From RepRapWiki

Contents 1 Assemble 8 Bearings 2 Assemble 4 Bearing Supports 3 Assemble Belt Plate 4 Assemble 2 Halves 5 Assemble Bottom Half 6 Assemble Top Half 7 Final Assembly

Assemble 8 Bearings

Assemble 4 Bearing Supports

Assemble Belt Plate

Assemble 2 Halves

Assemble Bottom Half

Assemble Top Half

If you are using the Mark-IV extruder, then add the Mark-IV adaptor plate to the top half. Otherwise add part of your extruder assembly to the top half.

Final Assembly