FoldaRap Batch2
The first was here FoldaRap_Batch1
This time, it will be made via GOTEO (think of kickstarter but only for projects that contribute to the commons).
Let's anticipate a little, 2013 estimation is about 100 machines :)
Contents
Done
Hardware
- vinyl couplings
- faston ferules
- 603zz bearings
- spiral wrapping band
- aluminium extrusions
- t-nuts
- rolls of kapton
- springs
- bolts, nuts, washers, threaded rods
- bowden tubing
Electronic
- fans
- endstops
- male plugs
- big blue switches
- thermistors
- ferules
- heatshrink tubing
- 18,22 and 26 AWG wires (power, heat, sensors)
Misc.
- tweezers
- Shipping box for the kits
Custom Parts
- reprap.org plate
In Progress
Hardware
- smooth rods
- direct drive gears
- pulleys (80/200)
- belts
- bed plates (30/100)
- linear bearings
- pneumatic fittings
- heatsinks
Electronic
- power supplies
- heatsink grease
- wirewound resistors
- Melzi boards (25/50)
- female psu cables
- usb to mini-usb cables
- Nema 14 motors (50%)
Custom parts
- y-carriage
- frame-underplate
- Hotends
To Do
Hardware
- machine the heatsinks
- cut the threaded rods
Electronic
Custom Parts
- printed parts : leveraging the community printing power, especially for this batch : FoldaRap_Distributed_Manufacturing
