File:prisma.jpg|150px]]</center><br />
|<br />
* '''Clon #233''' : <font color="#0000FF"> Prisma IT3 </font><br />
* '''Lugar''' : Malaga<br />
* '''Modelo''' : Prusa IT 3 <br />
* '''Generación''': 4ª<br />
* '''Autor''' : prisma_cw<br />
* '''Impresora progenitora''': Telchar<br />
* '''Nacimiento''' : 15/07/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Sprinter superstable<br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : JHead Hispania 0.5<br />
|<center>[[File:avatar_prisma.jpg|250px]]</center><br />
|---------<br />
|<center>[[File:EWOK IT2.JPG|150px]]</center><br />
|<br />
* '''Clon #234''' : <font color="#0000FF"> EWOK </font><br />
* '''Lugar''' : Girona<br />
* '''Modelo''' : Prusa IT 2 <br />
* '''Autor''' : Sushimarc<br />
* '''Impresora progenitora''': Manuel Sanchez Amores<br />
* '''Nacimiento''' : 06/07/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Sprinter superstable<br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : JHead MK4 MKIV <br />
|<center>[[File:Ewok.jpg|250px]]</center><br />
|---------<br />
|<center>[[File:Solo_001_Thumb.jpg|250px]]</center><br />
|<br />
* '''Clon #235''' : <font color="#0000FF"> Solo </font><br />
* '''Lugar''' : Girona<br />
* '''Modelo''' : Prusa i2 <br />
* '''Autor''' : Josep Ponce [JponceCW] [tra7montana]<br />
* '''Impresora progenittora''': placeMAKER<br />
* '''Nacimiento''' : 16/07/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Sprinter superstable<br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : Budaschnozzle 1.2 3mm, boquilla: 0,5mm <br />
*[http://www.reprap.org/wiki/Clone_wars:Impresora_J%26JSolo MÁS INFORMACIÓN]<br />
|<center>[[File:Solo_Construccio_AAA_CubCalibracio.jpg|250px]]</center><br />
|---------<br />
|<center>[[File:TATU.jpg|250px]]</center><br />
|<br />
* '''Clon #236''' : <font color="#0000FF"> TATU</font><br />
* '''Lugar''' : Girona<br />
* '''Modelo''' : Prusa IT 3 <br />
* '''Autor''' : Tatuin<br />
* '''Impresora progenitora''': Desconocido<br />
* '''Nacimiento''' : 25/06/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Sprinter superstable<br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : JHead MK4 MKIV <br />
|<center>[[File:TATU.jpg|250px]]</center><br />
|---------<br />
|<center>[[A falta de foto]]</center><br />
|<br />
* '''Clon #237''' : <font color="#0000FF"> TATU</font><br />
* '''Lugar''' : Baena (Córdoba)<br />
* '''Modelo''' : Prusa IT 3 <br />
* '''Autor''' : Iniciativas 3d<br />
* '''Impresora progenitora''': Desconocido<br />
* '''Nacimiento''' : 19/07/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : G3D Budas style <br />
|<center>[[File:I3dgrande.png]]</center><br />
|---------<br />
|<center>[[A falta de foto]]</center><br />
|<br />
* '''Clon #238''' : <font color="#0000FF"> FrankenPrusa</font><br />
* '''Lugar''' : Burgos<br />
* '''Familia''' : Mendel Prusa Iteración 2<br />
* '''Generación''' : 6<br />
* '''Autor''' : Juan García Rodríguez / David Mayor Fernandez<br />
* '''Impresora progenitora''': VENTURPRINT<br />
* '''Nacimiento''' : 01/06/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling V5/V6 3mm<br />
* '''Hot-End''' : Polaco 0.5mm <br />
|<center>[[A falta de foto]]</center><br />
|---------<br />
|<center>[[File:prusanoa.jpg|250px]]</center><br />
|<br />
* '''Clon #239''' : <font color="#0000FF"> NOA Prusa</font><br />
* '''Lugar''' : Zamora<br />
* '''Familia''' : Mendel Prusa Iteración 2<br />
* '''Generación''' : 5<br />
* '''Autor''' : Adolfo Castaño<br />
* '''Impresora progenitora''': Lucas Clon<br />
* '''Nacimiento''' : 29/06/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Sprinter <br />
* '''Extrusor''' : Jonaskuehling V5/V6 3mm<br />
* '''Hot-End''' : J-Head MKV 3mm, boquilla: 0,5mm<br />
|<center>[[File:clonelucasyyo.jpg|250px]]</center><br />
|---------<br />
|<center>[[File:ImprusinhoConPeza.jpg|250px]]</center><br />
|<br />
* '''Clon #240''' : <font color="#0000FF">Imprusiño</font><br />
* '''Lugar''' : CPI de Atios - Valdoviño (A Coruña)<br />
* '''Familia''' : Prusa Iteración 2<br />
* '''Generación''' : 2<br />
* '''Autor''' : Equipo Imprusiño: Iván, Kevin, Pablo, María, Rita, Cris e Lydia<br />
* '''Impresora progenitora''': PacleMaker<br />
* '''Nacimiento''' : 03/05/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Sprinter <br />
* '''Extrusor''' : Jonaskuehling V5/V6 3mm<br />
* '''Hot-End''' : PrusaNozzle 0.4<br />
|<center>[[File:EquipoImprusinho.jpg|300px]]</center><br />
|---------<br />
|<center>[[File:DSC_0417.jpg|300px]]</center><br />
|<br />
* '''Clon #241''' : <font color="#0000FF">Tantive IV</font><br />
* '''Lugar''' : Astigarraga, Gipuzkoa'''<br />
* '''Familia''' : Prusa Iteración 2'''<br />
* '''Autor''' : Victor Barahona - Sir Galaxy[[User:VbarahonaCW]]<br />
* '''Impresora progenitora''': JAR JAR 140<br />
* '''Nacimiento''' : 20/7/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling V5/V6 3mm<br />
* '''Hot-End''' : J-Head MKV 3mm, boquilla: 0,5mm<br />
|<center>[[File:Tantive4.jpg|300px]]</center> <br />
|---------<br />
|<center>[[File:2013-07-27-1660.jpg|300px]]</center><br />
|<br />
* '''Clon #242''' : <font color="#0000FF">PrusaMod</font><br />
* '''Lugar''' : Santa Cruz de Bezana, Cantabria'''<br />
* '''Familia''' : Prusa Iteración 2'''<br />
* '''Autor''': Vicente Centeno [[User:Chentinox | (ChentinoX)]]<br />
* '''Impresora progenitora''': Toxina<br />
* '''Nacimiento''' : 30/6/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Marlin<br />
* '''Extrusor''' : Jonaskuehling V5<br />
* '''Hot-End''' : J-Head MKV 3mm, boquilla: 0,5mm<br />
|<center>[[File:2013-07-27-1654.jpg|300px]]</center> <br />
|---------<br />
|<center>[[File:General grevious prusa II.jpg|300px]]</center><br />
|<br />
* '''Clon #243''' : <font color="#0000FF"> General Grevious Prusa II</font><br />
* '''Lugar''' : Granada'''<br />
* '''Familia''' : Prusa Iteración II'''<br />
* '''Autor''': Juan Carlos Joya Clares <br />
* '''Nacimiento''' : Nacimiento Oficial 3 de Julio de 2013 Conferencia de Granada Imprusa<br />
* '''Electrónica''': Sanguinololu 1.3b + Pololus<br />
* '''Firmware''' : Sprinter <br />
* '''Hot-End''' : J-Head Hispania, boquilla: 0,5mm<br />
* '''Impresora progenitora''': GrBot3D http://www.reprap.org/wiki/Clone_Wars:_Impresora_GrBot3D<br />
* '''[[Clone Wars: General_Grevious|MÁS INFORMACIÓN]]<br />
|<center>[[File:General.jpg|300px]]</center> <br />
|---------<br />
|<center>[[File:TalaPrusa.png|300px]]</center><br />
|<br />
* '''Clon #244''' : <font color="#0000FF"> TalaPrusa</font><br />
* '''Lugar''' : Talavera de la Reina (Toledo)<br />
* '''Familia''' : Mendel Prusa Iteración 3<br />
* '''Autor''' : Antonio Navarro<br />
* '''Nacimiento''' : 11/08/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : Budaschnozzle 2.0 3mm, boquilla: 0,35mm <br />
|<center>[[A falta de foto]]</center><br />
|---------<br />
|<center>[[File:K-9-YA.JPG|300px]]</center><br />
|<br />
* '''Clon #245''' : <font color="#0000FF"> K-9-YA</font> https://groups.google.com/forum/?fromgroups=#!topic/asrob-uc3m-impresoras-3d/Ti6OHaZ1szc<br />
* '''Lugar''' : Burgos<br />
* '''Familia''' : Mendel Prusa Iteración 3<br />
* '''Autor''' : Manuel Lucio<br />
* '''Nacimiento''' : 22/08/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : Prusa Nozzle 4mm<br />
* '''Impresora progenitora''': Ironhide 3.0 http://www.reprap.org/wiki/File:IronHide30.jpg<br />
|<center>[[File:K-9-YA-Logo.jpg|300px]]</center><br />
|---------<br />
|<center>[[File:Paxpan3dimp.jpg|260px]]</center><br />
|<br />
* '''Clon #247''' : <font color="#0000FF"> Paxpan 3D</font><br />
* '''Lugar''' : Artziniega (Alava)<br />
* '''Familia''' : Mendel Prusa Iteración 3<br />
* '''Autor''' : Guillermo Velasco (GvelascoCW)<br />
* '''Nacimiento''' : 25 de Agosto de 2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4 <br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling<br />
* '''Hot-End''' : Buda style v1.2, boquilla: 0,5mm <br />
<br />
|<center>[[File:Mattpaxprn000.jpg|200px]]</center> <br />
|---------<br />
|<center>[[File:Obras.jpg|250px]]</center><br />
|<br />
* '''Clon #248''': <font color="#0000FF">B.E.N</font><br />
* '''Lugar''': Madrid <br />
* '''Modelo''': Prusa iteration 2<br />
* '''Autor''': Rafael <br />
* '''Impresora progenitora''': Mardan e Hija<br />
** '''Nacimiento''': 20/08/2013<br />
** '''Electrónica''': Ramps 1.3<br />
** '''Firmware''': Sprinter <br />
|<center>[[File:B.E.N.jpg|250px]]</center><br />
|---------<br />
|<center>[[File:Winebot2.png|250px]]</center><br />
|<br />
* '''Clon #249''' : <font color="#0000FF"> Winebot</font><br />
* '''Lugar''' : Jumilla (Murcia)<br />
* '''Modelo''' : Prusa IT 3 <br />
* '''Autor''' : Pedro Perez<br />
* '''Impresora progenitora''': Desconocido<br />
* '''Nacimiento''' : 16/08/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : J-Head 0.4mm<br />
|<center>[[File:Scrat-beer.jpg|250px]]</center><br />
|---------<br />
| <center>[[File:MagicMirrorPrusa.jpg|250px]]</center><br />
|<br />
* '''Clon #250''' : <font color="#00334FF"> Magic Mirror Prusa</font><br />
* '''Lugar''' : Vilagarcía de Arousa (Pontevedra)<br />
* '''Modelo''' : Prusa IT 2<br />
* '''Autor''' : JpinedoCW (José Pinedo)<br />
* '''Impresora progenitora''': '''<font color="#FF6633">Piezas compradas a Jesmar</font>'''<br />
* '''Nacimiento''' : 26/08/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Repetier-Host<br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : Buddaschnozzle 2.0 (punta 0.5mm)<br />
* '''Inicio Proyecto''' : 15/07/2013<br />
* '''<font color="#0000FF">Estado:</font>'''<br />
*Imprimiendo su primer clon (una iteración 3 que aún no está registrada en la wiki).<br />
* '''E-mail''': [elmaspinedo@gmail.com]<br />
|<center> [[File:MAGIC-MIRROR-PRUSA.gif|250px]]</center><br />
|------------<br />
| <center>[[File:The_Red_Baron.jpg|250px]]</center> <br />
|<br />
* Clon #251: '''Red Baron'''<br />
* Inicio proyecto: '''10/04/2013'''<br />
* Lugar: '''Madrid'''<br />
* Tipo: '''Prusa i3'''<br />
* Impresora Progenitora: '''Black Knight'''<br />
* '''Nacimiento''' : 01/09/2013<br />
* Autor : '''El equipo Almodóvar''' <br />
| <center>[[File:RedBaron_Avatar.png|200px]]</center> <br />
|------------<br />
| <center>[[File:IMAG0691.jpg|250px]]</center> <br />
|<br />
* Clon #252: '''RedSkin'''<br />
* Inicio proyecto: '''01/01/2013'''<br />
* Lugar: '''Sevilla'''<br />
* Tipo: '''Prusa IT2'''<br />
* Impresora Progenitora: '''Zoltanthor'''<br />
| <center></center> <br />
|---------<br />
|<center>[[File:BobMarlin.jpg|250px]]</center><br />
|<br />
* '''Clon #253: '''BobMarlin'''<br />
* '''Lugar''' : Reus (Tarragona)<br />
* '''Familia''' : Mendel Prusa Iteración 3<br />
* '''Autor''' : Robertmika<br />
* '''Nacimiento''' : 17/09/2013<br />
* '''Impresora progenitora''': Desconocido<br />
* '''Electrónica''': Beduino + Ramps 1.4<br />
* '''Firmware''' : Marlin <br />
* '''Hot-End''' : J-Head<br />
|<center>[[File:Bob_marlin_Logo.JPG|250px]]</center><br />
|---------<br />
|<center>[[File:Kyle_22-08-2013.jpg|250px]]</center><br />
|<br />
* '''Clon #254: '''Kyle'''<br />
* '''Lugar''' : Narón (Galicia)<br />
* '''Familia''' : Mendel Prusa Iteración 2<br />
* '''Autor''' : Alejandro Nieto<br />
* '''Nacimiento''' : 22/08/2013<br />
* '''Impresora progenitora''': Desconocido<br />
* '''Electrónica''': Mega 2540 + Ramps 1.4<br />
* '''Firmware''' : Sprinter 1.3.22 <br />
* '''Hot-End''' : E3D-v5<br />
|<center></center><br />
|---------<br />
|<center>[[File:Boneca.png|250px]]</center><br />
|<br />
* '''Clon #255: '''Boneca'''<br />
* '''Lugar''' : Carballo (Galicia)<br />
* '''Familia''' : Mendel Prusa Iteración 3<br />
* '''Autor''' : Pablo Blanco<br />
* '''Nacimiento''' : 23/09/2013<br />
* '''Impresora progenitora''': Super 8<br />
* '''Electrónica''': Mega 2540 + Ramps 1.4<br />
* '''Firmware''' : Marlyn<br />
* '''Hot-End''' : J-head<br />
|<center></center><br />
|---------<br />
|<center>[[File:Herbie_asimov_256.png|250px]]</center><br />
|<br />
* '''Clon #256''': Herbie<br />
* '''Lugar''' : Zaragoza<br />
* '''Familia''' : Prusa Iteración 3 box<br />
* '''Autor''' : Asimov<br />
* '''Nacimiento''' : 25/09/2013<br />
* '''Impresora progenitora''': Giskard<br />
* '''Electrónica''': Mega 2560 + Ramps 1.4<br />
* '''Firmware''' : Sprinter<br />
* '''Hot-End''' : FaryNozzle<br />
|<center></center><br />
|---------<br />
| <center>[[File:prusamendel_gengiskhan.JPG|150px]]</center> <br />
|<br />
* '''Clon #258''': Genghis Khan<br />
* Lugar: Madrid EUITT UPM<br />
* Tipo: [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* Autor: [http://www.semanasphera.es Asociación de electrónica]<br />
* Nacimiento: '''10/Jun/2013'''<br />
* Impresora progenitora: [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R2-reloaded R2-RELOADED]<br />
* Electrónica: [http://reprap.org/wiki/Generation_7_Electronics Gen7 homemade 20MHz]<br />
* Firmware: [http://reprap.org/wiki/Repetier-Firmware Repetier]<br />
* Extrusor: [http://reprap.org/wiki/Wade%27s_Geared_Extruder Wade's extruder] (plástico de 3mm)<br />
* Hot-End: Budas v1.2<br />
*[http://www.semanasphera.es/?q=es/node/6 MÁS INFORMACIÓN]<br />
|<br />
<center>[[File:Aetel.png|150px]]</center><br />
|---------<br />
| <center>[[File:prusai3_thor.JPG|150px]]</center> <br />
|<br />
* '''Clon #259''': Thor<br />
* Lugar: Valencia<br />
* Tipo: [[Prusa i3/es|Prusa i3]]<br />
* Autor: juvaber<br />
* Nacimiento: '''16/Sep/2013'''<br />
* Impresora progenitora: #165: Goliath<br />
* Electrónica: Mega 2560 + Ramps 1.4<br />
* Firmware: [http://reprap.org/wiki/Repetier-Firmware Repetier]<br />
* Extrusor: Jonaskuehling 3mm<br />
* Hot-End: JHead 3mm-0.5<br />
* [[Clone Wars: Thor|Más información]]<br />
|<br />
<center>[[File:Logo_Thor_Hammer.jpg|150px]]</center><br />
|--------<br />
| <center>[[File:Gladiator.jpg|150px]]</center> <br />
|<br />
* '''Clon #262''': <font color="#0000FF">Gladiator</font><br />
* '''Lugar''': A Coruña<br />
* '''Familia''': Prusa i3<br />
* '''Generación''': 6<br />
* '''Autor''': Daniel López García (dalogax)<br />
* '''Impresora progenitora''': Clon #187: Super 8<br />
* '''Nacimiento''': 16/Sept/2013<br />
* '''Descendencia''': Próximamente!<br />
| | <center>[[File:Gladiatorlogo.JPG|150px]]</center><br />
|<br />
<center>[[File:jpg|150px]]</center><br />
|--------<br />
| <center>[[File:|150px]]</center> <br />
|<br />
* '''Clon #277''': <font color="#0000FF">PrintexD</font><br />
* '''Lugar''': Badajoz<br />
* '''Familia''': Prusa i3<br />
* '''Nacimiento''': 13/Oct./2013<br />
* '''Autor''': Sebastian Gallardo<br />
* '''Impresora progenitora''': Clon #187: Super 8<br />
* '''Electrónica:''' Mega 2560 + Ramps 1.4<br />
* '''Firmware:''' Marlin<br />
* '''Extrusor:''' Jonaskuehling<br />
* '''Hot-End:''' Budas chino<br />
* '''Descendencia''': Próximamente!<br />
|<br />
<center>[[File:|150px]]</center><br />
|--------<br />
| <center>[[File:SilviBot3D.jpg]]</center> <br />
|<br />
* '''Clon #278''': <font color="#0000FF">SilviBot3D</font><br />
* '''Lugar''': Cartaya (Huelva)<br />
* '''Familia''': Prusa i3<br />
* '''Nacimiento''': 15/Oct./2013<br />
* '''Autor''': Rubén Pedraza<br />
* '''Impresora progenitora''': La conjunta<br />
* '''Electrónica:''' Mega 2560 + Ramps 1.4<br />
* '''Firmware:''' Marlin<br />
* '''Extrusor:''' Jonaskuehling<br />
* '''Hot-End:''' JHead 3mm-0.5 (Proximamente un Catnozzle)<br />
* '''Descendencia''': Próximamente!<br />
|<br />
<center>[[File:|150px]]</center><br />
|--------<br />
| <center>Proximamente</center> <br />
|<br />
* '''Clon #280''': <font color="#0000FF">WhitePrawn</font><br />
* '''Lugar''': Lepe (Huelva)<br />
* '''Familia''': Prusa i3<br />
* '''Nacimiento''': 18/Oct./2013<br />
* '''Autor''': Manuel Fernández<br />
* '''Impresora progenitora''': Goliath<br />
* '''Electrónica:''' Mega 2560 + Ramps 1.4<br />
* '''Firmware:''' Marlin<br />
* '''Extrusor:''' Jonaskuehling<br />
* '''Hot-End:''' E3D v.5.1 0.3mm (all metal hotend)<br />
* '''Descendencia''': Próximamente!<br />
|<br />
<center>[[File:|150px]]</center><br />
|--------<br />
| <center>[[File:element_115.jpg|250px]]</center> <br />
|<br />
* Clon #282: '''Element 155'''<br />
* Inicio proyecto: '''25/10/2013'''<br />
* Lugar: '''Santander'''<br />
* Tipo: '''Prusa i3'''<br />
* Impresora Progenitora: '''Rewok'''<br />
* '''Nacimiento''' : 27/10/2013<br />
* Autor : '''LUCAS RepRapZ.com''' <br />
| <center>[[File:element_115.png|250px]]</center><br />
|--------<br />
| <center>[[File:Pluton1.jpg|150px]]</center> <br />
|<br />
* '''Clon #283:''' PLUTON<br />
* '''Lugar:''' Ansoain (Navarra)<br />
* '''Tipo:''' Printrbot V2<br />
* '''Impresora Progenitora:''' Reclone 3d´s Farm<br />
* '''Nacimiento:''' 18/10/2013<br />
* '''Electrónica:''' Mega 2560 + Ramps 1.4<br />
* '''Firmware:''' Sprinter<br />
* '''Hot-End:''' J-Head MK-V Hispania<br />
* '''Autor :''' Eduardo Múgica <br />
| <center>[[File:Pluton2.png|150px]]</center> <br />
|--------<br />
| <center>[[File:Impresora_Torcal.jpg|150px]]</center> <br />
|<br />
* '''Clon #290:''' TORCAL<br />
* '''Lugar:''' Alcalá de Henares (Madrid)<br />
* '''Tipo:''' BCN3D<br />
* '''Impresora Progenitora:''' Rewok<br />
* '''Nacimiento:''' 20/10/2013<br />
* '''Electrónica:''' Mega 2560 + Ramps 1.4<br />
* '''Firmware:''' Marlin<br />
* '''Hot-End:''' E3D<br />
* '''Autor :''' Paco Ríos<br />
| <center>[[File:Obras.jpg|150px]]</center> <br />
|--------<br />
| <center>[[File:The Purpple Angel2.JPG|150px]]</center> <br />
|<br />
* '''Clon #292''': <font color="#0000FF">The Purpple Angel</font><br />
* '''Lugar''': Vera (Almería)<br />
* '''Familia''': Prusa i3<br />
* '''Nacimiento''': 16/Oct./2013<br />
* '''Autor''': Jose Antonio Pérez Caparrós<br />
* '''Impresora progenitora''': [http://reprap.org/wiki/Clone_wars:_Ronqu%C3%ADo/es Ronquío Clon 133]<br />
* '''Electrónica:''' Mega 2560 + Ramps 1.4<br />
* '''Firmware:''' Marlin<br />
* '''Extrusor:''' Jonaskuehling<br />
* '''Hot-End:''' Magma 3mm-0.5<br />
* '''Descendencia''': Próximamente!<br />
|<br />
<center>[[File:Logo TPA.jpg|150px]]</center><br />
|--------<br />
| <center>[[File:mAka.jpg|200px]]</center><br />
|<br />
* '''Clon #295''': '''<font color="#006666">mAka</font>'''<br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': Prusa entre i3 e i2 con variaciones<br />
* '''Nacimiento''': 18/Dic/2013<br />
* '''Autor''': sacamantecas<br />
* '''Impresora progenitora''': no tiene, es hija de los árboles<br />
* '''Electrónica''': Arduino 2560 (genuino) + RAMPS 1.4<br />
* '''Firmware''': Marlin con añadidos<br />
* '''Extrusor''': artesanal<br />
* '''Hot-End''': G3D con el refrigerador modificado<br />
* '''Peculiaridades''': parece una Prusa i3 pero tiene el motor X hacia el interior, el eje X de i2, pero con la correa dentada por debajo<br />
* '''Más información''': Hay disponible una '''[https://sites.google.com/site/cosasdeluiso/maka hoja de ruta]''' con precios, fotos, detalles y vídeos.<br />
| <center>[[File:sacamantecas.png|200px]]</center><br />
<br />
|--------<br />
|<center> [[File:Alextrasza.jpg|250px]]</center><br />
|<br />
* '''Clon #296''': '''<font color="#006666">Alextrasza</font>'''<br />
* '''Lugar''': A Coruña<br />
* '''Familia''': [http://www.reprap.org/wiki/P3Steel P3Steel]<br />
* '''Generación''': 7ª <br />
* '''Inicio proyecto''': 14/Oct/2013<br />
* '''Nacimiento''': 16/Dic/2013<br />
* '''Autor''': [http://www.reprap.org/wiki/User:Jbabio Jbabio]<br />
* '''Impresora progenitora''': #256 herbie<br />
* '''Electrónica''': Arduino 2560 (genuino) + RAMPS 1.4 + SmartLCD<br />
* '''Firmware''': Repetier 0.83<br />
* '''Extrusor''': [http://www.thingiverse.com/thing:26817 Prusa i3 Direct Drive Bowden Extruder] de Indieflow<br />
* '''Hot-End''': J-Head MK V-B de Reprapsource.com<br />
|<center> [[File:Alextrasza.jpg|200px]]</center><br />
|--------<br />
|<center> [[File:Ingenio1.0.jpg|250px]]</center><br />
|<br />
* '''Clon #298''': '''<font color="#006666">Ingenio</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': [http://www.reprap.org/wiki/Clone_wars:_Prusa_iteración_3 | Prusa i3]<br />
* '''Generación''': 5ª <br />
* '''Inicio proyecto''': 5/Oct/2013<br />
* '''Nacimiento''': 27/Dic/2013<br />
* '''Autor''': [http://www.reprap.org/wiki/User:Fid | Fid]<br />
* '''Impresora progenitora''': #187: Super 8.<br />
* '''Electrónica''': Arduino 2560 + RAMPS 1.4<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': <br />
* '''Hot-End''': [http://reprap.org/wiki/Aluhotend | Aluhotend] de [http://reprap.org/wiki/User:Thejollygrimreaper | Thejollygrimreaper]<br />
|<center> [[File:Ingenio1.0.jpg|200px]]</center><br />
|--------<br />
|<center> [[File:SUSII.jpg|250px]]</center><br />
|<br />
* '''Clon #302''': '''<font color="#006666">SUSI I</font>'''<br />
* '''Lugar''': Medellin, Colombia<br />
* '''Familia''': [http://reprap.org/wiki/RepStrap Repstrap]<br />
* '''Generación''': 1 <br />
* '''Inicio proyecto''': 10/Sep/2013<br />
* '''Nacimiento''': 27/Dic/2013<br />
* '''Autor''': [http://www.reprap.org/wiki/User:alejoair | Alejandro Cuartas]<br />
* '''Electrónica''': Arduino 2560 + RAMPS 1.4<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Casero<br />
* '''Hot-End''': AllMetal Hotend Casero<br />
|<center> [[File:SUSII.jpg|200px]]</center><br />
|--------<br />
|<center> [[File:Tatooine.jpg|250px]]</center><br />
|<br />
* '''Clon #305''': '''<font color="#006666">Tatooine</font>'''<br />
* '''Lugar''': Barcelona<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) | Prusa i2]<br />
* '''Generación''': 3ª <br />
* '''Inicio proyecto''': 15/Jul/2012<br />
* '''Nacimiento''': 7/Ene/2014<br />
* '''Autor''': Isaac Muro<br />
* '''Impresora progenitora''': #4: Mardan.<br />
* '''Electrónica''': Arduino 2560 + RAMPS 1.4<br />
* '''Firmware''': Sprinter<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': J-Head MK-V<br />
* '''Más información''': [[Clone wars: Impresora Tatooine|Tattoine]]<br />
|<center> [[File:Tatooine.jpg|200px]]</center><br />
|--------<br />
|<center> [[File:Golem.jpg|250px]]</center><br />
|<br />
* '''Clon #307''': '''<font color="#006666">Golem</font>'''<br />
* '''Lugar''': Cuenca<br />
* '''Familia''': P3Steel<br />
* '''Generación''': 2ª <br />
* '''Inicio proyecto''': 15/DIC./2013<br />
* '''Nacimiento''': 10/Ene/2014<br />
* '''Autor''': Pedro Lahuerta<br />
* '''Impresora progenitora''': #228: Proteus.<br />
* '''Electrónica''': Arduino 2560 + RAMPS 1.4<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': CatNozzle<br />
* '''Más información''': [[Clone wars: Impresora Golem|Golem]]<br />
||<center> [[File:Golem.jpg|200px]]</center><br />
|--------<br />
<br />
<br />
|--------<br />
|<center> [[File:aiculina.jpg|250px]]</center><br />
|<br />
* '''Clon #308''': '''<font color="#006666">Aiculina</font>'''<br />
* '''Lugar''': Granada<br />
* '''Familia''': P3Steel<br />
* '''Generación''': 5 <br />
* '''Inicio proyecto''': 10/OCT./2013<br />
* '''Nacimiento''': 04/Ene/2014<br />
* '''Autor''': Juanma (Exodous)<br />
* '''Impresora progenitora''': #120: Exoudina3D.<br />
* '''Electrónica''': Arduino 2560 + RAMPS 1.4<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': Casero tipo J-Head<br />
||<center> [[File:exodous_fire.jpg|200px]]</center><br />
|--------<br />
<br />
|--------<br />
|<center> []</center><br />
|<br />
* '''Clon #309''': '''<font color="#006666">Éireland</font>'''<br />
* '''Lugar''': Ourense<br />
* '''Familia''': PI3 Metacrilato<br />
* '''Generación''': 4<br />
* '''Inicio proyecto''': 10/Ene./2014<br />
* '''Nacimiento''': 14/Ene/2014<br />
* '''Autor''': Cardiak Brain(Éireland)<br />
* '''Impresora progenitora''': #30: X-Wing.<br />
* '''Electrónica''': Arduino 2560 + RAMPS 1.4<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': J-Head Hispania<br />
||<center> []</center><br />
|--------<br />
<br />
|--------<br />
|<center> [[File:Breaking_TAZ.jpg|250px]]</center><br />
|<br />
* '''Clon #312''': '''<font color="#006666">Breaking TAZ</font>'''<br />
* '''Lugar''': Pontevedra<br />
* '''Familia''': TAZ<br />
* '''Generación''': 6 <br />
* '''Inicio proyecto''': 15/AGO./2013<br />
* '''Nacimiento''': 12/Ene/2014<br />
* '''Autor''': Mario Crespo (MCVet)<br />
* '''Impresora progenitora''': #311: Ctrl-Z.<br />
* '''Electrónica''': Printrboard Rev.D<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': Catnozzle<br />
||<center> [[File:Breaking_TAZ.jpg|200px]]</center><br />
|--------<br />
<br />
|--------<br />
|<center> [[File:libelulalogo.png|150px]]</center><br />
|<br />
* '''Clon #315:'''<font color="#004080">'''Tröllslanda (Libelula)'''</font>.<br />
* '''Lugar''': Suecia<br />
* '''Tipo''': Prusa i2<br />
* '''Autor''': Pedro Rivera <br />
* '''Impresora progenitora:''' ""R3"" <br />
* '''Generación''': 4a <br />
**'''Nacimiento''':12/Mar/2012<br />
**'''Electrónica''': Arduino Mega 2560 + Ramps 1.3<br />
**'''Firmware:''' : Sprinter<br />
**'''Hot-End''': Budaschnozzle 1.2a<br />
<br />
|<br />
<center> [[File:libelulalogo.png|150px]]</center><br />
<br />
<br />
|-------------<br />
| <center>[[File:PATUSA.jpg | 150px ]]</center> <br />
|<br />
* '''Clon #317''': <font color="#0000FF">PATUSA</font><br />
* '''Lugar''': Ciudad Real<br />
* '''Familia''': Prusa Iteración 3 CON LCD<br />
* '''Autor''': PATMURT<br />
* '''Impresora progenitora''': Desconocida<br />
* '''Nacimiento''': 18/Ene/2013<br />
*'''Electrónica''': Arduino Mega 2560 + Ramps 1.4<br />
*'''Firmware:''' : Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
*'''Hot-End''': J-Head<br />
<br />
| | <center>[[File:PATUSA_printing.JPG | 150px]]</center> <br />
|-------------<br />
<br />
<br />
|-------------<br />
| <center>[[File:agrobot_foto.jpg | 180px ]]</center> <br />
|<br />
* '''Clon #318''': <font color="#00FF00">AgroBot</font><br />
* '''Lugar''': Cerceda (A Coruña)<br />
* '''Familia''': Prusa Iteración 3 LCD+SD<br />
* '''Autor''': CgendeCW<br />
* '''Impresora progenitora''': Clon #187: Super 8<br />
* '''Nacimiento''': 29/Ene/2014<br />
*'''Electrónica''': Gen7AVR 1.5<br />
*'''Firmware:''' : Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
*'''Hot-End''': Budas chino Getech<br />
<br />
| | <center>[[File:agrobot_logo.jpg | 300px]]</center> <br />
|-------------<br />
| <center>[[File:Sputnik_final.JPG|300px]]</center><br />
|<br />
* '''Clon #319:''' SPUTNIK<br />
* '''Lugar:''' Zamora.<br />
* '''Tipo:''' Prusa i3 single frame.<br />
* '''Autor:''' Héctor Pérez<br />
* '''Nacimiento:''' 14/11/2013<br />
** '''Electrónica:''' Iduino Mega + RAMPS 1.4<br />
** '''Firmware:''' Marlin<br />
** '''Hotend:''' Buda chino<br />
** '''Otros:''' Ventilador de capa fuera del extrusor<br />
| <center>[[File:sputnik_teck.jpg|200px]]</center><br />
|<br />
|-------------<br />
| <center>[[File:CW_Shai-Hulud.jpg | 180px ]]</center> <br />
|<br />
* '''Clon #320''': <font color="#00FF00">Shai-Hulud</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Tantillus<br />
* '''Autor''': Jose M. Martín<br />
* '''Impresora progenitora''': Clon #185: Gort<br />
* '''Nacimiento''': 03/Feb/2014<br />
*'''Electrónica''': RAMPS 1.4<br />
*'''Firmware:''' : Marlin<br />
* '''Extrusor''': Tantillus<br />
*'''Hot-End''': Hotend J-Head "Hispania"<br />
<br />
| | <center>[[File:CW_Shai_Hulud_logo.jpg | 300px]]</center> <br />
|-------------<br />
<br />
|-------------<br />
| <center>[[File:roseta_foto.jpg | 180px ]]</center><br />
|<br />
* '''Clon #321''': <font color="#00FF00”>Roseta</font><br />
* '''Lugar''': DISCA (UPV) Valencia, Spain<br />
