User contributions
From RepRapWiki
(Latest | Earliest) View (newer 50) (older 50) (20 | 50 | 100 | 250 | 500)
- 15:44, 23 March 2012 (hist) (diff) Wallace (→Printed parts)
- 02:41, 11 March 2012 (hist) (diff) Heated Bed (→Hot Plate: Add motorcycle grip heaters per http://open3dp.me.washington.edu/2012/03/of-hbp-and-other-hot-things/)
- 20:53, 8 March 2012 (hist) (diff) Printing Material Suppliers (→3mm diameter filament)
- 17:36, 8 March 2012 (hist) (diff) m Comparison of Electronics (Correct R2C2 limt switches and temp sensors to 3 & 2)
- 17:32, 8 March 2012 (hist) (diff) Comparison of Electronics (attempt to make the table sortable per http://meta.wikimedia.org/wiki/Help:Sorting)
- 03:46, 8 March 2012 (hist) (diff) m Polycarbonate (→Availability: $23 per 0.5 lb & 3mm link) (top)
- 19:03, 7 March 2012 (hist) (diff) Talk:Mendel90 (MDF CTE is very likely less than steel.)
- 16:21, 6 March 2012 (hist) (diff) m Printrboard (→Building Firmware: add links)
- 16:18, 6 March 2012 (hist) (diff) Printrboard (→Where to get it: estimate of availability after 2012-April)
- 16:12, 6 March 2012 (hist) (diff) Comparison of Electronics (Add Teensylu and Printrboard)
- 16:06, 6 March 2012 (hist) (diff) Comparison of Electronics
- 17:14, 5 March 2012 (hist) (diff) m Cost Reduction (→Hot End)
- 17:00, 5 March 2012 (hist) (diff) Mendel90 (Adjust some advantages and disadvantages)
- 16:35, 5 March 2012 (hist) (diff) Frame material (→cut-to-shape construction materials: Add Mendel90) (top)
- 16:11, 4 March 2012 (hist) (diff) Mendel90 (→Disadvantages: As compared with Prusa, a build volume increase for Mendel90 would require a similar frame transplant.)
- 16:07, 4 March 2012 (hist) (diff) Mendel90 (→Advantages)
- 15:55, 4 March 2012 (hist) (diff) Mendel90 (Add link to Nophead's design pages and a thingiverse page)
- 04:28, 1 March 2012 (hist) (diff) Teacup Firmware (→Distances as expressed in steps: Thanks, the steps/second testing helps a lot for estimating max feedrates.)
- 20:11, 29 February 2012 (hist) (diff) Teacup Firmware (→Distances as expressed in steps)
- 19:52, 27 February 2012 (hist) (diff) Materials (→Steel)
- 19:47, 27 February 2012 (hist) (diff) Materials (→PEEK)
- 19:44, 27 February 2012 (hist) (diff) m Materials (→PEEK: add CTC)
- 19:42, 27 February 2012 (hist) (diff) m Materials (→Copper: add CTC)
- 19:40, 27 February 2012 (hist) (diff) m Materials (→Aluminum: add CTC numbers)
- 19:37, 27 February 2012 (hist) (diff) Materials (→Steel)
- 23:58, 26 February 2012 (hist) (diff) J Head Nozzle (→Weights: Add OAL of ~62mm)
- 17:01, 26 February 2012 (hist) (diff) m Teacup Firmware (→Distances as expressed in steps)
- 16:54, 26 February 2012 (hist) (diff) Teacup Firmware (→Constant Acceleration: Add distance and velocity customizations)
- 14:53, 26 February 2012 (hist) (diff) m Pololu stepper driver board (→Tuning: fix link)
- 14:52, 26 February 2012 (hist) (diff) Pololu stepper driver board (Add formula for tuning)
- 07:58, 26 February 2012 (hist) (diff) User:DaveX (Replaced stepper and tuned Pololus) (top)
- 03:42, 26 February 2012 (hist) (diff) Pololu Electronics (→Teensy Breadboard: Tested USB connection at 250000 baud with modified Teacup) (top)
- 03:22, 25 February 2012 (hist) (diff) m Protected Mosfet
- 03:19, 25 February 2012 (hist) (diff) m Sanguinololu (→Soldering Sanguinololu Core)
- 03:17, 25 February 2012 (hist) (diff) N Protected Mosfet (A table of various MOSFETS and protection in use in RepRaps)
- 02:38, 25 February 2012 (hist) (diff) m RAMPS 1.2 (top)
- 02:36, 25 February 2012 (hist) (diff) m RAMPS 1.2
- 21:22, 21 February 2012 (hist) (diff) Kapton (→Description)
- 21:20, 21 February 2012 (hist) (diff) Kapton (→Description: Add some reference numbers about Kapton)
- 21:09, 21 February 2012 (hist) (diff) Stepper motor (→Heat: Add numeric example of derating torque for a heat constraint.)
- 21:06, 21 February 2012 (hist) (diff) PLA (Added glass transition temperature)
- 20:43, 20 February 2012 (hist) (diff) User:DaveX (Burned up a stepper in my build.)
- 20:00, 20 February 2012 (hist) (diff) Pololu stepper driver board (Note that the symptom of using the overcurrent protection is pulsing.)
- 03:00, 19 February 2012 (hist) (diff) m Wallace ("Full size" build volume is 200x200x140)
- 20:07, 18 February 2012 (hist) (diff) User:DaveX (Correct the smooth rod lengths, measure the build volume, and the overall dimensions of my Wallace)
- 19:22, 18 February 2012 (hist) (diff) Wallace Build Manual (→Dimensions: Add link to pictures of 350x300x430 smooth rods giving a 172x218x220 build volume & increase my X-rod recommendation to 380mm for 200mm X with a Wade's)
- 18:54, 18 February 2012 (hist) (diff) N User:DaveX/WallacePics (Page collecting some pictures of the current state of my Wallace) (top)
- 18:47, 18 February 2012 (hist) (diff) N File:WallaceDaveX20120218-Zneg.JPG (View along negative Z axis of User:DaveX's Wallace, showing bed, dimension measurements, nophead's half-belt twist and face-to-face clamping of belt in X-carriage.) (top)
- 18:45, 18 February 2012 (hist) (diff) N File:WallaceDaveX20120218-Yneg.JPG (View along negative Y axis of User:DaveX's Wallace, showing nophead's half-belt twist and face-to-face clamping of belt in X-carriage.) (top)
- 18:43, 18 February 2012 (hist) (diff) N File:WallaceDaveX20120218-XnegHigh.JPG (Higher view along negative X of User:DaveX's Wallace, showing overall height of 442 based on 430mm z rods, and maybe 220 mm of Z travel.) (top)
(Latest | Earliest) View (newer 50) (older 50) (20 | 50 | 100 | 250 | 500)
