TowerSimpleXL

From RepRapWiki
Jump to: navigation, search


TowerSimpleXL Documentation
Main page | TowerSimpleXL Buyer's Guide | TowerSimpleXL Build Manual | TowerSimpleXL User Manual | TowerSimpleXL improvements


Crystal Clear action run.png
TowerSimpleXL

Release status: working

SimpleXL.jpg
Description TowerSimpleXL
License GPL
Author AlmusYang
Contributors
Based-on TowerSimpleXL
Categories TowerSimpleXL
CAD Models none
External Link []


Contents

Introduction

[TowerSimpleXL]

How to make a 3d printer under 200$.

This 3D printer -Tower Simple XL, have 6* 6* 6 Inches build volum and you can build it without any 3Dprint part.(*Laser cutting needed*)

Details on thingiverse and instructables.


What's new

2015/5/1

- http://www.thingiverse.com/thing:797666

- http://www.instructables.com/id/Building-a-3D-Printer-Under-200/


Files

Lasercut files: File:TowerSimpleXL.zip


TowerSimple XL


XL Lasercut


XL Lasercut







Details

- Layer resolution: up to 20 micron

- Build volume: 6 x 6 x 6 in

- Position precision X Y Z: 12.5 / 12.5 / 5 micron

- Print speed: 30 mm/s - 100 mm/s

- Travel speed: 30 mm/s - 150 mm/s

- Recommended filament diameter: 1.75 mm

- Nozzle diameter: 0.4 mm

- Stand-alone SD-card printing

- Software: Cura

- Print technology: Fused filament fabrication (FFF)

- Operation nozzle temperature: 180° - 200° C

- Ambient operation temperature: 15° - 32° C

- Storage temperature: 0° - 32° C

- AC input: 220 V

- Power requirements: 12 V DC / 6 AMPS