* '''Familia''': Prusa Iteración 3<br />
* '''Autor''': David<br />
* '''Impresora progenitora''': Adoptada<br />
* '''Nacimiento''': 29/Ene/2014<br />
*'''Electrónica''': RAMPS 1.4<br />
*'''Firmware:''' : Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
*'''Hot-End''': Budas gallego<br />
| | <center>[[File:roseta_logo.jpg | 300px]]</center><br />
|-------------<br />
<br />
|-------------<br />
| <center>[[File:Clon-323-LMakerXY.jpg|250px]]</center><br />
|<br />
* '''Clon #323''': <font color="#0000FF">LMakerXY</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': CoreXY<br />
* '''Generación'': 3<br />
* '''Autor''': Luis Macías<br />
* '''Impresora progenitora''': Spica<br />
* '''Nacimiento''': 1-Feb-2014<br />
* '''Electrónica''': Sanguinololu 1.3a (Provisional)<br />
* '''Firmware:''' : Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': Leonozzle<br />
* [[Clone wars Impresora LMakerXY|Mas información]]<br />
| <center>[[File:CoreXY.jpg|300px]]</center> <br />
|-------------<br />
<br />
|-------------<br />
| <center>[[File:pruss.jpg | 180px ]]</center><br />
|<br />
* '''Clon #325''': <font color="#00FF00”>Metaprint</font><br />
* '''Lugar''': Cádiz, Spain<br />
* '''Familia''': Prusa Iteración 3<br />
* '''Autor''': Miguelop24<br />
* '''Impresora progenitora''': Desconocida<br />
* '''Nacimiento''': 09/Feb/2014<br />
*'''Electrónica''': RAMPS 1.4<br />
*'''Firmware:''' : Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
*'''Hot-End''': Polaco-nozzle<br />
| <center>[[File:medalla.jpg | 300px]]</center><br />
|-------------<br />
<br />
|-------------<br />
| <center>[[File:Creabot.jpg | 180px ]]</center><br />
|<br />
* '''Clon #330''': <font color="#00FF00”>CreaBot</font><br />
* '''Lugar''': Madrid, Spain<br />
* '''Familia''': Prusa Iteración 3<br />
* '''Autor''': AngelLM<br />
* '''Impresora progenitora''': Desconocida<br />
* '''Nacimiento''': 02/Feb/2014<br />
*'''Electrónica''': RAMPS 1.4<br />
*'''Firmware:''' : Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
*'''Hot-End''': Budas Chino<br />
| <center>[[File:creabot1.png | 180px]]</center><br />
|---<br />
| <center>[[File:I3_stryper.jpg|250px]]</center> <br />
|<br />
* '''Clon #334:''' <font color="#0000FF">'''I3 Stryper'''</font>.<br />
* '''Lugar''': Pamplona<br />
* '''Familia''': [http://www.reprap.org/wiki/Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame Prusa Iteración 3 Single Frame]<br />
* '''Generación''': 7<br />
* '''Autor''': [[User:lokus77|LoKuS77]]<br />
* '''Impresora progenitora''': Madre:baru (Sin inscribir), Abuela: jester (Sin inscribir), Bisabuelas: #39, #134,#90<br />
* '''Nacimiento:''' 10 de Febrero de 2014<br />
* '''Electrónica''': [http://reprap.org/wiki/RAMPS_1.4/es Ramps 1.4]<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': [http://e3d-online.com/E3D-HotEnds/E3D-V5-3mm-Direct-All-Metal-HotEnd E3Dv5 3mm]<br />
* '''Firmware''': [[Marlin]]<br />
* [[Clone_Wars:_Impresora_Stryper |MÁS INFORMACIÓN]]<br />
<br />
| <center>[[File:Lokus_stryper.jpg|150px]]</center><br />
|---<br />
| <center>[[File:PopCW.jpg|250px]]</center> <br />
|<br />
* '''Clon #335:''' <font color="#0000FF">'''Pop'''</font>.<br />
* '''Lugar''': A Coruña.<br />
* '''Familia''': FoldaRap 1.1<br />
* '''Generación''': 6<br />
* '''Autor''': [[User:XoanSampaiño|Xoan Sampaiño]]<br />
* '''Impresora progenitora''': Clon #187, Super 8<br />
* '''Nacimiento:''' 7 de marzo de 2014<br />
* '''Electrónica''': [[Sanguinololu]]<br />
* '''Hot-End''': [http://tech3d.org/Machined-Parts Tech3D Machined Parts]<br />
* '''Firmware''': [[Marlin]]<br />
| <center>[[File:PopCW_Logo.jpg|150px]]</center><br />
|---<br />
|}<br />
<br />
ATENCIÓN: Antes de insertar una impresora, [http://maytheclonebewithyou.com/ asegúrate de qué número te toca]<br />
<br />
== Clones en la academia Jedi ==<br />
<br />
En la academia Jedi se encuentran '''todos los clones en construcción'''. Una vez que imprimen su primera pieza alcanzan la categoría de Jedi y salen de la Academia<br />
<br />
{| class="wikitable"<br />
|- <br />
| [[File:Clone-wars-jedi-academy.png|150px|link=Clone wars: Academia Jedi]]<br />
| [[Clone wars: Academia Jedi/es|ACCESO A LA ACADEMIA JEDI]]<br />
|}<br />
<br />
== Clones en Carbonita ==<br />
Clones sin actividad durante bastante tiempo. Posiblemente hayan abandonado el proyecto<br />
<br />
{| class="wikitable"<br />
|- <br />
| [[File:Han-solo-carbonita.jpg|150px|link=Clone wars: Clones en Carbonita]]<br />
| [[Clone wars: Clones en Carbonita| CLONES EN CARBONITA]]<br />
|}<br />
<br />
== Album de fotos y vídeos ==<br />
<br />
{| class="wikitable" style="text-align:center" border="0"<br />
! align="center" colspan="3" | [[Clon_wars:_Album_de_Fotos | Ver Álbum de Fotos completo]]<br />
|- align="center"<br />
| [[File:DSC04024.JPG|200px|link=Clon_wars:_Album_de_Fotos]]<br>'''31/Dic/2011''': Piezas impresas <br> por el Clon R2D2<br />
| [[File:R2D2-cubo-1.jpg|200px|link=Clon_wars:_Album_de_Fotos]]<br>'''24/Dic/2011''': El clon R2D2 ha <br> impreso su primera pieza<br />
| [[File:DSC03885.JPG|200px|link=Clon_wars:_Album_de_Fotos]]<br>'''16/Dic/2011''': Tercera reunión <br> de Clone Wars<br />
|}<br />
<br />
<br />
{| class="wikitable" style="text-align:center" <br />
! align="center" colspan="3" border="0" | [[Clone wars: Album de Videos| Ver Álbum de Vídeos completo]]<br />
|- <br />
|| <videoflash>tDHL7AZm_y8|300|250</videoflash><br />
|| <videoflash>oC_1Tjw196Y|300|250</videoflash><br />
|| <videoflash>_Q3XlmnbWrM|300|250</videoflash><br />
|- <br />
|| '''24/Dic/2011''': Clon R2D2. <br> Primera impresión del Clon R2D2<br />
|| '''20/Dic/2011''': Clon R2D2. <br> Probando el extrusor<br />
|| '''12/Jun/2013''': Clon Gutenberg<br>Adaptación a fresadora<br />
|- <br />
|| <videoflash>zNMdKdazemM|300|250</videoflash><br />
|- <br />
|| '''11/Jun/2013''': Clon Gutenberg<br>Prueba de velocidad como plotter<br />
<br />
|}<br />
<br />
<br />
{| class="wikitable"<br />
|-<br />
|<br />
[[File:Clone-Wars-logo.png|border|100px|link=Proyecto Clone Wars]]<br />
| [[Proyecto Clone Wars]]<br />
|}<br />
<br />
<br />
[[Category:Clone wars/es]]</div>
Lokus77
https://reprap.org/mediawiki/index.php?title=Clone_Wars:_El_imperio_de_los_clones/es&diff=119581
Clone Wars: El imperio de los clones/es
2014-03-10T10:22:28Z
<p>Lokus77: /* Jedis */</p>
<hr />
<div>{{Languages|Clone_Wars:_El_imperio_de_los_clones}}<br />
== El Imperio Clone wars ==<br />
<br />
=== Árbol genealógico ===<br />
Todo clon tiene un origen...<br />
<p id="mainPage.title" style="background:#eeeeee; color:#cf7606; padding: 0.4em; font-weight: bold; font-size: 120%;">Cantidad de Repstraps hasta el momento: 19 </p><br />
<p id="mainPage.title" style="background:#eeeeee; color:#cf7606; padding: 0.4em; font-weight: bold; font-size: 120%;">Cantidad de clones producidos hasta el momento: 264 </p><br />
<p id="mainPage.title" style="background:#eeeeee; color:#cf3606; padding: 0.4em; font-weight: bold; font-size: 120%;">Cantidad total de Impresoras 3D: 283 </p><br />
{| class="wikitable"<br />
|- <br />
| <center>[[File:2012-12-20-clone-wars-genealogy-100-clones.png|250px|Todo clon tiene un origen... (click para agrandar)]]</center><br />
| <center>[[File:cw_tree_2.png|250px]]</center><br />
|-----<br />
|<br />
* El fichero vectorial (SVG) está en [https://github.com/Obijuan/Clone-wars/tree/master/genealogy el repositorio] <br />
* [https://raw.github.com/Obijuan/Clone-wars/master/genealogy/png/2012-12-20-clone-wars-genealogy-100-clones.png PNG en alta resolución]<br />
| <center>Puedes agregar tu clon y ver los que están ya agregados en<br><br />
[http://maytheclonebewithyou.com/ May The Clone Be With You]</center><br />
|}<br />
<br />
=== Cronología ===<br />
<br />
{| class="wikitable"<br />
|- <br />
| [[File:clonwars_timeline.png|200px|Acceso a la cronología|link=http://www.b-o-t.cc]]<br />
|<br />
* El proyecto CloneWars tiene ya un tamaño importante. Hemos creado [http://www.b-o-t.cc esta cronología] para mostrar de otra forma todos los acontecimientos que han ido recogiéndose y que sin duda se producirán en adelante.<br />
|}<br />
<br />
== Mapa del Imperio de los Clones ==<br />
<br />
{| class="wikitable"<br />
|- <br />
| [[File:Clon-wars-map.png|200px|Acceso directo al mapa|link=http://maps.google.com/maps/ms?msid=212249552587451398586.0004b8d56644866cdfb9c&msa=0&ll=40.413496,-3.713379&spn=13.022942,28.520508]]<br />
|<br />
* ¿Quieres conocer '''cuántos clones hay cerca de donde vives''' o ver '''la extensión del imperio de clones'''? Consulta el [[Mapa Imperio Clones| mapa del Imperio de los Clones]].<br />
* ¿Quieres que todos sepan '''dónde se encuentra el clon que has construido o que estás construyendo'''? En el [[Mapa Imperio Clones| mapa del Imperio de los Clones]] puedes añadir la localización y estado de tu clon.<br />
|}<br />
<br />
== Generación 0: Las impresoras progenitoras ==<br />
<br />
{| class="wikitable" style="width:100%"<br />
|- <br />
| [[File:Madre-gen0-r1.jpg|150px|link=Makerbot Thing-o-matic: MADRE]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">MADRE</font>'''<br />
* '''Localización''': Universidad Carlos III de Madrid<br />
* '''Modelo''': [http://store.makerbot.com/makerbot-thing-o-matic.html Thing-o-Matic] de la empresa Makerbot<br />
* '''Nacimiento''': 16/Mayo/2011<br />
* '''Propiedad de''': [http://asrob.uc3m.es/index.php/Main_Page Asociación de Robótica de la UC3M]<br />
* '''Hijos''': [[Clone wars:Impresora Death Star|Death Star]], [[Clone wars:Impresora Maese Artorius|Maese Artorius]], [[Clone wars:Impresora Mardan|Mardan]], [[Clone wars:Impresora Sonny|Sonny]], [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]], [[Clone_wars:Impresora_Wendy|Wendy]]<br />
* '''[http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:MADRE MAS INFORMACIÓN]'''<br />
|<br />
<center> [[File:Mother 98098.png|200px]] </center><br />
|--------<br />
| [[File:PADRE-1.jpg|160px|link=Makerbot Thing-o-matic: PADRE]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">PADRE</font>''' (a.k.a UC3-PO)<br />
* '''Localización''': Universidad Carlos III de Madrid<br />
* '''Modelo''': [http://store.makerbot.com/makerbot-thing-o-matic.html Thing-o-Matic] de la empresa Makerbot<br />
* '''Nacimiento''': 8/Oct/2011 (Impresión de la primera pieza)<br />
* '''Propiedad de''': [http://www.uc3m.es/portal/page/portal/dpto_ing_sistemas_automatica Departamento de Ingeniería de Sistemas y Automática]<br />
* '''Hijos''': [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]], [[Clone_wars:Impresora_Wendy|Wendy]], [[Clone wars: Impresora Dédadlo|Dédalo]]<br />
* '''[http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:PADRE MAS INFORMACIÓN]'''<br />
|<br />
<center> [[File:Darth-vader-star-wars-doormat.jpg|170px]] </center><br />
<center>"Yo soy tu padre..."</center><br />
|----------------<br />
| [[File:R1-50.jpg|160px|link=http://www.iearobotics.com/wiki/index.php?title=Makerbot_Cupcake:_R1]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">R1</font>''' (<font color="#00FF00">R.I.P</font>)<br />
* '''Localización''': Madrid<br />
* '''Modelo''': [http://wiki.makerbot.com/cupcake Cupcake], de Makerbot Industries (Número 8 del mundo)<br />
* '''Nacimiento''': 19/Mayo/2009<br />
* '''Propiedad de''': <br />
** [http://www.iearobotics.com/wiki/index.php?title=Juan_Gonzalez:Main Juan González-Gómez] (Obijuan)<br />
** [http://www.iearobotics.com/wiki/index.php?title=Andr%C3%A9s_Prieto-Moreno Andrés Prieto-Moreno]<br />
* '''Hijos''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel:_R2D2 R2D2]<br />
<br />
* '''[http://www.iearobotics.com/wiki/index.php?title=Makerbot_Cupcake:_R1 MAS INFORMACIÓN]'''<br />
|<br />
<center> [[File:R1-series.jpg |90px]] </center> <br><br />
<center>[http://starwars.wikia.com/wiki/R1-series_astromech_droid Serie R1]</center><br />
|----------------<br />
| [[File:MAF1.jpeg|160px]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">MAF-1</font>''' <br />
* '''Localización''': Madrid y "El Bierzo"<br />
* '''Modelo''': [http://www.makergear.com/blogs/frontpage/3323752-the-makergear-mosaic-3d-printer Mosaic], de Makergear<br />
* '''Nacimiento''': 22/Abril/2012 <br />
* '''Propiedad de''': <br />
**[http://madebyfrutos.es/ Miguel Angel de Frutos] <br />
* '''Hijos''': [[Clone wars: Impresora Rewok|Rewok]]<br />
* '''[[MakerGear Mosaic 1: MAF-1|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:StormtrooperMoonwalkWallpaper.jpg |250px]] </center> <br><br />
|----------------<br />
| [[File:Clon0-Demiurgo-6489.jpg|160px]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">Demiurgo</font>''' <br />
* '''Localización''': Madrid<br />
* '''Modelo''': [http://store.makerbot.com/makerbot-thing-o-matic.html Thing-o-Matic] de la empresa Makerbot<br />
* '''Nacimiento''': 15/Enero/2012<br />
* '''Propiedad de''': Jon Goitia<br />
* '''Hijos''': [[Impresora: la cosa|La Cosa]], [[Impresora:_unicorn|Unicorn]]<br />
* '''[[Impresora Progenitora: Demiurgo|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Lion-faced deity.jpg|200px]] </center> <br><br />
|----------------<br />
| [[File:IMG_0472.jpg|200px]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">3DGDAF</font>''' <br />
* '''Modelo''': [http://store.makerbot.com/replicator-404.html Replicator], de la empresa Makerbot<br />
* '''Nacimiento''': 22/06/2012 - Impresión de la primera pieza el 26/06/2012<br />
* '''Propiedad de''': [http://www.uc3m.es/portal/page/portal/grupos_investigacion/grupo_displays_aplicaciones_fotonicas Grupo de Displays y Aplicaciones Fotónicas de la UC3M]<br />
* '''Localización''': UC3M, Madrid<br />
* '''MAS INFORMACIÓN'''<br />
|<br />
<center> [[File:Logo 3D-GDAF.jpg|170px]] </center><br />
|----------------<br />
| [[File:Robcib-maker.jpg|200px|link=http://www.iearobotics.com/wiki/index.php?title=MakerBot_Thing-o-Matic:_Robcib-Maker]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">UPM-MAKER</font>''' <br />
* '''Modelo''': [http://store.makerbot.com/makerbot-thing-o-matic.html Thing-o-Matic] de la empresa Makerbot<br />
* '''Nacimiento''': 11/2011 <br />
* '''Propiedad de''': [http://www.robcib.etsii.upm.es/ RobCib]. Grupo de Robótica y Cibernética, UPM.<br />
* '''Localización''': ETSII-UPM, Madrid<br />
* '''[http://www.iearobotics.com/wiki/index.php?title=MakerBot_Thing-o-Matic:_Robcib-Maker MAS INFORMACIÓN]'''<br />
|<br />
<center> [[File:robcib.jpg|170px]] </center><br />
|----------------<br />
| [[File:Clon0-CADesigns.png|200px|link=]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">CADesigns</font>''' <br />
* '''Modelo''': Derivación Thing-o-Matic (conversión medidas a sistema métrico)<br />
* '''Nacimiento''': Marzo 2011<br />
* '''Propiedad de''': Carlos Monreal<br />
* '''Localización''': Zaragoza<br />
* '''MAS INFORMACIÓN'''<br />
|<br />
<center> [[File:Cadesign-logo.png|170px]] </center><br />
|--------<br />
| [[File:Cupcake-madalena.jpg|200px]]<br />
|<br />
* '''Nombre''': '''<font color="#0000FF">Madalena</font>'''<br />
* '''Modelo''': [http://wiki.makerbot.com/cupcake Cupcake], de Makerbot Industries (nº 2542)<br />
* '''Nacimiento''': 12/Mar/2011 (Impresión de la primera pieza)<br />
* '''Propiedad de''': [http://canarnova.blogspot.com/ Canarnova - Grupo de creación e innovación tecnológica de Canarias]<br />
* '''Localización''': Tenerife, Canarias<br />
* '''MÁS INFORMACIÓN'''<br />
|<br />
<center> [[File:Cupcake_mint.jpg|170px]] </center><br />
|------------- <br />
| <center>[[File:Clone0-Xan.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Xan</font>'''<br />
*'''Lugar''': Cancún (México)<br />
*'''Familia''': [http://reprap.org/wiki/Printrbot#Laser-cut_Printrbots Printrbot Plus]<br />
*'''Autor''': Alejandro Martín<br />
* '''Nacimiento''': 23/Sep/2012<br />
* '''MÁS INFORMACIÓN'''<br />
| <center>[[File:Xan-logo.png|150px]]</center> <br />
|------------- <br />
| <center>[[File:Clon0-Plumabot-M.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Plumabot-M</font>'''<br />
*'''Localización''': Madrid<br />
*'''Modelo''': Replicator I<br />
*'''Lugar''': IES Juan de la Cierva, Madrid<br />
* '''Nacimiento''': 4/Junio/2012<br />
*'''Propiedad de''': IES Juan de la Cierva<br />
* '''MÁS INFORMACIÓN'''<br />
| <center>[[File:PLUMABOT-M.bmp]]</center> <br />
|------------- <br />
| <center>[[File:Clone0-pris.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Pris</font>'''<br />
*'''Lugar''': Madrid<br />
*'''Autor''': Jose Hevia<br />
*'''Familia''': Printrbot+ LC<br />
*'''Nacimiento''': 20/Julio/2012<br />
*'''MÁS INFORMACIÓN'''<br />
| <center>[[File:Pris2.jpg|200px]]</center> <br />
|------------- <br />
| <center>[[File:Clon0-Micro tr.png|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Micro</font>'''<br />
*'''Lugar''': Madrid<br />
*'''Autor''': [http://carlosgs.es/ Carlos García Saura]<br />
*'''Familia''': [http://printrbot.com/shop/printrbot-jr/ Printrbot jr.]<br />
*'''Nacimiento''': 23/Octubre/2012<br />
*'''MÁS INFORMACIÓN'''<br />
| <center>[[File:Micro-logo.png|200px]]</center> <br />
|------------- <br />
| <center>[[File:Clon0-HORI.png|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">HORI</font>'''<br />
*'''Lugar''': Madrid<br />
*'''Propietario''': [http://www-bsac.eecs.berkeley.edu/~mccoy/ Chris D. McCoy] <br />
*'''Operador actual ''': [http://madebyfrutos.wordpress.com/ Miguel Ángel de Frutos], en [http://aerobotclubderobticadeaeronuticos.blogspot.com.es/ Aerobot Club de Robótica] <br />
*'''Familia''': [http://store.makerbot.com/replicator.html/ Replicator I], de Makerbot<br />
*'''Nacimiento''': 10/Julio/2012<br />
*'''[[HORI |MAS INFORMACIÓN]]'''<br />
| <center>[[File:Clon0-HORI.png|150px]]</center> <br />
|------------- <br />
| <center>[[File:Clon0-UltiCo.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">UltiCO</font>'''<br />
*'''Lugar''': Carrasquedo (Burgos)<br />
*'''Propietario''': Ivan Blasco<br />
*'''Familia''': Ultimaker<br />
*'''Nacimiento''': 15/Jul/2012<br />
*'''[[UltiCo |MAS INFORMACIÓN]]'''<br />
| <center>[[File:UltiCO-logo.png|150px]]</center> <br />
|------------- <br />
| <center>[[File:DeutecnoMAKER-1.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Deutecno-maker</font>'''<br />
*'''Lugar''': Ávila<br />
*'''Propietario''': [http://www.deutecno.com/index2.html Deutecno, S.L]<br />
*'''Familia''': Thing-o-matic <br />
*'''Nacimiento''': 15/Dic/2011<br />
*'''[http://www.iearobotics.com/wiki/index.php?title=MakerBot_Thing-o-Matic:_Deutecno-Maker MAS INFORMACIÓN]'''<br />
| <center>[[File:DEUTECNO-label.jpg|150px]]</center> <br />
|------------- <br />
| <center>[[File:Clon 0 Magic carpet.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Magic Carpet</font>'''<br />
*'''Lugar''': Orio (Guipúzcoa)<br />
*'''Autor''': Antonio Campos<br />
*'''Familia''': [http://printrbot.com/shop/printrbot-jr/ Printrbot jr.]<br />
*'''Nacimiento''': 30/Octubre/2012<br />
*'''MÁS INFORMACIÓN'''<br />
| <center>[[File:Clon0 magic carpet logo.png|200px]]</center> <br />
|------------- <br />
| <center>[[File:Clon0-Plumabot-Gr.jpg|200px]]</center> <br />
|<br />
*'''Nombre''': '''<font color="#0000FF">Plumabot-Gr</font>'''<br />
*'''Localización''': Granada<br />
*'''Modelo''': Replicator I<br />
*'''Lugar''': IES Virgen de las Nieves, Granada<br />
*'''Nacimiento''': 28/Septiembre/2012<br />
*'''Propiedad de:''': IES Virgen de las Nieves<br />
*'''MÁS INFORMACIÓN'''<br />
| <center>[[File:PLUMABOT-Gr.jpg|200px]]</center> <br />
|------------- <br />
| <center>[[File:Art_e_Facto.jpg|200px]]</center> <br />
|<br />
*'''Nombre:''' '''<font color="#0000FF">Art-e-Facto</font>'''<br />
*'''Localización:''' Madrid<br />
*'''Modelo:''' RepStrap CNC<br />
*'''Lugar:''' Vallecas<br />
*'''Nacimiento:''' 19/Marzo/2013<br />
*'''Propiedad de:''' Miguel Herranz<br />
*'''MÁS INFORMACIÓN'''<br />
| <center>[[File:X-Wing.jpg|200px]]</center><br />
<center>X-Wing</center> <br />
|------------- <br />
|}<br />
<br />
== Los Clones ==<br />
<br />
=== Máster de la orden Jedi ===<br />
* '''Descripción''': Clones que hayan parido '''TRES o más clones''' totalmente operativos (Jedi)<br />
<br />
{| class="wikitable" style="width:100%"<br />
<br />
{{Template:CloneWars_clon|29|Gandalf the transparent | [[Prusa_Air_2|Prusa Air 2]] | 1 | 20/Jun/2012 | [http://iearobotics.com/alberto/doku.php Alberto Valero] | [http://www.iearobotics.com/wiki/index.php?title&#61;Impresora_3D:PADRE PADRE] y [http://www.iearobotics.com/wiki/index.php?title&#61;Impresora_3D:MADRE MADRE] | Universidad Carlos III de Madrid | [[Clone wars: Impresora Gandalf the transparent | '''Mas información''']] | File:Clon-29-Gandalf-the-transparent.png | File:Logo-gandalf-transparent2.png }}<br />
<br />
<br />
{{Template:CloneWars_clon|1|R2D2 (R.I.P)|[[Prusa Mendel (iteration 1)|Prusa Mendel]] original|1|24/Dic/2011|[http://www.iearobotics.com/wiki/index.php?title&#61;Juan_Gonzalez:Main Juan González-Gómez] (Obijuan) y [http://www.iearobotics.com/wiki/index.php?title&#61;Andr%C3%A9s_Prieto-Moreno Andrés Prieto-Moreno]|[http://www.iearobotics.com/wiki/index.php?title&#61;Makerbot_Cupcake:_R1 R1]|Madrid|[http://www.iearobotics.com/wiki/index.php?title&#61;Prusa_Mendel:_R2D2 '''Mas información''']|File:Prusa-r2d2-clon.jpg|File:R2d2.jpg}}<br />
<br />
<br />
{{Template:CloneWars_clon|13|R3|[[Prusa Mendel (iteration 2)|Prusa Mendel Iteración 2]]|1|01/Abril/2012|[http://www.iearobotics.com/wiki/index.php?title&#61;Juan_Gonzalez:Main Juan González Gómez] (Obijuan)|[http://www.iearobotics.com/wiki/index.php?title&#61;Prusa_Mendel:_R2D2 R2D2]|Madrid|[http://www.iearobotics.com/wiki/index.php?title&#61;Prusa_Mendel_Iteraci%C3%B3n_2:_R3 '''Mas información''']| File:R3-1.jpg | File:R3.jpg }}<br />
<br />
|---------------<br />
| <center>[[File:Clon-Deathstar 2012-01-07 1-r2.jpg|200px|link=Clone wars:Impresora Death Star]]</center><br />
|<br />
* '''Clon #2''': '''<font color="#0000FF">Death Star</font>'''<br />
* '''Lugar''': MADRID<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original<br />
* '''Generación''': 1<br />
* '''Autor''': Fernando Salceda Álvarez (klonando)<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:MADRE MADRE]<br />
* '''Descendencia''': [[Clone_wars:_The_Clone_UA|The Clone UA]], [[Clone_wars:_TIEFighter|TIE Fighter]], [[Clone_Wars:_Tron|Tron]]<br />
* '''Nacimiento''': 06/Enero/2012<br />
* '''[[Clone_wars:Impresora_Death_Star|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Deathstar.png|150px|link=Clone wars:Impresora Death Star]]</center><br />
|----------------<br />
| <center>[[File:Jedi manuela.jpg|220px|]]</center><br />
|<br />
* '''Clon #10''': '''<font color="#0000FF">Manuela</font>'''<br />
* '''Lugar''': Valladolid<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original modificada con piezas V2 <br />
* '''Generación''': 1<br />
* '''Autor''': Jose Luis del Olmo (Macnetic)<br />
* '''Impresora Progenitora''': Desconocida<br />
* '''Descendencia''': [[Clone Wars: Impresora Pepa|Pepa]], [[Clone wars:Impresora Daneel 3-law|Daneel 3-law]], C3PO, Michaelmas, Alcar, Shmi Skywalker, Prusikito, Nazgul hijo de Manuela<br />
* '''Nacimiento''': 02/Marzo/2012<br />
* '''[[Clone wars:Impresora Manuela|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Macnetic.png|200px]]</center><br />
|-----<br />
| <center>[[File:Clon-32-guaifi.jpg|200px]]</center> <br />
|<br />
* '''Clon #32''': '''<font color="#0000FF">Guaifi</font>'''<br />
* '''Lugar''': A Coruña<br />
* '''Familia''': [[Prusa Mendel (iteration 2)]], con mejoras de piezas<br />
* '''Generación''': 2 <br />
* '''Autor''': Fidel Fraga Fernández (@guaifi)<br />
* '''Impresora Progenitora''': [[Clone wars: Impresora Ociorum|Ociroum/Bricolabs]]<br />
* '''Descendencia''': Abe, Matrix, Laura Palmer<br />
* '''Nacimiento''': 10/Jun/2012<br />
* [http://fidelfraga.eu/content/impresora-3d MÁS INFORMACIÓN]<br />
: <br />
|<center> [[File:Guaifi-logo-temp.png|200px]]</center><br />
|-----------<br />
<br />
| <center>[[File:J52-r1.jpg|200px|]]</center><br />
|<br />
* '''Clon #9''': '''<font color="#0000FF">Johnny 5</font>'''<br />
* '''Lugar''': Alicante<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original modificada con piezas de la V2<br />
* '''Generación''': 1<br />
* '''Autor''': [http://www.mbrobotics.es/MbRobotics/Main.html MABLACK (Miguel Angel Berna Alberola)]<br />
* '''Impresora Progenitora''': Desconocida<br />
* '''Descendencia:''' EVE, WALL-E, Kneesaa, Conguito 3D, Nexus 6, Wedge, Queen Mother<br />
* Nacimiento: '''25/Febrero/2012'''<br />
* '''[http://www.mbrobotics.es/Wiki/index.php?title=JOHNNY5 MAS INFORMACIÓN]'''<br />
|<br />
<center> [[File:J5.jpg|200px]]</center><br />
<br />
{{Template:CloneWars_clon|39|Daneel 3-law|Prusa Iteracion 2|2|11/Agosto/2012|Alejandro Suárez, Javier Briz|[[Clone wars:Impresora Manuela|Manuela]]|Universidad de Zaragoza|[[Clone wars:Impresora Daneel 3-law | '''Mas información''']] |File:Clone-39-Daneel 3-law jedi.png|File:Logo_pulsar.png}}<br />
<br />
|-----------<br />
| <center>[[File:Clon-30-xwing.jpg|250px]]</center> <br />
|<br />
* '''Clon #30''': '''<font color="#0000FF">X-Wing</font>'''<br />
* '''Lugar''': Universidad de Málaga<br />
* '''Familia''': [http://asrob.uc3m.es/index.php/Clone_wars:_Prusa_Iteraci%C3%B3n_2 Prusa Mendel Iteration 2]<br />
* '''Generación''': 2 <br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel:_R2D2 R2D2]<br />
* '''Autor''': [http://blog.reclone3d.com Exergy123]<br />
* '''Descendencia:''': Y-Wing,Restaun3d,LAAT,Bumblebee<br />
* '''Nacimiento''': 26/Jun/2012<br />
* '''[[Clone wars:Impresora X Wing|MÁS INFORMACIÓN]]'''<br />
: <br />
|<center> [[File:Xwing_RS3.jpg|150px]]</center><br />
|----------<br />
| <center>[[File:Potato-r1.png|200px]]</center> <br />
|<br />
* '''Clon #16''': '''<font color="#0000FF">Potato</font>'''<br />
* '''Lugar''': Universidad Carlos III de Madrid<br />
* '''Familia''': Prusa iteración 2<br />
* '''Generación''': 1<br />
* Autores: [https://plus.google.com/108347194424547002289/about Santiago López]<br />
* '''Impresora Progenitora''': Holandesa ebay<br />
* '''Nacimiento''': 15/Abril/2012<br />
* '''[[Clone wars: Impresora Potato|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Mrpotato.jpg|140px]]</center><br />
|----------<br />
| <center>[[File:Clon-17-uterus.jpg|280px]]</center> <br />
|<br />
* '''Clon #17''': '''<font color="#0000FF">Úterus</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa iteración 2<br />
* '''Generación''': 2<br />
* Autor: Juan Manuel Amuedo González (Coleóptero)<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel:_R2D2 R2]<br />
* '''Descendencia''': [[Clone wars:Impresora Geek-X-truder|Geek-X-truder]], Kubrick, [[http://www.reprap.org/wiki/Clone_wars_Impresora_Moebius|Moebius]]<br />
* '''Nacimiento''': 05/Mayo/2012<br />
* [[Clone wars: Impresora Uterus|MÁS INFORMACIÓN]]<br />
|<br />
<center> [[File:SuperUterus-big-475x382.png|140px]]</center><br />
|----------<br />
| <center>[[File:Clon-41-Geek-X-truder.jpg|150px]]</center> <br />
|<br />
*'''Clon #41''': '''<font color="#0000FF">Geek-X-truder</font>'''<br />
* '''Tipo''': Printrbot<br />
* '''Generación''': 3<br />
* '''Impresora progenitora''': [[Clone wars:_Impresora_Uterus|Uterus]]<br />
* '''Descendencia''': Reena, SanValero, Mamabot, Ignacio, Bruno, Ocellet, Daniel F., Antonio M., Maikel<br />
* '''Autor''': Pablo Murillo - [http://www.arduteka.com '''Arduteka''']<br />
* '''Zaragoza'''<br />
* '''Nacimiento''': 26/Agosto/2012<br />
* '''[[Clone_wars:Impresora Geek-X-truder|MÁS INFORMACIÓN]]'''<br />
