I3 Z axis assembly

From RepRap
Jump to: navigation, search


Bill of materials | The main panel frame assembly | Y-axis assembly | X-axis assembly | Z-axis assembly

Connecting X-axiz and Z-axiz | Power and LCD assembly | Extruder assembly | Heating bed assembly

power switch and end stops assembly | Control Board assembly and wiring | Circuit Diagram

Z-axis motor assembly

Need parts:

  • 2×NEMA17 stepper motor
  • 2×5*5 compling

Step 1

Insert motor shaft into compling and screw tighten.

Z axis assembly1.jpg

Step 2

Insert stepper motor wires.Insert the motor wires from the bottom.

Z axis assembly2.jpg
Z axis assembly3.jpg
Z axis assembly4.jpg

Step 3

Fixed the motor onto the acrylic frame.(M3*10 screws 8pcs, M3 gasket 8pcs),Please With the hex wrench to tighten the screws.

Z axis assembly5.jpg
Z axis assembly6.jpg