File:Ultimaker-LCD-Add-on.JPG

From RepRap
Jump to: navigation, search
Original file ‎(2,816 × 2,112 pixels, file size: 1.26 MB, MIME type: image/jpeg)

This is an add-on PCB for the LCD that works with the RepRapUltimaker5D firmware. You can connect it with a simple 10-pin IDC cable.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current11:57, 26 November 2010Thumbnail for version as of 11:57, 26 November 20102,816 × 2,112 (1.26 MB)ErikDeBruijn (talk | contribs)This is an add-on PCB for the LCD that works with the RepRapUltimaker5D firmware. You can connect it with a simple 10-pin IDC cable.
  • You cannot overwrite this file.

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Camera manufacturerCanon
Camera modelCanon DIGITAL IXUS 90 IS
Exposure time1/8 sec (0.125)
F Numberf/2.8
ISO speed rating200
Date and time of data generation16:27, 11 October 2010
Lens focal length6.2 mm
OrientationNormal
Horizontal resolution180 dpi
Vertical resolution180 dpi
File change date and time16:27, 11 October 2010
Y and C positioningCentered
Exif version2.2
Date and time of digitizing16:27, 11 October 2010
Meaning of each component
  1. Y
  2. Cb
  3. Cr
  4. does not exist
Image compression mode3
APEX shutter speed3
APEX aperture2.96875
APEX exposure bias0
Maximum land aperture2.96875 APEX (f/2.8)
Metering modePattern
FlashFlash did not fire, compulsory flash suppression
Retrieved from "https://reprap.org/mediawiki/index.php?title=File:Ultimaker-LCD-Add-on.JPG&oldid=24200"