: <br />
|<br />
<center> [[File:Banner_Arduteka.png|150px]]</center><br />
|-----------<br />
| <center>[[File:2012-02-07-paclemaker.jpg|200px|link=Clone wars:Impresora PacleMAKER]]</center> <br />
|<br />
* '''Clon #7''': '''<font color="#0000FF">PacleMAKER</font>''' <br />
* '''Lugar''': Universidad Politécnica de Madrid<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original<br />
* '''Generación''': 1<br />
* '''Universidad Politécnica de Madrid'''<br />
* '''Autor''': Pablo Clemente<br />
* '''Impresora Progenitora''': Thing-o-matic de la UPM<br />
* Nacimiento: '''7/Febrero/2012'''<br />
* '''[[Clone wars:Impresora PacleMAKER|MÁS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:PacleMaker-logo.png|200px|link=Clone wars:Impresora PacleMAKER]]</center><br />
|---------<br />
| <center>[[File:Clon-55-Y-Wing.jpg|220px]]</center><br />
|<br />
* '''Clon #55''': '''<font color="#0000FF">Y-Wing</font>'''<br />
Pertenece a Reclone3d's Farm<br />
* '''Lugar''': Universidad de Málaga<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 3<br />
* '''Autor''': Exergy123<br />
* '''Impresora Progenitora''': X-Wing<br />
* Nacimiento: '''13/Octubre/2012''' a las 20:00<br />
* [MÁS INFORMACIÓN]<br />
| <center>[[File:Y-Wing.jpg|200px]]</center><br />
|---------<br />
| <center>[[File:Clone-23-The Clone UA Jedi.jpg|200px]]</center> <br />
|<br />
* '''Clon #23''': '''<font color="#0000FF">The Clon UA</font>'''<br />
* '''Lugar''': Universidad de Alicante <br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 2<br />
* Autor: Diego Viejo<br />
* '''Impresora Progenitora''': [[Clone wars:Impresora Death Star|Deathstar]]<br />
* '''Nacimiento''': 23/Mayo/2012<br />
* '''Descendencia''': [[Clone_wars:_Impresora_Dolly|Dolly]] Axlotl Tank y Robotijo<br />
* '''[[Clone_wars:_The_Clone_UA/es|MÁS INFORMACIÓN]]'''<br />
|<center> [[File:Clone_UA_logo.png|150px]]</center><br />
|---------<br />
| <center>[[File:Clon-79-SpongeBot.jpg|200px]]</center> <br />
|<br />
* '''Clon #79''': <font color="#0000FF">SpongeBot (R.I.P.)</font><br />
* '''Lugar''': A coruña<br />
* '''Familia''': Prusa iteración 2<br />
* '''Generación''': 4<br />
* '''Autor''': Alejandro Taracido (TCRobotics)<br />
* '''Impresora progenitora''': Clon #48: Matrix<br />
* '''Nacimiento''': 27/Nov/2012<br />
* '''Descendencia''': Clon #187: Super 8, Clon #188: BruceIsPrinting, Clon #221: IG-88<br />
| | <center>[[File:Spongebot-logo.png| 150px]]</center> <br />
|---------<br />
| <center>[[File:Clon-53-Michaelmas.jpg|220px|]]</center><br />
|<br />
* '''Clon #53''': '''<font color="#0000FF">Michaelmas</font>'''<br />
* '''Lugar''': Valladolid<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2] <br />
* '''Generación''': 2<br />
* '''Autor''': Jose Luis del Olmo (Macnetic)<br />
* '''Impresora Progenitora''': Manuela<br />
* '''Descendencia''': VirPrusa, Prusacervi, Rincewind, Jendrinator<br />
* Nacimiento: '''05/Octubre/2012'''<br />
* '''[[Clone wars:Impresora Michaelmas|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Macnetic.png|200px]]</center><br />
|---------<br />
| <center>[[File:Super_8CW.jpg|250px]]</center> <br />
|<br />
* '''Clon #187:''' <font color="#0000FF">'''Super 8'''</font>.<br />
* '''Lugar''': A Coruña.<br />
* '''Familia''': Prusa Iteración 3<br />
* '''Generación''': 5<br />
* '''Autor''': [[User:XoanSampaiño|Xoan Sampaiño]]<br />
* '''Impresora progenitora''': Clon #79, SpongeBot (R.I.P.)<br />
* '''Nacimiento:''' 29 de marzo de 2013<br />
* '''Electrónica''': [[Gen7 Board-AVR 1.5]]<br />
* '''Hot-End''': [http://www.printallthethings.com/en/home/40-j-head-peek.html J-Head PEEK]<br />
* '''Firmware''': [[Marlin]]<br />
* '''Descendencia'''<br />
** Clon #218: SpongeBot Reloaded<br />
** Clon #255: Boneca<br />
** Clon #262: Gladiator<br />
** Clon #298: Ingenio<br />
** Clon #311: Ctrl-Z<br />
** Clon #318: AgroBot<br />
** Clon #335: Pop<br />
| <center>[[File:Super_8CW_Logo.jpg|150px]]</center><br />
|----------<br />
| <center>[[File:Clone-26-Rewok.png|200px]]</center> <br />
|<br />
* '''Clon #26''': '''<font color="#0000FF">Rewok</font>'''<br />
* '''Lugar''': Ourense<br />
* '''Familia''': PrintrBot<br />
* '''Generación''': 1<br />
* '''Autor''': Carlos Currás (Aisflou)<br />
* '''Impresora Progenitora''': [[MakerGear Mosaic 1: MAF-1|MAF-1]]<br />
* '''Descendencia''': Khan, Torcal, Element 115<br />
* '''Nacimiento''': 13/Jun/2012<br />
* '''[[Clone wars: Impresora Rewok|MÁS INFORMACIÓN]]'''<br />
|<center> [[File:Rewok.jpg|150px]]</center><br />
|------------- <br />
| <center>[[File:Telchar.JPG|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #122''': <font color="#0000FF">Telchar, Extrusor de Mithril</font><br />
* '''Lugar''': Málaga<br />
* '''Familia''': Mendel Prusa Iteración 2<br />
* '''Generación''': 3<br />
* '''Autor''': Paco Martos (Paclón)<br />
* '''Impresora progenitora''': X-Wing [http://www.reprap.org/wiki/Clone_wars:Impresora_X_Wing]<br />
* '''Descendencia''':<br />
** Destriers (Clon #212)<br />
** Prisma I3 (Clon #233)<br />
** BliztCrank (Clon #310) <br />
* '''Nacimiento''':16/Enero/2013<br />
*[[Clone wars: Telchar|MAS INFORMACION]]<br />
| <center>[[File:Telchar1.JPG|250px]]</center><br />
|-------------<br />
|---------<br />
| <center>[[File:PrusaCervi.jpg|200px]]</center> <br />
|<br />
* '''Clon #136:''' <font color="#0000FF"> '''PRUSACERVI'''</font>.<br />
* '''Lugar:''' Madrid.<br />
* '''Tipo:''' [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa2]<br />
* '''Autor:''' CACER (Familia Cervilla)<br />
* '''Impresora progenitora:''' Michaelmas.<br />
* '''Nacimiento:''' 12 de Febrero de 2013<br />
* '''Descendencia:''' SAV Vader | XxPacerxX (En fase de calibrado)<br />
|<center> [[File:Cacer.jpg|200px]]</center><br />
|--------<br />
|}<br />
<br />
=== Consejero Jedi Supremo ===<br />
* '''Descripción''': Clones que hayan parido '''DOS clones''' totalmente operativos (Jedi)<br />
* '''Para subir de categoría''': Parir otro clon más<br />
{| class="wikitable" style="width:100%"<br />
|-------------<br />
| <center>[[File:Clon-mardan.jpg|200px|link=Clone wars:Impresora Mardan]]</center><br />
|<br />
* '''Clon #4''': '''<font color="#0000FF">Mardan</font>'''<br />
* '''Luegar''': Universidad Carlos III de Madrid<br />
* '''Familia''': [[Prusa_Mendel_(iteration_1)]]<br />
* '''Generación''': 1<br />
* '''Autor''': Marco Esteban Illescas<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:MADRE MADRE]<br />
* '''Descendencia''': Marvin, Howarto<br />
* Nacimiento: '''19/Enero/2012'''<br />
* '''[[Clone wars:Impresora Mardan|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Potato.jpg|150px|link=Clone wars:Impresora Mardan]]</center><br />
|---------<br />
| <center>[[File:Clon-44-Othon.jpg|200px]]</center> <br />
|<br />
* '''Clon #44''': '''<font color="#0000FF">Othon</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa 2<br />
* '''Generación''': 2<br />
* '''Autor''': Álvaro Ollero AKA Damrod AKA Fuintur<br />
* '''Nacimiento''': 22/07/2012 (primera pieza impresa)<br />
* '''Impresora progenitora''': [http://reprap.org/wiki/Clone_wars:Impresora_PacleMAKER PacleMAKER]<br />
* '''Descendencia''': [http://reprap.org/wiki/Clone_Wars:_Roi Roi], Plottercín3d<br />
* [http://reprap.org/wiki/Clone_Wars:_Othon '''MÁS INFORMACIÓN''']<br />
: <br />
|<br />
<center> [[File:Othon.jpg|150px]]</center><br />
|-------------<br />
| <center>[[File:Clon-46-3D-Prisa.jpg|150px]]</center><br />
|<br />
* '''Clon #46''': '''3D Prisa'''<br />
* '''Lugar''': Madrid<br />
* '''Tipo''': [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Generación''': 1<br />
* '''Autor''': Fernando Remiro<br />
* '''Impresora progenitora''': Plumabot_M<br />
* '''Descendencia''': Arturo, The Orange Printwork<br />
<br />
* '''Nacimiento''': 6/9/2012 (acabada)<br />
* [[Clone wars: Impresora 3D-Prisa|MÁS INFORMACIÓN]]<br />
|<center>[[File:Remiro-1.jpg|150px]]</center> <br />
|---------<br />
| <center>[[File:Clone-49-R5D5.jpg|200px|link=Clone_Wars:_R5D5]]</center> <br />
|<br />
* '''Clon #49''': [[Clone Wars: R5D5|'''R5D5''']]<br />
* '''Lugar''': Vitoria-Gasteiz<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Generación''': 1<br />
* '''Autor''': Raul Jimenez.<br />
* '''Impresora progenitora''': Desconocida.<br />
* '''Nacimiento''': 11/Septiembre/2012<br />
* [[Clone wars:RepRap Prusa2 R5D5|MÁS INFORMACIÓN]]<br />
|<br />
<center> [[File:711 4.jpg|150px]]</center><br />
|-------------<br />
| <center>[[File:Clon-75-bumblebee.png|200px]]</center> <br />
|<br />
* '''Clon #75''': <font color="#0000FF">Bumblebee</font><br />
* '''Lugar''': Mollet del Vallès (Barcelona)<br />
* '''Familia''': Printrbot v2<br />
* '''Autores''': Ariadna Trueba y Juan Pedro López<br />
* '''Impresora progenitora''': X-Wing<br />
* '''Nacimiento''': 22-11-2012<br />
* '''Descendencia''': C-Wing (clon #169), TKL 1.0 (clon #183)<br />
* [[Clone Wars:Impresora Bumblebee|MÁS INFORMACIÓN]]<br />
| | <center>[[File:Bumblebee-CW-logo.jpg | 200px]]</center> <br />
|--------------<br />
| <center>[[File:Jedi GrBot3D.jpg|300px]]</center><br />
*Asignado: ok<br />
*Recortador : Paclon<br />
|<br />
* '''Clon #125:''' <font color="#0000FF">GrBot-3D</font> <br />
* '''Lugar:''' Granada<br />
* '''Modelo:''' Prusa Iteration 2<br />
* '''Autor: Federico Coca<br />
* '''Impresora progenitora:''' Plumabot_Gr<br />
* '''Generación:''' 1<br />
* '''Nacimiento''':19/Enero/2013 (Acabada)<br />
* '''Descendencia (Hijos)''': [http://www.reprap.org/wiki/Clone_Wars:_Impresora_AVATAR ÁVATAR] - [http://reprap.org/wiki/Clone_Wars:_Impresora_Nabla Nabla]<br />
* '''Descendencia (Nietos)''': NeuroBot<br />
* [[Clone Wars: Impresora GrBot3D|MAS INFORMACIÓN]]<br />
| <center>[[File:GranaBot.jpg|150px]]</center><br />
<br />
|--------------<br />
| <center>[[File:20121130_201247.jpg|150px]]</center><br />
|<br />
* '''Clon #155:'''<font color="#0000FF">''' CAZURRA'''</font>.<br />
* Modelo: Prusa Mendel (interación 2)[http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2]<br />
* Autor: Jose Angel (jakolete)<br />
* Lugar: León<br />
* Progenitor: Death Star<br />
*'''Nacimiento:''' 15/01/2013<br />
* '''Electrónica:''' Sanguinololu [http://reprap.org/wiki/Sanguinololu]<br />
* '''Firmware:''' [https://github.com/algspd/asimov/tree/master/impresoras/giskard/Sprinter Sprinter modificado por Pulsar]<br />
* '''Hot-End:''' LEONOZZLE <br />
* '''Extrusor:''' (plástico de 3.00mm)<br />
* '''Descendencia''': MAQ1_MULTIJUGOS, RubenFerrero, Putativos....<br />
|<center> [[File:click.gif|150px]]</center><br />
|-------------<br />
| <center>[[File:BlackKnight.jpg|250px]]</center><br />
|<br />
* '''Clon #100.06''': <font color="#0000FF">Black Knight</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa Iteration 2<br />
* '''Generación''': 4<br />
* '''Autor''': Nuria Almodóvar, J.Vicente Almodovar<br />
* '''Impresora progenitora''': R2-Reloaded (Obijuan)<br />
* '''Nacimiento''': 21/Dic/2012<br />
* '''Descendencia''': <br />
** Clon #180 Clockwork Orange (Xherry)<br />
** Clon #251 Red Baron (Equipo Almodovar)<br />
<br />
| <center>[[File:The-Black-Knight-Rises.jpg|250px]]</center><br />
|-------------<br />
{{Template:CloneWars_clon|133|Ronquío|Prusa Iteration 2|3|28/Enero/2013|José Antonio Pérez Caparrós| JPi| Universidad de Jaén |[http://reprap.org/wiki/Clone_wars:_Ronqu%C3%ADo/es Clone wars: Impresora Ronquío]| File:Clon 133 Ronquio.jpg | File:Escudo Bit UJAxp.gif }}<br />
|---------<br />
|--------<br />
| <center>[[File:Cacharro-600px.png|250px]]</center><br />
|<br />
* '''Clon #168:'''<font color="#0000FF">''' Cacharro'''</font>.<br />
* '''Lugar''': Tarragona, España<br />
* '''Tipo''': Printrbot V2<br />
* '''Autor''': Vasil Valkov<br />
* '''Impresora progenitora: Gandalf the Transparent<br />
**'''Nacimiento:''' 08/03/2013<br />
**'''Electrónica:''' SAV MkI<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End: E3D <br />
| <center>[[File:Cacharro.jpg|150px]]</center><br />
|--------<br />
|}<br />
<br />
=== Consejero Jedi: Miembro del consejo jedi ===<br />
<br />
* '''Descripción''': Clones que hayan parido '''un clon''' totalmente operativo (Jedi). Por tanto, son clones con descendencia<br />
* '''Para subir de categoría''': Parir otro clon más<br />
{| class="wikitable" style="width:100%"<br />
|---------<br />
| <center>[[File:Misan1-r1.png|200px]]</center> <br />
|<br />
* '''Clon #19''': '''<font color="#0000FF">Black Misan</font>'''<br />
* '''Lugar''': Valencia <br />
* '''Familia''': Prusa mendel original <br />
* '''Generación''': 1<br />
* '''Autor''': Miguel Sánchez<br />
* '''Impresora Progenitora''': Piezas compradas RepRap-fab.org (Stoffel15)<br />
* '''Descendencia''': Blue Misan (y parte de Ukraine)<br />
* '''Nacimiento''': 23/Octubre/2011 <br />
* '''[[Clone Wars: Impresora Black Misan|MÁS INFORMACIÓN]]<br />
|<center> [[File:Photo.jpg|150px]]</center><br />
|----------<br />
| <center>[[File:Misan2-r3.png|200px]]</center> <br />
|<br />
* '''Clon #20''': '''<font color="#0000FF">Blue Misan</font>'''<br />
* '''Lugar''': Valencia <br />
* '''Familia''': Prusa iteración 2<br />
* '''Generación''': 2<br />
* '''Autor''': Miguel Sánchez<br />
* '''Impresora Progenitora''': [[Clone Wars: Impresora Black Misan|Black Misan]]<br />
* '''Descendencia''': Ukraine<br />
* '''Nacimiento''': 15/Marzo/2012<br />
* '''[[Clone Wars: Impresora Blue Misan|MÁS INFORMACIÓN]]<br />
|<center> [[File:Photo.jpg|150px]]</center><br />
|----------<br />
| <center>[[File:Clon halcon milenario.png|200px|link=Clone wars:Impresora Halcón Milenario]]</center><br />
|<br />
* '''Clon #5''': '''<font color="#0000FF">Halcón Milenario</font>'''<br />
* '''Lugar''': Universidad Autónoma de Madrid<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original, con rodamientos lineales<br />
* '''Generación''': 1<br />
* '''Autores''': <br />
** Carlos García Saura<br />
** Miembros del [http://www.uam.es/crm Club de Robótica y Mecatrónica de la UAM]<br />
* '''Impresora Progenitora''': Desconocida<br />
* '''Descendencia''': Lucy<br />
* '''Nacimiento''': 27/Enero/2012<br />
* '''[[Clone wars:Impresora Halcón Milenario|MAS INFORMACIÓN]]'''<br />
|<br />
<center> [[File:Milleniumfalcon2.jpg|200px|link=Clone wars:Impresora Halcón Milenario]]</center><br />
|-----------<br />
| <center>[[File:IMG 1310.jpg|200px|link=http://asrob.uc3m.es/index.php/Clone_wars:_Impresora_Ociorum]]</center> <br />
| <br />
* '''Clon #15''': '''<font color="#0000FF">Ociorum/Bricolabs</font>'''<br />
* '''Lugar''': Coruña (Galicia)<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 1<br />
* '''Autores''':<br />
** Alejandro Taracido ([http://twitter.com/#!/TCRobotics @TCRobotics )] [http://tcrobotics.blogspot.com/2011/05/orugasrobot-arduinoorugaspan.html Blog TCRobotics] <br />
** Fidel Fraga ([http://twitter.com/#!/guaifi @guaifi )]<br />
** Quico Prol ([http://twitter.com/#!/quicoprol @quicoprol )]<br />
** Xulio Coira ([http://twitter.com/#!/xulioc @xulioc )]<br />
* '''Impresora Progenitora''': Holandesa ebay<br />
* '''Nacimiento''': 13/Abril/2012<br />
* '''Descendencia''': Guaifi<br />
* [http://www.ociorum.org Asociación Ociorum]<br />
* [[Clone wars: Impresora_Ociorum|MÁS INFORMACIÓN]]<br />
| <center> [[File:Ociorum.jpeg|200px]]</center><br />
|--------------<br />
| <center>[[File:Clon-maese-artorius.jpg|200px|link=http://asrob.uc3m.es/index.php/Clone_wars:Impresora_Maese_Artorius]]</center><br />
|<br />
* '''Clon #3''': '''<font color="#0000FF">Maese Artorius</font>'''<br />
* '''Luegar''': Universidad Carlos III de Madrid<br />
* '''Familia''': [[Prusa_Mendel]] original<br />
* '''Generación''': 1<br />
* '''Autor''': Arturo Vera García<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:MADRE MADRE]<br />
* '''Descendencia''': jP<br />
* Nacimiento: '''19/Enero/2012'''<br />
* '''[[Clone_wars:Impresora_Maese_Artorius|MAS INFORMACIÓN]]'''<br />
| <center> [[File:86509-50249-mace-windu_large.jpg|150px|link=Clone wars:Impresora Maese Artorius]]</center><br />
|-----------<br />
| <center>[[File:R2-Reloaded-decorada.png|200px]]</center> <br />
|<br />
*'''Clon #42''': '''<font color="#0000FF">R2-RELOADED</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Tipo''': Prusa 2<br />
* '''Generación''': 3<br />
* '''Autor''': [http://www.iearobotics.com/wiki/index.php?title=Juan_Gonzalez:Main Juan Gonzalez Gomez] (Obijuan)<br />
* '''Nacimiento''': 28/Agosto/2012<br />
* '''Impresora progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R3 R3]<br />
* '''Descendencia''': Maniotas<br />
* [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R2-reloaded '''MÁS INFORMACIÓN''']<br />
: <br />
|<br />
<center> [[File:R2-reloaded.png|150px]]</center><br />
|-------------<br />
| <center>[[File:matrix_printer.png|200px]]</center> <br />
|<br />
* '''Clon #48''': [[Clone Wars: Matrix|'''Matrix''']]<br />
* '''Lugar''': Vilalba (Lugo)<br />
* '''Tipo''': PrintrBot v2<br />
* '''Generación''': 3<br />
* '''Autor''': Diego Prado ([http://twitter.com/diego_p_g @diego_p_g])<br />
* '''Impresoras progenitoras''': [[Clone wars: Impresora Ociorum|'''Ociroum/Bricolabs''']], [http://fidelfraga.eu/content/impresora-3d '''Guaifi''']<br />
* '''Descendencia''': SpongeBot<br />
* '''Nacimiento''': 30 de Agosto de 2012 <br />
|<br />
<center> [[File:matrix.jpg|200px]]</center><br />
|---------<br />
| <center>[[File:Laura.jpg|200px]]</center> <br />
|<br />
* '''Clon #63''': '''<font color="#0000FF">Laura Palmer</font>'''<br />
* '''Lugar''': Vicus Spacorum<br />
* '''Familia''': Prusa iteration 2 con mejoras de piezas<br />
* '''Generación''': 3<br />
* '''Autor''': Alfredo Prado [https://twitter.com/radikalbytes @radikalbytes] [http://www.radikalbytes.com radikalbytes.com]<br />
* '''Impresora progenitora''': Guaifi<br />
* '''Descendencia''': Alfa-3P<br />
* '''Nacimiento''': 12 Octubre de 2012<br />
* [[Clone wars: Impresora Laura Palmer|MÁS INFORMACIÓN]]<br />
|<br />
<center> [[File:IMAG0343.JPG|200px]]</center><br />
|----------<br />
| <center>[[File:Ukraine-r1.png|200px]]</center> <br />
|<br />
* '''Clon #21''': '''<font color="#0000FF">Ukraine</font>'''<br />
* '''Lugar''': Valencia <br />
* '''Familia''': Printrbot<br />
* '''Generación''': 3<br />
* '''Autor''': Miguel Sánchez<br />
* '''Impresora Progenitora''': Black Misan & Blue Misan<br />
* '''Descendencia''': Acrylic3<br />
* '''Nacimiento''': 8/Abril/2012<br />
* [[Clone_wars:Impresora Ukraine|MÁS INFORMACIÓN]]<br />
|<center> [[File:Photo.jpg|150px]]</center><br />
|-------------<br />
|<center>[[File:Clon-51-MayPrintr.jpg|200px]]</center> <br />
|<br />
* '''Clon #51''': [[Clone wars:Impresora_MayPrinter|'''MayPrinter (R.I.P)''']]<br />
* '''Lugar:''' Algeciras (Cádiz)<br />
* '''Tipo:''' [http://www.iearobotics.com/wiki/index.php?title=Clone_wars:_Printrbot Printrbot]<br />
* '''Generación''': 2<br />
* '''Autor:''' Mariano Dapía ([http://twitter.com/iPadNanito @iPadNanito])<br />
* '''Impresora progenitora:''' [[Clone wars:_Impresora_Potato|'''Potato''']]<br />
* '''Nacimiento:''' 12 de Septiembre de 2012<br />
* '''Descendencia:''' [[Clone wars:_Impresora_Kalos|'''Kalos Printer''']]<br />
* '''Defunción:''' 28 de Marzo de 2013 <br />
|<center> [[File:InvadersMay.png|200px]]</center><br />
|---------<br />
| <center>[[File:PrusaCervi.jpg|200px]]</center> <br />
|<br />
* '''Clon #136:''' <font color="#0000FF"> '''PRUSACERVI'''</font>.<br />
* '''Lugar:''' Madrid.<br />
* '''Tipo:''' [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa2]<br />
* '''Autor:''' CACER (Familia Cervilla)<br />
* '''Impresora progenitora:''' Michaelmas.<br />
* '''Nacimiento:''' 12 de Febrero de 2013<br />
* '''Descendencia:''' SAV Vader | XxPacerxX (En fase de calibrado)<br />
|<center> [[File:Cacer.jpg|200px]]</center><br />
|--------<br />
| <center>[[File:Clon-36-Pepa.jpg|200px]]</center><br />
|<br />
*'''Clon #36''': '''<font color="#0000FF">Pepa</font>'''<br />
* Tipo: Prusa Iteracion 2<br />
* Progenitora: [http://asrob.uc3m.es/index.php/Clone_wars:Impresora_Manuela Manuela]<br />
* Autor: Jose Ignacio Alonso<br />
* Lugar:Valladolid<br />
* '''Nacimiento''': 28/Jul/2012<br />
* '''Descendencia''': Caminera<br />
* [[Clone Wars: Impresora Pepa|MÁS INFORMACIÓN]]<br />
: <br />
|<center> [[File:jia.jpg|200px]]</center><br />
|--------------------<br />
{{Template:CloneWars_clon|143|[http://www.reprap.org/wiki/Clone_Wars:_Impresora_AVATAR ÁVATAR]|Prusa Iteracion 2|2|10/Febrero/2013|Juan Robles. (jrdetoro)|[http://www.reprap.org/wiki/Clone_Wars:_Impresora_GrBot3D GRBot-3D]|Granada|Clone wars:Impresora Avatar|File:Avatar_jedim.jpg|File:Logoavatar.png}}<br />
|--------<br />
| <center>[[File:20130108_Cauldron_2.jpg|200px]] </center><br />
* En árbol<br />
|<br />
* '''Clon #100.01''': <font color="#0000FF">Cauldron</font><br />
* '''Lugar''': Colmenar Viejo (Madrid)<br />
* '''Familia''': Prusa I2<br />
* '''Generación''': 2<br />
* '''Autor''': José Ramón (JRmaciasCW)<br />
* '''Impresora progenitora''': Carbonite<br />
* '''Nacimiento''': 19/Dic/2012<br />
* [[Clone_wars:_Cauldron | Mas información]]<br />
| <center>[[File:Cauldron-icon_128.png|200px]]</center><br />
|---------<br />
| <center>[[File:Nabla.jpg|250px]]</center><br />
|<br />
* '''Clon #198:''' <font color="#0000FF"> '''Nabla'''</font>.<br />
* '''Modelo''': Prusa I2<br />
* '''Autor''': Miguel Ángel Fernández Rodríguez [[User:MAfernandezCW | (MafernandezCW)]]<br />
* '''Lugar''': Granada<br />
* '''Impresora Progenitora''': GrBot-3D[http://www.reprap.org/wiki/Clone_Wars:_Impresora_GrBot3D]<br />
* '''Electrónica''': Ramps 1.4/Mega<br />
* '''Firmware''': Sprinter superstable.<br />
* '''Hot-End''': J-Head 0.5mm<br />
* '''Nacimiento:''' 30 de Abril de 2013<br />
* '''Descendencia''': Yavin[http://www.reprap.org/wiki/Clone_wars:Impresora_Yavin]<br />
* [http://reprap.org/wiki/Clone_Wars:_Impresora_Nabla MAS INFORMACIÓN]<br />
| <center>[[File:Nabla.png]]</center><br />
|---------<br />
|<center>[[File:EA5PABLO.png|150px]]</center> <br />
|<br />
* '''Clon #138:''' <font color="#0000FF"> '''EA5'''</font>.<br />
* '''Lugar:''' Murcia<br />
* '''Tipo:''' [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Autor:''' Pablo Otón Zamora<br />
* '''Impresora progenitora:''' Mardan<br />
* '''Nacimiento:''' 30/Enero/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Extrusor:''' Jonaskuehling extruder <br />
* '''Hot-End:''' Budaschnozzle Gallego<br />
|<center>[[File:Cs-hyde-kapton-double-sided-silicone-adhesive-tape-amber-12-inch-x-36-yards.jpg|150px]]</center><br />
|---------<br />
|---------<br />
|<center>[[File:Venturprint_Jedi2.jpg|250px]]</center> <br />
Recorte: Chema<br />
|<br />
* '''Clon #181:'''<font color="#0000FF">'''-VENTURPRINT-'''</font><br />
* '''Modelo:''' [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] It2<br />
* '''Autor:''' [[User: ClampareroCW]] - Carlos Lamparero<br />
* '''Lugar:''' Colmenar Viejo (Madrid)<br />
<br />
* '''Impresora progenitora:''' Clon #134 "Giskard"<br />
* '''Generación:''' 5<br />
* '''Nacimiento:''' 23/03/2013<br />
* '''Descendencia:''' Clon #238 "FrankenPrusa"<br />
<br />
** '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
** '''Firmware:''' Marlin 1.0<br />
** '''Hot-End:''' Budas Gallego<br />
|<center>[[File:venturprint.png|200px]]</center><br />
|---------<br />
| <center>[[File:Gort_201309.jpg|150px]]</center> <br />
|<br />
* '''Clon #185''': [[Clone wars:Impresora_Gort/es|'''Gort''']]<br />
* '''Lugar''': Madrid. Madrid.<br />
* '''Familia''': [http://www.reprap.org/wiki/Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame Prusa Iteration 3 - Single Plate]<br />
* '''Generación''': 3<br />
* '''Autor''': Jose M. Martín<br />
*'''Impresora progenitora''': [[Clone wars: Impresora Uterus | Úterus]]<br />
* '''Nacimiento:''' 3 de Abril de 2013<br />
* '''Descendencia:''' Clon #320 "Shai-Hulud"<br />
* '''Electrónica''': [http://arduino.cc/en/Main/ArduinoBoardMega2560 Arduino Mega 2560] + [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Extrusor''': Greg's Wade extruder for Prusa i3<br />
* '''Hot-End''': [http://shop.reclone3d.com/es/extrusores-y-hot-ends/104-hispania.html J-Head hispania]<br />
* '''Firmware''': Marlin<br />
* '''Primer juego de piezas completo para descendencia: 31/10/2013<br />
| <center>[[File:CloneWars_GORT.jpg|150px]]</center><br />
|---------<br />
|}<br />
<br />
=== Jedi Masters ===<br />
<br />
* '''Descripción''': Clones totalmente operativos, que han impreso al menos 1 juego de piezas para construir otro clon.<br />
* '''Para subir de categoría''': Tener descendencia. Se debe parir un clon completo (totalmente operativo)<br />
<br />
{| class="wikitable" style="width:100%"<br />
|---------<br />
| <center>[[File:Clone-52-carbonite.png|200px|Carbonite Team]]</center> <br />
|<br />
* '''Clon #52''': '''<font color="#0000FF">Carbonite</font>'''<br />
* '''Lugar''': Alcalá de Henares - Madrid<br />
* [http://www.complubot.org Asociación de Robótica Educativa Complubot]<br />
*'''Familia''':[[Clone wars: Prusa Mold|Prusa Mold]]<br />
* Autores: <br />
** Nerea de la Riva<br />
** Iván Gallego<br />
** Eduardo Gallego (el que compra las cosas)<br />
*'''Nacimiento''': 25 de septiembre de 2012<br />
* [[Clone wars: Impresora Carbonite|MÁS INFORMACIÓN]]<br />
|<center> [[File:Avatar_complubot.png|150px|link=http://www.complubot.org]]</center><br />
|------------- <br />
| <center>[[File:Clon-71-Liperap.jpg|250px]]</center> <br />
|<br />
* '''Clon #71 ''': <font color="#0000FF">LipeRap</font><br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': Prusa Iteracion 2<br />
* '''Autor''': Pedro Clemente<br />
* '''Impresora progenitora''': Cadesign<br />
* '''Nacimiento''': 22/Oct/2012<br />
|<center>[[File:Liperap-logo.png|250px]]</center> <br />
|---------<br />
| <center>[[File:Clon-43-Tron.jpg|200px]]</center> <br />
|<br />
* '''Clon #43''': [[Clone_Wars:_Tron|'''Tron''']]<br />
* Lugar: Madrid<br />
* Tipo: Prusa iteration 2<br />
* Autor: Ramon Rivas, Edgar Salas y Guillermo Welch (G.W.C.).<br />
* '''Impresora progenitora''': [[Clone wars:Impresora Death Star|Death Star]]<br />
* Nacimiento: 4 de Septiembre de 2012<br />
* [[Clone wars:_Tron|MÁS INFORMACIÓN]]<br />
|<center> [[File:TronLogo.png|200px]]</center><br />
|----------<br />
| <center>[[File:nazgul_hijo_de_manuela.jpg|250px]]</center><br />
* En Arbol<br />
|<br />
* '''Clon #100.07''': <font color="#0000FF">Nazgul hijo de Manuela</font><br />
* '''Lugar''': Irún<br />
* '''Familia''': Prusa Iteration 2<br />
* '''Generación''': 2<br />
* '''Autor''': Ángel Andrés Lerena Pariente<br />
* '''Impresora progenitora''': Manuela<br />
* '''Nacimiento''': 28/Dic/2012<br />
| <center>[[File:nazgul.jpg|250px]]</center> <br />
|-------------<br />
| <center>[[File:Kneesaa.jpg|220px]]</center><br />
|<br />
* '''Clon #58''': '''<font color="#0000FF">[http://www.reprap.org/wiki/Clon_Wars:_Impresora_Kneesaa Kneesaa]</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 2<br />
* '''Autor''': Roberto Cancela (Maxit)<br />
* '''Impresora Progenitora''': [http://www.mbrobotics.es/Wiki/index.php?title=JOHNNY5 JOHNNY5]<br />
* '''Nacimiento''': '''25/Octubre/2012''' a las 16:00<br />
| <center>[[File:Kneesa-avatar.jpg|180px]]</center><br />
|--------------<br />
| <center>[[File:Dokesprinter.JPG|250px]]</center><br />
*Asignado: ok<br />
*Recortador : Doke<br />
| <br />
* '''Clon #129:''' <font color="#0000FF">DOKE</font> <br />
* '''Lugar:''' Bilbao, España<br />
* '''Modelo:''' Prusa Iteration 2<br />
