Tweezers

From RepRap
Jump to: navigation, search
Crystal Clear action run.png
Tweezers

Release status: unknown

No image available.png
Description
PLA + Silicone Tweezers
License
Author
Contributors
Based-on
Categories
CAD Models
External Link


I needed a pair of tweezers, so I designed the following pair. The end of the tweezers consists of a PLA inner section for rigidity/stiffness, which is then encased in silicone for added grip. The entire thing is printed in one shot using our highly experimental multiple material setup.

Tweezers.jpg

For more details see the blog post here

FILE ID# TYPE DESCRIPTION AVAILABLE FORMATS CREATED/RESERVED BY
N/A - TBD 001? (Multimaterial PLA and Silicone Tweezers) This tweezers were created to test Mendel_Multiple_Extruder

File:Tweezers.zip - Zip file containing the STLs

--RhysJones 04:14, 19 August 2010 (UTC)
N/A - TBD 002? Original CAD files This was used to make the stls. File:Tweezers.cad.xml.zip --RhysJones (N/A - TBD) (UTC)