* '''Autores:''' David Deza y Nerea Calvo<br />
* '''Impresora progenitora:''' Daniel3-Law<br />
* '''Generación:''' 3<br />
* '''Nacimiento''':27/Enero/2013<br />
|<center>[[File:Doke logo.jpg|250px|link=http://d0ke.wordpress.com]]</center><br />
|--------------<br />
| <center>[[File:Ariel-i3 WEB.jpg|150px]]</center> <br />
|<br />
* '''Clon #164:'''<font color="#0000FF">'''ARIEL'''</font>.<br />
* '''Lugar''': Vila-real<br />
* '''Tipo''': Prusa it3 con marco de madera<br />
* '''Autor''': Arturo Sancho<br />
* '''Impresora progenitora: Giskard<br />
**'''Nacimiento:''' 02/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End''': JHead 0,5<br />
|<center> [[File:Avatar.jpg|150px]]</center><br />
|--------------<br />
| <center>[[File:Clon-74-LAAT.jpg|200px]]</center> <br />
|<br />
* '''Clon #74''': <font color="#0000FF">LAAT</font><br />
* '''Lugar''': Mislata ( Valencia )<br />
* '''Familia''': Prusa Iteration 2<br />
* '''Autor''': Jorge Balaguer y Antonio Carbonell ( [ http:\\blog.2nand.com 2nand ] )<br />
* '''Impresora progenitora''': X-Wing<br />
* '''Nacimiento''': 20-11-2012<br />
* [[Clone Wars:Impresora LAAT|Mas información]]<br />
| | <center>[[ File: laat2.jpg | 150px]]</center> <br />
|--------------<br />
|<center>[[File:R4i3.jpg|250px]]</center> <br />
|<br />
* '''Clon #190:''' <font color="#0000FF">'''R4i3'''</font>.<br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa i3<br />
* '''Autores''': Juan Gonzalez y Andrés Prieto-Moreno<br />
* '''Impresora progenitora''': R3<br />
* '''Nacimiento''': 13 de abril de 2013<br />
* [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:_R4i3 MAS INFORMACIÓN]<br />
|<center>[[File:250px-R4 negtd.jpg|150px]]</center><br />
|-------------<br />
| <center>[[File:Abarthi2.jpg|250px]]</center><br />
|<br />
* '''Clon #146:'''<font color="#0000FF">''' Abarth'''</font>.<br />
* '''Lugar:''' Castell de guadalest (Alicante)<br />
* '''Tipo:''' Prusa Iteration 2 [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2]<br />
* '''Autor:''' Josep Balaguer<br />
* '''Impresora progenitora:''' Mardan [http://www.reprap.org/wiki/Clone_wars:Impresora_Mardan]<br />
*'''Nacimiento:''' 12/12/2012<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' Marlin<br />
* '''Hot-End:''' Budas Gallego 2ºGeneración // Farynozzle 2.0<br />
|<center>[[File:Abarth.jpg|250px|200px]]</center><br />
|---------<br />
|<center></center><br />
|<br />
* '''Clon #191:''' <font color="#0000FF">'''Zoltan'''</font>.<br />
* '''Lugar''': Rivas Vaciamadrid, Madrid.<br />
* '''Familia''': Prusa iteracción 2<br />
* '''Generación''': 3<br />
* '''Autor''': Alberto Otero <br />
*'''Impresora progenitora''': Clon #100.01 Cauldron<br />
* '''Nacimiento:''' 14 de Abril de 2013<br />
* '''Electrónica''': [[Ramps 1.4]]<br />
* '''Hot-End''': Farynozzle 2.0<br />
* '''Firmware''': Sprinter<br />
|<center>[[File:Zoltan.jpg|150px]]</center><br />
|---------<br />
|------<br />
| <center>[[File:Clockwork_Orange.jpg|250px]]</center><br />
|<br />
* '''Clon #180:'''<font color="#0000FF">''' -Clockwork Orange-'''</font>.<br />
* '''Lugar''': Navarra<br />
* '''Tipo''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Autor''': Xherry<br />
* '''Impresora progenitora:''' ""Black Knight"" <br />
* '''Generación''': 5<br />
**'''Nacimiento:''' 03/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End''': Budas Chino de Fabster3d<br />
|<center>[[File:A_clockwork_orange_wallpaper.jpg|150px]]</center><br />
|---------<br />
| <center>[[File:Oktopus2.jpg|250px]]</center><br />
|<br />
* '''Clon #172:'''<font color="#0000FF">''' [http://www.reprap.org/wiki/User:SbarrasCW Oktopus]'''</font>.<br />
* '''Lugar''': Madrid Centro<br />
* '''Tipo''': Prusa I2<br />
* '''Autor''': sbarrasCW (Sergio Barras)<br />
* '''Generación''': 3<br />
* '''Impresora progenitora:''' [http://www.reprap.org/wiki/Clone_wars:Impresora_Mardan Mardan]<br />
**'''Nacimiento:''' 01/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End:''' Budas Chino<br />
| <center>[[File:Oktopus.jpg|150px]]</center><br />
|---------<br />
|| <center>[[File:toxina.jpg|250px]]</center><br />
|<br />
* '''Clon #217''': '''<font color="#0000FF">TOXINA</font>'''<br />
* '''Modelo''': Prusa IT2<br />
* '''Autor''': Vicente Centeno [[User:Chentinox | (ChentinoX)]]<br />
* '''Lugar''': Cantabria<br />
* '''Impresora Progenitora''': [[ Toxic Grx]] <br />
* '''Nacimiento''': '''15/Abril/2013'''<br />
* '''Electrónica''': RAMPS 1_4<br />
* '''Firmware''': Sprinter <br />
* '''Extrusor''': Jonaskuehling extruder<br />
* '''Hot-End''': V5<br />
<br />
<br />
| <center> [[File:toxina_kit.jpg|250px]]</center><br />
|--------<br />
{{Template:CloneWars_clon|154|[http://www.reprap.org/wiki/Clone_wars:_Impresora_Wicket Wicket W. Warrick]|[http://www.reprap.org/wiki/Clone_wars:_Prusa Prusa Iteración 2]|3|21/Feb/2013|Juan Carlos Gavari Starkie|[http://www.reprap.org/wiki/Clone_wars:Impresora_Uterus Úterus]|Barcelona|[http://www.reprap.org/wiki/Clone_wars:_Impresora_Wiket W. Warrick MAS INFORMACION]|File:impresora2.jpg|File:150px-Wicket rotj.jpg}}<br />
|--------<br />
| <center>[[File:PortaBee-Grillo.jpg|200px]]</center> <br />
|* '''Clon #202''': '''<font color="#0000FF">Grillo</font>'''<br />
* '''Modelo''': PortaBee<br />
* '''Autor''': Miguel Herranz [Gredos]<br />
* '''Lugar''': Madrid (Vallecas)<br />
* '''Impresora progenitora''': [[Art-e-Facto]]<br />
* '''Nacimiento''': 25/04/2013<br />
* '''Electrónica''': Ramps 1.4 <br />
* '''Firmware''': Marlin<br />
* '''Hot-End''': J-Head MkV Chino<br />
* '''Juegos piezas:''' Antonio IB (Prusa I2, blanco) - Rubén Boluda (Prusa I2, blanco y negro)<br />
| <center>[[File:X-Wing.jpg|150px]]</center> <center></center><br />
|--------<br />
| <center></center> <br />
|* '''Clon #203''': '''<font color="#0000FF">Prusilio</font>'''<br />
* '''Modelo''': Prusa i2<br />
* '''Autor''': aliveandwell (Eduardo Dávila)<br />
* '''Lugar''': Tenerife<br />
* '''Nacimiento''': 20/06/2013<br />
* '''Electrónica''': Ramps 1.4 <br />
* '''Firmware''': Sprinter Superstable<br />
* '''Hot-End''': Farynozzle<br />
* '''Extrusor''': Jonaskuehling extruder<br />
| <center></center><center></center><br />
|---------<br />
| <center></center> <br />
|* '''Clon #237''': '''<font color="#0000FF">Caragolet de l'Oest</font>'''<br />
* '''Modelo''': Prusa i2<br />
* '''Autor''': Francesc Adell<br />
* '''Lugar''': Almenar (Lleida)<br />
* '''Impresora progenitora''': Desconocida<br />
* '''Nacimiento''': 17/7/2013<br />
* '''Electrónica''': Ramps 1.4 + Arduino Mega 2560 <br />
* '''Firmware''': R2R Sprinter<br />
* '''Extrusor''': Wade extruder<br />
| <center></center><center></center><br />
|---------<br />
| <center>[[File:000116.jpg]]</center><br />
|<br />
* '''Clon #228''': <font color="#0000FF">PROTEUS</font><br />
* '''Lugar''': Cuenca<br />
* '''Modelo''': (iteración 2)<br />
* '''Autor''': PlahuertaCW<br />
* '''Impresora progenitora''': Desconocida<br />
** '''Nacimiento''': 30/06/2013<br />
** '''Electrónica''': Arduino Mega + Ramps 1.4<br />
** '''Firmware''': Sprinter<br />
** '''Software''': Repetier-host+ Skeinforge<br />
** '''Extrusor''': Jonaskuehling<br />
** '''Hot-End''': Buda-style v1.2<br />
| <center>[[File:000117.jpg]]</center><br />
<br />
|---------<br />
| <center>[[File:Yavin.jpg|150px|Estado Actual]]</center><br />
|<br />
* '''Clon #243''': '''<font color="#0000FF">Yavin</font>'''<br />
* '''Lugar''': Motril (Granada)<br />
* '''Modelo''': Prusa Mendel (interación 2)<br />
* '''Autor''': [http://david.dantoine.org David Colmenero] (D_Skywalk)<br />
* '''Impresora progenitora''': [[Clone Wars: Impresora Nabla|Nabla]]<br />
** '''Nacimiento''': 05/07/2013<br />
** '''Electrónica''': Arduino Mega + Ramps 1.4<br />
** '''Firmware''': Marlin<br />
** '''Software''': Slic3r<br />
** '''Extrusor''': Jonaskuehling<br />
** '''Hot-End''': Budaschnozzle 2.0 (lulzbot)<br />
<br />
* '''[[Clone wars:Impresora Yavin|Más Información - Ficha]]'''<br />
<br />
| <center>[[File:YavinLogo.jpg|200px|Planeta Yavin 4]]</center><br />
|---------<br />
| <center>[[File:VinciBot_reloaded.JPG|220px]]</center><br />
|<br />
* '''Clon #226''': <font color="#0000FF">vinciBot reloaded</font><br />
* '''Lugar''': Málaga<br />
* '''Modelo''': Prusa iteration 3<br />
* '''Autores''': F. Malpartida (fm)<br />
* '''Impresora progenitora''': Uterus + vinciBot<br />
** '''Nacimiento''': 18/6/2013<br />
** '''Electrónica''': Clone Wars electronics [[http://reprap.org/wiki/SAV_MKI SAV MkI]]<br />
** '''Firmware''': Marlin<br />
** '''Extrusor''': Greg's Wade reloaded<br />
** '''Hot-End''': j-head MKV<br />
| <center>[[File:VinciDuinoTeam.gif|100px]]</center><br />
|--------<br />
| <center>[[File:printfles_3.jpg|200px]]</center> <br />
|<br />
* '''Clon #201''': <font color="#0000FF">Printfles</font><br />
* '''Lugar''': Madrid (Collado Villalba)<br />
* '''Modelo''': Prusa iteration 2<br />
* '''Autor''': Pablo Bosch [[User: Pifles]]<br />
* '''Impresora progenitora''': Desconocida<br />
** '''Nacimiento''': 28/04/2013<br />
** '''Electrónica''': Ramps 1.4 <br />
** '''Firmware''': Marlin<br />
** '''Extrusor''': Jonaskuehling<br />
** '''Hot-End''': Buda 2.0 Chino<br />
* '''[[Clone wars:Impresora Printfles|Más Información - Ficha]]'''<br />
| <center>[[File:printfles_4.jpg|150px]]</center> <br />
|---------<br />
|<center>[[File:PrusaI3.jpg|200px]]</center><br />
|<br />
* '''Clon #246''' : <font color="#0000FF"> LA ISLA 3D Prusa IT3</font><br />
* '''Lugar''' : San Fernando (Cádiz)'''<br />
* '''Familia''' : Mendel Prusa Iteración 3'''<br />
* '''Autor''': [[User:AcrespoCW | Abdón Crespo Sánchez (AcrespoCW)]] <br />
* '''Nacimiento''' : 11 de Agosto de 2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4 + Pololus<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Greg's Wade extruder for Prusa i3 by Misan<br />
* '''Hot-End''' : Buda style v1.2, boquilla: 0,5mm y 0,4mm<br />
* '''Primer juego de piezas completo para descendencia: 06/10/2013<br />
* '''[[Clone_Wars:_Impresora_LA_ISLA_3D|MÁS INFORMACIÓN]]<br />
|<center>[[File:PrusaI3.jpg|200px]]</center><br />
|---------<br />
|<center>[[File:ASPrusa-actualizada.jpg|200px]]</center> <br />
|<br />
* '''Clon #271''' : <font color="#0000FF"> ASPrusa</font><br />
* '''Lugar''' : Palencia'''<br />
* '''Familia''' : Mendel Prusa Iteración 2'''<br />
* '''Autor''': danielgap<br />
* '''Impresora progenitora''': [http://www.reprap.org/wiki/Clone_wars:Impresora_Mardan Mardan]<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4 + Pololus<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling<br />
* '''Hot-End''' : Buda style v1.2, boquilla: 0,5mm<br />
|<center>[[File:Asprusa.jpg|200px]]</center><br />
|---------<br />
|<center>[[File:e03.jpg|200px]]</center> <br />
|<br />
* '''Clon #303''' : <font color="#0000FF"> E03</font><br />
* '''Lugar''' : Vinaròs (Castellón)<br />
* '''Familia''' : Prusa i3<br />
* '''Autor''': Victor Moliner<br />
* '''Impresora progenitora''': #223 TelarBot<br />
* '''Nacimiento''' : 15/11/2013<br />
* '''Electrónica''': Mega 2560 + Ramps 1.4 <br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling<br />
* '''Hot-End''' : Catnozzle<br />
|<center></center><br />
|}<br />
<br />
=== Jedis ===<br />
<br />
* '''Descripción''': Clones terminados, que hayan impreso al menos una pieza<br />
* '''Para subir de categoría''': Imprimir un juego de piezas completo para montar otro clon<br />
<br />
{| class="wikitable" style="width:100%"<br />
|---<br />
|<center>[[File:Clon GLaDOS.jpg|200px|link=Clone wars:Impresora GLaDOS]]</center><br />
|<br />
* '''Clon #6''': '''[http://en.wikipedia.org/wiki/GLaDOS GLaDOS]'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': [http://reprap.org/wiki/RepStrap Repstrap]<br />
* '''Generación''': 1<br />
* '''Autor''': Miguel Ángel Herranz<br />
* Nacimiento: '''02/Feb/2012'''<br />
* [[Clone wars:Impresora GLaDOS|MÁS INFORMACIÓN]]<br />
|<center> [[File:Glados.png|150px|link=Clone wars:Impresora GLaDOS]]</center><br />
|---<br />
|<center>[[File:Clon-Sonny-1.png|220px|link=Clone wars:Impresora Sonny]]</center><br />
|<br />
* '''Clon #8''': '''<font color="#0000FF">Sonny</font>'''<br />
* '''Luegar''': Universidad Carlos III de Madrid<br />
* '''Familia''': [[Prusa_Mendel_(iteration_1)]] original modificada con piezas V2<br />
* '''Generación''': 1.5<br />
* '''Tipo de aguja''': 0.35 mm<br />
* '''Universidad Carlos III de Madrid'''<br />
* '''Autor''': [http://sites.google.com/site/danielgomezlendinez/ Daniel Gómez]<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:MADRE MADRE]<br />
* Nacimiento: '''7/Febrero/2012'''<br />
* [[Clone wars:Impresora Sonny|MÁS INFORMACIÓN]]<br />
|<center> [[File:Sonny-yo-robot1.png|200px]]</center><br />
|---<br />
|<center>[[File:Clon debugger 01-r1.jpg|220px|]]</center><br />
|<br />
* '''Clon #11''': '''<font color="#0000FF">Debugger</font>'''<br />
* '''Lugar''': <br />
* '''Familia''': <br />
* '''Generación''': 1<br />
* '''Autor''':<br />
* '''Impresora Progenitora''': Desconocida<br />
* Nacimiento: '''28/Feb/2012 '''<br />
* [[Clone wars:Impresora Debugger|MÁS INFORMACIÓN]]<br />
|<center> [[File:obsonet_v1b.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Fenix-bot final 03.JPG|200px|]]</center><br />
|<br />
* '''Clon #12''': '''<font color="#0000FF">Fenix-bot</font>'''<br />
* '''Lugar''': Burgos<br />
* '''Familia''': <br />
* '''Generación''': 1<br />
* '''Autor''': Raúl Barral<br />
* '''Impresora Progenitora''': Desconocida<br />
* Nacimiento: '''11/Marzo/2012'''<br />
* [[Clone wars:Impresora Fenix-bot|MÁS INFORMACIÓN]]<br />
|<center> [[File:phoenixcolorsmallvs1.jpg|150px]]</center><br />
|---<br />
|<center>[[File:ATAT.jpg|220px]]</center><br />
|<br />
* '''Clon #14''': '''<font color="#0000FF">AT-AT</font>'''<br />
* '''Lugar''': <br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] original<br />
* '''Generación''': 1<br />
* '''Autor''': Xavier Tamarit<br />
* '''Impresora Progenitora''': Desconocida<br />
* Nacimiento: '''12/Abril/2012'''<br />
* [[Clone_wars:Impresora AT-AT|MÁS INFORMACIÓN]]<br />
|<center>[[File:At-at 23949NEG-2.jpg|200px]]</center><br />
|---<br />
|<center>[[File:Clon-18-han.png|200px]]</center> <br />
|<br />
* '''Clon #18''': '''<font color="#0000FF">Han</font>'''<br />
* '''Lugar''': Santa Bárbara (California, USA)<br />
* '''Familia''': Prusa iteración 2<br />
* '''Generación''': 2<br />
* Autor: [http://www.iearobotics.com/wiki/index.php?title=Andr%C3%A9s_Prieto-Moreno Andrés Prieto-Moreno Torres]<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel:_R2D2 R2]<br />
* '''Nacimiento''': 06/Mayo/2012 <br />
* [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_Han MAS INFORMACIÓN]<br />
|<center> [[File:Han solo.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Clon-22-Grifo-r1.jpg|200px]]</center> <br />
|<br />
* '''Clon #22''': '''<font color="#0000FF">Grifo</font>'''<br />
* '''Lugar''': Zamora <br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 1<br />
* Autores: <br />
** Abraham Alvaro Jimenez<br />
** Nerea Alvaro Santos (Mi Hija)<br />
* '''Impresora Progenitora''': Desconocida<br />
* '''Nacimiento''': 18/Mayo/2012<br />
* '''[[Clone_wars:Impresora Grifo|MÁS INFORMACIÓN]]<br />
|<center> [[File:grifo.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Impresora Lucy 2 Junio 2012.jpg|200px|]]</center><br />
|<br />
* '''Clon #24''': '''<font color="#0000FF">Lucy</font>'''<br />
* '''Lugar''': Universidad Autónoma de Madrid<br />
* '''Familia''': [http://www.iearobotics.com/wiki/index.php?title=Clone_wars:_Printrbot Printrbot]<br />
* '''Generación''': 2<br />
* '''Autor''': Carlos García Saura<br />
* '''Impresora Progenitora''': [[Clone wars:Impresora Halcón Milenario|Halcón Milenario]]<br />
* '''Nacimiento''': 01/Jun/2012<br />
* '''[[Clone wars:Impresora Lucy|MAS INFORMACIÓN]]'''<br />
|<center> [[File:Lucy.jpg|100px|]]</center><br />
|---<br />
|<center>[[File:Clon-25-Tiefighter.jpg|150px]]</center> <br />
|<br />
* '''Clon #25''': '''<font color="#0000FF">TIE Fighter</font>'''<br />
* TIE Fighters Squadron (Mother Ship: DeathStar)<br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa Mendel Iteracion 2<br />
* '''Generación''': 2<br />
* '''Autor''': Fernando Salceda (klonando)<br />
* '''Impresora Progenitora''': [[Clone wars:Impresora Death Star|Deathstar]]<br />
* '''Nacimiento''': 11/Jun/2012<br />
* [[Clone wars:_TIEFighter|MÁS INFORMACIÓN]]<br />
|<center> [[File:tiefighter.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Clon-27-SHODAN.png|200px]]</center> <br />
|<br />
* '''Clon #27''': '''<font color="#0000FF">SHODAN</font>'''<br />
* '''Lugar''': Universidad Politécnica de Madrid<br />
* '''Familia''': [[Prusa_Mendel_%28iteration_2%29|Prusa Iteración 2]]<br />
* '''Generación''': 3<br />
* '''Autor''': Jaime García (elgambitero)<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R3 R3]<br />
* '''Nacimiento''': 17/Jun/2012<br />
* [[Clone wars: Impresora SHODAN|MÁS INFORMACIÓN]]<br />
|<center> [[File:SHODAN.jpeg|150px]]</center><br />
|---<br />
|<center>[[File:Clon-28-Dedalo.jpg|200px]]</center> <br />
|<br />
* '''Clon #28''': '''<font color="#0000FF">Dédalo</font>'''<br />
* '''Lugar''': Universidad Carlos III de Madrid<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 1<br />
* '''Autor''': David Estévez (aka [http://www.thingiverse.com/DEF DEF])<br />
* '''Impresora Progenitora''': [http://www.iearobotics.com/wiki/index.php?title=Impresora_3D:PADRE PADRE]<br />
* '''Nacimiento''': 19/Jun/2012<br />
* [[Clone wars: Impresora Dédadlo|MÁS INFORMACIÓN]]<br />
|<center> [[File:daedalus_profile.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Clon-31-Prusa-popoulus.jpg|200px]]</center> <br />
|<br />
* '''Clon #31''': '''<font color="#0000FF">Prusa-Popoulus</font>'''<br />
* Lugar: Grecia<br />
* Familia: Prusa Mendel Iteration 2<br />
* Generación: 3<br />
* Impresora Progenitora: [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R3 R3]<br />
* Autor: Stathis Fotiadis<br />
* '''Nacimiento''': 30/Jun/2012<br />
* [[Clone wars:Impresora Prusa-popoulus|MÁS INFORMACIÓN]]<br />
|<center> [[File:Prusa-popoulus-logo.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Clon-33-P1.png|200px]]</center> <br />
|<br />
* '''Clon #33''': '''<font color="#0000FF">P1</font>'''<br />
* Lugar: Universidad Politécnica de Madrid<br />
* Familia: Printrbot original<br />
* Generación: 2<br />
* Impresora Progenitora: Granja de PrintrBot HQ<br />
* Autor: [http://www.iearobotics.com/wiki/index.php?title=Juan_Gonzalez:Main Juan González-Gómez] (Obijuan)<br />
* '''Nacimiento''': 11/Jul/2012<br />
* [http://www.iearobotics.com/wiki/index.php?title=Printerbot:_P1 MAS INFORMACION]<br />
|<center> [[File:P1.png|150px]]</center><br />
|---<br />
|<center>[[File:Clon-34-Marvin.png|200px]]</center> <br />
|<br />
* '''Clon #34''': '''<font color="#0000FF">Marvin</font>'''<br />
* Lugar: Universidad Carlos III de Madrid<br />
* Familia: Prusa Aire 2<br />
* Generación: 2<br />
* Impresora Progenitora: [[Clone wars:Impresora Mardan|Mardan]]<br />
* Autor: Martin Fodstad Stoelen<br />
* '''Nacimiento''': 12/Jul/2012<br />
* [[Proyecto:MAS INFORMACION|MAS INFORMACION]]<br />
|<center> [[File:marvin.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Clon-35-jP.jpg|200px]]</center> <br />
|<br />
* '''Clon #35''': '''<font color="#0000FF">jπ;</font>'''<br />
* Lugar: Universidad Carlos III de Madrid<br />
* Familia: Prusa Aire 2<br />
* Generación: 2<br />
* Impresora Progenitora: [[Clone wars:Impresora Maese Artorius|Maese Artorius]]<br />
* Autor: Itziar Lima Ramos y Juan Pablo Rodríguez García <br />
* '''Nacimiento''': 15/Jul/2012<br />
* [[Proyecto:MAS INFORMACION|MAS INFORMACION]]<br />
|<center> [[File:Jpi.jpg|150px]]</center><br />
|---<br />
|<center>[[File:Clon37-wendy.jpg|200px]]</center><br />
|<br />
*'''Clon #37''': '''<font color="#0000FF">Wendy</font>'''<br />
* Tipo: Prusa Air 2<br />
* Progenitora: Padre y Madre<br />
* Autor: Nieves Cubo (Nicuma)<br />
* Lugar: Universidad Carlos III de Madrid<br />
* '''Nacimiento''': 03/Agosto/2012<br />
* [[Clone wars:Impresora Wendy|MAS INFORMACIÓN]]<br />
|<center> [[File:Wendy printer.jpg]]</center><br />
|---<br />
|<center>[[File:Abe.jpg|200px]]</center><br />
|<br />
*'''Clon #38''': '''<font color="#0000FF">Abe</font>'''<br />
*''' Tipo''': Prusa Iteracion 2<br />
*'''Progenitora''': [http://fidelfraga.eu/content/impresora-3d Guaifi]<br />
*'''Autor''': Javier Rebollo (Jarec)<br />
*'''Lugar''': Alcala de Guadaira (Sevilla)<br />
* '''Nacimiento''': 11/Agosto/2012<br />
|<center> [[File:Abe's.png|200px]]</center><br />
|---<br />
|<center>[[File:Clon-40-gallia-canarnova.jpg|150px]]</center><br />
|<br />
*'''Clon #40''': '''<font color="#0000FF">Gallia</font>'''<br />
*''' Tipo''': Prusa Iteracion 2<br />
*'''Progenitora''': Madalena<br />
*'''Autor''': Enrique Zanardi<br />
*'''Lugar''': Tenerife<br />
* '''Nacimiento''': 25/Agosto/2012<br />
|<center> [[File:Gallia-logo.jpg|200px]]</center><br />
|---<br />
|<center>[[File:Clon-45-PrusaHowarto.jpg|200px]]</center> <br />
|<br />
* '''Clon #45''': '''<font color="#0000FF">Arquímedes</font>'''<br />
* '''Lugar''': Ibiza<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 3<br />
* '''Autor''': Diego Lao (Howarto)<br />
* '''Impresora Progenitora''': [[Clone wars:Impresora Mardan|Mardan]]<br />
* '''Nacimiento''': 6/9/2012 (acabada)<br />
* [[Clone wars: Impresora Por ahora sin nombre|MÁS INFORMACIÓN]]<br />
|<center> [[File:HowartoAvatar.png|150px]]</center><br />
|---<br />
|<center>[[File:Clon-50-C3po.jpg|200px]]</center> <br />
|<br />
* '''Clon #50''': [[Clone_Wars:_C3PO|'''C3PO''']]<br />
* Lugar: '''Madrid'''<br />
* Tipo: Hibrido PrintrBot-Larabot<br />
* Autor: Alvaro Lara<br />
* Impresora progenitora: Manuela<br />
* Nacimiento: 17 de Septiembre de 2012 <br />
|<center> [[File:C3po doblado.jpg|200px]]</center><br />
|---<br />
|<center>[[File:Clon-54-eve.png|200px]]</center><br />
|<br />
* '''Clon #54''': '''<font color="#0000FF">EVE (Nº6)</font>'''<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 2<br />
* '''Autor''': [http://www.mbrobotics.es/MbRobotics/Main.html MABLACK (Miguel Angel Berna Alberola)]<br />
* '''Impresora Progenitora''': [http://www.mbrobotics.es/Wiki/index.php?title=JOHNNY5 JOHNNY5] <br />
* '''Electrónica''': [http://reprap.org/wiki/Sanguinololu Sanguinololu]<br />
* '''Firmware''': [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Extrusor''': [http://reprap.org/wiki/Wade%27s_Geared_Extruder Wade's extruder] (plástico de 3mm)<br />
* '''Hot-End''': [http://reprap.org/wiki/J_Head_Nozzle J-Head Mk IV-B]<br />
* Nacimiento: '''09/Octubre/2012'''<br />
|<center>[[File:Eve.png|200px]]</center><br />
|---<br />
|<center>[[File:Clone-56-la-cosa.jpg|220px]]</center><br />
|<br />
* '''Clon #56''': '''<font color="#0000FF">La cosa</font>'''<br />
* '''Lugar''': Universidad Carlos III de Madrid<br />
* '''Familia''': Prusa Air 2<br />
* '''Generación''': 2<br />
* '''Autor''': Jorge Rodríguez Marín<br />
* '''Impresora Progenitora''': [[Impresora Progenitora: Demiurgo|Demiurgo]] y [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]]<br />
* '''Nacimiento''': '''30/Septiembre/2012''' a las 12:00<br />
* [[Impresora: la cosa|MÁS INFORMACIÓN]]<br />
|<center>[[File:La-Cosa.png]]</center><br />
|---<br />
|<center>[[File:Clone-57-Unicorn.jpg|220px]]</center><br />
|<br />
* '''Clon #57''': '''<font color="#0000FF">Unicorn</font>'''<br />
* '''Lugar''': Universidad Carlos III de Madrid<br />
* '''Familia''': Prusa Air 2<br />
* '''Generación''': 2<br />
* '''Autor''': [http://roboticslab.uc3m.es/roboticslab/persona.php?id_pers=72 Juan G. Victores]<br />
* '''Impresora Progenitora''': [[Impresora Progenitora: Demiurgo|Demiurgo]] y [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]]<br />
* '''Nacimiento''': '''20/Octubre/2012''' a las 23:00<br />
* [[Impresora: unicorn|MÁS INFORMACIÓN]]<br />
|<center>[[File:Clone-57-Unicorn-logo.png|180px]]</center><br />
|---<br />
|<center>[[File:Clon-59-JJmachine.png|220px]]</center><br />
|<br />
* '''Clon #59''': '''<font color="#0000FF">JJMachine</font>'''<br />
* '''Lugar''': Málaga<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 2<br />
* '''Autor''': JgemezCW y Jimmmenez<br />
* '''Impresora Progenitora''': Daneel 3-law<br />
* '''Nacimiento''': '''20/Octubre/2012''' a las 12:00<br />
* [MÁS INFORMACIÓN]<br />
|<center> [[File:JJlogo.png|180px]] </center><br />
|---<br />
|<center>[[File:Dolly_18_Todo_Montado.JPG|220px]]</center><br />
|<br />
* '''Clon #60''': '''<font color="#0000FF">Dolly</font>'''<br />
* '''Lugar''': Alicante<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 3<br />
* '''Autores''': J. Sevila, S. Ors<br />
* '''Impresora progenitora''': The Clon UA<br />
* '''Nacimiento''': '''29/Octubre/2012''' a las 21:00<br />
* '''Electrónica''': [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware''': [https://github.com/ErikZalm/Marlin Marlin]<br />
* '''Extrusor''': Jonaskuehling (plástico de 3mm)<br />
* '''Hot-End''': [http://reprap.org/wiki/J_Head_Nozzle#Mk_IV J Head Nozzle Mk IV]<br />
* [[Clone_wars:_Impresora_Dolly|MÁS INFORMACIÓN]]<br />
|<center>[[File:DollyLogo_clean2.png|180px]]</center><br />
|---<br />
|<center>[[File:Clon-61-conguito3d.jpg|220px]]</center><br />
|<br />
* '''Clon #61''': '''<font color="#0000FF">Conguito3D</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 2<br />
* '''Autores''': DDREAM<br />
* '''Impresora progenitora''': [http://www.mbrobotics.es/Wiki/index.php?title=JOHNNY5 JOHNNY5]<br />
* '''Nacimiento''': 25/Oct/2012<br />
* [[Clone wars: Impresora Conguito3D|MÁS INFORMACIÓN]]<br />
|<center>[[File:Conguito3D-logo.png|180px]]</center><br />
|---<br />
|<center>[[File:Clone-62-Hefesto.jpg|220px]]</center><br />
|<br />
* '''Clon #62''': '''<font color="#0000FF">Hefesto</font>'''<br />
* '''Lugar''': Madrid (UC3M)<br />
* '''Familia''': Prusa Air 2<br />
* '''Generación''': 2<br />
* '''Autores''': Fernando Cerezal (y los miembros de Clone Wars)<br />
* '''Impresora progenitora''': [[Impresora Progenitora: Demiurgo|Demiurgo]] y [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]]<br />
* '''Nacimiento''': '''31/Octubre/2012''' a la 1:30<br />
* [[Clone wars: Impresora Hefesto|MÁS INFORMACIÓN]]<br />
|<center>[[File:logoHefesto.jpg|180px]]</center><br />
|---<br />
|<center>[[File:Clon-64-Ironhide.jpg|200px|]]</center> <br />
|<br />
* '''Clon #64 ''': Irohide<br />
* '''Lugar''': Badajoz<br />
* '''Familia''': Prusa Mendel<br />
* '''Generación''': <br />
* '''Autor''': Ismael De Migel Cantero<br />
* '''Impresora progenitora''': Daneel-3-law<br />
* Nacimiento: '''26/10/2012'''<br />
* [http://imc9.blogspot.com.es/p/impresora-3d.html MÁS INFORMACIÓN]<br />
|<center>[[File:Ironhide.jpg|200px|]]</center> <br />
|---<br />
|<center>[[File:Orange_Juice.jpg|200px]]</center> <br />
|<br />
* '''Clon #65 ''': <font color="#0000FF">Orange Juice</font><br />
* '''Lugar''': Barcelona<br />
* '''Familia''': Prusa Iteracion 2 con extras:Estabilizador Z y LCD<br />
* '''Autor''': David F.<br />
* '''Impresora progenitora''': Desconocida<br />
* Nacimiento: '''2/11/2012'''<br />
|<center>[[File:Freshorange.jpg|100px]]</center> <br />
|---<br />
|<center>[[File:Clon-66-Nexus-6.jpg|250px]]</center> <br />
|<br />
* '''Clon #66 ''': <font color="#0000FF">Nexus 6</font><br />
* '''Lugar''': A Coruña<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Autor''': Milo Barral<br />
* '''Impresora progenitora''': Johnny 5<br />
* '''Nacimiento''': 03/11/2012<br />
|<center>[[File:Nexus-6-Replicants.jpg|200px]]</center> <br />
|---<br />
|<center>[[File:Clon-67-T-800.jpg|200px]]</center> <br />
|<br />
* '''Clon #67 ''': <font color="#0000FF">T-800</font><br />
* '''Lugar''': UC3M<br />
* '''Familia''': Prusa Air-2<br />
* '''Autor''': Antonio Castro Gómez<br />
* '''Impresora progenitora''': [[Impresora Progenitora: Demiurgo|Demiurgo]] y [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]]<br />
* '''Nacimiento''': 29/10/2012<br />
|<center>[[File:Terminator4.jpg|200px]]</center> <br />
|---<br />
|<center>[[File:Clon-68-Lolita.jpg|200px]]</center> <br />
|<br />
* '''Clon #68 ''': <font color="#0000FF">Lolita</font><br />
* '''Lugar''': UC3M<br />
* '''Familia''': Prusa Air-2<br />
* '''Autores''': David Cabrera Rodríguez y Patricia Alba Talaverano<br />
* '''Impresora progenitora''': [[Impresora Progenitora: Demiurgo|Demiurgo]] y [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]]<br />
* '''Nacimiento''': 04/11/2012<br />
|<center>[[File:Lolita-logo.png|200px]]</center> <br />
|---<br />
|<center>[[File:ReciClon.jpg|250px]]</center> <br />
|<br />
* '''Clon #69 ''': <font color="#0000FF">ReciClon</font><br />
* '''Lugar''': Sevilla<br />
* '''Familia''': Prusa Iteracion 2<br />
* '''Autor''': Antonio Escudero<br />
* '''Impresora progenitora''': Mardan<br />
* '''Nacimiento''': 05/11/2012<br />
|<center>[[File:recicle.jpg|250px]]</center> <br />
|---<br />
|<center>[[File:Clone-70-restaun3D.jpg|250px]]</center> <br />
|<br />
* '''Clon #70 ''': <font color="#0000FF">Restaun3D</font><br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': Prusa Iteracion 2<br />
* '''Autor''': Roberto Estaun Gil<br />
* '''Impresora progenitora''': x-wing<br />
* '''Nacimiento''': 09/Nov/2012<br />
|<center>[[File:Cjuan01.jpg|250px]]</center> <br />
|---<br />
|<center>[[File:Clon-72-terpsicore.jpg|250px]]</center> <br />
|<br />
* '''Clon #72''': <font color="#0000FF">Terpsícore (<font color="#00FF00">R.I.P</font>)</font><br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': [http://reprap.org/wiki/RepRapPro_Huxley/es RepRapPro Huxley]<br />
* '''Autor''': algspd (Javier Briz)<br />
* '''Impresora progenitora''': Daneel 3-law<br />
* '''Nacimiento''': 11/Nov/2012<br />
* [[Clone_wars:Impresora_Terpsicore|Mas información]]<br />
|<center>[[File:logo_impresora_terpsicore.jpeg|150px]]</center> <br />
|---<br />
|<center>[[File:Clon-73-bender-doblador-rodriguez.jpg|200px]]</center> <br />
|<br />
* '''Clon #73''': <font color="#0000FF">Bender Doblador Rodríguez</font><br />
* '''Lugar''': Santa Cruz de Tenerife<br />
* '''Familia''': Printrbot<br />
* '''Autor''': Julián García Roger<br />
* '''Impresora progenitora''': Desconocida<br />
* '''Nacimiento''': 10/Nov/2012<br />
* [[Clone_wars:Impresora_Bender_doblador_rodríguez|Mas información]]<br />
|<center>[[File:Bender Baby.jpg|150px]]</center> <br />
|---<br />
|<center>[[File:Clone-76-Arturo.jpg|200px]]</center> <br />
|<br />
* '''Clon #76''': <font color="#0000FF">Arturo</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Autor''': Daniel Vallejo Hernando<br />
* '''Impresora progenitora''': 3D-Prisa<br />
* '''Nacimiento''': 20/Nov/2012<br />
* [[Clone Wars:Impresora Arturo|MÁS INFORMACIÓN]]<br />
|<center>[[File:Clon-76-arturo-logo.png | 150px]]</center> <br />
|---<br />
|<center>[[File:Clone-77-alcar.jpg|200px]]</center> <br />
|<br />
* '''Clon #77''': <font color="#0000FF">Alcar</font><br />
* '''Lugar''': Barcelona<br />
* '''Familia''': <br />
* '''Autor''': Jose Sanchez Sanchez<br />
* '''Impresora progenitora''': Manuela<br />
* '''Nacimiento''': 25/Nov/2012<br />
|<center>[[File:Alcar-logo.png | 200px]]</center> <br />
|---<br />
|<center>[[File:Clon-78-Kubrick.jpg|200px]]</center> <br />
|<br />
* '''Clon #78''': <font color="#0000FF">Kubrick</font><br />
* '''Lugar''': Buenos Aires, Argentina<br />
* '''Familia''': Printrbot V2<br />
* '''Autor''': Javier Marquevichi<br />
* '''Impresora progenitora''': Úterus<br />
* '''Nacimiento''': 20/Nov/2012<br />
* [[Clone Wars: Impresora Kubrick|MÁS INFORMACIÓN]]<br />
|<center>[[File:Kubrick-logo.png | 200px]]</center> <br />
|---<br />
|<center>[[File:Clone-80-VirPrusa.jpg|200px]]</center> <br />
|<br />
* '''Clon #80''': <font color="#0000FF">VirPrusa</font><br />
* '''Lugar''': Dos Hermanas, Sevilla <br />
* '''Familia''': Prusa i2<br />
* '''Autor''': Francisco Montero<br />
* '''Impresora progenitora''': Michaelmas<br />
* '''Nacimiento''': 29/Nov/2012<br />
* [[Clone Wars: Impresora VirPrusa|MÁS INFORMACIÓN]]<br />
|<center>[[File:VirPrusa-logo-defecto.png | 200px]]</center><br />
|---<br />
|<center>[[File:Clon 81 Neutronium.jpg|200px]]</center><br />
|<br />
* '''Clon #81''': <font color="#0000FF">Neutronium</font><br />
* '''Lugar''': DLabs Zaragoza<br />
* '''Familia''': Prusa Iteracion 2<br />
* '''Autor''': Degenerated Labs<br />
* '''Impresora progenitora''': [[Clone_wars:Impresora_Daneel_3-law|Daneel 3-LAW]]<br />
* '''Nacimiento''': 6/Oct/2012<br />
|<center>[[File:Neutronium-logo.png|200px]]</center><br />
|---<br />
|<center>[[File:Clon-82-odomatic.jpg|200px]]</center> <br />
|<br />
* '''Clon #82''': <font color="#0000FF">od-O-matic</font><br />
* '''Lugar''': Albacete<br />
* '''Familia''': Prusa Air 2<br />
* '''Autor''': Ricardo Monsalve<br />
* '''Impresora progenitora''': leapy<br />
* '''Nacimiento''': 2/Dic/2012<br />
|<center>[[File:Odomatic-logo.png|200px]]</center><br />
|---<br />
|<center>[[File:Clon-83-droide-de-protocolo.jpg|200px]]</center> <br />
|<br />
* '''Clon #83''': <font color="#0000FF">Droide de Protocolo</font><br />
* '''Lugar''': [http://www.aerobot.org.es AEROBOT Club de Robótica], ETS Ingenieros Aeronáuticos, UPM<br />
* '''Familia''': Prusa 2<br />
* '''Responsable''': [http://madebyfrutos.wordpress.com/ Miguel Ángel de Frutos]<br />
* '''Impresora progenitora''': R2D2<br />
* '''Nacimiento''': 3/Dic/2012<br />
|<center>[[File:Logo_Aerobot.png|150px]]</center><br />
|---<br />
|<center>[[File:Clon-84-Acrylic3.jpg|200px]]</center> <br />
|<br />
* '''Clon #84''': <font color="#0000FF">Acrylic3</font><br />
* '''Lugar''': Valencia<br />
* '''Familia''': Prusa i3<br />
* '''Autor''': Miguel Sánchez (Misan)<br />
* '''Impresora progenitora''': Ukraine<br />
* '''Nacimiento''': 01/Dic/2012<br />
|<center>[[File:Photo.jpg|200px]]</center><br />
|---<br />
|<center>[[File:Clon-85-Maniotas.jpg|200px]]</center> <br />
|<br />
* '''Clon #85''': <font color="#0000FF">Maniotas</font><br />
* '''Lugar''': Vigo<br />
* '''Familia''': Prusa i2<br />
* '''Autor''': Pablo Martínez & Rita López <br />
* '''Impresora progenitora''': R2-Reloaded<br />
* '''Nacimiento''': 3/Dic/2012<br />
|<center>[[File:Maniotas.jpg|200px]]</center><br />
|---<br />
|<center>[[File:Clon-86-Machado.jpg|200px]]</center> <br />
|<br />
* '''Clon #86''': <font color="#0000FF">Machado</font><br />
* '''Lugar''': Pulpí, Almería<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 2<br />
* '''Autor''': Ramón López<br />
* '''Impresora progenitora''': Jhonny5 <br />
* '''Nacimiento''': 4/Dic/2012<br />
|<center>[[File:machado2.jpg|200px]]</center><br />
|---<br />
|<center>[[File:Clon-87-Roi.jpg|200px]]</center> <br />
|<br />
* '''Clon #87''': '''<font color="#0000FF">Roi</font>'''<br />
* '''Lugar''': CAEND (Arganda del Rey, Madrid)<br />
* '''Familia''': Prusa 2 con alguna pieza metálica mecanizada<br />
* '''Generación''': 3<br />
* '''Autor''': Juan Carlos Liébana (CAPI)<br />
* '''Nacimiento''': 4/Dic/2012<br />
* '''Impresora progenitora''': [http://reprap.org/wiki/Clone_Wars:_Othon Othon]<br />
* [[Clone_Wars:_Roi|'''MÁS INFORMACIÓN''']]<br />
|<center> [[File:LOGO-ROI2.png|200px]]</center><br />
|---<br />
|<center>[[File:Clon-88-Leapy.png|200px]]</center> <br />
|<br />
* '''Clon #88''': '''<font color="#0000FF">Leapy</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa Air 2<br />
* '''Generación''': 1<br />
* '''Autor''': LeapTo3D<br />
* '''Nacimiento''': 6/Oct/2012<br />
* '''Impresora progenitora''': Demiurgo<br />
* [[Clone Wars: Leapy|'''MÁS INFORMACIÓN''']]<br />
|<center> [[File:Leapy-logo.png|200px]]</center><br />
|---<br />
|<center> [[File:Clon-89-Alfa3p.jpg|200px]]</center><br />
|<br />
* '''Clon #89''': '''<font color="#0000FF">alfa 3P</font>'''<br />
* Lugar: Vigo, Galicia<br />
* '''Familia''': Prusa iteration 2 con mejoras de piezas<br />
* '''Generación''': 4<br />
* '''Autor''': [https://twitter.com/alexalfaya Alejandro Alfaya],[https://plus.google.com/u/0/117476712378301252435/posts Angel Gómez], [https://twitter.com/sdaf2 Alejandro Valiñas]<br />
* '''Impresora progenitora''': <font color="#0000FF">Laura Palmer</font><br />
* '''Nacimiento''': 6 Diciembre de 2012<br />
|<center> [[File:Logoalfa3P.jpg|150px]]</center><br />
<br />
{{Template:CloneWars_clon|90|Ester Píscole|Prusa Iteracion 3|3|6/Dic/2012|algspd (Javier Briz)|Daneel 3-law|Universidad de Zaragoza|Clone_wars:Impresora_EsterPiscole|File:Clon-90-esterpiscole.jpg|File:Logo_pulsar.png}}<br />
<br />
|----------<br />
| <center>[[File:Clon-91-Babbage.jpg|250px]]</center><br />
|<br />
* '''Clon #91''': <font color="#0000FF">Babbage</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Huxley<br />
* '''Autor''': Syvic<br />
* '''Impresora progenitora''': Desconocido (RepRapPro)<br />
* '''Nacimiento''': Algún día de Noviembre de 2012<br />
* [[Mas información]]<br />
| | <center>[[File:Charles-babbage-analytical-engine-model.jpg|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon-92-The-orange-printwork.jpg|250px]]</center><br />
|<br />
* '''Clon #92''': <font color="#0000FF">The Orange PrintWork</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa i2<br />
* '''Autor''': Iker Etxarte<br />
* '''Impresora progenitora''': 3D-Prisa<br />
* '''Nacimiento''': 09-Dic-2012<br />
* [[Mas información]]<br />
| | <center>[[File:The orange printwork logo.png|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon-93-Impresori.jpg|250px]]</center><br />
|<br />
* '''Clon #93''': <font color="#0000FF">Impresori</font><br />
* '''Lugar''': Palma de Mallorca<br />
* '''Familia''': Prusa i2<br />
* '''Generación'': 2<br />
* '''Autor''': Sasori Olkof <br />
* '''Impresora progenitora''': PacleMaker<br />
* '''Nacimiento''': 09-Dic-2012<br />
* [[Mas información]]<br />
| | <center>[[File:saso.jpg|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon-94-Moebius.jpg|250px]]</center><br />
|<br />
* '''Clon #94''': <font color="#0000FF">Moebius</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Generación'': 2<br />
* '''Autor''': Luis Macías<br />
* '''Impresora progenitora''': Úterus<br />
* '''Nacimiento''': 11-Dic-2012<br />
* [[Clone wars Impresora Moebius|Mas información]]<br />
| | <center>[[File:LogoMoebius.jpg|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon-95-litris-3D.png|250px]]</center><br />
|<br />
* '''Clon #95''': <font color="#0000FF">Litris 3D</font><br />
* '''Lugar''': Alicante<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Generación''': 2<br />
* '''Autor''': Salvador Lario<br />
* '''Impresora progenitora''': Mardan<br />
* '''Nacimiento''': 12-Dic-2012<br />
* [[Mas información]]<br />
| | <center>[[File:Litris3D logo.png|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon-96-Aitor.jpg|200px]]</center><br />
|<br />
* '''Clon #96''': <font color="#0000FF">Aitor</font><br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': Printrbot<br />
* '''Generación''': 4<br />
* '''Autor''': Aitor Hernández<br />
* '''Impresora progenitora''': Geek-X-truder<br />
* '''Nacimiento''': 16-Nov-2012<br />
* [[CloneWars: Impresora Aitor|Mas información]]<br />
| | <center>[[File:Aitor avatar.jpg|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon 97 Casillas 75.jpg|200px]]</center><br />
|<br />
* '''Clon #97''': <font color="#0000FF">Casillas 75</font><br />
* '''Lugar''': Casillas (Ávila)<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 2<br />
* '''Autor''': Borja Segovia<br />
* '''Impresora progenitora''': Plumabot y 3D-Prisa<br />
* '''Nacimiento''': 16/Dic/2012<br />
* [[Clonewars: Impresora Casillas 75|Mas información]]<br />
| | <center>[[File:Casillas-97-logo.png|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon 98 mama bot.png|250px]]</center><br />
|<br />
* '''Clon #98''': <font color="#0000FF">Mamabot</font><br />
* '''Lugar''': <br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 4<br />
* '''Autor''': Marcos Castillo<br />
* '''Impresora progenitora''': Geek-X-truder<br />
* '''Nacimiento''': 16/Dic/2012<br />
* [[Clone Wars: Papa quiero un robot: Mamabot|Mas información]]<br />
| | <center>[[File:Mamabot.jpg|200px]]</center> <br />
|----------<br />
| <center>[[File:Clon-99-lucas-clon.jpg|250px]]</center><br />
|<br />
* '''Clon #99''': <font color="#0000FF">Lucas Clon</font><br />
* '''Lugar''': Salamanca<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 4<br />
* '''Autor''': Antonio J. Lucas<br />
* '''Impresora progenitora''': Y-wing<br />
* '''Nacimiento''': 14/Dic/2012<br />
* [[Mas información]]<br />
| | <center>[[File:Lucas clon logo.png|250px]]</center> <br />
|----------<br />
| <center>[[File:Clone 100 ANYA.jpg|250px]]</center><br />
|<br />
* '''Clon #100''': <font color="#0000FF">ANYA</font><br />
* '''Lugar''': Alicante<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 3<br />
* '''Autor''': Jose Luis Martinez<br />
* '''Impresora progenitora''': Jhonny 5<br />
* '''Nacimiento''': Nov/2012<br />
* [[Mas información]]<br />
| <center>[[File:Logo-ANYA.jpg|250px]]</center> <br />
|----------<br />
| <center>[[File:Clon 100 2 aFroman-3D.jpg|250px]]</center><br />
En árbol<br />
|<br />
* '''Clon #100.02''': <font color="#0000FF">aFroman-3D</font><br />
* '''Lugar''': Getafe (Madrid)<br />
* '''Familia''': Printrbot v2<br />
* '''Generación''': 2<br />
* '''Autor''': Agustín Fernández (AromanCW)<br />
* '''Impresora progenitora''': 3D-GDAF<br />
* '''Nacimiento''': 19/Dic/2012<br />
* [[Clone_wars:_aFroman-3D | Mas información]]<br />
| <center>[[File:AFroman-3D-logo.png|250px]]</center> <br />
|----------<br />
| <center>[[File:Clon 100 03 Estherterrestre.jpg|250px]]</center><br />
En árbol<br />
|<br />
* '''Clon #100.03''': <font color="#0000FF">Estherterrestre</font><br />
* '''Lugar''': Asturias<br />
* '''Familia''': Printrbot v2 métrica<br />
* '''Generación''': 2<br />
* '''Autor''': Angel<br />
* '''Impresora progenitora''': [[Clone_wars:_Impresora_Potato | Potato]]<br />
* '''Nacimiento''': 19/Dic/2012<br />
* [[ Mas información]]<br />
| <center>[[File:Estherterrestre-logo.png|250px]]</center> <br />
|----------<br />
| <center>[[File:Clon-100.04-stitch.jpg|250px]]</center><br />
* En árbol<br />
|<br />
* '''Clon #100.04''': <font color="#0000FF">Stitch</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Printrbot v2 métrica<br />
* '''Generación''': 2<br />
* '''Autor''': Santiago Lopez<br />
* '''Impresora progenitora''': [[Clone_wars:_Impresora_Potato | Potato]]<br />
* '''Nacimiento''': 20/Dic/2012<br />
* [[ Mas información]]<br />
| <center>[[file:Stitch.png]]</center> <br />
|----------<br />
| <center>[[File:Clon-100.05-Cerberus.jpg|250px]]</center><br />
* En árbol<br />
|<br />
* '''Clon #100.05''': <font color="#0000FF">Cerberus</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 2<br />
* '''Autor''': Carlos Medina Moreno<br />
* '''Impresora progenitora''': 3D-Prisa<br />
* '''Nacimiento''': 21/Dic/2012<br />
* [[ |Mas información]]<br />
| <center>[[File:Logo cerberus.png|250px]]</center> <br />
|----------<br />
| <center>[[File:Clone-108-Lexmark printer.png|250px]]</center><br />
* En árbol<br />
|<br />
* '''Clon #100.08''': <font color="#0000FF">lexmark hijo de Gandalf</font><br />
* '''Lugar''': Martorell bcn<br />
* '''Familia''': prusa Iteration 2<br />
* '''Generación''': 2<br />
* '''Autor''':alex jimenez <br />
* '''Impresora progenitora''': Gandalf<br />
* '''Nacimiento''':15/dic/2012 <br />
<br />
| <center>[[File:Avatar_lexmark.jpg|250px]]</center><br />
|----------<br />
| <center>[[File:Grecobot.JPG|250px]]</center><br />
*Asignado: ok<br />
|<br />
* '''Clon #100.09''': <font color="#0000FF">Grecobot</font><br />
* '''Lugar''': Toledo (IES El Greco)<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 4<br />
* '''Autor''': César Rangil<br />
* '''Impresora progenitora''': Y-wing<br />
* '''Nacimiento''':25/dic/2012 <br />
|<center>[[File:logogrecobot.svg|250px]]</center><br />
|----------<br />
| <center>[[File:PENDIENTE.JPG|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #100.10''': <font color="#0000FF">Benlliure</font><br />
* '''Lugar''': Guadalajara<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 3<br />
* '''Autor''': Jose Antonio Quevedo Muñoz<br />
* '''Impresora progenitora''': Úterus<br />
* '''Nacimiento''':27/dic/2012 <br />
|<center>[[250px]]</center><br />
|----------<br />
| <center>[[File:CWMagrathea.JPG|250px]]</center><br />
*Asignado: ok<br />
|<br />
* '''Clon #100.11''': <font color="#0000FF">Magrathea</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': [http://www.reprap.org/wiki/Clone_wars:_Prusa_iteraci%C3%B3n_3 Prusa Iteración 3]<br />
* '''Generación''': X<br />
* '''Autor''': Mario Camou<br />
* '''Impresora progenitora''': Kit de [http://www.reprapsource.com RepRapSource.com]<br />
* '''Nacimiento''':28/dic/2012 <br />
* [[Clone wars:Impresora Magrathea|Más información]]<br />
|<center>[[File:Dont_panic.png|250px]]</center><br />
|----------<br />
| <center>[[File:Togusha.jpg|200px]]</center> <br />
*Asignado: ok<br />
*Recortador : Paclón<br />
|<br />
*'''Clon #100.12''': <font color="#0000FF">Tachikoma</font><br />
*'''Lugar''': Lanzarote (Canarias)<br />
*'''Familia''': Prusa iteración 2<br />
* '''Generación''': 3<br />
*'''Autor''': Jonás Rodriguez Placeres<br />
*'''Impresora progenitora:''': PacleMAKER<br />
*'''Nacimiento''': 28/Diciembre/2012<br />
*'''MÁS INFORMACIÓN'''<br />
| <center>[[File:Tachikoma_1.jpg|200px]]</center> <br />
|------------- <br />
| <center>[[File:Esfinger_printer.jpg|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #100.13''': <font color="#0000FF">Esfinger</font><br />
* '''Lugar''': Tomelloso, Ciudad Real<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 2<br />
* '''Autor''': Francisco Javier García<br />
* '''Impresora progenitora''': Mardan<br />
* '''Nacimiento''':28/dic/2012 <br />
|<center>[[File:Esfinger_avatar.JPG|250px]]</center><br />
|------------- <br />
| <center>[[File:Impresora_santiago_prego.jpg|250px]]</center><br />
*Asignado: ok<br />
*Recortador : Paclón<br />
|<br />
* '''Clon #100.14''': <font color="#0000FF">Pirate</font><br />
* '''Lugar''': Fene (A Coruña) <br />
* '''Familia''': Prusa Iteration 2 [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2]<br />
* '''Generación''': 3<br />
* '''Autor''': Santiago Prego<br />
* '''Impresora progenitora''': Uterus [http://www.reprap.org/wiki/Clone_wars:_Impresora_Uterus]<br />
* '''Nacimiento''':28/dic/2012 <br />
|<center>[[File:pirate.png|250px]]</center><br />
|----------<br />
| <center>[[File:Impresora_Bruno.JPG|250px]]</center><br />
Asignado: ok <br />
*RECORTANDO:ADANSCW<br />
|<br />
* '''Clon #100.15''': <font color="#0000FF">Bruno</font> <br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': PrintrBot<br />
* '''Generación''': 4<br />
* '''Autor''': Daniel Ferrer<br />
* '''Impresora progenitora''': Geek-X-truder<br />
* '''Nacimiento''':30/dic/2012 <br />
|<center>[[File:Avatar_Daniel_impresora_bruno.JPG|250px]]</center><br />
|----------<br />
| <center>[[File:Impresora_renovatio.jpg|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #100.16''': <font color="#0000FF">Renovatio</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': PrintrBot<br />
* '''Generación''': 3<br />
* '''Autor''': Julio Galarón<br />
* '''Impresora progenitora''': Úterus<br />
* '''Nacimiento''':31/dic/2012 <br />
* [[Clone Wars:_Impresora_Renovatio|MAS INFORMACIÓN]]<br />
|<center>[[250px]]</center><br />
¿Podeis hacerle un loguito de esos verdes? :P<br />
|<br />
|----------<br />
| <center>[[File:Porta3.jpg|250px]]</center><br />
*Asignado: ok<br />
*RECORTANDO:Adans<br />
|<br />
* '''Clon #100.17''': <font color="#0000FF">RinceWind</font><br />
* '''Lugar''': Valladolid<br />
* '''Familia''': PortaBee<br />
* '''Generación''': 3<br />
* '''Autor''': Macnetic<br />
* '''Impresora progenitora''': Michaelmas<br />
* '''Nacimiento''':31/dic/2012 <br />
|<center>[[File:Macnetic.png|250px]]</center><br />
|----------<br />
| <center>[[File:ClonX-Jaume.g.jpg|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #118''': <font color="#0000FF">"X"</font><br />
* '''Lugar''': Barcelona<br />
* '''Familia''': Prusa Mendel Interacción II<br />
* '''Generación''': 3<br />
* '''Autor''': Jaume G.<br />
* '''Impresora progenitora''': Johnny 5<br />
* '''Nacimiento''':01/enero/2013 <br />
|<center>[[File:ClonX-Jaume-Logo.jpg|250px]]</center><br />
|----------<br />
| <center>[[File:PENDIENTE.JPG|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #119''': <font color="#0000FF">PocketP3D</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Prusa Mendel Interacción II<br />
* '''Generación''': 2<br />
* '''Autor''': Julian Carrillo<br />
* '''Impresora progenitora''': Johnny 5<br />
* '''Nacimiento''':03/enero/2013 <br />
|<center>[[250px]]</center><br />
|----------<br />
| <center>[[File:Impresora_Exoudina3D.jpg|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #120''': <font color="#0000FF">Exoudina3D</font><br />
* '''Lugar''': Granada<br />
* '''Familia''': Mendel Prusa Iteración 2<br />
* '''Generación''': 4<br />
* '''Autor''': Juanma (Exodous)<br />
* '''Impresora progenitora''': Y-Wing<br />
* '''Nacimiento''':04/enero/2013 <br />
|<center>[[File:Exodous_fire.jpg|250px]]</center><br />
|----------<br />
<br />
| <center>[[File:3D-JAM.jpg|250px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #121''': <font color="#0000FF">3D-JAM</font><br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': Mendel Prusa Iteración 2<br />
* '''Generación''': 2<br />
* '''Autor''': Enrique Martinez<br />
* '''Impresora progenitora''': Gandalf the transparent [http://www.reprap.org/wiki/Clone_wars:_Impresora_Gandalf_the_transparent]<br />
* '''Nacimiento''':06/octubre/2012 <br />
| <center>[[File:Logo_3DJAM.jpg|200px]]</center><br />
|----------<br />
| <center>[[File:Khan.jpg|250px]]</center><br />
*Asignado: ok<br />
*Recortador:AdansCw<br />
|<br />
* '''Clon #123''': <font color="#0000FF">Khan</font><br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': Mendel Prusa Iteración 2<br />
* '''Generación''': 2<br />
* '''Autor''': Ignacio Mora<br />
* '''Impresora progenitora''': Rewok [http://www.reprap.org/wiki/Clone_wars:_Impresora_Rewok]<br />
* '''Nacimiento''':16/Enero/2013<br />
| <center>[[File:Imster.jpg|200px]]</center><br />
|----------<br />
| <center>[[File:Prusita2.jpg|250px]]</center><br />
*Asignado: ok<br />
*Recortador:AdansCw<br />
|<br />
* '''Clon #124:''' <font color="#0000FF">Queen Mother</font> <br />
* '''Lugar:''' Barcelona (Cataluña)<br />
* '''Modelo:''' [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Autor:''' Sjædric Moreno<br />
* '''Progenitor:''' Johnny#5<br />
* '''Generación:''' 2<br />
* '''Nacimiento''':20/Nov/2012<br />
* [[Clone Wars: Impresora Queen Mother|FICHA PERSONAL DE Queen Mother]]<br />
|<center> [[File:J5.jpg|200px]]</center><br />
<center> "Mi progenitor" </center><br />
|------------<br />
<br />
<br />
|-------------<br />
| <center>[[File:Blue_Blood.JPG|250px]]</center><br />
*Asignado: ok<br />
*Recortador:AdansCw<br />
|<br />
* '''Clon #126:''' <font color="#0000FF">Blue_Blood</font> <br />
* '''Lugar:''' Madrid<br />
* '''Modelo:''' Prusa Iteration 2<br />
* '''Autor: Jorge Fernández<br />
* '''Impresora progenitora:''' [http://www.reprap.org/wiki/Clone_wars:Impresora_Mardan Mardan]<br />
* '''Generación:''' 2<br />
* '''Nacimiento''':19/Enero/2013<br />
|<center> Blue_Blood, experimentado player de: </center><br />
<center>[[File:Blue_Blood2.jpg|220px]]</center><br />
<br />
|---------<br />
<br />
|-------------<br />
| <center>[[File:Foto_LdMPrinter_R_01.jpg|250px]]</center><br />
*Asignado: ok<br />
*Recortador:AdansCw<br />
|<br />
* '''Clon #127:''' <font color="#0000FF">LdMPrinter-R-01</font> <br />
* '''Lugar:''' Yecla<br />
* '''Modelo:''' Prusa Iteration 2<br />
* '''Autor:''' Gonzalo Hernández<br />
* '''Impresora progenitora:''' Desconocida<br />
* '''Generación:''' 1<br />
* '''Nacimiento''':23/Enero/2013<br />
|<center>[[250px]]</center><br />
|---------<br />
|<center>[[File:BD.jpg|250px]]</center><br />
*Asignado: ok<br />
*Recortador:AdansCw<br />
|<br />
* '''Clon #128:''' <font color="#0000FF">BLUE DEMON</font> <br />
* '''Lugar:''' Culiacan Sinaloa Mexico<br />
* '''Modelo:''' Prusa Iteration 2<br />
* '''Autor:''' Daniel Mercado<br />
* '''Impresora progenitora:''' Desconocida<br />
* '''Generación:''' 1<br />
* '''Nacimiento''':24/Enero/2013<br />
|<center>[[File:BDmask.png|250px]]</center><br />
|---------<br />
| <center>[[File:Gcast_1imprus.JPG|250px]]</center><br />
Asignado: ok<br />
| <br />
* '''Clon #130:''' <font color="#00FF00"> '''G-Cast'''</font><br />
* '''Lugar:''' Guadalajara, México<br />
* '''Modelo:''' [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Autor:''' MioCid (Fabian Vargas)<br />
* '''Impresora progenitora:''' Mardan [http://www.reprap.org/wiki/Clone_wars:Impresora_Mardan]<br />
* '''Generación:''' 2<br />
* '''Nacimiento:''' 28/Enero/2013<br />
* (Foto de impresora pendiente... pues se esta poniendo bella)<br />
| <center>[[File:GCast.png|180px]]</center><br />
|---------<br />
| <center>[[File:LCD CHU.jpg|150px]]</center> <br />
Asignado: ok<br />
|<br />
* '''Clon #131:''' <font color="#0000FF"> '''ChUnthor'''</font><br />
* '''Lugar:''' Igualada, Barcelona<br />
* '''Modelo:''' [http://www.reprap.org/wiki/Clone_wars:_Printrbot_v2 Printrbot V2]<br />
* '''Autor:''' User:Ocellet; Javier Pajares<br />
* '''Impresora progenitora:''' Hija de Geek-X-Truder, nieta de Úterus, bisnieta de R2D2<br />
* '''Generación:''' 4<br />
* '''Nacimiento:''' 22/Enero/2013<br />
* Foto de impresora pendiente... <br />
| <center>[[File:chuunthor.jpg|240px]]</center><br />
|---------<br />
| |<center>[[File:estado.jpg|150px]]</center><br />
Asignado: ok<br />
|<br />
* '''Clon #132:''' <font color="#0000FF"> '''Robotín'''</font><br />
* '''Lugar:''' Santa Cruz de Tenerife<br />
* '''Modelo:''' [http://www.reprap.org/wiki/Clone_wars:_Printrbot_v2 Printrbot V2]<br />
* '''Autor:''' [https://plus.google.com/u/0/110556455513477816958/posts Julián García Roger]<br />
* '''Impresora progenitora:''' [http://www.reprap.org/wiki/Clone_wars:Impresora_Bender_doblador_rodr%C3%ADguez Bender Doblador Rodríguez]<br />
* '''Generación:''' 2<br />
* '''Nacimiento:''' 26/Enero/2013<br />
| <center>[[File:Robotín.jpg|180px]]</center><br />
|---------<br />
<br />
{{Template:CloneWars_clon|134|Giskard|Prusa Iteracion 3|4|29/Enero/2013|Alejandro Suárez, Javier Briz|[[Clone wars:Impresora EsterPiscole|Ester Píscole]]|Universidad de Zaragoza|Clone wars:Impresora Giskard|File:Impresora_giskard.jpg|File:Logo_pulsar.png}}<br />
<br />
Asignado: ok<br />
<br />
{{Template:CloneWars_clon|135|Hydra|Prusa Iteration 2|3|30/Enero/2013|Sergi Pérez Labernia|Guaifi|Cornellà (Barcelona)|Clone wars: Impresora Hydra|File:Hydra_foto3.jpg|File:Obras.jpg}}<br />
<br />
Asignado: ok<br />
<br />
|---------<br />
<br />
| <center>[[File:Ladelprint.jpg|200px]]</center> <br />
Asignado: ok<br />
<br />
Recorte: Chema<br />
|<br />
* '''Clon #137:''' <font color="#0000FF"> '''LADELPRINT'''</font>.<br />
* '''Lugar:''' Sada (La Coruña).<br />
* '''Tipo:''' [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa2]<br />
* '''Autor:''' David Pousada<br />
* '''Impresora progenitora:''' Guaifi.<br />
* '''Nacimiento:''' 30/Enero/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/Sanguinololu/es Sanguinololu 1.3a]<br />
* '''Firmware:''' [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Hot-End:''' Polacosnozzle 0.5mm<br />
|<br />
|---------<br />
|<center>[[File:IMG 20130315 212951.jpg|150px]]</center> <br />
Asignado: ok<br />
Recorte: Chema<br />
|<br />
* '''Clon #139:''' <font color="#0000FF"> '''Plottercín3d'''</font>.<br />
* '''Lugar:''' Madrid<br />
* '''Tipo:''' [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* '''Autor:''' Carlos García Fernámdez CgarciaWC<br />
* '''Impresora progenitora:''' Othon<br />
* '''Nacimiento:''' 27/1/2013<br />
* '''Electrónica:''' Ramps 1.4<br />
* '''Firmware:''' ???<br />
* '''Extrusor:''' <br />
* '''Hot-End:''' Budas <br />
|<center>[[File:Logo_plottercin.jpg|150px]]</center><br />
|------------- <br />
| <center>[[File:JarJar2.jpg|150px]]</center> <br />
|* '''Clon #140:''' <font color="#0000FF"> '''Jar Jar #140'''</font>.<br />
<br />
* Lugar: Zarautz (Gipuzkoa)<br />
* Tipo: Prusa Iteration 2<br />
* Autor: Lizar Azkune<br />
* Impresora progenitora: [http://www.reprap.org/wiki/Clone_wars:Impresora_Mardan Mardan]<br />
* '''Nacimiento:''' 01/Febrero/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Extrusor:''' [http://reprap.org/wiki/Wade%27s_Geared_Extruder Wade's extruder] (plástico de 3mm)<br />
* '''Hot-End:''' [https://github.com/CADesigns/FaryNozzle-1.0 Farynozzle 1.0]<br />
|<center> [[File:Zara.png|150px]]</center><br />
<br />
{{Template:CloneWars_clon|141|El Trasto|Prusa Iteracion 2|4|03/Febrero/2013|Jorge Herrero Esteban-Infantes|[http://www.reprap.org/wiki/Clone_wars:Impresora_Mardan Mardan]|Madrid (Simancas)|Clone wars:Impresora Trasto|File:El_trasto.JPG|File:Diablete.jpg}}<br />
<br />
Asignado: ok<br />
Recorte: Chema<br />
<br />
{{Template:CloneWars_clon|142|Bruniik|Prusa Iteracion 2|4|05/Febrero/2013|Adrian R. (adroqui)|Y-Wing|St. Pere de Ribes (Barcelona)|Clone wars:Impresora Bruniik|File:PENDIENTE.JPG|File:PENDIENTE.JPG}}<br />
<br />
Asignado: ok<br />
|---------<br />
| <center>[[File:Matriuska.jpg|150px]]</center><br />
|<br />
* Lugar: Burgos<br />
* Tipo: Prusa Iteration 2<br />
* Autor: Manuel Bocos<br />
* Impresora progenitora: Daneel 3-law <br />
* '''Nacimiento:''' 10/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Extrusor:''' [http://reprap.org/wiki/Wade%27s_Geared_Extruder Wade's extruder] (plástico de 3mm)<br />
* '''Hot-End:''' comprado en reprap.cc<br />
* '''<font color="#0000FF">Alteraciones:</font>'''<br />
** Hotend 0.5mm tipo NISU <br />
** Poleas T2.5 y acoples eje Z en aluminio<br />
** Ajuste de hotend 10mm a extrusor 16mm con pasta CEYS superbarra multiusos.<br />
*[http://reprap.org/wiki/Clone_wars:Impresora_Matriuska MAS INFORMACIÓN]<br />
| |<center>[[File:cosa.jpg|150px]]</center> <br />
|---------<br />
<br />
|---------<br />
| <center>[[File:SprintFull.png|150px]]</center><br />
|* '''Clon #145:''' <font color="#0000FF"> '''SprintFull''</font>.<br />
* Lugar: Rivas (Madrid)<br />
* Tipo: Prusa Iteration 2<br />
* Autor: SkilFull<br />
* Impresora progenitora: Y-Wing<br />
* '''Nacimiento:''' 01/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Extrusor:''' [http://reprap.org/wiki/Wade%27s_Geared_Extruder Wade's extruder] (plástico de 3mm)<br />
* '''Hot-End:''' J-Head<br />
<br />
|<center>[[File:PENDIENTE.JPG|150px]]</center> <br />
<br />
<br />
|---------<br />
| <center>[[File:fradesamolder.jpg|150px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #147:'''<font color="#0000FF">''' fradesamolder'''</font>.<br />
* '''Lugar:''' Santiago de Compostela<br />
* '''Tipo:''' Prusa Iteration 2 [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2]<br />
* '''Autor:''' Juan Rodríguez (JrodriCW)<br />
* '''Impresora progenitora:''' Gandalf the transparent<br />
*'''Nacimiento:''' 10/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Hot-End:''' Polaco<br />
*[http://reprap.org/wiki/Clone_wars:fradesamolder MAS INFORMACIÓN]<br />
|<center>[[File:obras.jpg|250px|250px]]</center><br />
<br />
|---------<br />
| <center>[[File:Shmi skywalker b.jpg|150px]]</center><br />
|<br />
* '''Clon #148:'''<font color="#0000FF">''' Shmi Skywalker'''</font>.<br />
* '''Lugar:''' Pamplona<br />
* '''Tipo:''' Prusa Iteration 2 [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2]<br />
* '''Autor:''' Nicholas Dawe (MVX15)<br />
* '''Impresora progenitora:''' Manuena (Clon 10)<br />
*'''Nacimiento:''' 10/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' Marlin<br />
* '''Hot-End:''' J-Head MK V<br />
|<center>[[File:Darth.jpeg|250px|250px]]</center><br />
<br />
|---------<br />
| <center>[[File:Obras.jpg|150px]]</center><br />
|<br />
* '''Clon #149:'''<font color="#0000FF">''' LEM'''</font>.<br />
* '''Lugar:''' Murcia<br />
* '''Tipo:''' Prusa Iteration 2 [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2]<br />
* '''Autor:''' delcotron<br />
* '''Impresora progenitora:''' X-Wing e Y-Wing<br />
*'''Nacimiento:''' 04/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' Marlin<br />
* '''Hot-End:''' J-Head MK V<br />
<br />
| |<center>[[File:Lem.jpg|180px|180px]]</center><br />
<br />
|---------<br />
| <center>[[File:MeMe.JPG|150px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #150:'''<font color="#0000FF">''' MeMe'''</font>.<br />
* '''Lugar:''' Zaragoza<br />
* '''Tipo:''' Prusa Iteration 3 [http://www.reprap.org/wiki/Clone_wars:_Prusa_iteraci%C3%B3n_3]<br />
* '''Autor:''' Carlos Monreal (CADesigns)<br />
* '''Impresora progenitora:''' Ester Píscole y Giskard<br />
*'''Nacimiento:''' 16/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' [https://github.com/algspd/asimov/tree/master/impresoras/giskard/Sprinter Sprinter modificado por Pulsar]<br />
* '''Hot-End:''' [https://github.com/CADesigns/FaryNozzle-1.0 Farynozzle 1.0]<br />
| <center>[[File:Meme.gif|150px]]</center><br />
<br />
{{Template:CloneWars_clon|151|[http://www.reprap.org/wiki/Clone_Wars:_Impresora_morpi morpi]|[http://www.reprap.org/wiki/Clone_wars:_Printrbot_v2 Printrbot v2]|4|28/Ene/2013|José Ángel Martínez|[http://www.reprap.org/wiki/Clone_wars:_Impresora_Uterus Úterus]|Murcia|Clone wars:Impresora morpi|File:Obras.jpg|File:Obras.jpg}}<br />
<br />
{{Template:CloneWars_clon|152|[http://www.reprap.org/wiki/Clone_Wars:_Impresora_PenBot PenBot]|Prusa Iteration 2 [http://www.reprap.org/wiki/Clone_wars:_Prusa_iteraci%C3%B3n_2]|4|09/Feb/2013|Manuel Hidalgo (leobot)|[http://www.reprap.org/wiki/Clone_wars:_Impresora_Uterus Úterus]|Albacete|Clone wars:Impresora PenBot|File:FotoPenBot.jpg|File:PenBot01.jpg}}<br />
<br />
{{Template:CloneWars_clon|153|[http://www.reprap.org/wiki/Clone_wars:_Impresora_Ger-truder Ger-truder]|[http://www.reprap.org/wiki/Clone_wars:_Printrbot_v2 Printrbot v2]|4|20/Feb/2013|Antonio Morales|[http://www.reprap.org/wiki/Clone_wars:Impresora_Geek-X-truder Geek-X-truder]|Almeria|[http://www.reprap.org/wiki/Clone_wars:_Impresora_Ger-truder MAS INFORMACION]|File:Ger-truder-nacimiento.jpg|File:Ger-truder.jpg}}<br />
<br />
<br />
<br />
<br />
|--------<br />
<br />
<br />
|--------<br />
| <center>[[File:PrusaIcaro.JPG|150px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #156:'''<font color="#0000FF">''' ICARO'''</font>.<br />
* Modelo: [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2 Prusa Mendel IT 2]<br />
* Autor: Jose Manuel Martinez Ortega<br />
* Lugar: Novelda(Alicante)<br />
* Progenitor: Desconocido<br />
* Nacimiento: 22/02/2013<br />
* Electrónica: RAMPS 1.4<br />
* Firmware: Sprinter<br />
* Hot-End: J-HEAD MK IV <br />
| <center>[[File:icaro.jpg|150px]]</center><br />
<br />
|-------<br />
<br />
|---------<br />
| <center>[[File:butana.jpg|150px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #157:'''<font color="#0000FF">''' Butana'''</font>.<br />
* '''Lugar:''' Aranjuez<br />
* '''Tipo:''' [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2 Prusa Iteration 2]<br />
* '''Autor:''' Fernando Bueno<br />
* '''Impresora progenitora:''' [http://www.reprap.org/wiki/Clone_wars:_Impresora_3D-Prisa 3DPrisa]<br />
* '''Nacimiento:''' 24/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' Sprinter<br />
* '''Hot-End:''' Budaschnozzle 1.2<br />
* '''Descendencia: ''' Clon #286 - Butana Remix Tricolore (hija) y Clon #329 - Butana SmartRAP Mini (nieta)<br />
* '''[https://plus.google.com/photos/116817292850753768933/albums/5848989618489488385?authkey=CJK2ibT27Nvm2wE Fotos e info]'''<br />
| <center>[[File:logo_fbuenonet.png|150px]]</center><br />
|---------<br />
<br />
<br />
|---------<br />
| <center>[[File:La_foto5.JPG|150px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #100.58:'''<font color="#0000FF">''' Nida'''</font>.<br />
* '''Lugar:''' Alcala de Henares<br />
* '''Tipo:''' [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2 Prusa Iteration 2]<br />
* '''Autor:''' JJViton<br />
* '''Impresora progenitora:''' Clon #39 Daneel 3-law <br />
*'''Nacimiento:''' 10/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.3 RAMPS 1.3]<br />
* '''Firmware:''' Sprinter<br />
* '''Hot-End:''' Budas Gallego<br />
* '''Más info:''' [http://reprap.org/wiki/User:JvitonCW]<br />
<br />
|---------<br />
<br />
<br />
|---------<br />
| <center>[[File:Starken_big.JPG|150px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #159:'''<font color="#0000FF">''' Starken'''</font>.<br />
* '''Lugar:''' Valladolid<br />
* '''Tipo:''' [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2 Prusa Iteration 2]<br />
* '''Autor:''' Emilio José Morán Hevia<br />
* '''Impresora progenitora:''' Mardan<br />
*'''Nacimiento:''' 20/02/2013<br />
* '''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Firmware:''' Sprinter<br />
* '''Hot-End:''' J-head<br />
* '''Más info:'''<br />
| <center>[[File:STARKEN_logo.jpg|150px]]</center><br />
|---------<br />
|---------<br />
|<center>[[File:Impresora_greenhornet.jpg|250px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #160:''' ''''''Green Hornet''''''<br />
* '''Lugar''':la laguna -Tenerife<br />
* '''Tipo''': Prusa i2 [http://www.reprap.org/wiki/Clone_wars:_Prusa_Iteraci%C3%B3n_2]<br />
* '''Autor''': Andrés González Prérez<br />
* '''Impresora progenitora:[[Clone wars:Impresora X Wing|X-Wing]]<br />
**'''Nacimiento:''' 26/02/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Sprinter<br />
**'''Hot-End: J-HEAD MK IV <br />
** '''<font color="red">Pendiente:</font>'''<br />
*** Mejoras pantalla LCD<br />
*** Imprimir un juego de piezas completo para montar otro clon<br />
|<center>[[File:Green_hornet.jpg|250px]]</center><br />
<br />
<br />
<br />
<br />
|---------<br />
|---------<br />
|<center></center><br />
|<br />
* '''Clon #161:'''<font color="#0000FF">''' Ima'''</font>.<br />
* '''Lugar''':Ciudad Real<br />
* '''Tipo''': Prusa i2 <br />
* '''Autor''': Marciano de la Hoz<br />
* '''Impresora progenitora: Mardan<br />
**'''Nacimiento:''' 28/02/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Sprinter<br />
**'''Hot-End: J-HEAD MK IV modificado <br />
<br />
<br />
|<center></center><br />
<br />
<br />
<br />
|---------<br />
|---------<br />
|<center>[[File:Tramuntana3D.jpg|250px]]</center><br />
|<br />
* '''Clon #162:'''<font color="#0000FF">''' Tramuntana3D'''</font>.<br />
* '''Lugar''':Girona<br />
* '''Tipo''': Prusa I3 Single Plate Aluminio <br />
* '''Autor''': Lluís Vilarrúbies<br />
* '''Impresora progenitora: Ester Píscole<br />
**'''Nacimiento:''' 03/02/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Sprinter<br />
**'''Hot-End: budaschnozzle 1.2 0,5<br />
<br />
<br />
|<center>[[File:Obras.jpg|150px]]</center><br />
<br />
<br />
|---------<br />
|---------<br />
|<center>[[File:ImpresorahothI.JPG|250px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #163:'''<font color="#0000FF">''' Hoth I'''</font>.<br />
* '''Lugar''':Valencia<br />
* '''Tipo''': Prusa I2 <br />
* '''Autor''': Pau Chafer<br />
* '''Impresora progenitora: PacleMAKER<br />
**'''Nacimiento:''' 19/02/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Sprinter<br />
**'''Hot-End: PolacoNozzle<br />
<br />
<br />
|<center>[[File:LogoHoth1.jpg|250px]]</center><br />
<br />
<br />
<br />
|---------<br />
| <center>[[File:Obras.jpg|150px]]</center><br />
|<br />
<br />
* '''Clon #165:'''<font color="#0000FF">''' Goliath'''</font>.<br />
* '''Lugar''': Bilbao<br />
* '''Tipo''': Printrbot <br />
* '''Autor''': David Gonzalez (aka Ghosthawk)<br />
* '''Impresora progenitora: Tron<br />
**'''Nacimiento:''' 01/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End: Polaconozzle 0.5mm<br />
| <center>[[File:Goliath.gif|200px]]</center><br />
|---------<br />
| <center>[[File:ImpresoraKAZA.png|250px]]</center><br />
|<br />
* '''Clon #166:'''<font color="#0000FF">''' KAZA'''</font>.<br />
* '''Lugar''': Vigo (Alrededores más bien, pero bueno...XD)<br />
* '''Tipo''': Printrbot V2<br />
* '''Autor''': Valentín Cancelas, Gonzalo Alonso<br />
* '''Impresora progenitora: Gandalf the transparent ( Donación proyecto MultiExtruder )<br />
**'''Nacimiento:''' 03/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Sprinter<br />
**'''Hot-End: Polaconozzle<br />
| <center>[[File:Obras.jpg|150px]]</center><br />
|---------<br />
| <center>[[File:Obras.jpg|250px]]</center><br />
|<br />
* '''Clon #167:'''<font color="#0000FF">''' DRACO'''</font>.<br />
* '''Lugar''': Aguascalientes,Ags Mexico<br />
* '''Tipo''': Prusa I2<br />
* '''Autor''': Eduardo Alvarez<br />
* '''Impresora progenitora: MakerMex<br />
**'''Nacimiento:''' 03/02/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End: Polaconozzle<br />
| <center>[[File:Obras.jpg|150px]]</center><br />
|---------<br />
| <center>[[File:Obras.jpg|250px]]</center><br />
|<br />
* '''Clon #169:'''<font color="#0000FF">''' C-Wing'''</font>.<br />
* '''Lugar''': Manresa, España<br />
* '''Tipo''': Prusa I3<br />
* '''Autor''': [https://sites.google.com/a/pentabyte.es/chemadesigns/ Chema]<br />
* '''Impresora progenitora: Bumblebee<br />
**'''Nacimiento:''' 09/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End: Budas chino<br />
| <center>[[File:Chema.jpg|250px]]</center><br />
|---------<br />
| <center>[[File:Obras.jpg|250px]]</center><br />
|<br />
* '''Clon #170:'''<font color="#0000FF">''' B-Ri2-D2'''</font>.<br />
* '''Lugar''': Málaga<br />
* '''Tipo''': Prusa I2<br />
* '''Autor''': Israel Berrido Subires y Alejandro Berrido Suibires<br />
* '''Impresora progenitora: ¿?<br />
**'''Nacimiento:''' 10/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End: Budas Gallego (de Fidel)<br />
| <center>[[File:Obras.jpg|150px]]</center><br />
|---------<br />
| <center>[[File:Obras.jpg|150px]]</center> <br />
|* '''Clon #171:'''<font color="#0000FF">''' JENDRINATOR'''</font>.<br />
* '''Lugar''': Tarragona, España<br />
* '''Tipo''': Prusa I2<br />
* '''Autor''': AchornetCW (Adria Chornet)<br />
* '''Impresora progenitora: Michaelmas<br />
**'''Nacimiento:''' 12/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Sprinter<br />
**'''Hot-End: Polaco<br />
| <center> [[File:Logo_jendrinatorV1.jpg|150px]]</center><br />
|------<br />
| <center>[[File:Clon-172-UCOprinter.jpg|220px]]</center><br />
|<br />
* '''Clon #173''': '''<font color="#0000FF">UCOprinter</font>'''<br />
Pertenecio a la Reclone3d's Farm<br />
* '''Lugar''': Universidad de Córdoba<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 4<br />
* '''Autor''': Exergy123<br />
* '''Impresora Progenitora''': Y-Wing<br />
* Nacimiento: '''19/Enero/2013''' <br />
* [MÁS INFORMACIÓN]<br />
| <center>[[File:Logo_UCOprinter.jpg|200px]]</center><br />
|---------<br />
| <center>[[File:Clon-173-Pepabot.jpg|220px]]</center><br />
|<br />
* '''Clon #174''': '''<font color="#0000FF">Pepabot</font>'''<br />
* '''Lugar''': Universidad de Málaga<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 4<br />
* '''Autor''': Juanma Tirado<br />
* '''Impresora Progenitora''': Y-Wing<br />
* Nacimiento: '''19/Enero/2013''' <br />
* [MÁS INFORMACIÓN]<br />
| <center>[[File:Logo_Pepabot.jpg|200px]]</center><br />
|---------<br />
| <center>[[File:Clon-173-Z-Wing.jpg|220px]]</center><br />
|<br />
* '''Clon #175''': '''<font color="#0000FF">Z-Wing "El espíritu de Zaragoza</font>'''<br />
Pertenece a Reclone3d's Farm<br />
* '''Lugar''': Universidad de Málaga<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Generación''': 4<br />
* '''Autor''': Exergy123<br />
* '''Impresora Progenitora''': Reclone3d's Farm(X-Wing, Y-Wing y UCOprinter)<br />
* Nacimiento: '''19/Enero/2013''' <br />
* [MÁS INFORMACIÓN]<br />
| <center>[[File:Logo_Z-Wing.jpg|200px]]</center><br />
|---------<br />
| <center>[[File:Ldp.jpg|250px]]</center><br />
|<br />
* '''Clon #176:'''<font color="#0000FF">''' AT-TE_LDP- '''</font>.<br />
* '''Lugar''': [http://ldp.etsii.upm.es Laboratorio Desarrollo de Productos. Lab Prototipado Rápido. ETSI Industriales. UPM]<br />
* '''Tipo''': Prusa I2<br />
* '''Generación''': 2<br />
* '''Autor''': Pedro Ortego<br />
* '''Impresora progenitora:''' [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R3 R3]<br />
** '''Nacimiento:''' 21/03/2013<br />
** '''Electrónica''': [http://reprap.org/wiki/RAMPS_1.3 RAMPS 1.3]<br />
** '''Firmware''': Sprinter<br />
** '''Hot-End''': Buda 0.5 Menextech<br />
| <center>[[File:LDP_Dim.jpg|150px]]</center><br />
|---------<br />
|------<br />
| <center>[[File:ribosome.jpg|250px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #177:'''[http://www.reprap.org/wiki/Clone_wars:_Impresora_Ribosome <font color="#0000FF">''' Ribosome'''</font>].<br />
* '''Lugar''': Madrid<br />
* '''Tipo''': Prusa i3 Box Frame<br />
* '''Autor''': [http://www.reprap.org/wiki/User:yOPERO yOPERO] <br />
* '''Impresora progenitora:''' [http://www.reprap.org/wiki/Clone_wars:Impresora_Uterus Uterus] <br />
**'''Nacimiento:''' 19/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End: Budas Chino de Fabster3d<br />
| <center>[[File:Ribosome_logo.jpg|250px]]</center><br />
|---------<br />
|------<br />
| <center>[[File:Prusikito.jpg|250px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #178:'''[http://www.reprap.org/wiki/Clone_wars:_Impresora_Prusikito ''' Prusikito''']<br />
* '''Lugar''': Getafe (Madrid)<br />
* '''Tipo''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Autor''': Fernando Murillo y Elena de Pedro<br />
* '''Impresora progenitora:''' [http://www.reprap.org/wiki/Clone_wars:Impresora_Manuela Manuela] <br />
* '''Generación''': 4<br />
**'''Nacimiento:''' 22/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Marlin<br />
**'''Hot-End''': Budaschnozzle 1.2<br />
| <center>[[File:Logoprusikito.jpg|400px]]</center><br />
|---------<br />
|------<br />
| <center>[[File:Skullpt Foto.jpg|150px]]</center> <br />
Recorte: Chema<br />
|<br />
* '''Clon #179:'''<font color="#0000FF">''' -Skullpt-'''</font>.<br />
* '''Lugar''': Écija (Sevilla)<br />
* '''Tipo''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 2<br />
* '''Autor''': [[User:RalvarezCW]]<br />
* '''Impresora progenitora:''' : ? <br />
* '''Generación''': ?<br />
**'''Nacimiento:''' 24/03/2013<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' Sprinter SuperEstable<br />
**'''Hot-End''': Budaschnozzle 1.3<br />
| <center>[[File:Skullpt logo.jpg|150px]]</center><br />
|------<br />
| <center>[[File:IronHide30.jpg|250px]]</center><br />
Recorte: Chema<br />
|<br />
* '''Clon #182:'''<font color="#0000FF">'''Iron Hide 3.0'''</font>.<br />
* '''Lugar''': Vírgen de Guadalupe (Badajoz)<br />
* '''Tipo''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] Iteración 3<br />
* '''Autor''': Ismael De Miguel (Driftwr) <br />
* '''Impresora progenitora:''' ""IronHide"" <br />
* '''Generación''': <br />
**'''Nacimiento:''' ???<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' <br />
**'''Hot-End''': <br />
|<center>[[File:Obras.jpg|150px]]</center><br />
|---------<br />
|------<br />
|<center>[[File:tkl.jpg|200px]]</center><br />
|<br />
* '''Clon #183:'''<font color="#0000FF">'''- TKL 1.0 -'''</font>.<br />
* '''Lugar''': Madrid<br />
* '''Tipo''': [http://reprap.org/wiki/Prusa_Air_2] Air 2 - Iteration 2<br />
* '''Autor''': Angel Fdez (Trocolo) <br />
* '''Impresora progenitora:''' ""Bumblebee"" <br />
* '''Generación''': <br />
**'''Nacimiento:''' 21-03-13<br />
**'''Electrónica:''' [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
**'''Firmware:''' <br />
**'''Hot-End''': Budas-Chino<br />
|<center>[[File:gallina.jpg|150px]]</center><br />
<center>Cubo de Calibracion</center><br />
|---------<br />
|<center>[[File:KalosW.JPG|200px]]</center> <br />
|<br />
* '''Clon #184''': [[Clone wars:_Impresora_Kalos|'''Kalos''']]<br />
* '''Lugar:''' Algeciras (Cádiz)<br />
* '''Familia''': [http://www.reprap.org/wiki/Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame Prusa Iteration 3 - Single Plate]<br />
* '''Generación''': 3<br />
* '''Autor:''' Mariano Dapía ([http://twitter.com/iPadNanito @iPadNanito])<br />
* '''Impresora progenitora:''' [[Clone wars:_Impresora_MayPrinter|'''MayPrintr''']]<br />
* '''Nacimiento:''' 28 de Marzo de 2013 <br />
* '''Electrónica''': [http://www.reprap.org/wiki/Sanguinololu Sanguinololu 1.3a]<br />
* '''Firmware''': [http://www.reprap.org/wiki/Marlin Marlin]<br />
* '''Extrusor''': [http://www.thingiverse.com/thing:18379 Jonas Kuehling's Greg's Wade Reloaded] (3 mm Plastic)<br />
* '''Hot-End''': [http://www.reprap.org/wiki/J-Head J-Head Nozzle]<br />
| <center>[[File:Jarron.png|135px]]</center><br />
|---------<br />
| <center>[[File:FotoPrintFloyd.jpg|150px]]</center> <br />
|<br />
* '''Clon #186:''' <font color="#0000FF">'''Print Floyd'''</font>.<br />
* '''Lugar''': Zaragoza.<br />
* '''Familia''': Prusa iteracción 2<br />
* '''Generación''': 3<br />
* '''Autor''': Jorge Pascual<br />
*'''Impresora progenitora''': Clon #121: 3D-Jam<br />
* '''Nacimiento:''' 7 de Abril de 2013<br />
* '''Electrónica''': [http://arduino.cc/en/Main/ArduinoBoardMega2560 Arduino Mega 2560] + [http://reprap.org/wiki/RAMPS_1.4 RAMPS 1.4]<br />
* '''Hot-End''': J-Head MK V<br />
* '''Firmware''': Marlin<br />
| <center>[[File:Print_Floyd.jpg|150px]]</center><br />
|---------<br />
| <center>[[File:bruce.jpg|200px]]</center> <br />
|<br />
* '''Clon #188:''' <font color="#0000FF">'''BruceIsPrinting'''</font>.<br />
* '''Lugar''': Pontedeume (A Coruña).<br />
* '''Familia''': Prusa Iteración 2<br />
* '''Generación''': 5<br />
* '''Autor''': [[User:pinwi|Pinwi]]<br />
*'''Impresora progenitora''': Clon #79: SpongeBot<br />
* '''Nacimiento:''' 10 de abril de 2013<br />
* '''Electrónica''': [[Ramps 1.4]]<br />
* '''Hot-End''': J-Head MkV<br />
* '''Firmware''': [[Sprinter]]<br />
| <center>[[File:bruce2.jpg|200px]]</center><br />
|-------------<br />
|<center>[[File:capitanestado.jpg|270px]]</center> <br />
|<br />
* '''Clon #189:''' <font color="#0000FF">'''CAPITAN CRUNCH'''</font>.<br />
* '''Lugar''': Santiago de Compostela.<br />
* '''Familia''': Prusa Iteracion 2<br />
* '''Autor''': [[Miguif (Miguel Federico)]]<br />
* '''Impresora progenitora''': Clon #32: Guaifi<br />
* '''Nacimiento''': 12 de abril de 2013<br />
* '''<font color="#0000FF">Componentes:</font>'''<br />
** Electrónica: Arduino Mega + Ramps 1.4.<br />
** Hot-end: Jhead.<br />
** Firmware: Sprinter Obijuan. <br />
|<center>[[File:capitancrunch.jpg|200px]]</center><br />
|-------------<br />
| <center>[[File:SAV_Vader.jpg|200px]]</center> <br />
|<br />
* '''Clon #192:''' <font color="#0000FF"> '''SAV Vader'''</font>.<br />
* '''Lugar:''' Madrid.<br />
* '''Tipo:''' Prusa i3<br />
* '''Autor:''' CACER (Familia Cervilla)<br />
* '''Impresora progenitora:''' Clon #136 Prusacervi.<br />
* '''Nacimiento:''' 13 de Abril de 2013<br />
* '''Electrónica''': [[Ramps 1.4]]<br />
* '''Hot-End''': Budas Gagget3D<br />
* '''Firmware''': Marlin<br />
<br />
|<center> [[File:Cacer.jpg|200px]]</center><br />
|--------<br />
| <center>[[File:WALLE.JPG|150px]]</center><br />
|<br />
* '''Clon #193:''' <font color="#0000FF"> '''WALL-E (Nº7)'''</font>.<br />
* '''Familia''': Prusa it3 Single Plate<br />
* '''Generación''': 3<br />
* '''Autor''': [http://www.mbrobotics.es/MbRobotics/Main.html MABLACK (Miguel Angel Berna Alberola)]<br />
* '''Impresora Progenitora''': [http://www.mbrobotics.es/Wiki/index.php?title=JOHNNY5 JOHNNY5] <br />
* '''Electrónica''': [http://reprap.org/wiki/Sanguinololu Sanguinololu]<br />
* '''Firmware''': [https://github.com/kliment/Sprinter Sprinter]<br />
* '''Extrusor''': [http://reprap.org/wiki/Wade%27s_Geared_Extruder Wade's extruder] (plástico de 3mm)<br />
* '''Hot-End''': [http://reprap.org/wiki/J_Head_Nozzle J-Head Mk V-B Spania]<br />
* '''Nacimiento:''' 06 de Abril de 2013<br />
| <center>[[File:Walle.jpg|200px]]</center><br />
|--------<br />
<br />
| <center>[[File:Printy.jpg|150px]]</center><br />
|<br />
* '''Clon #194:''' <font color="#0000FF"> '''Printy'''</font>.<br />
* '''Modelo''': Prusa Mendel (it 2)<br />
* '''Autor''': Ruben Ferrero<br />
* '''Lugar''': Leon<br />
* '''Impresora Progenitora''': Clon #155: CAZURRA <br />
* '''Electrónica''': [http://reprap.org/wiki/Sanguinololu Sanguinololu]<br />
* '''Firmware''': Sprinter super-estable<br />
* '''Hot-End''': J-Head Mk IV<br />
* '''Nacimiento:''' 17 de Abril de 2013<br />
| <center>[[File:RFerrero.jpg|200px]]</center><br />
|--------<br />
<br />
| <center></center><br />
|<br />
* '''Clon #195:''' <font color="#0000FF"> '''Paco Prime'''</font>.<br />
* '''Modelo''': Prusa Mendel (it 2)<br />
* '''Autor''': David Leal<br />
* '''Lugar''': Málaga / San Sebastián<br />
* '''Impresora Progenitora''': Air2 Desconocida.-<br />
* '''Electrónica''': Ramps 1.4/Mega<br />
* '''Firmware''': Marlin/Sprinter<br />
* '''Hot-End''': Hispania<br />
* '''Nacimiento:''' 20 de Abril de 2013<br />
| <center></center><br />
|--------<br />
<br />
| <center>[[File:dalek sec foto.jpg|250px]]</center><br />
|<br />
* '''Clon #196:''' <font color="#0000FF"> '''Dalek_Sec'''</font>.<br />
* '''Modelo''': Prusa Mendel Iteración 2<br />
* '''Autor''': Manu Barranco<br />
* '''Lugar''': Madrid<br />
* '''Impresora Progenitora''': JJMachine<br />
* '''Electrónica''': Ramps 1.4/Mega<br />
* '''Firmware''': Sprinter.<br />
* '''Hot-End''': J-Head Mk V-BV 0.5mm<br />
* '''Nacimiento:''' 22 de Abril de 2013<br />
| <center>[[File:dalek sec.jpg|200px]]</center><br />
|--------<br />
| <center></center><br />
|<br />
* '''Clon #197:''' <font color="#0000FF"> '''Eprintnefrina'''</font>.<br />
* '''Modelo''': Prusa Mendel v1<br />
* '''Autor''': Maria Lopez y Angel Ruiz<br />
* '''Lugar''': Melilla<br />
* '''Impresora Progenitora''': Desconocido<br />
* '''Electrónica''': Ramps 1.3/Mega<br />
* '''Firmware''': Sprinter.<br />
* '''Hot-End''': Buda Gallego<br />
* '''Nacimiento:''' 18 de Abril de 2013<br />
| <center>[[File:epinefrina.jpg|200px]]</center><br />
|--------<br />
| <center>[[File:Spica01.jpg|150px]]</center> <br />
|<br />
* '''Clon #199:''' <font color="#0000FF"> '''Spica'''</font>.<br />
* '''Modelo''': Prusa i3<br />
* '''Autor''': Adrián Alonso [[User: Aalonso]] - Luis Macías [[User: LmaciasCW]]<br />
* '''Lugar''': Madrid<br />
* '''Impresora Progenitora''': Moebius. [http://www.reprap.org/wiki/Clone_wars_Impresora_Moebius]<br />
* '''Electrónica''': Ramps 1.4/Mega<br />
* '''Firmware''': Sprinter superstable.<br />
* '''Hot-End''': Budas Gallego 0.4mm<br />
* '''Nacimiento:''' 19/03/2013.<br />
* [[Clone wars Impresora Spica|Mas información]]<br />
| <center>[[File:Spica.jpg|150px]]</center> <br />
|--------<br />
| <center></center><br />
|<br />
* '''Clon #200''': '''<font color="#0000FF">CopyPrintBot</font>'''<br />
* '''Modelo''': Prusa i2<br />
* '''Autor''': Grunin Nano [[User: Grunin]]<br />
* '''Lugar''': Barcelona<br />
* '''Impresora progenitora''': [[Clone_wars:Impresora_Michaelmas]]<br />
* '''Nacimiento''': 02/05/2013<br />
* '''Electrónica''': Ramps 1.4 <br />
* '''Firmware''': Sprinter<br />
* '''Hot-End''': J-Head 0.4mm<br />
| <center></center><br />
|-------------<br />
| <center>[[File:printfles_3.jpg|150px]]</center> <br />
|<br />
* '''Clon #201''': '''<font color="#0000FF">PrintFles</font>'''<br />
* '''Modelo''': Prusa i2<br />
* '''Autor''': Pablo Bosch[[User: Pifles]]<br />
* '''Lugar''': Madrid (Collado Villalba)<br />
* '''Impresora progenitora''': [[Desconocida]]<br />
* '''Nacimiento''': 28/04/2013<br />
* '''Electrónica''': Ramps 1.4 <br />
* '''Firmware''': Marlin<br />
* '''Hot-End''': Buda Chino 0.5mm<br />
| <center>[[File:printfles_4.jpg|150px]]</center> <br />
| <center></center><br />
|-------------<br />
|<center>[[File:Prusaneurobot.png|200px]]</center> <br />
|<br />
* '''Clon #203''': '''<font color="#0000FF">NeuroBot</font>'''<br />
* Lugar: Granada<br />
* Tipo: Prusa i2<br />
* Impresora progenitora: Avatar (jrdetoro)<br />
* Autor : JtorralbaCW (Jose M Torralba)<br />
* Nacimiento''': 4/05/2013<br />
* Electrónica''': Ramps 1.4 (Taurino)<br />
* Firmware''': Sprinter<br />
* Hot-End''': Budas Gallego<br />
* [http://reprap.org/wiki/Clone_Wars:_Impresora_NeuroBot MAS INFORMACIÓN]<br />
<br />
|<center>[[File:Granadaimprusa.jpg|200px]]</center> <br />
<br />
|------------- <br />
|<center>[[blu3.png|200px]]</center><br />
|<br />
* '''Clon #204''': '''<font color="#0000FF">BLU3</font>'''<br />
* '''Modelo''': Prusa IT2<br />
* '''Autor''': Grupo M2 Asociación de Robótica Educativa Complubot<br />
* '''Lugar''': Alcalá de Henares - Madrid<br />
* '''Impresora progenitora''': [[Carbonite]]<br />
* '''Nacimiento''': 04/05/2013<br />
* '''Electrónica''': Ramps 1.4 <br />
* '''Firmware''': Marlin<br />
* '''Hot-End''': J-Head MkVB<br />
|<center> [[File:Avatar_complubot.png|150px|link=http://www.complubot.org]]</center><br />
<br />
<br />
|------------- <br />
|<center>[[Sin título 1.jpg|200px]]</center><br />
|<br />
* '''Clon #205''': '''<font color="#0000FF">Sin título 1</font>'''<br />
* '''Modelo''': Prusa i3<br />
* '''Autor''': OskarLGS<br />
* '''Lugar''': Cantabria<br />
* '''Impresora progenitora''': Desconocida<br />
* '''Nacimiento''': 5/05/2013<br />
* '''Electrónica''': Sanguinololu 1.3a<br />
* '''Firmware''': Sprinter<br />
* '''Hot-End''': FaryNozzle 2.0<br />
|<center></center><br />
<br />
|------------- <br />
|<center>[[File:Prusa 2 GADES 1imp.jpg|150px]]</center><br />
|<br />
* '''Clon #206''' '''<font color="#0000FF">GADES</font>'''<br />
* Lugar: Cádiz <br />
* Tipo: Prusa Interación 2<br />
* Autor: Rafa Pinilla<br />
* Impresora progenitora: [[Clone wars:Impresora X Wing|X-Wing]]<br />
* '''Nacimiento''': 5/05/2013<br />
* '''Electrónica''': Ramps 1.4<br />
* '''Firmware''': Sprinter Superestable<br />
* '''Hot-End''': J-Head MkVB <br />
|<center></center><br />
|---------<br />
| <center></center> <br />
|<br />
* '''Clon #207''': <font color="#0000FF">Prusimus Prime</font><br />
* '''Lugar''': Mollet del Vallès (Barcelona)<br />
* '''Familia''': Prusa i3 Box Frame<br />
* '''Autores''': Ariadna Trueba y Juan Pedro López<br />
* '''Impresora progenitora''': Alguna de las de Javier Briz :)<br />
* '''Nacimiento''': 08-May-2013<br />
* '''Descendencia''': -<br />
* [[Clone Wars:Impresora Prusimus prime|MÁS INFORMACIÓN]]<br />
| | <center></center> <br />
|---------<br />
| <center></center><br />
|<br />
* '''Clon #208''': <font color="#0000FF">ROBOTIJO</font><br />
* '''Lugar''': ALICANTE<br />
* '''Modelo''': Prusa Interacion 2<br />
* '''Autor''': Paco Martinez<br />
* '''Impresora progenitora''': [[Clone UA]]<br />
* '''Nacimiento''': 09/4/2013<br />
* '''Electrónica''': Ramps 1.4<br />
* '''Firmware''': Marlin<br />
* '''Hot-End''': J- HEAD HISPANIA<br />
<br />
|------------- <br />
|<center>[[File:DAISY.jpg|150px]]</center><br />
|<br />
* '''Clon #209''' '''<font color="#0000FF">DAISY</font>'''<br />
* '"Lugar'": Alcalá de Henares (Madrid)<br />
* '"Tipo'": Prusa Interación 2<br />
* '"Autor'": Sergio García<br />
* '"Impresora progenitora'": [[R5D5]]<br />
* '''Nacimiento''': 12/5/2013<br />
* '''Electrónica''': Ramps 1.4<br />
* '''Firmware''': Sprinter Superestable<br />
* '''Hot-End''': J-Head Hispania<br />
|<center>[[File:DAISY2.jpg|270px]]</center><br />
|---------<br />
<br />
|------------- <br />
|<center>[[File:Prusa_i3_mini.jpg|250px]]</center><br />
|<br />
* '''Clon #210''': '''<font color="#0000FF">Delorean</font>'''<br />
* '''Modelo''': Prusa i3 box modificada<br />
* '''Autor''': Jose Julio<br />
* '''Lugar''': Tenerife<br />
* '''Impresora progenitora''': Esther píscole<br />
* '''Generación''': 4<br />
* '''Nacimiento''': 12/05/2013<br />
* '''Electrónica''': RAMPS 1.4<br />
* '''Firmware''': Marlin<br />
* '''Hot-End''': FaryNozzle 2.0<br />
|<center>[[File:Jj_perfil.jpg|100px]]</center><br />
|-------------<br />
| <center>[[File:PrintrBot_cableada.jpg|150px]]</center> <br />
|<br />
* '''Clon #211''': '''<font color="#0000FF">Chubaca</font>'''<br />
* '''Modelo''': PrintrBot<br />
* '''Autor''': Enrique Rodríguez<br />
* '''Lugar''': Madrid<br />
* '''Impresora progenitora''': Paclemaker<br />
* '''Nacimiento''': 16/05/2013<br />
* '''Electrónica''': Sanguinololu 1.3a<br />
* '''Firmware''': Marlin<br />
* '''Hot-End''': Polaco<br />
|<center> [[File:3Dchewie.jpg|150px]]</center><br />
|-------------<br />
| <center>[[File:Obras.jpg|150px]]</center> <br />
|<br />
* '''Clon #212''': '''<font color="#0000FF">Destriers</font>'''<br />
* '''Modelo''': Prusa I2<br />
* '''Autor''': Jose Raul Montero<br />
* '''Lugar''': Málaga<br />
* '''Impresora progenitora''': [[Clone wars: Telchar|Telchar]]<br />
* '''Nacimiento''': 18/05/2013<br />
* '''Electrónica''': RAMPS 1.4<br />
* '''Firmware''': Sprinter Superestable<br />
* '''Hot-End''': Chino<br />
|<center> [[File:Obras.jpg|150px]]</center><br />
<br />
|--------<br />
| <center>[[File:Corbusi.jpg|250px]]</center> <br />
|<br />
* '''Clon #213''': '''<font color="#0000FF">Le Corbu</font>'''<br />
* '''Modelo''': Prusa I2<br />
* '''Autor''': Alberto Martinez <br />
* '''Lugar''': Zaragoza<br />
* '''Impresora progenitora''': [[Clone wars:Impresora Geek-X-truder|Geek-X-Truder]]<br />
* '''Nacimiento''': 25/05/2013<br />
* '''Electrónica''': RAMPS 1.4<br />
* '''Firmware''': Sprinter Superestable<br />
* '''Hot-End''': FaryNozzle 2.0<br />
<br />
|<center> [[File:Corbusier.jpg|150px]]</center><br />
|<br />
|-------------<br />
|<center>[[File:RoyBatty.JPG|250px]]</center><br />
|<br />
* '''Clon #214''': '''<font color="#0000FF">Roy Batty</font>'''<br />
* '''Modelo''': Prusa I2<br />
* '''Autor''': Juan Moreno<br />
* '''Lugar''': Vitoria<br />
* '''Impresora progenitora''': [[Clone wars:Impresora R5D5|R5D5]]<br />
* '''Nacimiento''': 08/05/2013<br />
* '''Electrónica''': RAMPS 1.4<br />
* '''Firmware''': Sprinter Superestable<br />
* '''Hot-End''': SPBudas<br />
<br />
|<center> [[File:RoyBatty2.JPG|150px]]</center><br />
|<br />
|-------------<br />
|<center>[[File:Bolisa.JPG|250px]]</center><br />
|<br />
* '''Clon #215''': '''<font color="#0000FF">Bolisa</font>'''<br />
* '''Modelo''': Prusa I2<br />
* '''Autor''': Cipri Ballester<br />
* '''Lugar''': Zaragoza<br />
* '''Impresora progenitora''': [[Clone wars:Impresora Giskard|Giskard]]<br />
* '''Nacimiento''': 29/04/2013<br />
* '''Electrónica''': Arduino MEGA / RAMPS 1.4<br />
* '''Firmware''': Sprinter Superestable<br />
* '''Extrusor''': Jonaskuehling extruder<br />
* '''Hot-End''': FaryBudas<br />
<br />
| <center> [[File:galaxian.jpg|250px]]</center><br />
|<br />
|-------------<br />
| <center>[[File:OrionNoB.jpg|250px]]</center><br />
|<br />
* '''Clon #216''': '''<font color="#0000FF">Orion</font>'''<br />
* '''Modelo''': Prusa Air 2<br />
* '''Autor''': Daniel Lopez<br />
* '''Lugar''': Madrid<br />
* '''Impresora Progenitora''': [[Impresora Progenitora: Demiurgo|Demiurgo]] y [[Clone wars: Impresora Gandalf the transparent|Gandalf the transparent]]<br />
* '''Nacimiento''': '''30/Septiembre/2012'''<br />
* '''Electrónica''': sanguinololu<br />
* '''Firmware''': Sprinter <br />
* '''Extrusor''': Jonaskuehling extruder<br />
* '''Hot-End''': J-head<br />
<br />
<br />
| <center> [[File:NebOrion.jpg|250px]]</center><br />
|<br />
|---------<br />
| <center>[[File:Clon-217-SpongeBot_Reloaded_.png|200px]]</center> <br />
|<br />
* '''Clon #218''': <font color="#0000FF">SpongeBot Reloaded</font><br />
* '''Lugar''': A coruña<br />
* '''Familia''': Prusa i3<br />
* '''Generación''': 6<br />
* '''Autor''': Alejandro Taracido (TCRobotics)<br />
* '''Impresora progenitora''': Clon #187: Super 8<br />
* '''Nacimiento''': 01/Jun/2013<br />
* '''Descendencia''': Próximamente!<br />
| <center>[[File:Spongebot-logo.png| 150px]]</center> <br />
|---------<br />
<br />
|---------<br />
| <center>[[File:Prusai2sprint.jpg|250px]]</center> <br />
|<br />
* '''Clon #219''': <font color="#0000FF">Sprintfield</font><br />
* '''Lugar''': Sevilla<br />
* '''Familia''': Prusa i2<br />
* '''Generación''': 4º<br />
* '''Autor''': Alvaro Luna (AlunaCW)<br />
* '''Impresora progenitora''': Clon #30: X-Wing y Clon #55: Y-Wing<br />
* '''Nacimiento''': 31/Mayo/2013<br />
* '''Descendencia''': Próximamente!<br />
* '''Electrónica''': ARDUINO MEGA / RAMPS 1.4<br />
* '''Firmware''': Marlin <br />
* '''Extrusor''': Jonaskuehling extruder<br />
* '''Hot-End''': J-head V<br />
| <center>[[File:Sprintfield.jpg| 150px]]</center> <br />
|---------<br />
| <center>[[File:modificado.jpg| 250px]]</center> <br />
|<br />
* '''Clon #220''': <font color="#0000FF">Geth</font><br />
* '''Lugar''': Sabadell<br />
* '''Familia''': Prusa i3<br />
* '''Generación''': 4<br />
* '''Autor''': José María Garrocho (Jmgarrocho)<br />
* '''Impresora progenitora''': Clon #135: hydra<br />
* '''Nacimiento''': 09/Junio/2013<br />
* '''Descendencia''': Próximamente!<br />
* '''Electrónica''': ARDUINO MEGA / RAMPS 1.4<br />
* '''Firmware''': Marlin <br />
* '''Extrusor''': Jonaskuehling extruder<br />
* '''Hot-End''': E3D-v4.1<br />
| <center>[[File:|291930101503003238316458581109164480429571176420903n.jpg 150px]]</center> <br />
|---------<br />
| <center>[[File:IG-88.jpg|150px]]</center> <br />
|<br />
* Nombre: '''#221 IG-88'''<br />
* Lugar: Oleiros<br />
* Tipo: Prusa i2<br />
* Generación: 5ª<br />
* Autor: Xarpe Serpe<br />
* Impresora progenitora: SpongeBot [Alejandro Taracido (TCRobotics)]<br />
* '''<font color="#0000FF">Estado:</font>'''<br />
**Aprendiendo los trucos de la impresión.<br />
**Pensando sistema de ajuste a mesa no horizontal.<br />
**Iniciando impresión de piezas I3 para donación.<br />
| <center> [[File:IG-88.jpg|150px]]</center><br />
|-------------<br />
| <center>[[File:Clon_nono.jpg|150px]]</center> <br />
|<br />
* '''Clon #222''': <font color="#0000FF">Nono</font><br />
* '''Lugar''': Alicante<br />
* '''Modelo''': Prusa i3 <br />
* '''Generación''': 4ª<br />
* '''Autor''': Paco Gallud<br />
* '''Impresora progenitora''': ROBOTIJO<br />
* '''Nacimiento''': 10/6/2013<br />
* '''Electrónica''': Ramps 1.4<br />
* '''Firmware''': Marlin<br />
* '''Hot-End''': E3D<br />
| <center>[[File:nono.jpg|150px]]</center> <br />
|---------<br />
| <center>[[File:TelarBot1.jpg|220px]]</center> <br />
|<br />
* '''Clon #223''': <font color="#0000FF">TelarBot</font><br />
* '''Lugar''': Zamora-Soria<br />
* '''Modelo''': Prusa i2 <br />
* '''Generación''': 4ª<br />
* '''Autor''': Julian Garcia<br />
* '''Impresora progenitora''': Esterpiscole<br />
* '''Nacimiento''': 07/6/2013<br />
* '''Electrónica''': Ramps 1.4<br />
* '''Firmware''': Sprinter<br />
* '''Hot-End''': PrusaNozzle<br />
| <center>[[File:Telarbotplaca.jpg|280px]]</center> <br />
|---------<br />
| <center>[[File:Gutemberg.jpg|220px]]</center> <br />
|<br />
* '''Clon #224''': <font color="#0000FF">Gutenberg</font><br />
* '''Lugar''': Zaragoza (Arduteka)<br />
* '''Modelo''': Prusa IT3 <br />
* '''Generación''': 5ª<br />
* '''Autores''': Javier Montesa, José Luis Poza y Ricardo Pérez<br />
* '''Impresora progenitora''': Gandalf y Geek-x-truder.<br />
* '''Nacimiento''': 18/5/2013<br />
* '''Electrónica''': Sanguinololu 1.3a<br />
* '''Firmware''': Marlin-Marlin v.1<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': BudaschNozzle 2.0<br />
| <center>[[File:Gutenberg.png|280px]]</center> <br />
|---------<br />
| <center>[[File:Imprusora_Filosofal.jpg|220px]]</center> <br />
|<br />
* '''Clon #225''': <font color="#0000FF">Imprusora Filosofal</font><br />
* '''Lugar''': Real Cortijo de San Isidro<br />
* '''Modelo''': Prusa IT3 <br />
* '''Autores''': Sergio MC (Gracias a Nines)<br />
* '''Impresora progenitora''': Giskard.<br />
* '''Nacimiento''': 18/6/2013<br />
* '''Electrónica''': Ramps 1.4<br />
* '''Firmware''': Marlin-Marlin v.1<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': PrusaNozzle 0.1<br />
| <center>[[File:Logo_Filosofal.png]]</center> <br />
|---------<br />
| <center>[[File:Bender_1.0.JPG|200px]]</center><br />
|<br />
* '''Clon #227''': <font color="#0000FF">Bender 1.0</font><br />
* '''Lugar''': Huelva<br />
* '''Modelo''': [http://reprap.org/wiki/Prusa_Mendel Prusa Mendel] (iteración 2)<br />
* '''Generación''': 5ª<br />
* '''Autor''': Iván Ramírez Beltrán<br />
* '''Impresora progenitora''': Giskard (Generación 4ª)<br />
** '''Nacimiento''': 29/06/2013<br />
** '''Electrónica''': Arduino Mega + Ramps 1.4<br />
** '''Firmware''': Sprinter<br />
** '''Extrusor''': Jonaskuehling<br />
** '''Hot-End''': Buda-style v1.2<br />
| <center>[[File:Bender_aplausos.jpg|250px]]</center><br />
|---------<br />
| <center>[[File:DELOREAN-QueNoWert-225x300.jpeg ]]</center><br />
|<br />
* '''Clon #229''' : <font color="#0000FF"> deLOReAn </font><br />
* '''Lugar''' : Lora del Rio. Sevilla. <br />
* '''Modelo''' : Prusa Air 2 ( Kit LEAPto3D)<br />
* '''Generación''': 5ª (Duda)<br />
* '''Autor''' : Enrique González Lafuente (QueNoWert)<br />
* '''Impresora progenitora''': Desconocida<br />
** '''Nacimiento''' : 17/06/2013<br />
** '''Electrónica''': Sanguinololu 1.3b y Pololus<br />
** '''Firmware''' : Sprinter y Marlin (GNU/Linux Linux Mint)<br />
** '''Software''' : Printun - Cura -host+ Skeinforge (GNU/Linux Linux Mint)<br />
** '''Extrusor''' : Jonaskuehling Jonaskuehling 3mm<br />
** '''Hot-End''' : J-Head MKV 3mm, boquilla: 0,5mm<br />
| <center>[[File:000000.jpg]]</center><br />
|---------<br />
| <center>[[File:00000.jpg ]]</center><br />
|<br />
* '''Clon #230''' : <font color="#0000FF"> Malospelos </font><br />
* '''Lugar''' : San Sebastian de los Reyes. Madrid. <br />
* '''Modelo''' : Prusa IT 2 <br />
* '''Generación''': 3ª o 4ª (piezas compradas en reclone3d por tanto hija de xwing o Ywing)<br />
* '''Autor''' : Felix Arias<br />
* '''Impresora progenitora''': Reclone3d Farm<br />
** '''Nacimiento''' : 2/07/2013<br />
** '''Electrónica''': Arduino Mega + Ramps 1.4<br />
** '''Firmware''' : Sprinter<br />
** '''Extrusor''' : Jonaskuehling 3mm<br />
** '''Hot-End''' : J-Head Hispania 3mm, boquilla: 0,5mm<br />
| <center>[[File:malospelos.jpg]]</center><br />
|---------<br />
| <center>[[File:Cl4p-tp.jpg ]]</center><br />
|<br />
* '''Clon #231''' : <font color="#0000FF"> CL4P-TP </font><br />
* '''Lugar''' : Barcelona ciudad <br />
* '''Modelo''' : Prusa IT 2 <br />
* '''Generación''': 3ª<br />
* '''Autor''' : Martí Serra (XvapX)<br />
* '''Impresora progenitora''': Desconocido<br />
** '''Nacimiento''' : 15/06/2013<br />
** '''Electrónica''': Arduino Mega + Ramps 1.4<br />
** '''Firmware''' : Marlin<br />
** '''Extrusor''' : Jonaskuehling 3mm<br />
** '''Hot-End''' : Budaschnozzle 1.2 3mm, boquilla: 0,5mm<br />
| <center>[[File:claptrap.jpg]]</center><br />
|---------<br />
|<center>[[File:forrata2.jpg ]]</center><br />
|<br />
* '''Clon #232''' : <font color="#0000FF"> FORRATA </font><br />
* '''Lugar''' : Madrid<br />
* '''Modelo''' : Prusa IT 2 <br />
* '''Generación''': 3ª<br />
* '''Autor''' : David Alonso (DAlonsoCW)<br />
* '''Impresora progenitora''': Mardan<br />
** '''Nacimiento''' : 06/07/2013<br />
** '''Electrónica''': Arduino Mega + Ramps 1.4<br />
** '''Firmware''' : Sprinter superstable<br />
** '''Extrusor''' : Jonaskuehling 3mm<br />
** '''Hot-End''' : Budas chino 3mm, boquilla: 0,4mm<br />
|<center>[[File:Tesla3.jpg ]]</center><br />
|---------<br />
|<center>[[File:prisma.jpg|150px]]</center><br />
|<br />
* '''Clon #233''' : <font color="#0000FF"> Prisma IT3 </font><br />
* '''Lugar''' : Malaga<br />
* '''Modelo''' : Prusa IT 3 <br />
* '''Generación''': 4ª<br />
* '''Autor''' : prisma_cw<br />
* '''Impresora progenitora''': Telchar<br />
* '''Nacimiento''' : 15/07/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Sprinter superstable<br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : JHead Hispania 0.5<br />
|<center>[[File:avatar_prisma.jpg|250px]]</center><br />
|---------<br />
|<center>[[File:EWOK IT2.JPG|150px]]</center><br />
|<br />
* '''Clon #234''' : <font color="#0000FF"> EWOK </font><br />
* '''Lugar''' : Girona<br />
* '''Modelo''' : Prusa IT 2 <br />
* '''Autor''' : Sushimarc<br />
* '''Impresora progenitora''': Manuel Sanchez Amores<br />
* '''Nacimiento''' : 06/07/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Sprinter superstable<br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : JHead MK4 MKIV <br />
|<center>[[File:Ewok.jpg|250px]]</center><br />
|---------<br />
|<center>[[File:Solo_001_Thumb.jpg|250px]]</center><br />
|<br />
* '''Clon #235''' : <font color="#0000FF"> Solo </font><br />
* '''Lugar''' : Girona<br />
* '''Modelo''' : Prusa i2 <br />
* '''Autor''' : Josep Ponce [JponceCW] [tra7montana]<br />
* '''Impresora progenittora''': placeMAKER<br />
* '''Nacimiento''' : 16/07/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Sprinter superstable<br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : Budaschnozzle 1.2 3mm, boquilla: 0,5mm <br />
*[http://www.reprap.org/wiki/Clone_wars:Impresora_J%26JSolo MÁS INFORMACIÓN]<br />
|<center>[[File:Solo_Construccio_AAA_CubCalibracio.jpg|250px]]</center><br />
|---------<br />
|<center>[[File:TATU.jpg|250px]]</center><br />
|<br />
* '''Clon #236''' : <font color="#0000FF"> TATU</font><br />
* '''Lugar''' : Girona<br />
* '''Modelo''' : Prusa IT 3 <br />
* '''Autor''' : Tatuin<br />
* '''Impresora progenitora''': Desconocido<br />
* '''Nacimiento''' : 25/06/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Sprinter superstable<br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : JHead MK4 MKIV <br />
|<center>[[File:TATU.jpg|250px]]</center><br />
|---------<br />
|<center>[[A falta de foto]]</center><br />
|<br />
* '''Clon #237''' : <font color="#0000FF"> TATU</font><br />
* '''Lugar''' : Baena (Córdoba)<br />
* '''Modelo''' : Prusa IT 3 <br />
* '''Autor''' : Iniciativas 3d<br />
* '''Impresora progenitora''': Desconocido<br />
* '''Nacimiento''' : 19/07/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : G3D Budas style <br />
|<center>[[File:I3dgrande.png]]</center><br />
|---------<br />
|<center>[[A falta de foto]]</center><br />
|<br />
* '''Clon #238''' : <font color="#0000FF"> FrankenPrusa</font><br />
* '''Lugar''' : Burgos<br />
* '''Familia''' : Mendel Prusa Iteración 2<br />
* '''Generación''' : 6<br />
* '''Autor''' : Juan García Rodríguez / David Mayor Fernandez<br />
* '''Impresora progenitora''': VENTURPRINT<br />
* '''Nacimiento''' : 01/06/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling V5/V6 3mm<br />
* '''Hot-End''' : Polaco 0.5mm <br />
|<center>[[A falta de foto]]</center><br />
|---------<br />
|<center>[[File:prusanoa.jpg|250px]]</center><br />
|<br />
* '''Clon #239''' : <font color="#0000FF"> NOA Prusa</font><br />
* '''Lugar''' : Zamora<br />
* '''Familia''' : Mendel Prusa Iteración 2<br />
* '''Generación''' : 5<br />
* '''Autor''' : Adolfo Castaño<br />
* '''Impresora progenitora''': Lucas Clon<br />
* '''Nacimiento''' : 29/06/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Sprinter <br />
* '''Extrusor''' : Jonaskuehling V5/V6 3mm<br />
* '''Hot-End''' : J-Head MKV 3mm, boquilla: 0,5mm<br />
|<center>[[File:clonelucasyyo.jpg|250px]]</center><br />
|---------<br />
|<center>[[File:ImprusinhoConPeza.jpg|250px]]</center><br />
|<br />
* '''Clon #240''' : <font color="#0000FF">Imprusiño</font><br />
* '''Lugar''' : CPI de Atios - Valdoviño (A Coruña)<br />
* '''Familia''' : Prusa Iteración 2<br />
* '''Generación''' : 2<br />
* '''Autor''' : Equipo Imprusiño: Iván, Kevin, Pablo, María, Rita, Cris e Lydia<br />
* '''Impresora progenitora''': PacleMaker<br />
* '''Nacimiento''' : 03/05/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Sprinter <br />
* '''Extrusor''' : Jonaskuehling V5/V6 3mm<br />
* '''Hot-End''' : PrusaNozzle 0.4<br />
|<center>[[File:EquipoImprusinho.jpg|300px]]</center><br />
|---------<br />
|<center>[[File:DSC_0417.jpg|300px]]</center><br />
|<br />
* '''Clon #241''' : <font color="#0000FF">Tantive IV</font><br />
* '''Lugar''' : Astigarraga, Gipuzkoa'''<br />
* '''Familia''' : Prusa Iteración 2'''<br />
* '''Autor''' : Victor Barahona - Sir Galaxy[[User:VbarahonaCW]]<br />
* '''Impresora progenitora''': JAR JAR 140<br />
* '''Nacimiento''' : 20/7/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling V5/V6 3mm<br />
* '''Hot-End''' : J-Head MKV 3mm, boquilla: 0,5mm<br />
|<center>[[File:Tantive4.jpg|300px]]</center> <br />
|---------<br />
|<center>[[File:2013-07-27-1660.jpg|300px]]</center><br />
|<br />
* '''Clon #242''' : <font color="#0000FF">PrusaMod</font><br />
* '''Lugar''' : Santa Cruz de Bezana, Cantabria'''<br />
* '''Familia''' : Prusa Iteración 2'''<br />
* '''Autor''': Vicente Centeno [[User:Chentinox | (ChentinoX)]]<br />
* '''Impresora progenitora''': Toxina<br />
* '''Nacimiento''' : 30/6/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Marlin<br />
* '''Extrusor''' : Jonaskuehling V5<br />
* '''Hot-End''' : J-Head MKV 3mm, boquilla: 0,5mm<br />
|<center>[[File:2013-07-27-1654.jpg|300px]]</center> <br />
|---------<br />
|<center>[[File:General grevious prusa II.jpg|300px]]</center><br />
|<br />
* '''Clon #243''' : <font color="#0000FF"> General Grevious Prusa II</font><br />
* '''Lugar''' : Granada'''<br />
* '''Familia''' : Prusa Iteración II'''<br />
* '''Autor''': Juan Carlos Joya Clares <br />
* '''Nacimiento''' : Nacimiento Oficial 3 de Julio de 2013 Conferencia de Granada Imprusa<br />
* '''Electrónica''': Sanguinololu 1.3b + Pololus<br />
* '''Firmware''' : Sprinter <br />
* '''Hot-End''' : J-Head Hispania, boquilla: 0,5mm<br />
* '''Impresora progenitora''': GrBot3D http://www.reprap.org/wiki/Clone_Wars:_Impresora_GrBot3D<br />
* '''[[Clone Wars: General_Grevious|MÁS INFORMACIÓN]]<br />
|<center>[[File:General.jpg|300px]]</center> <br />
|---------<br />
|<center>[[File:TalaPrusa.png|300px]]</center><br />
|<br />
* '''Clon #244''' : <font color="#0000FF"> TalaPrusa</font><br />
* '''Lugar''' : Talavera de la Reina (Toledo)<br />
* '''Familia''' : Mendel Prusa Iteración 3<br />
* '''Autor''' : Antonio Navarro<br />
* '''Nacimiento''' : 11/08/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : Budaschnozzle 2.0 3mm, boquilla: 0,35mm <br />
|<center>[[A falta de foto]]</center><br />
|---------<br />
|<center>[[File:K-9-YA.JPG|300px]]</center><br />
|<br />
* '''Clon #245''' : <font color="#0000FF"> K-9-YA</font> https://groups.google.com/forum/?fromgroups=#!topic/asrob-uc3m-impresoras-3d/Ti6OHaZ1szc<br />
* '''Lugar''' : Burgos<br />
* '''Familia''' : Mendel Prusa Iteración 3<br />
* '''Autor''' : Manuel Lucio<br />
* '''Nacimiento''' : 22/08/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : Prusa Nozzle 4mm<br />
* '''Impresora progenitora''': Ironhide 3.0 http://www.reprap.org/wiki/File:IronHide30.jpg<br />
|<center>[[File:K-9-YA-Logo.jpg|300px]]</center><br />
|---------<br />
|<center>[[File:Paxpan3dimp.jpg|260px]]</center><br />
|<br />
* '''Clon #247''' : <font color="#0000FF"> Paxpan 3D</font><br />
* '''Lugar''' : Artziniega (Alava)<br />
* '''Familia''' : Mendel Prusa Iteración 3<br />
* '''Autor''' : Guillermo Velasco (GvelascoCW)<br />
* '''Nacimiento''' : 25 de Agosto de 2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4 <br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling<br />
* '''Hot-End''' : Buda style v1.2, boquilla: 0,5mm <br />
<br />
|<center>[[File:Mattpaxprn000.jpg|200px]]</center> <br />
|---------<br />
|<center>[[File:Obras.jpg|250px]]</center><br />
|<br />
* '''Clon #248''': <font color="#0000FF">B.E.N</font><br />
* '''Lugar''': Madrid <br />
* '''Modelo''': Prusa iteration 2<br />
* '''Autor''': Rafael <br />
* '''Impresora progenitora''': Mardan e Hija<br />
** '''Nacimiento''': 20/08/2013<br />
** '''Electrónica''': Ramps 1.3<br />
** '''Firmware''': Sprinter <br />
|<center>[[File:B.E.N.jpg|250px]]</center><br />
|---------<br />
|<center>[[File:Winebot2.png|250px]]</center><br />
|<br />
* '''Clon #249''' : <font color="#0000FF"> Winebot</font><br />
* '''Lugar''' : Jumilla (Murcia)<br />
* '''Modelo''' : Prusa IT 3 <br />
* '''Autor''' : Pedro Perez<br />
* '''Impresora progenitora''': Desconocido<br />
* '''Nacimiento''' : 16/08/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Marlin <br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : J-Head 0.4mm<br />
|<center>[[File:Scrat-beer.jpg|250px]]</center><br />
|---------<br />
| <center>[[File:MagicMirrorPrusa.jpg|250px]]</center><br />
|<br />
* '''Clon #250''' : <font color="#00334FF"> Magic Mirror Prusa</font><br />
* '''Lugar''' : Vilagarcía de Arousa (Pontevedra)<br />
* '''Modelo''' : Prusa IT 2<br />
* '''Autor''' : JpinedoCW (José Pinedo)<br />
* '''Impresora progenitora''': '''<font color="#FF6633">Piezas compradas a Jesmar</font>'''<br />
* '''Nacimiento''' : 26/08/2013<br />
* '''Electrónica''': Arduino Mega + Ramps 1.4<br />
* '''Firmware''' : Repetier-Host<br />
* '''Extrusor''' : Jonaskuehling 3mm<br />
* '''Hot-End''' : Buddaschnozzle 2.0 (punta 0.5mm)<br />
* '''Inicio Proyecto''' : 15/07/2013<br />
* '''<font color="#0000FF">Estado:</font>'''<br />
*Imprimiendo su primer clon (una iteración 3 que aún no está registrada en la wiki).<br />
* '''E-mail''': [elmaspinedo@gmail.com]<br />
|<center> [[File:MAGIC-MIRROR-PRUSA.gif|250px]]</center><br />
|------------<br />
| <center>[[File:The_Red_Baron.jpg|250px]]</center> <br />
|<br />
* Clon #251: '''Red Baron'''<br />
* Inicio proyecto: '''10/04/2013'''<br />
* Lugar: '''Madrid'''<br />
* Tipo: '''Prusa i3'''<br />
* Impresora Progenitora: '''Black Knight'''<br />
* '''Nacimiento''' : 01/09/2013<br />
* Autor : '''El equipo Almodóvar''' <br />
| <center>[[File:RedBaron_Avatar.png|200px]]</center> <br />
|------------<br />
| <center>[[File:IMAG0691.jpg|250px]]</center> <br />
|<br />
* Clon #252: '''RedSkin'''<br />
* Inicio proyecto: '''01/01/2013'''<br />
* Lugar: '''Sevilla'''<br />
* Tipo: '''Prusa IT2'''<br />
* Impresora Progenitora: '''Zoltanthor'''<br />
| <center></center> <br />
|---------<br />
|<center>[[File:BobMarlin.jpg|250px]]</center><br />
|<br />
* '''Clon #253: '''BobMarlin'''<br />
* '''Lugar''' : Reus (Tarragona)<br />
* '''Familia''' : Mendel Prusa Iteración 3<br />
* '''Autor''' : Robertmika<br />
* '''Nacimiento''' : 17/09/2013<br />
* '''Impresora progenitora''': Desconocido<br />
* '''Electrónica''': Beduino + Ramps 1.4<br />
* '''Firmware''' : Marlin <br />
* '''Hot-End''' : J-Head<br />
|<center>[[File:Bob_marlin_Logo.JPG|250px]]</center><br />
|---------<br />
|<center>[[File:Kyle_22-08-2013.jpg|250px]]</center><br />
|<br />
* '''Clon #254: '''Kyle'''<br />
* '''Lugar''' : Narón (Galicia)<br />
* '''Familia''' : Mendel Prusa Iteración 2<br />
* '''Autor''' : Alejandro Nieto<br />
* '''Nacimiento''' : 22/08/2013<br />
* '''Impresora progenitora''': Desconocido<br />
* '''Electrónica''': Mega 2540 + Ramps 1.4<br />
* '''Firmware''' : Sprinter 1.3.22 <br />
* '''Hot-End''' : E3D-v5<br />
|<center></center><br />
|---------<br />
|<center>[[File:Boneca.png|250px]]</center><br />
|<br />
* '''Clon #255: '''Boneca'''<br />
* '''Lugar''' : Carballo (Galicia)<br />
* '''Familia''' : Mendel Prusa Iteración 3<br />
* '''Autor''' : Pablo Blanco<br />
* '''Nacimiento''' : 23/09/2013<br />
* '''Impresora progenitora''': Super 8<br />
* '''Electrónica''': Mega 2540 + Ramps 1.4<br />
* '''Firmware''' : Marlyn<br />
* '''Hot-End''' : J-head<br />
|<center></center><br />
|---------<br />
|<center>[[File:Herbie_asimov_256.png|250px]]</center><br />
|<br />
* '''Clon #256''': Herbie<br />
* '''Lugar''' : Zaragoza<br />
* '''Familia''' : Prusa Iteración 3 box<br />
* '''Autor''' : Asimov<br />
* '''Nacimiento''' : 25/09/2013<br />
* '''Impresora progenitora''': Giskard<br />
* '''Electrónica''': Mega 2560 + Ramps 1.4<br />
* '''Firmware''' : Sprinter<br />
* '''Hot-End''' : FaryNozzle<br />
|<center></center><br />
|---------<br />
| <center>[[File:prusamendel_gengiskhan.JPG|150px]]</center> <br />
|<br />
* '''Clon #258''': Genghis Khan<br />
* Lugar: Madrid EUITT UPM<br />
* Tipo: [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) Prusa Iteration 2]<br />
* Autor: [http://www.semanasphera.es Asociación de electrónica]<br />
* Nacimiento: '''10/Jun/2013'''<br />
* Impresora progenitora: [http://www.iearobotics.com/wiki/index.php?title=Prusa_Mendel_Iteraci%C3%B3n_2:_R2-reloaded R2-RELOADED]<br />
* Electrónica: [http://reprap.org/wiki/Generation_7_Electronics Gen7 homemade 20MHz]<br />
* Firmware: [http://reprap.org/wiki/Repetier-Firmware Repetier]<br />
* Extrusor: [http://reprap.org/wiki/Wade%27s_Geared_Extruder Wade's extruder] (plástico de 3mm)<br />
* Hot-End: Budas v1.2<br />
*[http://www.semanasphera.es/?q=es/node/6 MÁS INFORMACIÓN]<br />
|<br />
<center>[[File:Aetel.png|150px]]</center><br />
|---------<br />
| <center>[[File:prusai3_thor.JPG|150px]]</center> <br />
|<br />
* '''Clon #259''': Thor<br />
* Lugar: Valencia<br />
* Tipo: [[Prusa i3/es|Prusa i3]]<br />
* Autor: juvaber<br />
* Nacimiento: '''16/Sep/2013'''<br />
* Impresora progenitora: #165: Goliath<br />
* Electrónica: Mega 2560 + Ramps 1.4<br />
* Firmware: [http://reprap.org/wiki/Repetier-Firmware Repetier]<br />
* Extrusor: Jonaskuehling 3mm<br />
* Hot-End: JHead 3mm-0.5<br />
* [[Clone Wars: Thor|Más información]]<br />
|<br />
<center>[[File:Logo_Thor_Hammer.jpg|150px]]</center><br />
|--------<br />
| <center>[[File:Gladiator.jpg|150px]]</center> <br />
|<br />
* '''Clon #262''': <font color="#0000FF">Gladiator</font><br />
* '''Lugar''': A Coruña<br />
* '''Familia''': Prusa i3<br />
* '''Generación''': 6<br />
* '''Autor''': Daniel López García (dalogax)<br />
* '''Impresora progenitora''': Clon #187: Super 8<br />
* '''Nacimiento''': 16/Sept/2013<br />
* '''Descendencia''': Próximamente!<br />
| | <center>[[File:Gladiatorlogo.JPG|150px]]</center><br />
|<br />
<center>[[File:jpg|150px]]</center><br />
|--------<br />
| <center>[[File:|150px]]</center> <br />
|<br />
* '''Clon #277''': <font color="#0000FF">PrintexD</font><br />
* '''Lugar''': Badajoz<br />
* '''Familia''': Prusa i3<br />
* '''Nacimiento''': 13/Oct./2013<br />
* '''Autor''': Sebastian Gallardo<br />
* '''Impresora progenitora''': Clon #187: Super 8<br />
* '''Electrónica:''' Mega 2560 + Ramps 1.4<br />
* '''Firmware:''' Marlin<br />
* '''Extrusor:''' Jonaskuehling<br />
* '''Hot-End:''' Budas chino<br />
* '''Descendencia''': Próximamente!<br />
|<br />
<center>[[File:|150px]]</center><br />
|--------<br />
| <center>[[File:SilviBot3D.jpg]]</center> <br />
|<br />
* '''Clon #278''': <font color="#0000FF">SilviBot3D</font><br />
* '''Lugar''': Cartaya (Huelva)<br />
* '''Familia''': Prusa i3<br />
* '''Nacimiento''': 15/Oct./2013<br />
* '''Autor''': Rubén Pedraza<br />
* '''Impresora progenitora''': La conjunta<br />
* '''Electrónica:''' Mega 2560 + Ramps 1.4<br />
* '''Firmware:''' Marlin<br />
* '''Extrusor:''' Jonaskuehling<br />
* '''Hot-End:''' JHead 3mm-0.5 (Proximamente un Catnozzle)<br />
* '''Descendencia''': Próximamente!<br />
|<br />
<center>[[File:|150px]]</center><br />
|--------<br />
| <center>Proximamente</center> <br />
|<br />
* '''Clon #280''': <font color="#0000FF">WhitePrawn</font><br />
* '''Lugar''': Lepe (Huelva)<br />
* '''Familia''': Prusa i3<br />
* '''Nacimiento''': 18/Oct./2013<br />
* '''Autor''': Manuel Fernández<br />
* '''Impresora progenitora''': Goliath<br />
* '''Electrónica:''' Mega 2560 + Ramps 1.4<br />
* '''Firmware:''' Marlin<br />
* '''Extrusor:''' Jonaskuehling<br />
* '''Hot-End:''' E3D v.5.1 0.3mm (all metal hotend)<br />
* '''Descendencia''': Próximamente!<br />
|<br />
<center>[[File:|150px]]</center><br />
|--------<br />
| <center>[[File:element_115.jpg|250px]]</center> <br />
|<br />
* Clon #282: '''Element 155'''<br />
* Inicio proyecto: '''25/10/2013'''<br />
* Lugar: '''Santander'''<br />
* Tipo: '''Prusa i3'''<br />
* Impresora Progenitora: '''Rewok'''<br />
* '''Nacimiento''' : 27/10/2013<br />
* Autor : '''LUCAS RepRapZ.com''' <br />
| <center>[[File:element_115.png|250px]]</center><br />
|--------<br />
| <center>[[File:Pluton1.jpg|150px]]</center> <br />
|<br />
* '''Clon #283:''' PLUTON<br />
* '''Lugar:''' Ansoain (Navarra)<br />
* '''Tipo:''' Printrbot V2<br />
* '''Impresora Progenitora:''' Reclone 3d´s Farm<br />
* '''Nacimiento:''' 18/10/2013<br />
* '''Electrónica:''' Mega 2560 + Ramps 1.4<br />
* '''Firmware:''' Sprinter<br />
* '''Hot-End:''' J-Head MK-V Hispania<br />
* '''Autor :''' Eduardo Múgica <br />
| <center>[[File:Pluton2.png|150px]]</center> <br />
|--------<br />
| <center>[[File:Impresora_Torcal.jpg|150px]]</center> <br />
|<br />
* '''Clon #290:''' TORCAL<br />
* '''Lugar:''' Alcalá de Henares (Madrid)<br />
* '''Tipo:''' BCN3D<br />
* '''Impresora Progenitora:''' Rewok<br />
* '''Nacimiento:''' 20/10/2013<br />
* '''Electrónica:''' Mega 2560 + Ramps 1.4<br />
* '''Firmware:''' Marlin<br />
* '''Hot-End:''' E3D<br />
* '''Autor :''' Paco Ríos<br />
| <center>[[File:Obras.jpg|150px]]</center> <br />
|--------<br />
| <center>[[File:The Purpple Angel2.JPG|150px]]</center> <br />
|<br />
* '''Clon #292''': <font color="#0000FF">The Purpple Angel</font><br />
* '''Lugar''': Vera (Almería)<br />
* '''Familia''': Prusa i3<br />
* '''Nacimiento''': 16/Oct./2013<br />
* '''Autor''': Jose Antonio Pérez Caparrós<br />
* '''Impresora progenitora''': [http://reprap.org/wiki/Clone_wars:_Ronqu%C3%ADo/es Ronquío Clon 133]<br />
* '''Electrónica:''' Mega 2560 + Ramps 1.4<br />
* '''Firmware:''' Marlin<br />
* '''Extrusor:''' Jonaskuehling<br />
* '''Hot-End:''' Magma 3mm-0.5<br />
* '''Descendencia''': Próximamente!<br />
|<br />
<center>[[File:Logo TPA.jpg|150px]]</center><br />
|--------<br />
| <center>[[File:mAka.jpg|200px]]</center><br />
|<br />
* '''Clon #295''': '''<font color="#006666">mAka</font>'''<br />
* '''Lugar''': Zaragoza<br />
* '''Familia''': Prusa entre i3 e i2 con variaciones<br />
* '''Nacimiento''': 18/Dic/2013<br />
* '''Autor''': sacamantecas<br />
* '''Impresora progenitora''': no tiene, es hija de los árboles<br />
* '''Electrónica''': Arduino 2560 (genuino) + RAMPS 1.4<br />
* '''Firmware''': Marlin con añadidos<br />
* '''Extrusor''': artesanal<br />
* '''Hot-End''': G3D con el refrigerador modificado<br />
* '''Peculiaridades''': parece una Prusa i3 pero tiene el motor X hacia el interior, el eje X de i2, pero con la correa dentada por debajo<br />
* '''Más información''': Hay disponible una '''[https://sites.google.com/site/cosasdeluiso/maka hoja de ruta]''' con precios, fotos, detalles y vídeos.<br />
| <center>[[File:sacamantecas.png|200px]]</center><br />
<br />
|--------<br />
|<center> [[File:Alextrasza.jpg|250px]]</center><br />
|<br />
* '''Clon #296''': '''<font color="#006666">Alextrasza</font>'''<br />
* '''Lugar''': A Coruña<br />
* '''Familia''': [http://www.reprap.org/wiki/P3Steel P3Steel]<br />
* '''Generación''': 7ª <br />
* '''Inicio proyecto''': 14/Oct/2013<br />
* '''Nacimiento''': 16/Dic/2013<br />
* '''Autor''': [http://www.reprap.org/wiki/User:Jbabio Jbabio]<br />
* '''Impresora progenitora''': #256 herbie<br />
* '''Electrónica''': Arduino 2560 (genuino) + RAMPS 1.4 + SmartLCD<br />
* '''Firmware''': Repetier 0.83<br />
* '''Extrusor''': [http://www.thingiverse.com/thing:26817 Prusa i3 Direct Drive Bowden Extruder] de Indieflow<br />
* '''Hot-End''': J-Head MK V-B de Reprapsource.com<br />
|<center> [[File:Alextrasza.jpg|200px]]</center><br />
|--------<br />
|<center> [[File:Ingenio1.0.jpg|250px]]</center><br />
|<br />
* '''Clon #298''': '''<font color="#006666">Ingenio</font>'''<br />
* '''Lugar''': Madrid<br />
* '''Familia''': [http://www.reprap.org/wiki/Clone_wars:_Prusa_iteración_3 | Prusa i3]<br />
* '''Generación''': 5ª <br />
* '''Inicio proyecto''': 5/Oct/2013<br />
* '''Nacimiento''': 27/Dic/2013<br />
* '''Autor''': [http://www.reprap.org/wiki/User:Fid | Fid]<br />
* '''Impresora progenitora''': #187: Super 8.<br />
* '''Electrónica''': Arduino 2560 + RAMPS 1.4<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': <br />
* '''Hot-End''': [http://reprap.org/wiki/Aluhotend | Aluhotend] de [http://reprap.org/wiki/User:Thejollygrimreaper | Thejollygrimreaper]<br />
|<center> [[File:Ingenio1.0.jpg|200px]]</center><br />
|--------<br />
|<center> [[File:SUSII.jpg|250px]]</center><br />
|<br />
* '''Clon #302''': '''<font color="#006666">SUSI I</font>'''<br />
* '''Lugar''': Medellin, Colombia<br />
* '''Familia''': [http://reprap.org/wiki/RepStrap Repstrap]<br />
* '''Generación''': 1 <br />
* '''Inicio proyecto''': 10/Sep/2013<br />
* '''Nacimiento''': 27/Dic/2013<br />
* '''Autor''': [http://www.reprap.org/wiki/User:alejoair | Alejandro Cuartas]<br />
* '''Electrónica''': Arduino 2560 + RAMPS 1.4<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Casero<br />
* '''Hot-End''': AllMetal Hotend Casero<br />
|<center> [[File:SUSII.jpg|200px]]</center><br />
|--------<br />
|<center> [[File:Tatooine.jpg|250px]]</center><br />
|<br />
* '''Clon #305''': '''<font color="#006666">Tatooine</font>'''<br />
* '''Lugar''': Barcelona<br />
* '''Familia''': [http://reprap.org/wiki/Prusa_Mendel_Assembly_(iteration_2) | Prusa i2]<br />
* '''Generación''': 3ª <br />
* '''Inicio proyecto''': 15/Jul/2012<br />
* '''Nacimiento''': 7/Ene/2014<br />
* '''Autor''': Isaac Muro<br />
* '''Impresora progenitora''': #4: Mardan.<br />
* '''Electrónica''': Arduino 2560 + RAMPS 1.4<br />
* '''Firmware''': Sprinter<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': J-Head MK-V<br />
* '''Más información''': [[Clone wars: Impresora Tatooine|Tattoine]]<br />
|<center> [[File:Tatooine.jpg|200px]]</center><br />
|--------<br />
|<center> [[File:Golem.jpg|250px]]</center><br />
|<br />
* '''Clon #307''': '''<font color="#006666">Golem</font>'''<br />
* '''Lugar''': Cuenca<br />
* '''Familia''': P3Steel<br />
* '''Generación''': 2ª <br />
* '''Inicio proyecto''': 15/DIC./2013<br />
* '''Nacimiento''': 10/Ene/2014<br />
* '''Autor''': Pedro Lahuerta<br />
* '''Impresora progenitora''': #228: Proteus.<br />
* '''Electrónica''': Arduino 2560 + RAMPS 1.4<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': CatNozzle<br />
* '''Más información''': [[Clone wars: Impresora Golem|Golem]]<br />
||<center> [[File:Golem.jpg|200px]]</center><br />
|--------<br />
<br />
<br />
|--------<br />
|<center> [[File:aiculina.jpg|250px]]</center><br />
|<br />
* '''Clon #308''': '''<font color="#006666">Aiculina</font>'''<br />
* '''Lugar''': Granada<br />
* '''Familia''': P3Steel<br />
* '''Generación''': 5 <br />
* '''Inicio proyecto''': 10/OCT./2013<br />
* '''Nacimiento''': 04/Ene/2014<br />
* '''Autor''': Juanma (Exodous)<br />
* '''Impresora progenitora''': #120: Exoudina3D.<br />
* '''Electrónica''': Arduino 2560 + RAMPS 1.4<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': Casero tipo J-Head<br />
||<center> [[File:exodous_fire.jpg|200px]]</center><br />
|--------<br />
<br />
|--------<br />
|<center> []</center><br />
|<br />
* '''Clon #309''': '''<font color="#006666">Éireland</font>'''<br />
* '''Lugar''': Ourense<br />
* '''Familia''': PI3 Metacrilato<br />
* '''Generación''': 4<br />
* '''Inicio proyecto''': 10/Ene./2014<br />
* '''Nacimiento''': 14/Ene/2014<br />
* '''Autor''': Cardiak Brain(Éireland)<br />
* '''Impresora progenitora''': #30: X-Wing.<br />
* '''Electrónica''': Arduino 2560 + RAMPS 1.4<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': J-Head Hispania<br />
||<center> []</center><br />
|--------<br />
<br />
|--------<br />
|<center> [[File:Breaking_TAZ.jpg|250px]]</center><br />
|<br />
* '''Clon #312''': '''<font color="#006666">Breaking TAZ</font>'''<br />
* '''Lugar''': Pontevedra<br />
* '''Familia''': TAZ<br />
* '''Generación''': 6 <br />
* '''Inicio proyecto''': 15/AGO./2013<br />
* '''Nacimiento''': 12/Ene/2014<br />
* '''Autor''': Mario Crespo (MCVet)<br />
* '''Impresora progenitora''': #311: Ctrl-Z.<br />
* '''Electrónica''': Printrboard Rev.D<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': Catnozzle<br />
||<center> [[File:Breaking_TAZ.jpg|200px]]</center><br />
|--------<br />
<br />
|--------<br />
|<center> [[File:libelulalogo.png|150px]]</center><br />
|<br />
* '''Clon #315:'''<font color="#004080">'''Tröllslanda (Libelula)'''</font>.<br />
* '''Lugar''': Suecia<br />
* '''Tipo''': Prusa i2<br />
* '''Autor''': Pedro Rivera <br />
* '''Impresora progenitora:''' ""R3"" <br />
* '''Generación''': 4a <br />
**'''Nacimiento''':12/Mar/2012<br />
**'''Electrónica''': Arduino Mega 2560 + Ramps 1.3<br />
**'''Firmware:''' : Sprinter<br />
**'''Hot-End''': Budaschnozzle 1.2a<br />
<br />
|<br />
<center> [[File:libelulalogo.png|150px]]</center><br />
<br />
<br />
|-------------<br />
| <center>[[File:PATUSA.jpg | 150px ]]</center> <br />
|<br />
* '''Clon #317''': <font color="#0000FF">PATUSA</font><br />
* '''Lugar''': Ciudad Real<br />
* '''Familia''': Prusa Iteración 3 CON LCD<br />
* '''Autor''': PATMURT<br />
* '''Impresora progenitora''': Desconocida<br />
* '''Nacimiento''': 18/Ene/2013<br />
*'''Electrónica''': Arduino Mega 2560 + Ramps 1.4<br />
*'''Firmware:''' : Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
*'''Hot-End''': J-Head<br />
<br />
| | <center>[[File:PATUSA_printing.JPG | 150px]]</center> <br />
|-------------<br />
<br />
<br />
|-------------<br />
| <center>[[File:agrobot_foto.jpg | 180px ]]</center> <br />
|<br />
* '''Clon #318''': <font color="#00FF00">AgroBot</font><br />
* '''Lugar''': Cerceda (A Coruña)<br />
* '''Familia''': Prusa Iteración 3 LCD+SD<br />
* '''Autor''': CgendeCW<br />
* '''Impresora progenitora''': Clon #187: Super 8<br />
* '''Nacimiento''': 29/Ene/2014<br />
*'''Electrónica''': Gen7AVR 1.5<br />
*'''Firmware:''' : Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
*'''Hot-End''': Budas chino Getech<br />
<br />
| | <center>[[File:agrobot_logo.jpg | 300px]]</center> <br />
|-------------<br />
| <center>[[File:Sputnik_final.JPG|300px]]</center><br />
|<br />
* '''Clon #319:''' SPUTNIK<br />
* '''Lugar:''' Zamora.<br />
* '''Tipo:''' Prusa i3 single frame.<br />
* '''Autor:''' Héctor Pérez<br />
* '''Nacimiento:''' 14/11/2013<br />
** '''Electrónica:''' Iduino Mega + RAMPS 1.4<br />
** '''Firmware:''' Marlin<br />
** '''Hotend:''' Buda chino<br />
** '''Otros:''' Ventilador de capa fuera del extrusor<br />
| <center>[[File:sputnik_teck.jpg|200px]]</center><br />
|<br />
|-------------<br />
| <center>[[File:CW_Shai-Hulud.jpg | 180px ]]</center> <br />
|<br />
* '''Clon #320''': <font color="#00FF00">Shai-Hulud</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': Tantillus<br />
* '''Autor''': Jose M. Martín<br />
* '''Impresora progenitora''': Clon #185: Gort<br />
* '''Nacimiento''': 03/Feb/2014<br />
*'''Electrónica''': RAMPS 1.4<br />
*'''Firmware:''' : Marlin<br />
* '''Extrusor''': Tantillus<br />
*'''Hot-End''': Hotend J-Head "Hispania"<br />
<br />
| | <center>[[File:CW_Shai_Hulud_logo.jpg | 300px]]</center> <br />
|-------------<br />
<br />
|-------------<br />
| <center>[[File:roseta_foto.jpg | 180px ]]</center><br />
|<br />
* '''Clon #321''': <font color="#00FF00”>Roseta</font><br />
* '''Lugar''': DISCA (UPV) Valencia, Spain<br />
* '''Familia''': Prusa Iteración 3<br />
* '''Autor''': David<br />
* '''Impresora progenitora''': Adoptada<br />
* '''Nacimiento''': 29/Ene/2014<br />
*'''Electrónica''': RAMPS 1.4<br />
*'''Firmware:''' : Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
*'''Hot-End''': Budas gallego<br />
| | <center>[[File:roseta_logo.jpg | 300px]]</center><br />
|-------------<br />
<br />
|-------------<br />
| <center>[[File:Clon-323-LMakerXY.jpg|250px]]</center><br />
|<br />
* '''Clon #323''': <font color="#0000FF">LMakerXY</font><br />
* '''Lugar''': Madrid<br />
* '''Familia''': CoreXY<br />
* '''Generación'': 3<br />
* '''Autor''': Luis Macías<br />
* '''Impresora progenitora''': Spica<br />
* '''Nacimiento''': 1-Feb-2014<br />
* '''Electrónica''': Sanguinololu 1.3a (Provisional)<br />
* '''Firmware:''' : Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': Leonozzle<br />
* [[Clone wars Impresora LMakerXY|Mas información]]<br />
| <center>[[File:CoreXY.jpg|300px]]</center> <br />
|-------------<br />
<br />
|-------------<br />
| <center>[[File:pruss.jpg | 180px ]]</center><br />
|<br />
* '''Clon #325''': <font color="#00FF00”>Metaprint</font><br />
* '''Lugar''': Cádiz, Spain<br />
* '''Familia''': Prusa Iteración 3<br />
* '''Autor''': Miguelop24<br />
* '''Impresora progenitora''': Desconocida<br />
* '''Nacimiento''': 09/Feb/2014<br />
*'''Electrónica''': RAMPS 1.4<br />
*'''Firmware:''' : Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
*'''Hot-End''': Polaco-nozzle<br />
| <center>[[File:medalla.jpg | 300px]]</center><br />
|-------------<br />
<br />
|-------------<br />
| <center>[[File:Creabot.jpg | 180px ]]</center><br />
|<br />
* '''Clon #330''': <font color="#00FF00”>CreaBot</font><br />
* '''Lugar''': Madrid, Spain<br />
* '''Familia''': Prusa Iteración 3<br />
* '''Autor''': AngelLM<br />
* '''Impresora progenitora''': Desconocida<br />
* '''Nacimiento''': 02/Feb/2014<br />
*'''Electrónica''': RAMPS 1.4<br />
*'''Firmware:''' : Marlin<br />
* '''Extrusor''': Jonaskuehling<br />
*'''Hot-End''': Budas Chino<br />
| <center>[[File:creabot1.png | 180px]]</center><br />
|---<br />
| <center>[[File:I3_stryper.jpg|250px]]</center> <br />
|<br />
* '''Clon #334:''' <font color="#0000FF">'''I3 Stryper'''</font>.<br />
* '''Lugar''': Pamplona<br />
* '''Familia''': [http://www.reprap.org/wiki/Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame Prusa Iteración 3 Single Frame]<br />
* '''Generación''': 7<br />
* '''Autor''': [[User:lokus77|LoKuS77]]<br />
* '''Impresora progenitora''': Madre:baru (Sin inscribir), Abuela: jester (Sin inscribir), Bisabuelas: #39, #134,#90<br />
* '''Nacimiento:''' 10 de Febrero de 2014<br />
* '''Electrónica''': [http://reprap.org/wiki/RAMPS_1.4/es Ramps 1.4]<br />
* '''Extrusor''': Jonaskuehling<br />
* '''Hot-End''': [http://e3d-online.com/E3D-HotEnds/E3D-V5-3mm-Direct-All-Metal-HotEnd E3Dv5 3mm]<br />
* '''Firmware''': [[Marlin]]<br />
| <center>[[File:Lokus_stryper.jpg|150px]]</center><br />
|---<br />
| <center>[[File:PopCW.jpg|250px]]</center> <br />
|<br />
* '''Clon #335:''' <font color="#0000FF">'''Pop'''</font>.<br />
* '''Lugar''': A Coruña.<br />
* '''Familia''': FoldaRap 1.1<br />
* '''Generación''': 6<br />
* '''Autor''': [[User:XoanSampaiño|Xoan Sampaiño]]<br />
* '''Impresora progenitora''': Clon #187, Super 8<br />
* '''Nacimiento:''' 7 de marzo de 2014<br />
* '''Electrónica''': [[Sanguinololu]]<br />
* '''Hot-End''': [http://tech3d.org/Machined-Parts Tech3D Machined Parts]<br />
* '''Firmware''': [[Marlin]]<br />
| <center>[[File:PopCW_Logo.jpg|150px]]</center><br />
|---<br />
|}<br />
<br />
ATENCIÓN: Antes de insertar una impresora, [http://maytheclonebewithyou.com/ asegúrate de qué número te toca]<br />
<br />
== Clones en la academia Jedi ==<br />
<br />
En la academia Jedi se encuentran '''todos los clones en construcción'''. Una vez que imprimen su primera pieza alcanzan la categoría de Jedi y salen de la Academia<br />
<br />
{| class="wikitable"<br />
|- <br />
| [[File:Clone-wars-jedi-academy.png|150px|link=Clone wars: Academia Jedi]]<br />
| [[Clone wars: Academia Jedi/es|ACCESO A LA ACADEMIA JEDI]]<br />
|}<br />
<br />
== Clones en Carbonita ==<br />
Clones sin actividad durante bastante tiempo. Posiblemente hayan abandonado el proyecto<br />
<br />
{| class="wikitable"<br />
|- <br />
| [[File:Han-solo-carbonita.jpg|150px|link=Clone wars: Clones en Carbonita]]<br />
| [[Clone wars: Clones en Carbonita| CLONES EN CARBONITA]]<br />
|}<br />
<br />
== Album de fotos y vídeos ==<br />
<br />
{| class="wikitable" style="text-align:center" border="0"<br />
! align="center" colspan="3" | [[Clon_wars:_Album_de_Fotos | Ver Álbum de Fotos completo]]<br />
|- align="center"<br />
| [[File:DSC04024.JPG|200px|link=Clon_wars:_Album_de_Fotos]]<br>'''31/Dic/2011''': Piezas impresas <br> por el Clon R2D2<br />
| [[File:R2D2-cubo-1.jpg|200px|link=Clon_wars:_Album_de_Fotos]]<br>'''24/Dic/2011''': El clon R2D2 ha <br> impreso su primera pieza<br />
| [[File:DSC03885.JPG|200px|link=Clon_wars:_Album_de_Fotos]]<br>'''16/Dic/2011''': Tercera reunión <br> de Clone Wars<br />
|}<br />
<br />
<br />
{| class="wikitable" style="text-align:center" <br />
! align="center" colspan="3" border="0" | [[Clone wars: Album de Videos| Ver Álbum de Vídeos completo]]<br />
|- <br />
|| <videoflash>tDHL7AZm_y8|300|250</videoflash><br />
|| <videoflash>oC_1Tjw196Y|300|250</videoflash><br />
|| <videoflash>_Q3XlmnbWrM|300|250</videoflash><br />
|- <br />
|| '''24/Dic/2011''': Clon R2D2. <br> Primera impresión del Clon R2D2<br />
|| '''20/Dic/2011''': Clon R2D2. <br> Probando el extrusor<br />
|| '''12/Jun/2013''': Clon Gutenberg<br>Adaptación a fresadora<br />
|- <br />
|| <videoflash>zNMdKdazemM|300|250</videoflash><br />
|- <br />
|| '''11/Jun/2013''': Clon Gutenberg<br>Prueba de velocidad como plotter<br />
<br />
|}<br />
<br />
<br />
{| class="wikitable"<br />
|-<br />
|<br />
[[File:Clone-Wars-logo.png|border|100px|link=Proyecto Clone Wars]]<br />
| [[Proyecto Clone Wars]]<br />
|}<br />
<br />
<br />
[[Category:Clone wars/es]]</div>
Lokus77
https://reprap.org/mediawiki/index.php?title=Clone_Wars:_Impresora_Stryper&diff=119577
Clone Wars: Impresora Stryper
2014-03-10T10:01:42Z
<p>Lokus77: /* Ficha */</p>
<hr />
<div>== Ficha ==<br />
{| class="wikitable" style="width:100%"<br />
|- <br />
| <center>[[File:I3_stryper.jpg|thumb|Impresora Stryper.]]</center><br />
|<br />
* '''Nombre''': '''<font color="#0000FF">Stryper</font>'''<br />
* '''Rango''': Jedi <br />
* '''Familia''': [[Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame |Prusa Mendel Iteration 3]]<br />
* '''Generación''': 7<br />
* '''Material''': Plástico ABS Amarillo. Metacrilato negro 10mm.<br />
* '''Color''': Negro / Amarillo<br />
* '''Electrónica''': [[RAMPS|RAMPS 1.4]]<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Gregs-Jonaskuehling V4<br />
* '''Hot-End''': E3D-v5 3mm<br />
* '''Nacimiento''': 10/02/2014<br />
* '''Impresora Progenitora''': Madre:baru (Sin inscribir), Abuela: jester (Sin inscribir), Bisabuelas: #39, #134,#90<br />
* '''Hijos''': Sin descendencia (por ahora)<br />
* '''Galería ''': [https://plus.google.com/photos/118042097759435445983/albums/5986890523351025217 FOTOS]<br />
| <center></center><br />
|}</div>
Lokus77
https://reprap.org/mediawiki/index.php?title=Clone_Wars:_Impresora_Stryper&diff=119576
Clone Wars: Impresora Stryper
2014-03-10T09:54:05Z
<p>Lokus77: /* Ficha */</p>
<hr />
<div>== Ficha ==<br />
{| class="wikitable" style="width:100%"<br />
|- <br />
| <center>[[File:I3_stryper.jpg|thumb|Impresora Stryper.]]</center><br />
|<br />
* '''Nombre''': '''<font color="#0000FF">Stryper</font>'''<br />
* '''Rango''': Jedi <br />
* '''Familia''': [[Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame |Prusa Mendel Iteration 3]]<br />
* '''Generación''': 7<br />
* '''Material''': Plástico ABS Amarillo. Metacrilato negro 10mm.<br />
* '''Color''': Negro / Amarillo<br />
* '''Electrónica''': [[RAMPS|RAMPS 1.4]]<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Gregs-Jonaskuehling V4<br />
* '''Hot-End''': E3D-v5 3mm<br />
* '''Nacimiento''': 10/02/2014<br />
* '''Impresora Progenitora''': Madre:baru (Sin inscribir), Abuela: jester (Sin inscribir), Bisabuelas: #39, #134,#90<br />
* '''Hijos''': Sin descendencia (por ahora)<br />
| <center></center><br />
|}</div>
Lokus77
https://reprap.org/mediawiki/index.php?title=Clone_Wars:_Impresora_Stryper&diff=119575
Clone Wars: Impresora Stryper
2014-03-10T09:53:14Z
<p>Lokus77: Created page with "== Ficha == {| class="wikitable" style="width:100%" |- | <center>Impresora Stryper.</center> | * '''Nombre''': '''<font color="#0000FF">Stryper<..."</p>
<hr />
<div>== Ficha ==<br />
{| class="wikitable" style="width:100%"<br />
|- <br />
| <center>[[File:I3_stryper.jpg|thumb|Impresora Stryper.]]</center><br />
|<br />
* '''Nombre''': '''<font color="#0000FF">Stryper</font>'''<br />
* '''Rango''': Jedi <br />
* '''Familia''': [[Clone_wars:_Prusa_iteraci%C3%B3n_3_single_frame |Prusa Mendel Iteration 3]]<br />
* '''Generación''': 7<br />
* '''Material''': Plástico ABS<br />
* '''Color''': Negro / Amarillo<br />
* '''Electrónica''': [[RAMPS|RAMPS 1.4]]<br />
* '''Firmware''': Marlin<br />
* '''Extrusor''': Gregs-Jonaskuehling V4<br />
* '''Hot-End''': E3D-v5 3mm<br />
* '''Nacimiento''': 10/02/2014<br />
* '''Impresora Progenitora''': Madre:baru (Sin inscribir), Abuela: jester (Sin inscribir), Bisabuelas: #39, #134,#90<br />
* '''Hijos''': Sin descendencia (por ahora)<br />
| <center></center><br />
|}</div>
Lokus77
https://reprap.org/mediawiki/index.php?title=User:Lokus77&diff=119574
User:Lokus77
2014-03-10T09:38:41Z
<p>Lokus77: Created page with " <center>150px * '''Contacto''': lokus1977@gmail.com * '''Ubicacion''': Pamplona, Navarra (Spain) </center>"</p>
<hr />
<div><br />
<center>[[File:Lokus_stryper.jpg|150px]]<br />
* '''Contacto''': lokus1977@gmail.com<br />
* '''Ubicacion''': Pamplona, Navarra (Spain)<br />
</center></div>
Lokus77
https://reprap.org/mediawiki/index.php?title=File:I3_stryper.jpg&diff=119573
File:I3 stryper.jpg
2014-03-10T08:57:51Z
<p>Lokus77: </p>
<hr />
<div></div>
Lokus77
https://reprap.org/mediawiki/index.php?title=File:Lokus_stryper.jpg&diff=119572
File:Lokus stryper.jpg
2014-03-10T08:36:59Z
<p>Lokus77: </p>
<hr />
<div></div>
Lokus77